+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_APM_EMULATION=m
-CONFIG_ARCH_GUMSTIX=y
-# CONFIG_ARCH_LUBBOCK is not set
-CONFIG_ARCH_MTD_XIP=y
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_PXA_PALM is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_ARM=y
-# CONFIG_ARPD is not set
-CONFIG_ATA=m
-CONFIG_BITREVERSE=y
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_COMMON_CLKDEV=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_32=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_XSCALE=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DM9000 is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_EPOLL is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_DESIGNWARE is not set
-CONFIG_I2C=m
-CONFIG_I2C_PXA=m
-CONFIG_I2C_PXA_SLAVE=y
-CONFIG_IDE=m
-CONFIG_INOTIFY_USER=y
-CONFIG_INOTIFY=y
-CONFIG_IWMMXT=y
-# CONFIG_LEDS_GPIO is not set
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_MACH_ARCOM_ZEUS is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CAPC7117 is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_GUMSTIX_F is not set
-CONFIG_MACH_GUMSTIX_VERDEX=y
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_ICONTROL is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
-# CONFIG_MACH_RAUMFELD_RC is not set
-# CONFIG_MACH_RAUMFELD_SPEAKER is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_TAVOREVB3 is not set
-# CONFIG_MACH_VPAC270 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_MACH_ZIPIT2 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MFD_T7L66XB is not set
-CONFIG_MII=m
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI_PXA is not set
-CONFIG_MMC=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_XIP is not set
-# CONFIG_PACKET is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PATA_PCMCIA=m
-CONFIG_PCCARD=m
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PLAT_PXA=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM=y
-CONFIG_PXA27x=y
-# CONFIG_PXA_EZX is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_SA1100_WATCHDOG=m
-CONFIG_SCSI=m
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_PROC_FS is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO=m
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=m
-CONFIG_SMC911X=m
-CONFIG_SMC91X=m
-CONFIG_SMSC911X=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_SUSPEND is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TRIZEPS_PXA is not set
-CONFIG_UID16=y
-CONFIG_UNIX=m
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VLAN_8021Q is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-From 4f4bb58cba3a6c44e9f9f113609287d9d50be9c4 Mon Sep 17 00:00:00 2001
-From: Joseph Kortje <jpktech@rogers.com>
-Date: Wed, 28 Oct 2009 21:11:28 -0400
-Subject: [PATCH] [ARM] Gumstix Verdex Pro arch support
-
-add an option for Verdex Pro when ARCH_GUMSTIX is selected, and
-factor earlier Gumstix support into a seperate option
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- arch/arm/mach-pxa/Kconfig | 29 +-
- arch/arm/mach-pxa/Makefile | 3 +-
- arch/arm/mach-pxa/gumstix-verdex.c | 749 +++++++++++++++++++++++++++
- arch/arm/mach-pxa/include/mach/mfp-pxa27x.h | 1 +
- 4 files changed, 772 insertions(+), 10 deletions(-)
- create mode 100644 arch/arm/mach-pxa/gumstix-verdex.c
-
---- a/arch/arm/mach-pxa/Kconfig
-+++ b/arch/arm/mach-pxa/Kconfig
-@@ -116,23 +116,34 @@ config MACH_CAPC7117
- select PXA3xx
-
- config ARCH_GUMSTIX
-- bool "Gumstix XScale 255 boards"
-- select PXA25x
-+ bool "Gumstix boards"
- help
-- Say Y here if you intend to run this kernel on
-- Basix, Connex, ws-200ax, ws-400ax systems
-+ Say Y here if you intend to run this kernel on a
-+ gumstix computer.
-
--choice
-- prompt "Gumstix Carrier/Expansion Board"
- depends on ARCH_GUMSTIX
-
--config GUMSTIX_AM200EPD
-+config MACH_GUMSTIX_F
-+ bool "Gumstix Basix/Connex ..."
-+ depends on ARCH_GUMSTIX
-+ select PXA25x
-+
-+ choice
-+ prompt "Gumstix Carrier/Expansion Board"
-+ depends on MACH_GUMSTIX_F
-+
-+ config GUMSTIX_AM200EPD
- bool "Enable AM200EPD board support"
-
--config GUMSTIX_AM300EPD
-+ config GUMSTIX_AM300EPD
- bool "Enable AM300EPD board support"
-
--endchoice
-+ endchoice
-+
-+config MACH_GUMSTIX_VERDEX
-+ bool "Gumstix VERDEX ..."
-+ depends on ARCH_GUMSTIX
-+ select PXA27x
-
- config MACH_INTELMOTE2
- bool "Intel Mote 2 Platform"
---- a/arch/arm/mach-pxa/Makefile
-+++ b/arch/arm/mach-pxa/Makefile
-@@ -49,7 +49,8 @@ endif
- obj-$(CONFIG_MACH_EM_X270) += em-x270.o
- obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
- obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
--obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
-+obj-$(CONFIG_MACH_GUMSTIX_F) += gumstix.o
-+obj-$(CONFIG_MACH_GUMSTIX_VERDEX) += gumstix-verdex.o
- obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
- obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
- obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
---- /dev/null
-+++ b/arch/arm/mach-pxa/gumstix-verdex.c
-@@ -0,0 +1,747 @@
-+/*
-+ * linux/arch/arm/mach-pxa/gumstix-verdex.c
-+ *
-+ * Support for the Gumstix verdex motherboard.
-+ *
-+ * Original Author: Craig Hughes
-+ * Created: Feb 14, 2008
-+ * Copyright: Craig Hughes
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Implemented based on lubbock.c by Nicolas Pitre and code from Craig
-+ * Hughes
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/i2c/tsc2007.h>
-+
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/sizes.h>
-+#include <asm/io.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+#include <asm/mach/flash.h>
-+
-+#include <mach/mmc.h>
-+#include <mach/udc.h>
