gigaset: CAPI module readability improvements

Replace the "ignoring Additional Info" warning message by better
readable ones citing the specific subparameters being ignored.
Make parts of the code more readable by using a local cmsg
pointer variable.

Impact: readability improvement
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index c276a925b36f6e77c2fa74a74741838e2745aded..ac0a2da1eef6160a6e66d3ad67446607e3850b30 100644 (file)
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -168,14 +168,6 @@ static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param,
                         msgname, paramname);
 }
 
-static inline void ignore_cmstruct_param(struct cardstate *cs, _cmstruct param,
-                                      char *msgname, char *paramname)
-{
-       if (param != CAPI_DEFAULT)
-               dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n",
-                        msgname, paramname);
-}
-
 /*
  * check for legal hex digit
  */
@@ -1062,6 +1054,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
                            struct sk_buff *skb)
 {
        struct cardstate *cs = iif->ctr.driverdata;
+       _cmsg *cmsg = &iif->acmsg;
        struct sk_buff *cskb;
        u8 *pparam;
        unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN;
@@ -1069,14 +1062,14 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
        static u8 confparam[10];        /* max. 9 octets + length byte */
 
        /* decode message */
-       capi_message2cmsg(&iif->acmsg, skb->data);
-       dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+       capi_message2cmsg(cmsg, skb->data);
+       dump_cmsg(DEBUG_CMD, __func__, cmsg);
 
        /*
         * Facility Request Parameter is not decoded by capi_message2cmsg()
         * encoding depends on Facility Selector
         */
-       switch (iif->acmsg.FacilitySelector) {
+       switch (cmsg->FacilitySelector) {
        case CAPI_FACILITY_DTMF:        /* ToDo */
                info = CapiFacilityNotSupported;
                confparam[0] = 2;       /* length */
@@ -1093,7 +1086,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
 
        case CAPI_FACILITY_SUPPSVC:
                /* decode Function parameter */
-               pparam = iif->acmsg.FacilityRequestParameter;
+               pparam = cmsg->FacilityRequestParameter;
                if (pparam == NULL || *pparam < 2) {
                        dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ",
                                   "Facility Request Parameter");
@@ -1141,18 +1134,18 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
        }
 
        /* send FACILITY_CONF with given Info and confirmation parameter */
-       capi_cmsg_answer(&iif->acmsg);
-       iif->acmsg.Info = info;
-       iif->acmsg.FacilityConfirmationParameter = confparam;
+       capi_cmsg_answer(cmsg);
+       cmsg->Info = info;
+       cmsg->FacilityConfirmationParameter = confparam;
        msgsize += confparam[0];        /* length */
        cskb = alloc_skb(msgsize, GFP_ATOMIC);
        if (!cskb) {
                dev_err(cs->dev, "%s: out of memory\n", __func__);
                return;
        }
-       capi_cmsg2message(&iif->acmsg, __skb_put(cskb, msgsize));
-       dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
-               capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
+       capi_cmsg2message(cmsg, __skb_put(cskb, msgsize));
+       dump_cmsg(DEBUG_CMD, __func__, cmsg);
+       capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
 }
 
 
@@ -1207,8 +1200,8 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
        u16 info;
 
        /* decode message */
-       capi_message2cmsg(&iif->acmsg, skb->data);
-       dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+       capi_message2cmsg(cmsg, skb->data);
+       dump_cmsg(DEBUG_CMD, __func__, cmsg);
 
        /* get free B channel & construct PLCI */
        bcs = gigaset_get_free_channel(cs);
@@ -1411,8 +1404,16 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
                                        "CONNECT_REQ", "Calling pty subaddr");
        ignore_cstruct_param(cs, cmsg->LLC,
                                        "CONNECT_REQ", "LLC");
-       ignore_cmstruct_param(cs, cmsg->AdditionalInfo,
-                                       "CONNECT_REQ", "Additional Info");
+       if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+               ignore_cstruct_param(cs, cmsg->BChannelinformation,
+                                       "CONNECT_REQ", "B Channel Information");
+               ignore_cstruct_param(cs, cmsg->Keypadfacility,
+                                       "CONNECT_REQ", "Keypad Facility");
+               ignore_cstruct_param(cs, cmsg->Useruserdata,
+                                       "CONNECT_REQ", "User-User Data");
+               ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+                                       "CONNECT_REQ", "Facility Data Array");
+       }
 
