--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:26:51 +0100
+Subject: [PATCH] brcmfmac: Limit memory allocs to <64K
+
+Some systems have problems with allocating memory allocation larger
+then 64K. Often on unload/load or suspend/resume a failure is
+reported: Could not allocate wiphy device. This patch makes the
+escan intermediate storage buf dynamically allocated, and smaller
+than 64K.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -1125,7 +1125,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy
+
+ /* Arm scan timeout timer */
+ mod_timer(&cfg->escan_timeout, jiffies +
+- WL_ESCAN_TIMER_INTERVAL_MS * HZ / 1000);
++ BRCMF_ESCAN_TIMER_INTERVAL_MS * HZ / 1000);
+
+ return 0;
+
+@@ -3020,7 +3020,7 @@ brcmf_cfg80211_escan_handler(struct brcm
+
+ list = (struct brcmf_scan_results *)
+ cfg->escan_info.escan_buf;
+- if (bi_length > WL_ESCAN_BUF_SIZE - list->buflen) {
++ if (bi_length > BRCMF_ESCAN_BUF_SIZE - list->buflen) {
+ brcmf_err("Buffer is too small: ignoring\n");
+ goto exit;
+ }
+@@ -3033,8 +3033,8 @@ brcmf_cfg80211_escan_handler(struct brcm
+ bss_info_le))
+ goto exit;
+ }
+- memcpy(&(cfg->escan_info.escan_buf[list->buflen]),
+- bss_info_le, bi_length);
++ memcpy(&cfg->escan_info.escan_buf[list->buflen], bss_info_le,
++ bi_length);
+ list->version = le32_to_cpu(bss_info_le->version);
+ list->buflen += bi_length;
+ list->count++;
+@@ -5402,14 +5402,14 @@ static void brcmf_deinit_priv_mem(struct
+ {
+ kfree(cfg->conf);
+ cfg->conf = NULL;
+- kfree(cfg->escan_ioctl_buf);
+- cfg->escan_ioctl_buf = NULL;
+ kfree(cfg->extra_buf);
+ cfg->extra_buf = NULL;
+ kfree(cfg->wowl.nd);
+ cfg->wowl.nd = NULL;
+ kfree(cfg->wowl.nd_info);
+ cfg->wowl.nd_info = NULL;
++ kfree(cfg->escan_info.escan_buf);
++ cfg->escan_info.escan_buf = NULL;
+ }
+
+ static s32 brcmf_init_priv_mem(struct brcmf_cfg80211_info *cfg)
+@@ -5417,9 +5417,6 @@ static s32 brcmf_init_priv_mem(struct br
+ cfg->conf = kzalloc(sizeof(*cfg->conf), GFP_KERNEL);
+ if (!cfg->conf)
+ goto init_priv_mem_out;
+- cfg->escan_ioctl_buf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
+- if (!cfg->escan_ioctl_buf)
+- goto init_priv_mem_out;
+ cfg->extra_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL);
+ if (!cfg->extra_buf)
+ goto init_priv_mem_out;
+@@ -5431,6 +5428,9 @@ static s32 brcmf_init_priv_mem(struct br
+ GFP_KERNEL);
+ if (!cfg->wowl.nd_info)
+ goto init_priv_mem_out;
++ cfg->escan_info.escan_buf = kzalloc(BRCMF_ESCAN_BUF_SIZE, GFP_KERNEL);
++ if (!cfg->escan_info.escan_buf)
++ goto init_priv_mem_out;
+
+ return 0;
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+@@ -28,8 +28,11 @@
+ #define WL_ROAM_TRIGGER_LEVEL -75
+ #define WL_ROAM_DELTA 20
+
+-#define WL_ESCAN_BUF_SIZE (1024 * 64)
+-#define WL_ESCAN_TIMER_INTERVAL_MS 10000 /* E-Scan timeout */
++/* Keep BRCMF_ESCAN_BUF_SIZE below 64K (65536). Allocing over 64K can be
++ * problematic on some systems and should be avoided.
++ */
++#define BRCMF_ESCAN_BUF_SIZE 65000
++#define BRCMF_ESCAN_TIMER_INTERVAL_MS 10000 /* E-Scan timeout */
+
+ #define WL_ESCAN_ACTION_START 1
+ #define WL_ESCAN_ACTION_CONTINUE 2
+@@ -205,7 +208,7 @@ enum wl_escan_state {
+
+ struct escan_info {
+ u32 escan_state;
+- u8 escan_buf[WL_ESCAN_BUF_SIZE];
++ u8 *escan_buf;
+ struct wiphy *wiphy;
+ struct brcmf_if *ifp;
+ s32 (*run)(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp,
+@@ -278,7 +281,6 @@ struct brcmf_cfg80211_wowl {
+ * @escan_info: escan information.
+ * @escan_timeout: Timer for catch scan timeout.
+ * @escan_timeout_work: scan timeout worker.
+- * @escan_ioctl_buf: dongle command buffer for escan commands.
+ * @vif_list: linked list of vif instances.
+ * @vif_cnt: number of vif instances.
+ * @vif_event: vif event signalling.
+@@ -309,7 +311,6 @@ struct brcmf_cfg80211_info {
+ struct escan_info escan_info;
+ struct timer_list escan_timeout;
+ struct work_struct escan_timeout_work;
+- u8 *escan_ioctl_buf;
+ struct list_head vif_list;
+ struct brcmf_cfg80211_vif_event vif_event;
+ struct completion vif_disabled;
--- /dev/null
+From: Franky Lin <frankyl@broadcom.com>
+Date: Wed, 17 Feb 2016 11:26:52 +0100
+Subject: [PATCH] brcmfmac: check for wowl support before enumerating feature
+ flag
+
+In some cases wiphy->wowlan could be NULL if firmware doesn't have the
+support. Driver should check for support before walking down the feature
+flags.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Franky Lin <frankyl@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -6594,7 +6594,8 @@ struct brcmf_cfg80211_info *brcmf_cfg802
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SCAN_RANDOM_MAC)) {
+ wiphy->features |= NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR;
+ #ifdef CONFIG_PM
+- if (wiphy->wowlan->flags & WIPHY_WOWLAN_NET_DETECT)
++ if (wiphy->wowlan &&
++ wiphy->wowlan->flags & WIPHY_WOWLAN_NET_DETECT)
+ wiphy->features |= NL80211_FEATURE_ND_RANDOM_MAC_ADDR;
+ #endif
+ }
--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:26:53 +0100
+Subject: [PATCH] brcmfmac: Configure country code using device specific
+ settings
+
+Country code configuration in a device is a device specific
+operation. For this the country code as specified by reg notifier
+(iso3166 alpha2) needs to be translated to a device specific
+country locale and revision number. This patch adds this
+translation and puts a placeholder in the device specific settings
+where the translation table can be stored. Additional patches will
+be needed to read these tables from for example device platform
+data.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -6405,28 +6405,85 @@ int brcmf_cfg80211_wait_vif_event(struct
+ vif_event_equals(event, action), timeout);
+ }
+
++static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
++ struct brcmf_fil_country_le *ccreq)
++{
++ struct cc_translate *country_codes;
++ struct cc_entry *cc;
++ s32 found_index;
++ int i;
++
++ country_codes = drvr->settings->country_codes;
++ if (!country_codes) {
++ brcmf_dbg(TRACE, "No country codes configured for device\n");
++ return -EINVAL;
++ }
++
++ if ((alpha2[0] == ccreq->country_abbrev[0]) &&
++ (alpha2[1] == ccreq->country_abbrev[1])) {
++ brcmf_dbg(TRACE, "Country code already set\n");
++ return -EAGAIN;
++ }
++
++ found_index = -1;
++ for (i = 0; i < country_codes->table_size; i++) {
++ cc = &country_codes->table[i];
++ if ((cc->iso3166[0] == '\0') && (found_index == -1))
++ found_index = i;
++ if ((cc->iso3166[0] == alpha2[0]) &&
++ (cc->iso3166[1] == alpha2[1])) {
++ found_index = i;
++ break;
++ }
++ }
++ if (found_index == -1) {
++ brcmf_dbg(TRACE, "No country code match found\n");
++ return -EINVAL;
++ }
++ memset(ccreq, 0, sizeof(*ccreq));
++ ccreq->rev = cpu_to_le32(country_codes->table[found_index].rev);
++ memcpy(ccreq->ccode, country_codes->table[found_index].cc,
++ BRCMF_COUNTRY_BUF_SZ);
++ ccreq->country_abbrev[0] = alpha2[0];
++ ccreq->country_abbrev[1] = alpha2[1];
++ ccreq->country_abbrev[2] = 0;
++
++ return 0;
++}
++
+ static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy,
+ struct regulatory_request *req)
+ {
+ struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
+ struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
+ struct brcmf_fil_country_le ccreq;
++ s32 err;
+ int i;
+
+- brcmf_dbg(TRACE, "enter: initiator=%d, alpha=%c%c\n", req->initiator,
+- req->alpha2[0], req->alpha2[1]);
+-
+ /* ignore non-ISO3166 country codes */
+ for (i = 0; i < sizeof(req->alpha2); i++)
+ if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') {
+- brcmf_err("not a ISO3166 code\n");
++ brcmf_err("not a ISO3166 code (0x%02x 0x%02x)\n",
++ req->alpha2[0], req->alpha2[1]);
+ return;
+ }
+- memset(&ccreq, 0, sizeof(ccreq));
+- ccreq.rev = cpu_to_le32(-1);
+- memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2));
+- if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) {
+- brcmf_err("firmware rejected country setting\n");
++
++ brcmf_dbg(TRACE, "Enter: initiator=%d, alpha=%c%c\n", req->initiator,
++ req->alpha2[0], req->alpha2[1]);
++
++ err = brcmf_fil_iovar_data_get(ifp, "country", &ccreq, sizeof(ccreq));
++ if (err) {
++ brcmf_err("Country code iovar returned err = %d\n", err);
++ return;
++ }
++
++ err = brcmf_translate_country_code(ifp->drvr, req->alpha2, &ccreq);
++ if (err)
++ return;
++
++ err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
++ if (err) {
++ brcmf_err("Firmware rejected country setting\n");
+ return;
+ }
+ brcmf_setup_wiphybands(wiphy);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -230,10 +230,8 @@ void brcmf_mp_attach(void)
+ int brcmf_mp_device_attach(struct brcmf_pub *drvr)
+ {
+ drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC);
+- if (!drvr->settings) {
+- brcmf_err("Failed to alloca storage space for settings\n");
++ if (!drvr->settings)
+ return -ENOMEM;
+- }
+
+ drvr->settings->sdiod_txglomsz = brcmf_sdiod_txglomsz;
+ drvr->settings->p2p_enable = !!brcmf_p2p_enable;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+@@ -15,6 +15,8 @@
+ #ifndef BRCMFMAC_COMMON_H
+ #define BRCMFMAC_COMMON_H
+
++#include "fwil_types.h"
++
+ extern const u8 ALLFFMAC[ETH_ALEN];
+
+ #define BRCMF_FW_ALTPATH_LEN 256
+@@ -39,6 +41,33 @@ struct brcmf_mp_global_t {
+ extern struct brcmf_mp_global_t brcmf_mp_global;
+
+ /**
++ * struct cc_entry - Struct for translating user space country code (iso3166) to
++ * firmware country code and revision.
++ *
++ * @iso3166: iso3166 alpha 2 country code string.
++ * @cc: firmware country code string.
++ * @rev: firmware country code revision.
++ */
++struct cc_entry {
++ char iso3166[BRCMF_COUNTRY_BUF_SZ];
++ char cc[BRCMF_COUNTRY_BUF_SZ];
++ s32 rev;
++};
++
++/**
++ * struct cc_translate - Struct for translating country codes as set by user
++ * space to a country code and rev which can be used by
++ * firmware.
++ *
++ * @table_size: number of entries in table (> 0)
++ * @table: dynamic array of 1 or more elements with translation information.
++ */
++struct cc_translate {
++ int table_size;
++ struct cc_entry table[0];
++};
++
++/**
+ * struct brcmf_mp_device - Device module paramaters.
+ *
+ * @sdiod_txglomsz: SDIO txglom size.
+@@ -47,6 +76,7 @@ extern struct brcmf_mp_global_t brcmf_mp
+ * @feature_disable: Feature_disable bitmask.
+ * @fcmode: FWS flow control.
+ * @roamoff: Firmware roaming off?
++ * @country_codes: If available, pointer to struct for translating country codes
+ */
+ struct brcmf_mp_device {
+ int sdiod_txglomsz;
+@@ -56,6 +86,7 @@ struct brcmf_mp_device {
+ int fcmode;
+ bool roamoff;
+ bool ignore_probe_fail;
++ struct cc_translate *country_codes;
+ };
+
+ void brcmf_mp_attach(void);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+@@ -134,6 +134,8 @@
+ #define BRCMF_PFN_MAC_OUI_ONLY BIT(0)
+ #define BRCMF_PFN_SET_MAC_UNASSOC BIT(1)
+
++#define BRCMF_MCSSET_LEN 16
++
+ /* join preference types for join_pref iovar */
+ enum brcmf_join_pref_types {
+ BRCMF_JOIN_PREF_RSSI = 1,
+@@ -279,7 +281,7 @@ struct brcmf_bss_info_le {
+ __le32 reserved32[1]; /* Reserved for expansion of BSS properties */
+ u8 flags; /* flags */
+ u8 reserved[3]; /* Reserved for expansion of BSS properties */
+- u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
++ u8 basic_mcs[BRCMF_MCSSET_LEN]; /* 802.11N BSS required MCS set */
+
+ __le16 ie_offset; /* offset at which IEs start, from beginning */
+ __le32 ie_length; /* byte length of Information Elements */
--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:26:54 +0100
+Subject: [PATCH] brcmfmac: Add length checks on firmware events
+
+Add additional length checks on firmware events to create more
+robust code.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Reviewed-by: Lei Zhang <leizh@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3092,6 +3092,11 @@ brcmf_notify_sched_scan_results(struct b
+
+ brcmf_dbg(SCAN, "Enter\n");
+
++ if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) {
++ brcmf_dbg(SCAN, "Event data to small. Ignore\n");
++ return 0;
++ }
++
+ if (e->event_code == BRCMF_E_PFN_NET_LOST) {
+ brcmf_dbg(SCAN, "PFN NET LOST event. Do Nothing\n");
+ return 0;
+@@ -3415,6 +3420,11 @@ brcmf_wowl_nd_results(struct brcmf_if *i
+
+ brcmf_dbg(SCAN, "Enter\n");
+
++ if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) {
++ brcmf_dbg(SCAN, "Event data to small. Ignore\n");
++ return 0;
++ }
++
+ pfn_result = (struct brcmf_pno_scanresults_le *)data;
+
+ if (e->event_code == BRCMF_E_PFN_NET_LOST) {
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+@@ -26,50 +26,6 @@
+ #include "fwil.h"
+
+ /**
+- * struct brcm_ethhdr - broadcom specific ether header.
+- *
+- * @subtype: subtype for this packet.
+- * @length: TODO: length of appended data.
+- * @version: version indication.
+- * @oui: OUI of this packet.
+- * @usr_subtype: subtype for this OUI.
+- */
+-struct brcm_ethhdr {
+- __be16 subtype;
+- __be16 length;
+- u8 version;
+- u8 oui[3];
+- __be16 usr_subtype;
+-} __packed;
+-
+-struct brcmf_event_msg_be {
+- __be16 version;
+- __be16 flags;
+- __be32 event_type;
+- __be32 status;
+- __be32 reason;
+- __be32 auth_type;
+- __be32 datalen;
+- u8 addr[ETH_ALEN];
+- char ifname[IFNAMSIZ];
+- u8 ifidx;
+- u8 bsscfgidx;
+-} __packed;
+-
+-/**
+- * struct brcmf_event - contents of broadcom event packet.
+- *
+- * @eth: standard ether header.
+- * @hdr: broadcom specific ether header.
+- * @msg: common part of the actual event message.
+- */
+-struct brcmf_event {
+- struct ethhdr eth;
+- struct brcm_ethhdr hdr;
+- struct brcmf_event_msg_be msg;
+-} __packed;
+-
+-/**
+ * struct brcmf_fweh_queue_item - event item on event queue.
+ *
+ * @q: list element for queuing.
+@@ -85,6 +41,7 @@ struct brcmf_fweh_queue_item {
+ u8 ifidx;
+ u8 ifaddr[ETH_ALEN];
+ struct brcmf_event_msg_be emsg;
++ u32 datalen;
+ u8 data[0];
+ };
+
+@@ -294,6 +251,11 @@ static void brcmf_fweh_event_worker(stru
+ brcmf_dbg_hex_dump(BRCMF_EVENT_ON(), event->data,
+ min_t(u32, emsg.datalen, 64),
+ "event payload, len=%d\n", emsg.datalen);
++ if (emsg.datalen > event->datalen) {
++ brcmf_err("event invalid length header=%d, msg=%d\n",
++ event->datalen, emsg.datalen);
++ goto event_free;
++ }
+
+ /* special handling of interface event */
+ if (event->code == BRCMF_E_IF) {
+@@ -439,7 +401,8 @@ int brcmf_fweh_activate_events(struct br
+ * dispatch the event to a registered handler (using worker).
+ */
+ void brcmf_fweh_process_event(struct brcmf_pub *drvr,
+- struct brcmf_event *event_packet)
++ struct brcmf_event *event_packet,
++ u32 packet_len)
+ {
+ enum brcmf_fweh_event_code code;
+ struct brcmf_fweh_info *fweh = &drvr->fweh;
+@@ -459,6 +422,9 @@ void brcmf_fweh_process_event(struct brc
+ if (code != BRCMF_E_IF && !fweh->evt_handler[code])
+ return;
+
++ if (datalen > BRCMF_DCMD_MAXLEN)
++ return;
++
+ if (in_interrupt())
+ alloc_flag = GFP_ATOMIC;
+
+@@ -472,6 +438,7 @@ void brcmf_fweh_process_event(struct brc
+ /* use memcpy to get aligned event message */
+ memcpy(&event->emsg, &event_packet->msg, sizeof(event->emsg));
+ memcpy(event->data, data, datalen);
++ event->datalen = datalen;
+ memcpy(event->ifaddr, event_packet->eth.h_dest, ETH_ALEN);
+
+ brcmf_fweh_queue_event(fweh, event);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
+@@ -27,7 +27,6 @@
+ struct brcmf_pub;
+ struct brcmf_if;
+ struct brcmf_cfg80211_info;
+-struct brcmf_event;
+
+ /* list of firmware events */
+ #define BRCMF_FWEH_EVENT_ENUM_DEFLIST \
+@@ -180,13 +179,55 @@ enum brcmf_fweh_event_code {
+ /**
+ * definitions for event packet validation.
+ */
+-#define BRCMF_EVENT_OUI_OFFSET 19
+-#define BRCM_OUI "\x00\x10\x18"
+-#define DOT11_OUI_LEN 3
+-#define BCMILCP_BCM_SUBTYPE_EVENT 1
++#define BRCM_OUI "\x00\x10\x18"
++#define BCMILCP_BCM_SUBTYPE_EVENT 1
+
+
+ /**
++ * struct brcm_ethhdr - broadcom specific ether header.
++ *
++ * @subtype: subtype for this packet.
++ * @length: TODO: length of appended data.
++ * @version: version indication.
++ * @oui: OUI of this packet.
++ * @usr_subtype: subtype for this OUI.
++ */
++struct brcm_ethhdr {
++ __be16 subtype;
++ __be16 length;
++ u8 version;
++ u8 oui[3];
++ __be16 usr_subtype;
++} __packed;
++
++struct brcmf_event_msg_be {
++ __be16 version;
++ __be16 flags;
++ __be32 event_type;
++ __be32 status;
++ __be32 reason;
++ __be32 auth_type;
++ __be32 datalen;
++ u8 addr[ETH_ALEN];
++ char ifname[IFNAMSIZ];
++ u8 ifidx;
++ u8 bsscfgidx;
++} __packed;
++
++/**
++ * struct brcmf_event - contents of broadcom event packet.
++ *
++ * @eth: standard ether header.
++ * @hdr: broadcom specific ether header.
++ * @msg: common part of the actual event message.
++ */
++struct brcmf_event {
++ struct ethhdr eth;
++ struct brcm_ethhdr hdr;
++ struct brcmf_event_msg_be msg;
++} __packed;
++
++/**
+ * struct brcmf_event_msg - firmware event message.
+ *
+ * @version: version information.
