mac80211: backport brcmfmac fixes for WARNING and BCM4360 init

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 49004

diff --git a/package/kernel/mac80211/patches/344-0008-brcmfmac-use-device-memsize-config-from-fw-if-define.patch b/package/kernel/mac80211/patches/344-0008-brcmfmac-use-device-memsize-config-from-fw-if-define.patch
new file mode 100644 (file)
index 0000000..3de0f64
--- /dev/null
+++ b/package/kernel/mac80211/patches/344-0008-brcmfmac-use-device-memsize-config-from-fw-if-define.patch
@@ -0,0 +1,73 @@
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:26:57 +0100
+Subject: [PATCH] brcmfmac: use device memsize config from fw if defined
+
+Newer type pcie devices have memory which get shared between fw and
+hw. The division of this memory is done firmware compile time. As a
+result the ramsize as used by driver needs to be adjusted for this.
+This is done by reading the memory size from the firmware.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+@@ -207,6 +207,10 @@ static struct brcmf_firmware_mapping brc
+ #define BRCMF_PCIE_CFGREG_REG_BAR3_CONFIG     0x4F4
+ #define BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB 3
+ 
++/* Magic number at a magic location to find RAM size */
++#define BRCMF_RAMSIZE_MAGIC                   0x534d4152      /* SMAR */
++#define BRCMF_RAMSIZE_OFFSET                  0x6c
++
+ 
+ struct brcmf_pcie_console {
+       u32 base_addr;
+@@ -1412,6 +1416,28 @@ static const struct brcmf_bus_ops brcmf_
+ };
+ 
+ 
++static void
++brcmf_pcie_adjust_ramsize(struct brcmf_pciedev_info *devinfo, u8 *data,
++                        u32 data_len)
++{
++      __le32 *field;
++      u32 newsize;
++
++      if (data_len < BRCMF_RAMSIZE_OFFSET + 8)
++              return;
++
++      field = (__le32 *)&data[BRCMF_RAMSIZE_OFFSET];
++      if (le32_to_cpup(field) != BRCMF_RAMSIZE_MAGIC)
++              return;
++      field++;
++      newsize = le32_to_cpup(field);
++
++      brcmf_dbg(PCIE, "Found ramsize info in FW, adjusting to 0x%x\n",
++                newsize);
++      devinfo->ci->ramsize = newsize;
++}
++
++
+ static int
+ brcmf_pcie_init_share_ram_info(struct brcmf_pciedev_info *devinfo,
+                              u32 sharedram_addr)
+@@ -1694,6 +1720,13 @@ static void brcmf_pcie_setup(struct devi
+ 
+       brcmf_pcie_attach(devinfo);
+ 
++      /* Some of the firmwares have the size of the memory of the device
++       * defined inside the firmware. This is because part of the memory in
++       * the device is shared and the devision is determined by FW. Parse
++       * the firmware and adjust the chip memory size now.
++       */
++      brcmf_pcie_adjust_ramsize(devinfo, (u8 *)fw->data, fw->size);
++
+       ret = brcmf_pcie_download_fw_nvram(devinfo, fw, nvram, nvram_len);
+       if (ret)
+               goto fail;

diff --git a/package/kernel/mac80211/patches/344-0012-brcmfmac-increase-timeout-for-tx-eapol.patch b/package/kernel/mac80211/patches/344-0012-brcmfmac-increase-timeout-for-tx-eapol.patch
new file mode 100644 (file)
index 0000000..c529ff2
--- /dev/null
+++ b/package/kernel/mac80211/patches/344-0012-brcmfmac-increase-timeout-for-tx-eapol.patch
@@ -0,0 +1,30 @@
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:01 +0100
+Subject: [PATCH] brcmfmac: increase timeout for tx eapol
+
+When keys get set and updated this has to happen after eapol got
+transmitted (without key or old key) before the key can be updated.
+To make sure the order of sending eapol and configuring key is done
+correctly a timeout for tx of eapol is applied. This timeout is set
+to 50 msec, which is not always enough. Especially in AP mode and
+key updates the timeout may need to be much longer because client(s)
+can be in powersave. Increase the timeout from 50 to 950 msec.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -40,7 +40,7 @@ MODULE_AUTHOR("Broadcom Corporation");
+ MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
+ MODULE_LICENSE("Dual BSD/GPL");
+ 
+-#define MAX_WAIT_FOR_8021X_TX                 msecs_to_jiffies(50)
++#define MAX_WAIT_FOR_8021X_TX                 msecs_to_jiffies(950)
+ 
+ /* AMPDU rx reordering definitions */
+ #define BRCMF_RXREORDER_FLOWID_OFFSET         0