ARCH:=mips
BOARD:=ifxmips
BOARDNAME:=Infineon Mips
-FEATURES:=squashfs jffs2
+FEATURES:=squashfs jffs2 atm
-LINUX_VERSION:=2.6.28.10
+LINUX_VERSION:=2.6.30.5
include $(INCLUDE_DIR)/target.mk
-DEFAULT_PACKAGES+=uboot-ifxmips hostapd-mini
+DEFAULT_PACKAGES+=uboot-ifxmips kmod-pppoa ppp-mod-pppoa linux-atm atm-tools br2684ctl kmod-ifxmips-atm dwc_usb
+
define Target/Description
Build firmware images for Infineon Mips Controllers
--- /dev/null
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth0
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config atm-bridge
+ option unit 0
+ option encaps llc
+ option vpi 1
+ option vci 32
+ option payload bridged # some ISPs need this set to 'routed'
+
+config interface wan
+ option ifname nas0
+ option proto pppoe
+ option username ""
+ option password ""
+ option defaultroute 0
+ option unit 1
+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ATM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_BCM47XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLASSIC_RCU=y
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_GPIO_DEVICE=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_CLK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-CONFIG_IFXMIPS=y
-CONFIG_IFXMIPS_EEPROM=y
-CONFIG_IFXMIPS_GPIO_RST_BTN=y
-# CONFIG_IFXMIPS_MEI is not set
-CONFIG_IFXMIPS_MII0=y
-# CONFIG_IFXMIPS_PROM_ASC0 is not set
-CONFIG_IFXMIPS_PROM_ASC1=y
-CONFIG_IFXMIPS_SSC=y
-CONFIG_IFXMIPS_WDT=y
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_IFXMIPS=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_IFXMIPS=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_NATSEMI is not set
-CONFIG_NF_CT_ACCT=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-# CONFIG_R6040 is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_WAIT_SCAN is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_IFXMIPS=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-# CONFIG_TC35815 is not set
-# CONFIG_TICK_ONESHOT is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_USB is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_DWC_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIDEO_MEDIA is not set
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BCM47XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLASSIC_RCU=y
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-CONFIG_IFXMIPS=y
-CONFIG_IFXMIPS_EEPROM=y
-CONFIG_IFXMIPS_GPIO_RST_BTN=y
-# CONFIG_IFXMIPS_MEI is not set
-CONFIG_IFXMIPS_MII0=y
-# CONFIG_IFXMIPS_PROM_ASC0 is not set
-CONFIG_IFXMIPS_PROM_ASC1=y
-CONFIG_IFXMIPS_SSC=y
-CONFIG_IFXMIPS_WDT=y
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_IFXMIPS=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_IFXMIPS=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-# CONFIG_R6040 is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_IFXMIPS=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+# CONFIG_BINARY_PRINTF is not set
+CONFIG_BITREVERSE=y
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR2=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+CONFIG_IFXMIPS=y
+# CONFIG_IFXMIPS_EEPROM is not set
+CONFIG_IFXMIPS_GPIO_RST_BTN=y
+# CONFIG_IFXMIPS_MEI is not set
+CONFIG_IFXMIPS_MII0=y
+# CONFIG_IFXMIPS_PROM_ASC0 is not set
+CONFIG_IFXMIPS_PROM_ASC1=y
+# CONFIG_IFXMIPS_SSC is not set
+CONFIG_IFXMIPS_WDT=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_KALLSYMS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_IFXMIPS=y
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_IFXMIPS=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_IFXMIPS=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+# CONFIG_TC35815 is not set
+CONFIG_TRACING_SUPPORT=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB_SUPPORT=y
+CONFIG_ZONE_DMA_FLAG=0
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/ifxmips/ifxmips.h>
+#include <asm/ifxmips/ifxmips_irq.h>
#define MAX_BOARD_NAME_LEN 32
#define MAX_IFXMIPS_DEVS 9
{ .name = "ifx:green:internet", .gpio = 5, .active_low = 1, },
{ .name = "ifx:red:internet", .gpio = 8, .active_low = 1, },
{ .name = "ifx:green:wlan", .gpio = 6, .active_low = 1, },
+ { .name = "ifx:green:usbpwr", .gpio = 14, .active_low = 1, },
{ .name = "ifx:green:usb", .gpio = 19, .active_low = 1, },
};
};
#endif
+static struct resource dwc_usb_res[] = {
+ {
+ .name = "dwc_usb_membase",
+ .flags = IORESOURCE_MEM,
+ .start = 0x1E101000,
+ .end = 0x1E101FFF
+ },
+ {
+ .name = "dwc_usb_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = IFXMIPS_USB_INT,
+ }
+};
+
+static struct platform_device dwc_usb =
+{
+ .id = 0,
+ .name = "dwc_usb",
+ .resource = dwc_usb_res,
+ .num_resources = ARRAY_SIZE(dwc_usb_res),
+};
+
struct platform_device *easy50712_devs[] = {
&ifxmips_led, &ifxmips_gpio, &ifxmips_mii,
- &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev
+ &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev, &dwc_usb
};
struct platform_device *easy4010_devs[] = {
&ifxmips_led, &ifxmips_gpio, &ifxmips_mii,
- &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev
+ &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev, &dwc_usb
};
struct platform_device *arv5419_devs[] = {
- &ifxmips_gpio, &ifxmips_mii, &ifxmips_mtd, &ifxmips_wdt,
+ &ifxmips_gpio, &ifxmips_mii, &ifxmips_mtd,
+ &ifxmips_gpio_dev, &ifxmips_wdt, &dwc_usb,
#ifdef CONFIG_LEDS_GPIO
&ifxmips_gpio_leds,
#endif
#include <asm/div64.h>
#include <linux/errno.h>
#include <asm/ifxmips/ifxmips.h>
-
-#define BASIC_INPUT_CLOCK_FREQUENCY_1 35328000
-#define BASIC_INPUT_CLOCK_FREQUENCY_2 36000000
-
-#define BASIS_INPUT_CRYSTAL_USB 12000000
-
-#define GET_BITS(x, msb, lsb) (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-
-
-#define CGU_PLL0_PHASE_DIVIDER_ENABLE (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 31))
-#define CGU_PLL0_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 30))
-#define CGU_PLL0_CFG_DSMSEL (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 28))
-#define CGU_PLL0_CFG_FRAC_EN (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 27))
-#define CGU_PLL1_SRC (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 31))
-#define CGU_PLL1_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 30))
-#define CGU_PLL1_CFG_DSMSEL (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 28))
-#define CGU_PLL1_CFG_FRAC_EN (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 27))
-#define CGU_PLL2_PHASE_DIVIDER_ENABLE (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 20))
-#define CGU_PLL2_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 19))
-#define CGU_SYS_FPI_SEL (1 << 6)
-#define CGU_SYS_DDR_SEL 0x3
-#define CGU_PLL0_SRC (1 << 29)
-
-#define CGU_PLL0_CFG_PLLK GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 26, 17)
-#define CGU_PLL0_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 12, 6)
-#define CGU_PLL0_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 5, 2)
-#define CGU_PLL1_CFG_PLLK GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 26, 17)
-#define CGU_PLL1_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 12, 6)
-#define CGU_PLL1_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 5, 2)
-#define CGU_PLL2_SRC GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 18, 17)
-#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 16, 13)
-#define CGU_PLL2_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 12, 6)
-#define CGU_PLL2_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 5, 2)
-#define CGU_IF_CLK_PCI_CLK GET_BITS(*IFXMIPS_CGU_IF_CLK, 23, 20)
+#include <asm/mach-ifxmips/cgu.h>
static unsigned int cgu_get_pll0_fdiv(void);
unsigned int ifxmips_clocks[] = {CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
}
}
-unsigned int cgu_get_fpi_bus_clock(int fpi)
-{
- unsigned int ret = cgu_get_io_region_clock();
- if ((fpi == 2) && (ifxmips_r32(IFXMIPS_CGU_SYS) & CGU_SYS_FPI_SEL))
- ret >>= 1;
- return ret;
-}
-
void cgu_setup_pci_clk(int external_clock)
{
/* set clock to 33Mhz */
IFXMIPS_CGU_IFCCR);
ifxmips_w32(ifxmips_r32(IFXMIPS_CGU_IFCCR) | 0x800000,
IFXMIPS_CGU_IFCCR);
- if (external_clock) {
+ if (external_clock) {
ifxmips_w32(ifxmips_r32(IFXMIPS_CGU_IFCCR) & ~(1 << 16),
IFXMIPS_CGU_IFCCR);
ifxmips_w32((1 << 30), IFXMIPS_CGU_PCICR);
}
}
+unsigned int cgu_get_fpi_bus_clock(int fpi)
+{
+ unsigned int ret = cgu_get_io_region_clock();
+ if ((fpi == 2) && (ifxmips_r32(IFXMIPS_CGU_SYS) & CGU_SYS_FPI_SEL))
+ ret >>= 1;
+ return ret;
+}
+EXPORT_SYMBOL(cgu_get_fpi_bus_clock);
+
unsigned int ifxmips_get_cpu_hz(void)
{
unsigned int ddr_clock = DDR_HZ;
#include <asm/ifxmips/ifxmips.h>
#include <asm/ifxmips/ifxmips_irq.h>
#include <asm/ifxmips/ifxmips_pmu.h>
-#include <asm/ifxmips/ifxmips_cgu.h>
+#include <asm/mach-ifxmips/cgu.h>
#include <asm/ifxmips/ifxmips_prom.h>
static unsigned int r4k_offset;
#include <asm/ifxmips/ifxmips.h>
#include <asm/ifxmips/ifxmips_irq.h>
-#include <asm/ifxmips/ifxmips_cgu.h>
+#include <asm/mach-ifxmips/cgu.h>
#include <asm/ifxmips/ifxmips_gptu.h>
#include <asm/ifxmips/ifxmips_pmu.h>
--- /dev/null
+//*************************************************************************
+//* Summary of definitions which are used in each peripheral *
+//*************************************************************************
+
+#ifndef peripheral_definitions_h
+#define peripheral_definitions_h
+
+////#include "cpu.h"
+//
+///* These files have to be included by each peripheral */
+//#include <sysdefs.h>
+//#include <excep.h>
+//#include <cpusubsys.h>
+//#include <sys_api.h>
+//#include <mips.h>
+//#include "SRAM_address_map.h"
+//
+///* common header files for all CPU's */
+//#include "iiu.h"
+//#include "bcu.h"
+//#include "FPI_address_map.h"
+//#include "direct_interrupts.h"
+
+/////////////////////////////////////////////////////////////////////////
+
+//extern int _clz();
+//extern void _nop();
+//extern void _sleep();
+//extern void sys_enable_int();
+
+typedef unsigned char UINT8;
+typedef signed char INT8;
+typedef unsigned short UINT16;
+typedef signed short INT16;
+typedef unsigned int UINT32;
+typedef signed int INT32;
+typedef unsigned long long UINT64;
+typedef signed long long INT64;
+
+#define REG8( addr ) (*(volatile UINT8 *) (addr))
+#define REG16( addr ) (*(volatile UINT16 *)(addr))
+#define REG32( addr ) (*(volatile UINT32 *)(addr))
+#define REG64( addr ) (*(volatile UINT64 *)(addr))
+
+/* define routine to set FPI access in Supervisor Mode */
+#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG)
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm
+/* enable all Interrupts in IIU */
+//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask
+///* get all high priority interrupt bits in IIU */
+//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED)
+///* signal ends of interrupt to IIU */
+//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit
+///* force IIU interrupt register */
+//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data
+///* get all bits of interrupt register */
+//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR)
+/* insert a NOP instruction */
+#define NOP _nop()
+/* CPU goes to power down mode until interrupt occurs */
+#define IFX_CPU_SLEEP _sleep()
+/* enable all interrupts to CPU */
+#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int()
+/* get all low priority interrupt bits in peripheral */
+#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg)
+/* clear low priority interrupt bit in peripheral */
+#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit
+/* write FPI bus */
+#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data
+#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data
+#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data
+/* read FPI bus */
+#define READ_FPI_BYTE(addr) REG8(addr)
+#define READ_FPI_16BIT(addr) REG16(addr)
+#define READ_FPI_32BIT(addr) REG32(addr)
+/* write peripheral register */
+#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
+#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
+#else //not CONFIG_CPU_LITTLE_ENDIAN
+#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
+#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
+#endif //CONFIG_CPU_LITTLE_ENDIAN
+
+/* read peripheral register */
+#define READ_PERIPHERAL_REGISTER(addr) REG32(addr)
+
+/* read/modify(or)/write peripheral register */
+#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
+/* read/modify(and)/write peripheral register */
+#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data
+
+/* CPU-independent mnemonic constants */
+/* CLC register bits */
+#define IFX_CLC_ENABLE 0x00000000
+#define IFX_CLC_DISABLE 0x00000001
+#define IFX_CLC_DISABLE_STATUS 0x00000002
+#define IFX_CLC_SUSPEND_ENABLE 0x00000004
+#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008
+#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010
+#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
+#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00
+#define IFX_CLC_RUN_DIVIDER_OFFSET 8
+#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000
+#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16
+#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
+#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
+
+/* number of cycles to wait for interrupt service routine to be called */
+#define WAIT_CYCLES 50
+
+#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */
--- /dev/null
+/*
+ * ifx_ssc.h defines some data sructures used in ifx_ssc.c
+ *
+ * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
+ *
+ *
+ */
+
+#ifndef __IFX_SSC_H
+#define __IFX_SSC_H
+#ifdef __KERNEL__
+#include <asm/ifxmips/ifx_ssc_defines.h>
+#endif //__KERNEL__
+
+#define PORT_CNT 1 // assume default value
+
+/* symbolic constants to be used in SSC routines */
+
+// ### TO DO: bad performance
+#define IFX_SSC_TXFIFO_ITL 1
+#define IFX_SSC_RXFIFO_ITL 1
+
+struct ifx_ssc_statistics {
+ unsigned int abortErr; /* abort error */
+ unsigned int modeErr; /* master/slave mode error */
+ unsigned int txOvErr; /* TX Overflow error */
+ unsigned int txUnErr; /* TX Underrun error */
+ unsigned int rxOvErr; /* RX Overflow error */
+ unsigned int rxUnErr; /* RX Underrun error */
+ unsigned int rxBytes;
+ unsigned int txBytes;
+};
+
+struct ifx_ssc_hwopts {
+ unsigned int AbortErrDetect:1; /* Abort Error detection (in slave mode) */
+ unsigned int rxOvErrDetect:1; /* Receive Overflow Error detection */
+ unsigned int rxUndErrDetect:1; /* Receive Underflow Error detection */
+ unsigned int txOvErrDetect:1; /* Transmit Overflow Error detection */
+ unsigned int txUndErrDetect:1; /* Transmit Underflow Error detection */
+ unsigned int echoMode:1; /* Echo mode */
+ unsigned int loopBack:1; /* Loopback mode */
+ unsigned int idleValue:1; /* Idle value */
+ unsigned int clockPolarity:1; /* Idle clock is high or low */
+ unsigned int clockPhase:1; /* Tx on trailing or leading edge */
+ unsigned int headingControl:1; /* LSB first or MSB first */
+ unsigned int dataWidth:6; /* from 2 up to 32 bits */
+ unsigned int masterSelect:1; /* Master or Slave mode */
+ unsigned int modeRxTx:2; /* rx/tx mode */
+ unsigned int gpoCs:8; /* choose outputs to use for chip select */
+ unsigned int gpoInv:8; /* invert GPO outputs */
+};
+
+struct ifx_ssc_frm_opts {
+ bool FrameEnable; // SFCON.SFEN
+ unsigned int DataLength; // SFCON.DLEN
+ unsigned int PauseLength; // SFCON.PLEN
+ unsigned int IdleData; // SFCON.IDAT
+ unsigned int IdleClock; // SFCON.ICLK
+ bool StopAfterPause; // SFCON.STOP
+};
+
+struct ifx_ssc_frm_status {
+ bool DataBusy; // SFSTAT.DBSY
+ bool PauseBusy; // SFSTAT.PBSY
+ unsigned int DataCount; // SFSTAT.DCNT
+ unsigned int PauseCount; // SFSTAT.PCNT
+ bool EnIntAfterData; // SFCON.IBEN
+ bool EnIntAfterPause; // SFCON.IAEN
+};
+
+typedef struct {
+ char *buf;
+ size_t len;
+} ifx_ssc_buf_item_t;
+
+// data structures for batch execution
+typedef union {
+ struct {
+ bool save_options;
+ } init;
+ ifx_ssc_buf_item_t read;
+ ifx_ssc_buf_item_t write;
+ ifx_ssc_buf_item_t rd_wr;
+ unsigned int set_baudrate;
+ struct ifx_ssc_frm_opts set_frm;
+ unsigned int set_gpo;
+ struct ifx_ssc_hwopts set_hwopts;
+} ifx_ssc_batch_cmd_param;
+
+struct ifx_ssc_batch_list {
+ unsigned int cmd;
+ ifx_ssc_batch_cmd_param cmd_param;
+ struct ifx_ssc_batch_list *next;
+};
+
+#ifdef __KERNEL__
+#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
+
+struct ifx_ssc_port {
+ unsigned long mapbase;
+ struct ifx_ssc_hwopts opts;
+ struct ifx_ssc_statistics stats;
+ struct ifx_ssc_frm_status frm_status;
+ struct ifx_ssc_frm_opts frm_opts;
+ /* wait queue for ifx_ssc_read() */
+ wait_queue_head_t rwait, pwait;
+ int port_nr;
+ char port_is_open; /* exclusive open - boolean */
+// int no_of_bits; /* number of _valid_ bits */
+// int elem_size; /* shift for element (no of bytes)*/
+ /* buffer and pointers to the read/write position */
+ char *rxbuf; /* buffer for RX */
+ char *rxbuf_end; /* buffer end pointer for RX */
+ volatile char *rxbuf_ptr; /* buffer write pointer for RX */
+ char *txbuf; /* buffer for TX */
+ char *txbuf_end; /* buffer end pointer for TX */
+ volatile char *txbuf_ptr; /* buffer read pointer for TX */
+ unsigned int baud;
+ /* each channel has its own interrupts */
+ /* (transmit/receive/error/frame) */
+ unsigned int txirq, rxirq, errirq, frmirq;
+};
+/* default values for SSC configuration */
+// values of CON
+#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */
+#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */
+#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */
+#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */
+#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */
+#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */
+#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */
+#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
+#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
+#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX
+// other values
+#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */
+#ifdef CONFIG_USE_EMULATOR
+#define IFX_SSC_DEF_BAUDRATE 10000
+#else
+#define IFX_SSC_DEF_BAUDRATE 2000000
+#endif
+#define IFX_SSC_DEF_RMC 0x10
+
+#define IFX_SSC_DEF_TXFIFO_FL 8
+#define IFX_SSC_DEF_RXFIFO_FL 1
+
+#if 1 //TODO
+#define IFX_SSC_DEF_GPO_CS 0x3 /* no chip select */
+#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */
+#else
+#error "what is ur Chip Select???"
