LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+++ /dev/null
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Derived from the MPC8xx FEC driver.
- * Adapted for MPC512x by Grzegorz Bernacki <gjb@semihalf.com>
- */
-
-#include <common.h>
-#include <mpc512x.h>
-#include <malloc.h>
-#include <net.h>
-#include <miiphy.h>
-#include "fec.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define DEBUG 0
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
- defined(CONFIG_MPC512x_FEC)
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#if (DEBUG & 0x40)
-static uint32 local_crc32(char *string, unsigned int crc_value, int len);
-#endif
-
-int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal);
-int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data);
-int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis);
-
-static uchar rx_buff[FEC_BUFFER_SIZE];
-static int rx_buff_idx = 0;
-
-/********************************************************************/
-#if (DEBUG & 0x2)
-static void mpc512x_fec_phydump (char *devname)
-{
- uint16 phyStatus, i;
- uint8 phyAddr = CONFIG_PHY_ADDR;
- uint8 reg_mask[] = {
- /* regs to print: 0...8, 21,27,31 */
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1,
- };
-
- for (i = 0; i < 32; i++) {
- if (reg_mask[i]) {
- miiphy_read (devname, phyAddr, i, &phyStatus);
- printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
- }
- }
-}
-#endif
-
-/********************************************************************/
-static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec)
-{
- int ix;
-
- /*
- * Receive BDs init
- */
- for (ix = 0; ix < FEC_RBD_NUM; ix++) {
- fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix];
- fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY;
- fec->bdBase->rbd[ix].dataLength = 0;
- }
-
- /*
- * have the last RBD to close the ring
- */
- fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP;
- fec->rbdIndex = 0;
-
- /*
- * Trasmit BDs init
- */
- for (ix = 0; ix < FEC_TBD_NUM; ix++) {
- fec->bdBase->tbd[ix].status = 0;
- }
-
- /*
- * Have the last TBD to close the ring
- */
- fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP;
-
- /*
- * Initialize some indices
- */
- fec->tbdIndex = 0;
- fec->usedTbdIndex = 0;
- fec->cleanTbdNum = FEC_TBD_NUM;
-
- return 0;
-}
-
-/********************************************************************/
-static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd)
-{
- /*
- * Reset buffer descriptor as empty
- */
- if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
- pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
- else
- pRbd->status = FEC_RBD_EMPTY;
-
- pRbd->dataLength = 0;
-
- /*
- * Increment BD count
- */
- fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
-
- /*
- * Now, we have an empty RxBD, notify FEC
- */
- fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */
-}
-
-/********************************************************************/
-static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec)
-{
- volatile FEC_TBD *pUsedTbd;
-
-#if (DEBUG & 0x1)
- printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
- fec->cleanTbdNum, fec->usedTbdIndex);
-#endif
-
- /*
- * process all the consumed TBDs
- */
- while (fec->cleanTbdNum < FEC_TBD_NUM) {
- pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex];
- if (pUsedTbd->status & FEC_TBD_READY) {
-#if (DEBUG & 0x20)
- printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex);
-#endif
- return;
- }
-
- /*
- * clean this buffer descriptor
- */
- if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
- pUsedTbd->status = FEC_TBD_WRAP;
- else
- pUsedTbd->status = 0;
-
- /*
- * update some indeces for a correct handling of the TBD ring
- */
- fec->cleanTbdNum++;
- fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
- }
-}
-
-/********************************************************************/
-static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac)
-{
- uint8 currByte; /* byte for which to compute the CRC */
- int byte; /* loop - counter */
- int bit; /* loop - counter */
- uint32 crc = 0xffffffff; /* initial value */
-
- /*
- * The algorithm used is the following:
- * we loop on each of the six bytes of the provided address,
- * and we compute the CRC by left-shifting the previous
- * value by one position, so that each bit in the current
- * byte of the address may contribute the calculation. If
- * the latter and the MSB in the CRC are different, then
- * the CRC value so computed is also ex-ored with the
- * "polynomium generator". The current byte of the address
- * is also shifted right by one bit at each iteration.
- * This is because the CRC generatore in hardware is implemented
- * as a shift-register with as many ex-ores as the radixes
- * in the polynomium. This suggests that we represent the
- * polynomiumm itself as a 32-bit constant.
- */
- for (byte = 0; byte < 6; byte++) {
- currByte = mac[byte];
- for (bit = 0; bit < 8; bit++) {
- if ((currByte & 0x01) ^ (crc & 0x01)) {
- crc >>= 1;
- crc = crc ^ 0xedb88320;
- } else {
- crc >>= 1;
- }
- currByte >>= 1;
- }
- }
-
- crc = crc >> 26;
-
- /*
- * Set individual hash table register
- */
- if (crc >= 32) {
- fec->eth->iaddr1 = (1 << (crc - 32));
- fec->eth->iaddr2 = 0;
- } else {
- fec->eth->iaddr1 = 0;
- fec->eth->iaddr2 = (1 << crc);
- }
-
- /*
- * Set physical address
- */
- fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
- fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
-}
-
-/********************************************************************/
-static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
-{
- mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
-
-#if (DEBUG & 0x1)
- printf ("mpc512x_fec_init... Begin\n");
-#endif
-
- /* Set interrupt mask register */
- fec->eth->imask = 0x00000000;
-
- /* Clear FEC-Lite interrupt event register(IEVENT) */
- fec->eth->ievent = 0xffffffff;
-
- /* Set transmit fifo watermark register(X_WMRK), default = 64 */
- fec->eth->x_wmrk = 0x0;
-
- /* Set Opcode/Pause Duration Register */
- fec->eth->op_pause = 0x00010020;
-
- /* Frame length=1522; MII mode */
- fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24;
-
- /* Half-duplex, heartbeat disabled */
- fec->eth->x_cntrl = 0x00000000;
-
- /* Enable MIB counters */
- fec->eth->mib_control = 0x0;
-
- /* Setup recv fifo start and buff size */
- fec->eth->r_fstart = 0x500;
- fec->eth->r_buff_size = FEC_BUFFER_SIZE;
-
- /* Setup BD base addresses */
- fec->eth->r_des_start = (uint32)fec->bdBase->rbd;
- fec->eth->x_des_start = (uint32)fec->bdBase->tbd;
-
- /* DMA Control */
- fec->eth->dma_control = 0xc0000000;
-
- /* Enable FEC */
- fec->eth->ecntrl |= 0x00000006;
-
- /* Initilize addresses and status words of BDs */
- mpc512x_fec_bd_init (fec);
-
- /* Descriptor polling active */
- fec->eth->r_des_active = 0x01000000;
-
-#if (DEBUG & 0x1)
- printf("mpc512x_fec_init... Done \n");
-#endif
- return 1;
-}
-
-/********************************************************************/
-int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis)
-{
- mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
- const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
- int timeout = 1;
- uint16 phyStatus;
-
-#if (DEBUG & 0x1)
- printf ("mpc512x_fec_init_phy... Begin\n");
-#endif
-
- /*
- * Clear FEC-Lite interrupt event register(IEVENT)
- */
- fec->eth->ievent = 0xffffffff;
-
- /*
- * Set interrupt mask register
- */
- fec->eth->imask = 0x00000000;
-
- if (fec->xcv_type != SEVENWIRE) {
- /*
- * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
- * and do not drop the Preamble.
