mpc85xx: add properties normally added by U-Boot

This adds properties to PCIe as well as ethernet nodes which are
normally added by the Extreme Networks U-Boot.

Signed-off-by: David Bauer <mail@david-bauer.net>

diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts
index 46561363e93ed099e535bd2a27eadcdda0e826d9..c07167b40fedab0a813a267dfaf57f5a56b8bb6c 100644 (file)
--- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts
@@ -199,6 +199,13 @@
                ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
                          0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
                reg = <0 0xffe09000 0 0x1000>;
+
+               /* Filled by U-Boot */
+               bus-range = <0x00 0x01>;
+               dma-ranges = <0x2000000 0x00 0xfff00000 0x00 0xffe00000
+                             0x00 0x100000 0x42000000 0x00 0x00 0x00
+                             0x00 0x00 0x10000000>;
+
                pcie@0 {
                        ranges = <0x2000000 0x0 0xa0000000
                                  0x2000000 0x0 0xa0000000
@@ -214,6 +221,13 @@
                reg = <0 0xffe0a000 0 0x1000>;
                ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
                          0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+
+               /* Filled by U-Boot */
+               bus-range = <0x00 0x01>;
+               dma-ranges = <0x2000000 0x00 0xfff00000 0x00
+                             0xffe00000 0x00 0x100000 0x42000000
+                             0x00 0x00 0x00 0x00 0x00 0x10000000>;
+
                pcie@0 {
                        ranges = <0x2000000 0x0 0x80000000
                                  0x2000000 0x0 0x80000000
@@ -311,6 +325,18 @@
        };
 };
 
+&enet0 {
+       rx-stash-idx = <0x00>;
+       rx-stash-len = <0x60>;
+       bd-stash;
+};
+
+&enet2 {
+       rx-stash-idx = <0x00>;
+       rx-stash-len = <0x60>;
+       bd-stash;
+};
+
 /*
  * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses
  * aliases to determine PCI domain numbers, drop aliases so as not to