+#endif
+#define IFX_SSC_DEF_SFCON 0 /* no serial framing */
+#if 0
+#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
+ IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
+#endif
+#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
+ IFX_SSC_R_BIT | IFX_SSC_E_BIT
+#endif /* __KERNEL__ */
+
+// batch execution commands
+#define IFX_SSC_BATCH_CMD_INIT 1
+#define IFX_SSC_BATCH_CMD_READ 2
+#define IFX_SSC_BATCH_CMD_WRITE 3
+#define IFX_SSC_BATCH_CMD_RD_WR 4
+#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5
+#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6
+#define IFX_SSC_BATCH_CMD_SET_FRM 7
+#define IFX_SSC_BATCH_CMD_SET_GPO 8
+#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9
+//#define IFX_SSC_BATCH_CMD_
+//#define IFX_SSC_BATCH_CMD_
+#define IFX_SSC_BATCH_CMD_END_EXEC 0
+
+/* Macros to configure SSC hardware */
+/* headingControl: */
+#define IFX_SSC_LSB_FIRST 0
+#define IFX_SSC_MSB_FIRST 1
+/* dataWidth: */
+#define IFX_SSC_MIN_DATA_WIDTH 2
+#define IFX_SSC_MAX_DATA_WIDTH 32
+/* master/slave mode select */
+#define IFX_SSC_MASTER_MODE 1
+#define IFX_SSC_SLAVE_MODE 0
+/* rx/tx mode */
+// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
+#define IFX_SSC_MODE_RXTX 0
+#define IFX_SSC_MODE_RX 1
+#define IFX_SSC_MODE_TX 2
+#define IFX_SSC_MODE_OFF 3
+#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
+
+/* GPO values */
+#define IFX_SSC_MAX_GPO_OUT 7
+
+#define IFX_SSC_RXREQ_BLOCK_SIZE 32768
+
+/***********************/
+/* defines for ioctl's */
+/***********************/
+#define IFX_SSC_IOCTL_MAGIC 'S'
+/* read out the statistics */
+#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
+/* clear the statistics */
+#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
+/* set the baudrate */
+#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
+/* get the current baudrate */
+#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
+/* set hardware options */
+#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
+/* get the current hardware options */
+#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
+/* set transmission mode */
+#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
+/* get the current transmission mode */
+#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
+/* abort transmission */
+#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
+#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
+
+/* set general purpose outputs */
+#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
+/* clear general purpose outputs */
+#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
+/* get general purpose outputs */
+#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
+
+/*** serial framing ***/
+/* get status of serial framing */
+#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
+/* get counter reload values and control bits */
+#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
+/* set counter reload values and control bits */
+#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
+
+/*** batch execution ***/
+/* do batch execution */
+#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
+
+#ifdef __KERNEL__
+// routines from ifx_ssc.c
+// ### TO DO
+/* kernel interface for read and write */
+ssize_t ifx_ssc_kread (int, char *, size_t);
+ssize_t ifx_ssc_kwrite (int, const char *, size_t);
+
+#ifdef CONFIG_IFX_VP_KERNEL_TEST
+void ifx_ssc_tc (void);
+#endif // CONFIG_IFX_VP_KERNEL_TEST
+
+#endif //__KERNEL__
+#endif // __IFX_SSC_H
--- /dev/null
+#ifndef IFX_SSC_DEFINES_H
+#define IFX_SSC_DEFINES_H
+
+#include "ifx_peripheral_definitions.h"
+
+/* maximum SSC FIFO size */
+#define IFX_SSC_MAX_FIFO_SIZE 32
+
+/* register map of SSC */
+
+/* address of the Clock Control Register of the SSC */
+#define IFX_SSC_CLC 0x00000000
+/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0
+ bit 1 is hardware modified*/
+#define IFX_SSC_CLC_readmask 0x00FFFFEF
+#define IFX_SSC_CLC_writemask 0x00FFFF3D
+#define IFX_SSC_CLC_hwmask 0x00000002
+#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask)
+
+/* address of Port Input Select Register of the SSC */
+#define IFX_SSC_PISEL 0x00000004
+/* IFX_SSC_PISEL register is significant in lowest three bits only */
+#define IFX_SSC_PISEL_readmask 0x00000007
+#define IFX_SSC_PISEL_writemask 0x00000007
+#define IFX_SSC_PISEL_hwmask 0x00000000
+#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask)
+
+/* address of Identification Register of the SSC */
+#define IFX_SSC_ID 0x00000008
+/* IFX_SSC_ID register is significant in no bit */
+#define IFX_SSC_ID_readmask 0x0000FF3F
+#define IFX_SSC_ID_writemask 0x00000000
+#define IFX_SSC_ID_hwmask 0x00000000
+#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask)
+
+/* address of the Control Register of the SSC */
+#define IFX_SSC_CON 0x00000010
+/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */
+#define IFX_SSC_CON_readmask 0x01DF1FFF
+#define IFX_SSC_CON_writemask 0x01DF1FFF
+#define IFX_SSC_CON_hwmask 0x00000000
+#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask)
+
+/* address of the Status Register of the SSC */
+#define IFX_SSC_STATE 0x00000014
+/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0
+ all bits except 1:0 are hardware modified */
+#define IFX_SSC_STATE_readmask 0x771F3F87
+#define IFX_SSC_STATE_writemask 0x00000000
+#define IFX_SSC_STATE_hwmask 0x771F3F84
+#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask)
+
+/* address of the Write Hardware Modified Control Register Bits of the SSC */
+#define IFX_SSC_WHBSTATE 0x00000018
+/* IFX_SSC_WHBSTATE register is write only */
+#define IFX_SSC_WHBSTATE_readmask 0x00000000
+#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF
+#define IFX_SSC_WHBSTATE_hwmask 0x00000000
+#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask)
+
+/* address of the Baudrate Timer Reload Register of the SSC */
+#define IFX_SSC_BR 0x00000040
+/* IFX_SSC_BR register is significant in bit 15 downto 0*/
+#define IFX_SSC_BR_readmask 0x0000FFFF
+#define IFX_SSC_BR_writemask 0x0000FFFF
+#define IFX_SSC_BR_hwmask 0x00000000
+#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask)
+
+/* address of the Baudrate Timer Status Register of the SSC */
+#define IFX_SSC_BRSTAT 0x00000044
+/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/
+#define IFX_SSC_BRSTAT_readmask 0x0000FFFF
+#define IFX_SSC_BRSTAT_writemask 0x00000000
+#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF
+#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask)
+
+/* address of the Transmitter Buffer Register of the SSC */
+#define IFX_SSC_TB 0x00000020
+/* IFX_SSC_TB register is significant in bit 31 downto 0*/
+#define IFX_SSC_TB_readmask 0xFFFFFFFF
+#define IFX_SSC_TB_writemask 0xFFFFFFFF
+#define IFX_SSC_TB_hwmask 0x00000000
+#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask)
+
+/* address of the Reciver Buffer Register of the SSC */
+#define IFX_SSC_RB 0x00000024
+/* IFX_SSC_RB register is significant in no bits*/
+#define IFX_SSC_RB_readmask 0xFFFFFFFF
+#define IFX_SSC_RB_writemask 0x00000000
+#define IFX_SSC_RB_hwmask 0xFFFFFFFF
+#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask)
+
+/* address of the Receive FIFO Control Register of the SSC */
+#define IFX_SSC_RXFCON 0x00000030
+/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
+#define IFX_SSC_RXFCON_readmask 0x00003F03
+#define IFX_SSC_RXFCON_writemask 0x00003F03
+#define IFX_SSC_RXFCON_hwmask 0x00000000
+#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask)
+
+/* address of the Transmit FIFO Control Register of the SSC */
+#define IFX_SSC_TXFCON 0x00000034
+/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
+#define IFX_SSC_TXFCON_readmask 0x00003F03
+#define IFX_SSC_TXFCON_writemask 0x00003F03
+#define IFX_SSC_TXFCON_hwmask 0x00000000
+#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask)
+
+/* address of the FIFO Status Register of the SSC */
+#define IFX_SSC_FSTAT 0x00000038
+/* IFX_SSC_FSTAT register is significant in no bit*/
+#define IFX_SSC_FSTAT_readmask 0x00003F3F
+#define IFX_SSC_FSTAT_writemask 0x00000000
+#define IFX_SSC_FSTAT_hwmask 0x00003F3F
+#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask)
+
+/* address of the Data Frame Control register of the SSC */
+#define IFX_SSC_SFCON 0x00000060
+#define IFX_SSC_SFCON_readmask 0xFFDFFFFD
+#define IFX_SSC_SFCON_writemask 0xFFDFFFFD
+#define IFX_SSC_SFCON_hwmask 0x00000000
+#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask)
+
+/* address of the Data Frame Status register of the SSC */
+#define IFX_SSC_SFSTAT 0x00000064
+#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3
+#define IFX_SSC_SFSTAT_writemask 0x00000000
+#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3
+#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask)
+
+/* address of the General Purpose Output Control register of the SSC */
+#define IFX_SSC_GPOCON 0x00000070
+#define IFX_SSC_GPOCON_readmask 0x0000FFFF
+#define IFX_SSC_GPOCON_writemask 0x0000FFFF
+#define IFX_SSC_GPOCON_hwmask 0x00000000
+#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask)
+
+/* address of the General Purpose Output Status register of the SSC */
+#define IFX_SSC_GPOSTAT 0x00000074
+#define IFX_SSC_GPOSTAT_readmask 0x000000FF
+#define IFX_SSC_GPOSTAT_writemask 0x00000000
+#define IFX_SSC_GPOSTAT_hwmask 0x00000000
+#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask)
+
+/* address of the Force GPO Status register of the SSC */
+#define IFX_SSC_WHBGPOSTAT 0x00000078
+#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000
+#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF
+#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000
+#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask)
+
+/* address of the Receive Request Register of the SSC */
+#define IFX_SSC_RXREQ 0x00000080
+#define IFX_SSC_RXREQ_readmask 0x0000FFFF
+#define IFX_SSC_RXREQ_writemask 0x0000FFFF
+#define IFX_SSC_RXREQ_hwmask 0x00000000
+#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask)
+
+/* address of the Receive Count Register of the SSC */
+#define IFX_SSC_RXCNT 0x00000084
+#define IFX_SSC_RXCNT_readmask 0x0000FFFF
+#define IFX_SSC_RXCNT_writemask 0x00000000
+#define IFX_SSC_RXCNT_hwmask 0x0000FFFF
+#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask)
+
+/* address of the DMA Configuration Register of the SSC */
+#define IFX_SSC_DMACON 0x000000EC
+#define IFX_SSC_DMACON_readmask 0x0000FFFF
+#define IFX_SSC_DMACON_writemask 0x00000000
+#define IFX_SSC_DMACON_hwmask 0x0000FFFF
+#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask)
+
+//------------------------------------------------------
+// interrupt register for enabling interrupts, mask register of irq_reg
+#define IFX_SSC_IRN_EN 0xF4
+// read/write
+#define IFX_SSC_IRN_EN_readmask 0x0000000F
+#define IFX_SSC_IRN_EN_writemask 0x0000000F
+#define IFX_SSC_IRN_EN_hwmask 0x00000000
+#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask)
+
+// interrupt register for accessing interrupts
+#define IFX_SSC_IRN_CR 0xF8
+// read/write
+#define IFX_SSC_IRN_CR_readmask 0x0000000F
+#define IFX_SSC_IRN_CR_writemask 0x0000000F
+#define IFX_SSC_IRN_CR_hwmask 0x0000000F
+#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask)
+
+// interrupt register for stimulating interrupts
+#define IFX_SSC_IRN_ICR 0xFC
+// read/write
+#define IFX_SSC_IRN_ICR_readmask 0x0000000F
+#define IFX_SSC_IRN_ICR_writemask 0x0000000F
+#define IFX_SSC_IRN_ICR_hwmask 0x00000000
+#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask)
+
+//---------------------------------------------------------------------
+// Number of IRQs and bitposition of IRQ
+#define IFX_SSC_NUM_IRQ 4
+#define IFX_SSC_T_BIT 0x00000001
+#define IFX_SSC_R_BIT 0x00000002
+#define IFX_SSC_E_BIT 0x00000004
+#define IFX_SSC_F_BIT 0x00000008
+
+/* bit masks for SSC registers */
+
+/* ID register */
+#define IFX_SSC_PERID_REV_MASK 0x0000001F
+#define IFX_SSC_PERID_CFG_MASK 0x00000020
+#define IFX_SSC_PERID_ID_MASK 0x0000FF00
+#define IFX_SSC_PERID_REV_OFFSET 0
+#define IFX_SSC_PERID_CFG_OFFSET 5
+#define IFX_SSC_PERID_ID_OFFSET 8
+#define IFX_SSC_PERID_ID 0x45
+#define IFX_SSC_PERID_DMA_ON 0x00000020
+#define IFX_SSC_PERID_RXFS_MASK 0x003F0000
+#define IFX_SSC_PERID_RXFS_OFFSET 16
+#define IFX_SSC_PERID_TXFS_MASK 0x3F000000
+#define IFX_SSC_PERID_TXFS_OFFSET 24
+
+/* PISEL register */
+#define IFX_SSC_PISEL_MASTER_IN_A 0x0000
+#define IFX_SSC_PISEL_MASTER_IN_B 0x0001
+#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000
+#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002
+#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000
+#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004
+
+/* IFX_SSC_CON register */
+#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000
+#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000
+#define IFX_SSC_CON_IDLE_HIGH 0x00800000
+#define IFX_SSC_CON_IDLE_LOW 0x00000000
+#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000
+#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000
+#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16
+#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000
+#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK)
+
+#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000
+#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000
+
+#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000
+#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000
+#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800
+#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000
+#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400
+#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000
+#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200
+#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000
+#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100
+#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000
+#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00
+#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000
+
+#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080
+#define IFX_SSC_CON_NO_LOOPBACK 0x00000000
+#define IFX_SSC_CON_HALF_DUPLEX 0x00000080
+#define IFX_SSC_CON_FULL_DUPLEX 0x00000000
+#define IFX_SSC_CON_CLOCK_FALL 0x00000040
+#define IFX_SSC_CON_CLOCK_RISE 0x00000000
+#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000
+#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020
+#define IFX_SSC_CON_MSB_FIRST 0x00000010
+#define IFX_SSC_CON_LSB_FIRST 0x00000000
+#define IFX_SSC_CON_ENABLE_CSB 0x00000008
+#define IFX_SSC_CON_DISABLE_CSB 0x00000000
+#define IFX_SSC_CON_INVERT_CSB 0x00000004
+#define IFX_SSC_CON_TRUE_CSB 0x00000000
+#define IFX_SSC_CON_RX_OFF 0x00000002
+#define IFX_SSC_CON_RX_ON 0x00000000
+#define IFX_SSC_CON_TX_OFF 0x00000001
+#define IFX_SSC_CON_TX_ON 0x00000000
+
+/* IFX_SSC_STATE register */
+#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28
+#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000
+#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET)
+#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24
+#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000
+#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET)
+#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16
+#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000
+#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1)
+#define IFX_SSC_STATE_BUSY 0x00002000
+#define IFX_SSC_STATE_RX_UFL 0x00001000
+#define IFX_SSC_STATE_TX_UFL 0x00000800
+#define IFX_SSC_STATE_ABORT_ERR 0x00000400
+#define IFX_SSC_STATE_RX_OFL 0x00000200
+#define IFX_SSC_STATE_TX_OFL 0x00000100
+#define IFX_SSC_STATE_MODE_ERR 0x00000080
+#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004
+#define IFX_SSC_STATE_IS_MASTER 0x00000002
+#define IFX_SSC_STATE_IS_ENABLED 0x00000001
+
+/* WHBSTATE register */
+#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001
+#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001
+#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001
+
+#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002
+#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002
+#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002
+
+#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004
+#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004
+
+#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008
+#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008
+
+#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010
+#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020
+
+#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040
+#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080
+
+#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100
+#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200
+#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400
+#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800
+#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000
+#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000
+#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000
+#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000
+#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50
+#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0
+
+/* BR register */
+#define IFX_SSC_BR_BAUDRATE_OFFSET 0
+#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF
+
+/* BR_STAT register */
+#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0
+#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF
+
+/* TB register */
+#define IFX_SSC_TB_DATA_OFFSET 0
+#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF
+
+/* RB register */
+#define IFX_SSC_RB_DATA_OFFSET 0
+#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF
+
+/* RXFCON and TXFCON registers */
+#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000
+#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001
+#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002
+#define IFX_SSC_XFCON_ITL_MASK 0x00003F00
+#define IFX_SSC_XFCON_ITL_OFFSET 8
+
+/* FSTAT register */
+#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0
+#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F
+#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8
+#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00
+
+/* GPOCON register */
+#define IFX_SSC_GPOCON_INVOUT0_POS 0
+#define IFX_SSC_GPOCON_INV_OUT0 0x00000001
+#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000
+#define IFX_SSC_GPOCON_INVOUT1_POS 1
+#define IFX_SSC_GPOCON_INV_OUT1 0x00000002
+#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000
+#define IFX_SSC_GPOCON_INVOUT2_POS 2
+#define IFX_SSC_GPOCON_INV_OUT2 0x00000003
+#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000
+#define IFX_SSC_GPOCON_INVOUT3_POS 3
+#define IFX_SSC_GPOCON_INV_OUT3 0x00000008
+#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000
+#define IFX_SSC_GPOCON_INVOUT4_POS 4
+#define IFX_SSC_GPOCON_INV_OUT4 0x00000010
+#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000
+#define IFX_SSC_GPOCON_INVOUT5_POS 5
+#define IFX_SSC_GPOCON_INV_OUT5 0x00000020
+#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000
+#define IFX_SSC_GPOCON_INVOUT6_POS 6
+#define IFX_SSC_GPOCON_INV_OUT6 0x00000040
+#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000
+#define IFX_SSC_GPOCON_INVOUT7_POS 7
+#define IFX_SSC_GPOCON_INV_OUT7 0x00000080
+#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000
+#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF
+#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000
+
+#define IFX_SSC_GPOCON_ISCSB0_POS 8
+#define IFX_SSC_GPOCON_IS_CSB0 0x00000100
+#define IFX_SSC_GPOCON_IS_GPO0 0x00000000
+#define IFX_SSC_GPOCON_ISCSB1_POS 9
+#define IFX_SSC_GPOCON_IS_CSB1 0x00000200
+#define IFX_SSC_GPOCON_IS_GPO1 0x00000000
+#define IFX_SSC_GPOCON_ISCSB2_POS 10
+#define IFX_SSC_GPOCON_IS_CSB2 0x00000400
+#define IFX_SSC_GPOCON_IS_GPO2 0x00000000
+#define IFX_SSC_GPOCON_ISCSB3_POS 11
+#define IFX_SSC_GPOCON_IS_CSB3 0x00000800
+#define IFX_SSC_GPOCON_IS_GPO3 0x00000000
+#define IFX_SSC_GPOCON_ISCSB4_POS 12
+#define IFX_SSC_GPOCON_IS_CSB4 0x00001000
+#define IFX_SSC_GPOCON_IS_GPO4 0x00000000
+#define IFX_SSC_GPOCON_ISCSB5_POS 13
+#define IFX_SSC_GPOCON_IS_CSB5 0x00002000
+#define IFX_SSC_GPOCON_IS_GPO5 0x00000000
+#define IFX_SSC_GPOCON_ISCSB6_POS 14
+#define IFX_SSC_GPOCON_IS_CSB6 0x00004000
+#define IFX_SSC_GPOCON_IS_GPO6 0x00000000
+#define IFX_SSC_GPOCON_ISCSB7_POS 15
+#define IFX_SSC_GPOCON_IS_CSB7 0x00008000
+#define IFX_SSC_GPOCON_IS_GPO7 0x00000000
+#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00
+#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000
+
+/* GPOSTAT register */
+#define IFX_SSC_GPOSTAT_OUT0 0x00000001
+#define IFX_SSC_GPOSTAT_OUT1 0x00000002
+#define IFX_SSC_GPOSTAT_OUT2 0x00000004
+#define IFX_SSC_GPOSTAT_OUT3 0x00000008
+#define IFX_SSC_GPOSTAT_OUT4 0x00000010
+#define IFX_SSC_GPOSTAT_OUT5 0x00000020
+#define IFX_SSC_GPOSTAT_OUT6 0x00000040
+#define IFX_SSC_GPOSTAT_OUT7 0x00000080
+#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF
+
+/* WHBGPOSTAT register */
+#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001
+#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002
+#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004
+#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008
+#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010
+#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020
+#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040
+#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF
+
+#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0
+#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1
+#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2
+#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3
+#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4
+#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5
+#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6
+#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7
+
+#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8
+#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100
+#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9
+#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200
+#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10
+#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400
+#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11
+#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800
+#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12
+#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000
+#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13
+#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000
+#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14
+#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000
+#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15
+#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000
+#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00
+
+/* SFCON register */
+#define IFX_SSC_SFCON_SF_ENABLE 0x00000001
+#define IFX_SSC_SFCON_SF_DISABLE 0x00000000