- */
- fec->eth->mii_speed = (((gd->ips_clk / 1000000) / 5) + 1) << 1;
-
- /*
- * Reset PHY, then delay 300ns
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
- udelay (1000);
-
- if (fec->xcv_type == MII10) {
- /*
- * Force 10Base-T, FDX operation
- */
-#if (DEBUG & 0x2)
- printf ("Forcing 10 Mbps ethernet link... ");
-#endif
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-
- miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
-
- timeout = 20;
- do { /* wait for link status to go down */
- udelay (10000);
- if ((timeout--) == 0) {
-#if (DEBUG & 0x2)
- printf ("hmmm, should not have waited...");
-#endif
- break;
- }
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#if (DEBUG & 0x2)
- printf ("=");
-#endif
- } while ((phyStatus & 0x0004)); /* !link up */
-
- timeout = 1000;
- do { /* wait for link status to come back up */
- udelay (10000);
- if ((timeout--) == 0) {
- printf ("failed. Link is down.\n");
- break;
- }
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#if (DEBUG & 0x2)
- printf ("+");
-#endif
- } while (!(phyStatus & 0x0004)); /* !link up */
-
-#if (DEBUG & 0x2)
- printf ("done.\n");
-#endif
- } else { /* MII100 */
- /*
- * Set the auto-negotiation advertisement register bits
- */
- miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
-
- /*
- * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
-
- /*
- * Wait for AN completion
- */
- timeout = 50000;
- do {
- udelay (1000);
-
- if ((timeout--) == 0) {
-#if (DEBUG & 0x2)
- printf ("PHY auto neg 0 failed...\n");
-#endif
- return -1;
- }
-
- if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) {
-#if (DEBUG & 0x2)
- printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
-#endif
- return -1;
- }
- } while (!(phyStatus & 0x0004));
-
-#if (DEBUG & 0x2)
- printf ("PHY auto neg complete! \n");
-#endif
- }
- }
-
-#if (DEBUG & 0x2)
- if (fec->xcv_type != SEVENWIRE)
- mpc512x_fec_phydump (dev->name);
-#endif
-
-#if (DEBUG & 0x1)
- printf ("mpc512x_fec_init_phy... Done \n");
-#endif
- return 1;
-}
-
-/********************************************************************/
-static void mpc512x_fec_halt (struct eth_device *dev)
-{
- mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
- int counter = 0xffff;
-
-#if (DEBUG & 0x2)
- if (fec->xcv_type != SEVENWIRE)
- mpc512x_fec_phydump (dev->name);
-#endif
-
- /*
- * mask FEC chip interrupts
- */
- fec->eth->imask = 0;
-
- /*
- * issue graceful stop command to the FEC transmitter if necessary
- */
- fec->eth->x_cntrl |= 0x00000001;
-
- /*
- * wait for graceful stop to register
- */
- while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ;
-
- /*
- * Disable the Ethernet Controller
- */
- fec->eth->ecntrl &= 0xfffffffd;
-
- /*
- * Issue a reset command to the FEC chip
- */
- fec->eth->ecntrl |= 0x1;
-
- /*
- * wait at least 16 clock cycles
- */
- udelay (10);
-#if (DEBUG & 0x3)
- printf ("Ethernet task stopped\n");
-#endif
-}
-
-/********************************************************************/
-
-static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data,
- int data_length)
-{
- /*
- * This routine transmits one frame. This routine only accepts
- * 6-byte Ethernet addresses.
- */
- mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
- volatile FEC_TBD *pTbd;
-
-#if (DEBUG & 0x20)
- printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status);
-#endif
-
- /*
- * Clear Tx BD ring at first
- */
- mpc512x_fec_tbd_scrub (fec);
-
- /*
- * Check for valid length of data.
- */
- if ((data_length > 1500) || (data_length <= 0)) {
- return -1;
- }
-
- /*
- * Check the number of vacant TxBDs.
- */
- if (fec->cleanTbdNum < 1) {
-#if (DEBUG & 0x20)
- printf ("No available TxBDs ...\n");
-#endif
- return -1;
- }
-
- /*
- * Get the first TxBD to send the mac header
- */
- pTbd = &fec->bdBase->tbd[fec->tbdIndex];
- pTbd->dataLength = data_length;
- pTbd->dataPointer = (uint32)eth_data;
- pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
- fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
-
- /* Activate transmit Buffer Descriptor polling */
- fec->eth->x_des_active = 0x01000000; /* Descriptor polling active */
-
-#if (DEBUG & 0x8)
- printf ( "+" );
-#endif
-
- fec->cleanTbdNum -= 1;
-
- /*
- * wait until frame is sent .
- */
- while (pTbd->status & FEC_TBD_READY) {
- udelay (10);
-#if (DEBUG & 0x8)
- printf ("TDB status = %04x\n", pTbd->status);
-#endif
- }
-
- return 0;
-}
-
-
-/********************************************************************/
-static int mpc512x_fec_recv (struct eth_device *dev)
-{
- /*
- * This command pulls one frame from the card
- */
- mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
- volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex];
- unsigned long ievent;
- int frame_length = 0;
-
-#if (DEBUG & 0x1)
- printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex);
-#endif
-#if (DEBUG & 0x8)
- printf( "-" );
-#endif
-
- /*
- * Check if any critical events have happened
- */
- ievent = fec->eth->ievent;
- fec->eth->ievent = ievent;
- if (ievent & 0x20060000) {
- /* BABT, Rx/Tx FIFO errors */
- mpc512x_fec_halt (dev);
- mpc512x_fec_init (dev, NULL);
- return 0;
- }
- if (ievent & 0x80000000) {
- /* Heartbeat error */
- fec->eth->x_cntrl |= 0x00000001;
- }
- if (ievent & 0x10000000) {
- /* Graceful stop complete */
- if (fec->eth->x_cntrl & 0x00000001) {
- mpc512x_fec_halt (dev);
- fec->eth->x_cntrl &= ~0x00000001;
- mpc512x_fec_init (dev, NULL);
- }
- }
-
- if (!(pRbd->status & FEC_RBD_EMPTY)) {
- if (!(pRbd->status & FEC_RBD_ERR) &&
- ((pRbd->dataLength - 4) > 14)) {
-
- /*
- * Get buffer size
- */
- if (pRbd->status & FEC_RBD_LAST)
- frame_length = pRbd->dataLength - 4;
- else
- frame_length = pRbd->dataLength;
-#if (DEBUG & 0x20)
- {
- int i;
- printf ("recv data length 0x%08x data hdr: ",
- pRbd->dataLength);
- for (i = 0; i < 14; i++)
- printf ("%x ", *((uint8*)pRbd->dataPointer + i));
- printf("\n");
- }
-#endif
- /*
- * Fill the buffer and pass it to upper layers
- */
- memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer,
- frame_length - rx_buff_idx);
- rx_buff_idx = frame_length;
-
- if (pRbd->status & FEC_RBD_LAST) {
- NetReceive ((uchar*)rx_buff, frame_length);
- rx_buff_idx = 0;
- }
- }
-
- /*
- * Reset buffer descriptor as empty
- */
- mpc512x_fec_rbd_clean (fec, pRbd);
- }
-
- /* Try to fill Buffer Descriptors */
- fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */
- return frame_length;
-}
-
-/********************************************************************/
-int mpc512x_fec_initialize (bd_t * bis)
-{
- mpc512x_fec_priv *fec;
- struct eth_device *dev;
- int i;
- char *tmp, *end, env_enetaddr[6];
- void * bd;
-
- fec = (mpc512x_fec_priv *) malloc (sizeof(*fec));
- dev = (struct eth_device *) malloc (sizeof(*dev));
- memset (dev, 0, sizeof *dev);
-
- fec->eth = (ethernet_regs *) MPC512X_FEC;
-
-# ifndef CONFIG_FEC_10MBIT
- fec->xcv_type = MII100;
-# else
- fec->xcv_type = MII10;
-# endif
- dev->priv = (void *)fec;
- dev->iobase = MPC512X_FEC;
- dev->init = mpc512x_fec_init;
- dev->halt = mpc512x_fec_halt;
- dev->send = mpc512x_fec_send;
- dev->recv = mpc512x_fec_recv;
-
- sprintf (dev->name, "FEC ETHERNET");
- eth_register (dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- miiphy_register (dev->name,
- fec512x_miiphy_read, fec512x_miiphy_write);
-#endif
-
- /* Clean up space FEC's MIB and FIFO RAM ...*/
- memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400);
-
- /*
- * Malloc space for BDs (must be quad word-aligned)
- * this pointer is lost, so cannot be freed
- */
- bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f);
- fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0);
- memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f);
-
- /*
- * Set interrupt mask register
- */
- fec->eth->imask = 0x00000000;
-
- /*
- * Clear FEC-Lite interrupt event register(IEVENT)
- */
- fec->eth->ievent = 0xffffffff;
-
- /*
- * Try to set the mac address now. The fec mac address is
- * a garbage after reset. When not using fec for booting
- * the Linux fec driver will try to work with this garbage.