+@@ -256,34 +297,35 @@ void brcmf_fweh_unregister(struct brcmf_
+ enum brcmf_fweh_event_code code);
+ int brcmf_fweh_activate_events(struct brcmf_if *ifp);
+ void brcmf_fweh_process_event(struct brcmf_pub *drvr,
+- struct brcmf_event *event_packet);
++ struct brcmf_event *event_packet,
++ u32 packet_len);
+ void brcmf_fweh_p2pdev_setup(struct brcmf_if *ifp, bool ongoing);
+
+ static inline void brcmf_fweh_process_skb(struct brcmf_pub *drvr,
+ struct sk_buff *skb)
+ {
+ struct brcmf_event *event_packet;
+- u8 *data;
+ u16 usr_stype;
+
+ /* only process events when protocol matches */
+ if (skb->protocol != cpu_to_be16(ETH_P_LINK_CTL))
+ return;
+
++ if ((skb->len + ETH_HLEN) < sizeof(*event_packet))
++ return;
++
+ /* check for BRCM oui match */
+ event_packet = (struct brcmf_event *)skb_mac_header(skb);
+- data = (u8 *)event_packet;
+- data += BRCMF_EVENT_OUI_OFFSET;
+- if (memcmp(BRCM_OUI, data, DOT11_OUI_LEN))
++ if (memcmp(BRCM_OUI, &event_packet->hdr.oui[0],
++ sizeof(event_packet->hdr.oui)))
+ return;
+
+ /* final match on usr_subtype */
+- data += DOT11_OUI_LEN;
+- usr_stype = get_unaligned_be16(data);
++ usr_stype = get_unaligned_be16(&event_packet->hdr.usr_subtype);
+ if (usr_stype != BCMILCP_BCM_SUBTYPE_EVENT)
+ return;
+
+- brcmf_fweh_process_event(drvr, event_packet);
++ brcmf_fweh_process_event(drvr, event_packet, skb->len + ETH_HLEN);
+ }
+
+ #endif /* FWEH_H_ */
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+@@ -1361,6 +1361,11 @@ int brcmf_p2p_notify_action_frame_rx(str
+ u16 mgmt_type;
+ u8 action;
+
++ if (e->datalen < sizeof(*rxframe)) {
++ brcmf_dbg(SCAN, "Event data to small. Ignore\n");
++ return 0;
++ }
++
+ ch.chspec = be16_to_cpu(rxframe->chanspec);
+ cfg->d11inf.decchspec(&ch);
+ /* Check if wpa_supplicant has registered for this frame */
+@@ -1858,6 +1863,11 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
+ brcmf_dbg(INFO, "Enter: event %d reason %d\n", e->event_code,
+ e->reason);
+
++ if (e->datalen < sizeof(*rxframe)) {
++ brcmf_dbg(SCAN, "Event data to small. Ignore\n");
++ return 0;
++ }
++
+ ch.chspec = be16_to_cpu(rxframe->chanspec);
+ cfg->d11inf.decchspec(&ch);
+
--- /dev/null
+From: Franky Lin <frankyl@broadcom.com>
+Date: Wed, 17 Feb 2016 11:26:55 +0100
+Subject: [PATCH] brcmfmac: add neighbor discovery offload ip address table
+ configuration
+
+Configure ipv6 address for neighbor discovery offload ip table in
+firmware obtained through ipv6 address notification callback.
+
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Franky Lin <frankyl@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -456,7 +456,7 @@ send_key_to_dongle(struct brcmf_if *ifp,
+ }
+
+ static s32
+-brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable)
++brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable)
+ {
+ s32 err;
+ u32 mode;
+@@ -484,6 +484,15 @@ brcmf_configure_arp_offload(struct brcmf
+ enable, mode);
+ }
+
++ err = brcmf_fil_iovar_int_set(ifp, "ndoe", enable);
++ if (err) {
++ brcmf_dbg(TRACE, "failed to configure (%d) ND offload err = %d\n",
++ enable, err);
++ err = 0;
++ } else
++ brcmf_dbg(TRACE, "successfully configured (%d) ND offload to 0x%x\n",
++ enable, mode);
++
+ return err;
+ }
+
+@@ -3543,7 +3552,7 @@ static s32 brcmf_cfg80211_resume(struct
+ brcmf_report_wowl_wakeind(wiphy, ifp);
+ brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0);
+ brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0);
+- brcmf_configure_arp_offload(ifp, true);
++ brcmf_configure_arp_nd_offload(ifp, true);
+ brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM,
+ cfg->wowl.pre_pmmode);
+ cfg->wowl.active = false;
+@@ -3567,7 +3576,7 @@ static void brcmf_configure_wowl(struct
+
+ brcmf_dbg(TRACE, "Suspend, wowl config.\n");
+
+- brcmf_configure_arp_offload(ifp, false);
++ brcmf_configure_arp_nd_offload(ifp, false);
+ brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PM, &cfg->wowl.pre_pmmode);
+ brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, PM_MAX);
+
+@@ -4336,7 +4345,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+
+ if (!mbss) {
+ brcmf_set_mpc(ifp, 0);
+- brcmf_configure_arp_offload(ifp, false);
++ brcmf_configure_arp_nd_offload(ifp, false);
+ }
+
+ /* find the RSN_IE */
+@@ -4482,7 +4491,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+ exit:
+ if ((err) && (!mbss)) {
+ brcmf_set_mpc(ifp, 1);
+- brcmf_configure_arp_offload(ifp, true);
++ brcmf_configure_arp_nd_offload(ifp, true);
+ }
+ return err;
+ }
+@@ -4540,7 +4549,7 @@ static int brcmf_cfg80211_stop_ap(struct
+ brcmf_err("bss_enable config failed %d\n", err);
+ }
+ brcmf_set_mpc(ifp, 1);
+- brcmf_configure_arp_offload(ifp, true);
++ brcmf_configure_arp_nd_offload(ifp, true);
+ clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
+ brcmf_net_setcarrier(ifp, false);
+
+@@ -6287,7 +6296,7 @@ static s32 brcmf_config_dongle(struct br
+ if (err)
+ goto default_conf_out;
+
+- brcmf_configure_arp_offload(ifp, true);
++ brcmf_configure_arp_nd_offload(ifp, true);
+
+ cfg->dongle_up = true;
+ default_conf_out:
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -20,6 +20,8 @@
+ #include <linux/inetdevice.h>
+ #include <net/cfg80211.h>
+ #include <net/rtnetlink.h>
++#include <net/addrconf.h>
++#include <net/ipv6.h>
+ #include <brcmu_utils.h>
+ #include <brcmu_wifi.h>
+
+@@ -172,6 +174,35 @@ _brcmf_set_mac_address(struct work_struc
+ }
+ }
+
++#if IS_ENABLED(CONFIG_IPV6)
++static void _brcmf_update_ndtable(struct work_struct *work)
++{
++ struct brcmf_if *ifp;
++ int i, ret;
++
++ ifp = container_of(work, struct brcmf_if, ndoffload_work);
++
++ /* clear the table in firmware */
++ ret = brcmf_fil_iovar_data_set(ifp, "nd_hostip_clear", NULL, 0);
++ if (ret) {
++ brcmf_dbg(TRACE, "fail to clear nd ip table err:%d\n", ret);
++ return;
++ }
++
++ for (i = 0; i < ifp->ipv6addr_idx; i++) {
++ ret = brcmf_fil_iovar_data_set(ifp, "nd_hostip",
++ &ifp->ipv6_addr_tbl[i],
++ sizeof(struct in6_addr));
++ if (ret)
++ brcmf_err("add nd ip err %d\n", ret);
++ }
++}
++#else
++static void _brcmf_update_ndtable(struct work_struct *work)
++{
++}
++#endif
++
+ static int brcmf_netdev_set_mac_address(struct net_device *ndev, void *addr)
+ {
+ struct brcmf_if *ifp = netdev_priv(ndev);
+@@ -685,6 +716,7 @@ int brcmf_net_attach(struct brcmf_if *if
+
+ INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address);
+ INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list);
++ INIT_WORK(&ifp->ndoffload_work, _brcmf_update_ndtable);
+
+ if (rtnl_locked)
+ err = register_netdevice(ndev);
+@@ -884,6 +916,7 @@ static void brcmf_del_if(struct brcmf_pu
+ if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
+ cancel_work_sync(&ifp->setmacaddr_work);
+ cancel_work_sync(&ifp->multicast_work);
++ cancel_work_sync(&ifp->ndoffload_work);
+ }
+ brcmf_net_detach(ifp->ndev);
+ } else {
+@@ -1025,6 +1058,56 @@ static int brcmf_inetaddr_changed(struct
+ }
+ #endif
+
++#if IS_ENABLED(CONFIG_IPV6)
++static int brcmf_inet6addr_changed(struct notifier_block *nb,
++ unsigned long action, void *data)
++{
++ struct brcmf_pub *drvr = container_of(nb, struct brcmf_pub,
++ inet6addr_notifier);
++ struct inet6_ifaddr *ifa = data;
++ struct brcmf_if *ifp;
++ int i;
++ struct in6_addr *table;
++
++ /* Only handle primary interface */
++ ifp = drvr->iflist[0];
++ if (!ifp)
++ return NOTIFY_DONE;
++ if (ifp->ndev != ifa->idev->dev)
++ return NOTIFY_DONE;
++
++ table = ifp->ipv6_addr_tbl;
++ for (i = 0; i < NDOL_MAX_ENTRIES; i++)
++ if (ipv6_addr_equal(&ifa->addr, &table[i]))
++ break;
++
++ switch (action) {
++ case NETDEV_UP:
++ if (i == NDOL_MAX_ENTRIES) {
++ if (ifp->ipv6addr_idx < NDOL_MAX_ENTRIES) {
++ table[ifp->ipv6addr_idx++] = ifa->addr;
++ } else {
++ for (i = 0; i < NDOL_MAX_ENTRIES - 1; i++)
++ table[i] = table[i + 1];
++ table[NDOL_MAX_ENTRIES - 1] = ifa->addr;
++ }
++ }
++ break;
++ case NETDEV_DOWN:
++ if (i < NDOL_MAX_ENTRIES)
++ for (; i < ifp->ipv6addr_idx; i++)
++ table[i] = table[i + 1];
++ break;
++ default:
++ break;
++ }
++
++ schedule_work(&ifp->ndoffload_work);
++
++ return NOTIFY_OK;
++}
++#endif
++
+ int brcmf_attach(struct device *dev)
+ {
+ struct brcmf_pub *drvr = NULL;
+@@ -1164,30 +1247,41 @@ int brcmf_bus_start(struct device *dev)
+ #ifdef CONFIG_INET
+ drvr->inetaddr_notifier.notifier_call = brcmf_inetaddr_changed;
+ ret = register_inetaddr_notifier(&drvr->inetaddr_notifier);
++ if (ret)
++ goto fail;
++
++#if IS_ENABLED(CONFIG_IPV6)
++ drvr->inet6addr_notifier.notifier_call = brcmf_inet6addr_changed;
++ ret = register_inet6addr_notifier(&drvr->inet6addr_notifier);
++ if (ret) {
++ unregister_inetaddr_notifier(&drvr->inetaddr_notifier);
++ goto fail;
++ }
+ #endif
++#endif /* CONFIG_INET */
++
++ return 0;
+
+ fail:
+- if (ret < 0) {
+- brcmf_err("failed: %d\n", ret);
+- if (drvr->config) {
+- brcmf_cfg80211_detach(drvr->config);
+- drvr->config = NULL;
+- }
+- if (drvr->fws) {
+- brcmf_fws_del_interface(ifp);
+- brcmf_fws_deinit(drvr);
+- }
+- if (ifp)
+- brcmf_net_detach(ifp->ndev);
+- if (p2p_ifp)
+- brcmf_net_detach(p2p_ifp->ndev);
+- drvr->iflist[0] = NULL;
+- drvr->iflist[1] = NULL;
+- if (brcmf_ignoring_probe_fail(drvr))
+- ret = 0;
+- return ret;
++ brcmf_err("failed: %d\n", ret);
++ if (drvr->config) {
++ brcmf_cfg80211_detach(drvr->config);
++ drvr->config = NULL;
++ }
++ if (drvr->fws) {
++ brcmf_fws_del_interface(ifp);
++ brcmf_fws_deinit(drvr);
+ }
+- return 0;
++ if (ifp)
++ brcmf_net_detach(ifp->ndev);
++ if (p2p_ifp)
++ brcmf_net_detach(p2p_ifp->ndev);
++ drvr->iflist[0] = NULL;
++ drvr->iflist[1] = NULL;
++ if (brcmf_ignoring_probe_fail(drvr))
++ ret = 0;
++
++ return ret;
+ }
+
+ void brcmf_bus_add_txhdrlen(struct device *dev, uint len)
+@@ -1237,6 +1331,10 @@ void brcmf_detach(struct device *dev)
+ unregister_inetaddr_notifier(&drvr->inetaddr_notifier);
+ #endif
+
++#if IS_ENABLED(CONFIG_IPV6)
++ unregister_inet6addr_notifier(&drvr->inet6addr_notifier);
++#endif
++
+ /* stop firmware event handling */
+ brcmf_fweh_detach(drvr);
+ if (drvr->config)
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+@@ -48,6 +48,8 @@
+ */
+ #define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32
+
++#define NDOL_MAX_ENTRIES 8
++
+ /**
+ * struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info
+ *
+@@ -143,6 +145,7 @@ struct brcmf_pub {
+ #endif
+
+ struct notifier_block inetaddr_notifier;
++ struct notifier_block inet6addr_notifier;
+ struct brcmf_mp_device *settings;
+ };
+
+@@ -175,6 +178,7 @@ enum brcmf_netif_stop_reason {
+ * @stats: interface specific network statistics.
+ * @setmacaddr_work: worker object for setting mac address.
+ * @multicast_work: worker object for multicast provisioning.
++ * @ndoffload_work: worker object for neighbor discovery offload configuration.
+ * @fws_desc: interface specific firmware-signalling descriptor.
+ * @ifidx: interface index in device firmware.
+ * @bsscfgidx: index of bss associated with this interface.
+@@ -191,6 +195,7 @@ struct brcmf_if {
+ struct net_device_stats stats;
+ struct work_struct setmacaddr_work;
+ struct work_struct multicast_work;
++ struct work_struct ndoffload_work;
+ struct brcmf_fws_mac_descriptor *fws_desc;
+ int ifidx;
+ s32 bsscfgidx;
+@@ -199,6 +204,8 @@ struct brcmf_if {
+ spinlock_t netif_stop_lock;
+ atomic_t pend_8021x_cnt;
+ wait_queue_head_t pend_8021x_wait;
++ struct in6_addr ipv6_addr_tbl[NDOL_MAX_ENTRIES];
++ u8 ipv6addr_idx;
+ };
+
+ struct brcmf_skb_reorder_data {
--- /dev/null
+From: Franky Lin <frankyl@broadcom.com>
+Date: Wed, 17 Feb 2016 11:26:56 +0100
+Subject: [PATCH] brcmfmac: check return for ARP ip setting iovar
+
+The return value of iovar set function should be saved and checked.
+
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Franky Lin <frankyl@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1039,14 +1039,14 @@ static int brcmf_inetaddr_changed(struct
+ return NOTIFY_OK;
+ }
+ for (i = 0; i < ARPOL_MAX_ENTRIES; i++) {
+- if (addr_table[i] != 0) {
+- brcmf_fil_iovar_data_set(ifp,
+- "arp_hostip", &addr_table[i],
+- sizeof(addr_table[i]));
+- if (ret)
+- brcmf_err("add arp ip err %d\n",
+- ret);
+- }
++ if (addr_table[i] == 0)
++ continue;
++ ret = brcmf_fil_iovar_data_set(ifp, "arp_hostip",
++ &addr_table[i],
++ sizeof(addr_table[i]));
++ if (ret)
++ brcmf_err("add arp ip err %d\n",
++ ret);
+ }
+ }
+ break;
--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:00 +0100
+Subject: [PATCH] brcmfmac: remove pcie gen1 support
+
+The PCIE bus driver supports older gen1 (v1) chips, but there is no
+actual device which is using this older pcie core which is supported
+by brcmfmac. Remove all gen1 related code.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+@@ -100,9 +100,6 @@ static struct brcmf_firmware_mapping brc
+ #define BRCMF_PCIE_PCIE2REG_CONFIGDATA 0x124
+ #define BRCMF_PCIE_PCIE2REG_H2D_MAILBOX 0x140
+
+-#define BRCMF_PCIE_GENREV1 1
+-#define BRCMF_PCIE_GENREV2 2
+-
+ #define BRCMF_PCIE2_INTA 0x01
+ #define BRCMF_PCIE2_INTB 0x02
+
+@@ -257,9 +254,7 @@ struct brcmf_pciedev_info {
+ u32 ram_size;
+ struct brcmf_chip *ci;
+ u32 coreid;
+- u32 generic_corerev;
+ struct brcmf_pcie_shared_info shared;
+- void (*ringbell)(struct brcmf_pciedev_info *devinfo);
+ wait_queue_head_t mbdata_resp_wait;
+ bool mbdata_completed;
+ bool irq_allocated;
+@@ -746,68 +741,22 @@ static void brcmf_pcie_bus_console_read(
+ }
+
+
+-static __used void brcmf_pcie_ringbell_v1(struct brcmf_pciedev_info *devinfo)
+-{
+- u32 reg_value;
+-
+- brcmf_dbg(PCIE, "RING !\n");
+- reg_value = brcmf_pcie_read_reg32(devinfo,
+- BRCMF_PCIE_PCIE2REG_MAILBOXINT);
+- reg_value |= BRCMF_PCIE2_INTB;
+- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT,
+- reg_value);
+-}
+-
+-
+-static void brcmf_pcie_ringbell_v2(struct brcmf_pciedev_info *devinfo)
+-{
+- brcmf_dbg(PCIE, "RING !\n");
+- /* Any arbitrary value will do, lets use 1 */
+- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_H2D_MAILBOX, 1);
+-}
+-
+-
+ static void brcmf_pcie_intr_disable(struct brcmf_pciedev_info *devinfo)
+ {
+- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1)
+- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_INTMASK,
+- 0);
+- else
+- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK,
+- 0);
++ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK, 0);
+ }
+
+
+ static void brcmf_pcie_intr_enable(struct brcmf_pciedev_info *devinfo)
+ {
+- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1)
+- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_INTMASK,
+- BRCMF_PCIE_INT_DEF);
+- else
+- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK,
+- BRCMF_PCIE_MB_INT_D2H_DB |
+- BRCMF_PCIE_MB_INT_FN0_0 |
+- BRCMF_PCIE_MB_INT_FN0_1);
++ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK,
++ BRCMF_PCIE_MB_INT_D2H_DB |
++ BRCMF_PCIE_MB_INT_FN0_0 |
++ BRCMF_PCIE_MB_INT_FN0_1);
+ }
+
+
+-static irqreturn_t brcmf_pcie_quick_check_isr_v1(int irq, void *arg)
+-{
+- struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg;
+- u32 status;
+-