+#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004
+#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000
+#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008
+#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000
+#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0
+#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4
+#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000
+#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16
+#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000
+#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000
+#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18
+#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000
+#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000
+#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000
+#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000
+#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22
+#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096
+#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024
+
+#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET)
+#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET)
+#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK)
+#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
+
+/* SFSTAT register */
+#define IFX_SSC_SFSTAT_IN_DATA 0x00000001
+#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002
+#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0
+#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4
+#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000
+#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20
+
+#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET)
+#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET)
+
+/* RXREQ register */
+#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF
+#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0
+
+/* RXCNT register */
+#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF
+#define IFX_SSC_RXCNT_TODO_OFFSET 0
+
+/* DMACON register */
+#define IFX_SSC_DMACON_RXON 0x00000001
+#define IFX_SSC_DMACON_RXOFF 0x00000000
+#define IFX_SSC_DMACON_TXON 0x00000002
+#define IFX_SSC_DMACON_TXOFF 0x00000000
+#define IFX_SSC_DMACON_DMAON 0x00000003
+#define IFX_SSC_DMACON_DMAOFF 0x00000000
+#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C
+#define IFX_SSC_DMACON_CLASS_OFFSET 2
+
+/* register access macros */
+#define ifx_ssc_fstat_received_words(status) (status & 0x003F)
+#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8)
+
+#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE))
+#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON))
+#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON))
+#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE))
+#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB))
+#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB))
+#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT))
+#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR))
+
+#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET)
+#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
+
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_H__
+#define _IFXMIPS_H__
+
+#define ifxmips_r32(reg) __raw_readl(reg)
+#define ifxmips_w32(val, reg) __raw_writel(val, reg)
+#define ifxmips_w32_mask(clear, set, reg) ifxmips_w32((ifxmips_r32(reg) & ~clear) | set, reg)
+
+/*------------ GENERAL */
+
+#define BOARD_SYSTEM_TYPE "IFXMIPS"
+
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
+
+#define IFXMIPS_FLASH_START 0x10000000
+#define IFXMIPS_FLASH_MAX 0x02000000
+
+/*------------ ASC0/1 */
+
+#define IFXMIPS_ASC_BASE_ADDR (KSEG1 + 0x1E100400)
+#define IFXMIPS_ASC_BASE_DIFF (0x1E100C00 - 0x1E100400)
+
+#define IFXMIPS_ASC_FSTAT 0x0048
+#define IFXMIPS_ASC_TBUF 0x0020
+#define IFXMIPS_ASC_WHBSTATE 0x0018
+#define IFXMIPS_ASC_RBUF 0x0024
+#define IFXMIPS_ASC_STATE 0x0014
+#define IFXMIPS_ASC_IRNCR 0x00F8
+#define IFXMIPS_ASC_CLC 0x0000
+#define IFXMIPS_ASC_PISEL 0x0004
+#define IFXMIPS_ASC_TXFCON 0x0044
+#define IFXMIPS_ASC_RXFCON 0x0040
+#define IFXMIPS_ASC_CON 0x0010
+#define IFXMIPS_ASC_BG 0x0050
+#define IFXMIPS_ASC_IRNREN 0x00F4
+
+#define IFXMIPS_ASC_CLC_DISS 0x2
+#define ASC_IRNREN_RX_BUF 0x8
+#define ASC_IRNREN_TX_BUF 0x4
+#define ASC_IRNREN_ERR 0x2
+#define ASC_IRNREN_TX 0x1
+#define ASC_IRNCR_TIR 0x4
+#define ASC_IRNCR_RIR 0x2
+#define ASC_IRNCR_EIR 0x4
+#define ASCOPT_CSIZE 0x3
+#define ASCOPT_CS7 0x1
+#define ASCOPT_CS8 0x2
+#define ASCOPT_PARENB 0x4
+#define ASCOPT_STOPB 0x8
+#define ASCOPT_PARODD 0x0
+#define ASCOPT_CREAD 0x20
+#define TXFIFO_FL 1
+#define RXFIFO_FL 1
+#define TXFIFO_FULL 16
+#define ASCCLC_RMCMASK 0x0000FF00
+#define ASCCLC_RMCOFFSET 8
+#define ASCCON_M_8ASYNC 0x0
+#define ASCCON_M_7ASYNC 0x2
+#define ASCCON_ODD 0x00000020
+#define ASCCON_STP 0x00000080
+#define ASCCON_BRS 0x00000100
+#define ASCCON_FDE 0x00000200
+#define ASCCON_R 0x00008000
+#define ASCCON_FEN 0x00020000
+#define ASCCON_ROEN 0x00080000
+#define ASCCON_TOEN 0x00100000
+#define ASCSTATE_PE 0x00010000
+#define ASCSTATE_FE 0x00020000
+#define ASCSTATE_ROE 0x00080000
+#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
+#define ASCWHBSTATE_CLRREN 0x00000001
+#define ASCWHBSTATE_SETREN 0x00000002
+#define ASCWHBSTATE_CLRPE 0x00000004
+#define ASCWHBSTATE_CLRFE 0x00000008
+#define ASCWHBSTATE_CLRROE 0x00000020
+#define ASCTXFCON_TXFEN 0x0001
+#define ASCTXFCON_TXFFLU 0x0002
+#define ASCTXFCON_TXFITLMASK 0x3F00
+#define ASCTXFCON_TXFITLOFF 8
+#define ASCRXFCON_RXFEN 0x0001
+#define ASCRXFCON_RXFFLU 0x0002
+#define ASCRXFCON_RXFITLMASK 0x3F00
+#define ASCRXFCON_RXFITLOFF 8
+#define ASCFSTAT_RXFFLMASK 0x003F
+#define ASCFSTAT_TXFFLMASK 0x3F00
+#define ASCFSTAT_TXFFLOFF 8
+
+
+
+/*------------ RCU */
+#define IFXMIPS_RCU_BASE_ADDR 0xBF203000
+
+/* reset request */
+#define IFXMIPS_RCU_RST ((u32 *)(IFXMIPS_RCU_BASE_ADDR + 0x0010))
+#define IFXMIPS_RCU_RST_CPU1 (1 << 3)
+#define IFXMIPS_RCU_RST_ALL 0x40000000
+
+#define IFXMIPS_RCU_RST_REQ_DFE (1 << 7)
+#define IFXMIPS_RCU_RST_REQ_AFE (1 << 11)
+#define IFXMIPS_RCU_RST_REQ_ARC_JTAG (1 << 20)
+
+
+/*------------ GPTU */
+
+#define IFXMIPS_GPTU_BASE_ADDR 0xB8000300
+
+/* clock control register */
+#define IFXMIPS_GPTU_GPT_CLC ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0000))
+
+/* captur reload register */
+#define IFXMIPS_GPTU_GPT_CAPREL ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0030))
+
+/* timer 6 control register */
+#define IFXMIPS_GPTU_GPT_T6CON ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0020))
+
+
+/*------------ EBU */
+
+#define IFXMIPS_EBU_BASE_ADDR 0xBE105300
+
+/* bus configuration register */
+#define IFXMIPS_EBU_BUSCON0 ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0060))
+#define IFXMIPS_EBU_PCC_CON ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0090))
+#define IFXMIPS_EBU_PCC_IEN ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A4))
+#define IFXMIPS_EBU_PCC_ISTAT ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A0))
+
+
+/*------------ CGU */
+#define IFXMIPS_CGU_BASE_ADDR (KSEG1 + 0x1F103000)
+#define IFXMIPS_CGU_PLL0_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0004))
+#define IFXMIPS_CGU_PLL1_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0008))
+#define IFXMIPS_CGU_PLL2_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x000C))
+#define IFXMIPS_CGU_SYS ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010))
+#define IFXMIPS_CGU_UPDATE ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0014))
+#define IFXMIPS_CGU_IF_CLK ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018))
+#define IFXMIPS_CGU_OSC_CON ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x001C))
+#define IFXMIPS_CGU_SMD ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0020))
+#define IFXMIPS_CGU_CT1SR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0028))
+#define IFXMIPS_CGU_CT2SR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x002C))
+#define IFXMIPS_CGU_PCMCR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0030))
+#define IFXMIPS_CGU_PCI_CR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034))
+#define IFXMIPS_CGU_PD_PC ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0038))
+#define IFXMIPS_CGU_FMR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x003C))
+
+/* clock mux */
+#define IFXMIPS_CGU_SYS ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010))
+#define IFXMIPS_CGU_IFCCR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018))
+#define IFXMIPS_CGU_PCICR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034))
+
+#define CLOCK_60M 60000000
+#define CLOCK_83M 83333333
+#define CLOCK_111M 111111111
+#define CLOCK_133M 133333333
+#define CLOCK_167M 166666667
+#define CLOCK_333M 333333333
+
+
+/*------------ CGU */
+
+#define IFXMIPS_PMU_BASE_ADDR (KSEG1 + 0x1F102000)
+
+#define IFXMIPS_PMU_PWDCR ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x001C))
+#define IFXMIPS_PMU_PWDSR ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x0020))
+
+
+/*------------ ICU */
+
+#define IFXMIPS_ICU_BASE_ADDR 0xBF880200
+
+
+#define IFXMIPS_ICU_IM0_ISR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0000))
+#define IFXMIPS_ICU_IM0_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0008))
+#define IFXMIPS_ICU_IM0_IOSR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0010))
+#define IFXMIPS_ICU_IM0_IRSR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0018))
+#define IFXMIPS_ICU_IM0_IMR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0020))
+
+#define IFXMIPS_ICU_IM1_ISR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0028))
+#define IFXMIPS_ICU_IM2_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0058))
+#define IFXMIPS_ICU_IM3_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0080))
+#define IFXMIPS_ICU_IM4_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00A8))
+#define IFXMIPS_ICU_IM5_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00D0))
+
+#define IFXMIPS_ICU_OFFSET (IFXMIPS_ICU_IM1_ISR - IFXMIPS_ICU_IM0_ISR)
+
+
+/*------------ ETOP */
+
+#define IFXMIPS_PPE32_BASE_ADDR 0xBE180000
+
+#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600
+
+#define IFXMIPS_PPE32_MEM_MAP ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10000))
+#define IFXMIPS_PPE32_SRST ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10080))
+
+#define MII_MODE 1
+#define REV_MII_MODE 2
+
+/* mdio access */
+#define IFXMIPS_PPE32_MDIO_CFG ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11800))
+#define IFXMIPS_PPE32_MDIO_ACC ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11804))
+
+#define MDIO_ACC_REQUEST 0x80000000
+#define MDIO_ACC_READ 0x40000000
+#define MDIO_ACC_ADDR_MASK 0x1f
+#define MDIO_ACC_ADDR_OFFSET 0x15
+#define MDIO_ACC_REG_MASK 0xff
+#define MDIO_ACC_REG_OFFSET 0x10
+#define MDIO_ACC_VAL_MASK 0xffff
+
+/* configuration */
+#define IFXMIPS_PPE32_CFG ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1808))
+
+#define PPE32_MII_MASK 0xfffffffc
+#define PPE32_MII_NORMAL 0x8
+#define PPE32_MII_REVERSE 0xe
+
+/* packet length */
+#define IFXMIPS_PPE32_IG_PLEN_CTRL ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1820))
+
+#define PPE32_PLEN_OVER 0x5ee
+#define PPE32_PLEN_UNDER 0x400000
+
+/* enet */
+#define IFXMIPS_PPE32_ENET_MAC_CFG ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1840))
+
+#define PPE32_CGEN 0x800
+
+
+/*------------ DMA */
+#define IFXMIPS_DMA_BASE_ADDR 0xBE104100
+
+#define IFXMIPS_DMA_CS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x18))
+#define IFXMIPS_DMA_CIE ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x2C))
+#define IFXMIPS_DMA_IRNEN ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0xf4))
+#define IFXMIPS_DMA_CCTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x1C))
+#define IFXMIPS_DMA_CIS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x28))
+#define IFXMIPS_DMA_CDLEN ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x24))
+#define IFXMIPS_DMA_PS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x40))
+#define IFXMIPS_DMA_PCTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x44))
+#define IFXMIPS_DMA_CTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x10))
+#define IFXMIPS_DMA_CPOLL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x14))
+#define IFXMIPS_DMA_CDBA ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x20))
+
+
+/*------------ PCI */
+#define PCI_CR_PR_BASE_ADDR (KSEG1 + 0x1E105400)
+
+#define PCI_CR_FCI_ADDR_MAP0 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C0))
+#define PCI_CR_FCI_ADDR_MAP1 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C4))
+#define PCI_CR_FCI_ADDR_MAP2 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C8))
+#define PCI_CR_FCI_ADDR_MAP3 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00CC))
+#define PCI_CR_FCI_ADDR_MAP4 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D0))
+#define PCI_CR_FCI_ADDR_MAP5 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D4))
+#define PCI_CR_FCI_ADDR_MAP6 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D8))
+#define PCI_CR_FCI_ADDR_MAP7 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00DC))
+#define PCI_CR_CLK_CTRL ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0000))
+#define PCI_CR_PCI_MOD ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0030))
+#define PCI_CR_PC_ARB ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0080))
+#define PCI_CR_FCI_ADDR_MAP11hg ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E4))
+#define PCI_CR_BAR11MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0044))
+#define PCI_CR_BAR12MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0048))
+#define PCI_CR_BAR13MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x004C))
+#define PCI_CS_BASE_ADDR1 ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0010))
+#define PCI_CR_PCI_ADDR_MAP11 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0064))
+#define PCI_CR_FCI_BURST_LENGTH ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E8))
+#define PCI_CR_PCI_EOI ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x002C))
+
+#define PCI_CS_PR_BASE_ADDR (KSEG1 + 0x17000000)
+
+#define PCI_CS_STS_CMD ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0004))
+
+#define PCI_MASTER0_REQ_MASK_2BITS 8
+#define PCI_MASTER1_REQ_MASK_2BITS 10
+#define PCI_MASTER2_REQ_MASK_2BITS 12
+#define INTERNAL_ARB_ENABLE_BIT 0
+
+
+/*------------ WDT */
+
+#define IFXMIPS_WDT_BASE_ADDR (KSEG1 + 0x1F880000)
+
+#define IFXMIPS_BIU_WDT_CR ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F0))
+#define IFXMIPS_BIU_WDT_SR ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F8))
+
+
+/*------------ LED */
+
+#define IFXMIPS_LED_BASE_ADDR (KSEG1 + 0x1E100BB0)
+#define IFXMIPS_LED_CON0 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0000))
+#define IFXMIPS_LED_CON1 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0004))
+#define IFXMIPS_LED_CPU0 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0008))
+#define IFXMIPS_LED_CPU1 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x000C))
+#define IFXMIPS_LED_AR ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0010))
+
+#define LED_CON0_SWU (1 << 31)
+#define LED_CON0_AD1 (1 << 25)
+#define LED_CON0_AD0 (1 << 24)
+
+#define IFXMIPS_LED_2HZ (0)
+#define IFXMIPS_LED_4HZ (1 << 23)
+#define IFXMIPS_LED_8HZ (2 << 23)
+#define IFXMIPS_LED_10HZ (3 << 23)
+#define IFXMIPS_LED_MASK (0xf << 23)
+
+#define IFXMIPS_LED_UPD_SRC_FPI (1 << 31)
+#define IFXMIPS_LED_UPD_MASK (3 << 30)
+#define IFXMIPS_LED_ADSL_SRC (3 << 24)
+
+#define IFXMIPS_LED_GROUP0 (1 << 0)
+#define IFXMIPS_LED_GROUP1 (1 << 1)
+#define IFXMIPS_LED_GROUP2 (1 << 2)
+
+#define IFXMIPS_LED_RISING 0
+#define IFXMIPS_LED_FALLING (1 << 26)
+#define IFXMIPS_LED_EDGE_MASK (1 << 26)
+
+
+/*------------ GPIO */
+
+#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00)
+
+#define IFXMIPS_GPIO_P0_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010))
+#define IFXMIPS_GPIO_P1_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040))
+#define IFXMIPS_GPIO_P0_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014))
+#define IFXMIPS_GPIO_P1_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044))
+#define IFXMIPS_GPIO_P0_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018))
+#define IFXMIPS_GPIO_P1_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048))
+#define IFXMIPS_GPIO_P0_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C))
+#define IFXMIPS_GPIO_P1_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C))
+#define IFXMIPS_GPIO_P0_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020))
+#define IFXMIPS_GPIO_P1_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050))
+#define IFXMIPS_GPIO_P0_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024))
+#define IFXMIPS_GPIO_P1_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054))
+#define IFXMIPS_GPIO_P0_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028))
+#define IFXMIPS_GPIO_P1_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058))
+#define IFXMIPS_GPIO_P0_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C))
+#define IFXMIPS_GPIO_P1_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C))
+#define IFXMIPS_GPIO_P0_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030))
+#define IFXMIPS_GPIO_P1_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060))
+
+
+/*------------ SSC */
+
+#define IFXMIPS_SSC_BASE_ADDR (KSEG1 + 0x1e100800)
+
+
+#define IFXMIPS_SSC_CLC ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0000))
+#define IFXMIPS_SSC_IRN ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x00F4))
+#define IFXMIPS_SSC_SFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0060))
+#define IFXMIPS_SSC_WHBGPOSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0078))
+#define IFXMIPS_SSC_STATE ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0014))
+#define IFXMIPS_SSC_WHBSTATE ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0018))
+#define IFXMIPS_SSC_FSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0038))
+#define IFXMIPS_SSC_ID ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0008))
+#define IFXMIPS_SSC_TB ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0020))
+#define IFXMIPS_SSC_RXFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0030))
+#define IFXMIPS_SSC_TXFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0034))
+#define IFXMIPS_SSC_CON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0010))
+#define IFXMIPS_SSC_GPOSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0074))
+#define IFXMIPS_SSC_RB ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0024))
+#define IFXMIPS_SSC_RXCNT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084))
+#define IFXMIPS_SSC_GPOCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0070))
+#define IFXMIPS_SSC_BR ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0040))
+#define IFXMIPS_SSC_RXREQ ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0080))
+#define IFXMIPS_SSC_SFSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0064))
+#define IFXMIPS_SSC_RXCNT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084))
+
+
+/*------------ MEI */
+
+#define IFXMIPS_MEI_BASE_ADDR (KSEG1 + 0x1E116000)
+
+#define MEI_DATA_XFR ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0000))
+#define MEI_VERSION ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0004))
+#define MEI_ARC_GP_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0008))
+#define MEI_DATA_XFR_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x000C))
+#define MEI_XFR_ADDR ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0010))
+#define MEI_MAX_WAIT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0014))
+#define MEI_TO_ARC_INT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0018))
+#define ARC_TO_MEI_INT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x001C))
+#define ARC_TO_MEI_INT_MASK ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0020))
+#define MEI_DEBUG_WAD ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0024))
+#define MEI_DEBUG_RAD ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0028))
+#define MEI_DEBUG_DATA ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x002C))
+#define MEI_DEBUG_DEC ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0030))
+#define MEI_CONFIG ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0034))
+#define MEI_RST_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0038))
+#define MEI_DBG_MASTER ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x003C))
+#define MEI_CLK_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0040))
+#define MEI_BIST_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0044))
+#define MEI_BIST_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0048))
+#define MEI_XDATA_BASE_SH ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x004c))
+#define MEI_XDATA_BASE ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0050))
+#define MEI_XMEM_BAR_BASE ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054))
+#define MEI_XMEM_BAR0 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054))
+#define MEI_XMEM_BAR1 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0058))
+#define MEI_XMEM_BAR2 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x005C))
+#define MEI_XMEM_BAR3 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0060))
+#define MEI_XMEM_BAR4 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0064))
+#define MEI_XMEM_BAR5 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0068))
+#define MEI_XMEM_BAR6 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x006C))
+#define MEI_XMEM_BAR7 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0070))
+#define MEI_XMEM_BAR8 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0074))
+#define MEI_XMEM_BAR9 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0078))
+#define MEI_XMEM_BAR10 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x007C))
+#define MEI_XMEM_BAR11 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0080))
+#define MEI_XMEM_BAR12 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0084))
+#define MEI_XMEM_BAR13 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0088))
+#define MEI_XMEM_BAR14 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x008C))
+#define MEI_XMEM_BAR15 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0090))
+#define MEI_XMEM_BAR16 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0094))
+
+
+/*------------ DEU */
+
+#define IFXMIPS_DEU_BASE (KSEG1 + 0x1E103100)
+#define IFXMIPS_DEU_CLK ((u32 *)(IFXMIPS_DEU_BASE + 0x0000))
+#define IFXMIPS_DEU_ID ((u32 *)(IFXMIPS_DEU_BASE + 0x0008))
+
+#define IFXMIPS_DES_CON ((u32 *)(IFXMIPS_DEU_BASE + 0x0010))
+#define IFXMIPS_DES_IHR ((u32 *)(IFXMIPS_DEU_BASE + 0x0014))
+#define IFXMIPS_DES_ILR ((u32 *)(IFXMIPS_DEU_BASE + 0x0018))
+#define IFXMIPS_DES_K1HR ((u32 *)(IFXMIPS_DEU_BASE + 0x001C))
+#define IFXMIPS_DES_K1LR ((u32 *)(IFXMIPS_DEU_BASE + 0x0020))
+#define IFXMIPS_DES_K3HR ((u32 *)(IFXMIPS_DEU_BASE + 0x0024))
+#define IFXMIPS_DES_K3LR ((u32 *)(IFXMIPS_DEU_BASE + 0x0028))