- */
- tmp = getenv ("ethaddr");
- if (tmp) {
- for (i=0; i<6; i++) {
- env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end+1 : end;
- }
- mpc512x_fec_set_hwaddr (fec, env_enetaddr);
- fec->eth->gaddr1 = 0x00000000;
- fec->eth->gaddr2 = 0x00000000;
- }
-
- mpc512x_fec_init_phy (dev, bis);
-
- return 1;
-}
-
-/* MII-interface related functions */
-/********************************************************************/
-int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal)
-{
- ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC;
- uint32 reg; /* convenient holder for the PHY register */
- uint32 phy; /* convenient holder for the PHY */
- int timeout = 0xffff;
-
- /*
- * reading from any PHY's register is done by properly
- * programming the FEC's MII data register.
- */
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
- eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg);
-
- /*
- * wait for the related interrupt
- */
- while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
-
- if (timeout == 0) {
-#if (DEBUG & 0x2)
- printf ("Read MDIO failed...\n");
-#endif
- return -1;
- }
-
- /*
- * clear mii interrupt bit
- */
- eth->ievent = 0x00800000;
-
- /*
- * it's now safe to read the PHY's register
- */
- *retVal = (uint16) eth->mii_data;
-
- return 0;
-}
-
-/********************************************************************/
-int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data)
-{
- ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC;
- uint32 reg; /* convenient holder for the PHY register */
- uint32 phy; /* convenient holder for the PHY */
- int timeout = 0xffff;
-
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
- eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
- FEC_MII_DATA_TA | phy | reg | data);
-
- /*
- * wait for the MII interrupt
- */
- while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
-
- if (timeout == 0) {
-#if (DEBUG & 0x2)
- printf ("Write MDIO failed...\n");
-#endif
- return -1;
- }
-
- /*
- * clear MII interrupt bit
- */
- eth->ievent = 0x00800000;
-
- return 0;
-}
-
-#if (DEBUG & 0x40)
-static uint32 local_crc32 (char *string, unsigned int crc_value, int len)
-{
- int i;
- char c;
- unsigned int crc, count;
-
- /*
- * crc32 algorithm
- */
- /*
- * crc = 0xffffffff; * The initialized value should be 0xffffffff
- */
- crc = crc_value;
-
- for (i = len; --i >= 0;) {
- c = *string++;
- for (count = 0; count < 8; count++) {
- if ((c & 0x01) ^ (crc & 0x01)) {
- crc >>= 1;
- crc = crc ^ 0xedb88320;
- } else {
- crc >>= 1;
- }
- c >>= 1;
- }
- }
-
- /*
- * In big endian system, do byte swaping for crc value
- */
- /**/ return crc;
-}
-#endif /* DEBUG */
-
-#endif /* CONFIG_MPC512x_FEC */
+++ /dev/null
-/*
- * (C) Copyright 2003 - 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Derived from the MPC8xx driver's header file.
- */
-
-#ifndef __MPC512X_FEC_H
-#define __MPC512X_FEC_H
-
-#include <common.h>
-#include <mpc512x.h>
-
-typedef unsigned long uint32;
-typedef unsigned short uint16;
-typedef unsigned char uint8;
-
-typedef struct ethernet_register_set {
-
-/* [10:2]addr = 00 */
-
-/* Control and status Registers (offset 000-1FF) */
-
- volatile uint32 fec_id; /* MBAR_ETH + 0x000 */
- volatile uint32 ievent; /* MBAR_ETH + 0x004 */
- volatile uint32 imask; /* MBAR_ETH + 0x008 */
-
- volatile uint32 RES0[1]; /* MBAR_ETH + 0x00C */
- volatile uint32 r_des_active; /* MBAR_ETH + 0x010 */
- volatile uint32 x_des_active; /* MBAR_ETH + 0x014 */
-
- volatile uint32 RES1[3]; /* MBAR_ETH + 0x018-020 */
- volatile uint32 ecntrl; /* MBAR_ETH + 0x024 */
-
- volatile uint32 RES2[6]; /* MBAR_ETH + 0x028-03C */
- volatile uint32 mii_data; /* MBAR_ETH + 0x040 */
- volatile uint32 mii_speed; /* MBAR_ETH + 0x044 */
-
- volatile uint32 RES3[7]; /* MBAR_ETH + 0x048-060 */
- volatile uint32 mib_control; /* MBAR_ETH + 0x064 */
-
- volatile uint32 RES4[7]; /* MBAR_ETH + 0x068-80 */
- volatile uint32 r_cntrl; /* MBAR_ETH + 0x084 */
- volatile uint32 r_hash; /* MBAR_ETH + 0x088 */
-
- volatile uint32 RES5[14]; /* MBAR_ETH + 0x08c-0C0 */
- volatile uint32 x_cntrl; /* MBAR_ETH + 0x0C4 */
-
- volatile uint32 RES6[7]; /* MBAR_ETH + 0x0C8-0E0 */
- volatile uint32 paddr1; /* MBAR_ETH + 0x0E4 */
- volatile uint32 paddr2; /* MBAR_ETH + 0x0E8 */
- volatile uint32 op_pause; /* MBAR_ETH + 0x0EC */
-
- volatile uint32 RES7[10]; /* MBAR_ETH + 0x0F0-114 */
- volatile uint32 iaddr1; /* MBAR_ETH + 0x118 */
- volatile uint32 iaddr2; /* MBAR_ETH + 0x11C */
- volatile uint32 gaddr1; /* MBAR_ETH + 0x120 */
- volatile uint32 gaddr2; /* MBAR_ETH + 0x124 */
-
- volatile uint32 RES8[6]; /* MBAR_ETH + 0x128-13C */
- volatile uint32 fifo_id; /* MBAR_ETH + 0x140 */
- volatile uint32 x_wmrk; /* MBAR_ETH + 0x144 */
- volatile uint32 RES9[1]; /* MBAR_ETH + 0x148 */
- volatile uint32 r_bound; /* MBAR_ETH + 0x14C */
- volatile uint32 r_fstart; /* MBAR_ETH + 0x150 */
-
- volatile uint32 RES10[11]; /* MBAR_ETH + 0x154-17C */
- volatile uint32 r_des_start; /* MBAR_ETH + 0x180 */
- volatile uint32 x_des_start; /* MBAR_ETH + 0x184 */
- volatile uint32 r_buff_size; /* MBAR_ETH + 0x188 */
- volatile uint32 RES11[26]; /* MBAR_ETH + 0x18C-1F0 */
- volatile uint32 dma_control; /* MBAR_ETH + 0x1F4 */
- volatile uint32 RES12[2]; /* MBAR_ETH + 0x1F8-1FC */
-
-/* MIB COUNTERS (Offset 200-2FF) */
-
- volatile uint32 rmon_t_drop; /* MBAR_ETH + 0x200 */
- volatile uint32 rmon_t_packets; /* MBAR_ETH + 0x204 */
- volatile uint32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */
- volatile uint32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */
- volatile uint32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */
- volatile uint32 rmon_t_undersize; /* MBAR_ETH + 0x214 */
- volatile uint32 rmon_t_oversize; /* MBAR_ETH + 0x218 */
- volatile uint32 rmon_t_frag; /* MBAR_ETH + 0x21C */
- volatile uint32 rmon_t_jab; /* MBAR_ETH + 0x220 */
- volatile uint32 rmon_t_col; /* MBAR_ETH + 0x224 */
- volatile uint32 rmon_t_p64; /* MBAR_ETH + 0x228 */
- volatile uint32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */
- volatile uint32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */
- volatile uint32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */
- volatile uint32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */
- volatile uint32 rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */
- volatile uint32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */
- volatile uint32 rmon_t_octets; /* MBAR_ETH + 0x244 */
- volatile uint32 ieee_t_drop; /* MBAR_ETH + 0x248 */
- volatile uint32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */
- volatile uint32 ieee_t_1col; /* MBAR_ETH + 0x250 */
- volatile uint32 ieee_t_mcol; /* MBAR_ETH + 0x254 */
- volatile uint32 ieee_t_def; /* MBAR_ETH + 0x258 */
- volatile uint32 ieee_t_lcol; /* MBAR_ETH + 0x25C */
- volatile uint32 ieee_t_excol; /* MBAR_ETH + 0x260 */
- volatile uint32 ieee_t_macerr; /* MBAR_ETH + 0x264 */
- volatile uint32 ieee_t_cserr; /* MBAR_ETH + 0x268 */
- volatile uint32 ieee_t_sqe; /* MBAR_ETH + 0x26C */
- volatile uint32 t_fdxfc; /* MBAR_ETH + 0x270 */
- volatile uint32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */
-
- volatile uint32 RES13[2]; /* MBAR_ETH + 0x278-27C */
- volatile uint32 rmon_r_drop; /* MBAR_ETH + 0x280 */
- volatile uint32 rmon_r_packets; /* MBAR_ETH + 0x284 */
- volatile uint32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */
- volatile uint32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */
- volatile uint32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */
- volatile uint32 rmon_r_undersize; /* MBAR_ETH + 0x294 */
- volatile uint32 rmon_r_oversize; /* MBAR_ETH + 0x298 */
- volatile uint32 rmon_r_frag; /* MBAR_ETH + 0x29C */
- volatile uint32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */
-
- volatile uint32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */
-
- volatile uint32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */
- volatile uint32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */
- volatile uint32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */
- volatile uint32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */
- volatile uint32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */
- volatile uint32 rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */
- volatile uint32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */
- volatile uint32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */
- volatile uint32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */
- volatile uint32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */
- volatile uint32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */
- volatile uint32 ieee_r_align; /* MBAR_ETH + 0x2D4 */
- volatile uint32 r_macerr; /* MBAR_ETH + 0x2D8 */
- volatile uint32 r_fdxfc; /* MBAR_ETH + 0x2DC */
- volatile uint32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */
-
- volatile uint32 RES14[6]; /* MBAR_ETH + 0x2E4-2FC */
-
- volatile uint32 RES15[64]; /* MBAR_ETH + 0x300-3FF */
-} ethernet_regs;
-
-/* Receive & Transmit Buffer Descriptor definitions */
-typedef struct BufferDescriptor {
- uint16 status;
- uint16 dataLength;
- uint32 dataPointer;
-} FEC_RBD;
-
-typedef struct {
- uint16 status;
- uint16 dataLength;
- uint32 dataPointer;
-} FEC_TBD;
-
-/* private structure */
-typedef enum {
- SEVENWIRE, /* 7-wire */
- MII10, /* MII 10Mbps */
- MII100 /* MII 100Mbps */
-} xceiver_type;
-
-/* BD Numer definitions */
-#define FEC_TBD_NUM 48 /* The user can adjust this value */
-#define FEC_RBD_NUM 32 /* The user can adjust this value */
-
-/* packet size limit */
-#define FEC_MAX_FRAME_LEN 1522 /* recommended default value */
-
-/* Buffer size must be evenly divisible by 16 */
-#define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf))
-
-typedef struct {
- uint8 frame[FEC_BUFFER_SIZE];
-} mpc512x_frame;
-
-typedef struct {
- FEC_RBD rbd[FEC_RBD_NUM]; /* RBD ring */
- FEC_TBD tbd[FEC_TBD_NUM]; /* TBD ring */
- mpc512x_frame recv_frames[FEC_RBD_NUM]; /* receive buff */
-} mpc512x_buff_descs;
-
-typedef struct {
- ethernet_regs *eth;
- xceiver_type xcv_type; /* transceiver type */
- mpc512x_buff_descs *bdBase; /* BD rings and recv buffer */
- uint16 rbdIndex; /* next receive BD to read */
- uint16 tbdIndex; /* next transmit BD to send */
- uint16 usedTbdIndex; /* next transmit BD to clean */
- uint16 cleanTbdNum; /* the number of available transmit BDs */
-} mpc512x_fec_priv;
-
-/* RBD bits definitions */
-#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */
-#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */
-#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */
-#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */
-#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */
-#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */
-#define FEC_RBD_LG 0x0020 /* Frame length violation */
-#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */
-#define FEC_RBD_SH 0x0008 /* Short frame */
-#define FEC_RBD_CR 0x0004 /* CRC error */
-#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */
-#define FEC_RBD_TR 0x0001 /* Frame is truncated */
-#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
- FEC_RBD_OV | FEC_RBD_TR)
-
-/* TBD bits definitions */
-#define FEC_TBD_READY 0x8000 /* Buffer is ready */
-#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */
-#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */
-#define FEC_TBD_TC 0x0400 /* Transmit the CRC */
-#define FEC_TBD_ABC 0x0200 /* Append bad CRC */
-
-/* MII-related definitios */
-#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */
-#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */
-#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */
-#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */
-#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */
-#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */
-#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */
-
-#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */
-#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */
-
-#endif /* __MPC512X_FEC_H */
COBJS-$(CONFIG_MACB) += macb.o
COBJS-$(CONFIG_MCFFEC) += mcffec.o
COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
+COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o
COBJS-$(CONFIG_NATSEMI) += natsemi.o
ifeq ($(CONFIG_DRIVER_NE2000),y)
COBJS-y += ne2000.o
--- /dev/null
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Derived from the MPC8xx FEC driver.
