bcm53xx: add D-Link DIR-885L DT patch

We don't build image for this device yet.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48519

diff --git a/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch
new file mode 100644 (file)
index 0000000..c606e93
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch
@@ -0,0 +1,145 @@
+From 3ea03a9d512ca19d59315492230e954a1653ff6e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 26 Jan 2016 23:35:16 +0100
+Subject: [PATCH] ARM: BCM5301X: Add DT for D-Link DIR-885L
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's device based on BCM47094 which is quite similar to BCM4709 except
+for higher CPU frequency. This device has 2 flash memories, it boots
+from serial one and stores firmware on NAND. Other than that we define
+standard stuff like LEDs, buttons and UART.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                    |   1 +
+ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 111 ++++++++++++++++++++++++++
+ 2 files changed, 112 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+       bcm4709-buffalo-wxr-1900dhp.dtb \
+       bcm4709-netgear-r7000.dtb \
+       bcm4709-netgear-r8000.dtb \
++      bcm47094-dlink-dir-885l.dtb \
+       bcm94708.dtb \
+       bcm94709.dtb \
+       bcm953012k.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -0,0 +1,111 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for D-Link DIR-885L
++ *
++ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++      compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
++      model = "D-Link DIR-885L";
++
++      chosen {
++              bootargs = "console=ttyS0,115200";
++      };
++
++      memory {
++              reg = <0x00000000 0x08000000>;
++      };
++
++      nand: nand@18028000 {
++              nandcs@0 {
++                      partition@0 {
++                              label = "firmware";
++                              reg = <0x00000000 0x08000000>;
++                      };
++              };
++      };
++
++      leds {
++              compatible = "gpio-leds";
++
++              power-white {
++                      label = "bcm53xx:white:power";
++                      gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++                      linux,default-trigger = "default-on";
++              };
++
++              wan-white {
++                      label = "bcm53xx:white:wan";
++                      gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++                      linux,default-trigger = "default-off";
++              };
++
++              power-amber {
++                      label = "bcm53xx:amber:power";
++                      gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
++                      linux,default-trigger = "default-off";
++              };
++
++              wan-amber {
++                      label = "bcm53xx:amber:wan";
++                      gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
++                      linux,default-trigger = "default-off";
++              };
++
++              usb3-white {
++                      label = "bcm53xx:white:usb3";
++                      gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++                      linux,default-trigger = "default-off";
++              };
++
++              2ghz {
++                      label = "bcm53xx:white:2ghz";
++                      gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++                      linux,default-trigger = "default-off";
++              };
++
++              5ghz {
++                      label = "bcm53xx:white:5ghz";
++                      gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++                      linux,default-trigger = "default-off";
++              };
++      };
++
++      gpio-keys {
++              compatible = "gpio-keys";
++              #address-cells = <1>;
++              #size-cells = <0>;
++
++              wps {
++                      label = "WPS";
++                      linux,code = <KEY_WPS_BUTTON>;
++                      gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++              };
++
++              /* Switch: router / extender */
++              extender {
++                      label = "Extender";
++                      linux,code = <BTN_0>;
++                      gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++              };
++
++              restart {
++                      label = "Reset";
++                      linux,code = <KEY_RESTART>;
++                      gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++              };
++      };
++};
++
++&uart0 {
++      status = "okay";
++      clock-frequency = <125000000>;
++};