bnx2x: Move all UDP port notifiers to single function

This patch goes through and combines the notifiers for VXLAN and GENEVE
into a single function for each action.  So there is now one combined
function for getting ports, one for adding the ports, and one for deleting
the ports.

I also went through and dropped the BNX2X VXLAN and GENEVE specific build
flags.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 18042c2460bdae7c53e038d4ed4cdcd4ee2d92c6..d92c37fa8036afa0ff090a5cde8ed8ec0c69e6cc 100644 (file)
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -139,26 +139,6 @@ config BNX2X_SRIOV
          Virtualization support in the 578xx and 57712 products. This
          allows for virtual function acceleration in virtual environments.
 
-config BNX2X_VXLAN
-       bool "Virtual eXtensible Local Area Network support"
-       default n
-       depends on BNX2X && VXLAN && !(BNX2X=y && VXLAN=m)
-       ---help---
-         This enables hardward offload support for VXLAN protocol over the
-         NetXtremeII series adapters.
-         Say Y here if you want to enable hardware offload support for
-         Virtual eXtensible Local Area Network (VXLAN) in the driver.
-
-config BNX2X_GENEVE
-       bool "Generic Network Virtualization Encapsulation (GENEVE) support"
-       depends on BNX2X && GENEVE && !(BNX2X=y && GENEVE=m)
-       ---help---
-          This allows one to create GENEVE virtual interfaces that provide
-          Layer 2 Networks over Layer 3 Networks. GENEVE is often used
-          to tunnel virtual network infrastructure in virtualized environments.
-         Say Y here if you want to enable hardware offload support for
-         Generic Network Virtualization Encapsulation (GENEVE) in the driver.
-
 config BGMAC
        tristate "BCMA bus GBit core support"
        depends on BCMA && BCMA_HOST_SOC

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index a59d55e25d5f02cbc69d903daaa577e21bafc10f..97e8925116662b105c7c7a57274fa2f5e906865d 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -59,9 +59,6 @@
 #include <linux/semaphore.h>
 #include <linux/stringify.h>
 #include <linux/vmalloc.h>
-#if IS_ENABLED(CONFIG_BNX2X_GENEVE)
-#include <net/geneve.h>
-#endif
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 #include "bnx2x_init_ops.h"
@@ -10076,7 +10073,6 @@ static void bnx2x_parity_recover(struct bnx2x *bp)
        }
 }
 
-#if defined(CONFIG_BNX2X_VXLAN) || IS_ENABLED(CONFIG_BNX2X_GENEVE)
 static int bnx2x_udp_port_update(struct bnx2x *bp)
 {
        struct bnx2x_func_switch_update_params *switch_update_params;
@@ -10177,47 +10173,42 @@ static void __bnx2x_del_udp_port(struct bnx2x *bp, u16 port,
                DP(BNX2X_MSG_SP, "Deleted UDP tunnel [%d] port %d\n",
                   type, port);
 }
-#endif
-
-#ifdef CONFIG_BNX2X_VXLAN
-static void bnx2x_add_vxlan_port(struct net_device *netdev,
-                                sa_family_t sa_family, __be16 port)
-{
-       struct bnx2x *bp = netdev_priv(netdev);
-       u16 t_port = ntohs(port);
-
-       __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN);
-}
-
-static void bnx2x_del_vxlan_port(struct net_device *netdev,
-                                sa_family_t sa_family, __be16 port)
-{
-       struct bnx2x *bp = netdev_priv(netdev);
-       u16 t_port = ntohs(port);
-
-       __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN);
-}
-#endif
 
-#if IS_ENABLED(CONFIG_BNX2X_GENEVE)
-static void bnx2x_add_geneve_port(struct net_device *netdev,
-                                 sa_family_t sa_family, __be16 port)
+static void bnx2x_udp_tunnel_add(struct net_device *netdev,
+                                struct udp_tunnel_info *ti)
 {
        struct bnx2x *bp = netdev_priv(netdev);
-       u16 t_port = ntohs(port);
+       u16 t_port = ntohs(ti->port);
 
