lpc32xx: devkit3250: update board configuration file

The change updates DevKit3250 board powerd by NXP LPC3250 SoC:
* due to increased resulting U-boot image size give more space to
  store loaded and relocated versions,
* add DMA support, which is used by NAND SLC driver,
* add NXP OHCI and PHY drivers to the image,
* add USB, JFFS and FAT commands.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index d89e661b6b5a131f513e502eec67cda602d0a2b6..99d91486113f4495595509ec77279725788215e7 100644 (file)
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -33,7 +33,7 @@
 #define CONFIG_SYS_MALLOC_LEN          SZ_1M
 #define CONFIG_SYS_SDRAM_BASE          EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE          SZ_64M
-#define CONFIG_SYS_TEXT_BASE           0x83FA0000
+#define CONFIG_SYS_TEXT_BASE           0x83F00000
 #define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE + SZ_32K)
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - SZ_1M)
 
@@ -48,6 +48,13 @@
 #define CONFIG_SYS_LPC32XX_UART                5   /* UART5 */
 #define CONFIG_BAUDRATE                        115200
 
+/*
+ * DMA
+ */
+#if !defined(CONFIG_SPL_BUILD)
+#define CONFIG_DMA_LPC32XX
+#endif
+
 /*
  * I2C
  */
@@ -114,8 +121,18 @@
 #define CONFIG_SYS_NAND_PAGE_SIZE              NAND_LARGE_BLOCK_PAGE_SIZE
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NAND
 
+/*
+ * USB
+ */
+#define CONFIG_USB_OHCI_LPC32XX
+#define CONFIG_USB_ISP1301_I2C_ADDR            0x2d
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
+
 /*
  * U-Boot General Configurations
  */