-+#include <mach/pxafb.h>
-+#include <mach/ohci.h>
-+#include <plat/i2c.h>
-+#include <mach/pxa27x.h>
-+#include <mach/pxa27x-udc.h>
-+#include <mach/gpio.h>
-+
-+#include <mach/gumstix.h>
-+
-+#include "generic.h"
-+
-+#include <linux/delay.h>
-+
-+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-+
-+#include <linux/smsc911x.h>
-+
-+static struct resource verdex_smsc911x_resources[] = {
-+ [0] = {
-+ .name = "smsc911x-memory",
-+ .start = PXA_CS1_PHYS,
-+ .end = PXA_CS1_PHYS + 0x000fffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_GPIO(GPIO_GUMSTIX_ETH0),
-+ .end = IRQ_GPIO(GPIO_GUMSTIX_ETH0),
-+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-+ },
-+};
-+
-+static struct smsc911x_platform_config verdex_smsc911x_config = {
-+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-+ .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
-+ .phy_interface = PHY_INTERFACE_MODE_MII,
-+};
-+
-+static struct platform_device verdex_smsc911x_device = {
-+ .name = "smsc911x",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(verdex_smsc911x_resources),
-+ .resource = verdex_smsc911x_resources,
-+ .dev = {
-+ .platform_data = &verdex_smsc911x_config,
-+ },
-+};
-+
-+static void __init verdex_init_smsc911x(void)
-+{
-+
-+ printk(KERN_INFO "Initializing Gumstix verdex smsc911x\n");
-+
-+ if (gpio_request(GPIO_GUMSTIX_ETH0_RST, "SMSC911x_ETH0_RST") != 0) {
-+ printk(KERN_ERR "could not obtain gpio for SMSC911x_ETH0_RST\n");
-+ goto err_request_gpio_eth0_rst;
-+ }
-+
-+ if (gpio_request(GPIO_GUMSTIX_ETH0, "SMSC911x_ETH0_IRQ") != 0) {
-+ printk(KERN_ERR "could not obtain gpio for SMSC911x_ETH0_IRQ\n");
-+ goto err_request_gpio_eth0_irq;
-+ }
-+
-+ if (gpio_direction_output(GPIO_GUMSTIX_ETH0_RST, 0) != 0) {
-+ printk(KERN_ERR "could not set SMSC911x_ETH0_RST pin to output\n");
-+ goto err_dir;
-+ }
-+
-+ gpio_set_value(GPIO_GUMSTIX_ETH0_RST, 0);
-+
-+ msleep(500); // Hold RESET for at least 200ms
-+
-+ gpio_set_value(GPIO_GUMSTIX_ETH0_RST, 1);
-+
-+ msleep(50);
-+
-+ if (gpio_direction_input(GPIO_GUMSTIX_ETH0) != 0) {
-+ printk(KERN_ERR "could not set SMSC911x_ETH0_IRQ pin to input\n");
-+ goto err_dir;
-+ }
-+
-+ gpio_export(GPIO_GUMSTIX_ETH0, 0);
-+ platform_device_register(&verdex_smsc911x_device);
-+ return;
-+
-+err_dir:
-+ gpio_free(GPIO_GUMSTIX_ETH0_RST);
-+
-+err_request_gpio_eth0_irq:
-+ gpio_free(GPIO_GUMSTIX_ETH0);
-+
-+err_request_gpio_eth0_rst:
-+ return;
-+}
-+
-+#else
-+static void __init verdex_init_smsc911x(void) { return; }
-+#endif
-+
-+static unsigned long verdex_pin_config[] = {
-+ /* MMC */
-+ GPIO32_MMC_CLK,
-+ GPIO112_MMC_CMD,
-+ GPIO92_MMC_DAT_0,
-+ GPIO109_MMC_DAT_1,
-+ GPIO110_MMC_DAT_2,
-+ GPIO111_MMC_DAT_3,
-+
-+ /* BTUART */
-+ GPIO42_BTUART_RXD,
-+ GPIO43_BTUART_TXD,
-+ GPIO44_BTUART_CTS,
-+ GPIO45_BTUART_RTS,
-+
-+ /* STUART */
-+ GPIO46_STUART_RXD,
-+ GPIO47_STUART_TXD,
-+
-+ /* FFUART */
-+ GPIO34_FFUART_RXD,
-+ GPIO39_FFUART_TXD,
-+
-+ /* SSP 2 */
-+ GPIO19_SSP2_SCLK,
-+ GPIO14_SSP2_SFRM,
-+ GPIO13_SSP2_TXD,
-+ GPIO11_SSP2_RXD,
-+
-+ /* SDRAM and local bus */
-+ GPIO49_nPWE,
-+ GPIO15_nCS_1,
-+
-+ /* I2C */
-+ GPIO117_I2C_SCL,
-+ GPIO118_I2C_SDA,
-+
-+ /* PWM 0 */
-+ GPIO16_PWM0_OUT,
-+
-+ /* BRIGHTNESS */
-+ GPIO17_PWM1_OUT,
-+
-+ /* LCD */
-+ GPIO58_LCD_LDD_0,
-+ GPIO59_LCD_LDD_1,
-+ GPIO60_LCD_LDD_2,
-+ GPIO61_LCD_LDD_3,
-+ GPIO62_LCD_LDD_4,
-+ GPIO63_LCD_LDD_5,
-+ GPIO64_LCD_LDD_6,
-+ GPIO65_LCD_LDD_7,
-+ GPIO66_LCD_LDD_8,
-+ GPIO67_LCD_LDD_9,
-+ GPIO68_LCD_LDD_10,
-+ GPIO69_LCD_LDD_11,
-+ GPIO70_LCD_LDD_12,
-+ GPIO71_LCD_LDD_13,
-+ GPIO72_LCD_LDD_14,
-+ GPIO73_LCD_LDD_15,
-+ GPIO74_LCD_FCLK,
-+ GPIO75_LCD_LCLK,
-+ GPIO76_LCD_PCLK,
-+#ifdef CONFIG_FB_PXA_SHARP_LQ043_PSP
-+ /* DISP must be always high while screen is on */
-+ /* Done below in verdex_init */
-+#else
-+ GPIO77_LCD_BIAS,
-+#endif
-+
-+};
-+
-+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-+
-+static unsigned long gpio_ntschg_0[] = {
-+ GPIO104_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nCD_0_MD);
-+};
-+
-+static unsigned long gpio_ntschg_1[] = {
-+ GPIO18_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nSTSCHG_1_MD);
-+ GPIO36_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nCD_1_MD);
-+ GPIO27_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_1_MD);
-+};
-+
-+static unsigned long gpio_prdy_nbsy_old[] = {
-+ GPIO111_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nSTSCHG_0_MD);
-+ GPIO109_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_0_OLD_MD);
-+};
-+
-+static unsigned long gpio_prdy_nbsy[] = {
-+ GPIO96_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_0_MD);
-+};
-+
-+static unsigned long gpio_nhw_init[] = {
-+ GPIO48_nPOE, // pxa_gpio_mode(GPIO_GUMSTIX_nPOE_MD);
-+ GPIO102_nPCE_1, // pxa_gpio_mode(GPIO_GUMSTIX_nPCE_1_MD);
-+ GPIO105_nPCE_2, // pxa_gpio_mode(GPIO_GUMSTIX_nPCE_2_MD);
-+ GPIO104_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nCD_0_MD);
-+
-+ GPIO49_nPWE, // pxa_gpio_mode(GPIO_GUMSTIX_nPWE_MD);
-+ GPIO50_nPIOR, // pxa_gpio_mode(GPIO_GUMSTIX_nPIOR_MD);
-+ GPIO51_nPIOW, // pxa_gpio_mode(GPIO_GUMSTIX_nPIOW_MD);
-+ GPIO79_PSKTSEL, // pxa_gpio_mode(GPIO_GUMSTIX_pSKTSEL_MD);
-+ GPIO55_nPREG, // pxa_gpio_mode(GPIO_GUMSTIX_nPREG_MD);
-+ GPIO56_nPWAIT, // pxa_gpio_mode(GPIO_GUMSTIX_nPWAIT_MD);
-+ GPIO57_nIOIS16, // pxa_gpio_mode(GPIO_GUMSTIX_nIOIS16_MD);
-+};
-+
-+static int net_cf_vx_mode = 0;
-+static int pcmcia_cf_nr = 2;
-+
-+inline void __init gumstix_pcmcia_cpld_clk(void)
-+{
-+ GPCR(GPIO_GUMSTIX_nPOE) = GPIO_bit(GPIO_GUMSTIX_nPOE);
-+ GPSR(GPIO_GUMSTIX_nPOE) = GPIO_bit(GPIO_GUMSTIX_nPOE);
-+}
-+
-+inline unsigned char __init gumstix_pcmcia_cpld_read_bits(int bits)