-       __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE);
+       switch (ti->type) {
+       case UDP_TUNNEL_TYPE_VXLAN:
+               __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN);
+               break;
+       case UDP_TUNNEL_TYPE_GENEVE:
+               __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE);
+               break;
+       default:
+               break;
+       }
 }
 
-static void bnx2x_del_geneve_port(struct net_device *netdev,
-                                 sa_family_t sa_family, __be16 port)
+static void bnx2x_udp_tunnel_del(struct net_device *netdev,
+                                struct udp_tunnel_info *ti)
 {
        struct bnx2x *bp = netdev_priv(netdev);
-       u16 t_port = ntohs(port);
+       u16 t_port = ntohs(ti->port);
 
-       __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE);
+       switch (ti->type) {
+       case UDP_TUNNEL_TYPE_VXLAN:
+               __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN);
+               break;
+       case UDP_TUNNEL_TYPE_GENEVE:
+               __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE);
+               break;
+       default:
+               break;
+       }
 }
-#endif
 
 static int bnx2x_close(struct net_device *dev);
 
@@ -10325,7 +10316,6 @@ sp_rtnl_not_reset:
                               &bp->sp_rtnl_state))
                bnx2x_update_mng_version(bp);
 
-#if defined(CONFIG_BNX2X_VXLAN) || IS_ENABLED(CONFIG_BNX2X_GENEVE)
        if (test_and_clear_bit(BNX2X_SP_RTNL_CHANGE_UDP_PORT,
                               &bp->sp_rtnl_state)) {
                if (bnx2x_udp_port_update(bp)) {
@@ -10335,20 +10325,14 @@ sp_rtnl_not_reset:
                               BNX2X_UDP_PORT_MAX);
                } else {
                        /* Since we don't store additional port information,
-                        * if no port is configured for any feature ask for
+                        * if no ports are configured for any feature ask for
                         * information about currently configured ports.
                         */
-#ifdef CONFIG_BNX2X_VXLAN
-                       if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count)
-                               vxlan_get_rx_port(bp->dev);
-#endif
-#if IS_ENABLED(CONFIG_BNX2X_GENEVE)
-                       if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count)
-                               geneve_get_rx_port(bp->dev);
-#endif
+                       if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count &&
+                           !bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count)
+                               udp_tunnel_get_rx_info(bp->dev);
                }
        }
-#endif
 
        /* work which needs rtnl lock not-taken (as it takes the lock itself and
         * can be called from other contexts as well)
@@ -12551,14 +12535,8 @@ static int bnx2x_open(struct net_device *dev)
        if (rc)
                return rc;
 
-#ifdef CONFIG_BNX2X_VXLAN
-       if (IS_PF(bp))
-               vxlan_get_rx_port(dev);
-#endif
-#if IS_ENABLED(CONFIG_BNX2X_GENEVE)
        if (IS_PF(bp))
-               geneve_get_rx_port(dev);
-#endif
+               udp_tunnel_get_rx_info(dev);
 
        return 0;
 }
@@ -13045,14 +13023,8 @@ static const struct net_device_ops bnx2x_netdev_ops = {
        .ndo_get_phys_port_id   = bnx2x_get_phys_port_id,
        .ndo_set_vf_link_state  = bnx2x_set_vf_link_state,
        .ndo_features_check     = bnx2x_features_check,
-#ifdef CONFIG_BNX2X_VXLAN
-       .ndo_add_vxlan_port     = bnx2x_add_vxlan_port,
-       .ndo_del_vxlan_port     = bnx2x_del_vxlan_port,
-#endif
-#if IS_ENABLED(CONFIG_BNX2X_GENEVE)
-       .ndo_add_geneve_port    = bnx2x_add_geneve_port,
-       .ndo_del_geneve_port    = bnx2x_del_geneve_port,
-#endif
+       .ndo_udp_tunnel_add     = bnx2x_udp_tunnel_add,
+       .ndo_udp_tunnel_del     = bnx2x_udp_tunnel_del,
 };
 
 static int bnx2x_set_coherency_mask(struct bnx2x *bp)