+- status = 0;
+- pci_read_config_dword(devinfo->pdev, BRCMF_PCIE_REG_INTSTATUS, &status);
+- if (status) {
+- brcmf_pcie_intr_disable(devinfo);
+- brcmf_dbg(PCIE, "Enter\n");
+- return IRQ_WAKE_THREAD;
+- }
+- return IRQ_NONE;
+-}
+-
+-
+-static irqreturn_t brcmf_pcie_quick_check_isr_v2(int irq, void *arg)
++static irqreturn_t brcmf_pcie_quick_check_isr(int irq, void *arg)
+ {
+ struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg;
+
+@@ -820,29 +769,7 @@ static irqreturn_t brcmf_pcie_quick_chec
+ }
+
+
+-static irqreturn_t brcmf_pcie_isr_thread_v1(int irq, void *arg)
+-{
+- struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg;
+- const struct pci_dev *pdev = devinfo->pdev;
+- u32 status;
+-
+- devinfo->in_irq = true;
+- status = 0;
+- pci_read_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, &status);
+- brcmf_dbg(PCIE, "Enter %x\n", status);
+- if (status) {
+- pci_write_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, status);
+- if (devinfo->state == BRCMFMAC_PCIE_STATE_UP)
+- brcmf_proto_msgbuf_rx_trigger(&devinfo->pdev->dev);
+- }
+- if (devinfo->state == BRCMFMAC_PCIE_STATE_UP)
+- brcmf_pcie_intr_enable(devinfo);
+- devinfo->in_irq = false;
+- return IRQ_HANDLED;
+-}
+-
+-
+-static irqreturn_t brcmf_pcie_isr_thread_v2(int irq, void *arg)
++static irqreturn_t brcmf_pcie_isr_thread(int irq, void *arg)
+ {
+ struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg;
+ u32 status;
+@@ -879,28 +806,14 @@ static int brcmf_pcie_request_irq(struct
+ brcmf_pcie_intr_disable(devinfo);
+
+ brcmf_dbg(PCIE, "Enter\n");
+- /* is it a v1 or v2 implementation */
++
+ pci_enable_msi(pdev);
+- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) {
+- if (request_threaded_irq(pdev->irq,
+- brcmf_pcie_quick_check_isr_v1,
+- brcmf_pcie_isr_thread_v1,
+- IRQF_SHARED, "brcmf_pcie_intr",
+- devinfo)) {
+- pci_disable_msi(pdev);
+- brcmf_err("Failed to request IRQ %d\n", pdev->irq);
+- return -EIO;
+- }
+- } else {
+- if (request_threaded_irq(pdev->irq,
+- brcmf_pcie_quick_check_isr_v2,
+- brcmf_pcie_isr_thread_v2,
+- IRQF_SHARED, "brcmf_pcie_intr",
+- devinfo)) {
+- pci_disable_msi(pdev);
+- brcmf_err("Failed to request IRQ %d\n", pdev->irq);
+- return -EIO;
+- }
++ if (request_threaded_irq(pdev->irq, brcmf_pcie_quick_check_isr,
++ brcmf_pcie_isr_thread, IRQF_SHARED,
++ "brcmf_pcie_intr", devinfo)) {
++ pci_disable_msi(pdev);
++ brcmf_err("Failed to request IRQ %d\n", pdev->irq);
++ return -EIO;
+ }
+ devinfo->irq_allocated = true;
+ return 0;
+@@ -931,16 +844,9 @@ static void brcmf_pcie_release_irq(struc
+ if (devinfo->in_irq)
+ brcmf_err("Still in IRQ (processing) !!!\n");
+
+- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) {
+- status = 0;
+- pci_read_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, &status);
+- pci_write_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, status);
+- } else {
+- status = brcmf_pcie_read_reg32(devinfo,
+- BRCMF_PCIE_PCIE2REG_MAILBOXINT);
+- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT,
+- status);
+- }
++ status = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT);
++ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT, status);
++
+ devinfo->irq_allocated = false;
+ }
+
+@@ -989,7 +895,9 @@ static int brcmf_pcie_ring_mb_ring_bell(
+ if (devinfo->state != BRCMFMAC_PCIE_STATE_UP)
+ return -EIO;
+
+- devinfo->ringbell(devinfo);
++ brcmf_dbg(PCIE, "RING !\n");
++ /* Any arbitrary value will do, lets use 1 */
++ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_H2D_MAILBOX, 1);
+
+ return 0;
+ }
+@@ -1503,9 +1411,6 @@ static int brcmf_pcie_download_fw_nvram(
+ u32 address;
+ u32 resetintr;
+
+- devinfo->ringbell = brcmf_pcie_ringbell_v2;
+- devinfo->generic_corerev = BRCMF_PCIE_GENREV2;
+-
+ brcmf_dbg(PCIE, "Halt ARM.\n");
+ err = brcmf_pcie_enter_download_state(devinfo);
+ if (err)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -40,7 +40,7 @@ MODULE_AUTHOR("Broadcom Corporation");
+@@ -42,7 +42,7 @@ MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
MODULE_LICENSE("Dual BSD/GPL");
--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:02 +0100
+Subject: [PATCH] brcmfmac: move module init and exit to common
+
+In preparation of module parameters for all devices the module init
+and exit routines are moved to the common file.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -28,6 +28,10 @@
+ #include "tracepoint.h"
+ #include "common.h"
+
++MODULE_AUTHOR("Broadcom Corporation");
++MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
++MODULE_LICENSE("Dual BSD/GPL");
++
+ const u8 ALLFFMAC[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+ #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40
+@@ -221,7 +225,7 @@ void __brcmf_dbg(u32 level, const char *
+ }
+ #endif
+
+-void brcmf_mp_attach(void)
++static void brcmf_mp_attach(void)
+ {
+ strlcpy(brcmf_mp_global.firmware_path, brcmf_firmware_path,
+ BRCMF_FW_ALTPATH_LEN);
+@@ -249,3 +253,33 @@ void brcmf_mp_device_detach(struct brcmf
+ kfree(drvr->settings);
+ }
+
++static int __init brcmfmac_module_init(void)
++{
++ int err;
++
++ /* Initialize debug system first */
++ brcmf_debugfs_init();
++
++#ifdef CPTCFG_BRCMFMAC_SDIO
++ brcmf_sdio_init();
++#endif
++ /* Initialize global module paramaters */
++ brcmf_mp_attach();
++
++ /* Continue the initialization by registering the different busses */
++ err = brcmf_core_init();
++ if (err)
++ brcmf_debugfs_exit();
++
++ return err;
++}
++
++static void __exit brcmfmac_module_exit(void)
++{
++ brcmf_core_exit();
++ brcmf_debugfs_exit();
++}
++
++module_init(brcmfmac_module_init);
++module_exit(brcmfmac_module_exit);
++
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+@@ -89,7 +89,6 @@ struct brcmf_mp_device {
+ struct cc_translate *country_codes;
+ };
+
+-void brcmf_mp_attach(void);
+ int brcmf_mp_device_attach(struct brcmf_pub *drvr);
+ void brcmf_mp_device_detach(struct brcmf_pub *drvr);
+ #ifdef DEBUG
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -38,10 +38,6 @@
+ #include "pcie.h"
+ #include "common.h"
+
+-MODULE_AUTHOR("Broadcom Corporation");
+-MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
+-MODULE_LICENSE("Dual BSD/GPL");
+-
+ #define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(950)
+
+ /* AMPDU rx reordering definitions */
+@@ -1422,19 +1418,15 @@ static void brcmf_driver_register(struct
+ }
+ static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register);
+
+-static int __init brcmfmac_module_init(void)
++int __init brcmf_core_init(void)
+ {
+- brcmf_debugfs_init();
+-#ifdef CPTCFG_BRCMFMAC_SDIO
+- brcmf_sdio_init();
+-#endif
+ if (!schedule_work(&brcmf_driver_work))
+ return -EBUSY;
+
+ return 0;
+ }
+
+-static void __exit brcmfmac_module_exit(void)
++void __exit brcmf_core_exit(void)
+ {
+ cancel_work_sync(&brcmf_driver_work);
+
+@@ -1447,8 +1439,5 @@ static void __exit brcmfmac_module_exit(
+ #ifdef CPTCFG_BRCMFMAC_PCIE
+ brcmf_pcie_exit();
+ #endif
+- brcmf_debugfs_exit();
+ }
+
+-module_init(brcmfmac_module_init);
+-module_exit(brcmfmac_module_exit);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+@@ -227,5 +227,7 @@ void brcmf_txflowblock_if(struct brcmf_i
+ void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
+ void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
+ void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
++int __init brcmf_core_init(void);
++void __exit brcmf_core_exit(void);
+
+ #endif /* BRCMFMAC_CORE_H */
--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:03 +0100
+Subject: [PATCH] brcmfmac: add wowl gtk rekeying offload support
+
+This patch adds support for gtk rekeying offload and for gtk
+rekeying failure during wowl mode.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3526,6 +3526,10 @@ static void brcmf_report_wowl_wakeind(st
+ else
+ wakeup_data.net_detect = cfg->wowl.nd_info;
+ }
++ if (wakeind & BRCMF_WOWL_GTK_FAILURE) {
++ brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_GTK_FAILURE\n");
++ wakeup_data.gtk_rekey_failure = true;
++ }
+ } else {
+ wakeup = NULL;
+ }
+@@ -3607,6 +3611,8 @@ static void brcmf_configure_wowl(struct
+ brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND,
+ brcmf_wowl_nd_results);
+ }
++ if (wowl->gtk_rekey_failure)
++ wowl_config |= BRCMF_WOWL_GTK_FAILURE;
+ if (!test_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state))
+ wowl_config |= BRCMF_WOWL_UNASSOC;
+
+@@ -4874,7 +4880,32 @@ static int brcmf_cfg80211_tdls_oper(stru
+ return ret;
+ }
+
+-static struct cfg80211_ops wl_cfg80211_ops = {
++#ifdef CONFIG_PM
++static int
++brcmf_cfg80211_set_rekey_data(struct wiphy *wiphy, struct net_device *ndev,
++ struct cfg80211_gtk_rekey_data *gtk)
++{
++ struct brcmf_if *ifp = netdev_priv(ndev);
++ struct brcmf_gtk_keyinfo_le gtk_le;
++ int ret;
++
++ brcmf_dbg(TRACE, "Enter, bssidx=%d\n", ifp->bsscfgidx);
++
++ memcpy(gtk_le.kck, gtk->kck, sizeof(gtk_le.kck));
++ memcpy(gtk_le.kek, gtk->kek, sizeof(gtk_le.kek));
++ memcpy(gtk_le.replay_counter, gtk->replay_ctr,
++ sizeof(gtk_le.replay_counter));
++
++ ret = brcmf_fil_iovar_data_set(ifp, "gtk_key_info", >k_le,
++ sizeof(gtk_le));
++ if (ret < 0)
++ brcmf_err("gtk_key_info iovar failed: ret=%d\n", ret);
++
++ return ret;
++}
++#endif
++
++static struct cfg80211_ops brcmf_cfg80211_ops = {
+ .add_virtual_intf = brcmf_cfg80211_add_iface,
+ .del_virtual_intf = brcmf_cfg80211_del_iface,
+ .change_virtual_intf = brcmf_cfg80211_change_iface,
+@@ -6139,19 +6170,18 @@ static void brcmf_wiphy_wowl_params(stru
+ {
+ #ifdef CONFIG_PM
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+- s32 err;
+- u32 wowl_cap;
+
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) {
+- err = brcmf_fil_iovar_int_get(ifp, "wowl_cap", &wowl_cap);
+- if (!err) {
+- if (wowl_cap & BRCMF_WOWL_PFN_FOUND) {
+- brcmf_wowlan_support.flags |=
+- WIPHY_WOWLAN_NET_DETECT;
+- init_waitqueue_head(&cfg->wowl.nd_data_wait);
+- }
++ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ND)) {
++ brcmf_wowlan_support.flags |= WIPHY_WOWLAN_NET_DETECT;
++ init_waitqueue_head(&cfg->wowl.nd_data_wait);
+ }
+ }
++ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK)) {
++ brcmf_wowlan_support.flags |= WIPHY_WOWLAN_SUPPORTS_GTK_REKEY;
++ brcmf_wowlan_support.flags |= WIPHY_WOWLAN_GTK_REKEY_FAILURE;
++ }
++
+ wiphy->wowlan = &brcmf_wowlan_support;
+ #endif
+ }
+@@ -6538,6 +6568,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
+ struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev;
+ struct brcmf_cfg80211_info *cfg;
+ struct wiphy *wiphy;
++ struct cfg80211_ops *ops;
+ struct brcmf_cfg80211_vif *vif;
+ struct brcmf_if *ifp;
+ s32 err = 0;
+@@ -6549,8 +6580,17 @@ struct brcmf_cfg80211_info *brcmf_cfg802
+ return NULL;
+ }
+
++ ops = kzalloc(sizeof(*ops), GFP_KERNEL);
++ if (!ops)
++ return NULL;
++
++ memcpy(ops, &brcmf_cfg80211_ops, sizeof(*ops));
+ ifp = netdev_priv(ndev);
+- wiphy = wiphy_new(&wl_cfg80211_ops, sizeof(struct brcmf_cfg80211_info));
++#ifdef CONFIG_PM
++ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK))
++ ops->set_rekey_data = brcmf_cfg80211_set_rekey_data;
++#endif
++ wiphy = wiphy_new(ops, sizeof(struct brcmf_cfg80211_info));
+ if (!wiphy) {
+ brcmf_err("Could not allocate wiphy device\n");
+ return NULL;
+@@ -6560,6 +6600,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
+
+ cfg = wiphy_priv(wiphy);
+ cfg->wiphy = wiphy;
++ cfg->ops = ops;
+ cfg->pub = drvr;
+ init_vif_event(&cfg->vif_event);
+ INIT_LIST_HEAD(&cfg->vif_list);
+@@ -6686,6 +6727,7 @@ priv_out:
+ ifp->vif = NULL;
+ wiphy_out:
+ brcmf_free_wiphy(wiphy);
++ kfree(ops);
+ return NULL;
+ }
+
+@@ -6696,6 +6738,7 @@ void brcmf_cfg80211_detach(struct brcmf_
+
+ brcmf_btcoex_detach(cfg);
+ wiphy_unregister(cfg->wiphy);
++ kfree(cfg->ops);
+ wl_deinit_priv(cfg);
+ brcmf_free_wiphy(cfg->wiphy);
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+@@ -256,6 +256,7 @@ struct brcmf_cfg80211_wowl {
+ * struct brcmf_cfg80211_info - dongle private data of cfg80211 interface
+ *
+ * @wiphy: wiphy object for cfg80211 interface.
++ * @ops: pointer to copy of ops as registered with wiphy object.
+ * @conf: dongle configuration.
+ * @p2p: peer-to-peer specific information.
+ * @btcoex: Bluetooth coexistence information.
+@@ -288,6 +289,7 @@ struct brcmf_cfg80211_wowl {
+ */
+ struct brcmf_cfg80211_info {
+ struct wiphy *wiphy;
++ struct cfg80211_ops *ops;
+ struct brcmf_cfg80211_conf *conf;
+ struct brcmf_p2p_info p2p;
+ struct brcmf_btcoex_info *btcoex;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+@@ -136,6 +136,7 @@ void brcmf_feat_attach(struct brcmf_pub
+ {
+ struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
+ struct brcmf_pno_macaddr_le pfn_mac;
++ u32 wowl_cap;
+ s32 err;
+
+ brcmf_feat_firmware_capabilities(ifp);
+@@ -143,6 +144,17 @@ void brcmf_feat_attach(struct brcmf_pub
+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
+ if (drvr->bus_if->wowl_supported)
+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
++ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL)) {
++ err = brcmf_fil_iovar_int_get(ifp, "wowl_cap", &wowl_cap);
++ if (!err) {
++ if (wowl_cap & BRCMF_WOWL_PFN_FOUND)
++ ifp->drvr->feat_flags |=
++ BIT(BRCMF_FEAT_WOWL_ND);
++ if (wowl_cap & BRCMF_WOWL_GTK_FAILURE)
++ ifp->drvr->feat_flags |=
++ BIT(BRCMF_FEAT_WOWL_GTK);
++ }
++ }
+ /* MBSS does not work for 43362 */
+ if (drvr->bus_if->chip == BRCM_CC_43362_CHIP_ID)
+ ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+@@ -27,6 +27,8 @@
+ * RSDB: Real Simultaneous Dual Band
+ * TDLS: Tunneled Direct Link Setup
+ * SCAN_RANDOM_MAC: Random MAC during (net detect) scheduled scan.
++ * WOWL_ND: WOWL net detect (PNO)
++ * WOWL_GTK: (WOWL) GTK rekeying offload
+ */
+ #define BRCMF_FEAT_LIST \
+ BRCMF_FEAT_DEF(MBSS) \
+@@ -36,7 +38,9 @@
+ BRCMF_FEAT_DEF(P2P) \
+ BRCMF_FEAT_DEF(RSDB) \
+ BRCMF_FEAT_DEF(TDLS) \
+- BRCMF_FEAT_DEF(SCAN_RANDOM_MAC)
++ BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \
++ BRCMF_FEAT_DEF(WOWL_ND) \
++ BRCMF_FEAT_DEF(WOWL_GTK)
+
+ /*
+ * Quirks:
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+@@ -111,7 +111,9 @@
+ /* Wakeup if received matched secured pattern: */
+ #define BRCMF_WOWL_SECURE (1 << 25)
+ /* Wakeup on finding preferred network */
+-#define BRCMF_WOWL_PFN_FOUND (1 << 26)
++#define BRCMF_WOWL_PFN_FOUND (1 << 27)
++/* Wakeup on receiving pairwise key EAP packets: */
++#define WIPHY_WOWL_EAP_PK (1 << 28)
+ /* Link Down indication in WoWL mode: */
+ #define BRCMF_WOWL_LINKDOWN (1 << 31)
+
+@@ -136,6 +138,10 @@
+
+ #define BRCMF_MCSSET_LEN 16
+
++#define BRCMF_RSN_KCK_LENGTH 16
++#define BRCMF_RSN_KEK_LENGTH 16
++#define BRCMF_RSN_REPLAY_LEN 8
++
+ /* join preference types for join_pref iovar */
+ enum brcmf_join_pref_types {
+ BRCMF_JOIN_PREF_RSSI = 1,
+@@ -789,4 +795,17 @@ struct brcmf_pktcnt_le {
+ __le32 rx_ocast_good_pkt;
+ };
+
++/**
++ * struct brcmf_gtk_keyinfo_le - GTP rekey data
++ *
++ * @kck: key confirmation key.
++ * @kek: key encryption key.
++ * @replay_counter: replay counter.