+#define IFXMIPS_DES_IVHR ((u32 *)(IFXMIPS_DEU_BASE + 0x002C))
+#define IFXMIPS_DES_IVLR ((u32 *)(IFXMIPS_DEU_BASE + 0x0030))
+#define IFXMIPS_DES_OHR ((u32 *)(IFXMIPS_DEU_BASE + 0x0040))
+#define IFXMIPS_DES_OLR ((u32 *)(IFXMIPS_DEU_BASE + 0x0050))
+#define IFXMIPS_AES_CON ((u32 *)(IFXMIPS_DEU_BASE + 0x0050))
+#define IFXMIPS_AES_ID3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0054))
+#define IFXMIPS_AES_ID2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0058))
+#define IFXMIPS_AES_ID1R ((u32 *)(IFXMIPS_DEU_BASE + 0x005C))
+#define IFXMIPS_AES_ID0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0060))
+#define IFXMIPS_AES_K7R ((u32 *)(IFXMIPS_DEU_BASE + 0x0064))
+#define IFXMIPS_AES_K6R ((u32 *)(IFXMIPS_DEU_BASE + 0x0068))
+#define IFXMIPS_AES_K5R ((u32 *)(IFXMIPS_DEU_BASE + 0x006C))
+#define IFXMIPS_AES_K4R ((u32 *)(IFXMIPS_DEU_BASE + 0x0070))
+#define IFXMIPS_AES_K3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0074))
+#define IFXMIPS_AES_K2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0078))
+#define IFXMIPS_AES_K1R ((u32 *)(IFXMIPS_DEU_BASE + 0x007C))
+#define IFXMIPS_AES_K0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0080))
+#define IFXMIPS_AES_IV3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0084))
+#define IFXMIPS_AES_IV2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0088))
+#define IFXMIPS_AES_IV1R ((u32 *)(IFXMIPS_DEU_BASE + 0x008C))
+#define IFXMIPS_AES_IV0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0090))
+#define IFXMIPS_AES_0D3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0094))
+#define IFXMIPS_AES_0D2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0098))
+#define IFXMIPS_AES_OD1R ((u32 *)(IFXMIPS_DEU_BASE + 0x009C))
+#define IFXMIPS_AES_OD0R ((u32 *)(IFXMIPS_DEU_BASE + 0x00A0))
+
+/*------------ FUSE */
+
+#define IFXMIPS_FUSE_BASE_ADDR (KSEG1 + 0x1F107354)
+
+
+/*------------ MPS */
+
+#define IFXMIPS_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
+#define IFXMIPS_MPS_SRAM ((u32 *)(KSEG1 + 0x1F200000))
+
+#define IFXMIPS_MPS_CHIPID ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0344))
+#define IFXMIPS_MPS_VC0ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0000))
+#define IFXMIPS_MPS_VC1ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0004))
+#define IFXMIPS_MPS_VC2ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0008))
+#define IFXMIPS_MPS_VC3ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x000C))
+#define IFXMIPS_MPS_RVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0010))
+#define IFXMIPS_MPS_RVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0014))
+#define IFXMIPS_MPS_RVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0018))
+#define IFXMIPS_MPS_RVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x001C))
+#define IFXMIPS_MPS_SVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0020))
+#define IFXMIPS_MPS_SVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0024))
+#define IFXMIPS_MPS_SVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0028))
+#define IFXMIPS_MPS_SVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x002C))
+#define IFXMIPS_MPS_CVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0030))
+#define IFXMIPS_MPS_CVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0034))
+#define IFXMIPS_MPS_CVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0038))
+#define IFXMIPS_MPS_CVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x003C))
+#define IFXMIPS_MPS_RAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0040))
+#define IFXMIPS_MPS_RAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0044))
+#define IFXMIPS_MPS_SAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0048))
+#define IFXMIPS_MPS_SAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x004C))
+#define IFXMIPS_MPS_CAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0050))
+#define IFXMIPS_MPS_CAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0054))
+#define IFXMIPS_MPS_AD0ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0058))
+#define IFXMIPS_MPS_AD1ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x005C))
+
+#define IFXMIPS_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
+#define IFXMIPS_MPS_CHIPID_VERSION_SET(value) ((((1 << 4) - 1) & (value)) << 28)
+#define IFXMIPS_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1))
+#define IFXMIPS_MPS_CHIPID_PARTNUM_SET(value) ((((1 << 16) - 1) & (value)) << 12)
+#define IFXMIPS_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1))
+#define IFXMIPS_MPS_CHIPID_MANID_SET(value) ((((1 << 10) - 1) & (value)) << 1)
+
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+#ifndef _IFXMIPS_DMA_H__
+#define _IFXMIPS_DMA_H__
+
+#define RCV_INT 1
+#define TX_BUF_FULL_INT 2
+#define TRANSMIT_CPT_INT 4
+#define IFXMIPS_DMA_CH_ON 1
+#define IFXMIPS_DMA_CH_OFF 0
+#define IFXMIPS_DMA_CH_DEFAULT_WEIGHT 100
+
+enum attr_t{
+ TX = 0,
+ RX = 1,
+ RESERVED = 2,
+ DEFAULT = 3,
+};
+
+#define DMA_OWN 1
+#define CPU_OWN 0
+#define DMA_MAJOR 250
+
+#define DMA_DESC_OWN_CPU 0x0
+#define DMA_DESC_OWN_DMA 0x80000000
+#define DMA_DESC_CPT_SET 0x40000000
+#define DMA_DESC_SOP_SET 0x20000000
+#define DMA_DESC_EOP_SET 0x10000000
+
+#define MISCFG_MASK 0x40
+#define RDERR_MASK 0x20
+#define CHOFF_MASK 0x10
+#define DESCPT_MASK 0x8
+#define DUR_MASK 0x4
+#define EOP_MASK 0x2
+
+#define DMA_DROP_MASK (1<<31)
+
+#define IFXMIPS_DMA_RX -1
+#define IFXMIPS_DMA_TX 1
+
+struct dma_chan_map {
+ const char *dev_name;
+ enum attr_t dir;
+ int pri;
+ int irq;
+ int rel_chan_no;
+};
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+struct rx_desc {
+ u32 data_length:16;
+ volatile u32 reserved:7;
+ volatile u32 byte_offset:2;
+ volatile u32 Burst_length_offset:3;
+ volatile u32 EoP:1;
+ volatile u32 Res:1;
+ volatile u32 C:1;
+ volatile u32 OWN:1;
+ volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
+};
+
+struct tx_desc {
+ volatile u32 data_length:16;
+ volatile u32 reserved1:7;
+ volatile u32 byte_offset:5;
+ volatile u32 EoP:1;
+ volatile u32 SoP:1;
+ volatile u32 C:1;
+ volatile u32 OWN:1;
+ volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
+};
+#else /* BIG */
+struct rx_desc {
+ union {
+ struct {
+ volatile u32 OWN:1;
+ volatile u32 C:1;
+ volatile u32 SoP:1;
+ volatile u32 EoP:1;
+ volatile u32 Burst_length_offset:3;
+ volatile u32 byte_offset:2;
+ volatile u32 reserve:7;
+ volatile u32 data_length:16;
+ } field;
+ volatile u32 word;
+ } status;
+ volatile u32 Data_Pointer;
+};
+
+struct tx_desc {
+ union {
+ struct {
+ volatile u32 OWN:1;
+ volatile u32 C:1;
+ volatile u32 SoP:1;
+ volatile u32 EoP:1;
+ volatile u32 byte_offset:5;
+ volatile u32 reserved:7;
+ volatile u32 data_length:16;
+ } field;
+ volatile u32 word;
+ } status;
+ volatile u32 Data_Pointer;
+};
+#endif /* ENDIAN */
+
+struct dma_channel_info {
+ /* relative channel number */
+ int rel_chan_no;
+ /* class for this channel for QoS */
+ int pri;
+ /* specify byte_offset */
+ int byte_offset;
+ /* direction */
+ int dir;
+ /* irq number */
+ int irq;
+ /* descriptor parameter */
+ int desc_base;
+ int desc_len;
+ int curr_desc;
+ int prev_desc; /* only used if it is a tx channel*/
+ /* weight setting for WFQ algorithm*/
+ int weight;
+ int default_weight;
+ int packet_size;
+ int burst_len;
+ /* on or off of this channel */
+ int control;
+ /* optional information for the upper layer devices */
+#if defined(CONFIG_IFXMIPS_ETHERNET_D2) || defined(CONFIG_IFXMIPS_PPA)
+ void *opt[64];
+#else
+ void *opt[25];
+#endif
+ /* Pointer to the peripheral device who is using this channel */
+ void *dma_dev;
+ /* channel operations */
+ void (*open)(struct dma_channel_info *pCh);
+ void (*close)(struct dma_channel_info *pCh);
+ void (*reset)(struct dma_channel_info *pCh);
+ void (*enable_irq)(struct dma_channel_info *pCh);
+ void (*disable_irq)(struct dma_channel_info *pCh);
+};
+
+struct dma_device_info {
+ /* device name of this peripheral */
+ char device_name[15];
+ int reserved;
+ int tx_burst_len;
+ int rx_burst_len;
+ int default_weight;
+ int current_tx_chan;
+ int current_rx_chan;
+ int num_tx_chan;
+ int num_rx_chan;
+ int max_rx_chan_num;
+ int max_tx_chan_num;
+ struct dma_channel_info *tx_chan[20];
+ struct dma_channel_info *rx_chan[20];
+ /*functions, optional*/
+ u8 *(*buffer_alloc)(int len, int *offset, void **opt);
+ void (*buffer_free)(u8 *dataptr, void *opt);
+ int (*intr_handler)(struct dma_device_info *info, int status);
+ void *priv; /* used by peripheral driver only */
+};
+
+struct dma_device_info *dma_device_reserve(char *dev_name);
+void dma_device_release(struct dma_device_info *dev);
+void dma_device_register(struct dma_device_info *info);
+void dma_device_unregister(struct dma_device_info *info);
+int dma_device_read(struct dma_device_info *info, u8 **dataptr, void **opt);
+int dma_device_write(struct dma_device_info *info, u8 *dataptr, int len,
+ void *opt);
+
+#endif
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_EBU_H__
+#define _IFXMIPS_EBU_H__
+
+extern spinlock_t ebu_lock;
+
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_GPIO_H__
+#define _IFXMIPS_GPIO_H__
+
+extern int ifxmips_port_reserve_pin(unsigned int port, unsigned int pin);
+extern int ifxmips_port_free_pin(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_open_drain(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_open_drain(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_pudsel(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_pudsel(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_puden(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_puden(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_stoff(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_stoff(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_dir_out(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_dir_in(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_output(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_output(unsigned int port, unsigned int pin);
+extern int ifxmips_port_get_input(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_altsel0(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_altsel0(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_altsel1(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_altsel1(unsigned int port, unsigned int pin);
+
+#endif
--- /dev/null
+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
+
+
+/******************************************************************************
+ Copyright (c) 2002, Infineon Technologies. All rights reserved.
+
+ No Warranty
+ Because the program is licensed free of charge, there is no warranty for
+ the program, to the extent permitted by applicable law. Except when
+ otherwise stated in writing the copyright holders and/or other parties
+ provide the program "as is" without warranty of any kind, either
+ expressed or implied, including, but not limited to, the implied
+ warranties of merchantability and fitness for a particular purpose. The
+ entire risk as to the quality and performance of the program is with
+ you. should the program prove defective, you assume the cost of all
+ necessary servicing, repair or correction.
+
+ In no event unless required by applicable law or agreed to in writing
+ will any copyright holder, or any other party who may modify and/or
+ redistribute the program as permitted above, be liable to you for
+ damages, including any general, special, incidental or consequential
+ damages arising out of the use or inability to use the program
+ (including but not limited to loss of data or data being rendered
+ inaccurate or losses sustained by you or third parties or a failure of
+ the program to operate with any other programs), even if such holder or
+ other party has been advised of the possibility of such damages.
+******************************************************************************/
+
+
+/*
+ * ####################################
+ * Definition
+ * ####################################
+ */
+
+/*
+ * Available Timer/Counter Index
+ */
+#define TIMER(n, X) (n * 2 + (X ? 1 : 0))
+#define TIMER_ANY 0x00
+#define TIMER1A TIMER(1, 0)
+#define TIMER1B TIMER(1, 1)
+#define TIMER2A TIMER(2, 0)
+#define TIMER2B TIMER(2, 1)
+#define TIMER3A TIMER(3, 0)
+#define TIMER3B TIMER(3, 1)
+
+/*
+ * Flag of Timer/Counter
+ * These flags specify the way in which timer is configured.
+ */
+/* Bit size of timer/counter. */
+#define TIMER_FLAG_16BIT 0x0000
+#define TIMER_FLAG_32BIT 0x0001
+/* Switch between timer and counter. */
+#define TIMER_FLAG_TIMER 0x0000
+#define TIMER_FLAG_COUNTER 0x0002
+/* Stop or continue when overflowing/underflowing. */
+#define TIMER_FLAG_ONCE 0x0000
+#define TIMER_FLAG_CYCLIC 0x0004
+/* Count up or counter down. */
+#define TIMER_FLAG_UP 0x0000
+#define TIMER_FLAG_DOWN 0x0008
+/* Count on specific level or edge. */
+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040
+#define TIMER_FLAG_RISE_EDGE 0x0010
+#define TIMER_FLAG_FALL_EDGE 0x0020
+#define TIMER_FLAG_ANY_EDGE 0x0030
+/* Signal is syncronous to module clock or not. */
+#define TIMER_FLAG_UNSYNC 0x0000
+#define TIMER_FLAG_SYNC 0x0080
+/* Different interrupt handle type. */
+#define TIMER_FLAG_NO_HANDLE 0x0000
+#if defined(__KERNEL__)
+ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100
+#endif // defined(__KERNEL__)
+#define TIMER_FLAG_SIGNAL 0x0300
+/* Internal clock source or external clock source */
+#define TIMER_FLAG_INT_SRC 0x0000
+#define TIMER_FLAG_EXT_SRC 0x1000
+
+
+/*
+ * ioctl Command
+ */
+#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */
+#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */
+#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */
+#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */
+#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */
+#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/
+#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */
+#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */
+
+/*
+ * Data Type Used to Call ioctl
+ */
+struct gptu_ioctl_param {
+ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
+ * GPTU_SET_COUNTER, this field is ID of expected *
+ * timer/counter. If it's zero, a timer/counter would *
+ * be dynamically allocated and ID would be stored in *
+ * this field. *
+ * In command GPTU_GET_COUNT_VALUE, this field is *
+ * ignored. *
+ * In other command, this field is ID of timer/counter *
+ * allocated. */
+ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
+ * GPTU_SET_COUNTER, this field contains flags to *
+ * specify how to configure timer/counter. *
+ * In command GPTU_START_TIMER, zero indicate start *
+ * and non-zero indicate resume timer/counter. *
+ * In other command, this field is ignored. */
+ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains *
+ * init/reload value. *
+ * In command GPTU_SET_TIMER, this field contains *
+ * frequency (0.001Hz) of timer. *
+ * In command GPTU_GET_COUNT_VALUE, current count *
+ * value would be stored in this field. *
+ * In command GPTU_CALCULATE_DIVIDER, this field *
+ * contains frequency wanted, and after calculation, *
+ * divider would be stored in this field to overwrite *
+ * the frequency. *
+ * In other command, this field is ignored. */
+ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
+ * if signal is required, this field contains process *
+ * ID to which signal would be sent. *
+ * In other command, this field is ignored. */
+ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
+ * if signal is required, this field contains signal *
+ * number which would be sent. *
+ * In other command, this field is ignored. */
+};
+
+/*
+ * ####################################
+ * Data Type
+ * ####################################
+ */
+typedef void (*timer_callback)(unsigned long arg);
+
+extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
+extern int ifxmips_free_timer(unsigned int);
+extern int ifxmips_start_timer(unsigned int, int);
+extern int ifxmips_stop_timer(unsigned int);
+extern int ifxmips_reset_counter_flags(u32 timer, u32 flags);
+extern int ifxmips_get_count_value(unsigned int, unsigned long *);
+extern u32 ifxmips_cal_divider(unsigned long);
+extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
+extern int ifxmips_set_counter(unsigned int timer, unsigned int flag,
+ u32 reload, unsigned long arg1, unsigned long arg2);
+
+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_IRQ__
+#define _IFXMIPS_IRQ__
+
+#define INT_NUM_IRQ0 8
+#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
+#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
+#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
+#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
+#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define IFXMIPSASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 7))
+#define IFXMIPSASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 2)
+#define IFXMIPSASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 3)
+
+#define IFXMIPS_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
+#define IFXMIPS_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
+#define IFXMIPS_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
+
+#define IFXMIPS_MEI_INT (INT_NUM_IM1_IRL0 + 23)
+
+#define IFXMIPS_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
+#define IFXMIPS_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
+
+#define MIPS_CPU_TIMER_IRQ 7
+
+#define IFXMIPS_DMA_CH0_INT (INT_NUM_IM2_IRL0)
+#define IFXMIPS_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
+#define IFXMIPS_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
+#define IFXMIPS_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
+#define IFXMIPS_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
+#define IFXMIPS_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
+#define IFXMIPS_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
+#define IFXMIPS_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
+#define IFXMIPS_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
+#define IFXMIPS_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
+#define IFXMIPS_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
+#define IFXMIPS_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
+#define IFXMIPS_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
+#define IFXMIPS_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
+#define IFXMIPS_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
+#define IFXMIPS_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
+#define IFXMIPS_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
+#define IFXMIPS_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
+#define IFXMIPS_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
+#define IFXMIPS_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
+
+#define IFXMIPS_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24)
+
+#define IFXMIPS_USB_INT (INT_NUM_IM4_IRL0 + 22)
+#define IFXMIPS_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
+
+
+extern void ifxmips_mask_and_ack_irq(unsigned int irq_nr);
+
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_LED_H__
+#define _IFXMIPS_LED_H__
+
+extern void ifxmips_led_set(unsigned int led);
+extern void ifxmips_led_clear(unsigned int led);
+extern void ifxmips_led_blink_set(unsigned int led);
+extern void ifxmips_led_blink_clear(unsigned int led);
+
+#endif
--- /dev/null
+/******************************************************************************
+**
+** FILE NAME : danube_mei.h
+** PROJECT : Danube
+** MODULES : MEI
+**
+** DATE : 1 Jan 2006
+** AUTHOR : TC Chen
+** DESCRIPTION : MEI Driver
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Version $Date $Author $Comment
+*******************************************************************************/
+#ifndef _IFXMIPS_MEI_H
+#define _IFXMIPS_MEI_H
+/////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#include "ifxmips_mei_app.h"
+
+#define IFXMIPS_MEI_DEBUG
+#define IFXMIPS_MEI_CMV_EXTRA
+#define IFXMIPS_MEI_MAJOR 106
+
+/*
+** Define where in ME Processor's memory map the Stratify chip lives
+*/
+
+#define MAXSWAPSIZE 8 * 1024 //8k *(32bits)
+
+// Mailboxes
+#define MSG_LENGTH 16 // x16 bits
+#define YES_REPLY 1
+#define NO_REPLY 0
+
+#define CMV_TIMEOUT 100 //jiffies
+#define MIB_INTERVAL 10000 //msec
+
+/*** Bit definitions ***/
+
+#define FALSE 0
+#define TRUE 1
+#define BIT0 1<<0
+#define BIT1 1<<1
+#define BIT2 1<<2
+#define BIT3 1<<3
+#define BIT4 1<<4
+#define BIT5 1<<5
+#define BIT6 1<<6
+#define BIT7 1<<7
+#define BIT8 1<<8
+#define BIT9 1<<9
+#define BIT10 1<<10
+#define BIT11 1<<11
+#define BIT12 1<<12
+#define BIT13 1<<13
+#define BIT14 1<<14
+#define BIT15 1<<15
+#define BIT16 1<<16
+#define BIT17 1<<17
+#define BIT18 1<<18
+#define BIT19 1<<19
+#define BIT20 1<<20
+#define BIT21 1<<21
+#define BIT22 1<<22
+#define BIT23 1<<23
+#define BIT24 1<<24
+#define BIT25 1<<25
+#define BIT26 1<<26
+#define BIT27 1<<27
+#define BIT28 1<<28
+#define BIT29 1<<29
+#define BIT30 1<<30
+#define BIT31 1<<31
+
+// ARC register addresss
+#define ARC_STATUS 0x0
+#define ARC_LP_START 0x2
+#define ARC_LP_END 0x3
+#define ARC_DEBUG 0x5
+#define ARC_INT_MASK 0x10A
+
+#define IRAM0_BASE (0x00000)
+#define IRAM1_BASE (0x04000)
+#define BRAM_BASE (0x0A000)
+
+#define ADSL_BASE (0x20000)
+#define CRI_BASE (ADSL_BASE + 0x11F00)
+#define CRI_CCR0 (CRI_BASE + 0x00)
+#define CRI_RST (CRI_BASE + 0x04*4)
+#define ADSL_DILV_BASE (ADSL_BASE+0x20000)
+
+//
+#define IRAM0_ADDR_BIT_MASK 0xFFF
+#define IRAM1_ADDR_BIT_MASK 0xFFF
+#define BRAM_ADDR_BIT_MASK 0xFFF
+#define RX_DILV_ADDR_BIT_MASK 0x1FFF
+
+// CRI_CCR0 Register definitions
+#define CLK_2M_MODE_ENABLE BIT6
+#define ACL_CLK_MODE_ENABLE BIT4
+#define FDF_CLK_MODE_ENABLE BIT2
+#define STM_CLK_MODE_ENABLE BIT0
+
+// CRI_RST Register definitions
+#define FDF_SRST BIT3
+#define MTE_SRST BIT2
+#define FCI_SRST BIT1
+#define AAI_SRST BIT0
+
+// MEI_TO_ARC_INTERRUPT Register definitions
+#define MEI_TO_ARC_INT1 BIT3
+#define MEI_TO_ARC_INT0 BIT2
+#define MEI_TO_ARC_CS_DONE BIT1 //need to check
+#define MEI_TO_ARC_MSGAV BIT0
+
+// ARC_TO_MEI_INTERRUPT Register definitions
+#define ARC_TO_MEI_INT1 BIT8
+#define ARC_TO_MEI_INT0 BIT7
+#define ARC_TO_MEI_CS_REQ BIT6
+#define ARC_TO_MEI_DBG_DONE BIT5
+#define ARC_TO_MEI_MSGACK BIT4
+#define ARC_TO_MEI_NO_ACCESS BIT3
+#define ARC_TO_MEI_CHECK_AAITX BIT2
+#define ARC_TO_MEI_CHECK_AAIRX BIT1
+#define ARC_TO_MEI_MSGAV BIT0
+
+// ARC_TO_MEI_INTERRUPT_MASK Register definitions
+#define GP_INT1_EN BIT8
+#define GP_INT0_EN BIT7
+#define CS_REQ_EN BIT6
+#define DBG_DONE_EN BIT5
+#define MSGACK_EN BIT4
+#define NO_ACC_EN BIT3
+#define AAITX_EN BIT2
+#define AAIRX_EN BIT1
+#define MSGAV_EN BIT0
+
+#define MEI_SOFT_RESET BIT0
+
+#define HOST_MSTR BIT0
+
+#define JTAG_MASTER_MODE 0x0
+#define MEI_MASTER_MODE HOST_MSTR
+
+// MEI_DEBUG_DECODE Register definitions
+#define MEI_DEBUG_DEC_MASK (0x3)
+#define MEI_DEBUG_DEC_AUX_MASK (0x0)
+#define MEI_DEBUG_DEC_DMP1_MASK (0x1)
+#define MEI_DEBUG_DEC_DMP2_MASK (0x2)
+#define MEI_DEBUG_DEC_CORE_MASK (0x3)
+
+#define AUX_STATUS (0x0)
+// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
+// page swap requests.