        /* encode parameter: B channel to use */
        commands[AT_ISO] = kmalloc(9, GFP_KERNEL);
@@ -1458,8 +1459,8 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
        int channel;
 
        /* decode message */
-       capi_message2cmsg(&iif->acmsg, skb->data);
-       dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+       capi_message2cmsg(cmsg, skb->data);
+       dump_cmsg(DEBUG_CMD, __func__, cmsg);
        dev_kfree_skb(skb);
 
        /* extract and check channel number from PLCI */
@@ -1524,8 +1525,16 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
                                        "CONNECT_RESP", "Connected Subaddress");
                ignore_cstruct_param(cs, cmsg->LLC,
                                        "CONNECT_RESP", "LLC");
-               ignore_cmstruct_param(cs, cmsg->AdditionalInfo,
-                                       "CONNECT_RESP", "Additional Info");
+               if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+                       ignore_cstruct_param(cs, cmsg->BChannelinformation,
+                                       "CONNECT_RESP", "BChannel Information");
+                       ignore_cstruct_param(cs, cmsg->Keypadfacility,
+                                       "CONNECT_RESP", "Keypad Facility");
+                       ignore_cstruct_param(cs, cmsg->Useruserdata,
+                                       "CONNECT_RESP", "User-User Data");
+                       ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+                                       "CONNECT_RESP", "Facility Data Array");
+               }
 
                /* Accept call */
                if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
@@ -1587,17 +1596,18 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
                              struct sk_buff *skb)
 {
        struct cardstate *cs = iif->ctr.driverdata;
+       _cmsg *cmsg = &iif->acmsg;
        int channel;
 
        /* decode message */
-       capi_message2cmsg(&iif->acmsg, skb->data);
-       dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+       capi_message2cmsg(cmsg, skb->data);
+       dump_cmsg(DEBUG_CMD, __func__, cmsg);
 
        /* extract and check channel number from PLCI */
-       channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff;
+       channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
        if (!channel || channel > cs->channels) {
                dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-                          "CONNECT_B3_REQ", "PLCI", iif->acmsg.adr.adrPLCI);
+                          "CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI);
                send_conf(iif, ap, skb, CapiIllContrPlciNcci);
                return;
        }
@@ -1606,14 +1616,12 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
        ap->connected = APCONN_ACTIVE;
 
        /* build NCCI: always 1 (one B3 connection only) */
-       iif->acmsg.adr.adrNCCI |= 1 << 16;
+       cmsg->adr.adrNCCI |= 1 << 16;
 
        /* NCPI parameter: not applicable for B3 Transparent */
-       ignore_cstruct_param(cs, iif->acmsg.NCPI,
-                               "CONNECT_B3_REQ", "NCPI");
-       send_conf(iif, ap, skb,
-                 (iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ?
-                       CapiNcpiNotSupportedByProtocol : CapiSuccess);
+       ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI");
+       send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
+                               CapiNcpiNotSupportedByProtocol : CapiSuccess);
 }
 
 /*
@@ -1628,27 +1636,28 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
                               struct sk_buff *skb)
 {
        struct cardstate *cs = iif->ctr.driverdata;
-       struct bc_state *bcs = NULL;
+       _cmsg *cmsg = &iif->acmsg;
+       struct bc_state *bcs;
        int channel;
        unsigned int msgsize;
        u8 command;
 
        /* decode message */
-       capi_message2cmsg(&iif->acmsg, skb->data);
-       dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+       capi_message2cmsg(cmsg, skb->data);
+       dump_cmsg(DEBUG_CMD, __func__, cmsg);
 
        /* extract and check channel number and NCCI */
-       channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff;
+       channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
        if (!channel || channel > cs->channels ||
-           ((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) {
+           ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
                dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-                          "CONNECT_B3_RESP", "NCCI", iif->acmsg.adr.adrNCCI);
+                          "CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI);
                dev_kfree_skb(skb);
                return;
        }
        bcs = &cs->bcs[channel-1];
 
-       if (iif->acmsg.Reject) {
+       if (cmsg->Reject) {
                /* Reject: clear B3 connect received flag */
                ap->connected = APCONN_SETUP;
 
