arm64: dts: allwinner: h6: move MMC pinctrl to dtsi

There is only one pinmuxing available for each MMC controller.

Move the pinctrl to the SOC

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index b2526dac2fcfab3c7473b6745a68ecff2b0ee22f..62e27948a3faed9d7ae7f022fedf2b1cd2cd6eb5 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -56,8 +56,6 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_cldo1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
        bus-width = <4>;

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index bdb8470fc8dc96925007922a0a6d8a1dd663d886..4802902e128f980d58baf7bbdd93094230840b30 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -104,8 +104,6 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_cldo1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
        bus-width = <4>;
@@ -113,8 +111,6 @@
 };
 
 &mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_pins>;
        vmmc-supply = <&reg_cldo1>;
        vqmmc-supply = <&reg_bldo2>;
        non-removable;

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 3e4bb0b0de6930fc240c457cacb6b9be073d2ba2..e0dc4a05c1ba0273e2c3fced95c063e38f4f0d17 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -278,6 +278,8 @@
                        resets = <&ccu RST_BUS_MMC0>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -306,6 +308,8 @@
                        resets = <&ccu RST_BUS_MMC2>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc2_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;