ramips: add support for Planex MZK-EX750NP.

add support for Planex MZK-EX750NP.
MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater.
Built-in power supply.
64MiB RAM, 8MiB SPI Flash, non Wired Ethernet.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
SVN-Revision: 49268

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index aeaab3395a6c6f67f64d521cf0d83cde43926af3..47e1e6a6a3677dbe7fdadb33720cd5052ecbc346 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -206,6 +206,10 @@ mr-102n)
        set_wifi_led "$board:green:wlan"
        set_usb_led "$board:green:usb"
        ;;
+mzk-ex750np)
+       ucidef_set_led_default "power" "power" "$board:red:power" "1"
+       set_wifi_led "$board:red:wifi"
+       ;;
 na930)
        set_usb_led "$board:blue:status"
        ;;

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index c6c740f62382563b39793128aa523cad544ff432..ee690f63758ec713ab51822db6f9bd9eba387fd7 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -165,6 +165,7 @@ ramips_setup_interfaces()
        d105|\
        hpm|\
        mzk-ex300np|\
+       mzk-ex750np|\
        na930|\
        wli-tx4-ag300n|\
        wrh-300cr)

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 20ff8fff38ff5223bae3c93a466e0c363a33154c..c638d16a8142aacb7eb853367bfeb57f944b6519 100644 (file)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -41,7 +41,8 @@ get_status_led() {
        hlk-rm04|\
        jhr-n825r|\
        mpr-a1|\
-       mpr-a2)
+       mpr-a2|\
+       mzk-ex750np)
                status_led="$board:red:power"
                ;;
        ai-br100|\

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 2c669c5a5bf7c48d5532a86024a53afe10db83c7..0ac0f68bb5939e39461b9c3163c61281a131be24 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -298,6 +298,9 @@ ramips_board_detect() {
        *"MZK-EX300NP")
                name="mzk-ex300np"
                ;;
+       *"MZK-EX750NP")
+               name="mzk-ex750np"
+               ;;
        *"MZK-W300NH2"*)
                name="mzk-w300nh2"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 2b24030ecd4bffe52f1dfad817b34c77b70c7d2e..86ea4a33bd519feb79cc463232968399bb4a0122 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -90,6 +90,7 @@ platform_check_image() {
        mzk-750dhp|\
        mzk-dp150n|\
        mzk-ex300np|\
+       mzk-ex750np|\
        mzk-w300nh2|\
        mzk-wdpr|\
        nbg-419n|\

diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts b/target/linux/ramips/dts/MZK-EX750NP.dts
new file mode 100644 (file)
index 0000000..9b5b418
--- /dev/null
+++ b/target/linux/ramips/dts/MZK-EX750NP.dts
@@ -0,0 +1,150 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+       compatible = "ralink,mt7620a-soc";
+       model = "Planex MZK-EX750NP";
+
+       palmbus@10000000 {
+               gpio2: gpio@660 {
+                       status = "okay";
+               };
+
+               gpio3: gpio@688 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "jedec,spi-nor";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "w25q64";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x730000>;
+                               };
+
+                               partition@780000 {
+                                       label = "Udata";
+                                       reg = <0x780000 0x80000>;
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               pinctrl-names = "default";
+               pinctrl-0 = <&ephy_pins>;
+               mtd-mac-address = <&factory 0x4>;
+               mediatek,portmap = "llllw";
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
+       pcie@10140000 {
+               status = "okay";
+
+               pcie-bridge {
+                       mt76@0,0 {
+                               reg = <0x0000 0 0 0 0>;
+                               device_type = "pci";
+                               mediatek,mtd-eeprom = <&factory 0x8000>;
+                               mediatek,2ghz = <0>;
+                       };
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "mzk-ex750np:red:power";
+                       gpios = <&gpio0 14 1>;
+               };
+
+               wifi {
+                       label = "mzk-ex750np:red:wifi";
+                       gpios = <&gpio3 0 1>;
+               };
+
+               wps {
+                       label = "mzk-ex750np:green:wps";
+                       gpios = <&gpio0 10 1>;
+               };
+
+               rep {
+                       label = "mzk-ex750np:blue:rep";
+                       gpios = <&gpio2 16 1>;
+               };
+
+               wifi1 {
+                       label = "mzk-ex750np:blue:wifi1";
+                       gpios = <&gpio2 19 1>;
+               };
+
+               wifi2 {
+                       label = "mzk-ex750np:blue:wifi2";
+                       gpios = <&gpio2 18 1>;
+               };
+
+               wifi3 {
+                       label = "mzk-ex750np:blue:wifi3";
+                       gpios = <&gpio2 17 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 9 1>;
+                       linux,code = <0x198>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 13 0>;
+                       linux,code = <0x211>;
+               };
+       };
+};

diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 35cb46a52dbbec51ca801a5c18ed4f60ed12cdc7..09c0ec27a0019e51f4b7c0702825a0ffa451369b 100644 (file)
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -102,6 +102,7 @@ Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930
 Image/Build/Profile/DB-WRT01=$(call BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01)
 Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
 Image/Build/Profile/MZK-EX300NP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-ex300np,MZK-EX300NP)
+Image/Build/Profile/MZK-EX750NP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-ex750np,MZK-EX750NP)
 Image/Build/Profile/HC5661=$(call BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661)
 Image/Build/Profile/HC5761=$(call BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761)
 Image/Build/Profile/HC5861=$(call BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861)
@@ -149,6 +150,7 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/DB-WRT01,$(1))
        $(call Image/Build/Profile/MZK-750DHP,$(1))
        $(call Image/Build/Profile/MZK-EX300NP,$(1))
+       $(call Image/Build/Profile/MZK-EX750NP,$(1))
        $(call Image/Build/Profile/NA930,$(1))
        $(call Image/Build/Profile/HC5661,$(1))
        $(call Image/Build/Profile/HC5761,$(1))

diff --git a/target/linux/ramips/mt7620/profiles/planex.mk b/target/linux/ramips/mt7620/profiles/planex.mk
index 157cf8d334c08153868d80bcebf9e26d8e0c69b8..f461aeb211da5cda3d73b1015ed2273aa661528a 100644 (file)
--- a/target/linux/ramips/mt7620/profiles/planex.mk
+++ b/target/linux/ramips/mt7620/profiles/planex.mk
@@ -39,3 +39,14 @@ define Profile/MZK-EX300NP/Description
        Package set optimized for the Planex MZK-EX300NP.
 endef
 $(eval $(call Profile,MZK-EX300NP))
+
+
+define Profile/MZK-EX750NP
+       NAME:=Planex MZK-EX750NP
+       PACKAGES:= kmod-mt76 kmod-mt7610e
+endef
+
+define Profile/MZK-EX750NP/Description
+       Package set optimized for the Planex MZK-EX750NP.
+endef
+$(eval $(call Profile,MZK-EX750NP))