#include <plat/cpu.h>
/* OMAP HSMMC Host Controller Registers */
-#define OMAP_HSMMC_SYSCONFIG 0x0010
#define OMAP_HSMMC_SYSSTATUS 0x0014
#define OMAP_HSMMC_CON 0x002C
#define OMAP_HSMMC_BLK 0x0104
if (host->context_loss == context_loss)
return 1;
- /* Wait for hardware reset */
- timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
- while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE
- && time_before(jiffies, timeout))
- ;
-
- /* Do software reset */
- OMAP_HSMMC_WRITE(host->base, SYSCONFIG, SOFTRESET);
- timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
- while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE
- && time_before(jiffies, timeout))
- ;
-
- OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
- OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
+ if (!OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE)
+ return 1;
if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
if (host->power_mode != MMC_POWER_OFF &&
value = OMAP_HSMMC_READ(host->base, CAPA);
OMAP_HSMMC_WRITE(host->base, CAPA, value | capa);
- /* Set the controller to AUTO IDLE mode */
- value = OMAP_HSMMC_READ(host->base, SYSCONFIG);
- OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE);
-
/* Set SD bus power bit */
set_sd_bus_power(host);
}
pm_runtime_get_sync(host->dev);
- seq_printf(s, "SYSCONFIG:\t0x%08x\n",
- OMAP_HSMMC_READ(host->base, SYSCONFIG));
seq_printf(s, "CON:\t\t0x%08x\n",
OMAP_HSMMC_READ(host->base, CON));
seq_printf(s, "HCTL:\t\t0x%08x\n",