+#define MEI_TO_ARC_MAILBOX (0xDFD0)
+#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C)
+
+#define ARC_TO_MEI_MAILBOX (0xDFA0)
+#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C)
+
+// Codeswap request messages are indicated by setting BIT31
+#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000)
+
+// Clear Eoc messages received are indicated by setting BIT17
+#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000)
+
+/*
+** Swap page header
+*/
+// Page must be loaded at boot time if size field has BIT31 set
+#define BOOT_FLAG (BIT31)
+#define BOOT_FLAG_MASK ~BOOT_FLAG
+
+#define FREE_RELOAD 1
+#define FREE_SHOWTIME 2
+#define FREE_ALL 3
+
+#define IFX_POP_EOC_DONE 0
+#define IFX_POP_EOC_FAIL -1
+
+#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered
+
+// marcos
+#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
+#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr)))
+#define SET_BIT(reg, mask) reg |= (mask)
+#define CLEAR_BIT(reg, mask) reg &= (~mask)
+#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
+#define SET_BITS(reg, mask) SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
+
+#define ALIGN_SIZE ( 1L<<10 ) //1K size align
+#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
+
+// swap marco
+#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
+#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
+
+// Swap page header describes size in 32-bit words, load location, and image offset
+// for program and/or data segments
+typedef struct _arc_swp_page_hdr {
+ u32 p_offset; //Offset bytes of progseg from beginning of image
+ u32 p_dest; //Destination addr of progseg on processor
+ u32 p_size; //Size in 32-bitwords of program segment
+ u32 d_offset; //Offset bytes of dataseg from beginning of image
+ u32 d_dest; //Destination addr of dataseg on processor
+ u32 d_size; //Size in 32-bitwords of data segment
+} ARC_SWP_PAGE_HDR;
+
+#ifdef CONFIG_PROC_FS
+typedef struct reg_entry {
+ int *flag;
+ char name[30]; // big enough to hold names
+ char description[100]; // big enough to hold description
+ unsigned short low_ino;
+} reg_entry_t;
+#endif
+
+/*
+** Swap image header
+*/
+#define GET_PROG 0 // Flag used for program mem segment
+#define GET_DATA 1 // Flag used for data mem segment
+
+// Image header contains size of image, checksum for image, and count of
+// page headers. Following that are 'count' page headers followed by
+// the code and/or data segments to be loaded
+typedef struct _arc_img_hdr {
+ u32 size; // Size of binary image in bytes
+ u32 checksum; // Checksum for image
+ u32 count; // Count of swp pages in image
+ ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy
+} ARC_IMG_HDR;
+
+typedef struct smmu_mem_info {
+ int type;
+ unsigned long nCopy;
+ unsigned long size;
+ unsigned char *address;
+ unsigned char *org_address;
+} smmu_mem_info_t;
+
+/*
+** Native size for the Stratiphy interface is 32-bits. All reads and writes
+** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or
+** byte data. Read routines are provided. Write routines are probably a bad idea, as the
+** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle
+** could very well have unintended results.
+*/
+MEI_ERROR meiCMV (u16 *, int, u16 *); // first arg is CMV to ARC, second to indicate whether need reply
+
+MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize);
+extern int ifx_mei_hdlc_send (char *hdlc_pkt, int hdlc_pkt_len);
+extern int ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len);
+#if defined(__KERNEL__) || defined (IFXMIPS_PORT_RTEMS)
+extern void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size,
+ u16 * data, u16 * CMVMSG);
+int ifx_mei_hdlc_send (char *, int);
+int ifx_mei_hdlc_read (char *, int);
+#endif
+
+#endif
--- /dev/null
+/******************************************************************************
+**
+** FILE NAME : ifxmips_mei_app.h
+** PROJECT : Danube
+** MODULES : MEI
+**
+** DATE : 1 Jan 2006
+** AUTHOR : TC Chen
+** DESCRIPTION : MEI Driver
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Version $Date $Author $Comment
+*******************************************************************************/
+#ifndef _IFXMIPS_MEI_APP_H
+#define _IFXMIPS_MEI_APP_H
+ // ioctl control
+#define IFXMIPS_MEI_START 300
+#define IFXMIPS_MEI_REPLY 301
+#define IFXMIPS_MEI_NOREPLY 302
+
+#define IFXMIPS_MEI_RESET 303
+#define IFXMIPS_MEI_REBOOT 304
+#define IFXMIPS_MEI_HALT 305
+#define IFXMIPS_MEI_CMV_WINHOST 306
+#define IFXMIPS_MEI_CMV_READ 307
+#define IFXMIPS_MEI_CMV_WRITE 308
+#define IFXMIPS_MEI_MIB_DAEMON 309
+#define IFXMIPS_MEI_SHOWTIME 310
+#define IFXMIPS_MEI_REMOTE 311
+#define IFXMIPS_MEI_READDEBUG 312
+#define IFXMIPS_MEI_WRITEDEBUG 313
+#define IFXMIPS_MEI_LOP 314
+
+#define IFXMIPS_MEI_PCM_SETUP 315
+#define IFXMIPS_MEI_PCM_START_TIMER 316
+#define IFXMIPS_MEI_PCM_STOP_TIMER 317
+#define IFXMIPS_MEI_PCM_CHECK 318
+#define IFXMIPS_MEI_GET_EOC_LEN 319
+#define IFXMIPS_MEI_GET_EOC_DATA 320
+#define IFXMIPS_MEI_PCM_GETDATA 321
+#define IFXMIPS_MEI_PCM_GPIO 322
+#define IFXMIPS_MEI_EOC_SEND 323
+#define IFXMIPS_MEI_DOWNLOAD 326
+#define IFXMIPS_MEI_JTAG_ENABLE 327
+#define IFXMIPS_MEI_RUN 328
+#define IFXMIPS_MEI_DEBUG_MODE 329
+
+/* Loop diagnostics mode of the ADSL line related constants */
+#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 330
+#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 331
+#define LOOP_DIAGNOSTIC_MODE_COMPLETE 332
+#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 333
+
+/* L3 Power Mode */
+/* Get current Power Moaagement Mode Status*/
+#define GET_POWER_MANAGEMENT_MODE 334
+/* Set L3 Power Mode /disable L3 power mode */
+#define SET_L3_POWER_MODE 335
+
+/* get current dual latency configuration */
+#define GET_ADSL_DUAL_LATENCY 336
+/* enable/disable dual latency path */
+#define SET_ADSL_DUAL_LATENCY 337
+
+/* Enable/Disable autoboot mode. */
+/* When the autoboot mode is disabled, the driver will excute some cmv
+ commands for led control and dual latency when DSL startup.*/
+#define AUTOBOOT_ENABLE_SET 338
+
+/* Enable/Disable Quiet Mode*/
+/* Quiet mode is used for firmware debug. if the quiet mode enable, the autoboot daemon will not reset arc when the arc need to reboot */
+#define QUIET_MODE_GET 339
+#define QUIET_MODE_SET 340
+
+/* Enable/Disable showtime lock*/
+/* showtime lock is used for firmware debug. if the showtime lock enable, the autoboot daemon will not reset arc when the arc reach showtime and need to reboot */
+#define SHOWTIME_LOCK_GET 341
+#define SHOWTIME_LOCK_SET 342
+
+#define L0_POWER_MODE 0
+#define L2_POWER_MODE 2
+#define L3_POWER_MODE 3
+
+#define DUAL_LATENCY_US_DS_DISABLE 0
+#define DUAL_LATENCY_US_ENABLE (1<<0)
+#define DUAL_LATENCY_DS_ENABLE (1<<1)
+#define DUAL_LATENCY_US_DS_ENABLE (DUAL_LATENCY_US_ENABLE|DUAL_LATENCY_DS_ENABLE)
+
+#define ME_HDLC_IDLE 0
+#define ME_HDLC_INVALID_MSG 1
+#define ME_HDLC_MSG_QUEUED 2
+#define ME_HDLC_MSG_SENT 3
+#define ME_HDLC_RESP_RCVD 4
+#define ME_HDLC_RESP_TIMEOUT 5
+#define ME_HDLC_RX_BUF_OVERFLOW 6
+#define ME_HDLC_UNRESOLVED 1
+#define ME_HDLC_RESOLVED 2
+
+/*** Enums ***/
+typedef enum mei_error {
+ MEI_SUCCESS = 0,
+ MEI_FAILURE = -1,
+ MEI_MAILBOX_FULL = -2,
+ MEI_MAILBOX_EMPTY = -3,
+ MEI_MAILBOX_TIMEOUT = -4,
+} MEI_ERROR;
+
+#endif
--- /dev/null
+/******************************************************************************
+**
+** FILE NAME : ifxmips_mei_app_ioctl.h
+** PROJECT : Danube
+** MODULES : MEI
+**
+** DATE : 1 Jan 2006
+** AUTHOR : TC Chen
+** DESCRIPTION : MEI Driver
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Version $Date $Author $Comment
+*******************************************************************************/
+#ifndef __IFXMIPS_MEI_APP_IOCTL_H
+#define __IFXMIPS_MEI_APP_IOCTL_H
+
+#ifdef __KERNEL__
+#include "ifxmips_mei_ioctl.h"
+#endif
+
+/* Interface Name */
+//#define INTERFACE_NAME <define the interface>
+
+/* adslLineTable constants */
+#define GET_ADSL_LINE_CODE 1
+
+/* adslAtucPhysTable constants */
+#define GET_ADSL_ATUC_PHY 4
+
+/* adslAturPhysTable constants */
+#define GET_ADSL_ATUR_PHY 10
+
+/* adslAtucChanTable constants */
+#define GET_ADSL_ATUC_CHAN_INFO 15
+
+/* adslAturChanTable constants */
+#define GET_ADSL_ATUR_CHAN_INFO 18
+
+/* adslAtucPerfDataTable constants */
+#define GET_ADSL_ATUC_PERF_DATA 21
+
+/* adslAturPerfDataTable constants */
+#define GET_ADSL_ATUR_PERF_DATA 40
+
+/* adslAtucIntervalTable constants */
+#define GET_ADSL_ATUC_INTVL_INFO 60
+
+/* adslAturIntervalTable constants */
+#define GET_ADSL_ATUR_INTVL_INFO 65
+
+/* adslAtucChanPerfDataTable constants */
+#define GET_ADSL_ATUC_CHAN_PERF_DATA 70
+
+/* adslAturChanPerfDataTable constants */
+#define GET_ADSL_ATUR_CHAN_PERF_DATA 90
+
+/* adslAtucChanIntervalTable constants */
+#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110
+
+/* adslAturChanIntervalTable constants */
+#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115
+
+/* adslLineAlarmConfProfileTable constants */
+#define GET_ADSL_ALRM_CONF_PROF 120
+#define SET_ADSL_ALRM_CONF_PROF 121
+
+/* adslAturTrap constants */
+#define ADSL_ATUR_TRAPS 135
+
+////////////////// RFC-3440 //////////////
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+/* adslLineExtTable */
+#define GET_ADSL_ATUC_LINE_EXT 201
+#define SET_ADSL_ATUC_LINE_EXT 203
+
+/* adslAtucPerfDateExtTable */
+#define GET_ADSL_ATUC_PERF_DATA_EXT 205
+
+/* adslAtucIntervalExtTable */
+#define GET_ADSL_ATUC_INTVL_EXT_INFO 221
+
+/* adslAturPerfDataExtTable */
+#define GET_ADSL_ATUR_PERF_DATA_EXT 225
+
+/* adslAturIntervalExtTable */
+#define GET_ADSL_ATUR_INTVL_EXT_INFO 233
+
+/* adslAlarmConfProfileExtTable */
+#define GET_ADSL_ALRM_CONF_PROF_EXT 235
+#define SET_ADSL_ALRM_CONF_PROF_EXT 236
+
+/* adslAturExtTrap */
+#define ADSL_ATUR_EXT_TRAPS 240
+
+#endif
+
+/* The following constants are added to support the WEB related ADSL Statistics */
+
+/* adslLineStatus constants */
+#define GET_ADSL_LINE_STATUS 245
+
+/* adslLineRate constants */
+#define GET_ADSL_LINE_RATE 250
+
+/* adslLineInformation constants */
+#define GET_ADSL_LINE_INFO 255
+
+/* adslNearEndPerformanceStats constants */
+#define GET_ADSL_NEAREND_STATS 270
+
+/* adslFarEndPerformanceStats constants */
+#define GET_ADSL_FAREND_STATS 290
+
+/* Sub-carrier related parameters */
+#define GET_ADSL_LINE_INIT_STATS 150
+#define GET_ADSL_POWER_SPECTRAL_DENSITY 151
+
+#define IFXMIPS_MIB_LO_ATUC 295
+#define IFXMIPS_MIB_LO_ATUR 296
+
+#define GET_ADSL_ATUC_SUBCARRIER_STATS 297
+#define GET_ADSL_ATUR_SUBCARRIER_STATS 298
+
+
+
+///////////////////////////////////////////////////////////
+// makeCMV(Opcode, Group, Address, Index, Size, Data)
+
+/* adslLineCode Flags */
+#define LINE_CODE_FLAG 0x1 /* BIT 0th position */
+
+/* adslAtucPhysTable Flags */
+#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */
+#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data,TxMessage)
+#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data,TxMessage)
+
+#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */
+#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data,TxMessage)
+
+#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */
+#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data,TxMessage)
+
+#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */
+
+#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */
+#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data,TxMessage)
+
+#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */
+#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data,TxMessage)
+
+
+/* adslAturPhysTable Flags */
+#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */
+#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data,TxMessage)
+#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data,TxMessage)
+
+#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */
+#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data,TxMessage)
+
+#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */
+#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data,TxMessage)
+
+#define ATUR_SNRMGN_FLAG 0x8
+#if 0 /* [ Ritesh. Use PLAM 45 0 for 0.1dB resolution rather than INFO 68 3 */
+#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data,TxMessage)
+#else
+#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, PLAM_SNRMargin_0_1db, 0, 1, data, TxMessage)
+#endif
+
+#define ATUR_ATTN_FLAG 0x10
+#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data,TxMessage)
+
+#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */
+
+#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */
+#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data,TxMessage)
+
+#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */
+#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data,TxMessage)
+
+/* adslAtucChanTable Flags */
+#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */
+//KD #define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data,TxMessage)
+#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 92, 1, 1, data,TxMessage)
+
+#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */
+#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data,TxMessage)
+
+#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */
+
+/* adslAturChanTable Flags */
+#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */
+//KD #define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data,TxMessage)
+#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 93, 1, 1, data,TxMessage)
+
+#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */
+#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data,TxMessage)
+
+#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */
+
+#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */
+
+/* adslAtucPerfDataTable Flags */
+#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */
+#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */
+#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data,TxMessage)
+#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */
+#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data,TxMessage)
+#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */
+#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */
+#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */
+#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */
+#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */
+#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */
+#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */
+#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */
+#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */
+#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */
+#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */
+#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */
+#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */
+#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */
+#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */
+
+/* adslAturPerfDataTable Flags */
+#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */
+#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */
+#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */
+#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data,TxMessage)
+#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */
+#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data,TxMessage)
+#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */
+#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */
+#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */
+#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */
+#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */
+#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */
+#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */
+#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */
+#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */
+#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */
+#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */
+#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */
+#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */
+#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */
+
+/* adslAtucIntervalTable Flags */
+#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */
+#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */
+#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */
+#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */
+#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */
+
+/* adslAturIntervalTable Flags */
+#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */
+#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */
+#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */
+#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */
+#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */
+
+/* adslAtucChanPerfDataTable Flags */
+#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */
+#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */
+#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */
+#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
+#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
+#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
+#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */
+#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
+#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
+#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
+#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/
+#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
+#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
+#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
+#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
+#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
+#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */
+#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
+#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
+
+
+/* adslAturChanPerfDataTable Flags */
+#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */
+#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
+#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
+#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */
+#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
+#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
+#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */
+#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data,TxMessage)
+#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data,TxMessage)
+#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
+#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data,TxMessage)
+#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data,TxMessage)
+#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
+#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
+#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */
+#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
+#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
+#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
+#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
+#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
+#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
+#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
+#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
+#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */
+#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
+#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
+
+/* adslAtucChanIntervalTable Flags */
+#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */
+#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */
+#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */
+#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */
+#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */
+#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */
+
+/* adslAturChanIntervalTable Flags */
+#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */
+#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */
+#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */
+#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */
+#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */
+#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */
+
+/* adslLineAlarmConfProfileTable Flags */
+#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */
+#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */
+#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */
+#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */
+#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */
+#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */
+#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */
+#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */
+#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */
+#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */
+#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */
+#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */
+#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */
+#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */
+#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */
+#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */
+#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */
+
+
+/* adslAturTraps Flags */
+#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */
+#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */
+#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */
+#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */
+#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */
+#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */
+#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */
+#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */
+#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */
+
+//RFC- 3440 FLAG DEFINITIONS
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+/* adslLineExtTable flags */
+#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */
+#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
+#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */
+#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
+#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data,TxMessage)
+#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */
+#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data,TxMessage)
+#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */
+#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data,TxMessage)
+
+/* adslAtucPerfDataExtTable flags */
+#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */
+#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
+#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */
+#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
+#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */
+#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
+#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */
+#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
+#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */
+#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */
+#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */
+#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */
+#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */
+#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */
+#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */
+#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */
+#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */
+#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */
+#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */
+#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */
+
+/* adslAturPerfDataExtTable */
+#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */
+#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)
+#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */
+#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
+#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */
+#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */
+#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */
+#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */
+#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */
+#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */
+
+/* adslAutcIntervalExtTable flags */
+#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */
+#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */
+#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */
+#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */
+
+/* adslAturIntervalExtTable */
+#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */
+#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */
+
+/* adslAlarmConfProfileExtTable */
+#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */
+#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */
+#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */
+#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */
+#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */
+
+/* adslAturExtTraps */
+#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */
+#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */
+#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */
+#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */
+#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */
+
+#endif
+
+/* adslLineStatus Flags */
+#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */
+#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
+#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */
+#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data, TxMessage)
+#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */
+#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data, TxMessage)
+#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */
+#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data, TxMessage)
+
+/* adslLineRate Flags */
+#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data, TxMessage)
+
+
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data, TxMessage)
+
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data, TxMessage)
+
+#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data, TxMessage)
+
+
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data, TxMessage)
+
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data, TxMessage)
+
+#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */
+#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data, TxMessage)
+
+#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */
+#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data, TxMessage)
+
+/* adslLineInformation Flags */
+#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */
+#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data, TxMessage)
+#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data, TxMessage)
+#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */
+#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data, TxMessage)
+#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data, TxMessage)
+#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */
+#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data, TxMessage)
+#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */
+#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data, TxMessage)
+#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */
+#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data, TxMessage)
+#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */
+#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data, TxMessage)
+#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */
+#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data, TxMessage)
+#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data, TxMessage)
+#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data, TxMessage)
+#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */
+#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data, TxMessage)
+#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */
+#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data, TxMessage)
+#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */
+#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data, TxMessage)
+
+/* adslNearEndPerformanceStats Flags */
+#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data, TxMessage)
+#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data, TxMessage)
+#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */
+#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data, TxMessage)
+#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */
+#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */
+#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */
+#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */
+#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */
+#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */
+#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data, TxMessage)
+#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data, TxMessage)
+#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data, TxMessage)
+#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data, TxMessage)
+#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */
+#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data, TxMessage)
+#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */
+#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data, TxMessage)
+#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */
+#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
+#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */
+#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data, TxMessage)
+#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */
+#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
+#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */
+#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data, TxMessage)
+#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data, TxMessage)
+#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */
+
+/* adslFarEndPerformanceStats Flags */
+#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data, TxMessage)
+#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */
+#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */
+#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */
+#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */
+#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */
+#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data, TxMessage)
+#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data, TxMessage)
+#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */
+#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data, TxMessage)
+#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data, TxMessage)
+#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */
+#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data, TxMessage)
+#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */
+#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data, TxMessage)
+#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */
+#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)
+#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */
+#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data, TxMessage)
+#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */
+#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
+#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */
+#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data, TxMessage)
+#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data, TxMessage)
+#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */
+// 603221:tc.chen end
+/* TR-69 related additional parameters - defines */
+/* Defines for struct adslATURSubcarrierInfo */
+#define NEAREND_HLINSC 0x1
+#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data, TxMessage)
+#define NEAREND_HLINPS 0x2
+#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data, TxMessage)
+#define NEAREND_HLOGMT 0x4
+#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data, TxMessage)
+#define NEAREND_HLOGPS 0x8
+#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data, TxMessage)
+#define NEAREND_QLNMT 0x10
+#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data, TxMessage)
+#define NEAREND_QLNPS 0x20
+#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data, TxMessage)
+#define NEAREND_SNRMT 0x40
+#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data, TxMessage)
+#define NEAREND_SNRPS 0x80
+#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data, TxMessage)
+#define NEAREND_BITPS 0x100
+#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data, TxMessage)
+#define NEAREND_GAINPS 0x200
+#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data, TxMessage)
+
+/* Defines for struct adslATUCSubcarrierInfo */
+#define FAREND_HLINSC 0x1
+
+/* As per the feedback from Knut on 21/08/2006, the cmv command of HLINSC should be INFO 70 2 */
+#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 2, 1, data, TxMessage)
+#define FAREND_HLINPS 0x2
+#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data, TxMessage)
+#define FAREND_HLOGMT 0x4
+#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data, TxMessage)
+#define FAREND_HLOGPS 0x8
+#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data, TxMessage)
+#define FAREND_QLNMT 0x10
+#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data, TxMessage)
+#define FAREND_QLNPS 0x20
+#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data, TxMessage)
+#define FAREND_SNRMT 0x40
+#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data, TxMessage)
+#define FAREND_SNRPS 0x80
+#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 11, idx, size, data, TxMessage)
+#define FAREND_SNRPS_DIAG_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data, TxMessage)
+#define FAREND_BITPS 0x100
+#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data, TxMessage)
+#define FAREND_GAINPS 0x200
+#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data, TxMessage)
+
+
+// GET_ADSL_POWER_SPECTRAL_DENSITY
+#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data, TxMessage)
+#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data, TxMessage)
+#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data, TxMessage)
+#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data, TxMessage)
+#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data, TxMessage)
+#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data, TxMessage)
+
+/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing
+
+#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val))
+// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer
+
+#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0)
+// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer
+
+
+#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit))
+// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer
+
+
+////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION
+
+//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type.