++ */
++struct brcmf_gtk_keyinfo_le {
++ u8 kck[BRCMF_RSN_KCK_LENGTH];
++ u8 kek[BRCMF_RSN_KEK_LENGTH];
++ u8 replay_counter[BRCMF_RSN_REPLAY_LEN];
++};
++
+ #endif /* FWIL_TYPES_H_ */
--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:04 +0100
+Subject: [PATCH] brcmfmac: move platform data retrieval code to common
+
+In preparation of module parameters for all devices the module
+platform data retrieval is moved from sdio to common. It is still
+only used for sdio devices.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -27,8 +27,6 @@
+ #include <linux/mmc/sdio_func.h>
+ #include <linux/mmc/card.h>
+ #include <linux/mmc/host.h>
+-#include <linux/platform_device.h>
+-#include <linux/platform_data/brcmfmac-sdio.h>
+ #include <linux/pm_runtime.h>
+ #include <linux/suspend.h>
+ #include <linux/errno.h>
+@@ -46,7 +44,6 @@
+ #include "bus.h"
+ #include "debug.h"
+ #include "sdio.h"
+-#include "of.h"
+ #include "core.h"
+ #include "common.h"
+
+@@ -106,18 +103,18 @@ static void brcmf_sdiod_dummy_irqhandler
+
+ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
+ {
++ struct brcmfmac_sdio_platform_data *pdata;
+ int ret = 0;
+ u8 data;
+ u32 addr, gpiocontrol;
+ unsigned long flags;
+
+- if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
++ pdata = sdiodev->pdata;
++ if ((pdata) && (pdata->oob_irq_supported)) {
+ brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
+- sdiodev->pdata->oob_irq_nr);
+- ret = request_irq(sdiodev->pdata->oob_irq_nr,
+- brcmf_sdiod_oob_irqhandler,
+- sdiodev->pdata->oob_irq_flags,
+- "brcmf_oob_intr",
++ pdata->oob_irq_nr);
++ ret = request_irq(pdata->oob_irq_nr, brcmf_sdiod_oob_irqhandler,
++ pdata->oob_irq_flags, "brcmf_oob_intr",
+ &sdiodev->func[1]->dev);
+ if (ret != 0) {
+ brcmf_err("request_irq failed %d\n", ret);
+@@ -129,7 +126,7 @@ int brcmf_sdiod_intr_register(struct brc
+ sdiodev->irq_en = true;
+ spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
+
+- ret = enable_irq_wake(sdiodev->pdata->oob_irq_nr);
++ ret = enable_irq_wake(pdata->oob_irq_nr);
+ if (ret != 0) {
+ brcmf_err("enable_irq_wake failed %d\n", ret);
+ return ret;
+@@ -158,7 +155,7 @@ int brcmf_sdiod_intr_register(struct brc
+
+ /* redirect, configure and enable io for interrupt signal */
+ data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
+- if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
++ if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
+ data |= SDIO_SEPINT_ACT_HI;
+ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
+
+@@ -176,9 +173,12 @@ int brcmf_sdiod_intr_register(struct brc
+
+ int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
+ {
++ struct brcmfmac_sdio_platform_data *pdata;
++
+ brcmf_dbg(SDIO, "Entering\n");
+
+- if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
++ pdata = sdiodev->pdata;
++ if ((pdata) && (pdata->oob_irq_supported)) {
+ sdio_claim_host(sdiodev->func[1]);
+ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
+@@ -187,11 +187,10 @@ int brcmf_sdiod_intr_unregister(struct b
+ if (sdiodev->oob_irq_requested) {
+ sdiodev->oob_irq_requested = false;
+ if (sdiodev->irq_wake) {
+- disable_irq_wake(sdiodev->pdata->oob_irq_nr);
++ disable_irq_wake(pdata->oob_irq_nr);
+ sdiodev->irq_wake = false;
+ }
+- free_irq(sdiodev->pdata->oob_irq_nr,
+- &sdiodev->func[1]->dev);
++ free_irq(pdata->oob_irq_nr, &sdiodev->func[1]->dev);
+ sdiodev->irq_en = false;
+ }
+ } else {
+@@ -1103,8 +1102,6 @@ static const struct sdio_device_id brcmf
+ };
+ MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
+
+-static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
+-
+
+ static void brcmf_sdiod_acpi_set_power_manageable(struct device *dev,
+ int val)
+@@ -1167,10 +1164,7 @@ static int brcmf_ops_sdio_probe(struct s
+ dev_set_drvdata(&func->dev, bus_if);
+ dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
+ sdiodev->dev = &sdiodev->func[1]->dev;
+- sdiodev->pdata = brcmfmac_sdio_pdata;
+-
+- if (!sdiodev->pdata)
+- brcmf_of_probe(sdiodev);
++ sdiodev->pdata = brcmf_get_module_param(sdiodev->dev);
+
+ #ifdef CONFIG_PM_SLEEP
+ /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
+@@ -1296,7 +1290,7 @@ static const struct dev_pm_ops brcmf_sdi
+ static struct sdio_driver brcmf_sdmmc_driver = {
+ .probe = brcmf_ops_sdio_probe,
+ .remove = brcmf_ops_sdio_remove,
+- .name = BRCMFMAC_SDIO_PDATA_NAME,
++ .name = KBUILD_MODNAME,
+ .id_table = brcmf_sdmmc_ids,
+ .drv = {
+ .owner = THIS_MODULE,
+@@ -1306,37 +1300,6 @@ static struct sdio_driver brcmf_sdmmc_dr
+ },
+ };
+
+-static int __init brcmf_sdio_pd_probe(struct platform_device *pdev)
+-{
+- brcmf_dbg(SDIO, "Enter\n");
+-
+- brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev);
+-
+- if (brcmfmac_sdio_pdata->power_on)
+- brcmfmac_sdio_pdata->power_on();
+-
+- return 0;
+-}
+-
+-static int brcmf_sdio_pd_remove(struct platform_device *pdev)
+-{
+- brcmf_dbg(SDIO, "Enter\n");
+-
+- if (brcmfmac_sdio_pdata->power_off)
+- brcmfmac_sdio_pdata->power_off();
+-
+- sdio_unregister_driver(&brcmf_sdmmc_driver);
+-
+- return 0;
+-}
+-
+-static struct platform_driver brcmf_sdio_pd = {
+- .remove = brcmf_sdio_pd_remove,
+- .driver = {
+- .name = BRCMFMAC_SDIO_PDATA_NAME,
+- }
+-};
+-
+ void brcmf_sdio_register(void)
+ {
+ int ret;
+@@ -1350,19 +1313,6 @@ void brcmf_sdio_exit(void)
+ {
+ brcmf_dbg(SDIO, "Enter\n");
+
+- if (brcmfmac_sdio_pdata)
+- platform_driver_unregister(&brcmf_sdio_pd);
+- else
+- sdio_unregister_driver(&brcmf_sdmmc_driver);
++ sdio_unregister_driver(&brcmf_sdmmc_driver);
+ }
+
+-void __init brcmf_sdio_init(void)
+-{
+- int ret;
+-
+- brcmf_dbg(SDIO, "Enter\n");
+-
+- ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
+- if (ret == -ENODEV)
+- brcmf_dbg(SDIO, "No platform data available.\n");
+-}
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -27,6 +27,7 @@
+ #include "fwil_types.h"
+ #include "tracepoint.h"
+ #include "common.h"
++#include "of.h"
+
+ MODULE_AUTHOR("Broadcom Corporation");
+ MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
+@@ -79,6 +80,7 @@ module_param_named(ignore_probe_fail, br
+ MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging");
+ #endif
+
++static struct brcmfmac_sdio_platform_data *brcmfmac_pdata;
+ struct brcmf_mp_global_t brcmf_mp_global;
+
+ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
+@@ -231,6 +233,13 @@ static void brcmf_mp_attach(void)
+ BRCMF_FW_ALTPATH_LEN);
+ }
+
++struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev)
++{
++ if (!brcmfmac_pdata)
++ brcmf_of_probe(dev, &brcmfmac_pdata);
++ return brcmfmac_pdata;
++}
++
+ int brcmf_mp_device_attach(struct brcmf_pub *drvr)
+ {
+ drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC);
+@@ -253,6 +262,35 @@ void brcmf_mp_device_detach(struct brcmf
+ kfree(drvr->settings);
+ }
+
++static int __init brcmf_common_pd_probe(struct platform_device *pdev)
++{
++ brcmf_dbg(INFO, "Enter\n");
++
++ brcmfmac_pdata = dev_get_platdata(&pdev->dev);
++
++ if (brcmfmac_pdata->power_on)
++ brcmfmac_pdata->power_on();
++
++ return 0;
++}
++
++static int brcmf_common_pd_remove(struct platform_device *pdev)
++{
++ brcmf_dbg(INFO, "Enter\n");
++
++ if (brcmfmac_pdata->power_off)
++ brcmfmac_pdata->power_off();
++
++ return 0;
++}
++
++static struct platform_driver brcmf_pd = {
++ .remove = brcmf_common_pd_remove,
++ .driver = {
++ .name = BRCMFMAC_SDIO_PDATA_NAME,
++ }
++};
++
+ static int __init brcmfmac_module_init(void)
+ {
+ int err;
+@@ -260,16 +298,21 @@ static int __init brcmfmac_module_init(v
+ /* Initialize debug system first */
+ brcmf_debugfs_init();
+
+-#ifdef CPTCFG_BRCMFMAC_SDIO
+- brcmf_sdio_init();
+-#endif
++ /* Get the platform data (if available) for our devices */
++ err = platform_driver_probe(&brcmf_pd, brcmf_common_pd_probe);
++ if (err == -ENODEV)
++ brcmf_dbg(INFO, "No platform data available.\n");
++
+ /* Initialize global module paramaters */
+ brcmf_mp_attach();
+
+ /* Continue the initialization by registering the different busses */
+ err = brcmf_core_init();
+- if (err)
++ if (err) {
+ brcmf_debugfs_exit();
++ if (brcmfmac_pdata)
++ platform_driver_unregister(&brcmf_pd);
++ }
+
+ return err;
+ }
+@@ -277,6 +320,8 @@ static int __init brcmfmac_module_init(v
+ static void __exit brcmfmac_module_exit(void)
+ {
+ brcmf_core_exit();
++ if (brcmfmac_pdata)
++ platform_driver_unregister(&brcmf_pd);
+ brcmf_debugfs_exit();
+ }
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+@@ -15,6 +15,8 @@
+ #ifndef BRCMFMAC_COMMON_H
+ #define BRCMFMAC_COMMON_H
+
++#include <linux/platform_device.h>
++#include <linux/platform_data/brcmfmac-sdio.h>
+ #include "fwil_types.h"
+
+ extern const u8 ALLFFMAC[ETH_ALEN];
+@@ -89,6 +91,7 @@ struct brcmf_mp_device {
+ struct cc_translate *country_codes;
+ };
+
++struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev);
+ int brcmf_mp_device_attach(struct brcmf_pub *drvr);
+ void brcmf_mp_device_detach(struct brcmf_pub *drvr);
+ #ifdef DEBUG
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+@@ -16,17 +16,16 @@
+ #include <linux/init.h>
+ #include <linux/of.h>
+ #include <linux/of_irq.h>
+-#include <linux/mmc/card.h>
+-#include <linux/platform_data/brcmfmac-sdio.h>
+-#include <linux/mmc/sdio_func.h>
+
+ #include <defs.h>
+ #include "debug.h"
+-#include "sdio.h"
++#include "core.h"
++#include "common.h"
++#include "of.h"
+
+-void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev)
++void
++brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio)
+ {
+- struct device *dev = sdiodev->dev;
+ struct device_node *np = dev->of_node;
+ int irq;
+ u32 irqf;
+@@ -35,12 +34,12 @@ void brcmf_of_probe(struct brcmf_sdio_de
+ if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
+ return;
+
+- sdiodev->pdata = devm_kzalloc(dev, sizeof(*sdiodev->pdata), GFP_KERNEL);
+- if (!sdiodev->pdata)
++ *sdio = devm_kzalloc(dev, sizeof(*sdio), GFP_KERNEL);
++ if (!(*sdio))
+ return;
+
+ if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
+- sdiodev->pdata->drive_strength = val;
++ (*sdio)->drive_strength = val;
+
+ /* make sure there are interrupts defined in the node */
+ if (!of_find_property(np, "interrupts", NULL))
+@@ -53,7 +52,7 @@ void brcmf_of_probe(struct brcmf_sdio_de
+ }
+ irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
+
+- sdiodev->pdata->oob_irq_supported = true;
+- sdiodev->pdata->oob_irq_nr = irq;
+- sdiodev->pdata->oob_irq_flags = irqf;
++ (*sdio)->oob_irq_supported = true;
++ (*sdio)->oob_irq_nr = irq;
++ (*sdio)->oob_irq_flags = irqf;
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
+@@ -14,9 +14,11 @@
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+ #ifdef CONFIG_OF
+-void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev);
++void
++brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio);
+ #else
+-static void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev)
++static void brcmf_of_probe(struct device *dev,
++ struct brcmfmac_sdio_platform_data **sdio)
+ {
+ }
+ #endif /* CONFIG_OF */
--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:05 +0100
+Subject: [PATCH] brcmfmac: keep ARP and ND offload enabled during WOWL
+
+Currently ARP and ND (IPv6 Neigbor Discovery) offload get disabled
+on entering suspend. However when firmwares support the wowl_cap
+iovar then these offload routines can be kept enabled as they
+will work during WOWL as well.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -3556,7 +3556,8 @@ static s32 brcmf_cfg80211_resume(struct
+ brcmf_report_wowl_wakeind(wiphy, ifp);
+ brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0);
+ brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0);
+- brcmf_configure_arp_nd_offload(ifp, true);
++ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND))
++ brcmf_configure_arp_nd_offload(ifp, true);
+ brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM,
+ cfg->wowl.pre_pmmode);
+ cfg->wowl.active = false;
+@@ -3580,7 +3581,8 @@ static void brcmf_configure_wowl(struct
+
+ brcmf_dbg(TRACE, "Suspend, wowl config.\n");
+
+- brcmf_configure_arp_nd_offload(ifp, false);
++ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND))
++ brcmf_configure_arp_nd_offload(ifp, false);
+ brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PM, &cfg->wowl.pre_pmmode);
+ brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, PM_MAX);
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+@@ -147,6 +147,7 @@ void brcmf_feat_attach(struct brcmf_pub
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL)) {
+ err = brcmf_fil_iovar_int_get(ifp, "wowl_cap", &wowl_cap);
+ if (!err) {
++ ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_WOWL_ARP_ND);
+ if (wowl_cap & BRCMF_WOWL_PFN_FOUND)
+ ifp->drvr->feat_flags |=
+ BIT(BRCMF_FEAT_WOWL_ND);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+@@ -29,6 +29,7 @@
+ * SCAN_RANDOM_MAC: Random MAC during (net detect) scheduled scan.
+ * WOWL_ND: WOWL net detect (PNO)
+ * WOWL_GTK: (WOWL) GTK rekeying offload
++ * WOWL_ARP_ND: ARP and Neighbor Discovery offload support during WOWL.
+ */
+ #define BRCMF_FEAT_LIST \
+ BRCMF_FEAT_DEF(MBSS) \
+@@ -40,7 +41,8 @@
+ BRCMF_FEAT_DEF(TDLS) \
+ BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \
+ BRCMF_FEAT_DEF(WOWL_ND) \
+- BRCMF_FEAT_DEF(WOWL_GTK)
++ BRCMF_FEAT_DEF(WOWL_GTK) \
++ BRCMF_FEAT_DEF(WOWL_ARP_ND)
+
+ /*
+ * Quirks:
--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:07 +0100
+Subject: [PATCH] brcmfmac: switch to new platform data
+
+Platform data is only available for sdio. With this patch a new
+platform data structure is being used which allows for platform
+data for any device and configurable per device. This patch only
+switches to the new structure and adds support for SDIO devices.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -103,7 +103,7 @@ static void brcmf_sdiod_dummy_irqhandler
+
+ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
+ {
+- struct brcmfmac_sdio_platform_data *pdata;
++ struct brcmfmac_sdio_pd *pdata;
+ int ret = 0;
+ u8 data;
+ u32 addr, gpiocontrol;
+@@ -173,7 +173,7 @@ int brcmf_sdiod_intr_register(struct brc
+
+ int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
+ {
+- struct brcmfmac_sdio_platform_data *pdata;
++ struct brcmfmac_sdio_pd *pdata;
+
+ brcmf_dbg(SDIO, "Entering\n");
+
+@@ -1164,17 +1164,6 @@ static int brcmf_ops_sdio_probe(struct s
+ dev_set_drvdata(&func->dev, bus_if);
+ dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
+ sdiodev->dev = &sdiodev->func[1]->dev;
+- sdiodev->pdata = brcmf_get_module_param(sdiodev->dev);
+-
+-#ifdef CONFIG_PM_SLEEP
+- /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
+- * is true or when platform data OOB irq is true).
+- */
+- if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
+- ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
+- (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
+- bus_if->wowl_supported = true;
+-#endif
+
+ brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_DOWN);
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -6459,8 +6459,8 @@ int brcmf_cfg80211_wait_vif_event(struct
+ static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
+ struct brcmf_fil_country_le *ccreq)
+ {
+- struct cc_translate *country_codes;
+- struct cc_entry *cc;
++ struct brcmfmac_pd_cc *country_codes;
++ struct brcmfmac_pd_cc_entry *cc;
+ s32 found_index;
+ int i;
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -80,7 +80,7 @@ module_param_named(ignore_probe_fail, br
+ MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging");
+ #endif
+
+-static struct brcmfmac_sdio_platform_data *brcmfmac_pdata;
++static struct brcmfmac_platform_data *brcmfmac_pdata;
+ struct brcmf_mp_global_t brcmf_mp_global;
+
+ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
+@@ -229,15 +229,46 @@ void __brcmf_dbg(u32 level, const char *
+
+ static void brcmf_mp_attach(void)
+ {
++ /* If module param firmware path is set then this will always be used,
++ * if not set then if available use the platform data version. To make
++ * sure it gets initialized at all, always copy the module param version
++ */
+ strlcpy(brcmf_mp_global.firmware_path, brcmf_firmware_path,
+ BRCMF_FW_ALTPATH_LEN);
++ if ((brcmfmac_pdata) && (brcmfmac_pdata->fw_alternative_path) &&
++ (brcmf_mp_global.firmware_path[0] == '\0')) {
++ strlcpy(brcmf_mp_global.firmware_path,
++ brcmfmac_pdata->fw_alternative_path,
++ BRCMF_FW_ALTPATH_LEN);
++ }
+ }
+
+-struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev)
+-{
+- if (!brcmfmac_pdata)
+- brcmf_of_probe(dev, &brcmfmac_pdata);
+- return brcmfmac_pdata;
++struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
++ enum brcmf_bus_type bus_type,
++ u32 chip, u32 chiprev)
++{
++ struct brcmfmac_sdio_pd *pdata;
++ struct brcmfmac_pd_device *device_pd;
++ int i;
++
++ if (brcmfmac_pdata) {
++ for (i = 0; i < brcmfmac_pdata->device_count; i++) {
++ device_pd = &brcmfmac_pdata->devices[i];
++ if ((device_pd->bus_type == bus_type) &&
++ (device_pd->id == chip) &&
++ ((device_pd->rev == chiprev) ||
++ (device_pd->rev == -1))) {
++ brcmf_dbg(INFO, "Platform data for device found\n");
++ if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO)
++ return &device_pd->bus.sdio;
++ break;
++ }
++ }
++ }
++ pdata = NULL;
++ brcmf_of_probe(dev, &pdata);
++
++ return pdata;
+ }
+
+ int brcmf_mp_device_attach(struct brcmf_pub *drvr)
+@@ -287,7 +318,7 @@ static int brcmf_common_pd_remove(struct
+ static struct platform_driver brcmf_pd = {
+ .remove = brcmf_common_pd_remove,
+ .driver = {
+- .name = BRCMFMAC_SDIO_PDATA_NAME,
++ .name = BRCMFMAC_PDATA_NAME,
+ }
+ };
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+@@ -16,7 +16,7 @@
+ #define BRCMFMAC_COMMON_H
+
+ #include <linux/platform_device.h>
+-#include <linux/platform_data/brcmfmac-sdio.h>
++#include <linux/platform_data/brcmfmac.h>
+ #include "fwil_types.h"
+
+ extern const u8 ALLFFMAC[ETH_ALEN];
+@@ -43,33 +43,6 @@ struct brcmf_mp_global_t {
+ extern struct brcmf_mp_global_t brcmf_mp_global;
+
+ /**
+- * struct cc_entry - Struct for translating user space country code (iso3166) to
+- * firmware country code and revision.
+- *
+- * @iso3166: iso3166 alpha 2 country code string.
+- * @cc: firmware country code string.
+- * @rev: firmware country code revision.
+- */
+-struct cc_entry {
+- char iso3166[BRCMF_COUNTRY_BUF_SZ];
+- char cc[BRCMF_COUNTRY_BUF_SZ];
+- s32 rev;
+-};
+-
+-/**
+- * struct cc_translate - Struct for translating country codes as set by user
+- * space to a country code and rev which can be used by
+- * firmware.
+- *
+- * @table_size: number of entries in table (> 0)
+- * @table: dynamic array of 1 or more elements with translation information.
+- */
+-struct cc_translate {
+- int table_size;
+- struct cc_entry table[0];
+-};
+-
+-/**
+ * struct brcmf_mp_device - Device module paramaters.
+ *
+ * @sdiod_txglomsz: SDIO txglom size.
+@@ -88,10 +61,12 @@ struct brcmf_mp_device {
+ int fcmode;
+ bool roamoff;
+ bool ignore_probe_fail;
+- struct cc_translate *country_codes;
++ struct brcmfmac_pd_cc *country_codes;
+ };
+
+-struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev);
++struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
++ enum brcmf_bus_type bus_type,
++ u32 chip, u32 chiprev);
+ int brcmf_mp_device_attach(struct brcmf_pub *drvr);
+ void brcmf_mp_device_detach(struct brcmf_pub *drvr);
+ #ifdef DEBUG
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+@@ -23,8 +23,7 @@
+ #include "common.h"
+ #include "of.h"
+
+-void
+-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio)
++void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
+ {
+ struct device_node *np = dev->of_node;
+ int irq;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
+@@ -15,10 +15,9 @@
+ */
+ #ifdef CONFIG_OF
+ void
+-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio);
++brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio);
+ #else
+-static void brcmf_of_probe(struct device *dev,
+- struct brcmfmac_sdio_platform_data **sdio)
++static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
+ {
+ }
+ #endif /* CONFIG_OF */
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -33,8 +33,6 @@
+ #include <linux/bcma/bcma.h>
+ #include <linux/debugfs.h>
+ #include <linux/vmalloc.h>
+-#include <linux/platform_data/brcmfmac-sdio.h>
+-#include <linux/moduleparam.h>
+ #include <asm/unaligned.h>
+ #include <defs.h>
+ #include <brcmu_wifi.h>
+@@ -44,6 +42,8 @@
+ #include "sdio.h"
+ #include "chip.h"
+ #include "firmware.h"
++#include "core.h"
++#include "common.h"
+
+ #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500)
+ #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500)
+@@ -3775,26 +3775,28 @@ static const struct brcmf_buscore_ops br
+ static bool
+ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
+ {
++ struct brcmf_sdio_dev *sdiodev;
+ u8 clkctl = 0;
+ int err = 0;
+ int reg_addr;
+ u32 reg_val;
+ u32 drivestrength;
+
+- sdio_claim_host(bus->sdiodev->func[1]);
++ sdiodev = bus->sdiodev;
++ sdio_claim_host(sdiodev->func[1]);
+
+ pr_debug("F1 signature read @0x18000000=0x%4x\n",
+- brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
++ brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL));
+
+ /*
+ * Force PLL off until brcmf_chip_attach()
+ * programs PLL control regs
+ */
+
+- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
++ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ BRCMF_INIT_CLKCTL1, &err);
+ if (!err)
+- clkctl = brcmf_sdiod_regrb(bus->sdiodev,
++ clkctl = brcmf_sdiod_regrb(sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR, &err);
+
+ if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
+@@ -3803,50 +3805,77 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
+ goto fail;
+ }
+
+- bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
++ bus->ci = brcmf_chip_attach(sdiodev, &brcmf_sdio_buscore_ops);
+ if (IS_ERR(bus->ci)) {
+ brcmf_err("brcmf_chip_attach failed!\n");
+ bus->ci = NULL;
+ goto fail;
+ }
++ sdiodev->pdata = brcmf_get_module_param(sdiodev->dev,
++ BRCMF_BUSTYPE_SDIO,
++ bus->ci->chip,
++ bus->ci->chiprev);
++ /* platform specific configuration:
++ * alignments must be at least 4 bytes for ADMA
++ */
++ bus->head_align = ALIGNMENT;
++ bus->sgentry_align = ALIGNMENT;
++ if (sdiodev->pdata) {
++ if (sdiodev->pdata->sd_head_align > ALIGNMENT)
++ bus->head_align = sdiodev->pdata->sd_head_align;
++ if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
++ bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
++ }
++ /* allocate scatter-gather table. sg support
++ * will be disabled upon allocation failure.
++ */
++ brcmf_sdiod_sgtable_alloc(sdiodev);
++
++#ifdef CONFIG_PM_SLEEP
++ /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
++ * is true or when platform data OOB irq is true).