-+{
-+ unsigned char result = 0;
-+ unsigned int shift = 0;
-+ while(bits--)
-+ {
-+ result |= !!(GPLR(GPIO_GUMSTIX_nCD_0) & GPIO_bit(GPIO_GUMSTIX_nCD_0)) << shift;
-+ shift ++;
-+ gumstix_pcmcia_cpld_clk();
-+ }
-+ printk("CPLD responded with: %02x\n",result);
-+ return result;
-+}
-+
-+/* We use the CPLD on the CF-CF card to read a value from a shift register. If we can read that
-+ * magic sequence, then we have 2 CF cards; otherwise we assume just one
-+ * The CPLD will send the value of the shift register on GPIO11 (the CD line for slot 0)
-+ * when RESET is held in reset. We use GPIO48 (nPOE) as a clock signal,
-+ * GPIO52/53 (card enable for both cards) to control read/write to the shift register
-+ */
-+static void __init gumstix_count_cards(void)
-+{
-+
-+ if ((gpio_request(GPIO_GUMSTIX_nPOE, "GPIO_GUMSTIX_nPOE") == 0) &&
-+ (gpio_direction_output(GPIO_GUMSTIX_nPOE, 1) == 0))
-+ gpio_export(GPIO_GUMSTIX_nPOE, 0);
-+ else
-+ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nPOE\n");
-+
-+ if ((gpio_request(GPIO_GUMSTIX_nPCE_1, "GPIO_GUMSTIX_nPCE_1") == 0) &&
-+ (gpio_direction_output(GPIO_GUMSTIX_nPCE_1, 1) == 0))
-+ gpio_export(GPIO_GUMSTIX_nPCE_1, 0);
-+ else
-+ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nPCE_1\n");
-+
-+ if ((gpio_request(GPIO_GUMSTIX_nPCE_2, "GPIO_GUMSTIX_nPCE_2") == 0) &&
-+ (gpio_direction_output(GPIO_GUMSTIX_nPCE_2, 1) == 0))
-+ gpio_export(GPIO_GUMSTIX_nPCE_2, 0);
-+ else
-+ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nPCE_2\n");
-+
-+ if ((gpio_request(GPIO_GUMSTIX_nCD_0, "GPIO_GUMSTIX_nCD_0") == 0) &&
-+ (gpio_direction_input(GPIO_GUMSTIX_nCD_0) == 0))
-+ gpio_export(GPIO_GUMSTIX_nCD_0, 0);
-+ else
-+ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nCD_0\n");
-+
-+ if (net_cf_vx_mode) {
-+ if ((gpio_request(GPIO_GUMSTIX_CF_OLD_RESET, "GPIO_GUMSTIX_CF_OLD_RESET") == 0) &&
-+ (gpio_direction_output(GPIO_GUMSTIX_CF_OLD_RESET, 1) == 0)) {
-+ gpio_export(GPIO_GUMSTIX_CF_OLD_RESET, 0);
-+ } else {
-+ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_CF_OLD_RESET\n");
-+ }
-+ } else {
-+ if ((gpio_request(GPIO_GUMSTIX_CF_RESET, "GPIO_GUMSTIX_CF_RESET") == 0) &&
-+ (gpio_direction_output(GPIO_GUMSTIX_CF_RESET, 1) == 0)) {
-+ gpio_export(GPIO_GUMSTIX_CF_RESET, 0);
-+ } else {
-+ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_CF_RESET\n");
-+ }
-+ }
-+
-+ // Setup the shift register
-+ GPSR(GPIO_GUMSTIX_nPCE_1) = GPIO_bit(GPIO_GUMSTIX_nPCE_1);
-+ GPCR(GPIO_GUMSTIX_nPCE_2) = GPIO_bit(GPIO_GUMSTIX_nPCE_2);
-+
-+ // Tick the clock to program the shift register
-+ gumstix_pcmcia_cpld_clk();
-+
-+ // Now set shift register into read mode
-+ GPCR(GPIO_GUMSTIX_nPCE_1) = GPIO_bit(GPIO_GUMSTIX_nPCE_1);
-+ GPSR(GPIO_GUMSTIX_nPCE_2) = GPIO_bit(GPIO_GUMSTIX_nPCE_2);
-+
-+ // We can read the bits now -- 0xC2 means "Dual compact flash"
-+ if(gumstix_pcmcia_cpld_read_bits(8) != 0xC2)
-+ {
-+ // We do not have 2 CF slots
-+ pcmcia_cf_nr = 1;
-+ }
-+
-+ udelay(50);
-+
-+ if (net_cf_vx_mode) {
-+ gpio_set_value(GPIO_GUMSTIX_CF_OLD_RESET, 0);
-+ gpio_free(GPIO_GUMSTIX_CF_OLD_RESET);
-+ } else {
-+ gpio_set_value(GPIO_GUMSTIX_CF_RESET, 0);
-+ gpio_free(GPIO_GUMSTIX_CF_RESET);
-+ }
-+
-+ printk(KERN_INFO "found %d CF slots\n", pcmcia_cf_nr);
-+
-+ gpio_free(GPIO_GUMSTIX_nPCE_2);
-+ gpio_free(GPIO_GUMSTIX_nPCE_1);
-+ gpio_free(GPIO_GUMSTIX_nPOE);
-+ return;
-+}
-+
-+#define SMC_IO_EXTENT 16
-+#define BANK_SELECT 14
-+
-+static void __init verdex_pcmcia_pin_config(void)
-+{
-+ struct resource *res;
-+ void *network_controller_memory;
-+ struct platform_device *pdev = &verdex_smsc911x_device;
-+
-+ printk(KERN_INFO "Initializing Gumstix verdex pcmcia\n");
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (res == NULL) {
-+ printk(KERN_ERR "no memory resource defined\n");
-+ goto err_done;
-+ }
-+
-+ res = request_mem_region(res->start, SMC_IO_EXTENT, "smc91x probe");
-+ if (res == NULL) {
-+ printk(KERN_ERR "failed to request memory resource\n");
-+ goto err_done;
-+ }
-+
-+ // We check for the possibility of SMSC91c111 (reg base offset 0x300 from CS1 base)
-+ network_controller_memory = ioremap(res->start + 0x300, SMC_IO_EXTENT);
-+ if (network_controller_memory == NULL) {
-+ printk(KERN_ERR "failed to ioremap() registers\n");
-+ goto err_free_mem;
-+ }
-+
-+ // Look for the special 91c111 value in the bank select register
-+ if((0xff00 & readw(network_controller_memory+BANK_SELECT)) == 0x3300) {
-+ printk(KERN_INFO "Detected netCF-vx board: pcmcia using older GPIO configuration\n");
-+ net_cf_vx_mode = 1;
-+ } else {
-+ printk(KERN_INFO "Not netCF-vx board: pcmcia using newer GPIO configuration\n");
-+ net_cf_vx_mode = 0;
-+ }
-+
-+ iounmap(network_controller_memory);
-+err_free_mem:
-+ release_mem_region(res->start, SMC_IO_EXTENT);
-+err_done:
-+
-+ gumstix_count_cards(); // this can update pcmcia_cf_nr
-+
-+ // If pcmcia_cf_nr is 1 then we do not have 2 CF slots
-+ // Note: logic sequence was altered from previous kernel revs
-+ // so that this works as intended now.
-+ if (pcmcia_cf_nr != 0)
-+ {
-+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gpio_ntschg_0));
-+
-+ if(net_cf_vx_mode)
-+ pxa2xx_mfp_config(gpio_prdy_nbsy_old, 1);
-+ else
-+ pxa2xx_mfp_config(gpio_prdy_nbsy, 1);
-+
-+ } else {
-+ // Note: this reconfigures pin GPIO18 to be GPIO-IN so make
-+ // sure that this only gets done for the old dual slot board
-+ // since that pin is an active AF1 out-mode signal (RDY) on
-+ // newer boards and changing the pin mode on the newer boards
-+ // would result in memory corruption for the NIC (and hang during
-+ // PHY test).
