#include <linux/spi/spi.h>
#include <linux/spi/rspi.h>
-#define RSPI_SPCR 0x00
-#define RSPI_SSLP 0x01
-#define RSPI_SPPCR 0x02
-#define RSPI_SPSR 0x03
-#define RSPI_SPDR 0x04
-#define RSPI_SPSCR 0x08
-#define RSPI_SPSSR 0x09
-#define RSPI_SPBR 0x0a
-#define RSPI_SPDCR 0x0b
-#define RSPI_SPCKD 0x0c
-#define RSPI_SSLND 0x0d
-#define RSPI_SPND 0x0e
-#define RSPI_SPCR2 0x0f
-#define RSPI_SPCMD0 0x10
-#define RSPI_SPCMD1 0x12
-#define RSPI_SPCMD2 0x14
-#define RSPI_SPCMD3 0x16
-#define RSPI_SPCMD4 0x18
-#define RSPI_SPCMD5 0x1a
-#define RSPI_SPCMD6 0x1c
-#define RSPI_SPCMD7 0x1e
+#define RSPI_SPCR 0x00 /* Control Register */
+#define RSPI_SSLP 0x01 /* Slave Select Polarity Register */
+#define RSPI_SPPCR 0x02 /* Pin Control Register */
+#define RSPI_SPSR 0x03 /* Status Register */
+#define RSPI_SPDR 0x04 /* Data Register */
+#define RSPI_SPSCR 0x08 /* Sequence Control Register */
+#define RSPI_SPSSR 0x09 /* Sequence Status Register */
+#define RSPI_SPBR 0x0a /* Bit Rate Register */
+#define RSPI_SPDCR 0x0b /* Data Control Register */
+#define RSPI_SPCKD 0x0c /* Clock Delay Register */
+#define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */
+#define RSPI_SPND 0x0e /* Next-Access Delay Register */
+#define RSPI_SPCR2 0x0f /* Control Register 2 */
+#define RSPI_SPCMD0 0x10 /* Command Register 0 */
+#define RSPI_SPCMD1 0x12 /* Command Register 1 */
+#define RSPI_SPCMD2 0x14 /* Command Register 2 */
+#define RSPI_SPCMD3 0x16 /* Command Register 3 */
+#define RSPI_SPCMD4 0x18 /* Command Register 4 */
+#define RSPI_SPCMD5 0x1a /* Command Register 5 */
+#define RSPI_SPCMD6 0x1c /* Command Register 6 */
+#define RSPI_SPCMD7 0x1e /* Command Register 7 */
+#define RSPI_SPBFCR 0x20 /* Buffer Control Register */
+#define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */
/*qspi only */
#define QSPI_SPBFCR 0x18
#define QSPI_SPBMUL2 0x24
#define QSPI_SPBMUL3 0x28
-/* SPCR */
-#define SPCR_SPRIE 0x80
-#define SPCR_SPE 0x40
-#define SPCR_SPTIE 0x20
-#define SPCR_SPEIE 0x10
-#define SPCR_MSTR 0x08
-#define SPCR_MODFEN 0x04
-#define SPCR_TXMD 0x02
-#define SPCR_SPMS 0x01
-
-/* SSLP */
-#define SSLP_SSL1P 0x02
-#define SSLP_SSL0P 0x01
-
-/* SPPCR */
-#define SPPCR_MOIFE 0x20
-#define SPPCR_MOIFV 0x10
+/* SPCR - Control Register */
+#define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */
+#define SPCR_SPE 0x40 /* Function Enable */
+#define SPCR_SPTIE 0x20 /* Transmit Interrupt Enable */
+#define SPCR_SPEIE 0x10 /* Error Interrupt Enable */
+#define SPCR_MSTR 0x08 /* Master/Slave Mode Select */
+#define SPCR_MODFEN 0x04 /* Mode Fault Error Detection Enable */
+/* RSPI on SH only */
+#define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */
+#define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */
+
+/* SSLP - Slave Select Polarity Register */
+#define SSLP_SSL1P 0x02 /* SSL1 Signal Polarity Setting */
+#define SSLP_SSL0P 0x01 /* SSL0 Signal Polarity Setting */
+
+/* SPPCR - Pin Control Register */
+#define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */
+#define SPPCR_MOIFV 0x10 /* MOSI Idle Fixed Value */
#define SPPCR_SPOM 0x04
-#define SPPCR_SPLP2 0x02
-#define SPPCR_SPLP 0x01
-
-/* SPSR */
-#define SPSR_SPRF 0x80
-#define SPSR_SPTEF 0x20
-#define SPSR_PERF 0x08
-#define SPSR_MODF 0x04
-#define SPSR_IDLNF 0x02
-#define SPSR_OVRF 0x01
-
-/* SPSCR */
-#define SPSCR_SPSLN_MASK 0x07
-
-/* SPSSR */
-#define SPSSR_SPECM_MASK 0x70
-#define SPSSR_SPCP_MASK 0x07
-
-/* SPDCR */
-#define SPDCR_SPLW 0x20
-#define SPDCR_SPRDTD 0x10
+#define SPPCR_SPLP2 0x02 /* Loopback Mode 2 (non-inverting) */
+#define SPPCR_SPLP 0x01 /* Loopback Mode (inverting) */
+
+/* SPSR - Status Register */
+#define SPSR_SPRF 0x80 /* Receive Buffer Full Flag */
+#define SPSR_TEND 0x40 /* Transmit End */