++ */
++ if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
++ ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
++ (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
++ sdiodev->bus_if->wowl_supported = true;
++#endif
+
+ if (brcmf_sdio_kso_init(bus)) {
+ brcmf_err("error enabling KSO\n");
+ goto fail;
+ }
+
+- if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength))
+- drivestrength = bus->sdiodev->pdata->drive_strength;
++ if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength))
++ drivestrength = sdiodev->pdata->drive_strength;
+ else
+ drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
+- brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
++ brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
+
+ /* Set card control so an SDIO card reset does a WLAN backplane reset */
+- reg_val = brcmf_sdiod_regrb(bus->sdiodev,
+- SDIO_CCCR_BRCM_CARDCTRL, &err);
++ reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
+ if (err)
+ goto fail;
+
+ reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
+
+- brcmf_sdiod_regwb(bus->sdiodev,
+- SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
++ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
+ if (err)
+ goto fail;
+
+ /* set PMUControl so a backplane reset does PMU state reload */
+ reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
+- reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err);
++ reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err);
+ if (err)
+ goto fail;
+
+ reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
+
+- brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err);
++ brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err);
+ if (err)
+ goto fail;
+
+- sdio_release_host(bus->sdiodev->func[1]);
++ sdio_release_host(sdiodev->func[1]);
+
+ brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
+
+@@ -3867,7 +3896,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
+ return true;
+
+ fail:
+- sdio_release_host(bus->sdiodev->func[1]);
++ sdio_release_host(sdiodev->func[1]);
+ return false;
+ }
+
+@@ -4045,18 +4074,6 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
+ bus->txminmax = BRCMF_TXMINMAX;
+ bus->tx_seq = SDPCM_SEQ_WRAP - 1;
+
+- /* platform specific configuration:
+- * alignments must be at least 4 bytes for ADMA
+- */
+- bus->head_align = ALIGNMENT;
+- bus->sgentry_align = ALIGNMENT;
+- if (sdiodev->pdata) {
+- if (sdiodev->pdata->sd_head_align > ALIGNMENT)
+- bus->head_align = sdiodev->pdata->sd_head_align;
+- if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
+- bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
+- }
+-
+ /* single-threaded workqueue */
+ wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM,
+ dev_name(&sdiodev->func[1]->dev));
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -184,7 +184,7 @@ struct brcmf_sdio_dev {
+ struct brcmf_sdio *bus;
+ struct device *dev;
+ struct brcmf_bus *bus_if;
+- struct brcmfmac_sdio_platform_data *pdata;
++ struct brcmfmac_sdio_pd *pdata;
+ bool oob_irq_requested;
+ bool irq_en; /* irq enable flags */
+ spinlock_t irq_en_lock;
+--- a/include/linux/platform_data/brcmfmac-sdio.h
++++ /dev/null
+@@ -1,135 +0,0 @@
+-/*
+- * Copyright (c) 2013 Broadcom Corporation
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+- */
+-
+-#ifndef _LINUX_BRCMFMAC_PLATFORM_H
+-#define _LINUX_BRCMFMAC_PLATFORM_H
+-
+-/*
+- * Platform specific driver functions and data. Through the platform specific
+- * device data functions can be provided to help the brcmfmac driver to
+- * operate with the device in combination with the used platform.
+- *
+- * Use the platform data in the following (similar) way:
+- *
+- *
+-#include <brcmfmac_platform.h>
+-
+-
+-static void brcmfmac_power_on(void)
+-{
+-}
+-
+-static void brcmfmac_power_off(void)
+-{
+-}
+-
+-static void brcmfmac_reset(void)
+-{
+-}
+-
+-static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = {
+- .power_on = brcmfmac_power_on,
+- .power_off = brcmfmac_power_off,
+- .reset = brcmfmac_reset
+-};
+-
+-static struct platform_device brcmfmac_device = {
+- .name = BRCMFMAC_SDIO_PDATA_NAME,
+- .id = PLATFORM_DEVID_NONE,
+- .dev.platform_data = &brcmfmac_sdio_pdata
+-};
+-
+-void __init brcmfmac_init_pdata(void)
+-{
+- brcmfmac_sdio_pdata.oob_irq_supported = true;
+- brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB);
+- brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ |
+- IORESOURCE_IRQ_HIGHLEVEL;
+- platform_device_register(&brcmfmac_device);
+-}
+- *
+- *
+- * Note: the brcmfmac can be loaded as module or be statically built-in into
+- * the kernel. If built-in then do note that it uses module_init (and
+- * module_exit) routines which equal device_initcall. So if you intend to
+- * create a module with the platform specific data for the brcmfmac and have
+- * it built-in to the kernel then use a higher initcall then device_initcall
+- * (see init.h). If this is not done then brcmfmac will load without problems
+- * but will not pickup the platform data.
+- *
+- * When the driver does not "detect" platform driver data then it will continue
+- * without reporting anything and just assume there is no data needed. Which is
+- * probably true for most platforms.
+- *
+- * Explanation of the platform_data fields:
+- *
+- * drive_strength: is the preferred drive_strength to be used for the SDIO
+- * pins. If 0 then a default value will be used. This is the target drive
+- * strength, the exact drive strength which will be used depends on the
+- * capabilities of the device.
+- *
+- * oob_irq_supported: does the board have support for OOB interrupts. SDIO
+- * in-band interrupts are relatively slow and for having less overhead on
+- * interrupt processing an out of band interrupt can be used. If the HW
+- * supports this then enable this by setting this field to true and configure
+- * the oob related fields.
+- *
+- * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
+- * used for registering the irq using request_irq function.
+- *
+- * broken_sg_support: flag for broken sg list support of SDIO host controller.
+- * Set this to true if the SDIO host controller has higher align requirement
+- * than 32 bytes for each scatterlist item.
+- *
+- * sd_head_align: alignment requirement for start of data buffer
+- *
+- * sd_sgentry_align: length alignment requirement for each sg entry
+- *
+- * power_on: This function is called by the brcmfmac when the module gets
+- * loaded. This can be particularly useful for low power devices. The platform
+- * spcific routine may for example decide to power up the complete device.
+- * If there is no use-case for this function then provide NULL.
+- *
+- * power_off: This function is called by the brcmfmac when the module gets
+- * unloaded. At this point the device can be powered down or otherwise be reset.
+- * So if an actual power_off is not supported but reset is then reset the device
+- * when this function gets called. This can be particularly useful for low power
+- * devices. If there is no use-case for this function (either power-down or
+- * reset) then provide NULL.
+- *
+- * reset: This function can get called if the device communication broke down.
+- * This functionality is particularly useful in case of SDIO type devices. It is
+- * possible to reset a dongle via sdio data interface, but it requires that
+- * this is fully functional. This function is chip/module specific and this
+- * function should return only after the complete reset has completed.
+- */
+-
+-#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio"
+-
+-struct brcmfmac_sdio_platform_data {
+- unsigned int drive_strength;
+- bool oob_irq_supported;
+- unsigned int oob_irq_nr;
+- unsigned long oob_irq_flags;
+- bool broken_sg_support;
+- unsigned short sd_head_align;
+- unsigned short sd_sgentry_align;
+- void (*power_on)(void);
+- void (*power_off)(void);
+- void (*reset)(void);
+-};
+-
+-#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
+--- /dev/null
++++ b/include/linux/platform_data/brcmfmac.h
+@@ -0,0 +1,185 @@
++/*
++ * Copyright (c) 201 Broadcom Corporation
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
++ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
++ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
++ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#ifndef _LINUX_BRCMFMAC_PLATFORM_H
++#define _LINUX_BRCMFMAC_PLATFORM_H
++
++
++#define BRCMFMAC_PDATA_NAME "brcmfmac"
++
++#define BRCMFMAC_COUNTRY_BUF_SZ 4
++
++
++/*
++ * Platform specific driver functions and data. Through the platform specific
++ * device data functions and data can be provided to help the brcmfmac driver to
++ * operate with the device in combination with the used platform.
++ */
++
++
++/**
++ * Note: the brcmfmac can be loaded as module or be statically built-in into
++ * the kernel. If built-in then do note that it uses module_init (and
++ * module_exit) routines which equal device_initcall. So if you intend to
++ * create a module with the platform specific data for the brcmfmac and have
++ * it built-in to the kernel then use a higher initcall then device_initcall
++ * (see init.h). If this is not done then brcmfmac will load without problems
++ * but will not pickup the platform data.
++ *
++ * When the driver does not "detect" platform driver data then it will continue
++ * without reporting anything and just assume there is no data needed. Which is
++ * probably true for most platforms.
++ */
++
++/**
++ * enum brcmf_bus_type - Bus type identifier. Currently SDIO, USB and PCIE are
++ * supported.
++ */
++enum brcmf_bus_type {
++ BRCMF_BUSTYPE_SDIO,
++ BRCMF_BUSTYPE_USB,
++ BRCMF_BUSTYPE_PCIE
++};
++
++
++/**
++ * struct brcmfmac_sdio_pd - SDIO Device specific platform data.
++ *
++ * @txglomsz: SDIO txglom size. Use 0 if default of driver is to be
++ * used.
++ * @drive_strength: is the preferred drive_strength to be used for the SDIO
++ * pins. If 0 then a default value will be used. This is
++ * the target drive strength, the exact drive strength
++ * which will be used depends on the capabilities of the
++ * device.
++ * @oob_irq_supported: does the board have support for OOB interrupts. SDIO
++ * in-band interrupts are relatively slow and for having
++ * less overhead on interrupt processing an out of band
++ * interrupt can be used. If the HW supports this then
++ * enable this by setting this field to true and configure
++ * the oob related fields.
++ * @oob_irq_nr,
++ * @oob_irq_flags: the OOB interrupt information. The values are used for
++ * registering the irq using request_irq function.
++ * @broken_sg_support: flag for broken sg list support of SDIO host controller.
++ * Set this to true if the SDIO host controller has higher
++ * align requirement than 32 bytes for each scatterlist
++ * item.
++ * @sd_head_align: alignment requirement for start of data buffer.
++ * @sd_sgentry_align: length alignment requirement for each sg entry.
++ * @reset: This function can get called if the device communication
++ * broke down. This functionality is particularly useful in
++ * case of SDIO type devices. It is possible to reset a
++ * dongle via sdio data interface, but it requires that
++ * this is fully functional. This function is chip/module
++ * specific and this function should return only after the
++ * complete reset has completed.
++ */
++struct brcmfmac_sdio_pd {
++ int txglomsz;
++ unsigned int drive_strength;
++ bool oob_irq_supported;
++ unsigned int oob_irq_nr;
++ unsigned long oob_irq_flags;
++ bool broken_sg_support;
++ unsigned short sd_head_align;
++ unsigned short sd_sgentry_align;
++ void (*reset)(void);
++};
++
++/**
++ * struct brcmfmac_pd_cc_entry - Struct for translating user space country code
++ * (iso3166) to firmware country code and
++ * revision.
++ *
++ * @iso3166: iso3166 alpha 2 country code string.
++ * @cc: firmware country code string.
++ * @rev: firmware country code revision.
++ */
++struct brcmfmac_pd_cc_entry {
++ char iso3166[BRCMFMAC_COUNTRY_BUF_SZ];
++ char cc[BRCMFMAC_COUNTRY_BUF_SZ];
++ s32 rev;
++};
++
++/**
++ * struct brcmfmac_pd_cc - Struct for translating country codes as set by user
++ * space to a country code and rev which can be used by
++ * firmware.
++ *
++ * @table_size: number of entries in table (> 0)
++ * @table: array of 1 or more elements with translation information.
++ */
++struct brcmfmac_pd_cc {
++ int table_size;
++ struct brcmfmac_pd_cc_entry table[0];
++};
++
++/**
++ * struct brcmfmac_pd_device - Device specific platform data. (id/rev/bus_type)
++ * is the unique identifier of the device.
++ *
++ * @id: ID of the device for which this data is. In case of SDIO
++ * or PCIE this is the chipid as identified by chip.c In
++ * case of USB this is the chipid as identified by the
++ * device query.
++ * @rev: chip revision, see id.
++ * @bus_type: The type of bus. Some chipid/rev exist for different bus
++ * types. Each bus type has its own set of settings.
++ * @feature_disable: Bitmask of features to disable (override), See feature.c
++ * in brcmfmac for details.
++ * @country_codes: If available, pointer to struct for translating country
++ * codes.
++ * @bus: Bus specific (union) device settings. Currently only
++ * SDIO.
++ */
++struct brcmfmac_pd_device {
++ unsigned int id;
++ unsigned int rev;
++ enum brcmf_bus_type bus_type;
++ unsigned int feature_disable;
++ struct brcmfmac_pd_cc *country_codes;
++ union {
++ struct brcmfmac_sdio_pd sdio;
++ } bus;
++};
++
++/**
++ * struct brcmfmac_platform_data - BRCMFMAC specific platform data.
++ *
++ * @power_on: This function is called by the brcmfmac driver when the module
++ * gets loaded. This can be particularly useful for low power
++ * devices. The platform spcific routine may for example decide to
++ * power up the complete device. If there is no use-case for this
++ * function then provide NULL.
++ * @power_off: This function is called by the brcmfmac when the module gets
++ * unloaded. At this point the devices can be powered down or
++ * otherwise be reset. So if an actual power_off is not supported
++ * but reset is supported by the devices then reset the devices
++ * when this function gets called. This can be particularly useful
++ * for low power devices. If there is no use-case for this
++ * function then provide NULL.
++ */
++struct brcmfmac_platform_data {
++ void (*power_on)(void);
++ void (*power_off)(void);
++ char *fw_alternative_path;
++ int device_count;
++ struct brcmfmac_pd_device devices[0];
++};
++
++
++#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:08 +0100
+Subject: [PATCH] brcmfmac: merge platform data and module paramaters
+
+Merge module parameters and platform data in one struct. This is the
+last step to move to the new platform data per device. Now parameters
+of platform data will be merged with module parameters per device.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -109,8 +109,8 @@ int brcmf_sdiod_intr_register(struct brc
+ u32 addr, gpiocontrol;
+ unsigned long flags;
+
+- pdata = sdiodev->pdata;
+- if ((pdata) && (pdata->oob_irq_supported)) {
++ pdata = &sdiodev->settings->bus.sdio;
++ if (pdata->oob_irq_supported) {
+ brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
+ pdata->oob_irq_nr);
+ ret = request_irq(pdata->oob_irq_nr, brcmf_sdiod_oob_irqhandler,
+@@ -177,8 +177,8 @@ int brcmf_sdiod_intr_unregister(struct b
+
+ brcmf_dbg(SDIO, "Entering\n");
+
+- pdata = sdiodev->pdata;
+- if ((pdata) && (pdata->oob_irq_supported)) {
++ pdata = &sdiodev->settings->bus.sdio;
++ if (pdata->oob_irq_supported) {
+ sdio_claim_host(sdiodev->func[1]);
+ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
+@@ -522,7 +522,7 @@ static int brcmf_sdiod_sglist_rw(struct
+ target_list = pktlist;
+ /* for host with broken sg support, prepare a page aligned list */
+ __skb_queue_head_init(&local_list);
+- if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) {
++ if (!write && sdiodev->settings->bus.sdio.broken_sg_support) {
+ req_sz = 0;
+ skb_queue_walk(pktlist, pkt_next)
+ req_sz += pkt_next->len;
+@@ -629,7 +629,7 @@ static int brcmf_sdiod_sglist_rw(struct
+ }
+ }
+
+- if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) {
++ if (!write && sdiodev->settings->bus.sdio.broken_sg_support) {
+ local_pkt_next = local_list.next;
+ orig_offset = 0;
+ skb_queue_walk(pktlist, pkt_next) {
+@@ -900,7 +900,7 @@ void brcmf_sdiod_sgtable_alloc(struct br
+ return;
+
+ nents = max_t(uint, BRCMF_DEFAULT_RXGLOM_SIZE,
+- sdiodev->bus_if->drvr->settings->sdiod_txglomsz);
++ sdiodev->settings->bus.sdio.txglomsz);
+ nents += (nents >> 4) + 1;
+
+ WARN_ON(nents > sdiodev->max_segment_count);
+@@ -912,7 +912,7 @@ void brcmf_sdiod_sgtable_alloc(struct br
+ sdiodev->sg_support = false;
+ }
+
+- sdiodev->txglomsz = sdiodev->bus_if->drvr->settings->sdiod_txglomsz;
++ sdiodev->txglomsz = sdiodev->settings->bus.sdio.txglomsz;
+ }
+
+ #ifdef CONFIG_PM_SLEEP
+@@ -1246,8 +1246,8 @@ static int brcmf_ops_sdio_suspend(struct
+
+ sdio_flags = MMC_PM_KEEP_POWER;
+ if (sdiodev->wowl_enabled) {
+- if (sdiodev->pdata->oob_irq_supported)
+- enable_irq_wake(sdiodev->pdata->oob_irq_nr);
++ if (sdiodev->settings->bus.sdio.oob_irq_supported)
++ enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
+ else
+ sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+@@ -43,6 +43,8 @@ enum brcmf_bus_protocol_type {
+ BRCMF_PROTO_MSGBUF
+ };
+
++struct brcmf_mp_device;
++
+ struct brcmf_bus_dcmd {
+ char *name;
+ char *param;
+@@ -217,7 +219,7 @@ bool brcmf_c_prec_enq(struct device *dev
+ void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp);
+
+ /* Indication from bus module regarding presence/insertion of dongle. */
+-int brcmf_attach(struct device *dev);
++int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings);
+ /* Indication from bus module regarding removal/absence of dongle */
+ void brcmf_detach(struct device *dev);
+ /* Indication from bus module that dongle should be reset */
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -243,14 +243,35 @@ static void brcmf_mp_attach(void)
+ }
+ }
+
+-struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
+- enum brcmf_bus_type bus_type,
+- u32 chip, u32 chiprev)
++struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
++ enum brcmf_bus_type bus_type,
++ u32 chip, u32 chiprev)
+ {
+- struct brcmfmac_sdio_pd *pdata;
++ struct brcmf_mp_device *settings;
+ struct brcmfmac_pd_device *device_pd;
++ bool found;
+ int i;
+
++ brcmf_dbg(INFO, "Enter, bus=%d, chip=%d, rev=%d\n", bus_type, chip,
++ chiprev);
++ settings = kzalloc(sizeof(*settings), GFP_ATOMIC);
++ if (!settings)
++ return NULL;
++
++ /* start by using the module paramaters */
++ settings->p2p_enable = !!brcmf_p2p_enable;
++ settings->feature_disable = brcmf_feature_disable;
++ settings->fcmode = brcmf_fcmode;
++ settings->roamoff = !!brcmf_roamoff;
++#ifdef DEBUG
++ settings->ignore_probe_fail = !!brcmf_ignore_probe_fail;
++#endif
++
++ if (bus_type == BRCMF_BUSTYPE_SDIO)
++ settings->bus.sdio.txglomsz = brcmf_sdiod_txglomsz;
++
++ /* See if there is any device specific platform data configured */
++ found = false;
+ if (brcmfmac_pdata) {
+ for (i = 0; i < brcmfmac_pdata->device_count; i++) {
+ device_pd = &brcmfmac_pdata->devices[i];
+@@ -259,38 +280,29 @@ struct brcmfmac_sdio_pd *brcmf_get_modul
+ ((device_pd->rev == chiprev) ||
+ (device_pd->rev == -1))) {
+ brcmf_dbg(INFO, "Platform data for device found\n");
++ settings->country_codes =
++ device_pd->country_codes;
+ if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO)
+- return &device_pd->bus.sdio;
++ memcpy(&settings->bus.sdio,
++ &device_pd->bus.sdio,
++ sizeof(settings->bus.sdio));
++ found = true;
+ break;
+ }
+ }
+ }
+- pdata = NULL;
+- brcmf_of_probe(dev, &pdata);
+-
+- return pdata;
+-}
+-
+-int brcmf_mp_device_attach(struct brcmf_pub *drvr)
+-{
+- drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC);
+- if (!drvr->settings)
+- return -ENOMEM;
+-
+- drvr->settings->sdiod_txglomsz = brcmf_sdiod_txglomsz;
+- drvr->settings->p2p_enable = !!brcmf_p2p_enable;
+- drvr->settings->feature_disable = brcmf_feature_disable;
+- drvr->settings->fcmode = brcmf_fcmode;
+- drvr->settings->roamoff = !!brcmf_roamoff;
+-#ifdef DEBUG
+- drvr->settings->ignore_probe_fail = !!brcmf_ignore_probe_fail;
+-#endif
+- return 0;
++ if ((bus_type == BRCMF_BUSTYPE_SDIO) && (!found)) {
++ /* No platform data for this device. In case of SDIO try OF
++ * (Open Firwmare) Device Tree.
