hwmon: Cleaning hwmon devices

Clean Makefile
Move device specific values to driver for better reading

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>

diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 065433a6088942d2ace9bf98f21fc12e945886c6..61b028f53689dea917be17a7bc6e769b076be8e0 100644 (file)
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -30,13 +30,13 @@ include $(TOPDIR)/config.mk
 
 LIB    = $(obj)libhwmon.a
 
-COBJS-y += adm1021.o
-COBJS-y += ds1621.o
-COBJS-y += ds1722.o
-COBJS-y += ds1775.o
+COBJS-$(CONFIG_DTT_ADM1021) += adm1021.o
+COBJS-$(CONFIG_DTT_DS1621) += ds1621.o
+COBJS-$(CONFIG_DS1722) += ds1722.o
+COBJS-$(CONFIG_DTT_DS1775) += ds1775.o
 COBJS-$(CONFIG_DTT_LM73) += lm73.o
-COBJS-y += lm75.o
-COBJS-y += lm81.o
+COBJS-$(CONFIG_DTT_LM75) += lm75.o
+COBJS-$(CONFIG_DTT_LM81) += lm81.o
 
 COBJS  := $(COBJS-y)
 SRCS   := $(COBJS:.o=.c)

diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 9f65cfb2740169adbd6f38eb6abcd18f8bb7896b..b791ec0415b1e9254988e5b140067524daf3d34c 100644 (file)
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -33,11 +33,40 @@
 
 #include <common.h>
 
-#ifdef CONFIG_DTT_ADM1021
-
 #include <i2c.h>
 #include <dtt.h>
 
+#define DTT_READ_LOC_VALUE     0x00
+#define DTT_READ_REM_VALUE     0x01
+#define DTT_READ_STATUS                0x02
+#define DTT_READ_CONFIG                0x03
+#define DTT_READ_CONVRATE      0x04
+#define DTT_READ_LOC_HIGHLIM   0x05
+#define DTT_READ_LOC_LOWLIM    0x06
+#define DTT_READ_REM_HIGHLIM   0x07
+#define DTT_READ_REM_LOWLIM    0x08
+#define DTT_READ_DEVID         0xfe
+
+#define DTT_WRITE_CONFIG       0x09
+#define DTT_WRITE_CONVRATE     0x0a
+#define DTT_WRITE_LOC_HIGHLIM  0x0b
+#define DTT_WRITE_LOC_LOWLIM   0x0c
+#define DTT_WRITE_REM_HIGHLIM  0x0d
+#define DTT_WRITE_REM_LOWLIM   0x0e
+#define DTT_WRITE_ONESHOT      0x0f
+
+#define DTT_STATUS_BUSY                0x80    /* 1=ADC Converting */
+#define DTT_STATUS_LHIGH       0x40    /* 1=Local High Temp Limit Tripped */
+#define DTT_STATUS_LLOW                0x20    /* 1=Local Low Temp Limit Tripped */
+#define DTT_STATUS_RHIGH       0x10    /* 1=Remote High Temp Limit Tripped */
+#define DTT_STATUS_RLOW                0x08    /* 1=Remote Low Temp Limit Tripped */
+#define DTT_STATUS_OPEN                0x04    /* 1=Remote Sensor Open-Circuit */
+
+#define DTT_CONFIG_ALERT_MASKED        0x80    /* 0=ALERT Enabled, 1=ALERT Masked */
+#define DTT_CONFIG_STANDBY     0x40    /* 0=Run, 1=Standby */
+
+#define DTT_ADM1021_DEVID      0x41
+
 typedef
        struct {
                uint i2c_addr:7;        /* 7bit i2c chip address */
@@ -170,5 +199,3 @@ dtt_get_temp (int sensor)
 
        return (int) val;
 } /* dtt_get_temp() */
-
-#endif /* CONFIG_DTT_ADM1021 */

diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 494818131f1a2090017a07722203aa743e2b6174..749aa2691b289d5605708f9940ff92dcb1cf60d5 100644 (file)
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -27,7 +27,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_DTT_DS1621
 #if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
        (CFG_EEPROM_PAGE_WRITE_BITS < 1)
 # error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_DS1621"
@@ -39,6 +38,14 @@
  * Device code
  */
 #define DTT_I2C_DEV_CODE 0x48                  /* Dallas Semi's DS1621 */
+#define DTT_READ_TEMP          0xAA
+#define DTT_READ_COUNTER       0xA8
+#define DTT_READ_SLOPE         0xA9
+#define DTT_WRITE_START_CONV   0xEE
+#define DTT_WRITE_STOP_CONV    0x22
+#define DTT_TEMP_HIGH          0xA1
+#define DTT_TEMP_LOW           0xA2
+#define DTT_CONFIG             0xAC
 
 int dtt_read(int sensor, int reg)
 {
@@ -185,6 +192,3 @@ int dtt_get_temp(int sensor)
 
     return (dtt_read(sensor, DTT_READ_TEMP) / 256);
 } /* dtt_get_temp() */
-
-
-#endif /* CONFIG_DTT_DS1621 */

diff --git a/drivers/hwmon/ds1722.c b/drivers/hwmon/ds1722.c
index c19ee01393f087af4c294836d97d41bb911cee57..7e2f1ed4fb01bf171e8d3b2439eaf4d3f6ebc1d7 100644 (file)
--- a/drivers/hwmon/ds1722.c
+++ b/drivers/hwmon/ds1722.c
@@ -1,8 +1,5 @@
 
