void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct txentry_desc *txdesc);
- int (*write_tx_data) (struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue, struct sk_buff *skb);
+ int (*write_tx_data) (struct queue_entry *entry);
int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb);
void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
/*
* Queue handlers.
*/
+int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb);
void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev);
void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev);
int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev);
memset(skbdesc, 0, sizeof(*skbdesc));
skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
- if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb)) {
+ if (rt2x00queue_write_tx_frame(queue, skb)) {
WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
return NETDEV_TX_BUSY;
}
}
}
- if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb)) {
+ if (rt2x00queue_write_tx_frame(queue, skb)) {
ieee80211_stop_queue(rt2x00dev->hw, qid);
return NETDEV_TX_BUSY;
}
if (rt2x00queue_full(queue))
ieee80211_stop_queue(rt2x00dev->hw, qid);
- if (rt2x00dev->ops->lib->kick_tx_queue)
- rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, qid);
-
return NETDEV_TX_OK;
}
EXPORT_SYMBOL_GPL(rt2x00mac_tx);
/*
* TX data handlers.
*/
-int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue, struct sk_buff *skb)
+int rt2x00pci_write_tx_data(struct queue_entry *entry)
{
- struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
struct queue_entry_priv_pci *entry_priv = entry->priv_data;
struct skb_frame_desc *skbdesc;
- struct txentry_desc txdesc;
u32 word;
- if (rt2x00queue_full(queue))
- return -EINVAL;
-
rt2x00_desc_read(entry_priv->desc, 0, &word);
- if (rt2x00_get_field32(word, TXD_ENTRY_OWNER_NIC) ||
- rt2x00_get_field32(word, TXD_ENTRY_VALID)) {
- ERROR(rt2x00dev,
- "Arrived at non-free entry in the non-full queue %d.\n"
+ /*
+ * This should not happen, we already checked the entry
+ * was ours. When the hardware disagrees there has been
+ * a queue corruption!
+ */
+ if (unlikely(rt2x00_get_field32(word, TXD_ENTRY_OWNER_NIC) ||
+ rt2x00_get_field32(word, TXD_ENTRY_VALID))) {
+ ERROR(entry->queue->rt2x00dev,
+ "Corrupt queue %d, accessing entry which is not ours.\n"
"Please file bug report to %s.\n",
entry->queue->qid, DRV_PROJECT);
return -EINVAL;
}
- /*
- * Copy all TX descriptor information into txdesc,
- * after that we are free to use the skb->cb array
- * for our information.
- */
- entry->skb = skb;
- rt2x00queue_create_tx_descriptor(entry, &txdesc);
-
/*
* Fill in skb descriptor
*/
- skbdesc = get_skb_frame_desc(skb);
+ skbdesc = get_skb_frame_desc(entry->skb);
memset(skbdesc, 0, sizeof(*skbdesc));
- skbdesc->data = skb->data;
- skbdesc->data_len = skb->len;
+ skbdesc->data = entry->skb->data;
+ skbdesc->data_len = entry->skb->len;
skbdesc->desc = entry_priv->desc;
- skbdesc->desc_len = queue->desc_size;
+ skbdesc->desc_len = entry->queue->desc_size;
skbdesc->entry = entry;
- memcpy(entry_priv->data, skb->data, skb->len);
-
- rt2x00queue_write_tx_descriptor(entry, &txdesc);
- rt2x00queue_index_inc(queue, Q_INDEX);
+ memcpy(entry_priv->data, entry->skb->data, entry->skb->len);
return 0;
}
rt2x00_set_field32(&word, TXD_ENTRY_VALID, 0);
rt2x00_desc_write(entry_priv->desc, 0, word);
+ __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
/*
memcpy_toio(rt2x00dev->csr.base + offset, value, length);
}
-/*
- * TX data handlers.
+/**
+ * rt2x00pci_write_tx_data - Initialize data for TX operation
+ * @entry: The entry where the frame is located
+ *
+ * This function will initialize the DMA and skb descriptor
+ * to prepare the entry for the actual TX operation.