+ //
+#define u32 unsigned int
+#define u16 unsigned short
+#define s16 short
+#define u8 unsigned char
+
+
+typedef u32 AdslPerfTimeElapsed;
+typedef u32 AdslPerfPrevDayCount;
+typedef u32 PerfCurrentCount;
+typedef u32 PerfIntervalCount;
+typedef u32 AdslPerfCurrDayCount;
+
+
+//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry)
+
+typedef struct adslLineTableEntry {
+ int ifIndex;
+ int adslLineCode;
+ u8 flags;
+} adslLineTableEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslLineExtTableEntry {
+ int ifIndex;
+ u16 adslLineTransAtucCap;
+ u16 adslLineTransAtucConfig;
+ u16 adslLineTransAtucActual;
+ int adslLineGlitePowerState;
+ u32 flags;
+}adslLineExtTableEntry;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry)
+#ifndef u_char
+#define u_char u8
+#endif
+
+typedef struct adslVendorId {
+ u16 country_code;
+ u_char provider_id[4]; /* Ascii characters */
+ u_char revision_info[2];
+}adslVendorId;
+
+typedef struct adslAtucPhysEntry {
+ int ifIndex;
+ char serial_no[32];
+ union {
+ char vendor_id[16];
+ adslVendorId vendor_info;
+ } vendor_id;
+ char version_no[16];
+ u32 status;
+ int outputPwr;
+ u32 attainableRate;
+ u8 flags;
+} adslAtucPhysEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry)
+
+typedef struct adslAturPhysEntry {
+ int ifIndex;
+ char serial_no[32];
+ union {
+ char vendor_id[16];
+ adslVendorId vendor_info;
+ } vendor_id;
+ char version_no[16];
+ int SnrMgn;
+ u32 Attn;
+ u32 status;
+ int outputPwr;
+ u32 attainableRate;
+ u8 flags;
+} adslAturPhysEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo)
+
+typedef struct adslAtucChanInfo {
+ int ifIndex;
+ u32 interleaveDelay;
+ u32 currTxRate;
+ u32 prevTxRate;
+ u8 flags;
+} adslAtucChanInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo)
+
+typedef struct adslAturChanInfo {
+ int ifIndex;
+ u32 interleaveDelay;
+ u32 currTxRate;
+ u32 prevTxRate;
+ u32 crcBlkLen;
+ u8 flags;
+} adslAturChanInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry)
+
+typedef struct atucPerfDataEntry
+{
+ int ifIndex;
+ u32 adslAtucPerfLofs;
+ u32 adslAtucPerfLoss;
+ u32 adslAtucPerfESs;
+ u32 adslAtucPerfInits;
+ int adslAtucPerfValidIntervals;
+ int adslAtucPerfInvalidIntervals;
+ AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed;
+ PerfCurrentCount adslAtucPerfCurr15MinLofs;
+ PerfCurrentCount adslAtucPerfCurr15MinLoss;
+ PerfCurrentCount adslAtucPerfCurr15MinESs;
+ PerfCurrentCount adslAtucPerfCurr15MinInits;
+ AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed;
+ AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs;
+ AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss;
+ AdslPerfCurrDayCount adslAtucPerfCurr1DayESs;
+ AdslPerfCurrDayCount adslAtucPerfCurr1DayInits;
+ int adslAtucPerfPrev1DayMoniSecs;
+ AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs;
+ AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss;
+ AdslPerfPrevDayCount adslAtucPerfPrev1DayESs;
+ AdslPerfPrevDayCount adslAtucPerfPrev1DayInits;
+ u32 flags;
+} atucPerfDataEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct atucPerfDataExtEntry
+ {
+ int ifIndex;
+ u32 adslAtucPerfStatFastR;
+ u32 adslAtucPerfStatFailedFastR;
+ u32 adslAtucPerfStatSesL;
+ u32 adslAtucPerfStatUasL;
+ u32 adslAtucPerfCurr15MinFastR;
+ u32 adslAtucPerfCurr15MinFailedFastR;
+ u32 adslAtucPerfCurr15MinSesL;
+ u32 adslAtucPerfCurr15MinUasL;
+ u32 adslAtucPerfCurr1DayFastR;
+ u32 adslAtucPerfCurr1DayFailedFastR;
+ u32 adslAtucPerfCurr1DaySesL;
+ u32 adslAtucPerfCurr1DayUasL;
+ u32 adslAtucPerfPrev1DayFastR;
+ u32 adslAtucPerfPrev1DayFailedFastR;
+ u32 adslAtucPerfPrev1DaySesL;
+ u32 adslAtucPerfPrev1DayUasL;
+ u32 flags;
+} atucPerfDataExtEntry;
+
+#endif
+//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry)
+
+typedef struct aturPerfDataEntry
+{
+ int ifIndex;
+ u32 adslAturPerfLofs;
+ u32 adslAturPerfLoss;
+ u32 adslAturPerfLprs;
+ u32 adslAturPerfESs;
+ int adslAturPerfValidIntervals;
+ int adslAturPerfInvalidIntervals;
+ AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed;
+ PerfCurrentCount adslAturPerfCurr15MinLofs;
+ PerfCurrentCount adslAturPerfCurr15MinLoss;
+ PerfCurrentCount adslAturPerfCurr15MinLprs;
+ PerfCurrentCount adslAturPerfCurr15MinESs;
+ AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed;
+ AdslPerfCurrDayCount adslAturPerfCurr1DayLofs;
+ AdslPerfCurrDayCount adslAturPerfCurr1DayLoss;
+ AdslPerfCurrDayCount adslAturPerfCurr1DayLprs;
+ AdslPerfCurrDayCount adslAturPerfCurr1DayESs;
+ int adslAturPerfPrev1DayMoniSecs;
+ AdslPerfPrevDayCount adslAturPerfPrev1DayLofs;
+ AdslPerfPrevDayCount adslAturPerfPrev1DayLoss;
+ AdslPerfPrevDayCount adslAturPerfPrev1DayLprs;
+ AdslPerfPrevDayCount adslAturPerfPrev1DayESs;
+ u32 flags;
+} aturPerfDataEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct aturPerfDataExtEntry
+ {
+ int ifIndex;
+ u32 adslAturPerfStatSesL;
+ u32 adslAturPerfStatUasL;
+ u32 adslAturPerfCurr15MinSesL;
+ u32 adslAturPerfCurr15MinUasL;
+ u32 adslAturPerfCurr1DaySesL;
+ u32 adslAturPerfCurr1DayUasL;
+ u32 adslAturPerfPrev1DaySesL;
+ u32 adslAturPerfPrev1DayUasL;
+ u32 flags;
+} aturPerfDataExtEntry;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo)
+
+typedef struct adslAtucIntvlInfo {
+ int ifIndex;
+ int IntervalNumber;
+ PerfIntervalCount intervalLOF;
+ PerfIntervalCount intervalLOS;
+ PerfIntervalCount intervalES;
+ PerfIntervalCount intervalInits;
+ int intervalValidData;
+ u8 flags;
+} adslAtucIntvlInfo;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslAtucInvtlExtInfo
+ {
+ int ifIndex;
+ int IntervalNumber;
+ u32 adslAtucIntervalFastR;
+ u32 adslAtucIntervalFailedFastR;
+ u32 adslAtucIntervalSesL;
+ u32 adslAtucIntervalUasL;
+ u32 flags;
+} adslAtucInvtlExtInfo;
+#endif
+//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo)
+
+typedef struct adslAturIntvlInfo {
+ int ifIndex;
+ int IntervalNumber;
+ PerfIntervalCount intervalLOF;
+ PerfIntervalCount intervalLOS;
+ PerfIntervalCount intervalLPR;
+ PerfIntervalCount intervalES;
+ int intervalValidData;
+ u8 flags;
+} adslAturIntvlInfo;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslAturInvtlExtInfo
+ {
+ int ifIndex;
+ int IntervalNumber;
+ u32 adslAturIntervalSesL;
+ u32 adslAturIntervalUasL;
+ u32 flags;
+} adslAturInvtlExtInfo;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry)
+
+typedef struct atucChannelPerfDataEntry
+{
+ int ifIndex;
+ u32 adslAtucChanReceivedBlks;
+ u32 adslAtucChanTransmittedBlks;
+ u32 adslAtucChanCorrectedBlks;
+ u32 adslAtucChanUncorrectBlks;
+ int adslAtucChanPerfValidIntervals;
+ int adslAtucChanPerfInvalidIntervals;
+ AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed;
+ PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks;
+ PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks;
+ PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks;
+ PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks;
+ AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed;
+ AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks;
+ AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks;
+ AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks;
+ AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks;
+ int adslAtucChanPerfPrev1DayMoniSecs;
+ AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks;
+ AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks;
+ AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks;
+ AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks;
+ u32 flags;
+}atucChannelPerfDataEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry)
+
+typedef struct aturChannelPerfDataEntry
+{
+ int ifIndex;
+ u32 adslAturChanReceivedBlks;
+ u32 adslAturChanTransmittedBlks;
+ u32 adslAturChanCorrectedBlks;
+ u32 adslAturChanUncorrectBlks;
+ int adslAturChanPerfValidIntervals;
+ int adslAturChanPerfInvalidIntervals;
+ AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed;
+ PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks;
+ PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks;
+ PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks;
+ PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks;
+ AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed;
+ AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks;
+ AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks;
+ AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks;
+ AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks;
+ int adslAturChanPerfPrev1DayMoniSecs;
+ AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks;
+ AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks;
+ AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks;
+ AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks;
+ u32 flags;
+} aturChannelPerfDataEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo)
+
+typedef struct adslAtucChanIntvlInfo {
+ int ifIndex;
+ int IntervalNumber;
+ PerfIntervalCount chanIntervalRecvdBlks;
+ PerfIntervalCount chanIntervalXmitBlks;
+ PerfIntervalCount chanIntervalCorrectedBlks;
+ PerfIntervalCount chanIntervalUncorrectBlks;
+ int intervalValidData;
+ u8 flags;
+} adslAtucChanIntvlInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo)
+
+typedef struct adslAturChanIntvlInfo {
+ int ifIndex;
+ int IntervalNumber;
+ PerfIntervalCount chanIntervalRecvdBlks;
+ PerfIntervalCount chanIntervalXmitBlks;
+ PerfIntervalCount chanIntervalCorrectedBlks;
+ PerfIntervalCount chanIntervalUncorrectBlks;
+ int intervalValidData;
+ u8 flags;
+} adslAturChanIntvlInfo;
+
+
+//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry)
+//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry)
+
+typedef struct adslLineAlarmConfProfileEntry
+ {
+ unsigned char adslLineAlarmConfProfileName[32];
+ int adslAtucThresh15MinLofs;
+ int adslAtucThresh15MinLoss;
+ int adslAtucThresh15MinESs;
+ u32 adslAtucThreshFastRateUp;
+ u32 adslAtucThreshInterleaveRateUp;
+ u32 adslAtucThreshFastRateDown;
+ u32 adslAtucThreshInterleaveRateDown;
+ int adslAtucInitFailureTrapEnable;
+ int adslAturThresh15MinLofs;
+ int adslAturThresh15MinLoss;
+ int adslAturThresh15MinLprs;
+ int adslAturThresh15MinESs;
+ u32 adslAturThreshFastRateUp;
+ u32 adslAturThreshInterleaveRateUp;
+ u32 adslAturThreshFastRateDown;
+ u32 adslAturThreshInterleaveRateDown;
+ int adslLineAlarmConfProfileRowStatus;
+ u32 flags;
+} adslLineAlarmConfProfileEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslLineAlarmConfProfileExtEntry
+ {
+ u8 adslLineAlarmConfProfileExtName[32];
+ u32 adslAtucThreshold15MinFailedFastR;
+ u32 adslAtucThreshold15MinSesL;
+ u32 adslAtucThreshold15MinUasL;
+ u32 adslAturThreshold15MinSesL;
+ u32 adslAturThreshold15MinUasL;
+ u32 flags;
+} adslLineAlarmConfProfileExtEntry;
+#endif
+//TRAPS
+
+/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */
+typedef struct adslLineStatus
+ {
+ int adslModemStatus;
+ u32 adslModeSelected;
+ int adslAtucThresh15MinESs;
+ int adslTrellisCodeEnable;
+ int adslLatency;
+ u8 flags;
+ } adslLineStatusInfo;
+
+typedef struct adslLineRate
+ {
+ u32 adslDataRateds;
+ u32 adslDataRateus;
+ u32 adslATTNDRds;
+ u32 adslATTNDRus;
+ u8 flags;
+ } adslLineRateInfo;
+
+typedef struct adslLineInfo
+ {
+ u32 adslInterleaveDepthds;
+ u32 adslInterleaveDepthus;
+ u32 adslLATNds;
+ u32 adslLATNus;
+ u32 adslSATNds;
+ u32 adslSATNus;
+ int adslSNRMds;
+ int adslSNRMus;
+ int adslACATPds;
+ int adslACATPus;
+ u32 flags;
+ } adslLineInfo;
+
+typedef struct adslNearEndPerfStats
+ {
+ u32 adslSuperFrames;
+ u32 adslneLOS;
+ u32 adslneLOF;
+ u32 adslneLPR;
+ u32 adslneNCD;
+ u32 adslneLCD;
+ u32 adslneCRC;
+ u32 adslneRSCorr;
+ u32 adslneFECS;
+ u32 adslneES;
+ u32 adslneSES;
+ u32 adslneLOSS;
+ u32 adslneUAS;
+ u32 adslneHECErrors;
+ u32 flags;
+ } adslNearEndPerfStats;
+
+typedef struct adslFarEndPerfStats
+ {
+ u32 adslfeLOS;
+ u32 adslfeLOF;
+ u32 adslfeLPR;
+ u32 adslfeNCD;
+ u32 adslfeLCD;
+ u32 adslfeCRC;
+ u32 adslfeRSCorr;
+ u32 adslfeFECS;
+ u32 adslfeES;
+ u32 adslfeSES;
+ u32 adslfeLOSS;
+ u32 adslfeUAS;
+ u32 adslfeHECErrors;
+ u32 flags;
+ } adslFarEndPerfStats;
+
+/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */
+typedef struct adslATURSubcarrierInfo {
+ int ifindex;
+ u16 HLINSCds;
+ u16 HLINpsds[1024];/* Even index = real part; Odd Index
+ = imaginary part for each tone */
+ u16 HLOGMTds;
+ u16 HLOGpsds[512];
+ u16 QLNMTds;
+ u16 QLNpsds[512];
+ u16 SNRMTds;
+ u16 SNRpsds[512];
+ u16 BITpsds[512];
+ s16 GAINpsds[512]; /* Signed value in 0.1dB units. i.e dB * 10.
+ Needs to be converted into linear scale*/
+ u16 flags;
+}adslATURSubcarrierInfo;
+
+typedef struct adslATUCSubcarrierInfo {
+ int ifindex;
+ u16 HLINSCus;
+ u16 HLINpsus[128];/* Even index = real part; Odd Index
+ = imaginary part for each tone */
+ u16 HLOGMTus;
+ u16 HLOGpsus[64];
+ u16 QLNMTus;
+ u16 QLNpsus[64];
+ u16 SNRMTus;
+ u16 SNRpsus[64];
+ u16 BITpsus[64];
+ s16 GAINpsus[64]; /* Signed value in 0.1dB units. i.e dB * 10.