+ * Adapted for MPC512x by Grzegorz Bernacki <gjb@semihalf.com>
+ */
+
+#include <common.h>
+#include <mpc512x.h>
+#include <malloc.h>
+#include <net.h>
+#include <miiphy.h>
+#include "mpc512x_fec.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DEBUG 0
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_MPC512x_FEC)
+
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
+
+#if (DEBUG & 0x40)
+static uint32 local_crc32(char *string, unsigned int crc_value, int len);
+#endif
+
+int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal);
+int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data);
+int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis);
+
+static uchar rx_buff[FEC_BUFFER_SIZE];
+static int rx_buff_idx = 0;
+
+/********************************************************************/
+#if (DEBUG & 0x2)
+static void mpc512x_fec_phydump (char *devname)
+{
+ uint16 phyStatus, i;
+ uint8 phyAddr = CONFIG_PHY_ADDR;
+ uint8 reg_mask[] = {
+ /* regs to print: 0...8, 21,27,31 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1,
+ };
+
+ for (i = 0; i < 32; i++) {
+ if (reg_mask[i]) {
+ miiphy_read (devname, phyAddr, i, &phyStatus);
+ printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
+ }
+ }
+}
+#endif
+
+/********************************************************************/
+static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec)
+{
+ int ix;
+
+ /*
+ * Receive BDs init
+ */
+ for (ix = 0; ix < FEC_RBD_NUM; ix++) {
+ fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix];
+ fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY;
+ fec->bdBase->rbd[ix].dataLength = 0;
+ }
+
+ /*
+ * have the last RBD to close the ring
+ */
+ fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP;
+ fec->rbdIndex = 0;
+
+ /*
+ * Trasmit BDs init
+ */
+ for (ix = 0; ix < FEC_TBD_NUM; ix++) {
+ fec->bdBase->tbd[ix].status = 0;
+ }
+
+ /*
+ * Have the last TBD to close the ring
+ */
+ fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP;
+
+ /*
+ * Initialize some indices
+ */
+ fec->tbdIndex = 0;
+ fec->usedTbdIndex = 0;
+ fec->cleanTbdNum = FEC_TBD_NUM;
+
+ return 0;
+}
+
+/********************************************************************/
+static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd)
+{
+ /*
+ * Reset buffer descriptor as empty
+ */
+ if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
+ pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
+ else
+ pRbd->status = FEC_RBD_EMPTY;
+
+ pRbd->dataLength = 0;
+
+ /*
+ * Increment BD count
+ */
+ fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
+
+ /*
+ * Now, we have an empty RxBD, notify FEC
+ */
+ fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */
+}
+
+/********************************************************************/
+static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec)
+{
+ volatile FEC_TBD *pUsedTbd;
+
+#if (DEBUG & 0x1)
+ printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
+ fec->cleanTbdNum, fec->usedTbdIndex);
+#endif
+
+ /*
+ * process all the consumed TBDs
+ */
+ while (fec->cleanTbdNum < FEC_TBD_NUM) {
+ pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex];
+ if (pUsedTbd->status & FEC_TBD_READY) {
+#if (DEBUG & 0x20)
+ printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex);
+#endif
+ return;
+ }
+
+ /*
+ * clean this buffer descriptor
+ */
+ if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
+ pUsedTbd->status = FEC_TBD_WRAP;
+ else
+ pUsedTbd->status = 0;
+
+ /*
+ * update some indeces for a correct handling of the TBD ring
+ */
+ fec->cleanTbdNum++;
+ fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
+ }
+}
+
+/********************************************************************/
+static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac)
+{
+ uint8 currByte; /* byte for which to compute the CRC */
+ int byte; /* loop - counter */
+ int bit; /* loop - counter */
+ uint32 crc = 0xffffffff; /* initial value */
+
+ /*
+ * The algorithm used is the following:
+ * we loop on each of the six bytes of the provided address,
+ * and we compute the CRC by left-shifting the previous
+ * value by one position, so that each bit in the current
+ * byte of the address may contribute the calculation. If
+ * the latter and the MSB in the CRC are different, then
+ * the CRC value so computed is also ex-ored with the
+ * "polynomium generator". The current byte of the address
+ * is also shifted right by one bit at each iteration.
+ * This is because the CRC generatore in hardware is implemented
+ * as a shift-register with as many ex-ores as the radixes
+ * in the polynomium. This suggests that we represent the
+ * polynomiumm itself as a 32-bit constant.
+ */
+ for (byte = 0; byte < 6; byte++) {
+ currByte = mac[byte];
+ for (bit = 0; bit < 8; bit++) {
+ if ((currByte & 0x01) ^ (crc & 0x01)) {
+ crc >>= 1;
+ crc = crc ^ 0xedb88320;
+ } else {
+ crc >>= 1;
+ }
+ currByte >>= 1;
+ }
+ }
+
+ crc = crc >> 26;
+
+ /*
+ * Set individual hash table register
+ */
+ if (crc >= 32) {
+ fec->eth->iaddr1 = (1 << (crc - 32));
+ fec->eth->iaddr2 = 0;
+ } else {
+ fec->eth->iaddr1 = 0;
+ fec->eth->iaddr2 = (1 << crc);
+ }
+
+ /*
+ * Set physical address
+ */
+ fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
+ fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
+}
+
+/********************************************************************/
+static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
+{
+ mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
+
+#if (DEBUG & 0x1)
+ printf ("mpc512x_fec_init... Begin\n");
+#endif
+
+ /* Set interrupt mask register */
+ fec->eth->imask = 0x00000000;
+
+ /* Clear FEC-Lite interrupt event register(IEVENT) */
+ fec->eth->ievent = 0xffffffff;
+
+ /* Set transmit fifo watermark register(X_WMRK), default = 64 */
+ fec->eth->x_wmrk = 0x0;
+
+ /* Set Opcode/Pause Duration Register */
+ fec->eth->op_pause = 0x00010020;
+
+ /* Frame length=1522; MII mode */
+ fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24;
+
+ /* Half-duplex, heartbeat disabled */
+ fec->eth->x_cntrl = 0x00000000;
+
+ /* Enable MIB counters */
+ fec->eth->mib_control = 0x0;
+
+ /* Setup recv fifo start and buff size */
+ fec->eth->r_fstart = 0x500;
+ fec->eth->r_buff_size = FEC_BUFFER_SIZE;
+
+ /* Setup BD base addresses */
+ fec->eth->r_des_start = (uint32)fec->bdBase->rbd;
+ fec->eth->x_des_start = (uint32)fec->bdBase->tbd;
+
+ /* DMA Control */
+ fec->eth->dma_control = 0xc0000000;
+
+ /* Enable FEC */
+ fec->eth->ecntrl |= 0x00000006;
+
+ /* Initilize addresses and status words of BDs */
+ mpc512x_fec_bd_init (fec);
+
+ /* Descriptor polling active */
+ fec->eth->r_des_active = 0x01000000;
+
+#if (DEBUG & 0x1)
+ printf("mpc512x_fec_init... Done \n");
+#endif
+ return 1;
+}
+
+/********************************************************************/
+int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis)
+{
+ mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
+ const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
+ int timeout = 1;
+ uint16 phyStatus;
+
+#if (DEBUG & 0x1)
+ printf ("mpc512x_fec_init_phy... Begin\n");
+#endif
+
+ /*
+ * Clear FEC-Lite interrupt event register(IEVENT)
+ */
+ fec->eth->ievent = 0xffffffff;
+
+ /*
+ * Set interrupt mask register
+ */
+ fec->eth->imask = 0x00000000;
+
+ if (fec->xcv_type != SEVENWIRE) {
+ /*
+ * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
+ * and do not drop the Preamble.
