generic: revert workarounds for AR8337 switch

The intention of 967b6be118e3 ("ar8327: Add workarounds for AR8337
switch") was to remove the register fixups for AR8337. But instead they
were removed for AR8327.

The RGMII RX delay is forced even if the port is used as phy instead of
mac, which results in no package flow at least for one board.

Fixes: FS#1664
Signed-off-by: Mathias Kresin <dev@kresin.me>

diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.c b/target/linux/generic/files/drivers/net/phy/ar8327.c
index 7bfc1875094f1bcb149898b2184035040dfce2fd..74f0a08d76e837dc6576a4be84a976fc86b685ef 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/ar8327.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8327.c
@@ -506,14 +506,6 @@ ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
        ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t);
 
        t = ar8327_get_pad_cfg(pdata->pad5_cfg);
-       if (chip_is_ar8337(priv)) {
-               /*
-                * Workaround: RGMII RX delay setting needs to be
-                * always specified for AR8337 to avoid port 5
-                * RX hang on high traffic / flood conditions
-                */
-               t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
-       }
        ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t);
        t = ar8327_get_pad_cfg(pdata->pad6_cfg);
        ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t);
@@ -678,39 +670,6 @@ ar8327_init_globals(struct ar8xxx_priv *priv)
        /* Disable EEE on all phy's due to stability issues */
        for (i = 0; i < AR8XXX_NUM_PHYS; i++)
                data->eee[i] = false;
-
-       if (chip_is_ar8337(priv)) {
-               /* Update HOL registers with values suggested by QCA switch team */
-               for (i = 0; i < AR8327_NUM_PORTS; i++) {
-                       if (i == AR8216_PORT_CPU || i == 5 || i == 6) {
-                               t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S;
-                               t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S;
-                               t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S;
-                               t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S;
-                               t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF_S;
-                               t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF_S;
-                               t |= 0x1e << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S;
-                       } else {
-                               t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S;
-                               t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S;
-                               t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S;
-                               t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S;
-                               t |= 0x19 << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S;
-                       }
-                       ar8xxx_write(priv, AR8327_REG_PORT_HOL_CTRL0(i), t);
-
-                       t = 0x6 << AR8327_PORT_HOL_CTRL1_ING_BUF_S;
-                       t |= AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN;
-                       t |= AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN;
-                       t |= AR8327_PORT_HOL_CTRL1_WRED_EN;
-                       ar8xxx_rmw(priv, AR8327_REG_PORT_HOL_CTRL1(i),
-                                  AR8327_PORT_HOL_CTRL1_ING_BUF |
-                                  AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
-                                  AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
-                                  AR8327_PORT_HOL_CTRL1_WRED_EN,
-                                  t);
-               }
-       }
 }
 
 static void
@@ -1498,6 +1457,7 @@ const struct ar8xxx_chip ar8327_chip = {
        .atu_flush_port = ar8327_atu_flush_port,
        .vtu_flush = ar8327_vtu_flush,
        .vtu_load_vlan = ar8327_vtu_load_vlan,
+       .phy_fixup = ar8327_phy_fixup,
        .set_mirror_regs = ar8327_set_mirror_regs,
        .get_arl_entry = ar8327_get_arl_entry,
        .sw_hw_apply = ar8327_sw_hw_apply,

diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.h b/target/linux/generic/files/drivers/net/phy/ar8327.h
index 2309e528994187c5036fee1088d9705c69e2a590..d53ef885b198e2edbd7d8fcb91cd4e3e712985f7 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/ar8327.h
+++ b/target/linux/generic/files/drivers/net/phy/ar8327.h
@@ -278,28 +278,7 @@
 
 #define AR8327_REG_PORT_PRIO(_i)               (0x664 + (_i) * 0xc)
 
-#define AR8327_REG_PORT_HOL_CTRL0(_i)          (0x970 + (_i) * 0x8)
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF    BITS(0, 4)
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S  0
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF    BITS(4, 4)
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S  4
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF    BITS(8, 4)
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S  8
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF    BITS(12, 4)
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S  12
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF    BITS(16, 4)
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF_S  16
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF    BITS(20, 4)
-#define   AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF_S  20
-#define   AR8327_PORT_HOL_CTRL0_EG_PORT_BUF    BITS(24, 6)
-#define   AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S  24
-
 #define AR8327_REG_PORT_HOL_CTRL1(_i)          (0x974 + (_i) * 0x8)
-#define   AR8327_PORT_HOL_CTRL1_ING_BUF                BITS(0, 4)
-#define   AR8327_PORT_HOL_CTRL1_ING_BUF_S      0
-#define   AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN  BIT(6)
-#define   AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN BIT(7)
-#define   AR8327_PORT_HOL_CTRL1_WRED_EN                BIT(8)
 #define   AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN   BIT(16)
 
 #define AR8337_PAD_MAC06_EXCHANGE_EN           BIT(31)