+++ /dev/null
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated.
- * Aneesh V <aneesh@ti.com>
- * Steve Sakoman <steve@sakoman.com>
- *
- * TI OMAP4 common configuration settings
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_OMAP4_COMMON_H
-#define __CONFIG_OMAP4_COMMON_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP44XX 1 /* which is a 44XX */
-#define CONFIG_OMAP4430 1 /* which is in a 4430 */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-#define CONFIG_SYS_THUMB_BUILD
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-#define CONFIG_SYS_L2_PL310 1
-#define CONFIG_SYS_PL310_BASE 0x48242000
-#endif
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/* Get CPU defs */
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE GPT2_BASE
-
-/*
- * Total Size Environment - 128k
- */
-#define CONFIG_ENV_SIZE (128 << 10)
-
-/*
- * For the DDR timing information we can either dynamically determine
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method. Default to the static timing infomation.
- */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
-#include <configs/ti_armv7_common.h>
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK 48000000
-#define CONFIG_CONS_INDEX 3
-#define CONFIG_SYS_NS16550_COM3 UART3_BASE
-
-/* TWL6030 */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_TWL6030_POWER 1
-#endif
-
-/* USB */
-#define CONFIG_MUSB_UDC 1
-#define CONFIG_USB_OMAP3 1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-/* Per-Soc commands */
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-/*
- * Environment setup
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x82000000\0" \
- "console=ttyO2,115200n8\0" \
- "fdt_high=0xffffffff\0" \
- "fdtaddr=0x80f80000\0" \
- "fdtfile=undefined\0" \
- "bootpart=0:2\0" \
- "bootdir=/boot\0" \
- "bootfile=zImage\0" \
- "usbtty=cdc_acm\0" \
- "vram=16M\0" \
- "mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 rw\0" \
- "mmcrootfstype=ext3 rootwait\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "vram=${vram} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
- "source ${loadaddr}\0" \
- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
- "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
- "env import -t ${loadaddr} ${filesize}\0" \
- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "mmcboot=echo Booting from mmc${mmcdev} ...; " \
- "run mmcargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
- "findfdt="\
- "if test $board_name = sdp4430; then " \
- "setenv fdtfile omap4-sdp.dtb; fi; " \
- "if test $board_name = panda; then " \
- "setenv fdtfile omap4-panda.dtb; fi;" \
- "if test $board_name = panda-a4; then " \
- "setenv fdtfile omap4-panda-a4.dtb; fi;" \
- "if test $board_name = panda-es; then " \
- "setenv fdtfile omap4-panda-es.dtb; fi;" \
- "if test $fdtfile = undefined; then " \
- "echo WARNING: Could not determine device tree to use; fi; \0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadbootenv; then " \
- "run importbootenv; " \
- "fi;" \
- "if test -n ${uenvcmd}; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "fi;" \
- "if run loadimage; then " \
- "run loadfdt;" \
- "run mmcboot; " \
- "fi; " \
- "fi"
-
-/*
- * Defines for SPL
- * It is known that this will break HS devices. Since the current size of
- * SPL is overlapped with public stack and breaking non HS devices to boot.
- * So moving TEXT_BASE down to non-HS limit.
- */
-#define CONFIG_SPL_TEXT_BASE 0x40300000
-#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SPL_DISPLAY_PRINT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
-
-#endif /* __CONFIG_OMAP4_COMMON_H */
* Steve Sakoman <steve@sakoman.com>
*
* Configuration settings for the TI OMAP4 Panda board.
- * See omap4_common.h for OMAP4 common part
+ * See ti_omap4_common.h for OMAP4 common part
*
* SPDX-License-Identifier: GPL-2.0+
*/
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
-#include <configs/omap4_common.h>
+#include <configs/ti_omap4_common.h>
#define CONFIG_CMD_NET
/* GPIO */
* Steve Sakoman <steve@sakoman.com>
*
* Configuration settings for the TI SDP4430 board.
- * See omap4_common.h for OMAP4 common part
+ * See ti_omap4_common.h for OMAP4 common part
*
* SPDX-License-Identifier: GPL-2.0+
*/
#define CONFIG_4430SDP 1 /* working with SDP */
#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_4430SDP
-#include <configs/omap4_common.h>
+#include <configs/ti_omap4_common.h>
/* Battery Charger */
#ifndef CONFIG_SPL_BUILD
--- /dev/null
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated.
+ * Aneesh V <aneesh@ti.com>
+ * Steve Sakoman <steve@sakoman.com>
+ *
+ * TI OMAP4 common configuration settings
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_TI_OMAP4_COMMON_H
+#define __CONFIG_TI_OMAP4_COMMON_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_OMAP44XX 1 /* which is a 44XX */
+#define CONFIG_OMAP4430 1 /* which is in a 4430 */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO 1
+#define CONFIG_DISPLAY_BOARDINFO 1
+
+#define CONFIG_SYS_THUMB_BUILD
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#define CONFIG_SYS_L2_PL310 1
+#define CONFIG_SYS_PL310_BASE 0x48242000
+#endif
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+/* Get CPU defs */
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap.h>
+
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE GPT2_BASE
+
+/*
+ * Total Size Environment - 128k
+ */
+#define CONFIG_ENV_SIZE (128 << 10)
+
+/*
+ * For the DDR timing information we can either dynamically determine
+ * the timings to use or use pre-determined timings (based on using the
+ * dynamic method. Default to the static timing infomation.
+ */
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+#include <configs/ti_armv7_common.h>
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK 48000000
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 UART3_BASE
+
+/* TWL6030 */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_TWL6030_POWER 1
+#endif
+
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
+/* Per-Soc commands */
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+/*
+ * Environment setup
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "console=ttyO2,115200n8\0" \
+ "fdt_high=0xffffffff\0" \
+ "fdtaddr=0x80f80000\0" \
+ "fdtfile=undefined\0" \
+ "bootpart=0:2\0" \
+ "bootdir=/boot\0" \
+ "bootfile=zImage\0" \
+ "usbtty=cdc_acm\0" \
+ "vram=16M\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "vram=${vram} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+ "source ${loadaddr}\0" \
+ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+ "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+ "env import -t ${loadaddr} ${filesize}\0" \
+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "mmcboot=echo Booting from mmc${mmcdev} ...; " \
+ "run mmcargs; " \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
+ "findfdt="\
+ "if test $board_name = sdp4430; then " \
+ "setenv fdtfile omap4-sdp.dtb; fi; " \
+ "if test $board_name = panda; then " \
+ "setenv fdtfile omap4-panda.dtb; fi;" \
+ "if test $board_name = panda-a4; then " \
+ "setenv fdtfile omap4-panda-a4.dtb; fi;" \
+ "if test $board_name = panda-es; then " \
+ "setenv fdtfile omap4-panda-es.dtb; fi;" \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0" \
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadbootenv; then " \
+ "run importbootenv; " \
+ "fi;" \
+ "if test -n ${uenvcmd}; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "fi;" \
+ "if run loadimage; then " \
+ "run loadfdt;" \
+ "run mmcboot; " \
+ "fi; " \
+ "fi"
+
+/*
+ * Defines for SPL
+ * It is known that this will break HS devices. Since the current size of
+ * SPL is overlapped with public stack and breaking non HS devices to boot.
+ * So moving TEXT_BASE down to non-HS limit.
+ */
+#define CONFIG_SPL_TEXT_BASE 0x40300000
+#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_DISPLAY_PRINT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#endif /* __CONFIG_TI_OMAP4_COMMON_H */
projects / project / bcm63xx / u-boot.git / commitdiff