+ */
+ fec->eth->mii_speed = (((gd->ips_clk / 1000000) / 5) + 1) << 1;
+
+ /*
+ * Reset PHY, then delay 300ns
+ */
+ miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
+ udelay (1000);
+
+ if (fec->xcv_type == MII10) {
+ /*
+ * Force 10Base-T, FDX operation
+ */
+#if (DEBUG & 0x2)
+ printf ("Forcing 10 Mbps ethernet link... ");
+#endif
+ miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
+
+ miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
+
+ timeout = 20;
+ do { /* wait for link status to go down */
+ udelay (10000);
+ if ((timeout--) == 0) {
+#if (DEBUG & 0x2)
+ printf ("hmmm, should not have waited...");
+#endif
+ break;
+ }
+ miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
+#if (DEBUG & 0x2)
+ printf ("=");
+#endif
+ } while ((phyStatus & 0x0004)); /* !link up */
+
+ timeout = 1000;
+ do { /* wait for link status to come back up */
+ udelay (10000);
+ if ((timeout--) == 0) {
+ printf ("failed. Link is down.\n");
+ break;
+ }
+ miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
+#if (DEBUG & 0x2)
+ printf ("+");
+#endif
+ } while (!(phyStatus & 0x0004)); /* !link up */
+
+#if (DEBUG & 0x2)
+ printf ("done.\n");
+#endif
+ } else { /* MII100 */
+ /*
+ * Set the auto-negotiation advertisement register bits
+ */
+ miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
+
+ /*
+ * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
+ */
+ miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
+
+ /*
+ * Wait for AN completion
+ */
+ timeout = 50000;
+ do {
+ udelay (1000);
+
+ if ((timeout--) == 0) {
+#if (DEBUG & 0x2)
+ printf ("PHY auto neg 0 failed...\n");
+#endif
+ return -1;
+ }
+
+ if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) {
+#if (DEBUG & 0x2)
+ printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
+#endif
+ return -1;
+ }
+ } while (!(phyStatus & 0x0004));
+
+#if (DEBUG & 0x2)
+ printf ("PHY auto neg complete! \n");
+#endif
+ }
+ }
+
+#if (DEBUG & 0x2)
+ if (fec->xcv_type != SEVENWIRE)
+ mpc512x_fec_phydump (dev->name);
+#endif
+
+#if (DEBUG & 0x1)
+ printf ("mpc512x_fec_init_phy... Done \n");
+#endif
+ return 1;
+}
+
+/********************************************************************/
+static void mpc512x_fec_halt (struct eth_device *dev)
+{
+ mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
+ int counter = 0xffff;
+
+#if (DEBUG & 0x2)
+ if (fec->xcv_type != SEVENWIRE)
+ mpc512x_fec_phydump (dev->name);
+#endif
+
+ /*
+ * mask FEC chip interrupts
+ */
+ fec->eth->imask = 0;
+
+ /*
+ * issue graceful stop command to the FEC transmitter if necessary
+ */
+ fec->eth->x_cntrl |= 0x00000001;
+
+ /*
+ * wait for graceful stop to register
+ */
+ while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ;
+
+ /*
+ * Disable the Ethernet Controller
+ */
+ fec->eth->ecntrl &= 0xfffffffd;
+
+ /*
+ * Issue a reset command to the FEC chip
+ */
+ fec->eth->ecntrl |= 0x1;
+
+ /*
+ * wait at least 16 clock cycles
+ */
+ udelay (10);
+#if (DEBUG & 0x3)
+ printf ("Ethernet task stopped\n");
+#endif
+}
+
+/********************************************************************/
+
+static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data,
+ int data_length)
+{
+ /*
+ * This routine transmits one frame. This routine only accepts
+ * 6-byte Ethernet addresses.
+ */
+ mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
+ volatile FEC_TBD *pTbd;
+
+#if (DEBUG & 0x20)
+ printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status);
+#endif
+
+ /*
+ * Clear Tx BD ring at first
+ */
+ mpc512x_fec_tbd_scrub (fec);
+
+ /*
+ * Check for valid length of data.
+ */
+ if ((data_length > 1500) || (data_length <= 0)) {
+ return -1;
+ }
+
+ /*
+ * Check the number of vacant TxBDs.
+ */
+ if (fec->cleanTbdNum < 1) {
+#if (DEBUG & 0x20)
+ printf ("No available TxBDs ...\n");
+#endif
+ return -1;
+ }
+
+ /*
+ * Get the first TxBD to send the mac header
+ */
+ pTbd = &fec->bdBase->tbd[fec->tbdIndex];
+ pTbd->dataLength = data_length;
+ pTbd->dataPointer = (uint32)eth_data;
+ pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
+ fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
+
+ /* Activate transmit Buffer Descriptor polling */
+ fec->eth->x_des_active = 0x01000000; /* Descriptor polling active */
+
+#if (DEBUG & 0x8)
+ printf ( "+" );
+#endif
+
+ fec->cleanTbdNum -= 1;
+
+ /*
+ * wait until frame is sent .
+ */
+ while (pTbd->status & FEC_TBD_READY) {
+ udelay (10);
+#if (DEBUG & 0x8)
+ printf ("TDB status = %04x\n", pTbd->status);
+#endif
+ }
+
+ return 0;
+}
+
+
+/********************************************************************/
+static int mpc512x_fec_recv (struct eth_device *dev)
+{
+ /*
+ * This command pulls one frame from the card
+ */
+ mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
+ volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex];
+ unsigned long ievent;
+ int frame_length = 0;
+
+#if (DEBUG & 0x1)
+ printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex);
+#endif
+#if (DEBUG & 0x8)
+ printf( "-" );
+#endif
+
+ /*
+ * Check if any critical events have happened
+ */
+ ievent = fec->eth->ievent;
+ fec->eth->ievent = ievent;
+ if (ievent & 0x20060000) {
+ /* BABT, Rx/Tx FIFO errors */
+ mpc512x_fec_halt (dev);
+ mpc512x_fec_init (dev, NULL);
+ return 0;
+ }
+ if (ievent & 0x80000000) {
+ /* Heartbeat error */
+ fec->eth->x_cntrl |= 0x00000001;
+ }
+ if (ievent & 0x10000000) {
+ /* Graceful stop complete */
+ if (fec->eth->x_cntrl & 0x00000001) {
+ mpc512x_fec_halt (dev);
+ fec->eth->x_cntrl &= ~0x00000001;
+ mpc512x_fec_init (dev, NULL);
+ }
+ }
+
+ if (!(pRbd->status & FEC_RBD_EMPTY)) {
+ if (!(pRbd->status & FEC_RBD_ERR) &&
+ ((pRbd->dataLength - 4) > 14)) {
+
+ /*
+ * Get buffer size
+ */
+ if (pRbd->status & FEC_RBD_LAST)
+ frame_length = pRbd->dataLength - 4;
+ else
+ frame_length = pRbd->dataLength;
+#if (DEBUG & 0x20)
+ {
+ int i;
+ printf ("recv data length 0x%08x data hdr: ",
+ pRbd->dataLength);
+ for (i = 0; i < 14; i++)
+ printf ("%x ", *((uint8*)pRbd->dataPointer + i));
+ printf("\n");
+ }
+#endif
+ /*
+ * Fill the buffer and pass it to upper layers
+ */
+ memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer,
+ frame_length - rx_buff_idx);
+ rx_buff_idx = frame_length;
+
+ if (pRbd->status & FEC_RBD_LAST) {
+ NetReceive ((uchar*)rx_buff, frame_length);
+ rx_buff_idx = 0;
+ }
+ }
+
+ /*
+ * Reset buffer descriptor as empty
+ */
+ mpc512x_fec_rbd_clean (fec, pRbd);
+ }
+
+ /* Try to fill Buffer Descriptors */
+ fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */
+ return frame_length;
+}
+
+/********************************************************************/
+int mpc512x_fec_initialize (bd_t * bis)
+{
+ mpc512x_fec_priv *fec;
+ struct eth_device *dev;
+ int i;
+ char *tmp, *end, env_enetaddr[6];
+ void * bd;
+
+ fec = (mpc512x_fec_priv *) malloc (sizeof(*fec));
+ dev = (struct eth_device *) malloc (sizeof(*dev));
+ memset (dev, 0, sizeof *dev);
+
+ fec->eth = (ethernet_regs *) MPC512X_FEC;
+
+# ifndef CONFIG_FEC_10MBIT
+ fec->xcv_type = MII100;
+# else
+ fec->xcv_type = MII10;
+# endif
+ dev->priv = (void *)fec;
+ dev->iobase = MPC512X_FEC;
+ dev->init = mpc512x_fec_init;
+ dev->halt = mpc512x_fec_halt;
+ dev->send = mpc512x_fec_send;
+ dev->recv = mpc512x_fec_recv;
+
+ sprintf (dev->name, "FEC ETHERNET");
+ eth_register (dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ miiphy_register (dev->name,
+ fec512x_miiphy_read, fec512x_miiphy_write);
+#endif
+
+ /* Clean up space FEC's MIB and FIFO RAM ...*/
+ memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400);
+
+ /*
+ * Malloc space for BDs (must be quad word-aligned)
+ * this pointer is lost, so cannot be freed
+ */
+ bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f);
+ fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0);
+ memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f);
+
+ /*
+ * Set interrupt mask register
+ */
+ fec->eth->imask = 0x00000000;
+
+ /*
+ * Clear FEC-Lite interrupt event register(IEVENT)
+ */
+ fec->eth->ievent = 0xffffffff;
+
+ /*
+ * Try to set the mac address now. The fec mac address is
+ * a garbage after reset. When not using fec for booting
+ * the Linux fec driver will try to work with this garbage.