 #include <common.h>
-
-#ifdef CONFIG_DS1722
-
 #include <ssi.h>
 
 static void ds1722_select(int dev)
@@ -138,5 +135,3 @@ int ds1722_probe(int dev)
        printf("%d.%d deg C\n\n", (char)(temp >> 8), temp & 0xff);
        return 0;
 }
-
-#endif

diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c
index 0fbb0b42a789d96fd4448c6fe2a929e578860ccf..6a4d8e56db31a1c58cb5bbe42ca635998e069d00 100644 (file)
--- a/drivers/hwmon/ds1775.c
+++ b/drivers/hwmon/ds1775.c
@@ -21,11 +21,14 @@
 
 #include <common.h>
 
-#ifdef CONFIG_DTT_DS1775
 #include <i2c.h>
 #include <dtt.h>
 
 #define DTT_I2C_DEV_CODE       CFG_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
+#define DTT_READ_TEMP          0x0
+#define DTT_CONFIG             0x1
+#define DTT_TEMP_HYST          0x2
+#define DTT_TEMP_OS            0x3
 
 int dtt_read(int sensor, int reg)
 {
@@ -151,6 +154,3 @@ int dtt_get_temp(int sensor)
 {
        return (dtt_read(sensor, DTT_READ_TEMP) / 256);
 }
-
-
-#endif /* CONFIG_DTT_DS1775 */

diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index 98e8bd298476e4150811ebdbd0482e6893b75dd9..dd246835362040cc365217d33bb5e88d84050e1c 100644 (file)
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -38,6 +38,12 @@
  * Device code
  */
 #define DTT_I2C_DEV_CODE 0x48  /* National Semi's LM73 device */
+#define DTT_READ_TEMP          0x0
+#define DTT_CONFIG             0x1
+#define DTT_TEMP_HIGH          0x2
+#define DTT_TEMP_LOW           0x3
+#define DTT_CONTROL            0x4
+#define DTT_ID                 0x7
 
 int dtt_read(int const sensor, int const reg)
 {

diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index c34851725ef75095bee305298124c3ecaf5f5eb3..8051cb228c09d6cc410f13d4315ee66a42783e8a 100644 (file)
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -27,7 +27,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_DTT_LM75
 #if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
        (CFG_EEPROM_PAGE_WRITE_BITS < 1)
 # error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than  1 to use CONFIG_DTT_LM75"
@@ -36,11 +35,14 @@
 #include <i2c.h>
 #include <dtt.h>
 
-
 /*
  * Device code
  */
 #define DTT_I2C_DEV_CODE 0x48                  /* ON Semi's LM75 device */
+#define DTT_READ_TEMP          0x0
+#define DTT_CONFIG             0x1
+#define DTT_TEMP_HYST          0x2
+#define DTT_TEMP_SET           0x3
 
 int dtt_read(int sensor, int reg)
 {
@@ -200,5 +202,3 @@ int dtt_get_temp(int sensor)
     }
     return (int)((int16_t) ret / 256);
 } /* dtt_get_temp() */
-
-#endif /* CONFIG_DTT_LM75 */

diff --git a/drivers/hwmon/lm81.c b/drivers/hwmon/lm81.c
index 03bc53d58c421e631ffe01210b9b1fa848b25a4f..9349eb6ff685e71f1b341a4b44cb1db13a32bd53 100644 (file)
--- a/drivers/hwmon/lm81.c
+++ b/drivers/hwmon/lm81.c
@@ -32,7 +32,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_DTT_LM81
 #if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
        (CFG_EEPROM_PAGE_WRITE_BITS < 1)
 # error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than  1 to use CONFIG_DTT_LM81"
@@ -45,6 +44,11 @@
  * Device code
  */
 #define DTT_I2C_DEV_CODE 0x2c                  /* ON Semi's LM81 device */
+#define DTT_READ_TEMP          0x27
+#define DTT_CONFIG_TEMP                0x4b
+#define DTT_TEMP_MAX           0x39
+#define DTT_TEMP_HYST          0x3a
+#define DTT_CONFIG             0x40
 
 int dtt_read(int sensor, int reg)
 {
@@ -144,5 +148,3 @@ int dtt_get_temp(int sensor)
 
