#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x)
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include "fec.h"
(MCF_MBAR + 0x1000),
#elif defined(CONFIG_M520x)
(MCF_MBAR+0x30000),
+#elif defined(CONFIG_M532x)
+ (MCF_MBAR+0xfc030000),
#else
&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec),
#endif
#define TX_RING_MOD_MASK 15 /* for this to work */
#if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE)
-#error "FEC: descriptor ring size contants too large"
+#error "FEC: descriptor ring size constants too large"
#endif
/* Interrupt events/masks.
/*
- * The 5270/5271/5280/5282 RX control register also contains maximum frame
+ * The 5270/5271/5280/5282/532x RX control register also contains maximum frame
* size bits. Other FEC hardware does not, so we need to take that into
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
};
/* ------------------------------------------------------------------------- */
-
+#if !defined(CONFIG_M532x)
#ifdef CONFIG_RPXCLASSIC
static void
mii_link_interrupt(void *dev_id);
static irqreturn_t
mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs);
#endif
+#endif
#if defined(CONFIG_M5272)
/* ------------------------------------------------------------------------- */
+#elif defined(CONFIG_M532x)
+/*
+ * Code specific for M532x
+ */
+static void __inline__ fec_request_intrs(struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ int b;
+ static const struct idesc {
+ char *name;
+ unsigned short irq;
+ } *idp, id[] = {
+ { "fec(TXF)", 36 },
+ { "fec(TXB)", 37 },
+ { "fec(TXFIFO)", 38 },
+ { "fec(TXCR)", 39 },
+ { "fec(RXF)", 40 },
+ { "fec(RXB)", 41 },
+ { "fec(MII)", 42 },
+ { "fec(LC)", 43 },
+ { "fec(HBERR)", 44 },
+ { "fec(GRA)", 45 },
+ { "fec(EBERR)", 46 },
+ { "fec(BABT)", 47 },
+ { "fec(BABR)", 48 },
+ { NULL },
+ };
+
+ fep = netdev_priv(dev);
+ b = (fep->index) ? 128 : 64;
+
+ /* Setup interrupt handlers. */
+ for (idp = id; idp->name; idp++) {
+ if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
+ printk("FEC: Could not allocate %s IRQ(%d)!\n",
+ idp->name, b+idp->irq);
+ }
+
+ /* Unmask interrupts */
+ MCF_INTC0_ICR36 = 0x2;
+ MCF_INTC0_ICR37 = 0x2;
+ MCF_INTC0_ICR38 = 0x2;
+ MCF_INTC0_ICR39 = 0x2;
+ MCF_INTC0_ICR40 = 0x2;
+ MCF_INTC0_ICR41 = 0x2;
+ MCF_INTC0_ICR42 = 0x2;
+ MCF_INTC0_ICR43 = 0x2;
+ MCF_INTC0_ICR44 = 0x2;
+ MCF_INTC0_ICR45 = 0x2;
+ MCF_INTC0_ICR46 = 0x2;
+ MCF_INTC0_ICR47 = 0x2;
+ MCF_INTC0_ICR48 = 0x2;
+
+ MCF_INTC0_IMRH &= ~(
+ MCF_INTC_IMRH_INT_MASK36 |
+ MCF_INTC_IMRH_INT_MASK37 |
+ MCF_INTC_IMRH_INT_MASK38 |
+ MCF_INTC_IMRH_INT_MASK39 |
+ MCF_INTC_IMRH_INT_MASK40 |
+ MCF_INTC_IMRH_INT_MASK41 |
+ MCF_INTC_IMRH_INT_MASK42 |
+ MCF_INTC_IMRH_INT_MASK43 |
+ MCF_INTC_IMRH_INT_MASK44 |
+ MCF_INTC_IMRH_INT_MASK45 |
+ MCF_INTC_IMRH_INT_MASK46 |
+ MCF_INTC_IMRH_INT_MASK47 |
+ MCF_INTC_IMRH_INT_MASK48 );
+
+ /* Set up gpio outputs for MII lines */
+ MCF_GPIO_PAR_FECI2C |= (0 |
+ MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+ MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
+ MCF_GPIO_PAR_FEC = (0 |
+ MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
+ MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
+}
+
+static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
+{
+ volatile fec_t *fecp;
+
+ fecp = fep->hwp;
+ fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
+ fecp->fec_x_cntrl = 0x00;
+
+ /*
+ * Set MII speed to 2.5 MHz
+ */
+ fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+ fecp->fec_mii_speed = fep->phy_speed;
+
+ fec_restart(dev, 0);
+}
+
+static void __inline__ fec_get_mac(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+ volatile fec_t *fecp;
+ unsigned char *iap, tmpaddr[ETH_ALEN];
+
+ fecp = fep->hwp;
+
+ if (FEC_FLASHMAC) {
+ /*
+ * Get MAC address from FLASH.
+ * If it is all 1's or 0's, use the default.
+ */
+ iap = FEC_FLASHMAC;
+ if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
+ (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
+ iap = fec_mac_default;
+ if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
+ (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
+ iap = fec_mac_default;
+ } else {
+ *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
+ *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
+ iap = &tmpaddr[0];
+ }
+
+ memcpy(dev->dev_addr, iap, ETH_ALEN);
+
+ /* Adjust MAC if using default MAC address */
+ if (iap == fec_mac_default)
+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
+}
+
+static void __inline__ fec_enable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_disable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_phy_ack_intr(void)
+{
+}
+
+static void __inline__ fec_localhw_setup(void)
+{
+}
+
+/*
+ * Do not need to make region uncached on 532x.
+ */
+static void __inline__ fec_uncache(unsigned long addr)
+{
+}
+
+/* ------------------------------------------------------------------------- */
+
+
#else
/*
mii_do_cmd(dev, fep->phy->config);
mii_do_cmd(dev, phy_cmd_config); /* display configuration */
- /* FIXME: use netif_carrier_{on,off} ; this polls
- * until link is up which is wrong... could be
- * 30 seconds or more we are trapped in here. -jgarzik
+ /* Poll until the PHY tells us its configuration
+ * (not link state).
+ * Request is initiated by mii_do_cmd above, but answer
+ * comes by interrupt.
+ * This should take about 25 usec per register at 2.5 MHz,
+ * and we read approximately 5 registers.
*/
while(!fep->sequence_done)
schedule();
*/
fec_request_intrs(dev);
- /* Clear and enable interrupts */
- fecp->fec_ievent = 0xffc00000;
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
fecp->fec_hash_table_high = 0;
fecp->fec_hash_table_low = 0;
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
fecp->fec_ecntrl = 2;
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
dev->base_addr = (unsigned long)fecp;
/* setup MII interface */
fec_set_mii(dev, fep);
+ /* Clear and enable interrupts */
+ fecp->fec_ievent = 0xffc00000;
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+
/* Queue up command to detect the PHY and initialize the
* remainder of the interface.
*/
fecp->fec_ecntrl = 1;
udelay(10);
- /* Enable interrupts we wish to service.
- */
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
-
/* Clear any outstanding interrupt.
*/
fecp->fec_ievent = 0xffc00000;
/* And last, enable the transmit and receive processing.
*/
fecp->fec_ecntrl = 2;
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
+
+ /* Enable interrupts we wish to service.
+ */
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
}
static void
projects / openwrt / staging / blogic.git / commitdiff