-+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gpio_ntschg_1));
-+ }
-+
-+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gpio_nhw_init));
-+ return;
-+}
-+
-+int __init gumstix_get_cf_cards(void)
-+{
-+ return pcmcia_cf_nr;
-+}
-+EXPORT_SYMBOL(gumstix_get_cf_cards);
-+
-+#ifdef CONFIG_MACH_GUMSTIX_VERDEX
-+int __init gumstix_check_if_netCF_vx(void)
-+{
-+ return net_cf_vx_mode;
-+}
-+EXPORT_SYMBOL(gumstix_check_if_netCF_vx);
-+#endif
-+
-+#endif
-+
-+#if defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) || defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
-+static void gumstix_lcd_backlight(int on_or_off)
-+{
-+ int err;
-+ err = gpio_request(17, "LCD BACKLIGHT");
-+ if (err) {
-+ //pr_warning("Gumstix Verdex: Failed to request LCD Backlight gpio\n");
-+ return;
-+ }
-+
-+ if(on_or_off) {
-+ gpio_direction_input(17);
-+ } else {
-+ GPCR(17) = GPIO_bit(17);
-+ gpio_direction_output(17, 0);
-+ GPCR(17) = GPIO_bit(17);
-+ }
-+
-+ return;
-+}
-+#endif
-+
-+#ifdef CONFIG_FB_PXA_ALPS_CDOLLAR
-+static struct pxafb_mode_info gumstix_fb_mode = {
-+ .pixclock = 300000,
-+ .xres = 240,
-+ .yres = 320,
-+ .bpp = 16,
-+ .hsync_len = 2,
-+ .left_margin = 1,
-+ .right_margin = 1,
-+ .vsync_len = 3,
-+ .upper_margin = 0,
-+ .lower_margin = 0,
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+};
-+
-+static struct pxafb_mach_info gumstix_fb_info = {
-+ .modes = &gumstix_fb_mode,
-+ .num_modes = 1,
-+ .lccr0 = LCCR0_Pas | LCCR0_Sngl | LCCR0_Color,
-+ .lccr3 = LCCR3_PixFlEdg,
-+};
-+#elif defined(CONFIG_FB_PXA_SHARP_LQ043_PSP)
-+static struct pxafb_mode_info gumstix_fb_mode = {
-+ .pixclock = 110000,
-+ .xres = 480,
-+ .yres = 272,
-+ .bpp = 16,
-+ .hsync_len = 41,
-+ .left_margin = 2,
-+ .right_margin = 2,
-+ .vsync_len = 10,
-+ .upper_margin = 2,
-+ .lower_margin = 2,
-+ .sync = 0, // Hsync and Vsync both active low
-+};
-+
-+static struct pxafb_mach_info gumstix_fb_info = {
-+ .modes = &gumstix_fb_mode,
-+ .num_modes = 1,
-+ .lccr0 = LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
-+ .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | (0 << 30),
-+ .pxafb_backlight_power = &gumstix_lcd_backlight,
-+};
-+#elif defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
-+static struct pxafb_mode_info gumstix_fb_mode = {
-+ .pixclock = 108696, // 9.2MHz typical DOTCLK from datasheet
-+ .xres = 480,
-+ .hsync_len = 41, // HLW from datasheet: 41 typ
-+ .left_margin = 4, // HBP - HLW from datasheet: 45 - 41 = 4
-+ .right_margin = 8, // HFP from datasheet: 8 typ
-+ .yres = 272,
-+ .vsync_len = 10, // VLW from datasheet: 10 typ
-+ .upper_margin = 2, // VBP - VLW from datasheet: 12 - 10 = 2
-+ .lower_margin = 4, // VFP from datasheet: 4 typ
-+ .bpp = 16,
-+ .sync = 0, // Hsync and Vsync both active low
-+};
-+
-+static struct pxafb_mach_info gumstix_fb_info = {
-+ .modes = &gumstix_fb_mode,
-+ .num_modes = 1,
-+ .lccr0 = LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
-+ .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | (0 << 30),
-+ .pxafb_backlight_power = &gumstix_lcd_backlight,
-+};
-+#endif
-+
-+static struct platform_device verdex_audio_device = {
-+ .name = "pxa2xx-ac97",
-+ .id = -1,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+ &verdex_audio_device,
-+};
-+
-+/* PXA27x OHCI controller setup */
-+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-+static int ohci_verdex_init(struct device *dev)
-+{
-+ // Turn on port 2 in host mode
-+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-+
-+ /* See drivers/usb/host/ohci-pxa27x.c for further details but
-+ ENABLE_PORT_ALL flag is equivalent to using this old sequence:
-+ UHCHR = (UHCHR) &
-+ ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-+ */
-+ return 0;
-+}
-+
-+static struct pxaohci_platform_data verdex_ohci_platform_data = {
-+ .port_mode = PMM_PERPORT_MODE,
-+ .flags = ENABLE_PORT_ALL,
-+ .init = ohci_verdex_init,
-+};
-+
-+static void __init verdex_ohci_init(void)
-+{
-+ pxa_set_ohci_info(&verdex_ohci_platform_data);
-+}
-+#else
-+static void __init verdex_ohci_init(void) {
-+ printk(KERN_INFO "Gumstix verdex host usb ohci is disabled\n");
-+}
-+#endif
-+
-+
-+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-+static struct pxamci_platform_data verdex_mci_platform_data;
-+
-+static int verdex_mci_init(struct device *dev, irq_handler_t detect_int,
-+ void *data)
-+{
-+ /* GPIO setup for MMC on the 120-pin connector is done in verdex_init.
-+ * There is no card detect on a uSD connector so no interrupt to register.
-+ * There is no WP detect GPIO line either.
-+ */
-+
-+ return 0;
-+}
-+
-+static struct pxamci_platform_data verdex_mci_platform_data = {
-+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-+ .init = verdex_mci_init,
-+};
-+
-+static void __init verdex_mmc_init(void)
-+{
-+ pxa_set_mci_info(&verdex_mci_platform_data);
-+}
-+#else
-+static void __init verdex_mmc_init(void)
-+{
-+ printk(KERN_INFO "Gumstix verdex mmc disabled\n");
-+}
-+#endif
-+
-+#if defined(CONFIG_USB_GADGET_PXA2XX) || defined(CONFIG_USB_GADGET_PXA2XX_MODULE)
-+static struct pxa2xx_udc_mach_info verdex_udc_info __initdata = {
-+ .gpio_vbus = GPIO35,
-+ .gpio_pullup = GPIO41,
-+};
-+
-+static void __init verdex_udc_init(void)
-+{
-+ pxa_set_udc_info(&verdex_udc_info);
-+}
-+#else
-+static void __init verdex_udc_init(void)
-+{
-+ printk(KERN_INFO "Gumstix verdex udc is disabled\n");
-+}
-+#endif
-+
-+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-+
-+#if defined(CONFIG_TOUCHSCREEN_TSC2003) || defined(CONFIG_TOUCHSCREEN_TSC2003_MODULE)
-+
-+#define VERDEX_GPIO_PENDOWN 16
-+
-+static int tsc2003_init_platform_hw(void)
-+{
-+ return 0;
-+}
-+
-+static void tsc2003_exit_platform_hw(void)
-+{
-+ return;
-+}
-+
-+static void tsc2003_clear_penirq(void)
-+{
-+ return;
-+}
-+
-+static int tsc2003_get_pendown_state(void)
-+{
-+ return !gpio_get_value(VERDEX_GPIO_PENDOWN);
-+}
-+
-+static struct tsc2007_platform_data tsc2003_config = {
-+ .model = 2003,
-+ .x_plate_ohms = 100,
-+ .get_pendown_state = tsc2003_get_pendown_state,
-+ .clear_penirq = tsc2003_clear_penirq,
-+ .init_platform_hw = tsc2003_init_platform_hw,
-+ .exit_platform_hw = tsc2003_exit_platform_hw,
-+};
-+#endif
-+
-+static struct i2c_board_info __initdata verdex_i2c_board_info[] = {
-+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-+
-+ {
-+ I2C_BOARD_INFO("rtc-ds1307", 0x68),
-+ },
-+#endif
-+#if defined(CONFIG_TOUCHSCREEN_TSC2003) || defined(CONFIG_TOUCHSCREEN_TSC2003_MODULE)
-+ {
-+ I2C_BOARD_INFO("tsc2003", 0x48),
-+ .platform_data = &tsc2003_config,
-+ .irq = IRQ_GPIO(VERDEX_GPIO_PENDOWN),
