--- /dev/null
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rt-n56u", "ralink,rt3662-soc", "ralink,rt3883-soc";
+ model = "Asus RT-N56U";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ nor-flash@1c000000 {
+ compatible = "cfi-flash";
+ reg = <0x1c000000 0x800000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x0030000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "u-boot-env";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ reg = <0x00050000 0x007b0000>;
+ label = "firmware";
+ };
+ };
+ };
+
+ rtl8367 {
+ compatible = "realtek,rtl8367";
+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "rt-n56u:blue:power";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "rt-n56u:blue:lan";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "rt-n56u:blue:wan";
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "rt-n56u:blue:usb";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+};
+
+&pci {
+ status = "okay";
+};
+
+&pci1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci1814,3091";
+ reg = <0x10000 0 0 0 0>;
+ ralink,mtd-eeprom = <&factory 0x8000>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,2ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-645", "ralink,rt3662-soc", "ralink,rt3883-soc";
+ model = "D-Link DIR-645";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ rtl8367b {
+ compatible = "realtek,rtl8367b";
+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ inet {
+ label = "dir-645:green:inet";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "dir-645:green:wps";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x4000>;
+ read-only;
+ };
+
+ factory: partition@34000 {
+ label = "factory";
+ reg = <0x34000 0x4000>;
+ read-only;
+ };
+
+ partition@38000 {
+ label = "nvram";
+ reg = <0x38000 0x8000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "devdata";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 0>;
+ };
+};
+
+&wmac {
+ ralink,5ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "edimax,br-6475nd", "ralink,rt3662-soc", "ralink,rt3883-soc";
+ model = "Edimax BR-6475nD";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "br-6475nd:green:power";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "br-6475nd:amber:wlan";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan_5ghz {
+ label = "br-6475nd:amber:wlan_5ghz";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ nor-flash@1c000000 {
+ compatible = "cfi-flash";
+ reg = <0x1c000000 0x800000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x00000000 0x00030000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "nvram";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
+
+ devdata: partition@50000 {
+ reg = <0x00050000 0x00020000>;
+ label = "devdata";
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "edimax,uimage";
+ reg = <0x00070000 0x00790000>;
+ label = "firmware";
+ };
+ };
+ };
+
+ rtl8367 {
+ compatible = "realtek,rtl8367";
+ gpio-sda = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
+ };
+
+ /*
+ * Unclear if this is the correct gpio setup; the USB ports are
+ * unpopulated on a stock BR-6475nD, even though the hardware exists
+ * and the headers are there.
+ */
+ /*
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name="usb";
+ gpio-export,output=<0>;
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+ */
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&timer {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&uartlite {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&devdata 0x0d>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pci {
+ status = "okay";
+};
+
+&pci1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x10000 0 0 0 0>;
+ ralink,5ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0x8000>;
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+/ {
+ compatible = "loewe,wmdr-143n", "ralink,rt3662-soc", "ralink,rt3883-soc";
+ model = "Loewe WMDR-143N";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x00010000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ port@0 {
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ };
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "mii";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "omnima,hpm", "ralink,rt3662-soc", "ralink,rt3883-soc";
+ model = "Omnima HPM";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "hpm:orange:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status: status {
+ label = "hpm:green:status";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ eth {
+ label = "hpm:green:eth";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ eth2 {
+ label = "hpm:red:eth";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "hpm:green:wifi";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2 {
+ label = "hpm:red:wifi";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+ /* gpio 12 and 13 handle the OC input */
+
+ usb0 {
+ gpio-export,name = "usb0";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb1 {