+#define SPSR_SPTEF 0x20 /* Transmit Buffer Empty Flag */
+#define SPSR_PERF 0x08 /* Parity Error Flag */
+#define SPSR_MODF 0x04 /* Mode Fault Error Flag */
+#define SPSR_IDLNF 0x02 /* RSPI Idle Flag */
+#define SPSR_OVRF 0x01 /* Overrun Error Flag */
+
+/* SPSCR - Sequence Control Register */
+#define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */
+
+/* SPSSR - Sequence Status Register */
+#define SPSSR_SPECM_MASK 0x70 /* Command Error Mask */
+#define SPSSR_SPCP_MASK 0x07 /* Command Pointer Mask */
+
+/* SPDCR - Data Control Register */
+#define SPDCR_TXDMY 0x80 /* Dummy Data Transmission Enable */
+#define SPDCR_SPLW1 0x40 /* Access Width Specification (RZ) */
+#define SPDCR_SPLW0 0x20 /* Access Width Specification (RZ) */
+#define SPDCR_SPLLWORD (SPDCR_SPLW1 | SPDCR_SPLW0)
+#define SPDCR_SPLWORD SPDCR_SPLW1
+#define SPDCR_SPLBYTE SPDCR_SPLW0
+#define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */
+#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select */
#define SPDCR_SLSEL1 0x08
#define SPDCR_SLSEL0 0x04
-#define SPDCR_SLSEL_MASK 0x0c
+#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select */
#define SPDCR_SPFC1 0x02
#define SPDCR_SPFC0 0x01
+#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) */
-/* SPCKD */
-#define SPCKD_SCKDL_MASK 0x07
+/* SPCKD - Clock Delay Register */
+#define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */
-/* SSLND */
-#define SSLND_SLNDL_MASK 0x07
+/* SSLND - Slave Select Negation Delay Register */
+#define SSLND_SLNDL_MASK 0x07 /* SSL Negation Delay Setting (1-8) */
-/* SPND */
-#define SPND_SPNDL_MASK 0x07
+/* SPND - Next-Access Delay Register */
+#define SPND_SPNDL_MASK 0x07 /* Next-Access Delay Setting (1-8) */
-/* SPCR2 */
-#define SPCR2_PTE 0x08
-#define SPCR2_SPIE 0x04
-#define SPCR2_SPOE 0x02
-#define SPCR2_SPPE 0x01
+/* SPCR2 - Control Register 2 */
+#define SPCR2_PTE 0x08 /* Parity Self-Test Enable */
+#define SPCR2_SPIE 0x04 /* Idle Interrupt Enable */
+#define SPCR2_SPOE 0x02 /* Odd Parity Enable (vs. Even) */
+#define SPCR2_SPPE 0x01 /* Parity Enable */
-/* SPCMDn */
-#define SPCMD_SCKDEN 0x8000
-#define SPCMD_SLNDEN 0x4000
-#define SPCMD_SPNDEN 0x2000
-#define SPCMD_LSBF 0x1000
-#define SPCMD_SPB_MASK 0x0f00
+/* SPCMDn - Command Registers */
+#define SPCMD_SCKDEN 0x8000 /* Clock Delay Setting Enable */
+#define SPCMD_SLNDEN 0x4000 /* SSL Negation Delay Setting Enable */
+#define SPCMD_SPNDEN 0x2000 /* Next-Access Delay Enable */
+#define SPCMD_LSBF 0x1000 /* LSB First */
+#define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */
#define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK)
#define SPCMD_SPB_8BIT 0x0000 /* qspi only */
#define SPCMD_SPB_16BIT 0x0100
#define SPCMD_SPB_20BIT 0x0000
#define SPCMD_SPB_24BIT 0x0100
#define SPCMD_SPB_32BIT 0x0200
-#define SPCMD_SSLKP 0x0080
-#define SPCMD_SSLA_MASK 0x0030
-#define SPCMD_BRDV_MASK 0x000c
-#define SPCMD_CPOL 0x0002
-#define SPCMD_CPHA 0x0001
-
-/* SPBFCR */
-#define SPBFCR_TXRST 0x80 /* qspi only */
-#define SPBFCR_RXRST 0x40 /* qspi only */
+#define SPCMD_SSLKP 0x0080 /* SSL Signal Level Keeping */
+#define SPCMD_SSLA_MASK 0x0030 /* SSL Assert Signal Setting (RSPI) */
+#define SPCMD_BRDV_MASK 0x000c /* Bit Rate Division Setting */
+#define SPCMD_CPOL 0x0002 /* Clock Polarity Setting */
+#define SPCMD_CPHA 0x0001 /* Clock Phase Setting */
+
+/* SPBFCR - Buffer Control Register */
+#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset (qspi only) */
+#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset (qspi only) */
+#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
+#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
#define DUMMY_DATA 0x00
projects / openwrt / staging / blogic.git / commitdiff