        return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10;
 } /* dtt_get_temp() */
-
-#endif /* CONFIG_DTT_LM81 */

diff --git a/include/dtt.h b/include/dtt.h
index 4e8aaad87fef82140f416b6ccb956b710e3ca3bb..34053d10abfbfb52ef3ebbe606ec5f040b775ceb 100644 (file)
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -40,9 +40,11 @@
 #define DTT_COMMERCIAL_MAX_TEMP        70              /* 0 - +70 C */
 #define DTT_INDUSTRIAL_MAX_TEMP        85              /* -40 - +85 C */
 #define DTT_AUTOMOTIVE_MAX_TEMP        105             /* -40 - +105 C */
+
 #ifndef CFG_DTT_MAX_TEMP
 #define CFG_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP
 #endif
+
 #ifndef CFG_DTT_HYSTERESIS
 #define CFG_DTT_HYSTERESIS     5               /* 5 C */
 #endif
@@ -54,79 +56,4 @@ extern int dtt_write(int sensor, int reg, int val);
 extern int dtt_get_temp(int sensor);
 #endif
 
-#if defined(CONFIG_DTT_LM75)
-#define DTT_READ_TEMP          0x0
-#define DTT_CONFIG             0x1
-#define DTT_TEMP_HYST          0x2
-#define DTT_TEMP_SET           0x3
-#endif
-
-#if defined(CONFIG_DTT_LM81)
-#define DTT_READ_TEMP          0x27
-#define DTT_CONFIG_TEMP                0x4b
-#define DTT_TEMP_MAX           0x39
-#define DTT_TEMP_HYST          0x3a
-#define DTT_CONFIG             0x40
-#endif
-
-#if defined(CONFIG_DTT_DS1621)
-#define DTT_READ_TEMP          0xAA
-#define DTT_READ_COUNTER       0xA8
-#define DTT_READ_SLOPE         0xA9
-#define DTT_WRITE_START_CONV   0xEE
-#define DTT_WRITE_STOP_CONV    0x22
-#define DTT_TEMP_HIGH          0xA1
-#define DTT_TEMP_LOW           0xA2
-#define DTT_CONFIG             0xAC
-#endif
-
-#if defined(CONFIG_DTT_DS1775)
-#define DTT_READ_TEMP          0x0
-#define DTT_CONFIG             0x1
-#define DTT_TEMP_HYST          0x2
-#define DTT_TEMP_OS            0x3
-#endif
-
-#if defined(CONFIG_DTT_ADM1021)
-#define DTT_READ_LOC_VALUE     0x00
-#define DTT_READ_REM_VALUE     0x01
-#define DTT_READ_STATUS                0x02
-#define DTT_READ_CONFIG                0x03
-#define DTT_READ_CONVRATE      0x04
-#define DTT_READ_LOC_HIGHLIM   0x05
-#define DTT_READ_LOC_LOWLIM    0x06
-#define DTT_READ_REM_HIGHLIM   0x07
-#define DTT_READ_REM_LOWLIM    0x08
-#define DTT_READ_DEVID         0xfe
-
-#define DTT_WRITE_CONFIG       0x09
-#define DTT_WRITE_CONVRATE     0x0a
-#define DTT_WRITE_LOC_HIGHLIM  0x0b
-#define DTT_WRITE_LOC_LOWLIM   0x0c
-#define DTT_WRITE_REM_HIGHLIM  0x0d
-#define DTT_WRITE_REM_LOWLIM   0x0e
-#define DTT_WRITE_ONESHOT      0x0f
-
-#define DTT_STATUS_BUSY                0x80    /* 1=ADC Converting */
-#define DTT_STATUS_LHIGH       0x40    /* 1=Local High Temp Limit Tripped */
-#define DTT_STATUS_LLOW                0x20    /* 1=Local Low Temp Limit Tripped */
-#define DTT_STATUS_RHIGH       0x10    /* 1=Remote High Temp Limit Tripped */
-#define DTT_STATUS_RLOW                0x08    /* 1=Remote Low Temp Limit Tripped */
-#define DTT_STATUS_OPEN                0x04    /* 1=Remote Sensor Open-Circuit */
-
-#define DTT_CONFIG_ALERT_MASKED        0x80    /* 0=ALERT Enabled, 1=ALERT Masked */
-#define DTT_CONFIG_STANDBY     0x40    /* 0=Run, 1=Standby */
-
-#define DTT_ADM1021_DEVID      0x41
-#endif
-
-#if defined(CONFIG_DTT_LM73)
-#define DTT_READ_TEMP          0x0
-#define DTT_CONFIG             0x1
-#define DTT_TEMP_HIGH          0x2
-#define DTT_TEMP_LOW           0x3
-#define DTT_CONTROL            0x4
-#define DTT_ID                 0x7
-#endif
-
 #endif /* _DTT_H_ */