++ */
++ brcmf_of_probe(dev, &settings->bus.sdio);
++ }
++ return settings;
+ }
+
+-void brcmf_mp_device_detach(struct brcmf_pub *drvr)
++void brcmf_release_module_param(struct brcmf_mp_device *module_param)
+ {
+- kfree(drvr->settings);
++ kfree(module_param);
+ }
+
+ static int __init brcmf_common_pd_probe(struct platform_device *pdev)
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+@@ -45,41 +45,30 @@ extern struct brcmf_mp_global_t brcmf_mp
+ /**
+ * struct brcmf_mp_device - Device module paramaters.
+ *
+- * @sdiod_txglomsz: SDIO txglom size.
+- * @joinboost_5g_rssi: 5g rssi booost for preferred join selection.
+ * @p2p_enable: Legacy P2P0 enable (old wpa_supplicant).
+ * @feature_disable: Feature_disable bitmask.
+ * @fcmode: FWS flow control.
+ * @roamoff: Firmware roaming off?
++ * @ignore_probe_fail: Ignore probe failure.
+ * @country_codes: If available, pointer to struct for translating country codes
++ * @bus: Bus specific platform data. Only SDIO at the mmoment.
+ */
+ struct brcmf_mp_device {
+- int sdiod_txglomsz;
+- int joinboost_5g_rssi;
+- bool p2p_enable;
+- int feature_disable;
+- int fcmode;
+- bool roamoff;
+- bool ignore_probe_fail;
++ bool p2p_enable;
++ unsigned int feature_disable;
++ int fcmode;
++ bool roamoff;
++ bool ignore_probe_fail;
+ struct brcmfmac_pd_cc *country_codes;
++ union {
++ struct brcmfmac_sdio_pd sdio;
++ } bus;
+ };
+
+-struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
+- enum brcmf_bus_type bus_type,
+- u32 chip, u32 chiprev);
+-int brcmf_mp_device_attach(struct brcmf_pub *drvr);
+-void brcmf_mp_device_detach(struct brcmf_pub *drvr);
+-#ifdef DEBUG
+-static inline bool brcmf_ignoring_probe_fail(struct brcmf_pub *drvr)
+-{
+- return drvr->settings->ignore_probe_fail;
+-}
+-#else
+-static inline bool brcmf_ignoring_probe_fail(struct brcmf_pub *drvr)
+-{
+- return false;
+-}
+-#endif
++struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
++ enum brcmf_bus_type bus_type,
++ u32 chip, u32 chiprev);
++void brcmf_release_module_param(struct brcmf_mp_device *module_param);
+
+ /* Sets dongle media info (drv_version, mac address). */
+ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1104,7 +1104,7 @@ static int brcmf_inet6addr_changed(struc
+ }
+ #endif
+
+-int brcmf_attach(struct device *dev)
++int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings)
+ {
+ struct brcmf_pub *drvr = NULL;
+ int ret = 0;
+@@ -1126,10 +1126,7 @@ int brcmf_attach(struct device *dev)
+ drvr->hdrlen = 0;
+ drvr->bus_if = dev_get_drvdata(dev);
+ drvr->bus_if->drvr = drvr;
+-
+- /* Initialize device specific settings */
+- if (brcmf_mp_device_attach(drvr))
+- goto fail;
++ drvr->settings = settings;
+
+ /* attach debug facilities */
+ brcmf_debug_attach(drvr);
+@@ -1274,7 +1271,7 @@ fail:
+ brcmf_net_detach(p2p_ifp->ndev);
+ drvr->iflist[0] = NULL;
+ drvr->iflist[1] = NULL;
+- if (brcmf_ignoring_probe_fail(drvr))
++ if (drvr->settings->ignore_probe_fail)
+ ret = 0;
+
+ return ret;
+@@ -1350,8 +1347,6 @@ void brcmf_detach(struct device *dev)
+
+ brcmf_proto_detach(drvr);
+
+- brcmf_mp_device_detach(drvr);
+-
+ brcmf_debug_detach(drvr);
+ bus_if->drvr = NULL;
+ kfree(drvr);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+@@ -23,7 +23,7 @@
+ #include "common.h"
+ #include "of.h"
+
+-void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
++void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio)
+ {
+ struct device_node *np = dev->of_node;
+ int irq;
+@@ -33,12 +33,8 @@ void brcmf_of_probe(struct device *dev,
+ if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
+ return;
+
+- *sdio = devm_kzalloc(dev, sizeof(*sdio), GFP_KERNEL);
+- if (!(*sdio))
+- return;
+-
+ if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
+- (*sdio)->drive_strength = val;
++ sdio->drive_strength = val;
+
+ /* make sure there are interrupts defined in the node */
+ if (!of_find_property(np, "interrupts", NULL))
+@@ -51,7 +47,7 @@ void brcmf_of_probe(struct device *dev,
+ }
+ irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
+
+- (*sdio)->oob_irq_supported = true;
+- (*sdio)->oob_irq_nr = irq;
+- (*sdio)->oob_irq_flags = irqf;
++ sdio->oob_irq_supported = true;
++ sdio->oob_irq_nr = irq;
++ sdio->oob_irq_flags = irqf;
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
+@@ -14,10 +14,9 @@
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+ #ifdef CONFIG_OF
+-void
+-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio);
++void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio);
+ #else
+-static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
++static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio)
+ {
+ }
+ #endif /* CONFIG_OF */
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+@@ -37,6 +37,8 @@
+ #include "pcie.h"
+ #include "firmware.h"
+ #include "chip.h"
++#include "core.h"
++#include "common.h"
+
+
+ enum brcmf_pcie_state {
+@@ -266,6 +268,7 @@ struct brcmf_pciedev_info {
+ u16 (*read_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset);
+ void (*write_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
+ u16 value);
++ struct brcmf_mp_device *settings;
+ };
+
+ struct brcmf_pcie_ringbuf {
+@@ -1525,16 +1528,16 @@ static void brcmf_pcie_release_resource(
+ }
+
+
+-static int brcmf_pcie_attach_bus(struct device *dev)
++static int brcmf_pcie_attach_bus(struct brcmf_pciedev_info *devinfo)
+ {
+ int ret;
+
+ /* Attach to the common driver interface */
+- ret = brcmf_attach(dev);
++ ret = brcmf_attach(&devinfo->pdev->dev, devinfo->settings);
+ if (ret) {
+ brcmf_err("brcmf_attach failed\n");
+ } else {
+- ret = brcmf_bus_start(dev);
++ ret = brcmf_bus_start(&devinfo->pdev->dev);
+ if (ret)
+ brcmf_err("dongle is not responding\n");
+ }
+@@ -1672,7 +1675,7 @@ static void brcmf_pcie_setup(struct devi
+ init_waitqueue_head(&devinfo->mbdata_resp_wait);
+
+ brcmf_pcie_intr_enable(devinfo);
+- if (brcmf_pcie_attach_bus(bus->dev) == 0)
++ if (brcmf_pcie_attach_bus(devinfo) == 0)
+ return;
+
+ brcmf_pcie_bus_console_read(devinfo);
+@@ -1716,6 +1719,15 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
+ goto fail;
+ }
+
++ devinfo->settings = brcmf_get_module_param(&devinfo->pdev->dev,
++ BRCMF_BUSTYPE_PCIE,
++ devinfo->ci->chip,
++ devinfo->ci->chiprev);
++ if (!devinfo->settings) {
++ ret = -ENOMEM;
++ goto fail;
++ }
++
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus) {
+ ret = -ENOMEM;
+@@ -1760,6 +1772,8 @@ fail:
+ brcmf_pcie_release_resource(devinfo);
+ if (devinfo->ci)
+ brcmf_chip_detach(devinfo->ci);
++ if (devinfo->settings)
++ brcmf_release_module_param(devinfo->settings);
+ kfree(pcie_bus_dev);
+ kfree(devinfo);
+ return ret;
+@@ -1799,6 +1813,8 @@ brcmf_pcie_remove(struct pci_dev *pdev)
+
+ if (devinfo->ci)
+ brcmf_chip_detach(devinfo->ci);
++ if (devinfo->settings)
++ brcmf_release_module_param(devinfo->settings);
+
+ kfree(devinfo);
+ dev_set_drvdata(&pdev->dev, NULL);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -2442,15 +2442,17 @@ static void brcmf_sdio_bus_stop(struct d
+
+ static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
+ {
++ struct brcmf_sdio_dev *sdiodev;
+ unsigned long flags;
+
+- if (bus->sdiodev->oob_irq_requested) {
+- spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
+- if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) {
+- enable_irq(bus->sdiodev->pdata->oob_irq_nr);
+- bus->sdiodev->irq_en = true;
++ sdiodev = bus->sdiodev;
++ if (sdiodev->oob_irq_requested) {
++ spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
++ if (!sdiodev->irq_en && !atomic_read(&bus->ipend)) {
++ enable_irq(sdiodev->settings->bus.sdio.oob_irq_nr);
++ sdiodev->irq_en = true;
+ }
+- spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
++ spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
+ }
+ }
+
+@@ -3394,9 +3396,7 @@ static int brcmf_sdio_bus_preinit(struct
+ sizeof(u32));
+ } else {
+ /* otherwise, set txglomalign */
+- value = 4;
+- if (sdiodev->pdata)
+- value = sdiodev->pdata->sd_sgentry_align;
++ value = sdiodev->settings->bus.sdio.sd_sgentry_align;
+ /* SDIO ADMA requires at least 32 bit alignment */
+ value = max_t(u32, value, 4);
+ err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
+@@ -3811,21 +3811,25 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
+ bus->ci = NULL;
+ goto fail;
+ }
+- sdiodev->pdata = brcmf_get_module_param(sdiodev->dev,
++ sdiodev->settings = brcmf_get_module_param(sdiodev->dev,
+ BRCMF_BUSTYPE_SDIO,
+ bus->ci->chip,
+ bus->ci->chiprev);
++ if (!sdiodev->settings) {
++ brcmf_err("Failed to get device parameters\n");
++ goto fail;
++ }
+ /* platform specific configuration:
+ * alignments must be at least 4 bytes for ADMA
+ */
+ bus->head_align = ALIGNMENT;
+ bus->sgentry_align = ALIGNMENT;
+- if (sdiodev->pdata) {
+- if (sdiodev->pdata->sd_head_align > ALIGNMENT)
+- bus->head_align = sdiodev->pdata->sd_head_align;
+- if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
+- bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
+- }
++ if (sdiodev->settings->bus.sdio.sd_head_align > ALIGNMENT)
++ bus->head_align = sdiodev->settings->bus.sdio.sd_head_align;
++ if (sdiodev->settings->bus.sdio.sd_sgentry_align > ALIGNMENT)
++ bus->sgentry_align =
++ sdiodev->settings->bus.sdio.sd_sgentry_align;
++
+ /* allocate scatter-gather table. sg support
+ * will be disabled upon allocation failure.
+ */
+@@ -3837,7 +3841,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
+ */
+ if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
+ ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
+- (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
++ (sdiodev->settings->bus.sdio.oob_irq_supported)))
+ sdiodev->bus_if->wowl_supported = true;
+ #endif
+
+@@ -3846,8 +3850,8 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
+ goto fail;
+ }
+
+- if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength))
+- drivestrength = sdiodev->pdata->drive_strength;
++ if (sdiodev->settings->bus.sdio.drive_strength)
++ drivestrength = sdiodev->settings->bus.sdio.drive_strength;
+ else
+ drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
+ brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
+@@ -4124,7 +4128,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
+ bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
+
+ /* Attach to the common layer, reserve hdr space */
+- ret = brcmf_attach(bus->sdiodev->dev);
++ ret = brcmf_attach(bus->sdiodev->dev, bus->sdiodev->settings);
+ if (ret != 0) {
+ brcmf_err("brcmf_attach failed\n");
+ goto fail;
+@@ -4228,6 +4232,8 @@ void brcmf_sdio_remove(struct brcmf_sdio
+ }
+ brcmf_chip_detach(bus->ci);
+ }
++ if (bus->sdiodev->settings)
++ brcmf_release_module_param(bus->sdiodev->settings);
+
+ kfree(bus->rxbuf);
+ kfree(bus->hdrbuf);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -184,7 +184,7 @@ struct brcmf_sdio_dev {
+ struct brcmf_sdio *bus;
+ struct device *dev;
+ struct brcmf_bus *bus_if;
+- struct brcmfmac_sdio_pd *pdata;
++ struct brcmf_mp_device *settings;
+ bool oob_irq_requested;
+ bool irq_en; /* irq enable flags */
+ spinlock_t irq_en_lock;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+@@ -27,6 +27,8 @@
+ #include "debug.h"
+ #include "firmware.h"
+ #include "usb.h"
++#include "core.h"
++#include "common.h"
+
+
+ #define IOCTL_RESP_TIMEOUT msecs_to_jiffies(2000)
+@@ -171,6 +173,7 @@ struct brcmf_usbdev_info {
+ struct urb *bulk_urb; /* used for FW download */
+
+ bool wowl_enabled;
++ struct brcmf_mp_device *settings;
+ };
+
+ static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
+@@ -1027,6 +1030,9 @@ static void brcmf_usb_detach(struct brcm
+
+ kfree(devinfo->tx_reqs);
+ kfree(devinfo->rx_reqs);
++
++ if (devinfo->settings)
++ brcmf_release_module_param(devinfo->settings);
+ }
+
+
+@@ -1136,7 +1142,7 @@ static int brcmf_usb_bus_setup(struct br
+ int ret;
+
+ /* Attach to the common driver interface */
+- ret = brcmf_attach(devinfo->dev);
++ ret = brcmf_attach(devinfo->dev, devinfo->settings);
+ if (ret) {
+ brcmf_err("brcmf_attach failed\n");
+ return ret;
+@@ -1223,6 +1229,14 @@ static int brcmf_usb_probe_cb(struct brc
+ bus->wowl_supported = true;
+ #endif
+
++ devinfo->settings = brcmf_get_module_param(bus->dev, BRCMF_BUSTYPE_USB,
++ bus_pub->devid,
++ bus_pub->chiprev);
++ if (!devinfo->settings) {
++ ret = -ENOMEM;
++ goto fail;
++ }
++
+ if (!brcmf_usb_dlneeded(devinfo)) {
+ ret = brcmf_usb_bus_setup(devinfo);
+ if (ret)
--- /dev/null
+From: Hante Meuleman <hante.meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:09 +0100
+Subject: [PATCH] brcmfmac: integrate add_keyext in add_key
+
+brcmf_add_keyext is called when a key is configured for a specific
+mac address. This function is very similar to the calling function
+brcmf_add_key. Integrate this function and also use existing del_key
+function in case key is to be cleared.
+
+Reviewed-by: Arend Van Spriel <arend.van@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <franky.lin@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -2073,84 +2073,34 @@ done:
+ }
+
+ static s32
+-brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
+- u8 key_idx, const u8 *mac_addr, struct key_params *params)
++brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
++ u8 key_idx, bool pairwise, const u8 *mac_addr)
+ {
+ struct brcmf_if *ifp = netdev_priv(ndev);
+ struct brcmf_wsec_key key;
+ s32 err = 0;
+- u8 keybuf[8];
++
++ brcmf_dbg(TRACE, "Enter\n");
++ if (!check_vif_up(ifp->vif))
++ return -EIO;
++
++ if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
++ /* we ignore this key index in this case */
++ return -EINVAL;
++ }
+
+ memset(&key, 0, sizeof(key));
+- key.index = (u32) key_idx;
+- /* Instead of bcast for ea address for default wep keys,
+- driver needs it to be Null */
+- if (!is_multicast_ether_addr(mac_addr))
+- memcpy((char *)&key.ea, (void *)mac_addr, ETH_ALEN);
+- key.len = (u32) params->key_len;
+- /* check for key index change */
+- if (key.len == 0) {
+- /* key delete */
+- err = send_key_to_dongle(ifp, &key);
+- if (err)
+- brcmf_err("key delete error (%d)\n", err);
+- } else {
+- if (key.len > sizeof(key.data)) {
+- brcmf_err("Invalid key length (%d)\n", key.len);
+- return -EINVAL;
+- }
+
+- brcmf_dbg(CONN, "Setting the key index %d\n", key.index);
+- memcpy(key.data, params->key, key.len);
++ key.index = (u32)key_idx;
++ key.flags = BRCMF_PRIMARY_KEY;
++ key.algo = CRYPTO_ALGO_OFF;
+
+- if (!brcmf_is_apmode(ifp->vif) &&
+- (params->cipher == WLAN_CIPHER_SUITE_TKIP)) {
+- brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
+- memcpy(keybuf, &key.data[24], sizeof(keybuf));
+- memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
+- memcpy(&key.data[16], keybuf, sizeof(keybuf));
+- }
++ brcmf_dbg(CONN, "key index (%d)\n", key_idx);
+
+- /* if IW_ENCODE_EXT_RX_SEQ_VALID set */
+- if (params->seq && params->seq_len == 6) {
+- /* rx iv */
+- u8 *ivptr;
+- ivptr = (u8 *) params->seq;
+- key.rxiv.hi = (ivptr[5] << 24) | (ivptr[4] << 16) |
+- (ivptr[3] << 8) | ivptr[2];
+- key.rxiv.lo = (ivptr[1] << 8) | ivptr[0];
+- key.iv_initialized = true;
+- }
++ /* Set the new key/index */
++ err = send_key_to_dongle(ifp, &key);
+
+- switch (params->cipher) {
+- case WLAN_CIPHER_SUITE_WEP40:
+- key.algo = CRYPTO_ALGO_WEP1;
+- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP40\n");
+- break;
+- case WLAN_CIPHER_SUITE_WEP104:
+- key.algo = CRYPTO_ALGO_WEP128;
+- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n");
+- break;
+- case WLAN_CIPHER_SUITE_TKIP:
+- key.algo = CRYPTO_ALGO_TKIP;
+- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n");
+- break;
+- case WLAN_CIPHER_SUITE_AES_CMAC:
+- key.algo = CRYPTO_ALGO_AES_CCM;
+- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
+- break;
+- case WLAN_CIPHER_SUITE_CCMP:
+- key.algo = CRYPTO_ALGO_AES_CCM;
+- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_CCMP\n");
+- break;
+- default:
+- brcmf_err("Invalid cipher (0x%x)\n", params->cipher);
+- return -EINVAL;
+- }
+- err = send_key_to_dongle(ifp, &key);
+- if (err)
+- brcmf_err("wsec_key error (%d)\n", err);
+- }
++ brcmf_dbg(TRACE, "Exit\n");
+ return err;
+ }
+
+@@ -2163,8 +2113,9 @@ brcmf_cfg80211_add_key(struct wiphy *wip
+ struct brcmf_wsec_key *key;
+ s32 val;
+ s32 wsec;
+- s32 err = 0;
++ s32 err;
+ u8 keybuf[8];
++ bool ext_key;
+
+ brcmf_dbg(TRACE, "Enter\n");
+ brcmf_dbg(CONN, "key index (%d)\n", key_idx);
+@@ -2177,27 +2128,32 @@ brcmf_cfg80211_add_key(struct wiphy *wip
+ return -EINVAL;
+ }
+
+- if (mac_addr &&
+- (params->cipher != WLAN_CIPHER_SUITE_WEP40) &&
+- (params->cipher != WLAN_CIPHER_SUITE_WEP104)) {
+- brcmf_dbg(TRACE, "Exit");
+- return brcmf_add_keyext(wiphy, ndev, key_idx, mac_addr, params);
+- }
+-
+- key = &ifp->vif->profile.key[key_idx];
+- memset(key, 0, sizeof(*key));
++ if (params->key_len == 0)
++ return brcmf_cfg80211_del_key(wiphy, ndev, key_idx, pairwise,
++ mac_addr);
+
+ if (params->key_len > sizeof(key->data)) {
+ brcmf_err("Too long key length (%u)\n", params->key_len);
+- err = -EINVAL;
+- goto done;
++ return -EINVAL;
++ }
++
++ ext_key = false;
++ if (mac_addr && (params->cipher != WLAN_CIPHER_SUITE_WEP40) &&
++ (params->cipher != WLAN_CIPHER_SUITE_WEP104)) {
++ brcmf_dbg(TRACE, "Ext key, mac %pM", mac_addr);
++ ext_key = true;
+ }
++
++ key = &ifp->vif->profile.key[key_idx];
++ memset(key, 0, sizeof(*key));
++ if ((ext_key) && (!is_multicast_ether_addr(mac_addr)))
++ memcpy((char *)&key->ea, (void *)mac_addr, ETH_ALEN);
+ key->len = params->key_len;
+ key->index = key_idx;
+-
+ memcpy(key->data, params->key, key->len);
++ if (!ext_key)
++ key->flags = BRCMF_PRIMARY_KEY;
+
+- key->flags = BRCMF_PRIMARY_KEY;
+ switch (params->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ key->algo = CRYPTO_ALGO_WEP1;
+@@ -2237,7 +2193,7 @@ brcmf_cfg80211_add_key(struct wiphy *wip
+ }
+
+ err = send_key_to_dongle(ifp, key);
+- if (err)
++ if (ext_key || err)
+ goto done;
+
+ err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
+@@ -2256,38 +2212,6 @@ done:
+ brcmf_dbg(TRACE, "Exit\n");
+ return err;
+ }
+-
+-static s32
+-brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
+- u8 key_idx, bool pairwise, const u8 *mac_addr)
+-{
+- struct brcmf_if *ifp = netdev_priv(ndev);
+- struct brcmf_wsec_key key;
+- s32 err = 0;
+-
+- brcmf_dbg(TRACE, "Enter\n");
+- if (!check_vif_up(ifp->vif))
+- return -EIO;
+-
+- if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
+- /* we ignore this key index in this case */
+- return -EINVAL;
+- }
+-
+- memset(&key, 0, sizeof(key));
+-
+- key.index = (u32) key_idx;
+- key.flags = BRCMF_PRIMARY_KEY;
+- key.algo = CRYPTO_ALGO_OFF;
+-
+- brcmf_dbg(CONN, "key index (%d)\n", key_idx);
+-
+- /* Set the new key/index */
+- err = send_key_to_dongle(ifp, &key);
+-
+- brcmf_dbg(TRACE, "Exit\n");
+- return err;
+-}
+
+ static s32
+ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
--- /dev/null
+From: Hante Meuleman <hante.meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:10 +0100
+Subject: [PATCH] brcmfmac: add 802.11w management frame protection support
+
+Add full support for both AP and STA for management frame protection.
