ath79: fix several issues for ZyXEL NBG6716

This fixes several issues introduced with ZyXEL NBG6716 support:
- Inhomogeneous indent
- Wrong ath10k MAC patching function
- Wrong brackets for pad-to in nand.mk
- Add missing DEVICE_MODEL
- Remove k2t.sh include (copy/paste leftover)

Fixes: 99835e09992b ("ath79: add support for ZyXEL NBG6716")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
index ea153d9f77efb11e72f535dec69a0782c26f14d6..3e373928da74d650d222755b36615f20256d0563 100644 (file)
--- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
+++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
@@ -76,21 +76,21 @@
                        debounce-interval = <60>;
                };
 
-               wifi_button {
-                        label = "WiFi button";
+               wifi_button {
+                       label = "WiFi button";
                        linux,code = <KEY_RFKILL>;
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
 
-               usb1 {
+               usb1 {
                        label = "USB1 eject button";
                        gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
 
-               usb2 {
-                        label = "USB2 eject button";
+               usb2 {
+                       label = "USB2 eject button";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
@@ -105,7 +105,7 @@
 };
 
 &gpio {
-       gpio_usb_power {
+       usb_power {
                gpio-hog;
                gpios = <16 0>;
                output-high;
@@ -262,7 +262,7 @@
 };
 
 &pcie1 {
-        status = "okay";
+       status = "okay";
 
        wifi@0,0 {
                compatible = "qcom,ath10k";
@@ -272,15 +272,15 @@
 };
 
 &usb_phy0 {
-        status = "okay";
+       status = "okay";
 };
 
 &usb_phy1 {
-        status = "okay";
+       status = "okay";
 };
 
 &usb0 {
-        status = "okay";
+       status = "okay";
 
        hub_port0: port@1 {
                reg = <1>;
@@ -290,7 +290,7 @@
 };
 
 &usb1 {
-        status = "okay";
+       status = "okay";
 
        hub_port1: port@1 {
                reg = <1>;

diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk
index 0f7514060e2718f916ad8ab46cffb328ae8c0939..ef6b607002055ec25333cca75de755274f972504 100644 (file)
--- a/target/linux/ath79/image/nand.mk
+++ b/target/linux/ath79/image/nand.mk
@@ -1,15 +1,15 @@
 include ./common-netgear.mk    # for netgear-uImage
 
 # attention: only zlib compression is allowed for the boot fs
-define  Build/zyxel-buildkerneljffs
-        rm -rf  $(KDIR_TMP)/zyxelnbg6716
-        mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot
-        cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage
-        $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
-                --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
-                -o $@ \
-                -d $(KDIR_TMP)/zyxelnbg6716/image
-        rm -rf $(KDIR_TMP)/zyxelnbg6716
+define Build/zyxel-buildkerneljffs
+       rm -rf  $(KDIR_TMP)/zyxelnbg6716
+       mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot
+       cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage
+       $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+               --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
+               -o $@ \
+               -d $(KDIR_TMP)/zyxelnbg6716/image
+       rm -rf $(KDIR_TMP)/zyxelnbg6716
 endef
 
 define Build/zyxel-factory
@@ -94,6 +94,7 @@ TARGET_DEVICES += netgear_wndr4300
 define Device/zyxel_nbg6716
   ATH_SOC := qca9558
   DEVICE_VENDOR := ZyXEL
+  DEVICE_MODEL := NBG6716
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
   RAS_BOARD := NBG6716
   RAS_ROOTFS_SIZE := 29696k
@@ -104,7 +105,7 @@ define Device/zyxel_nbg6716
   KERNEL := kernel-bin | append-dtb | uImage none | \
        zyxel-buildkerneljffs | check-size 4096k
   IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
-  IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
+  IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
   IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | zyxel-factory
   UBINIZE_OPTS := -E 5

diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 75fdd42cdd743a8e84cd1812949154ce1d536d0a..433d6475ddb315223289ef1751de919276d42bee 100644 (file)
--- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -3,7 +3,6 @@
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
 . /lib/functions/caldata.sh
-. /lib/functions/k2t.sh
 
 board=$(board_name)
 
@@ -12,7 +11,7 @@ case "$FIRMWARE" in
        case $board in
        zyxel,nbg6716)
                caldata_extract "art" 0x5000 0x844
-               ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
                ;;
        esac
        ;;