mvebu: add LED support for GL.iNet GL-MV1000

This patch enables LED support for the GL.iNet GL-MV1000

Signed-off-by: Jeff Collins <jeffcollins9292@gmail.com>
[add SPDX identifier on new file, add aliases, minor cosmetic issues]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/mvebu/cortexa53/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa53/base-files/etc/board.d/01_leds
new file mode 100755 (executable)
index 0000000..42f4deb
--- /dev/null
+++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/01_leds
@@ -0,0 +1,18 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+glinet,gl-mv1000)
+       ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
+       ;;
+esac
+
+board_config_flush
+
+exit 0

diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index 86c33fa100a5928433fffd3dc8b3f0a2b6483c58..0e15debdea07668d8525e4884184151e6247f8a9 100644 (file)
--- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -8,6 +8,13 @@
        model = "GL.iNet GL-MV1000";
        compatible = "glinet,gl-mv1000", "marvell,armada3720";
 
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
        chosen {
                stdout-path = "serial0:115200n8";
        };
@@ -23,12 +30,32 @@
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <3300000>;
                regulator-boot-on;
-        
+
                gpios-states = <0>;
                states = <1800000 0x1
                        3300000 0x0>;
                enable-active-high;
        };
+
+       leds {
+               compatible = "gpio-leds";
+
+               vpn {
+                       label = "green:vpn";
+                       gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "green:wan";
+                       gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power: power {
+                       label = "green:power";
+                       gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+       };
 };
 
 &spi0 {