+
+Reviewed-by: Arend Van Spriel <arend.van@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <franky.lin@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -72,8 +72,13 @@
+ #define RSN_AKM_NONE 0 /* None (IBSS) */
+ #define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */
+ #define RSN_AKM_PSK 2 /* Pre-shared Key */
++#define RSN_AKM_SHA256_1X 5 /* SHA256, 802.1X */
++#define RSN_AKM_SHA256_PSK 6 /* SHA256, Pre-shared Key */
+ #define RSN_CAP_LEN 2 /* Length of RSN capabilities */
+-#define RSN_CAP_PTK_REPLAY_CNTR_MASK 0x000C
++#define RSN_CAP_PTK_REPLAY_CNTR_MASK (BIT(2) | BIT(3))
++#define RSN_CAP_MFPR_MASK BIT(6)
++#define RSN_CAP_MFPC_MASK BIT(7)
++#define RSN_PMKID_COUNT_LEN 2
+
+ #define VNDR_IE_CMD_LEN 4 /* length of the set command
+ * string :"add", "del" (+ NUL)
+@@ -211,12 +216,19 @@ static const struct ieee80211_regdomain
+ REG_RULE(5470-10, 5850+10, 80, 6, 20, 0), }
+ };
+
+-static const u32 __wl_cipher_suites[] = {
++/* Note: brcmf_cipher_suites is an array of int defining which cipher suites
++ * are supported. A pointer to this array and the number of entries is passed
++ * on to upper layers. AES_CMAC defines whether or not the driver supports MFP.
++ * So the cipher suite AES_CMAC has to be the last one in the array, and when
++ * device does not support MFP then the number of suites will be decreased by 1
++ */
++static const u32 brcmf_cipher_suites[] = {
+ WLAN_CIPHER_SUITE_WEP40,
+ WLAN_CIPHER_SUITE_WEP104,
+ WLAN_CIPHER_SUITE_TKIP,
+ WLAN_CIPHER_SUITE_CCMP,
+- WLAN_CIPHER_SUITE_AES_CMAC,
++ /* Keep as last entry: */
++ WLAN_CIPHER_SUITE_AES_CMAC
+ };
+
+ /* Vendor specific ie. id = 221, oui and type defines exact ie */
+@@ -1533,7 +1545,7 @@ static s32 brcmf_set_auth_type(struct ne
+
+ static s32
+ brcmf_set_wsec_mode(struct net_device *ndev,
+- struct cfg80211_connect_params *sme, bool mfp)
++ struct cfg80211_connect_params *sme)
+ {
+ struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
+ struct brcmf_cfg80211_security *sec;
+@@ -1592,10 +1604,7 @@ brcmf_set_wsec_mode(struct net_device *n
+ sme->privacy)
+ pval = AES_ENABLED;
+
+- if (mfp)
+- wsec = pval | gval | MFP_CAPABLE;
+- else
+- wsec = pval | gval;
++ wsec = pval | gval;
+ err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", wsec);
+ if (err) {
+ brcmf_err("error (%d)\n", err);
+@@ -1612,56 +1621,100 @@ brcmf_set_wsec_mode(struct net_device *n
+ static s32
+ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
+ {
+- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
+- struct brcmf_cfg80211_security *sec;
+- s32 val = 0;
+- s32 err = 0;
++ struct brcmf_if *ifp = netdev_priv(ndev);
++ s32 val;
++ s32 err;
++ const struct brcmf_tlv *rsn_ie;
++ const u8 *ie;
++ u32 ie_len;
++ u32 offset;
++ u16 rsn_cap;
++ u32 mfp;
++ u16 count;
+
+- if (sme->crypto.n_akm_suites) {
+- err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev),
+- "wpa_auth", &val);
+- if (err) {
+- brcmf_err("could not get wpa_auth (%d)\n", err);
+- return err;
++ if (!sme->crypto.n_akm_suites)
++ return 0;
++
++ err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), "wpa_auth", &val);
++ if (err) {
++ brcmf_err("could not get wpa_auth (%d)\n", err);
++ return err;
++ }
++ if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) {
++ switch (sme->crypto.akm_suites[0]) {
++ case WLAN_AKM_SUITE_8021X:
++ val = WPA_AUTH_UNSPECIFIED;
++ break;
++ case WLAN_AKM_SUITE_PSK:
++ val = WPA_AUTH_PSK;
++ break;
++ default:
++ brcmf_err("invalid cipher group (%d)\n",
++ sme->crypto.cipher_group);
++ return -EINVAL;
+ }
+- if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) {
+- switch (sme->crypto.akm_suites[0]) {
+- case WLAN_AKM_SUITE_8021X:
+- val = WPA_AUTH_UNSPECIFIED;
+- break;
+- case WLAN_AKM_SUITE_PSK:
+- val = WPA_AUTH_PSK;
+- break;
+- default:
+- brcmf_err("invalid cipher group (%d)\n",
+- sme->crypto.cipher_group);
+- return -EINVAL;
+- }
+- } else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) {
+- switch (sme->crypto.akm_suites[0]) {
+- case WLAN_AKM_SUITE_8021X:
+- val = WPA2_AUTH_UNSPECIFIED;
+- break;
+- case WLAN_AKM_SUITE_PSK:
+- val = WPA2_AUTH_PSK;
+- break;
+- default:
+- brcmf_err("invalid cipher group (%d)\n",
+- sme->crypto.cipher_group);
+- return -EINVAL;
+- }
++ } else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) {
++ switch (sme->crypto.akm_suites[0]) {
++ case WLAN_AKM_SUITE_8021X:
++ val = WPA2_AUTH_UNSPECIFIED;
++ break;
++ case WLAN_AKM_SUITE_8021X_SHA256:
++ val = WPA2_AUTH_1X_SHA256;
++ break;
++ case WLAN_AKM_SUITE_PSK_SHA256:
++ val = WPA2_AUTH_PSK_SHA256;
++ break;
++ case WLAN_AKM_SUITE_PSK:
++ val = WPA2_AUTH_PSK;
++ break;
++ default:
++ brcmf_err("invalid cipher group (%d)\n",
++ sme->crypto.cipher_group);
++ return -EINVAL;
+ }
++ }
+
+- brcmf_dbg(CONN, "setting wpa_auth to %d\n", val);
+- err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev),
+- "wpa_auth", val);
+- if (err) {
+- brcmf_err("could not set wpa_auth (%d)\n", err);
+- return err;
+- }
++ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP))
++ goto skip_mfp_config;
++ /* The MFP mode (1 or 2) needs to be determined, parse IEs. The
++ * IE will not be verified, just a quick search for MFP config
++ */
++ rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie, sme->ie_len,
++ WLAN_EID_RSN);
++ if (!rsn_ie)
++ goto skip_mfp_config;
++ ie = (const u8 *)rsn_ie;
++ ie_len = rsn_ie->len + TLV_HDR_LEN;
++ /* Skip unicast suite */
++ offset = TLV_HDR_LEN + WPA_IE_VERSION_LEN + WPA_IE_MIN_OUI_LEN;
++ if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len)
++ goto skip_mfp_config;
++ /* Skip multicast suite */
++ count = ie[offset] + (ie[offset + 1] << 8);
++ offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN);
++ if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len)
++ goto skip_mfp_config;
++ /* Skip auth key management suite(s) */
++ count = ie[offset] + (ie[offset + 1] << 8);
++ offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN);
++ if (offset + WPA_IE_SUITE_COUNT_LEN > ie_len)
++ goto skip_mfp_config;
++ /* Ready to read capabilities */
++ mfp = BRCMF_MFP_NONE;
++ rsn_cap = ie[offset] + (ie[offset + 1] << 8);
++ if (rsn_cap & RSN_CAP_MFPR_MASK)
++ mfp = BRCMF_MFP_REQUIRED;
++ else if (rsn_cap & RSN_CAP_MFPC_MASK)
++ mfp = BRCMF_MFP_CAPABLE;
++ brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "mfp", mfp);
++
++skip_mfp_config:
++ brcmf_dbg(CONN, "setting wpa_auth to %d\n", val);
++ err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val);
++ if (err) {
++ brcmf_err("could not set wpa_auth (%d)\n", err);
++ return err;
+ }
+- sec = &profile->sec;
+- sec->wpa_auth = sme->crypto.akm_suites[0];
+
+ return err;
+ }
+@@ -1827,7 +1880,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
+ goto done;
+ }
+
+- err = brcmf_set_wsec_mode(ndev, sme, sme->mfp == NL80211_MFP_REQUIRED);
++ err = brcmf_set_wsec_mode(ndev, sme);
+ if (err) {
+ brcmf_err("wl_set_set_cipher failed (%d)\n", err);
+ goto done;
+@@ -2077,10 +2130,12 @@ brcmf_cfg80211_del_key(struct wiphy *wip
+ u8 key_idx, bool pairwise, const u8 *mac_addr)
+ {
+ struct brcmf_if *ifp = netdev_priv(ndev);
+- struct brcmf_wsec_key key;
+- s32 err = 0;
++ struct brcmf_wsec_key *key;
++ s32 err;
+
+ brcmf_dbg(TRACE, "Enter\n");
++ brcmf_dbg(CONN, "key index (%d)\n", key_idx);
++
+ if (!check_vif_up(ifp->vif))
+ return -EIO;
+
+@@ -2089,16 +2144,19 @@ brcmf_cfg80211_del_key(struct wiphy *wip
+ return -EINVAL;
+ }
+
+- memset(&key, 0, sizeof(key));
++ key = &ifp->vif->profile.key[key_idx];
+
+- key.index = (u32)key_idx;
+- key.flags = BRCMF_PRIMARY_KEY;
+- key.algo = CRYPTO_ALGO_OFF;
++ if (key->algo == CRYPTO_ALGO_OFF) {
++ brcmf_dbg(CONN, "Ignore clearing of (never configured) key\n");
++ return -EINVAL;
++ }
+
+- brcmf_dbg(CONN, "key index (%d)\n", key_idx);
++ memset(key, 0, sizeof(*key));
++ key->index = (u32)key_idx;
++ key->flags = BRCMF_PRIMARY_KEY;
+
+- /* Set the new key/index */
+- err = send_key_to_dongle(ifp, &key);
++ /* Clear the key/index */
++ err = send_key_to_dongle(ifp, key);
+
+ brcmf_dbg(TRACE, "Exit\n");
+ return err;
+@@ -2106,8 +2164,8 @@ brcmf_cfg80211_del_key(struct wiphy *wip
+
+ static s32
+ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
+- u8 key_idx, bool pairwise, const u8 *mac_addr,
+- struct key_params *params)
++ u8 key_idx, bool pairwise, const u8 *mac_addr,
++ struct key_params *params)
+ {
+ struct brcmf_if *ifp = netdev_priv(ndev);
+ struct brcmf_wsec_key *key;
+@@ -2214,9 +2272,10 @@ done:
+ }
+
+ static s32
+-brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
+- u8 key_idx, bool pairwise, const u8 *mac_addr, void *cookie,
+- void (*callback) (void *cookie, struct key_params * params))
++brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, u8 key_idx,
++ bool pairwise, const u8 *mac_addr, void *cookie,
++ void (*callback)(void *cookie,
++ struct key_params *params))
+ {
+ struct key_params params;
+ struct brcmf_if *ifp = netdev_priv(ndev);
+@@ -2268,8 +2327,15 @@ done:
+
+ static s32
+ brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy,
+- struct net_device *ndev, u8 key_idx)
++ struct net_device *ndev, u8 key_idx)
+ {
++ struct brcmf_if *ifp = netdev_priv(ndev);
++
++ brcmf_dbg(TRACE, "Enter key_idx %d\n", key_idx);
++
++ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP))
++ return 0;
++
+ brcmf_dbg(INFO, "Not supported\n");
+
+ return -EOPNOTSUPP;
+@@ -3769,7 +3835,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
+ u32 auth = 0; /* d11 open authentication */
+ u16 count;
+ s32 err = 0;
+- s32 len = 0;
++ s32 len;
+ u32 i;
+ u32 wsec;
+ u32 pval = 0;
+@@ -3779,6 +3845,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
+ u8 *data;
+ u16 rsn_cap;
+ u32 wme_bss_disable;
++ u32 mfp;
+
+ brcmf_dbg(TRACE, "Enter\n");
+ if (wpa_ie == NULL)
+@@ -3893,19 +3960,53 @@ brcmf_configure_wpaie(struct brcmf_if *i
+ is_rsn_ie ? (wpa_auth |= WPA2_AUTH_PSK) :
+ (wpa_auth |= WPA_AUTH_PSK);
+ break;
++ case RSN_AKM_SHA256_PSK:
++ brcmf_dbg(TRACE, "RSN_AKM_MFP_PSK\n");
++ wpa_auth |= WPA2_AUTH_PSK_SHA256;
++ break;
++ case RSN_AKM_SHA256_1X:
++ brcmf_dbg(TRACE, "RSN_AKM_MFP_1X\n");
++ wpa_auth |= WPA2_AUTH_1X_SHA256;
++ break;
+ default:
+ brcmf_err("Ivalid key mgmt info\n");
+ }
+ offset++;
+ }
+
++ mfp = BRCMF_MFP_NONE;
+ if (is_rsn_ie) {
+ wme_bss_disable = 1;
+ if ((offset + RSN_CAP_LEN) <= len) {
+ rsn_cap = data[offset] + (data[offset + 1] << 8);
+ if (rsn_cap & RSN_CAP_PTK_REPLAY_CNTR_MASK)
+ wme_bss_disable = 0;
++ if (rsn_cap & RSN_CAP_MFPR_MASK) {
++ brcmf_dbg(TRACE, "MFP Required\n");
++ mfp = BRCMF_MFP_REQUIRED;
++ /* Firmware only supports mfp required in
++ * combination with WPA2_AUTH_PSK_SHA256 or
++ * WPA2_AUTH_1X_SHA256.
++ */
++ if (!(wpa_auth & (WPA2_AUTH_PSK_SHA256 |
++ WPA2_AUTH_1X_SHA256))) {
++ err = -EINVAL;
++ goto exit;
++ }
++ /* Firmware has requirement that WPA2_AUTH_PSK/
++ * WPA2_AUTH_UNSPECIFIED be set, if SHA256 OUI
++ * is to be included in the rsn ie.
++ */
++ if (wpa_auth & WPA2_AUTH_PSK_SHA256)
++ wpa_auth |= WPA2_AUTH_PSK;
++ else if (wpa_auth & WPA2_AUTH_1X_SHA256)
++ wpa_auth |= WPA2_AUTH_UNSPECIFIED;
++ } else if (rsn_cap & RSN_CAP_MFPC_MASK) {
++ brcmf_dbg(TRACE, "MFP Capable\n");
++ mfp = BRCMF_MFP_CAPABLE;
++ }
+ }
++ offset += RSN_CAP_LEN;
+ /* set wme_bss_disable to sync RSN Capabilities */
+ err = brcmf_fil_bsscfg_int_set(ifp, "wme_bss_disable",
+ wme_bss_disable);
+@@ -3913,6 +4014,21 @@ brcmf_configure_wpaie(struct brcmf_if *i
+ brcmf_err("wme_bss_disable error %d\n", err);
+ goto exit;
+ }
++
++ /* Skip PMKID cnt as it is know to be 0 for AP. */
++ offset += RSN_PMKID_COUNT_LEN;
++
++ /* See if there is BIP wpa suite left for MFP */
++ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP) &&
++ ((offset + WPA_IE_MIN_OUI_LEN) <= len)) {
++ err = brcmf_fil_bsscfg_data_set(ifp, "bip",
++ &data[offset],
++ WPA_IE_MIN_OUI_LEN);
++ if (err < 0) {
++ brcmf_err("bip error %d\n", err);
++ goto exit;
++ }
++ }
+ }
+ /* FOR WPS , set SES_OW_ENABLED */
+ wsec = (pval | gval | SES_OW_ENABLED);
+@@ -3929,6 +4045,16 @@ brcmf_configure_wpaie(struct brcmf_if *i
+ brcmf_err("wsec error %d\n", err);
+ goto exit;
+ }
++ /* Configure MFP, this needs to go after wsec otherwise the wsec command
++ * will overwrite the values set by MFP
++ */
++ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) {
++ err = brcmf_fil_bsscfg_int_set(ifp, "mfp", mfp);
++ if (err < 0) {
++ brcmf_err("mfp error %d\n", err);
++ goto exit;
++ }
++ }
+ /* set upper-layer auth */
+ err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_auth);
+ if (err < 0) {
+@@ -6149,8 +6275,10 @@ static int brcmf_setup_wiphy(struct wiph
+ wiphy->n_addresses = i;
+
+ wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+- wiphy->cipher_suites = __wl_cipher_suites;
+- wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites);
++ wiphy->cipher_suites = brcmf_cipher_suites;
++ wiphy->n_cipher_suites = ARRAY_SIZE(brcmf_cipher_suites);
++ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP))
++ wiphy->n_cipher_suites--;
+ wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT |
+ WIPHY_FLAG_OFFCHAN_TX |
+ WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+@@ -72,7 +72,7 @@
+
+ #define BRCMF_VNDR_IE_P2PAF_SHIFT 12
+
+-#define BRCMF_MAX_DEFAULT_KEYS 4
++#define BRCMF_MAX_DEFAULT_KEYS 6
+
+ /* beacon loss timeout defaults */
+ #define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON 2
+@@ -107,7 +107,6 @@ struct brcmf_cfg80211_security {
+ u32 auth_type;
+ u32 cipher_pairwise;
+ u32 cipher_group;
+- u32 wpa_auth;
+ };
+
+ /**
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+@@ -161,6 +161,7 @@ void brcmf_feat_attach(struct brcmf_pub
+ ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS);
+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode");
+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_TDLS, "tdls_enable");
++ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MFP, "mfp");
+
+ pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
+ err = brcmf_fil_iovar_data_get(ifp, "pfn_macaddr", &pfn_mac,
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+@@ -30,6 +30,7 @@
+ * WOWL_ND: WOWL net detect (PNO)
+ * WOWL_GTK: (WOWL) GTK rekeying offload
+ * WOWL_ARP_ND: ARP and Neighbor Discovery offload support during WOWL.
++ * MFP: 802.11w Management Frame Protection.