+ Needs to be converted into linear scale*/
+ u16 flags;
+}adslATUCSubcarrierInfo;
+
+#ifndef u_int16
+#define u_int16 u16
+#endif
+
+typedef struct adslInitStats {
+ u_int16 FullInitializationCount;
+ u_int16 FailedFullInitializationCount;
+ u_int16 LINIT_Errors;
+ u_int16 Init_Timeouts;
+}adslInitStats;
+
+typedef struct adslPowerSpectralDensity {
+ int ACTPSDds;
+ int ACTPSDus;
+}adslPowerSpectralDensity;
+
+//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags)
+typedef union structpts {
+ adslLineTableEntry * adslLineTableEntry_pt;
+ adslAtucPhysEntry * adslAtucPhysEntry_pt;
+ adslAturPhysEntry * adslAturPhysEntry_pt;
+ adslAtucChanInfo * adslAtucChanInfo_pt;
+ adslAturChanInfo * adslAturChanInfo_pt;
+ atucPerfDataEntry * atucPerfDataEntry_pt;
+ aturPerfDataEntry * aturPerfDataEntry_pt;
+ adslAtucIntvlInfo * adslAtucIntvlInfo_pt;
+ adslAturIntvlInfo * adslAturIntvlInfo_pt;
+ atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt;
+ aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt;
+ adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt;
+ adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt;
+ adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt;
+ // RFC 3440
+
+ #ifdef IFXMIPS_MEI_MIB_RFC3440
+ adslLineExtTableEntry * adslLineExtTableEntry_pt;
+ atucPerfDataExtEntry * atucPerfDataExtEntry_pt;
+ adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt;
+ aturPerfDataExtEntry * aturPerfDataExtEntry_pt;
+ adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt;
+ adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt;
+ #endif
+ adslLineStatusInfo * adslLineStatusInfo_pt;
+ adslLineRateInfo * adslLineRateInfo_pt;
+ adslLineInfo * adslLineInfo_pt;
+ adslNearEndPerfStats * adslNearEndPerfStats_pt;
+ adslFarEndPerfStats * adslFarEndPerfStats_pt;
+ adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt;
+ adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt;
+ adslPowerSpectralDensity * adslPowerSpectralDensity_pt;
+}structpts;
+
+#endif /* ] __IFXMIPS_MEI_APP_IOCTL_H */
--- /dev/null
+/******************************************************************************
+**
+** FILE NAME : ifxmips_mei_bsp.h
+** PROJECT : Danube
+** MODULES : MEI
+**
+** DATE : 1 Jan 2006
+** AUTHOR : TC Chen
+** DESCRIPTION : MEI Driver
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Version $Date $Author $Comment
+*******************************************************************************/
+#ifndef _IFXMIPS_MEI_BSP_H_
+#define _IFXMIPS_MEI_BSP_H_
+
+/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/
+#define MEI_DATA_XFR_OFFSET (0x0000)
+#define MEI_VERSION_OFFSET (0x0004)
+#define MEI_ARC_GP_STAT_OFFSET (0x0008)
+#define MEI_DATA_XFR_STAT_OFFSET (0x000C)
+#define MEI_XFR_ADDR_OFFSET (0x0010)
+#define MEI_MAX_WAIT_OFFSET (0x0014)
+#define MEI_TO_ARC_INT_OFFSET (0x0018)
+#define ARC_TO_MEI_INT_OFFSET (0x001C)
+#define ARC_TO_MEI_INT_MASK_OFFSET (0x0020)
+#define MEI_DEBUG_WAD_OFFSET (0x0024)
+#define MEI_DEBUG_RAD_OFFSET (0x0028)
+#define MEI_DEBUG_DATA_OFFSET (0x002C)
+#define MEI_DEBUG_DEC_OFFSET (0x0030)
+#define MEI_CONFIG_OFFSET (0x0034)
+#define MEI_RST_CONTROL_OFFSET (0x0038)
+#define MEI_DBG_MASTER_OFFSET (0x003C)
+#define MEI_CLK_CONTROL_OFFSET (0x0040)
+#define MEI_BIST_CONTROL_OFFSET (0x0044)
+#define MEI_BIST_STAT_OFFSET (0x0048)
+#define MEI_XDATA_BASE_SH_OFFSET (0x004c)
+#define MEI_XDATA_BASE_OFFSET (0x0050)
+#define MEI_XMEM_BAR_BASE_OFFSET (0x0054)
+#define MEI_XMEM_BAR0_OFFSET (0x0054)
+#define MEI_XMEM_BAR1_OFFSET (0x0058)
+#define MEI_XMEM_BAR2_OFFSET (0x005C)
+#define MEI_XMEM_BAR3_OFFSET (0x0060)
+#define MEI_XMEM_BAR4_OFFSET (0x0064)
+#define MEI_XMEM_BAR5_OFFSET (0x0068)
+#define MEI_XMEM_BAR6_OFFSET (0x006C))
+#define MEI_XMEM_BAR7_OFFSET (0x0070)
+#define MEI_XMEM_BAR8_OFFSET (0x0074)
+#define MEI_XMEM_BAR9_OFFSET (0x0078)
+#define MEI_XMEM_BAR10_OFFSET (0x007C)
+#define MEI_XMEM_BAR11_OFFSET (0x0080)
+#define MEI_XMEM_BAR12_OFFSET (0x0084)
+#define MEI_XMEM_BAR13_OFFSET (0x0088)
+#define MEI_XMEM_BAR14_OFFSET (0x008C)
+#define MEI_XMEM_BAR15_OFFSET (0x0090)
+#define MEI_XMEM_BAR16_OFFSET (0x0094)
+
+#define WHILE_DELAY 20000
+/*
+** Define where in ME Processor's memory map the Stratify chip lives
+*/
+
+#define MAXSWAPSIZE 8 * 1024 //8k *(32bits)
+
+// Mailboxes
+#define MSG_LENGTH 16 // x16 bits
+#define YES_REPLY 1
+#define NO_REPLY 0
+
+#define CMV_TIMEOUT 1000 //jiffies
+
+// Block size per BAR
+#define SDRAM_SEGMENT_SIZE (64*1024)
+// Number of Bar registers
+#define MAX_BAR_REGISTERS (17)
+
+#define XDATA_REGISTER (15)
+
+#define IFXMIPS_MEI_IOCTL_CMV_WINHOST IFX_ADSL_IOC_CMV_WINHOST
+
+#define IFXMIPS_MEI_IOCTL_CMV_READ IFX_ADSL_IOC_CMV_READ
+#define IFXMIPS_MEI_IOCTL_CMV_WRITE IFX_ADSL_IOC_CMV_WRITE
+
+#define IFXMIPS_MEI_IOCTL_GET_BASE_ADDRESS IFX_ADSL_IOC_GET_BASE_ADDRESS
+
+// ARC register addresss
+#define ARC_STATUS 0x0
+#define ARC_LP_START 0x2
+#define ARC_LP_END 0x3
+#define ARC_DEBUG 0x5
+#define ARC_INT_MASK 0x10A
+
+#define IRAM0_BASE (0x00000)
+#define IRAM1_BASE (0x04000)
+#define BRAM_BASE (0x0A000)
+
+#define ADSL_BASE (0x20000)
+#define CRI_BASE (ADSL_BASE + 0x11F00)
+#define CRI_CCR0 (CRI_BASE + 0x00)
+#define CRI_RST (CRI_BASE + 0x04*4)
+#define ADSL_DILV_BASE (ADSL_BASE+0x20000)
+
+//
+#define IRAM0_ADDR_BIT_MASK 0xFFF
+#define IRAM1_ADDR_BIT_MASK 0xFFF
+#define BRAM_ADDR_BIT_MASK 0xFFF
+#define RX_DILV_ADDR_BIT_MASK 0x1FFF
+
+/*** Bit definitions ***/
+
+#define FALSE 0
+#define TRUE 1
+#define BIT0 1<<0
+#define BIT1 1<<1
+#define BIT2 1<<2
+#define BIT3 1<<3
+#define BIT4 1<<4
+#define BIT5 1<<5
+#define BIT6 1<<6
+#define BIT7 1<<7
+#define BIT8 1<<8
+#define BIT9 1<<9
+#define BIT10 1<<10
+#define BIT11 1<<11
+#define BIT12 1<<12
+#define BIT13 1<<13
+#define BIT14 1<<14
+#define BIT15 1<<15
+#define BIT16 1<<16
+#define BIT17 1<<17
+#define BIT18 1<<18
+#define BIT19 1<<19
+#define BIT20 1<<20
+#define BIT21 1<<21
+#define BIT22 1<<22
+#define BIT23 1<<23
+#define BIT24 1<<24
+#define BIT25 1<<25
+#define BIT26 1<<26
+#define BIT27 1<<27
+#define BIT28 1<<28
+#define BIT29 1<<29
+#define BIT30 1<<30
+#define BIT31 1<<31
+
+// CRI_CCR0 Register definitions
+#define CLK_2M_MODE_ENABLE BIT6
+#define ACL_CLK_MODE_ENABLE BIT4
+#define FDF_CLK_MODE_ENABLE BIT2
+#define STM_CLK_MODE_ENABLE BIT0
+
+// CRI_RST Register definitions
+#define FDF_SRST BIT3
+#define MTE_SRST BIT2
+#define FCI_SRST BIT1
+#define AAI_SRST BIT0
+
+// MEI_TO_ARC_INTERRUPT Register definitions
+#define MEI_TO_ARC_INT1 BIT3
+#define MEI_TO_ARC_INT0 BIT2
+#define MEI_TO_ARC_CS_DONE BIT1 //need to check
+#define MEI_TO_ARC_MSGAV BIT0
+
+// ARC_TO_MEI_INTERRUPT Register definitions
+#define ARC_TO_MEI_INT1 BIT8
+#define ARC_TO_MEI_INT0 BIT7
+#define ARC_TO_MEI_CS_REQ BIT6
+#define ARC_TO_MEI_DBG_DONE BIT5
+#define ARC_TO_MEI_MSGACK BIT4
+#define ARC_TO_MEI_NO_ACCESS BIT3
+#define ARC_TO_MEI_CHECK_AAITX BIT2
+#define ARC_TO_MEI_CHECK_AAIRX BIT1
+#define ARC_TO_MEI_MSGAV BIT0
+
+// ARC_TO_MEI_INTERRUPT_MASK Register definitions
+#define GP_INT1_EN BIT8
+#define GP_INT0_EN BIT7
+#define CS_REQ_EN BIT6
+#define DBG_DONE_EN BIT5
+#define MSGACK_EN BIT4
+#define NO_ACC_EN BIT3
+#define AAITX_EN BIT2
+#define AAIRX_EN BIT1
+#define MSGAV_EN BIT0
+
+#define MEI_SOFT_RESET BIT0
+
+#define HOST_MSTR BIT0
+
+#define JTAG_MASTER_MODE 0x0
+#define MEI_MASTER_MODE HOST_MSTR
+
+// MEI_DEBUG_DECODE Register definitions
+#define MEI_DEBUG_DEC_MASK (0x3)
+#define MEI_DEBUG_DEC_AUX_MASK (0x0)
+#define MEI_DEBUG_DEC_DMP1_MASK (0x1)
+#define MEI_DEBUG_DEC_DMP2_MASK (0x2)
+#define MEI_DEBUG_DEC_CORE_MASK (0x3)
+
+#define AUX_STATUS (0x0)
+// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
+// page swap requests.
+#define MEI_TO_ARC_MAILBOX (0xDFD0)
+#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C)
+
+#define ARC_TO_MEI_MAILBOX (0xDFA0)
+#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C)
+
+// Codeswap request messages are indicated by setting BIT31
+#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000)
+
+// Clear Eoc messages received are indicated by setting BIT17
+#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000)
+
+/*
+** Swap page header
+*/
+// Page must be loaded at boot time if size field has BIT31 set
+#define BOOT_FLAG (BIT31)
+#define BOOT_FLAG_MASK ~BOOT_FLAG
+
+#define FREE_RELOAD 1
+#define FREE_SHOWTIME 2
+#define FREE_ALL 3
+
+// marcos
+#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
+#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr)))
+#define SET_BIT(reg, mask) reg |= (mask)
+#define CLEAR_BIT(reg, mask) reg &= (~mask)
+#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
+#define SET_BITS(reg, mask) SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
+
+#define ALIGN_SIZE ( 1L<<10 ) //1K size align
+#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
+
+// swap marco
+#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
+#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
+
+// Swap page header describes size in 32-bit words, load location, and image offset
+// for program and/or data segments
+typedef struct _arc_swp_page_hdr {
+ u32 p_offset; //Offset bytes of progseg from beginning of image
+ u32 p_dest; //Destination addr of progseg on processor
+ u32 p_size; //Size in 32-bitwords of program segment
+ u32 d_offset; //Offset bytes of dataseg from beginning of image
+ u32 d_dest; //Destination addr of dataseg on processor
+ u32 d_size; //Size in 32-bitwords of data segment
+} ARC_SWP_PAGE_HDR;
+
+/*
+** Swap image header
+*/
+#define GET_PROG 0 // Flag used for program mem segment
+#define GET_DATA 1 // Flag used for data mem segment
+
+// Image header contains size of image, checksum for image, and count of
+// page headers. Following that are 'count' page headers followed by
+// the code and/or data segments to be loaded
+typedef struct _arc_img_hdr {
+ u32 size; // Size of binary image in bytes
+ u32 checksum; // Checksum for image
+ u32 count; // Count of swp pages in image
+ ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy
+} ARC_IMG_HDR;
+
+typedef struct smmu_mem_info {
+ int type;
+ unsigned long nCopy;
+ unsigned long size;
+ unsigned char *address;
+ unsigned char *org_address;
+} smmu_mem_info_t;
+
+typedef struct ifxmips_mei_device_private {
+ int modem_ready;
+ int arcmsgav;
+ int cmv_reply;
+ int cmv_waiting;
+ // Mei to ARC CMV count, reply count, ARC Indicator count
+ int indicator_count;
+ int cmv_count;
+ int reply_count;
+ unsigned long image_size;
+ int nBar;
+ u16 Recent_indicator[MSG_LENGTH];
+
+ u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
+
+ smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
+ ARC_IMG_HDR *img_hdr;
+ // to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
+ wait_queue_head_t wait_queue_arcmsgav;
+ wait_queue_head_t wait_queue_modemready;
+ MEI_mutex_t mei_cmv_sema;
+} ifxmips_mei_device_private_t;
+
+#endif //_IFXMIPS_MEI_BSP_H_
--- /dev/null
+/******************************************************************************
+**
+** FILE NAME : ifxmips_mei_ioctl.h
+** PROJECT : Danube
+** MODULES : MEI
+**
+** DATE : 1 Jan 2006
+** AUTHOR : TC Chen
+** DESCRIPTION : MEI Driver
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Version $Date $Author $Comment
+*******************************************************************************/
+#ifndef _IFXMIPS_MEI_IOCTL_H
+#define _IFXMIPS_MEI_IOCTL_H
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+#define PCM_BUFF_SIZE 1024 //bytes
+// interrupt numbers
+
+#if !(defined(_IFXMIPS_ADSL_APP) || defined (_AMAZON_ADSL_APP))
+
+// Number of intervals
+#define INTERVAL_NUM 192 //two days
+typedef struct ifxmips_mei_mib {
+ struct list_head list;
+ struct timeval start_time; //start of current interval
+
+ int AtucPerfLof;
+ int AtucPerfLos;
+ int AtucPerfEs;
+ int AtucPerfInit;
+
+ int AturPerfLof;
+ int AturPerfLos;
+ int AturPerfLpr;
+ int AturPerfEs;
+
+ int AturChanPerfRxBlk;
+ int AturChanPerfTxBlk;
+ int AturChanPerfCorrBlk;
+ int AturChanPerfUncorrBlk;
+
+ //RFC-3440
+ int AtucPerfStatFastR;
+ int AtucPerfStatFailedFastR;
+ int AtucPerfStatSesL;
+ int AtucPerfStatUasL;
+ int AturPerfStatSesL;
+ int AturPerfStatUasL;
+} ifxmips_mei_mib;
+
+typedef struct adslChanPrevTxRate {
+ u32 adslAtucChanPrevTxRate;
+ u32 adslAturChanPrevTxRate;
+} adslChanPrevTxRate;
+
+typedef struct adslPhysCurrStatus {
+ u32 adslAtucCurrStatus;
+ u32 adslAturCurrStatus;
+} adslPhysCurrStatus;
+
+typedef struct ChanType {
+ int interleave;
+ int fast;
+ int bearchannel0;
+ int bearchannel1;
+} ChanType;
+
+typedef struct mib_previous_read {
+ u16 ATUC_PERF_ESS;
+ u16 ATUR_PERF_ESS;
+ u32 ATUR_CHAN_RECV_BLK;
+ u16 ATUR_CHAN_CORR_BLK_INTL;
+ u16 ATUR_CHAN_CORR_BLK_FAST;
+ u16 ATUR_CHAN_UNCORR_BLK_INTL;
+ u16 ATUR_CHAN_UNCORR_BLK_FAST;
+ u16 ATUC_PERF_STAT_FASTR;
+ u16 ATUC_PERF_STAT_FAILED_FASTR;
+ u16 ATUC_PERF_STAT_SESL;
+ u16 ATUC_PERF_STAT_UASL;
+ u16 ATUR_PERF_STAT_SESL;
+} mib_previous_read;
+
+typedef struct mib_flags_pretime {
+ struct timeval ATUC_PERF_LOSS_PTIME;
+ struct timeval ATUC_PERF_LOFS_PTIME;
+ struct timeval ATUR_PERF_LOSS_PTIME;
+ struct timeval ATUR_PERF_LOFS_PTIME;
+ struct timeval ATUR_PERF_LPR_PTIME;
+} mib_flags_pretime;
+
+ // cmv message structures
+#define MP_PAYLOAD_SIZE 12
+typedef struct mpmessage {
+ u16 iFunction;
+ u16 iGroup;
+ u16 iAddress;
+ u16 iIndex;
+ u16 iPayload[MP_PAYLOAD_SIZE];
+} MPMessage;
+#endif
+
+typedef struct meireg {
+ u32 iAddress;
+ u32 iData;
+} meireg;
+
+#define MEIDEBUG_BUFFER_SIZES 50
+typedef struct meidebug {
+ u32 iAddress;
+ u32 iCount;
+ u32 buffer[MEIDEBUG_BUFFER_SIZES];
+} meidebug;
+
+//==============================================================================
+// Group definitions
+//==============================================================================
+#define OPTN 5
+#define CNFG 8
+#define CNTL 1
+#define STAT 2
+#define RATE 6
+#define PLAM 7
+#define INFO 3
+#define TEST 4
+//==============================================================================
+// Opcode definitions
+//==============================================================================
+#define H2D_CMV_READ 0x00
+#define H2D_CMV_WRITE 0x04
+#define H2D_CMV_INDICATE_REPLY 0x10
+#define H2D_ERROR_OPCODE_UNKNOWN 0x20
+#define H2D_ERROR_CMV_UNKNOWN 0x30
+
+#define D2H_CMV_READ_REPLY 0x01
+#define D2H_CMV_WRITE_REPLY 0x05
+#define D2H_CMV_INDICATE 0x11
+#define D2H_ERROR_OPCODE_UNKNOWN 0x21
+#define D2H_ERROR_CMV_UNKNOWN 0x31
+#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41
+#define D2H_ERROR_CMV_WRITE_ONLY 0x51
+#define D2H_ERROR_CMV_READ_ONLY 0x61
+
+#define H2D_DEBUG_READ_DM 0x02
+#define H2D_DEBUG_READ_PM 0x06
+#define H2D_DEBUG_WRITE_DM 0x0a
+#define H2D_DEBUG_WRITE_PM 0x0e
+
+#define D2H_DEBUG_READ_DM_REPLY 0x03
+#define D2H_DEBUG_READ_FM_REPLY 0x07
+#define D2H_DEBUG_WRITE_DM_REPLY 0x0b
+#define D2H_DEBUG_WRITE_FM_REPLY 0x0f
+#define D2H_ERROR_ADDR_UNKNOWN 0x33
+
+#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1
+//==============================================================================
+// INFO register address field definitions
+//==============================================================================
+
+#define INFO_TxState 0
+#define INFO_RxState 1
+#define INFO_TxNextState 2
+#define INFO_RxNextState 3
+#define INFO_TxStateJumpFrom 4
+#define INFO_RxStateJumpFrom 5
+
+#define INFO_ReverbSnrBuf 8
+#define INFO_ReverbEchoSnrBuf 9
+#define INFO_MedleySnrBuf 10
+#define INFO_RxShowtimeSnrBuf 11
+#define INFO_DECdelay 12
+#define INFO_DECExponent 13
+#define INFO_DECTaps 14
+#define INFO_AECdelay 15
+#define INFO_AECExponent 16
+#define INFO_AECTaps 17
+#define INFO_TDQExponent 18
+#define INFO_TDQTaps 19
+#define INFO_FDQExponent 20
+#define INFO_FDQTaps 21
+#define INFO_USBat 22
+#define INFO_DSBat 23
+#define INFO_USFineGains 24
+#define INFO_DSFineGains 25
+#define INFO_BitloadFirstChannel 26
+#define INFO_BitloadLastChannel 27
+#define INFO_PollEOCData 28 // CO specific
+#define INFO_CSNRMargin 29 // CO specific
+#define INFO_RCMsgs1 30
+#define INFO_RMsgs1 31
+#define INFO_RMsgRA 32
+#define INFO_RCMsgRA 33
+#define INFO_RMsg2 34
+#define INFO_RCMsg2 35
+#define INFO_BitLoadOK 36
+#define INFO_RCRates1 37
+#define INFO_RRates1Tab 38
+#define INFO_RMsgs1Tab 39
+#define INFO_RMsgRATab 40
+#define INFO_RRatesRA 41
+#define INFO_RCRatesRA 42
+#define INFO_RRates2 43
+#define INFO_RCRates2 44
+#define INFO_PackedRMsg2 45
+#define INFO_RxBitSwapFlag 46
+#define INFO_TxBitSwapFlag 47
+#define INFO_ShowtimeSNRUpdateCount 48
+#define INFO_ShowtimeFDQUpdateCount 49
+#define INFO_ShowtimeDECUpdateCount 50
+#define INFO_CopyRxBuffer 51
+#define INFO_RxToneBuf 52
+#define INFO_TxToneBuf 53
+#define INFO_Version 54
+#define INFO_TimeStamp 55
+#define INFO_feVendorID 56
+#define INFO_feSerialNum 57
+#define INFO_feVersionNum 58
+#define INFO_BulkMemory 59 //Points to start of bulk memory
+#define INFO_neVendorID 60
+#define INFO_neVersionNum 61
+#define INFO_neSerialNum 62
+
+//==============================================================================
+// RATE register address field definitions
+//==============================================================================
+
+#define RATE_UsRate 0
+#define RATE_DsRate 1
+
+//==============================================================================
+// PLAM (Physical Layer Management) register address field definitions
+// (See G997.1 for reference)
+//==============================================================================
+
+ // ///
+ // Failure Flags ///
+ // ///
+
+#define PLAM_NearEndFailureFlags 0
+#define PLAM_FarEndFailureFlags 1
+
+ // ///
+ // Near End Failure Flags Bit Definitions ///
+ // ///
+
+// ADSL Failures ///
+#define PLAM_LOS_FailureBit 0x0001
+#define PLAM_LOF_FailureBit 0x0002
+#define PLAM_LPR_FailureBit 0x0004
+#define PLAM_RFI_FailureBit 0x0008
+
+// ATM Failures ///
+#define PLAM_NCD_LP0_FailureBit 0x0010
+#define PLAM_NCD_LP1_FailureBit 0x0020
+#define PLAM_LCD_LP0_FailureBit 0x0040
+#define PLAM_LCD_LP1_FailureBit 0x0080
+
+#define PLAM_NCD_BC0_FailureBit 0x0100
+#define PLAM_NCD_BC1_FailureBit 0x0200
+#define PLAM_LCD_BC0_FailureBit 0x0400
+#define PLAM_LCD_BC1_FailureBit 0x0800
+ // ///
+ // Performance Counts ///
+ // ///
+
+#define PLAM_NearEndCrcCnt 2
+#define PLAM_CorrectedRSErrors 3
+
+#define PLAM_NearEndECSCnt 6
+#define PLAM_NearEndESCnt 7
+#define PLAM_NearEndSESCnt 8
+#define PLAM_NearEndLOSSCnt 9
+#define PLAM_NearEndUASLCnt 10
+
+#define PLAM_NearEndHECErrCnt 11
+
+#define PLAM_NearEndHECTotCnt 16
+#define PLAM_NearEndCellTotCnt 18
+#define PLAM_NearEndSfCntLSW 20
+#define PLAM_NearEndSfCntMSW 21
+
+#define PLAM_FarEndFebeCnt 24
+
+#define PLAM_FarEndFecCnt 28
+
+#define PLAM_FarEndFECSCnt 32
+#define PLAM_FarEndESCnt 33
+#define PLAM_FarEndSESCnt 34
+#define PLAM_FarEndLOSSCnt 35
+#define PLAM_FarEndUASLCnt 36
+
+#define PLAM_FarEndHECErrCnt 37
+
+#define PLAM_FarEndHECTotCnt 41
+
+#define PLAM_FarEndCellTotCnt 43
+
+#define PLAM_SNRMargin_0_1db 45
+
+#define PLAM_SNRMargin 46
+
+//==============================================================================
+// CNTL register address and bit field definitions
+//==============================================================================
+
+#define CNTL_ModemControl 0
+
+#define CNTL_ModemReset 0x0
+#define CNTL_ModemStart 0x2
+
+//==============================================================================
+// STAT register address and bit field definitions
+//==============================================================================
+
+#define STAT_MacroState 0
+#define STAT_Mode 1
+#define STAT_DMTFramingMode 2
+#define STAT_SleepState 3
+#define STAT_Misc 4
+#define STAT_FailureState 5
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_OLRStatus provides status of OLR
+ //16-bit STAT_OLRStatus_DS
+ // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
+ // [3:2]: Reserved
+ // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA)
+ // [7:6]: Reserved
+ // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits).