-+ },
-+#endif
-+};
-+
-+static struct i2c_pxa_platform_data verdex_i2c_pwr_info = {
-+ .fast_mode = 1,
-+};
-+
-+static struct i2c_pxa_platform_data verdex_i2c_info = {
-+ .fast_mode = 1,
-+};
-+
-+static void __init verdex_i2c_init(void)
-+{
-+ printk(KERN_INFO "Initializing Gumstix verdex i2c\n");
-+
-+#if defined(CONFIG_TOUCHSCREEN_TSC2003) || defined(CONFIG_TOUCHSCREEN_TSC2003_MODULE)
-+ if ((gpio_request(VERDEX_GPIO_PENDOWN, "TSC2003_PENDOWN") == 0) &&
-+ (gpio_direction_input(VERDEX_GPIO_PENDOWN) == 0)) {
-+ gpio_export(VERDEX_GPIO_PENDOWN, 0);
-+ } else {
-+ printk(KERN_ERR "could not obtain gpio for TSC2003_PENDOWN\n");
-+ return;
-+ }
-+#endif
-+
-+ i2c_register_board_info(0, verdex_i2c_board_info,
-+ ARRAY_SIZE(verdex_i2c_board_info));
-+ pxa_set_i2c_info(&verdex_i2c_info);
-+ pxa27x_set_i2c_power_info(&verdex_i2c_pwr_info);
-+}
-+#else
-+static inline void verdex_i2c_init(void) {}
-+#endif
-+
-+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-+static void __init verdex_pcmcia_init(void)
-+{
-+ verdex_pcmcia_pin_config();
-+}
-+#else
-+static void __init verdex_pcmcia_init(void) {
-+ printk(KERN_INFO "Gumstix verdex pcmcia is disabled\n");
-+}
-+#endif
-+
-+
-+static void __init verdex_init(void)
-+{
-+ pxa2xx_mfp_config(ARRAY_AND_SIZE(verdex_pin_config));
-+
-+#ifdef CONFIG_FB_PXA_SHARP_LQ043_PSP
-+ /* DISP must be always high while screen is on */
-+ gpio_direction_output(GPIO77, 0);
-+ GPSR(GPIO77) = GPIO_bit(GPIO77);
-+#endif
-+ verdex_udc_init();
-+ verdex_mmc_init();
-+ verdex_ohci_init();
-+ verdex_i2c_init();
-+ verdex_init_smsc911x();
-+ verdex_pcmcia_init();
-+
-+#if defined(CONFIG_FB_PXA_ALPS_CDOLLAR) || defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) || defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
-+ printk(KERN_INFO "Initializing Gumstix verdex FB info\n");
-+ set_pxa_fb_info(&gumstix_fb_info);
-+#endif
-+ printk(KERN_INFO "Initializing Gumstix platform_add_devices\n");
-+ (void) platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+MACHINE_START(GUMSTIX, "Gumstix verdex")
-+ .boot_params = 0xa0000100, /* match u-boot bi_boot_params */
-+ .map_io = pxa_map_io,
-+ .init_irq = pxa27x_init_irq,
-+ .timer = &pxa_timer,
-+ .init_machine = verdex_init,
-+MACHINE_END
-+
---- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
-+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
-@@ -109,6 +109,7 @@
- #define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
- #define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
- #define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1)
-+#define GPIO105_nPCE_2 MFP_CFG_OUT(GPIO105, AF1, DRIVE_HIGH)
- #define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
- #define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
- #define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+++ /dev/null
-From eb92a178eceae4e5d18bbb442b8e44cb88457d60 Mon Sep 17 00:00:00 2001
-From: Joseph Kortje <jpktech@rogers.com>
-Date: Wed, 28 Oct 2009 21:25:57 -0400
-Subject: [PATCH] [ARM] Gumstix Verdex LCD config options
-
-add options to Kconfig for Verdex LCD support
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- drivers/video/Kconfig | 31 +++++++++++++++++++++++++++++++
- 1 files changed, 31 insertions(+), 0 deletions(-)
-
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -1822,6 +1822,37 @@ config FB_PXA
- say M here and read <file:Documentation/kbuild/modules.txt>.
-
- If unsure, say N.
-+choice
-+ depends on FB_PXA
-+ prompt "LCD Panel"
-+ default FB_PXA_SAMSUNG_LTE430WQ_F0C
-+
-+config FB_PXA_ALPS_CDOLLAR
-+ boolean "Chris Dollar's ALPS screen"
-+ ---help---
-+ Enable definitions (over-ridable on the kernel command line if
-+ "PXA LCD command line parameters" is also selected) for an ALPS
-+ screen which Chris Dollar uses
-+
-+config FB_PXA_SHARP_LQ043_PSP
-+ boolean "SHARP LQ043... series"
-+ ---help---
-+ Enable definitions (over-ridable on the kernel command line if
-+ "PXA LCD command line parameters" is also selected) for a SHARP
-+ LQ043... screen, such as the one used by the PSP. These screens are
-+ the ones normally sold by gumstix with its boards.
-+
-+config FB_PXA_SAMSUNG_LTE430WQ_F0C
-+ boolean "Samsung LTE430WQ-F0C (standard gumstix LCD)"
-+ ---help---
-+ Enable definitions for a Samsung LTE430WQ-F0C LCD panel, such as the ones resold
-+ by gumstix for use with their "LCD-Ready" boards.
-+
-+config FB_PXA_NONEOFTHEABOVE
-+ boolean "None of the above"
-+
-+endchoice
-+
-
- config FB_PXA_OVERLAY
- bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
+++ /dev/null
-From adb6abbe4e3bc17c20cdc70e4a4357f1633d4970 Mon Sep 17 00:00:00 2001
-From: Joseph Kortje <jpktech@rogers.com>
-Date: Wed, 28 Oct 2009 21:49:11 -0400
-Subject: [PATCH] [ARM] gumstix.h: Verdex Pro support
-
-Added a bunch of ifdefs to support both original gumstix boards
-as well as the Verdex Pro in gumstix.h
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- arch/arm/mach-pxa/include/mach/gumstix.h | 160 ++++++++++++++++++++++++------
- 1 files changed, 130 insertions(+), 30 deletions(-)
-
---- a/arch/arm/mach-pxa/include/mach/gumstix.h
-+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
-@@ -6,6 +6,9 @@
- * published by the Free Software Foundation.
- */
-
-+#if !defined(__ASM_ARCH_MFP_PXA27X_H) && !defined(__ASM_ARCH_MFP_PXA25X_H)
-+ #error You need to include either mfp-pxa27x.h or mfp-pxa25x.h
-+#endif
-
- /* BTRESET - Reset line to Bluetooth module, active low signal. */
- #define GPIO_GUMSTIX_BTRESET 7
-@@ -20,9 +23,18 @@ this moves to GPIO17 and GPIO37. */
- /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
- has detected a cable insertion; driven low otherwise. */
-
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+
- #define GPIO_GUMSTIX_USB_GPIOn 35
- #define GPIO_GUMSTIX_USB_GPIOx 41
-
-+#else
-+
-+#define GPIO_GUMSTIX_USB_GPIOn 100
-+#define GPIO_GUMSTIX_USB_GPIOx 27
-+
-+#endif
-+
- /* usb state change */
- #define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
-
-@@ -42,48 +54,136 @@ has detected a cable insertion; driven l
- * ETH_RST provides a hardware reset line to the ethernet chip
- * ETH is the IRQ line in from the ethernet chip to the PXA
- */
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
- #define GPIO_GUMSTIX_ETH0_RST 80
--#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
-+#define GPIO_GUMSTIX_ETH0 36
-+#else
-+#define GPIO_GUMSTIX_ETH0_RST 107
-+#define GPIO_GUMSTIX_ETH0 99
-+#endif
- #define GPIO_GUMSTIX_ETH1_RST 52
--#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
-+#define GPIO_GUMSTIX_ETH1 27
