ath79: Create shared dtsi for DIR-859

Create a shared dtsi for the dir-859 and similarly device, it similarly as it done for the dir-842.

Signed-off-by: Jan Forman <jforman@tuta.io>

diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
index 140f0b65c6013a2a12558967d45a1bb0a1bee89b..a828f86cb16e43cc18acac591a2ca3fab965677d 100644 (file)
--- a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
@@ -1,9 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca956x.dtsi"
-
+#include "qca9563_dlink_dir-8x9-a1.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
 
 / {
        model = "D-Link DIR-859 A1";
@@ -40,113 +38,4 @@
                        linux,default-trigger = "phy0tpt";
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               wps {
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <50000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "bootloader";
-                               reg = <0x000000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "bdcfg";
-                               reg = <0x040000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               label = "devdata";
-                               reg = <0x050000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "devconf";
-                               reg = <0x060000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@70000 {
-                               compatible = "seama";
-                               label = "firmware";
-                               reg = <0x070000 0xf80000>;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-               phy-mode = "sgmii";
-               qca,mib-poll-interval = <500>;
-
-               reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-
-               qca,ar8327-initvals = <
-                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-                       0x10 0x81000080 /* POWER_ON_STRAP */
-                       0x50 0xcc35cc35 /* LED_CTRL0 */
-                       0x54 0xcb37cb37 /* LED_CTRL1 */
-                       0x58 0x00000000 /* LED_CTRL2 */
-                       0x5c 0x00f3cf00 /* LED_CTRL3 */
-                       0x7c 0x0000007e /* PORT0_STATUS */
-                       >;
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       pll-data = <0x03000101 0x00000101 0x00001919>;
-
-       phy-mode = "sgmii";
-       phy-handle = <&phy0>;
-};
-
-&wmac {
-       status = "okay";
-
-       qca,no-eeprom;
 };

diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
new file mode 100644 (file)
index 0000000..65948ec
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+
+       keys {
+               compatible = "gpio-keys";
+
+               wps {
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "bootloader";
+                               reg = <0x000000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "bdcfg";
+                               reg = <0x040000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "devdata";
+                               reg = <0x050000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "devconf";
+                               reg = <0x060000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               compatible = "seama";
+                               label = "firmware";
+                               reg = <0x070000 0xf80000>;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               phy-mode = "sgmii";
+               qca,mib-poll-interval = <500>;
+
+               reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+
+               qca,ar8327-initvals = <
+                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+                       0x10 0x81000080 /* POWER_ON_STRAP */
+                       0x50 0xcc35cc35 /* LED_CTRL0 */
+                       0x54 0xcb37cb37 /* LED_CTRL1 */
+                       0x58 0x00000000 /* LED_CTRL2 */
+                       0x5c 0x00f3cf00 /* LED_CTRL3 */
+                       0x7c 0x0000007e /* PORT0_STATUS */
+                       >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       pll-data = <0x03000101 0x00000101 0x00001919>;
+
+       phy-mode = "sgmii";
+       phy-handle = <&phy0>;
+};
+
+&wmac {
+       status = "okay";
+
+       qca,no-eeprom;
+};