+ */
+ tmp = getenv ("ethaddr");
+ if (tmp) {
+ for (i=0; i<6; i++) {
+ env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0;
+ if (tmp)
+ tmp = (*end) ? end+1 : end;
+ }
+ mpc512x_fec_set_hwaddr (fec, env_enetaddr);
+ fec->eth->gaddr1 = 0x00000000;
+ fec->eth->gaddr2 = 0x00000000;
+ }
+
+ mpc512x_fec_init_phy (dev, bis);
+
+ return 1;
+}
+
+/* MII-interface related functions */
+/********************************************************************/
+int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal)
+{
+ ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC;
+ uint32 reg; /* convenient holder for the PHY register */
+ uint32 phy; /* convenient holder for the PHY */
+ int timeout = 0xffff;
+
+ /*
+ * reading from any PHY's register is done by properly
+ * programming the FEC's MII data register.
+ */
+ reg = regAddr << FEC_MII_DATA_RA_SHIFT;
+ phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+
+ eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg);
+
+ /*
+ * wait for the related interrupt
+ */
+ while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
+
+ if (timeout == 0) {
+#if (DEBUG & 0x2)
+ printf ("Read MDIO failed...\n");
+#endif
+ return -1;
+ }
+
+ /*
+ * clear mii interrupt bit
+ */
+ eth->ievent = 0x00800000;
+
+ /*
+ * it's now safe to read the PHY's register
+ */
+ *retVal = (uint16) eth->mii_data;
+
+ return 0;
+}
+
+/********************************************************************/
+int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data)
+{
+ ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC;
+ uint32 reg; /* convenient holder for the PHY register */
+ uint32 phy; /* convenient holder for the PHY */
+ int timeout = 0xffff;
+
+ reg = regAddr << FEC_MII_DATA_RA_SHIFT;
+ phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+
+ eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
+ FEC_MII_DATA_TA | phy | reg | data);
+
+ /*
+ * wait for the MII interrupt
+ */
+ while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
+
+ if (timeout == 0) {
+#if (DEBUG & 0x2)
+ printf ("Write MDIO failed...\n");
+#endif
+ return -1;
+ }
+
+ /*
+ * clear MII interrupt bit
+ */
+ eth->ievent = 0x00800000;
+
+ return 0;
+}
+
+#if (DEBUG & 0x40)
+static uint32 local_crc32 (char *string, unsigned int crc_value, int len)
+{
+ int i;
+ char c;
+ unsigned int crc, count;
+
+ /*
+ * crc32 algorithm
+ */
+ /*
+ * crc = 0xffffffff; * The initialized value should be 0xffffffff
+ */
+ crc = crc_value;
+
+ for (i = len; --i >= 0;) {
+ c = *string++;
+ for (count = 0; count < 8; count++) {
+ if ((c & 0x01) ^ (crc & 0x01)) {
+ crc >>= 1;
+ crc = crc ^ 0xedb88320;
+ } else {
+ crc >>= 1;
+ }
+ c >>= 1;
+ }
+ }
+
+ /*
+ * In big endian system, do byte swaping for crc value
+ */
+ /**/ return crc;
+}
+#endif /* DEBUG */
+
+#endif /* CONFIG_MPC512x_FEC */
--- /dev/null
+/*
+ * (C) Copyright 2003 - 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Derived from the MPC8xx driver's header file.
+ */
+
+#ifndef __MPC512X_FEC_H
+#define __MPC512X_FEC_H
+
+#include <common.h>
+#include <mpc512x.h>
+
+typedef unsigned long uint32;
+typedef unsigned short uint16;
+typedef unsigned char uint8;
+
+typedef struct ethernet_register_set {
+
+/* [10:2]addr = 00 */
+
+/* Control and status Registers (offset 000-1FF) */
+
+ volatile uint32 fec_id; /* MBAR_ETH + 0x000 */
+ volatile uint32 ievent; /* MBAR_ETH + 0x004 */
+ volatile uint32 imask; /* MBAR_ETH + 0x008 */
+
+ volatile uint32 RES0[1]; /* MBAR_ETH + 0x00C */
+ volatile uint32 r_des_active; /* MBAR_ETH + 0x010 */
+ volatile uint32 x_des_active; /* MBAR_ETH + 0x014 */
+
+ volatile uint32 RES1[3]; /* MBAR_ETH + 0x018-020 */
+ volatile uint32 ecntrl; /* MBAR_ETH + 0x024 */
+
+ volatile uint32 RES2[6]; /* MBAR_ETH + 0x028-03C */
+ volatile uint32 mii_data; /* MBAR_ETH + 0x040 */
+ volatile uint32 mii_speed; /* MBAR_ETH + 0x044 */
+
+ volatile uint32 RES3[7]; /* MBAR_ETH + 0x048-060 */
+ volatile uint32 mib_control; /* MBAR_ETH + 0x064 */
+
+ volatile uint32 RES4[7]; /* MBAR_ETH + 0x068-80 */
+ volatile uint32 r_cntrl; /* MBAR_ETH + 0x084 */
+ volatile uint32 r_hash; /* MBAR_ETH + 0x088 */
+
+ volatile uint32 RES5[14]; /* MBAR_ETH + 0x08c-0C0 */
+ volatile uint32 x_cntrl; /* MBAR_ETH + 0x0C4 */
+
+ volatile uint32 RES6[7]; /* MBAR_ETH + 0x0C8-0E0 */
+ volatile uint32 paddr1; /* MBAR_ETH + 0x0E4 */
+ volatile uint32 paddr2; /* MBAR_ETH + 0x0E8 */
+ volatile uint32 op_pause; /* MBAR_ETH + 0x0EC */
+
+ volatile uint32 RES7[10]; /* MBAR_ETH + 0x0F0-114 */
+ volatile uint32 iaddr1; /* MBAR_ETH + 0x118 */
+ volatile uint32 iaddr2; /* MBAR_ETH + 0x11C */
+ volatile uint32 gaddr1; /* MBAR_ETH + 0x120 */
+ volatile uint32 gaddr2; /* MBAR_ETH + 0x124 */
+
+ volatile uint32 RES8[6]; /* MBAR_ETH + 0x128-13C */
+ volatile uint32 fifo_id; /* MBAR_ETH + 0x140 */
+ volatile uint32 x_wmrk; /* MBAR_ETH + 0x144 */
+ volatile uint32 RES9[1]; /* MBAR_ETH + 0x148 */
+ volatile uint32 r_bound; /* MBAR_ETH + 0x14C */
+ volatile uint32 r_fstart; /* MBAR_ETH + 0x150 */
+
+ volatile uint32 RES10[11]; /* MBAR_ETH + 0x154-17C */
+ volatile uint32 r_des_start; /* MBAR_ETH + 0x180 */
+ volatile uint32 x_des_start; /* MBAR_ETH + 0x184 */
+ volatile uint32 r_buff_size; /* MBAR_ETH + 0x188 */
+ volatile uint32 RES11[26]; /* MBAR_ETH + 0x18C-1F0 */
+ volatile uint32 dma_control; /* MBAR_ETH + 0x1F4 */
+ volatile uint32 RES12[2]; /* MBAR_ETH + 0x1F8-1FC */
+
+/* MIB COUNTERS (Offset 200-2FF) */
+
+ volatile uint32 rmon_t_drop; /* MBAR_ETH + 0x200 */
+ volatile uint32 rmon_t_packets; /* MBAR_ETH + 0x204 */
+ volatile uint32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */
+ volatile uint32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */
+ volatile uint32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */
+ volatile uint32 rmon_t_undersize; /* MBAR_ETH + 0x214 */
+ volatile uint32 rmon_t_oversize; /* MBAR_ETH + 0x218 */
+ volatile uint32 rmon_t_frag; /* MBAR_ETH + 0x21C */
+ volatile uint32 rmon_t_jab; /* MBAR_ETH + 0x220 */
+ volatile uint32 rmon_t_col; /* MBAR_ETH + 0x224 */
+ volatile uint32 rmon_t_p64; /* MBAR_ETH + 0x228 */
+ volatile uint32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */
+ volatile uint32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */
+ volatile uint32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */
+ volatile uint32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */
+ volatile uint32 rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */
+ volatile uint32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */
+ volatile uint32 rmon_t_octets; /* MBAR_ETH + 0x244 */
+ volatile uint32 ieee_t_drop; /* MBAR_ETH + 0x248 */
+ volatile uint32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */
+ volatile uint32 ieee_t_1col; /* MBAR_ETH + 0x250 */
+ volatile uint32 ieee_t_mcol; /* MBAR_ETH + 0x254 */
+ volatile uint32 ieee_t_def; /* MBAR_ETH + 0x258 */
+ volatile uint32 ieee_t_lcol; /* MBAR_ETH + 0x25C */
+ volatile uint32 ieee_t_excol; /* MBAR_ETH + 0x260 */
+ volatile uint32 ieee_t_macerr; /* MBAR_ETH + 0x264 */
+ volatile uint32 ieee_t_cserr; /* MBAR_ETH + 0x268 */
+ volatile uint32 ieee_t_sqe; /* MBAR_ETH + 0x26C */
+ volatile uint32 t_fdxfc; /* MBAR_ETH + 0x270 */
+ volatile uint32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */
+
+ volatile uint32 RES13[2]; /* MBAR_ETH + 0x278-27C */
+ volatile uint32 rmon_r_drop; /* MBAR_ETH + 0x280 */
+ volatile uint32 rmon_r_packets; /* MBAR_ETH + 0x284 */
+ volatile uint32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */
+ volatile uint32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */
+ volatile uint32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */
+ volatile uint32 rmon_r_undersize; /* MBAR_ETH + 0x294 */
+ volatile uint32 rmon_r_oversize; /* MBAR_ETH + 0x298 */
+ volatile uint32 rmon_r_frag; /* MBAR_ETH + 0x29C */
+ volatile uint32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */
+
+ volatile uint32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */
+
+ volatile uint32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */
+ volatile uint32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */
+ volatile uint32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */
+ volatile uint32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */
+ volatile uint32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */
+ volatile uint32 rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */
+ volatile uint32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */
+ volatile uint32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */
+ volatile uint32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */
+ volatile uint32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */
+ volatile uint32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */
+ volatile uint32 ieee_r_align; /* MBAR_ETH + 0x2D4 */
+ volatile uint32 r_macerr; /* MBAR_ETH + 0x2D8 */
+ volatile uint32 r_fdxfc; /* MBAR_ETH + 0x2DC */
+ volatile uint32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */
+
+ volatile uint32 RES14[6]; /* MBAR_ETH + 0x2E4-2FC */
+
+ volatile uint32 RES15[64]; /* MBAR_ETH + 0x300-3FF */
+} ethernet_regs;
+
+/* Receive & Transmit Buffer Descriptor definitions */
+typedef struct BufferDescriptor {
+ uint16 status;
+ uint16 dataLength;
+ uint32 dataPointer;
+} FEC_RBD;
+
+typedef struct {
+ uint16 status;
+ uint16 dataLength;
+ uint32 dataPointer;
+} FEC_TBD;
+
+/* private structure */
+typedef enum {
+ SEVENWIRE, /* 7-wire */
+ MII10, /* MII 10Mbps */
+ MII100 /* MII 100Mbps */
+} xceiver_type;
+
+/* BD Numer definitions */
+#define FEC_TBD_NUM 48 /* The user can adjust this value */
+#define FEC_RBD_NUM 32 /* The user can adjust this value */
+
+/* packet size limit */
+#define FEC_MAX_FRAME_LEN 1522 /* recommended default value */
+
+/* Buffer size must be evenly divisible by 16 */
+#define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf))
+
+typedef struct {
+ uint8 frame[FEC_BUFFER_SIZE];
+} mpc512x_frame;
+
+typedef struct {
+ FEC_RBD rbd[FEC_RBD_NUM]; /* RBD ring */
+ FEC_TBD tbd[FEC_TBD_NUM]; /* TBD ring */
+ mpc512x_frame recv_frames[FEC_RBD_NUM]; /* receive buff */
+} mpc512x_buff_descs;
+
+typedef struct {
+ ethernet_regs *eth;
+ xceiver_type xcv_type; /* transceiver type */
+ mpc512x_buff_descs *bdBase; /* BD rings and recv buffer */
+ uint16 rbdIndex; /* next receive BD to read */
+ uint16 tbdIndex; /* next transmit BD to send */
+ uint16 usedTbdIndex; /* next transmit BD to clean */
+ uint16 cleanTbdNum; /* the number of available transmit BDs */
+} mpc512x_fec_priv;
+
+/* RBD bits definitions */
+#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */
+#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */
+#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */
+#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */
+#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */
+#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */
+#define FEC_RBD_LG 0x0020 /* Frame length violation */
+#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */
+#define FEC_RBD_SH 0x0008 /* Short frame */
+#define FEC_RBD_CR 0x0004 /* CRC error */
+#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */
+#define FEC_RBD_TR 0x0001 /* Frame is truncated */
+#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
+ FEC_RBD_OV | FEC_RBD_TR)
+
+/* TBD bits definitions */
+#define FEC_TBD_READY 0x8000 /* Buffer is ready */
+#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */
+#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */
+#define FEC_TBD_TC 0x0400 /* Transmit the CRC */
+#define FEC_TBD_ABC 0x0200 /* Append bad CRC */
+
+/* MII-related definitios */
+#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */
+#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */
+#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */
+#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */
+#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */
+#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */
+#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */
+
+#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */
+#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */
+
+#endif /* __MPC512X_FEC_H */
projects / project / bcm63xx / u-boot.git / commitdiff