+ */
+ #define BRCMF_FEAT_LIST \
+ BRCMF_FEAT_DEF(MBSS) \
+@@ -42,7 +43,8 @@
+ BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \
+ BRCMF_FEAT_DEF(WOWL_ND) \
+ BRCMF_FEAT_DEF(WOWL_GTK) \
+- BRCMF_FEAT_DEF(WOWL_ARP_ND)
++ BRCMF_FEAT_DEF(WOWL_ARP_ND) \
++ BRCMF_FEAT_DEF(MFP)
+
+ /*
+ * Quirks:
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+@@ -142,6 +142,10 @@
+ #define BRCMF_RSN_KEK_LENGTH 16
+ #define BRCMF_RSN_REPLAY_LEN 8
+
++#define BRCMF_MFP_NONE 0
++#define BRCMF_MFP_CAPABLE 1
++#define BRCMF_MFP_REQUIRED 2
++
+ /* join preference types for join_pref iovar */
+ enum brcmf_join_pref_types {
+ BRCMF_JOIN_PREF_RSSI = 1,
+--- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
++++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
+@@ -236,6 +236,8 @@ static inline bool ac_bitmap_tst(u8 bitm
+ #define WPA2_AUTH_RESERVED3 0x0200
+ #define WPA2_AUTH_RESERVED4 0x0400
+ #define WPA2_AUTH_RESERVED5 0x0800
++#define WPA2_AUTH_1X_SHA256 0x1000 /* 1X with SHA256 key derivation */
++#define WPA2_AUTH_PSK_SHA256 0x8000 /* PSK with SHA256 key derivation */
+
+ #define DOT11_DEFAULT_RTS_LEN 2347
+ #define DOT11_DEFAULT_FRAG_LEN 2346
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -506,6 +506,21 @@ brcmf_cfg80211_update_proto_addr_mode(st
+@@ -527,6 +527,21 @@ brcmf_cfg80211_update_proto_addr_mode(st
ADDR_INDIRECT);
}
static int brcmf_cfg80211_request_ap_if(struct brcmf_if *ifp)
{
struct brcmf_mbss_ssid_le mbss_ssid_le;
-@@ -513,7 +528,7 @@ static int brcmf_cfg80211_request_ap_if(
+@@ -534,7 +549,7 @@ static int brcmf_cfg80211_request_ap_if(
int err;
memset(&mbss_ssid_le, 0, sizeof(mbss_ssid_le));
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -909,30 +909,6 @@ void brcmf_remove_interface(struct brcmf
+@@ -938,30 +938,6 @@ void brcmf_remove_interface(struct brcmf
brcmf_del_if(ifp->drvr, ifp->bsscfgidx);
}
static int brcmf_inetaddr_changed(struct notifier_block *nb,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
-@@ -214,7 +214,6 @@ int brcmf_net_attach(struct brcmf_if *if
+@@ -221,7 +221,6 @@ int brcmf_net_attach(struct brcmf_if *if
struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
bool is_p2pdev, char *name, u8 *mac_addr);
void brcmf_remove_interface(struct brcmf_if *ifp);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2690,7 +2690,7 @@ static s32 brcmf_inform_single_bss(struc
+@@ -2689,7 +2689,7 @@ static s32 brcmf_inform_single_bss(struc
if (!bi->ctl_ch) {
ch.chspec = le16_to_cpu(bi->chanspec);
cfg->d11inf.decchspec(&ch);
}
channel = bi->ctl_ch;
-@@ -2808,7 +2808,7 @@ static s32 brcmf_inform_ibss(struct brcm
+@@ -2807,7 +2807,7 @@ static s32 brcmf_inform_ibss(struct brcm
else
band = wiphy->bands[IEEE80211_BAND_5GHZ];
cfg->channel = freq;
notify_channel = ieee80211_get_channel(wiphy, freq);
-@@ -2818,7 +2818,7 @@ static s32 brcmf_inform_ibss(struct brcm
+@@ -2817,7 +2817,7 @@ static s32 brcmf_inform_ibss(struct brcm
notify_ielen = le32_to_cpu(bi->ie_length);
notify_signal = (s16)le16_to_cpu(bi->RSSI) * 100;
brcmf_dbg(CONN, "capability: %X\n", notify_capability);
brcmf_dbg(CONN, "beacon interval: %d\n", notify_interval);
brcmf_dbg(CONN, "signal: %d\n", notify_signal);
-@@ -5132,7 +5132,7 @@ brcmf_bss_roaming_done(struct brcmf_cfg8
+@@ -5234,7 +5234,7 @@ brcmf_bss_roaming_done(struct brcmf_cfg8
else
band = wiphy->bands[IEEE80211_BAND_5GHZ];
notify_channel = ieee80211_get_channel(wiphy, freq);
done:
-@@ -5654,14 +5654,15 @@ static int brcmf_construct_chaninfo(stru
+@@ -5756,14 +5756,15 @@ static int brcmf_construct_chaninfo(stru
channel = band->channels;
index = band->n_channels;
for (j = 0; j < band->n_channels; j++) {
/* assuming the chanspecs order is HT20,
* HT40 upper, HT40 lower, and VHT80.
-@@ -5763,7 +5764,7 @@ static int brcmf_enable_bw40_2g(struct b
+@@ -5865,7 +5866,7 @@ static int brcmf_enable_bw40_2g(struct b
if (WARN_ON(ch.bw != BRCMU_CHAN_BW_40))
continue;
for (j = 0; j < band->n_channels; j++) {
}
afx_hdl->peer_chan = bi->ctl_ch;
brcmf_dbg(TRACE, "ACTION FRAME SCAN : Peer %pM found, channel : %d\n",
-@@ -1380,7 +1380,7 @@ int brcmf_p2p_notify_action_frame_rx(str
+@@ -1385,7 +1385,7 @@ int brcmf_p2p_notify_action_frame_rx(str
if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
&p2p->status) &&
(ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) {
brcmf_dbg(INFO, "GON request: Peer found, channel=%d\n",
afx_hdl->peer_chan);
complete(&afx_hdl->act_frm_scan);
-@@ -1423,7 +1423,7 @@ int brcmf_p2p_notify_action_frame_rx(str
+@@ -1428,7 +1428,7 @@ int brcmf_p2p_notify_action_frame_rx(str
memcpy(&mgmt_frame->u, frame, mgmt_frame_len);
mgmt_frame_len += offsetof(struct ieee80211_mgmt, u);
ch.band == BRCMU_CHAN_BAND_2G ?
IEEE80211_BAND_2GHZ :
IEEE80211_BAND_5GHZ);
-@@ -1863,7 +1863,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
+@@ -1873,7 +1873,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status) &&
(ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) {
brcmf_dbg(INFO, "PROBE REQUEST: Peer found, channel=%d\n",
afx_hdl->peer_chan);
complete(&afx_hdl->act_frm_scan);
-@@ -1888,7 +1888,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
+@@ -1898,7 +1898,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
mgmt_frame = (u8 *)(rxframe + 1);
mgmt_frame_len = e->datalen - sizeof(*rxframe);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -4769,6 +4769,68 @@ exit:
+@@ -4846,6 +4846,68 @@ exit:
return err;
}
static int brcmf_cfg80211_crit_proto_start(struct wiphy *wiphy,
struct wireless_dev *wdev,
enum nl80211_crit_proto_id proto,
-@@ -4906,6 +4968,7 @@ static struct cfg80211_ops wl_cfg80211_o
+@@ -5008,6 +5070,7 @@ static struct cfg80211_ops brcmf_cfg8021
.mgmt_tx = brcmf_cfg80211_mgmt_tx,
.remain_on_channel = brcmf_p2p_remain_on_channel,
.cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -649,20 +649,24 @@ static struct wireless_dev *brcmf_cfg802
+@@ -670,20 +670,24 @@ static struct wireless_dev *brcmf_cfg802
return ERR_PTR(-EOPNOTSUPP);
case NL80211_IFTYPE_AP:
wdev = brcmf_ap_add_vif(wiphy, name, flags, params);
static void brcmf_scan_config_mpc(struct brcmf_if *ifp, int mpc)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-@@ -2020,8 +2020,6 @@ static int brcmf_p2p_request_p2p_if(stru
+@@ -2030,8 +2030,6 @@ static int brcmf_p2p_request_p2p_if(stru
err = brcmf_fil_iovar_data_set(ifp, "p2p_ifadd", &if_request,
sizeof(if_request));
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -4304,7 +4304,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+@@ -4381,7 +4381,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
struct brcmf_join_params join_params;
enum nl80211_iftype dev_role;
struct brcmf_fil_bss_enable_le bss_enable;
bool mbss;
int is_11d;
-@@ -4380,16 +4380,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+@@ -4457,16 +4457,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon);
if (is_11d != ifp->vif->is_11d) {
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY,
is_11d);
-@@ -4437,6 +4429,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+@@ -4514,6 +4506,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
err = -EINVAL;
goto exit;
}
if (dev_role == NL80211_IFTYPE_AP) {
if ((brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) && (!mbss))
brcmf_fil_iovar_int_set(ifp, "mbss", 1);
-@@ -4446,6 +4440,17 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+@@ -4523,6 +4517,17 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
brcmf_err("setting AP mode failed %d\n", err);
goto exit;
}
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
if (err < 0) {
brcmf_err("BRCMF_C_UP error (%d)\n", err);
-@@ -4467,7 +4472,13 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+@@ -4544,7 +4549,13 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
goto exit;
}
brcmf_dbg(TRACE, "AP mode configuration complete\n");
err = brcmf_fil_bsscfg_data_set(ifp, "ssid", &ssid_le,
sizeof(ssid_le));
if (err < 0) {
-@@ -4484,7 +4495,10 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+@@ -4561,7 +4572,10 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
}
brcmf_dbg(TRACE, "GO mode configuration complete\n");
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -5269,7 +5269,6 @@ brcmf_notify_connect_status_ap(struct br
+@@ -5371,7 +5371,6 @@ brcmf_notify_connect_status_ap(struct br
struct net_device *ndev,
const struct brcmf_event_msg *e, void *data)
{
static int generation;
u32 event = e->event_code;
u32 reason = e->reason;
-@@ -5280,8 +5279,6 @@ brcmf_notify_connect_status_ap(struct br
+@@ -5382,8 +5381,6 @@ brcmf_notify_connect_status_ap(struct br
ndev != cfg_to_ndev(cfg)) {
brcmf_dbg(CONN, "AP mode link down\n");
complete(&cfg->vif_disabled);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -566,7 +566,7 @@ struct wireless_dev *brcmf_ap_add_vif(st
+@@ -587,7 +587,7 @@ struct wireless_dev *brcmf_ap_add_vif(st
brcmf_dbg(INFO, "Adding vif \"%s\"\n", name);
if (IS_ERR(vif))
return (struct wireless_dev *)vif;
-@@ -4995,8 +4995,7 @@ static struct cfg80211_ops wl_cfg80211_o
+@@ -5097,8 +5097,7 @@ static struct cfg80211_ops brcmf_cfg8021
};
struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg,
{
struct brcmf_cfg80211_vif *vif_walk;
struct brcmf_cfg80211_vif *vif;
-@@ -5011,8 +5010,6 @@ struct brcmf_cfg80211_vif *brcmf_alloc_v
+@@ -5113,8 +5112,6 @@ struct brcmf_cfg80211_vif *brcmf_alloc_v
vif->wdev.wiphy = cfg->wiphy;
vif->wdev.iftype = type;
brcmf_init_prof(&vif->profile);
if (type == NL80211_IFTYPE_AP) {
-@@ -6582,7 +6579,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
+@@ -6753,7 +6750,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
init_vif_event(&cfg->vif_event);
INIT_LIST_HEAD(&cfg->vif_list);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
-@@ -165,7 +165,6 @@ struct vif_saved_ie {
+@@ -167,7 +167,6 @@ struct vif_saved_ie {
* @wdev: wireless device.
* @profile: profile information.
* @sme_state: SME state using enum brcmf_vif_status bits.
* @list: linked list.
* @mgmt_rx_reg: registered rx mgmt frame types.
* @mbss: Multiple BSS type, set if not first AP (not relevant for P2P).
-@@ -175,7 +174,6 @@ struct brcmf_cfg80211_vif {
+@@ -177,7 +176,6 @@ struct brcmf_cfg80211_vif {
struct wireless_dev wdev;
struct brcmf_cfg80211_profile profile;
unsigned long sme_state;
struct vif_saved_ie saved_ie;
struct list_head list;
u16 mgmt_rx_reg;
-@@ -386,8 +384,7 @@ s32 brcmf_cfg80211_down(struct net_devic
+@@ -388,8 +386,7 @@ s32 brcmf_cfg80211_down(struct net_devic
enum nl80211_iftype brcmf_cfg80211_get_iftype(struct brcmf_if *ifp);
struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg,
s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-@@ -2064,8 +2064,7 @@ static struct wireless_dev *brcmf_p2p_cr
+@@ -2074,8 +2074,7 @@ static struct wireless_dev *brcmf_p2p_cr
if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
return ERR_PTR(-ENOSPC);
if (IS_ERR(p2p_vif)) {
brcmf_err("could not create discovery vif\n");
return (struct wireless_dev *)p2p_vif;
-@@ -2165,7 +2164,7 @@ struct wireless_dev *brcmf_p2p_add_vif(s
+@@ -2175,7 +2174,7 @@ struct wireless_dev *brcmf_p2p_add_vif(s
return ERR_PTR(-EOPNOTSUPP);
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -6105,29 +6105,15 @@ static int brcmf_setup_ifmodes(struct wi
+@@ -6207,29 +6207,15 @@ static int brcmf_setup_ifmodes(struct wi
if (!combo)
goto err;
c0_limits[i].max = 1;
c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
if (p2p) {
-@@ -6145,6 +6131,7 @@ static int brcmf_setup_ifmodes(struct wi
+@@ -6247,6 +6233,7 @@ static int brcmf_setup_ifmodes(struct wi
c0_limits[i].max = 1;
c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
}
combo[c].max_interfaces = i;
combo[c].n_limits = i;
combo[c].limits = c0_limits;
-@@ -6152,7 +6139,9 @@ static int brcmf_setup_ifmodes(struct wi
+@@ -6254,7 +6241,9 @@ static int brcmf_setup_ifmodes(struct wi
if (p2p) {
c++;
i = 0;
p2p_limits[i].max = 1;
p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
p2p_limits[i].max = 1;
-@@ -6161,6 +6150,7 @@ static int brcmf_setup_ifmodes(struct wi
+@@ -6263,6 +6252,7 @@ static int brcmf_setup_ifmodes(struct wi
p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
p2p_limits[i].max = 1;
p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
combo[c].max_interfaces = i;
combo[c].n_limits = i;
combo[c].limits = p2p_limits;
-@@ -6168,14 +6158,19 @@ static int brcmf_setup_ifmodes(struct wi
+@@ -6270,14 +6260,19 @@ static int brcmf_setup_ifmodes(struct wi
if (mbss) {
c++;
+From b50ddfa8530e9b5f52e873fdd6ff04f327a88799 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 17 Jun 2016 12:29:21 +0200
Subject: [PATCH] brcmfmac: fix lockup when removing P2P interface after event
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
+ .../wireless/broadcom/brcm80211/brcmfmac/core.c | 29 +++++++++++++---------
+ .../wireless/broadcom/brcm80211/brcmfmac/core.h | 2 +-
+ .../wireless/broadcom/brcm80211/brcmfmac/fweh.c | 2 +-
+ .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 4 +--
+ 4 files changed, 21 insertions(+), 16 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -705,12 +705,16 @@ fail:
+@@ -733,12 +733,16 @@ fail:
return -EBADE;
}
}
void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on)
-@@ -808,7 +812,7 @@ struct brcmf_if *brcmf_add_if(struct brc
+@@ -836,7 +840,7 @@ struct brcmf_if *brcmf_add_if(struct brc
brcmf_err("ERROR: netdev:%s already exists\n",
ifp->ndev->name);
netif_stop_queue(ifp->ndev);
drvr->iflist[bsscfgidx] = NULL;
} else {
brcmf_dbg(INFO, "netdev:%s ignore IF event\n",
-@@ -856,7 +860,8 @@ struct brcmf_if *brcmf_add_if(struct brc
+@@ -884,7 +888,8 @@ struct brcmf_if *brcmf_add_if(struct brc
return ifp;
}
{
struct brcmf_if *ifp;
-@@ -885,7 +890,7 @@ static void brcmf_del_if(struct brcmf_pu
- cancel_work_sync(&ifp->setmacaddr_work);
+@@ -914,7 +919,7 @@ static void brcmf_del_if(struct brcmf_pu
cancel_work_sync(&ifp->multicast_work);
+ cancel_work_sync(&ifp->ndoffload_work);
}
- brcmf_net_detach(ifp->ndev);
+ brcmf_net_detach(ifp->ndev, rtnl_locked);
} else {
/* Only p2p device interfaces which get dynamically created
* end up here. In this case the p2p module should be informed
-@@ -899,14 +904,14 @@ static void brcmf_del_if(struct brcmf_pu
+@@ -928,14 +933,14 @@ static void brcmf_del_if(struct brcmf_pu
}
}
}
#ifdef CONFIG_INET
-@@ -1154,9 +1159,9 @@ fail:
- brcmf_fws_deinit(drvr);
- }
- if (ifp)
-- brcmf_net_detach(ifp->ndev);
-+ brcmf_net_detach(ifp->ndev, false);
- if (p2p_ifp)
-- brcmf_net_detach(p2p_ifp->ndev);
-+ brcmf_net_detach(p2p_ifp->ndev, false);
- drvr->iflist[0] = NULL;
- drvr->iflist[1] = NULL;
- if (brcmf_ignoring_probe_fail(drvr))
-@@ -1222,7 +1227,7 @@ void brcmf_detach(struct device *dev)
+@@ -1242,9 +1247,9 @@ fail:
+ brcmf_fws_deinit(drvr);
+ }
+ if (ifp)
+- brcmf_net_detach(ifp->ndev);
++ brcmf_net_detach(ifp->ndev, false);
+ if (p2p_ifp)
+- brcmf_net_detach(p2p_ifp->ndev);
++ brcmf_net_detach(p2p_ifp->ndev, false);
+ drvr->iflist[0] = NULL;
+ drvr->iflist[1] = NULL;
+ if (drvr->settings->ignore_probe_fail)
+@@ -1313,7 +1318,7 @@ void brcmf_detach(struct device *dev)
/* make sure primary interface removed last */
for (i = BRCMF_MAX_IFS-1; i > -1; i--)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
-@@ -213,7 +213,7 @@ struct brcmf_if *brcmf_get_ifp(struct br
+@@ -220,7 +220,7 @@ struct brcmf_if *brcmf_get_ifp(struct br
int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
bool is_p2pdev, char *name, u8 *mac_addr);
void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
-@@ -226,7 +226,7 @@ static void brcmf_fweh_handle_if_event(s
+@@ -183,7 +183,7 @@ static void brcmf_fweh_handle_if_event(s
err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
if (ifp && ifevent->action == BRCMF_E_IF_DEL)
/**
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-@@ -2279,7 +2279,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
+@@ -2289,7 +2289,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
err = 0;
}
if (err)
brcmf_cfg80211_arm_vif_event(cfg, NULL);
if (vif->wdev.iftype != NL80211_IFTYPE_P2P_DEVICE)
-@@ -2385,7 +2385,7 @@ void brcmf_p2p_detach(struct brcmf_p2p_i
+@@ -2395,7 +2395,7 @@ void brcmf_p2p_detach(struct brcmf_p2p_i
if (vif != NULL) {
brcmf_p2p_cancel_remain_on_channel(vif->ifp);
brcmf_p2p_deinit_discovery(p2p);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -795,7 +795,7 @@ fail:
+@@ -823,7 +823,7 @@ fail:
}
struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
struct net_device *ndev;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
-@@ -212,7 +212,7 @@ char *brcmf_ifname(struct brcmf_if *ifp)
+@@ -219,7 +219,7 @@ char *brcmf_ifname(struct brcmf_if *ifp)
struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-@@ -2253,6 +2253,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
+@@ -2263,6 +2263,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
return 0;
brcmf_p2p_cancel_remain_on_channel(vif->ifp);
brcmf_p2p_deinit_discovery(p2p);
#include "core.h"
#include "debug.h"
#include "tracepoint.h"
-@@ -225,8 +226,13 @@ static void brcmf_fweh_handle_if_event(s
+@@ -182,8 +183,13 @@ static void brcmf_fweh_handle_if_event(s
err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
/**
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-@@ -2280,8 +2280,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
+@@ -2290,8 +2290,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
else
err = 0;
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -750,12 +750,48 @@ s32 brcmf_notify_escan_complete(struct b
+@@ -771,12 +771,48 @@ s32 brcmf_notify_escan_complete(struct b
return err;
}
/* vif event pending in firmware */
if (brcmf_cfg80211_vif_event_armed(cfg))
return -EBUSY;
-@@ -772,12 +808,13 @@ int brcmf_cfg80211_del_iface(struct wiph
+@@ -793,12 +829,13 @@ int brcmf_cfg80211_del_iface(struct wiph
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_STATION:
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -4508,6 +4508,15 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
+@@ -4585,6 +4585,15 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
brcmf_err("SET SSID error (%d)\n", err);
goto exit;
}
brcmf_dbg(TRACE, "AP mode configuration complete\n");
} else if (dev_role == NL80211_IFTYPE_P2P_GO) {
err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
-@@ -4566,6 +4575,10 @@ static int brcmf_cfg80211_stop_ap(struct
+@@ -4643,6 +4652,10 @@ static int brcmf_cfg80211_stop_ap(struct
return err;
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1313,6 +1313,7 @@ static int __init brcmfmac_module_init(v
- #endif
+@@ -1398,6 +1398,7 @@ int __init brcmf_core_init(void)
+ {
if (!schedule_work(&brcmf_driver_work))
return -EBUSY;
+ flush_work(&brcmf_driver_work);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -630,9 +630,37 @@ static struct wireless_dev *brcmf_cfg802
+@@ -651,9 +651,37 @@ static struct wireless_dev *brcmf_cfg802
u32 *flags,
struct vif_params *params)
{
projects / openwrt / svn-archive / archive.git / commitdiff