-
--#define GPIO_GUMSTIX_ETH0 36
-+#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
-+#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
- #define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN)
--#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0)
--#define GPIO_GUMSTIX_ETH1 27
- #define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN)
--#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1)
-
-+#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0)
-+#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1)
-
- /* CF reset line */
--#define GPIO8_RESET 8
-+#define GPIO8_CF_RESET 8
-+#define GPIO97_CF_RESET 97
-+#define GPIO110_CF_RESET 110
-+
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+#define GPIO_GUMSTIX_CF_RESET GPIO8_CF_RESET
-+#else
-+#define GPIO_GUMSTIX_CF_RESET GPIO97_CF_RESET
-+#endif
-+
-+#define GPIO_GUMSTIX_CF_OLD_RESET GPIO110_CF_RESET
-+
-+/* CF signals shared by both sockets */
-+#define GPIO_GUMSTIX_nPOE 48
-+#define GPIO_GUMSTIX_nPWE 49
-+#define GPIO_GUMSTIX_nPIOR 50
-+#define GPIO_GUMSTIX_nPIOW 51
-+
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+#define GPIO_GUMSTIX_nPCE_1 52
-+#define GPIO_GUMSTIX_nPCE_2 53
-+#define GPIO_GUMSTIX_pSKTSEL 54
-+#else
-+#define GPIO_GUMSTIX_nPCE_1 102
-+#define GPIO_GUMSTIX_nPCE_2 105
-+#define GPIO_GUMSTIX_pSKTSEL 79
-+#endif
-+
-+#define GPIO_GUMSTIX_nPREG 55
-+#define GPIO_GUMSTIX_nPWAIT 56
-+#define GPIO_GUMSTIX_nIOIS16 57
-+
-+/* Pin mode definitions correspond to mfp-pxa2[57]x.h */
-+#define GPIO_GUMSTIX_nPOE_MD GPIO48_nPOE
-+#define GPIO_GUMSTIX_nPWE_MD GPIO49_nPWE
-+#define GPIO_GUMSTIX_nPIOR_MD GPIO50_nPIOR
-+#define GPIO_GUMSTIX_nPIOW_MD GPIO51_nPIOW
-+
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+#define GPIO_GUMSTIX_nPCE_1_MD GPIO52_nPCE_1
-+#define GPIO_GUMSTIX_nPCE_2_MD GPIO53_nPCE_2
-+#define GPIO_GUMSTIX_pSKTSEL_MD GPIO54_pSKTSEL
-+#else
-+#define GPIO_GUMSTIX_nPCE_1_MD GPIO102_nPCE_1
-+#define GPIO_GUMSTIX_nPCE_2_MD GPIO105_nPCE_2
-+#define GPIO_GUMSTIX_pSKTSEL_MD GPIO79_pSKTSEL
-+#endif
-+
-+#define GPIO_GUMSTIX_nPREG_MD GPIO55_nPREG
-+#define GPIO_GUMSTIX_nPWAIT_MD GPIO56_nPWAIT
-+#define GPIO_GUMSTIX_nIOIS16_MD GPIO57_nIOIS16
-
- /* CF slot 0 */
--#define GPIO4_nBVD1 4
--#define GPIO4_nSTSCHG GPIO4_nBVD1
--#define GPIO11_nCD 11
--#define GPIO26_PRDY_nBSY 26
--#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG)
--#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD)
--#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY)
-+#define GPIO4_nBVD1_0 4
-+#define GPIO4_nSTSCHG_0 GPIO4_nBVD1_0
-+#define GPIO11_nCD_0 11
-+#define GPIO26_PRDY_nBSY_0 26
-+
-+#define GPIO111_nBVD1_0 111
-+#define GPIO111_nSTSCHG_0 GPIO111_nBVD1_0
-+#define GPIO104_nCD_0 104
-+#define GPIO96_PRDY_nBSY_0 96
-+#define GPIO109_PRDY_nBSY_0 109
-+
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+#define GPIO_GUMSTIX_nBVD1_0 GPIO4_nBVD1_0
-+#define GPIO_GUMSTIX_nSTSCHG_0 GPIO4_nSTSCHG_0
-+#define GPIO_GUMSTIX_nCD_0 GPIO11_nCD_0
-+#define GPIO_GUMSTIX_PRDY_nBSY_0 GPIO26_PRDY_nBSY_0
-+#else
-+#define GPIO_GUMSTIX_nBVD1_0 GPIO111_nBVD1_0
-+#define GPIO_GUMSTIX_nSTSCHG_0 GPIO111_nSTSCHG_0
-+#define GPIO_GUMSTIX_nCD_0 GPIO104_nCD_0
-+#define GPIO_GUMSTIX_PRDY_nBSY_0 GPIO96_PRDY_nBSY_0
-+#endif
-+
-+#define GPIO_GUMSTIX_PRDY_nBSY_0_OLD GPIO109_PRDY_nBSY_0
-+
-+#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO_GUMSTIX_nSTSCHG_0)
-+#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO_GUMSTIX_nCD_0)
-+#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO_GUMSTIX_PRDY_nBSY_0)
-+#define GUMSTIX_S0_PRDY_nBSY_OLD_IRQ IRQ_GPIO(GPIO_GUMSTIX_PRDY_nBSY_0_OLD)
-
- /* CF slot 1 */
--#define GPIO18_nBVD1 18
--#define GPIO18_nSTSCHG GPIO18_nBVD1
--#define GPIO36_nCD 36
--#define GPIO27_PRDY_nBSY 27
--#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG)
--#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD)
--#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY)
--
--/* CF GPIO line modes */
--#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN)
--#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT)
--#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN)
--#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN)
--#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN)
--#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN)
--#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN)
-+#define GPIO18_nBVD1_1 18
-+#define GPIO18_nSTSCHG_1 GPIO18_nBVD1_1
-+#define GPIO36_nCD_1 36
-+#define GPIO27_PRDY_nBSY_1 27
-+
-+#define GPIO_GUMSTIX_nBVD1_1 GPIO18_nBVD1_1
-+#define GPIO_GUMSTIX_nSTSCHG_1 GPIO18_nSTSCHG_1
-+#define GPIO_GUMSTIX_nCD_1 GPIO36_nCD_1
-+#define GPIO_GUMSTIX_PRDY_nBSY_1 GPIO27_PRDY_nBSY_1
-+
-+#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO_GUMSTIX_nSTSCHG_1)
-+#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO_GUMSTIX_nCD_1)
-+#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO_GUMSTIX_PRDY_nBSY_1)
-+
-+/* CF GPIO line modes - correspond to mfp-pxa2[57]x.h */
-+#define GPIO_GUMSTIX_CF_RESET_MD ( GPIO_GUMSTIX_CF_RESET | GPIO_OUT )
-+#define GPIO_GUMSTIX_CF_OLD_RESET_MD ( GPIO_GUMSTIX_CF_OLD_RESET | GPIO_OUT )
-+
-+#define GPIO_GUMSTIX_nSTSCHG_0_MD GPIO111_GPIO
-+#define GPIO_GUMSTIX_nCD_0_MD GPIO104_GPIO
-+
-+#define GPIO_GUMSTIX_PRDY_nBSY_0_MD GPIO96_GPIO
-+#define GPIO_GUMSTIX_PRDY_nBSY_0_OLD_MD GPIO109_GPIO
-+
-+#define GPIO_GUMSTIX_nSTSCHG_1_MD GPIO18_GPIO
-+#define GPIO_GUMSTIX_nCD_1_MD GPIO36_GPIO
-+#define GPIO_GUMSTIX_PRDY_nBSY_1_MD GPIO27_GPIO
-
- /* for expansion boards that can't be programatically detected */
- extern int am200_init(void);
+++ /dev/null
-From 7645a459feb02f7aae4c3a5724b7800495d1b659 Mon Sep 17 00:00:00 2001
-From: Bobby Powers <bobbypowers@gmail.com>
-Date: Wed, 28 Oct 2009 22:41:31 -0400
-Subject: [PATCH] [ARM] smsc911x: Verdex Pro support
-
-Basically Joseph Kortje's patch, cleaned up to apply to Linus's
-tree. Some of the smsc911x.c had been applied already
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- drivers/net/smsc911x.c | 50 +++++++++++++++++++++++++++++++++++++--------
- drivers/net/smsc911x.h | 2 +-
- include/linux/smsc911x.h | 11 ++++++++++
- 3 files changed, 53 insertions(+), 10 deletions(-)
-
---- a/drivers/net/smsc911x.c
-+++ b/drivers/net/smsc911x.c
-@@ -1189,7 +1189,7 @@ static int smsc911x_open(struct net_devi
- SMSC_WARNING(IFUP,
- "Timed out waiting for EEPROM busy bit to clear");
-
-- smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
-+ smsc911x_reg_write(pdata, GPIO_CFG, GPIO_CFG_LED1_EN_ | GPIO_CFG_LED2_EN_ | (1 << 20));
-
