--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Teltonika RUT230 v1";
+ compatible = "teltonika,rut230-v1", "qca,ar9331";
+
+ aliases {
+ label-mac-device = &wmac;
+ led-boot = &led_ss0;
+ led-failsafe = &led_ss0;
+ led-upgrade = &led_ss0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ input {
+ label = "input";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ sim-tray {
+ label = "sim-tray";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_disable_pins>;
+
+ led_ss0: signal-strength-0 {
+ label = "green:signal-strength-0";
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal-strength-1 {
+ label = "green:signal-strength-1";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal-strength-2 {
+ label = "green:signal-strength-2";
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal-strength-3 {
+ label = "green:signal-strength-3";
+ gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ signal-strength-4 {
+ label = "green:signal-strength4";
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ 2g {
+ label = "green:2g";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ 3g {
+ label = "green:3g";
+ gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ /* GPIO 13 - ACTIVE HIGH for hwrev 0 */
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ /* GPIO 14 - ACTIVE HIGH for hwrev 0 */
+ };
+
+ /* 4G LED - GPIO21 ACTIVE_HIGH for RUT240 */
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&config 0x0>;
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&config 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ config: partition@20000 {
+ label = "config";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ art: partition@30000 {
+ label = "art";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x40000 0xf30000>;
+ };
+
+ partition@f70000 {
+ label = "event-log";
+ reg = <0xf70000 0x90000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+ status = "okay";
+};
+
+&gpio {
+ modem-power {
+ gpio-hog;
+ output-low;
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ line-name = "modem-power";
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&config 0x0>;
+ mtd-mac-address-increment = <2>;
+};
# from begin of the firmware file) with 16 bytes stored just before
# 0xdeadc0de marker. Values are only compared, MD5 sum is not verified.
let \
- offs="$$(stat -c%s $@) - 20"; \
+ offs="$$(stat -c%s $@) - $(1)"; \
dd if=$@ bs=1 count=16 skip=76 |\
dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc
endef
+define Build/teltonika-v1-header
+ $(STAGING_DIR_HOST)/bin/mktplinkfw \
+ -c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
+ -E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+ -m $(TPLINK_HEADER_VERSION) -N "$(VERSION_DIST)" -V "RUT2xx " \
+ -k $@ -o $@.new $(1)
+ @mv $@.new $@
+endef
+
define Build/wrgg-pad-rootfs
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
endef
endef
TARGET_DEVICES += telco_t1
+define Device/teltonika_rut230-v1
+ SOC := ar9331
+ DEVICE_VENDOR := Teltonika
+ DEVICE_MODEL := RUT230
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-acm kmod-usb-net-qmi-wwan \
+ uqmi -uboot-envtools
+ IMAGE_SIZE := 15552k
+ TPLINK_HWID := 0x32200002
+ TPLINK_HWREV := 0x1
+ TPLINK_HEADER_VERSION := 1
+ KERNEL := kernel-bin | append-dtb | lzma | teltonika-v1-header
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
+ pad-rootfs | pad-extra 64 | teltonika-fw-fake-checksum 54 | check-size
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata |\
+ check-size
+endef
+TARGET_DEVICES += teltonika_rut230-v1
+
define Device/teltonika_rut955
SOC := ar9344
DEVICE_VENDOR := Teltonika
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
- pad-rootfs | teltonika-fw-fake-checksum | append-string master |\
+ pad-rootfs | teltonika-fw-fake-checksum 20 | append-string master |\
append-md5sum-bin | check-size
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
append-rootfs | pad-rootfs | append-metadata |\
projects / openwrt / staging / hauke.git / commitdiff