This commit adds support for the MikroTik RouterBOARD wAP G-5HacT2HnD
(wAP AC), a small weatherproof dual band, dual-radio 802.11ac
wireless AP with integrated omnidirectional anntennae and one
10/100/1000 Mbps Ethernet port.
See https://mikrotik.com/product/RBwAPG-5HacT2HnD for more info.
Specifications:
- SoC: Qualcomm Atheros QCA9556
- RAM: 64 MB
- Storage: 16 MB NOR
- Wireless:
· Atheros AR9550 (SoC) 802.11b/g/n 2x2:2, 2 dBi antennae
· Qualcomm QCA9880 802.11a/n/ac 3x3:3, 2 dBi antennae
- Ethernet: Atheros AG71xx (SoC, AR8033), 1x 1000/100/10 port,
passive PoE in
Working:
- Board/system detection
- Sysupgrade
- Serial console
- Ethernet
- 2.4 GHz radio
- 5 GHz radio and LED
- Reset button
Not working/Unsupported:
- 2.4 GHz LED
- AP/CAP LED
- ZT2046Q SPI temperature and voltage sensor
This adds the basic features for supporting MikroTik devices:
- a common recipe for mikrotik images in common-mikrotik.mk
- support for minor (MikroTik NOR) split firmware (only for
generic subtarget so far)
Acknowledgments: Robert Marko <robimarko@gmail.com>
Andrew Cameron <apcameron@softhome.net>
Koen Vandeputte <koen.vandeputte@ncentric.com>
Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
+ model = "MikroTik RouterBOARD wAP G-5HacT2HnD";
+
+ aliases {
+ label-mac-device = ð1;
+ mdio-gpio1 = &mdio2;
+ serial0 = &uart;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ mdio2: mdio {
+ compatible = "virtual,mdio-gpio";
+
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio 11 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ device_type = "ethernet-phy";
+
+ phy-mode = "sgmii";
+
+ at803x-override-sgmii-link-check;
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x10>;
+
+ pll-data = <0x03000101 0x80000101 0x80001313>;
+ phy-handle = <&phy0>;
+
+ qca955x-sgmii-fixup;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "routerboot";
+ reg = <0x000000 0x00e000>;
+ read-only;
+ };
+
+ art: partition@e000 {
+ label = "art";
+ reg = <0x000e000 0x001000>;
+ read-only;
+ };
+
+ partition@f000 {
+ label = "bios";
+ reg = <0x000f000 0x001000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "routerboot2";
+ reg = <0x010000 0x00f000>;
+ read-only;
+ };
+
+ partition@1f000 {
+ label = "soft_config";
+ reg = <0x001f000 0x001000>;
+ };
+
+ partition@20000 {
+ compatible = "mikrotik,minor";
+ label = "firmware";
+ reg = <0x020000 0xfe0000>;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ qca,no-eeprom;
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+ };
+};
dlink,dir-505|\
engenius,ecb1750|\
glinet,gl-ar300m-lite|\
+ mikrotik,routerboard-wap-g-5hact2hnd|\
netgear,ex6400|\
netgear,ex7300|\
ocedo,koala|\
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions/caldata.sh
+. /lib/functions/mikrotik-caldata.sh
board=$(board_name)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
;;
+ mikrotik,routerboard-wap-g-5hact2hnd)
+ mikrotik_caldata_extract "art" 0x1000 0x440
+ ath9k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x10) +2)
+ ;;
nec,wg800hp)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
. /lib/functions/caldata.sh
. /lib/functions/k2t.sh
+. /lib/functions/mikrotik-caldata.sh
board=$(board_name)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
;;
+ mikrotik,routerboard-wap-g-5hact2hnd)
+ mikrotik_caldata_extract "art" 0x5000 0x844
+ ;;
nec,wg800hp)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
--- /dev/null
+# Copyright (C) 2019 Robert Marko <robimarko@gmail.com>
+# Copyright (C) 2019 Roger Pueyo Centelles <roger.pueyo@guifi.net>
+#
+# Helper function to extract MAC addresses and calibration data for MikroTik
+#
+
+mikrotik_caldata_extract() {
+ local part=$1
+ local offset=$(($2))
+ local count=$(($3))
+ local mtd
+ local erdfile="/lib/firmware/erd.bin"
+
+ mtd=$(find_mtd_chardev $part)
+ [ -n "$mtd" ] || caldata_die "no mtd device found for partition $part"
+
+ rbextract -e $mtd $erdfile
+
+ dd if=$erdfile of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+ caldata_die "failed to extract calibration data from $mtd"
+}
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
CONFIG_MTD_SPLIT_EVA_FW=y
+CONFIG_MTD_SPLIT_MINOR_FW=y
CONFIG_PHY_AR7100_USB=y
CONFIG_PHY_AR7200_USB=y
CONFIG_REGULATOR=y
BOARDNAME:=Generic
-FEATURES += squashfs
+FEATURES += minor squashfs
DEFAULT_PACKAGES += wpad-basic
define Target/Description
Build firmware images for generic Atheros AR71xx/AR913x/AR934x based boards.
endef
-
-
--- /dev/null
+define Device/mikrotik
+ DEVICE_VENDOR := MikroTik
+ DEVICE_PACKAGES := rbextract rbcfg
+ LOADER_TYPE := elf
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel
+endef
include ./common-buffalo.mk
+include ./common-mikrotik.mk
include ./common-netgear.mk
include ./common-tp-link.mk
include ./common-yuncore.mk
endef
TARGET_DEVICES += librerouter_librerouter-v1
+define Device/mikrotik_routerboard-wap-g-5hact2hnd
+ $(Device/mikrotik)
+ SOC := qca9556
+ DEVICE_MODEL := RouterBOARD wAP G-5HacT2HnD (wAP AC)
+ IMAGE_SIZE := 16256k
+ IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 -e | \
+ pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+ append-metadata | check-size $$$$(IMAGE_SIZE)
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+ SUPPORTED_DEVICES += rb-wapg-5hact2hnd
+endef
+TARGET_DEVICES += mikrotik_routerboard-wap-g-5hact2hnd
+
define Device/nec_wg1200cr
SOC := qca9563
DEVICE_VENDOR := NEC
projects / openwrt / staging / jow.git / commitdiff