+ gpio-export,name = "usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x0030000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "config";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ reg = <0x00050000 0x00fb0000>;
+ label = "firmware";
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii";
+ mtd-mac-address = <&factory 0x28>;
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "samsung,cy-swr1100", "ralink,rt3662-soc", "ralink,rt3883-soc";
+ model = "Samsung CY-SWR1100";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ };
+
+ nor-flash@1c000000 {
+ compatible = "cfi-flash";
+ reg = <0x1c000000 0x800000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x4000>;
+ read-only;
+ };
+
+ factory: partition@34000 {
+ label = "factory";
+ reg = <0x34000 0x4000>;
+ read-only;
+ };
+
+ partition@38000 {
+ label = "nvram";
+ reg = <0x38000 0x8000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "devdata";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ rtl8367 {
+ compatible = "realtek,rtl8367";
+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wps: wps {
+ label = "cy-swr1100:blue:wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "cy-swr1100:blue:usb";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+};
+
+&pci {
+ status = "okay";
+};
+
+&pci1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x10000 0 0 0 0>;
+ ralink,5ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0x2000>;
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,2ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,rt-n56u", "ralink,rt3883-soc";
- model = "Asus RT-N56U";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- nor-flash@1c000000 {
- compatible = "cfi-flash";
- reg = <0x1c000000 0x800000>;
- bank-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x0030000>;
- label = "u-boot";
- read-only;
- };
-
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "u-boot-env";
- read-only;
- };
-
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- reg = <0x00050000 0x007b0000>;
- label = "firmware";
- };
- };
- };
-
- rtl8367 {
- compatible = "realtek,rtl8367";
- gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "rt-n56u:blue:power";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "rt-n56u:blue:lan";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "rt-n56u:blue:wan";
- gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "rt-n56u:blue:usb";
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
- };
-};
-
-&pci {
- status = "okay";
-};
-
-&pci1 {
- status = "okay";
-
- wifi@0,0 {
- compatible = "pci1814,3091";
- reg = <0x10000 0 0 0 0>;
- ralink,mtd-eeprom = <&factory 0x8000>;
- };
-};
-
-&wmac {
- status = "okay";
- ralink,2ghz = <0>;
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-645", "ralink,rt3883-soc";
- model = "D-Link DIR-645";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- rtl8367b {
- compatible = "realtek,rtl8367b";
- gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- inet {
- label = "dir-645:green:inet";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- };
-
- led_wps: wps {
- label = "dir-645:green:wps";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x4000>;
- read-only;
- };
-
- factory: partition@34000 {
- label = "factory";
- reg = <0x34000 0x4000>;
- read-only;
- };
-
- partition@38000 {
- label = "nvram";
- reg = <0x38000 0x8000>;
- read-only;
- };
-
- partition@40000 {
- label = "devdata";
- reg = <0x40000 0x10000>;
- };
-
- partition@50000 {
- compatible = "seama";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- mediatek,fixed-link = <1000 1 1 0>;
- };
-};
-
-&wmac {
- ralink,5ghz = <0>;
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "edimax,br-6475nd", "ralink,rt3883-soc";
- model = "Edimax BR-6475nD";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_SW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "br-6475nd:green:power";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "br-6475nd:amber:wlan";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan_5ghz {
- label = "br-6475nd:amber:wlan_5ghz";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- nor-flash@1c000000 {
- compatible = "cfi-flash";
- reg = <0x1c000000 0x800000>;
- bank-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x00000000 0x00030000>;
- label = "u-boot";
- read-only;
- };
-
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "nvram";
- read-only;
- };
-
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
-
- devdata: partition@50000 {
- reg = <0x00050000 0x00020000>;
- label = "devdata";
- read-only;
- };
-
- partition@70000 {
- compatible = "edimax,uimage";
- reg = <0x00070000 0x00790000>;
- label = "firmware";
- };
- };
- };
-
- rtl8367 {
- compatible = "realtek,rtl8367";
- gpio-sda = <&gpio0 5 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio0 4 GPIO_ACTIVE_HIGH>;
- realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
- };
-
- /*
- * Unclear if this is the correct gpio setup; the USB ports are
- * unpopulated on a stock BR-6475nD, even though the hardware exists
- * and the headers are there.
