--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2022, Matthew Hagan <mnhagan88@gmail.com> */
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-ac-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Edgecore EAP102";
+ compatible = "edgecore,eap102", "qcom,ipq8074";
+
+ aliases {
+ serial0 = &blsp1_uart5;
+ serial1 = &blsp1_uart3;
+ led-boot = &led_system_green;
+ led-failsafe = &led_system_green;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_green;
+ /* Aliases as required by u-boot to patch MAC addresses */
+ ethernet0 = &dp5;
+ ethernet1 = &dp6;
+ label-mac-device = &dp5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-append = " root=/dev/ubiblock0_1";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 66 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wanpoe {
+ label = "green:wanpoe";
+ gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_wlan2g {
+ label = "green:wlan2g";
+ gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1radio";
+ };
+
+ led_wlan5g {
+ label = "green:wlan5g";
+ gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0radio";
+ };
+
+ led_system_green: led_system {
+ label = "green:power";
+ gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ reset_button {
+ pins = "gpio66";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:sbl1";
+ reg = <0x0 0x50000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "0:mibib";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "0:bootconfig";
+ reg = <0x60000 0x20000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "0:bootconfig1";
+ reg = <0x80000 0x20000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "0:qsee";
+ reg = <0xa0000 0x180000>;
+ read-only;
+ };
+
+ partition@220000 {
+ label = "0:qsee_1";
+ reg = <0x220000 0x180000>;
+ read-only;
+ };
+
+ partition@3a0000 {
+ label = "0:devcfg";
+ reg = <0x3a0000 0x10000>;
+ read-only;
+ };
+
+ partition@3b0000 {
+ label = "0:devcfg_1";
+ reg = <0x3b0000 0x10000>;
+ read-only;
+ };
+
+ partition@3c0000 {
+ label = "0:apdp";
+ reg = <0x3c0000 0x10000>;
+ read-only;
+ };
+
+ partition@3d0000 {
+ label = "0:apdp_1";
+ reg = <0x3d0000 0x10000>;
+ read-only;
+ };
+
+ partition@3e0000 {
+ label = "0:rpm";
+ reg = <0x3e0000 0x40000>;
+ read-only;
+ };
+
+ partition@420000 {
+ label = "0:rpm_1";
+ reg = <0x420000 0x40000>;
+ read-only;
+ };
+
+ partition@460000 {
+ label = "0:cdt";
+ reg = <0x460000 0x10000>;
+ read-only;
+ };
+
+ partition@470000 {
+ label = "0:cdt_1";
+ reg = <0x470000 0x10000>;
+ read-only;
+ };
+
+ partition@480000 {
+ label = "0:appsblenv";
+ reg = <0x480000 0x10000>;
+ };
+
+ partition@490000 {
+ label = "0:appsbl";
+ reg = <0x490000 0xc0000>;
+ read-only;
+ };
+
+ partition@550000 {
+ label = "0:appsbl_1";
+ reg = <0x530000 0xc0000>;
+ read-only;
+ };
+
+ partition@610000 {
+ label = "0:art";
+ reg = <0x610000 0x40000>;
+ read-only;
+ };
+
+ partition@650000 {
+ label = "0:ethphyfw";
+ reg = <0x650000 0x80000>;
+ read-only;
+ };
+
+ partition@6d0000 {
+ label = "0:product_info";
+ reg = <0x6d0000 0x80000>;
+ read-only;
+ };
+
+ partition@750000 {
+ label = "priv_data1";
+ reg = <0x750000 0x10000>;
+ read-only;
+ };
+
+ partition@760000 {
+ label = "priv_data2";
+ reg = <0x760000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qusb_phy_0 {
+ status = "okay";
+};
+
+&ssphy_0 {
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "rootfs1";
+ reg = <0x0000000 0x3400000>;
+ };
+
+ partition@3400000 {
+ label = "0:wififw";
+ reg = <0x3400000 0x800000>;
+ read-only;
+ };
+
+ partition@3c00000 {
+ label = "rootfs2";
+ reg = <0x3c00000 0x3400000>;
+ };
+
+ partition@7000000 {
+ label = "0:wififw_1";
+ reg = <0x7000000 0x800000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ qca8081_24: ethernet-phy@24 {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <24>;
+ reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+ };
+
+ qca8081_28: ethernet-phy@28 {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <28>;
+ reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_cpu_bmp = <0x1>; /* cpu port bitmap */
+ switch_lan_bmp = <0x3e>; /* lan port bitmap */
+ switch_wan_bmp = <0x40>; /* wan port bitmap */
+ switch_mac_mode = <0xff>; /* mac mode for uniphy instance0*/
+ switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+ switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+ bm_tick_mode = <0>; /* bm tick mode */
+ tm_tick_mode = <0>; /* tm tick mode */
+
+ qcom,port_phyinfo {
+ port@4 {
+ port_id = <5>;
+ phy_address = <24>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ port@5 {
+ port_id = <6>;
+ phy_address = <28>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&dp5 {
+ status = "okay";
+ phy-handle = <&qca8081_28>;
+ label = "wan";
+};
+
+&dp6 {
+ status = "okay";
+ phy-handle = <&qca8081_24>;
+ label = "lan";
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,ath11k-calibration-variant = "Edgecore-EAP102";
+};
projects / openwrt / openwrt.git / commitdiff