mac80211: move 620-rt2x00_soc_led_support.patch to the correct place

* fixes [26463]

SVN-Revision: 26467

diff --git a/mac80211/patches/620-rt2x00_soc_led_support.patch b/mac80211/patches/620-rt2x00_soc_led_support.patch
deleted file mode 100644 (file)
index 2b87b34..0000000
--- a/mac80211/patches/620-rt2x00_soc_led_support.patch
+++ /dev/null
@@ -1,75 +0,0 @@
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
-@@ -935,6 +935,7 @@
- static void rt2800_brightness_set(struct led_classdev *led_cdev,
-                                 enum led_brightness brightness)
- {
-+      u32 reg;
-       struct rt2x00_led *led =
-           container_of(led_cdev, struct rt2x00_led, led_dev);
-       unsigned int enabled = brightness != LED_OFF;
-@@ -947,24 +948,46 @@
-               rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-                                  EEPROM_FREQ_LED_MODE);
-
--      if (led->type == LED_TYPE_RADIO) {
--              rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
--                                    enabled ? 0x20 : 0);
--      } else if (led->type == LED_TYPE_ASSOC) {
--              rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
--                                    enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
--      } else if (led->type == LED_TYPE_QUALITY) {
--              /*
--               * The brightness is divided into 6 levels (0 - 5),
--               * The specs tell us the following levels:
--               *      0, 1 ,3, 7, 15, 31
--               * to determine the level in a simple way we can simply
--               * work with bitshifting:
--               *      (1 << level) - 1
--               */
--              rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
--                                    (1 << brightness / (LED_FULL / 6)) - 1,
--                                    polarity);
-+      /* Check for SoC (SOC devices don't support MCU requests) */
-+      if (rt2x00_is_soc(led->rt2x00dev)) {
-+              rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
-+
-+              /* Set LED Polarity */
-+              rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, polarity);
-+
-+              /* Set LED Mode */
-+              if (led->type == LED_TYPE_RADIO) {
-+                      rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE,
-+                                         enabled ? 3 : 0);
-+              } else if (led->type == LED_TYPE_ASSOC) {
-+                      rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE,
-+                                         enabled ? 3 : 0);
-+              } else if (led->type == LED_TYPE_QUALITY) {
-+                      rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE,
-+                                         enabled ? 3 : 0);
-+              }
-+              rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
-+      }
-+      else {
-+              if (led->type == LED_TYPE_RADIO) {
-+                      rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-+                                      enabled ? 0x20 : 0);
-+              } else if (led->type == LED_TYPE_ASSOC) {
-+                      rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-+                                      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
-+              } else if (led->type == LED_TYPE_QUALITY) {
-+                      /*
-+                      * The brightness is divided into 6 levels (0 - 5),
-+                      * The specs tell us the following levels:
-+                      *       0, 1 ,3, 7, 15, 31
-+                      * to determine the level in a simple way we can simply
-+                      * work with bitshifting:
-+                      *       (1 << level) - 1
-+                      */
-+                      rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
-+                                      (1 << brightness / (LED_FULL / 6)) - 1,
-+                                      polarity);
-+              }
-       }
- }
-

diff --git a/package/mac80211/patches/620-rt2x00_soc_led_support.patch b/package/mac80211/patches/620-rt2x00_soc_led_support.patch
new file mode 100644 (file)
index 0000000..2b87b34
--- /dev/null
+++ b/package/mac80211/patches/620-rt2x00_soc_led_support.patch
@@ -0,0 +1,75 @@
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -935,6 +935,7 @@
+ static void rt2800_brightness_set(struct led_classdev *led_cdev,
+                                 enum led_brightness brightness)
+ {
++      u32 reg;
+       struct rt2x00_led *led =
+           container_of(led_cdev, struct rt2x00_led, led_dev);
+       unsigned int enabled = brightness != LED_OFF;
+@@ -947,24 +948,46 @@
+               rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+                                  EEPROM_FREQ_LED_MODE);
+
+-      if (led->type == LED_TYPE_RADIO) {
+-              rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+-                                    enabled ? 0x20 : 0);
+-      } else if (led->type == LED_TYPE_ASSOC) {
+-              rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+-                                    enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+-      } else if (led->type == LED_TYPE_QUALITY) {
+-              /*
+-               * The brightness is divided into 6 levels (0 - 5),
+-               * The specs tell us the following levels:
+-               *      0, 1 ,3, 7, 15, 31
+-               * to determine the level in a simple way we can simply
+-               * work with bitshifting:
+-               *      (1 << level) - 1
+-               */
+-              rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+-                                    (1 << brightness / (LED_FULL / 6)) - 1,
+-                                    polarity);
++      /* Check for SoC (SOC devices don't support MCU requests) */
++      if (rt2x00_is_soc(led->rt2x00dev)) {
++              rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
++
++              /* Set LED Polarity */
++              rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, polarity);
++
++              /* Set LED Mode */
++              if (led->type == LED_TYPE_RADIO) {
++                      rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE,
++                                         enabled ? 3 : 0);
++              } else if (led->type == LED_TYPE_ASSOC) {
++                      rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE,
++                                         enabled ? 3 : 0);
++              } else if (led->type == LED_TYPE_QUALITY) {
++                      rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE,
++                                         enabled ? 3 : 0);
++              }
++              rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
++      }
++      else {
++              if (led->type == LED_TYPE_RADIO) {
++                      rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
++                                      enabled ? 0x20 : 0);
++              } else if (led->type == LED_TYPE_ASSOC) {
++                      rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
++                                      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
++              } else if (led->type == LED_TYPE_QUALITY) {
++                      /*
++                      * The brightness is divided into 6 levels (0 - 5),
++                      * The specs tell us the following levels:
++                      *       0, 1 ,3, 7, 15, 31
++                      * to determine the level in a simple way we can simply
++                      * work with bitshifting:
++                      *       (1 << level) - 1
++                      */
++                      rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
++                                      (1 << brightness / (LED_FULL / 6)) - 1,
++                                      polarity);
++              }
+       }
+ }
+