buffalo,bhr-4grv2|\
devolo,magic-2-wifi|\
engenius,ecb1750|\
+engenius,ens202ext-v1|\
etactica,eg200|\
glinet,gl-ar750s-nor|\
glinet,gl-ar750s-nor-nand|\
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9341.dtsi"
+
+/ {
+ model = "Engenius ENS202EXT v1";
+ compatible = "engenius,ens202ext-v1", "qca,ar9341";
+
+ aliases {
+ serial0 = &uart;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "ens202ext-v1:amber:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "ens202ext-v1:amber:wlan";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ rssilow {
+ label = "ens202ext-v1:red:rssilow";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimedium {
+ label = "ens202ext-v1:amber:rssimedium";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ rssihigh {
+ label = "ens202ext-v1:green:rssihigh";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&firmware1 &firmware2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "openwrt,okli";
+ label = "firmware";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ label = "custom";
+ reg = <0x050000 0x050000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "loader";
+ reg = <0x0a0000 0x010000>;
+ read-only;
+ };
+
+ firmware2: partition@b0000 {
+ label = "firmware2";
+ reg = <0x0b0000 0x170000>;
+ };
+
+ partition@220000 {
+ label = "fakeroot";
+ reg = <0x220000 0x010000>;
+ };
+
+ firmware1: partition@230000 {
+ label = "firmware1";
+ reg = <0x230000 0xbc0000>;
+ };
+
+ partition@df0000 {
+ label = "failsafe";
+ reg = <0xdf0000 0x200000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
;;
+engenius,ens202ext-v1)
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:amber:rssimedium" "wlan0" "33" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "67" "100"
+ ;;
engenius,ews511ap)
ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth1"
ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth0"
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
;;
+ engenius,ens202ext-v1)
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan"
+ ;;
engenius,ews511ap)
ucidef_set_interface_lan "eth0 eth1" "dhcp"
;;
lan_mac=$(mtd_get_mac_binary "Board data" 2)
label_mac=$lan_mac
;;
- alfa-network,ap121f)
+ alfa-network,ap121f|\
+ engenius,ens202ext-v1)
label_mac=$(mtd_get_mac_binary art 0x1002)
;;
arduino,yun)
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX
-DEVICE_VARS += DAP_SIGNATURE
+DEVICE_VARS += DAP_SIGNATURE ENGENIUS_IMGNAME
define Build/add-elecom-factory-initramfs
$(eval edimax_model=$(word 1,$(1)))
-rm $@-empty.bin
endef
+# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
+# sysupgrade, as otherwise it will implant the old configuration from
+# OEM firmware when writing rootfs from factory.bin
+define Build/engenius-tar-gz
+ -[ -f "$@" ] && \
+ mkdir -p $@.tmp && \
+ echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
+ echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
+ $(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
+ $@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
+ $(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
+ $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -C $@.tmp . | gzip -9n > $@ && \
+ rm -rf $@.tmp
+endef
+
define Build/mkdapimg2
$(STAGING_DIR_HOST)/bin/mkdapimg2 \
-i $@ -o $@.new \
endef
TARGET_DEVICES += engenius_ecb1750
+define Device/engenius_loader_okli
+ DEVICE_VENDOR := EnGenius
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
+ LOADER_TYPE := bin
+ COMPILE := loader-$(1).bin loader-$(1).uImage
+ COMPILE/loader-$(1).bin := loader-okli-compile
+ COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
+ uImage lzma
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \
+ append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+ check-size | engenius-tar-gz $$$$(ENGENIUS_IMGNAME)
+endef
+
+define Device/engenius_ens202ext-v1
+ $(Device/engenius_loader_okli)
+ SOC := ar9341
+ DEVICE_MODEL := ENS202EXT
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := rssileds
+ IMAGE_SIZE := 12032k
+ LOADER_FLASH_OFFS := 0x230000
+ ENGENIUS_IMGNAME := senao-ens202ext
+endef
+TARGET_DEVICES += engenius_ens202ext-v1
+
define Device/engenius_epg5000
SOC := qca9558
DEVICE_VENDOR := EnGenius
projects / openwrt / staging / zorun.git / commitdiff