- /* The soft reset above cleared the device's MAC address,
- * restore it from local copy (set in probe) */
-@@ -1201,8 +1201,8 @@ static int smsc911x_open(struct net_devi
- smsc911x_reg_write(pdata, INT_EN, 0);
- smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
-
-- /* Set interrupt deassertion to 100uS */
-- intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
-+ /* Set interrupt deassertion to 22*10uS */
-+ intcfg = ((22 << 24) | INT_CFG_IRQ_EN_);
-
- if (pdata->config.irq_polarity) {
- SMSC_TRACE(IFUP, "irq polarity: active high");
-@@ -1228,7 +1228,7 @@ static int smsc911x_open(struct net_devi
- temp |= INT_EN_SW_INT_EN_;
- smsc911x_reg_write(pdata, INT_EN, temp);
-
-- timeout = 1000;
-+ timeout = 2000;
- while (timeout--) {
- if (pdata->software_irq_signal)
- break;
-@@ -1946,6 +1946,38 @@ static int __devexit smsc911x_drv_remove
- return 0;
- }
-
-+static inline unsigned int is_gumstix_oui(u8 *addr)
-+{
-+ return (addr[0] == 0x00 && addr[1] == 0x15 && addr[2] == 0xC9);
-+}
-+
-+/**
-+ * gen_serial_ether_addr - Generate software assigned Ethernet address
-+ * based on the system_serial number
-+ * @addr: Pointer to a six-byte array containing the Ethernet address
-+ *
-+ * Generate an Ethernet address (MAC) that is not multicast
-+ * and has the local assigned bit set, keyed on the system_serial
-+ */
-+static inline void gen_serial_ether_addr(u8 *addr)
-+{
-+ static u8 ether_serial_digit = 0;
-+ addr [0] = system_serial_high >> 8;
-+ addr [1] = system_serial_high;
-+ addr [2] = system_serial_low >> 24;
-+ addr [3] = system_serial_low >> 16;
-+ addr [4] = system_serial_low >> 8;
-+ addr [5] = (system_serial_low & 0xc0) | /* top bits are from system serial */
-+ (1 << 4) | /* 2 bits identify interface type 1=ether, 2=usb, 3&4 undef */
-+ ((ether_serial_digit++) & 0x0f); /* 15 possible interfaces of each type */
-+
-+ if(!is_gumstix_oui(addr))
-+ {
-+ addr [0] &= 0xfe; /* clear multicast bit */
-+ addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
-+ }
-+}
-+
- static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
- {
- struct net_device *dev;
-@@ -2082,11 +2114,11 @@ static int __devinit smsc911x_drv_probe(
- SMSC_TRACE(PROBE,
- "Mac Address is read from LAN911x EEPROM");
- } else {
-- /* eeprom values are invalid, generate random MAC */
-- random_ether_addr(dev->dev_addr);
-- smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
-- SMSC_TRACE(PROBE,
-- "MAC Address is set to random_ether_addr");
-+ /* eeprom values are invalid, generate MAC from serial number */
-+ gen_serial_ether_addr(dev->dev_addr);
-+ smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
-+ SMSC_TRACE(PROBE,
-+ "MAC Address is derived from system serial number");
- }
- }
-
+++ /dev/null
-From 76a102bd5c9d792db19c6c72eafdecea0311a0c9 Mon Sep 17 00:00:00 2001
-From: Craig Hughes <craig@gumstix.com>
-Date: Fri, 30 Oct 2009 14:16:27 -0400
-Subject: [PATCH] [ARM] pxa: Gumstix Verdex PCMCIA support
-
-Needed for the Libertas CS wireless device.
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- drivers/pcmcia/Kconfig | 3 +-
- drivers/pcmcia/Makefile | 3 +
- drivers/pcmcia/pxa2xx_gumstix.c | 194 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 199 insertions(+), 1 deletions(-)
- create mode 100644 drivers/pcmcia/pxa2xx_gumstix.c
-
---- a/drivers/pcmcia/Kconfig
-+++ b/drivers/pcmcia/Kconfig
-@@ -215,7 +215,7 @@ config PCMCIA_PXA2XX
- depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
- || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
- || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
-- || MACH_VPAC270 || MACH_BALLOON3)
-+ || MACH_VPAC270 || MACH_BALLOON3 || ARCH_GUMSTIX)
- select PCMCIA_SOC_COMMON
- help
- Say Y here to include support for the PXA2xx PCMCIA controller
---- a/drivers/pcmcia/Makefile
-+++ b/drivers/pcmcia/Makefile
-@@ -71,6 +71,9 @@ pxa2xx-obj-$(CONFIG_MACH_STARGATE2) +=
- pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
- pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
-
-+pxa2xx-obj-$(CONFIG_MACH_GUMSTIX_VERDEX) += pxa2xx_cs.o
-+pxa2xx_cs-objs := pxa2xx_gumstix.o
-+
- obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
-
- obj-$(CONFIG_PCMCIA_XXS1500) += xxs1500_ss.o
---- /dev/null
-+++ b/drivers/pcmcia/pxa2xx_gumstix.c
-@@ -0,0 +1,194 @@
-+/*
-+ * linux/drivers/pcmcia/pxa2xx_gumstix.c
-+ *
-+ * Gumstix PCMCIA specific routines. Based on Mainstone
-+ *
-+ * Copyright 2004, Craig Hughes <craig@gumstix.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/gpio.h>
-+
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+
-+#include <pcmcia/ss.h>
-+
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+
-+#ifdef CONFIG_MACH_GUMSTIX_VERDEX
-+#include <mach/pxa27x.h>
-+#else
-+#include <mach/pxa27x.h>
-+#endif
-+
-+#include <asm/io.h>
-+#include <mach/gpio.h>
-+#include <mach/gumstix.h>
-+#include "soc_common.h"
-+
-+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-+
-+static struct pcmcia_irqs gumstix_pcmcia_irqs0[] = {
-+ { 0, GUMSTIX_S0_nCD_IRQ, "CF0 nCD" },
-+ { 0, GUMSTIX_S0_nSTSCHG_IRQ, "CF0 nSTSCHG" },
-+};
-+
-+static struct pcmcia_irqs gumstix_pcmcia_irqs1[] = {
-+ { 1, GUMSTIX_S1_nCD_IRQ, "CF1 nCD" },
-+ { 1, GUMSTIX_S1_nSTSCHG_IRQ, "CF1 nSTSCHG" },
-+};
-+
-+
-+static int net_cf_vx_mode = 0;
-+
-+static int gumstix_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-+{
-+/* Note: The verdex_pcmcia_pin_config is moved to gumstix_verdex.c in order to use mfp_pxa2xx_config
-+ for board-specific pin configuration instead of the old deprecated pxa_gpio_mode function. Thus,
-+ only the IRQ init is still needed to be done here. */
-+ skt->irq = (skt->nr == 0) ? ((net_cf_vx_mode == 0) ? GUMSTIX_S0_PRDY_nBSY_IRQ : GUMSTIX_S0_PRDY_nBSY_OLD_IRQ) : GUMSTIX_S1_PRDY_nBSY_IRQ;
-+
-+ return (skt->nr == 0) ? soc_pcmcia_request_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0)) :
-+ soc_pcmcia_request_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
-+}
-+
-+static void gumstix_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-+{
-+ if(skt->nr == 0)
-+ {
-+ soc_pcmcia_free_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0));
-+ } else {
-+ soc_pcmcia_free_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
-+ }
-+
-+ if (net_cf_vx_mode) {
-+ gpio_free(GPIO_GUMSTIX_CF_OLD_RESET);
-+ } else {
-+ gpio_free(GPIO_GUMSTIX_CF_RESET);
-+ }
-+
-+}
-+
-+static void gumstix_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-+ struct pcmcia_state *state)
-+{
-+ unsigned int cd, prdy_nbsy, nbvd1;
-+ if(skt->nr == 0)
-+ {
-+ cd = GPIO_GUMSTIX_nCD_0;
-+ if(net_cf_vx_mode)