@@ -1673,11 +1682,11 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
                command = CAPI_CONNECT_B3_ACTIVE;
                msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
        }
-       capi_cmsg_header(&iif->acmsg, ap->id, command, CAPI_IND,
-                        ap->nextMessageNumber++, iif->acmsg.adr.adrNCCI);
+       capi_cmsg_header(cmsg, ap->id, command, CAPI_IND,
+                        ap->nextMessageNumber++, cmsg->adr.adrNCCI);
        __skb_trim(skb, msgsize);
-       capi_cmsg2message(&iif->acmsg, skb->data);
-       dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+       capi_cmsg2message(cmsg, skb->data);
+       dump_cmsg(DEBUG_CMD, __func__, cmsg);
        capi_ctr_handle_message(&iif->ctr, ap->id, skb);
 }
 
@@ -1691,28 +1700,37 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
                              struct sk_buff *skb)
 {
        struct cardstate *cs = iif->ctr.driverdata;
+       _cmsg *cmsg = &iif->acmsg;
        struct bc_state *bcs;
        _cmsg *b3cmsg;
        struct sk_buff *b3skb;
        int channel;
 
        /* decode message */
-       capi_message2cmsg(&iif->acmsg, skb->data);
-       dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+       capi_message2cmsg(cmsg, skb->data);
+       dump_cmsg(DEBUG_CMD, __func__, cmsg);
 
        /* extract and check channel number from PLCI */
-       channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff;
+       channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
        if (!channel || channel > cs->channels) {
                dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-                          "DISCONNECT_REQ", "PLCI", iif->acmsg.adr.adrPLCI);
+                          "DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI);
                send_conf(iif, ap, skb, CapiIllContrPlciNcci);
                return;
        }
        bcs = cs->bcs + channel - 1;
 
        /* ToDo: process parameter: Additional info */
-       ignore_cmstruct_param(cs, iif->acmsg.AdditionalInfo,
-                             "DISCONNECT_REQ", "Additional Info");
+       if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+               ignore_cstruct_param(cs, cmsg->BChannelinformation,
+                                    "DISCONNECT_REQ", "B Channel Information");
+               ignore_cstruct_param(cs, cmsg->Keypadfacility,
+                                    "DISCONNECT_REQ", "Keypad Facility");
+               ignore_cstruct_param(cs, cmsg->Useruserdata,
+                                    "DISCONNECT_REQ", "User-User Data");
+               ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+                                    "DISCONNECT_REQ", "Facility Data Array");
+       }
 
        /* skip if DISCONNECT_IND already sent */
        if (!ap->connected)
@@ -1733,7 +1751,7 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
                }
                capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
                                 ap->nextMessageNumber++,
-                                iif->acmsg.adr.adrPLCI | (1 << 16));
+                                cmsg->adr.adrPLCI | (1 << 16));
                b3cmsg->Reason_B3 = CapiProtocolErrorLayer1;
                b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL);
                if (b3skb == NULL) {
@@ -1769,18 +1787,19 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
                                 struct sk_buff *skb)
 {
        struct cardstate *cs = iif->ctr.driverdata;
+       _cmsg *cmsg = &iif->acmsg;
        int channel;
 
        /* decode message */
-       capi_message2cmsg(&iif->acmsg, skb->data);
-       dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+       capi_message2cmsg(cmsg, skb->data);
+       dump_cmsg(DEBUG_CMD, __func__, cmsg);
 
        /* extract and check channel number and NCCI */
-       channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff;
+       channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
        if (!channel || channel > cs->channels ||
-           ((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) {
+           ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
                dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-                          "DISCONNECT_B3_REQ", "NCCI", iif->acmsg.adr.adrNCCI);
+                          "DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI);
                send_conf(iif, ap, skb, CapiIllContrPlciNcci);
                return;
        }
@@ -1803,11 +1822,10 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
        gigaset_schedule_event(cs);
 
        /* NCPI parameter: not applicable for B3 Transparent */
-       ignore_cstruct_param(cs, iif->acmsg.NCPI,
+       ignore_cstruct_param(cs, cmsg->NCPI,
                                "DISCONNECT_B3_REQ", "NCPI");
-       send_conf(iif, ap, skb,
-                 (iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ?
-                       CapiNcpiNotSupportedByProtocol : CapiSuccess);
+       send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
+                               CapiNcpiNotSupportedByProtocol : CapiSuccess);
 }
 
 /*