- */
- /*
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name="usb";
- gpio-export,output=<0>;
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- };
- };
- */
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&timer {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&uartlite {
- status = "okay";
-};
-
-ðernet {
- status = "okay";
- mtd-mac-address = <&devdata 0x0d>;
-
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
- };
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pci {
- status = "okay";
-};
-
-&pci1 {
- status = "okay";
-
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x10000 0 0 0 0>;
- ralink,5ghz = <0>;
- ralink,mtd-eeprom = <&factory 0x8000>;
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-/ {
- compatible = "loewe,wmdr-143n", "ralink,rt3883-soc";
- model = "Loewe WMDR-143N";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x00010000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-ðernet {
- port@0 {
- phy-handle = <&phy0>;
- phy-mode = "mii";
- };
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "mii";
- };
- };
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "omnima,hpm", "ralink,rt3883-soc";
- model = "Omnima HPM";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "hpm:orange:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- led_status: status {
- label = "hpm:green:status";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- eth {
- label = "hpm:green:eth";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
-
- eth2 {
- label = "hpm:red:eth";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "hpm:green:wifi";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
- wifi2 {
- label = "hpm:red:wifi";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
- /* gpio 12 and 13 handle the OC input */
-
- usb0 {
- gpio-export,name = "usb0";
- gpio-export,output = <1>;
- gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- };
-
- usb1 {
- gpio-export,name = "usb1";
- gpio-export,output = <1>;
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <25000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x0030000>;
- label = "u-boot";
- read-only;
- };
-
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "config";
- read-only;
- };
-
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- reg = <0x00050000 0x00fb0000>;
- label = "firmware";
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- phy-handle = <&phy0>;
- phy-mode = "rgmii";
- mtd-mac-address = <&factory 0x28>;
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@4 {
- reg = <4>;
- };
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "samsung,cy-swr1100", "ralink,rt3883-soc";
- model = "Samsung CY-SWR1100";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- };
-
- nor-flash@1c000000 {
- compatible = "cfi-flash";
- reg = <0x1c000000 0x800000>;
- bank-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x4000>;
- read-only;
- };
-
- factory: partition@34000 {
- label = "factory";
- reg = <0x34000 0x4000>;
- read-only;
- };
-
- partition@38000 {
- label = "nvram";
- reg = <0x38000 0x8000>;
- read-only;
- };
-
- partition@40000 {
- label = "devdata";
- reg = <0x40000 0x10000>;
- };
-
- partition@50000 {
- compatible = "seama";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- rtl8367 {
- compatible = "realtek,rtl8367";
- gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wps: wps {
- label = "cy-swr1100:blue:wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "cy-swr1100:blue:usb";
- gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- port@0 {
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-};
-
-&pci {
- status = "okay";
-};
-
-&pci1 {
- status = "okay";
-
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x10000 0 0 0 0>;
- ralink,5ghz = <0>;
- ralink,mtd-eeprom = <&factory 0x2000>;
- };
-};
-
-&wmac {
- status = "okay";
- ralink,2ghz = <0>;
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
endef
define Device/asus_rt-n56u
- MTK_SOC := rt3883
+ MTK_SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
IMAGE/sysupgrade.bin += | mkrtn56uimg -s
define Device/dlink_dir-645
$(Device/seama)
- MTK_SOC := rt3883
+ MTK_SOC := rt3662
BLOCKSIZE := 4k
IMAGE_SIZE := 7872k
KERNEL := $(KERNEL_DTB)
TARGET_DEVICES += dlink_dir-645
define Device/edimax_br-6475nd
- MTK_SOC := rt3883
+ MTK_SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 7744k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
TARGET_DEVICES += edimax_br-6475nd
define Device/loewe_wmdr-143n
- MTK_SOC := rt3883
+ MTK_SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Loewe
TARGET_DEVICES += loewe_wmdr-143n
define Device/omnima_hpm
- MTK_SOC := rt3883
+ MTK_SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Omnima
define Device/samsung_cy-swr1100
$(Device/seama)
- MTK_SOC := rt3883
+ MTK_SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
KERNEL := $(KERNEL_DTB)
projects / openwrt / staging / ynezz.git / commitdiff