*/
-int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue, struct sk_buff *skb);
+int rt2x00pci_write_tx_data(struct queue_entry *entry);
/**
* struct queue_entry_priv_pci: Per entry PCI specific information
}
EXPORT_SYMBOL_GPL(rt2x00queue_write_tx_descriptor);
+int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
+{
+ struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
+ struct txentry_desc txdesc;
+
+ if (unlikely(rt2x00queue_full(queue)))
+ return -EINVAL;
+
+ if (__test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
+ ERROR(queue->rt2x00dev,
+ "Arrived at non-free entry in the non-full queue %d.\n"
+ "Please file bug report to %s.\n",
+ queue->qid, DRV_PROJECT);
+ return -EINVAL;
+ }
+
+ /*
+ * Copy all TX descriptor information into txdesc,
+ * after that we are free to use the skb->cb array
+ * for our information.
+ */
+ entry->skb = skb;
+ rt2x00queue_create_tx_descriptor(entry, &txdesc);
+
+ if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
+ __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ return -EIO;
+ }
+
+ __set_bit(ENTRY_DATA_PENDING, &entry->flags);
+
+ rt2x00queue_index_inc(queue, Q_INDEX);
+ rt2x00queue_write_tx_descriptor(entry, &txdesc);
+
+ return 0;
+}
+
struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid queue)
{
ieee80211_wake_queue(rt2x00dev->hw, qid);
}
-int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue, struct sk_buff *skb)
+int rt2x00usb_write_tx_data(struct queue_entry *entry)
{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
- struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
struct queue_entry_priv_usb *entry_priv = entry->priv_data;
struct skb_frame_desc *skbdesc;
- struct txentry_desc txdesc;
u32 length;
- if (rt2x00queue_full(queue))
- return -EINVAL;
-
- if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
- ERROR(rt2x00dev,
- "Arrived at non-free entry in the non-full queue %d.\n"
- "Please file bug report to %s.\n",
- entry->queue->qid, DRV_PROJECT);
- return -EINVAL;
- }
-
- /*
- * Copy all TX descriptor information into txdesc,
- * after that we are free to use the skb->cb array
- * for our information.
- */
- entry->skb = skb;
- rt2x00queue_create_tx_descriptor(entry, &txdesc);
-
/*
* Add the descriptor in front of the skb.
*/
- skb_push(skb, queue->desc_size);
- memset(skb->data, 0, queue->desc_size);
+ skb_push(entry->skb, entry->queue->desc_size);
+ memset(entry->skb->data, 0, entry->queue->desc_size);
/*
* Fill in skb descriptor
*/
- skbdesc = get_skb_frame_desc(skb);
+ skbdesc = get_skb_frame_desc(entry->skb);
memset(skbdesc, 0, sizeof(*skbdesc));
- skbdesc->data = skb->data + queue->desc_size;
- skbdesc->data_len = skb->len - queue->desc_size;
- skbdesc->desc = skb->data;
- skbdesc->desc_len = queue->desc_size;
+ skbdesc->data = entry->skb->data + entry->queue->desc_size;
+ skbdesc->data_len = entry->skb->len - entry->queue->desc_size;
+ skbdesc->desc = entry->skb->data;
+ skbdesc->desc_len = entry->queue->desc_size;
skbdesc->entry = entry;
- rt2x00queue_write_tx_descriptor(entry, &txdesc);
-
/*
* USB devices cannot blindly pass the skb->len as the
* length of the data to usb_fill_bulk_urb. Pass the skb
* to the driver to determine what the length should be.
*/
- length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, skb);
-
- /*
- * Initialize URB and send the frame to the device.
- */
- __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
- __set_bit(ENTRY_DATA_PENDING, &entry->flags);
+ length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb);
- usb_fill_bulk_urb(entry_priv->urb, usb_dev, usb_sndbulkpipe(usb_dev, 1),
- skb->data, length, rt2x00usb_interrupt_txdone, entry);
-
- rt2x00queue_index_inc(queue, Q_INDEX);
+ usb_fill_bulk_urb(entry_priv->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, 1),
+ entry->skb->data, length,
+ rt2x00usb_interrupt_txdone, entry);
return 0;
}
*/
void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev);
-/*
- * TX data handlers.
+/**
+ * rt2x00usb_write_tx_data - Initialize URB for TX operation
+ * @entry: The entry where the frame is located
+ *
+ * This function will initialize the URB and skb descriptor
+ * to prepare the entry for the actual TX operation.
*/
-int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue, struct sk_buff *skb);
+int rt2x00usb_write_tx_data(struct queue_entry *entry);
/**
* struct queue_entry_priv_usb: Per entry USB specific information
projects / openwrt / staging / blogic.git / commitdiff