-+ prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_0_OLD;
-+ else
-+ prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_0;
-+ nbvd1 = GPIO_GUMSTIX_nBVD1_0;
-+ } else {
-+ cd = GPIO_GUMSTIX_nCD_1;
-+ prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_1;
-+ nbvd1 = GPIO_GUMSTIX_nBVD1_1;
-+ }
-+ state->detect = !(GPLR(cd) & GPIO_bit(cd));
-+ state->ready = !!(GPLR(prdy_nbsy) & GPIO_bit(prdy_nbsy));
-+ state->bvd1 = !!(GPLR(nbvd1) & GPIO_bit(nbvd1));
-+ state->bvd2 = 1;
-+ state->vs_3v = 0;
-+ state->vs_Xv = 0;
-+ state->wrprot = 0;
-+}
-+
-+static int gumstix_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-+ const socket_state_t *state)
-+{
-+ return 0;
-+}
-+
-+static void gumstix_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-+{
-+ if(skt->nr) {
-+ soc_pcmcia_enable_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0));
-+ } else {
-+ soc_pcmcia_enable_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
-+ }
-+}
-+
-+static void gumstix_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-+{
-+ if(skt->nr) {
-+ soc_pcmcia_disable_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0));
-+ } else {
-+ soc_pcmcia_disable_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
-+ }
-+}
-+
-+static struct pcmcia_low_level gumstix_pcmcia_ops = {
-+ .owner = THIS_MODULE,
-+ .hw_init = gumstix_pcmcia_hw_init,
-+ .hw_shutdown = gumstix_pcmcia_hw_shutdown,
-+ .socket_state = gumstix_pcmcia_socket_state,
-+ .configure_socket = gumstix_pcmcia_configure_socket,
-+ .socket_init = gumstix_pcmcia_socket_init,
-+ .socket_suspend = gumstix_pcmcia_socket_suspend,
-+ .nr = 2,
-+};
-+
-+static struct platform_device *gumstix_pcmcia_device;
-+
-+extern int __init gumstix_get_cf_cards(void);
-+
-+#ifdef CONFIG_MACH_GUMSTIX_VERDEX
-+extern int __init gumstix_check_if_netCF_vx(void);
-+#endif
-+
-+static int __init gumstix_pcmcia_init(void)
-+{
-+ int ret;
-+
-+#ifdef CONFIG_MACH_GUMSTIX_VERDEX
-+ net_cf_vx_mode = gumstix_check_if_netCF_vx();
-+#endif
-+
-+ gumstix_pcmcia_ops.nr = gumstix_get_cf_cards();
-+
-+ gumstix_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-+ if (!gumstix_pcmcia_device)
-+ return -ENOMEM;
-+
-+ ret = platform_device_add_data(gumstix_pcmcia_device, &gumstix_pcmcia_ops,
-+ sizeof(gumstix_pcmcia_ops));
-+
-+ if (ret == 0) {
-+ printk(KERN_INFO "Registering gumstix PCMCIA interface.\n");
-+ ret = platform_device_add(gumstix_pcmcia_device);
-+ }
-+
-+ if (ret)
-+ platform_device_put(gumstix_pcmcia_device);
-+
-+ return ret;
-+}
-+
-+static void __exit gumstix_pcmcia_exit(void)
-+{
-+ /*
-+ * This call is supposed to free our gumstix_pcmcia_device.
-+ * Unfortunately platform_device don't have a free method, and
-+ * we can't assume it's free of any reference at this point so we
-+ * can't free it either.
-+ */
-+ platform_device_unregister(gumstix_pcmcia_device);
-+}
-+
-+fs_initcall(gumstix_pcmcia_init);
-+module_exit(gumstix_pcmcia_exit);
-+
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From ddd30dbf3cfd805b0de99fc581d0fa1cc7236ef9 Mon Sep 17 00:00:00 2001
-From: Bobby Powers <bobbypowers@gmail.com>
-Date: Fri, 13 Nov 2009 01:33:05 -0500
-Subject: [PATCH] pxa: define smsc911x structures for pcmcia too
-
-The gumstix pcmcia support (which the wireless driver uses) needs
-to know about the smsc911x platform device even if smsc811x support
-is disabled, as they share resources.
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- arch/arm/mach-pxa/gumstix-verdex.c | 6 +++++-
- 1 files changed, 5 insertions(+), 1 deletions(-)
-
---- a/arch/arm/mach-pxa/gumstix-verdex.c
-+++ b/arch/arm/mach-pxa/gumstix-verdex.c
-@@ -51,7 +51,9 @@
-
- #include <linux/delay.h>
-
--#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-+
-+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) \
-+ || defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-
- #include <linux/smsc911x.h>
-
-@@ -85,7 +87,9 @@ static struct platform_device verdex_sms
- .platform_data = &verdex_smsc911x_config,
- },
- };
-+#endif
-
-+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
- static void __init verdex_init_smsc911x(void)
- {
-
+++ /dev/null
-From 7169c68fec79e61549b8e9c0106dde88e4d1bf9d Mon Sep 17 00:00:00 2001
-From: Bobby Powers <rpowers@harttech.com>
-Date: Thu, 29 Oct 2009 15:39:45 -0400
-Subject: [PATCH] [ARM] pxa: fix Verdex Pro mmc initialization
-
-The MicroSD port doesn't have card detect, read-only switch
-support, and is continuously powered. Somewhere in the
-forward-porting this got lost in the structure initialization.
-
-Signed-off-by: Bobby Powers <rpowers@harttech.com>
----
- arch/arm/mach-pxa/gumstix-verdex.c | 7 +++++--
- 1 files changed, 5 insertions(+), 2 deletions(-)
-
---- a/arch/arm/mach-pxa/gumstix-verdex.c
-+++ b/arch/arm/mach-pxa/gumstix-verdex.c
-@@ -590,8 +590,11 @@ static int verdex_mci_init(struct device
- }
-
- static struct pxamci_platform_data verdex_mci_platform_data = {
-- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-- .init = verdex_mci_init,
-+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-+ .init = verdex_mci_init,
-+ .gpio_card_detect = -1,
-+ .gpio_card_ro = -1,
-+ .gpio_power = -1,
- };
-
- static void __init verdex_mmc_init(void)
+++ /dev/null
---- a/arch/arm/mach-pxa/gumstix-verdex.c
-+++ b/arch/arm/mach-pxa/gumstix-verdex.c
-@@ -51,6 +51,46 @@
-
- #include <linux/delay.h>
-
-+static struct resource flash_resource = {
-+ .start = 0x00000000,
-+ .end = SZ_64M - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mtd_partition gumstix_partitions[] = {
-+ {
-+ .name = "u-boot",
-+ .size = 0x00040000,
-+ .offset = 0,
-+ .mask_flags = MTD_WRITEABLE /* force read-only */
-+ } , {
-+ .name = "rootfs",
-+ .size = 0x01ec0000,
-+ .offset = 0x00040000
-+ } , {
-+ .name = "kernel",
-+ .size = 0x00100000,
-+ .offset = 0x01f00000
-+ }
-+};
-+
-+static struct flash_platform_data gumstix_flash_data = {
-+ .map_name = "cfi_probe",
-+ .parts = gumstix_partitions,
-+ .nr_parts = ARRAY_SIZE(gumstix_partitions),
-+ .width = 2,
-+};
-+
-+static struct platform_device gumstix_flash_device = {
-+ .name = "pxa2xx-flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gumstix_flash_data,
-+ },
-+ .resource = &flash_resource,
-+ .num_resources = 1,
-+};
-+
-
- #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) \
- || defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-@@ -540,6 +580,7 @@ static struct platform_device verdex_aud
- };
-
- static struct platform_device *devices[] __initdata = {
-+ &gumstix_flash_device,
- &verdex_audio_device,
- };
-
projects / openwrt / staging / neocturne.git / commitdiff