+ // [11]: 1=Receive Response, 0=not
+ // [15:12]: Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_OLRStatus_DS 6
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_OLRStatus provides status of OLR
+ // 16-bit STAT_OLRStatus_US CMV
+ // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
+ // [3:2]: Reserved
+ // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA)
+ // [7:6]: Reserved
+ // [8]: 1=Request Received. 0=not.
+ // [10:9]: Reserved
+ // [11]: 1=Response Sent, 0=not
+ // [15:12]: Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+///
+#define STAT_OLRStatus_US 7
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_PMStatus provides status of PM
+ // 16-bit STAT_PMStatus CMV
+ // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted
+ // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM
+ // [3]: Reserved
+ // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim)
+ // [7:6]: Reserved
+ // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits).
+ // [11]: 1=Response, 0=not
+ // [15:12]: Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_PMStatus 8
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError
+ // [3:0]: OLR/PM response reason code
+ // [7:4]: OLR/PM Internal error code
+ // [15:8]: OLR/PM Reserved for future
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_OLRError_DS 9
+#define STAT_OLRError_US 10
+#define STAT_PMError 11
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_MacroState
+// MacroState reflects the high level state of the modem
+
+#define STAT_InitState 0x0000
+#define STAT_ReadyState 0x0001
+#define STAT_FailState 0x0002
+#define STAT_IdleState 0x0003
+#define STAT_QuietState 0x0004
+#define STAT_GhsState 0x0005
+#define STAT_FullInitState 0x0006
+#define STAT_ShowTimeState 0x0007
+#define STAT_FastRetrainState 0x0008
+#define STAT_LoopDiagMode 0x0009
+#define STAT_ShortInit 0x000A // Bis short initialization ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_Mode
+// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use
+// G.Hs or some other mechanism to negotiate the specific mode of operation.
+// The OPTN_modeControl CMV is used to select a set of desired modes.
+// The STAT_Mode CMV indicates which mode was actually selected.
+
+#define STAT_ConfigMode_T1413 0x0001
+#define STAT_ConfigMode_G992_2_AB 0x0002
+#define STAT_ConfigMode_G992_1_A 0x0004
+#define STAT_ConfigMode_G992_1_B 0x0008
+#define STAT_ConfigMode_G992_1_C 0x0010
+#define STAT_ConfigMode_G992_2_C 0x0020
+
+#define STAT_ConfigMode_G992_3_A 0x0100
+#define STAT_ConfigMode_G992_3_B 0x0200
+#define STAT_ConfigMode_G992_3_I 0x0400
+#define STAT_ConfigMode_G992_3_J 0x0800
+#define STAT_ConfigMode_G992_3_L 0x1000
+
+#define STAT_ConfigMode_G992_4_A 0x2000
+#define STAT_ConfigMode_G992_4_I 0x4000
+
+#define STAT_ConfigMode_G992_5 0x8000
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_DMTFramingMode
+// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode
+// status is not applicable in BIS mode and its value is undefined
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_FramingModeMask 0x0003
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_Misc
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_OverlappedSpectrum 0x0008
+#define STAT_TCM 0x0010
+#define STAT_TDQ_at_1104 0x0020
+#define STAT_T1413_Signal_Detected 0x0040
+#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1
+#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_FailureState
+// when the MacroSTate indicates the fail state, FailureState provides a failure code
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define E_CODE_NO_ERROR 0
+#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */
+#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */
+#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */
+#define E_CODE_TX_AOC_FIFO_OVERFLOW 4
+#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/
+#define E_CODE_BITLOAD 6 // bit loading fails */
+#define E_CODE_ST_ERROR 7 // showtime CRC error */
+#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */
+#define E_CODE_C_TONES 9 // detected C_TONES */
+#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */
+#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */
+#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */
+#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */
+#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */
+#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */
+#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */
+#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */
+#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */
+#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */
+#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */
+#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */
+#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */
+#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */
+#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */
+#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */
+#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */
+#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */
+#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */
+#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */
+#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */
+#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */
+#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */
+#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */
+#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */
+#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */
+#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */
+#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */
+#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */
+#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */
+#define E_CODE_BAD_MEM_ACCESS 46
+#define E_CODE_BAD_INSTRUCTION_ACCESS 47
+#define E_CODE_TX_EOC_FIFO_OVERFLOW 48
+#define E_CODE_RX_EOC_FIFO_OVERFLOW 49
+#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//STAT_OLRStatus:
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_OLRPM_IDLE 0x0000
+#define STAT_OLRPM_IN_PROGRESS 0x0001
+#define STAT_OLRPM_COMPLETE 0x0002
+#define STAT_OLRPM_ABORTED 0x0003
+#define STAT_OLRPM_RESPONSE 0x0800
+
+#define STAT_OLR_BITSWAP 0x0010
+#define STAT_OLR_DRR 0x0020
+#define STAT_OLR_SRA 0x0030
+
+//STAT_PMStatus_US:
+#define STAT_PM_CO_REQ 0x0004
+#define STAT_PM_SIMPLE_REQ 0x0010
+#define STAT_PM_L2_REQ 0x0020
+#define STAT_PM_L2_TRIM_REQ 0x0030
+
+// STAT_OLRError_DS, STAT_OLRError_US
+//4 bit response reason code:
+#define RESP_BUSY 0x01
+#define RESP_INVALID_PARAMETERS 0x02
+#define RESP_NOT_ENABLED 0x03
+#define RESP_NOT_SUPPORTED 0x04
+
+//4 bit internal error code (common for OLR and PM)
+#define REQ_INVALID_BiGi 0x10
+#define REQ_INVALID_Lp 0x20
+#define REQ_INVALID_Bpn 0x30
+#define REQ_INVALID_FRAMING_CONSTRAINT 0x40
+#define REQ_NOT_IN_L0_STATE 0x50
+#define REQ_NOT_IN_L2_STATE 0x60
+#define REQ_INVALID_PCB 0x70
+#define REQ_VIOLATES_MARGIN 0x80
+
+//STAT_PMError
+//4 bit response reason code:
+#define RESP_STATE_NOT_DESIRED 0x03
+#define RESP_INFEASIBLE_PARAMETERS 0x04
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN register address and bit field definitions
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_ModeControl 0
+#define OPTN_DMTLnkCtl 1
+// Reserved 2
+#define OPTN_GhsControl 3
+// Reserved 4
+#define OPTN_PwrManControl 5
+#define OPTN_AnnexControl 6
+#define OPTN_ModeControl1 7
+// Reserved 8
+#define OPTN_StateMachineCtrl 9
+// Reserved 10
+// Reserved 11
+#define OPTN_BisLinkControl 12
+#define OPTN_ATMAddrConfig 13
+#define OPTN_ATMNumCellConfig 14
+
+// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may ///
+// use G.Hs or some other mechanism to negotiate the specific mode of operation. ///
+// The OPTN_ModeControl CMV is used to select a set of desired modes ///
+// The STAT_ModeControl CMV indicates which mode was actually selected ///
+
+// OPTN_ModeControl
+#define OPTN_ConfigMode_T1413 0x0001
+#define OPTN_ConfigMode_G992_2_AB 0x0002
+#define OPTN_ConfigMode_G992_1_A 0x0004
+#define OPTN_ConfigMode_G992_1_B 0x0008
+#define OPTN_ConfigMode_G992_1_C 0x0010
+#define OPTN_ConfigMode_G992_2_C 0x0020
+
+#define OPTN_ConfigMode_G992_3_A 0x0100
+#define OPTN_ConfigMode_G992_3_B 0x0200
+#define OPTN_ConfigMode_G992_3_I 0x0400
+#define OPTN_ConfigMode_G992_3_J 0x0800
+#define OPTN_ConfigMode_G992_3_L 0x1000
+
+#define OPTN_ConfigMode_G992_4_A 0x2000
+#define OPTN_ConfigMode_G992_4_I 0x4000
+
+#define OPTN_ConfigMode_G992_5 0x8000
+
+// OPTN_PwrManControl
+#define OPTN_PwrManWakeUpGhs 0x1
+#define OPTN_PwrManWakeUpFR 0x2
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_DMT Link Control
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+#define OPTN_DMT_DualLatency_Dis 0x200
+#define OPTN_DMT_S_Dis 0x100
+#define OPTN_DMT_FRAMINGMODE 0x1
+#define OPTN_DMT_FRAMINGMODE_MASK 0x7
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_BIS Link Control
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+#define OPTN_BisLinkContrl_LineProbeDis 0x1
+#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2
+#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_GhsControl
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+// for OPTN_GhsControl, we will assign 16bit word as follows
+// bit 0~3: set the control over which start(initial) message CPE will send:
+//
+// BIT: 2 1 0
+// 0 0 1 CLR
+// 0 1 0 MR
+// 0 1 1 MS
+// 1 0 0 MP
+//
+// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange
+// BIT: 5 4
+// 0 1 MS
+// 1 0 MR
+// 1 1 MP
+//
+// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default.
+// BIT: 15
+// 1 means session one
+//
+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_GHS_ST_GHS 0x8000
+#define OPTN_GHS_INIT_MASK 0x000F
+#define OPTN_GHS_RESP_MASK 0x00F0
+
+#define OPTN_RTInitTxMsg_CLR 0x0001
+#define OPTN_RTInitTxMsg_MR 0x0002
+#define OPTN_RTInitTxMsg_MS 0x0003
+#define OPTN_RTInitTxMsg_MP 0x0004
+
+#define OPTN_RTRespTxMsg_MS 0x0010
+#define OPTN_RTRespTxMsg_MR 0x0020
+#define OPTN_RTRespTxMsg_MP 0x0030
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_AnnexControl
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+// G.992.3 Annex A/L1/L2 US PSD Mask preferred
+
+#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000
+#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask ///
+#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask ///
+#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//OPTN_ATMAddrConfig
+// Bits 4:0 are Utopia address for BC1
+// Bits 9:5 are Utopia address for BC0
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_UTPADDR_BC1 0x001F
+#define OPTN_UTPADDR_BC0 0x03E0
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//OPTN_ATMNumCellConfig
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 ///
+#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// CNFG register address field ///
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////
+// these cmvs are used by bis handshake ///
+///////////////////////////////////////////
+
+// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t)
+#define CNFG_TPS_TC_DS0 0
+#define CNFG_TPS_TC_DS1 1
+#define CNFG_TPS_TC_US0 2
+#define CNFG_TPS_TC_US1 3
+
+#define CNFG_HDLC_Overhead_Requirements 4
+
+// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t)
+#define CNFG_PMS_TC_DS0 5
+#define CNFG_PMS_TC_DS1 6
+#define CNFG_PMS_TC_US0 7
+#define CNFG_PMS_TC_US1 8
+
+// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t)
+#define CNFG_PMD_PARAMETERS 9
+
+////////////////////////////////////////////////////////////
+// these cmvs are used by bis training and showtime code ///
+////////////////////////////////////////////////////////////
+
+////////////////
+// Tx Config ///
+////////////////
+#define CNFG_tx_Cnfg_Nbc 10
+#define CNFG_tx_Cnfg_Nlp 11
+#define CNFG_tx_Cnfg_Rp 12
+#define CNFG_tx_Cnfg_Mp 13
+#define CNFG_tx_Cnfg_Lp 14
+#define CNFG_tx_Cnfg_Tp 15
+#define CNFG_tx_Cnfg_Dp 16
+#define CNFG_tx_Cnfg_Bpn 17
+#define CNFG_tx_Cnfg_FramingMode 18
+#define CNFG_tx_Cnfg_MSGLp 19
+#define CNFG_tx_Cnfg_MSGc 20
+
+////////////////
+// Rx Config ///
+////////////////
+#define CNFG_rx_Cnfg_Nbc 21
+#define CNFG_rx_Cnfg_Nlp 22
+#define CNFG_rx_Cnfg_Rp 23
+#define CNFG_rx_Cnfg_Mp 24
+#define CNFG_rx_Cnfg_Lp 25
+#define CNFG_rx_Cnfg_Tp 26
+#define CNFG_rx_Cnfg_Dp 27
+#define CNFG_rx_Cnfg_Bpn 28
+#define CNFG_rx_Cnfg_FramingMode 29
+#define CNFG_rx_Cnfg_MSGLp 30
+#define CNFG_rx_Cnfg_MSGc 31
+
+#define CNFG_tx_Cnfg_BCnToLPp 32
+#define CNFG_rx_Cnfg_BCnToLPp 33
+
+#endif
--- /dev/null
+/******************************************************************************
+**
+** FILE NAME : ifxmips_mei_linux.h
+** PROJECT : Danube
+** MODULES : MEI
+**
+** DATE : 1 Jan 2006
+** AUTHOR : TC Chen
+** DESCRIPTION : MEI Driver
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Version $Date $Author $Comment
+*******************************************************************************/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <asm/semaphore.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+
+#undef CONFIG_DEVFS_FS //165204:henryhsu devfs will make mei open file fail.
+
+#ifdef CONFIG_DEVFS_FS
+#include <linux/devfs_fs_kernel.h>
+#endif
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+#endif
+
+#include <linux/list.h>
+#include <linux/delay.h>
+#define __LINUX__
+
+#ifdef CONFIG_PROC_FS
+#define PROC_ITEMS 8
+#define MEI_DIRNAME "mei"
+#endif
+
+#include <asm/ifxmips/ifxmips.h>
+#include <asm/ifxmips/ifxmips_irq.h>
+#include <asm/ifxmips/ifxmips_mei.h>
+#include <asm/ifxmips/ifxmips_mei_app.h>
+#include <asm/ifxmips/ifxmips_mei_ioctl.h>
+#include <asm/ifxmips/ifxmips_mei_app_ioctl.h>
+#include <asm/ifxmips/ifxmips_gpio.h>
+#include <asm/ifxmips/ifxmips_led.h>
+#include <asm/ifxmips/ifxmips_irq.h>
+
+#ifdef CONFIG_DEVFS_FS
+#define IFXMIPS_DEVNAME "ifxmips"
+#endif //ifdef CONFIG_DEVFS_FS
+
+#define MEI_LOCKINT(var) \
+ local_save_flags(var);\
+ local_irq_disable()
+#define MEI_UNLOCKINT(var) \
+ local_irq_restore(var)
+
+#define MEI_MUTEX_INIT(id,flag) \
+ sema_init(&id,flag)
+#define MEI_MUTEX_LOCK(id) \
+ down_interruptible(&id)
+#define MEI_MUTEX_UNLOCK(id) \
+ up(&id)
+
+#define MEI_MASK_AND_ACK_IRQ \
+ ifxmips_mask_and_ack_irq
+
+#define MEI_DISABLE_IRQ \
+ disable_irq
+#define MEI_ENABLE_IRQ \
+ enable_irq
+
+#define MEI_WAIT(ms) \
+ {\
+ set_current_state(TASK_INTERRUPTIBLE);\
+ schedule_timeout(ms);\
+ }
+
+#define MEI_INIT_WAKELIST(name,queue) \
+ init_waitqueue_head(&queue)
+
+#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\
+ interruptible_sleep_on_timeout(&ev,timeout)
+
+#define MEI_WAIT_EVENT(ev)\
+ interruptible_sleep_on(&ev)
+#define MEI_WAKEUP_EVENT(ev)\
+ wake_up_interruptible(&ev)
+
+typedef unsigned long MEI_intstat_t;
+typedef struct semaphore MEI_mutex_t;
+typedef struct file MEI_file_t;
+typedef struct inode MEI_inode_t;
+
+extern void mask_and_ack_ifxmips_irq (unsigned int irq_nr);
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_PMU_H__
+#define _IFXMIPS_PMU_H__
+
+
+#define IFXMIPS_PMU_PWDCR_DMA 0x0020
+#define IFXMIPS_PMU_PWDCR_USB 0x8041
+#define IFXMIPS_PMU_PWDCR_LED 0x0800
+#define IFXMIPS_PMU_PWDCR_GPT 0x1000
+#define IFXMIPS_PMU_PWDCR_PPE 0x2000
+#define IFXMIPS_PMU_PWDCR_FPI 0x4000
+
+void ifxmips_pmu_enable(unsigned int module);
+void ifxmips_pmu_disable(unsigned int module);
+
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXPROM_H__
+#define _IFXPROM_H__
+
+extern void prom_printf(const char *fmt, ...);
+extern u32 *prom_get_cp1_base(void);
+extern u32 prom_get_cp1_size(void);
+extern int ifxmips_has_brn_block(void);
+
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _IFXMIPS_CGU_H__
+#define _IFXMIPS_CGU_H__
+
+#define BASIC_INPUT_CLOCK_FREQUENCY_1 35328000
+#define BASIC_INPUT_CLOCK_FREQUENCY_2 36000000
+
+#define BASIS_INPUT_CRYSTAL_USB 12000000
+
+#define GET_BITS(x, msb, lsb) (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
+
+#define CGU_PLL0_PHASE_DIVIDER_ENABLE (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 31))
+#define CGU_PLL0_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 30))
+#define CGU_PLL0_CFG_DSMSEL (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 28))
+#define CGU_PLL0_CFG_FRAC_EN (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 27))
+#define CGU_PLL1_SRC (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 31))
+#define CGU_PLL1_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 30))
+#define CGU_PLL1_CFG_DSMSEL (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 28))
+#define CGU_PLL1_CFG_FRAC_EN (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 27))
+#define CGU_PLL2_PHASE_DIVIDER_ENABLE (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 20))
+#define CGU_PLL2_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 19))
+#define CGU_SYS_FPI_SEL (1 << 6)
+#define CGU_SYS_DDR_SEL 0x3
+#define CGU_PLL0_SRC (1 << 29)
+
+#define CGU_PLL0_CFG_PLLK GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 26, 17)
+#define CGU_PLL0_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 12, 6)
+#define CGU_PLL0_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 5, 2)
+#define CGU_PLL1_CFG_PLLK GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 26, 17)
+#define CGU_PLL1_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 12, 6)
+#define CGU_PLL1_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 5, 2)
+#define CGU_PLL2_SRC GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 18, 17)
+#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 16, 13)
+#define CGU_PLL2_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 12, 6)
+#define CGU_PLL2_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 5, 2)
+#define CGU_IF_CLK_PCI_CLK GET_BITS(*IFXMIPS_CGU_IF_CLK, 23, 20)
+
+
+unsigned int cgu_get_mips_clock(int cpu);
+unsigned int cgu_get_io_region_clock(void);
+unsigned int cgu_get_fpi_bus_clock(int fpi);
+void cgu_setup_pci_clk(int internal_clock);
+unsigned int ifxmips_get_ddr_hz(void);
+unsigned int ifxmips_get_fpi_hz(void);
+unsigned int ifxmips_get_cpu_hz(void);
+
+#endif
--- /dev/null
+/*
+ * include/asm-mips/mach-ifxmips/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#ifndef _IFXMIPS_GPIO_H_
+#define _IFXMIPS_GPIO_H_
+
+#include <asm/ifxmips/ifxmips.h>
+#include <asm/ifxmips/ifxmips_gpio.h>
+
+#define GPIO_TO_PORT(x) ((x > 15) ? (1) : (0))
+#define GPIO_TO_GPIO(x) ((x > 15) ? (x-16) : (x))
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ ifxmips_port_set_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ ifxmips_port_set_dir_in(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ ifxmips_port_clear_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ ifxmips_port_set_dir_out(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ ifxmips_port_get_input(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ return 0;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (value)
+ ifxmips_port_set_output(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+ else
+ ifxmips_port_clear_output(GPIO_TO_PORT(gpio),
+ GPIO_TO_GPIO(gpio));
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return 0;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return 0;
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return 0;
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+ might_sleep();
+ return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+ might_sleep();
+ gpio_set_value(gpio, value);
+}
+
+static inline int gpio_is_valid(int number)
+{
+ return ((unsigned)number) < 16;
+}
+
+#endif
--- /dev/null
+/*
+ * include/asm-mips/mach-ifxmips/irq.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#ifndef __IFXMIPS_IRQ_H
+#define __IFXMIPS_IRQ_H
+
+#define NR_IRQS 256
+#include_next <irq.h>
+
+#endif
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_MIPS_MACH_IFXMIPS_WAR_H
+#define __ASM_MIPS_MACH_IFXMIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif
#include <linux/mm.h>
#include <asm/ifxmips/ifxmips.h>
#include <asm/ifxmips/ifxmips_irq.h>
-#include <asm/ifxmips/ifxmips_cgu.h>
+#include <asm/mach-ifxmips/cgu.h>
#include <asm/addrspace.h>
#include <linux/vmalloc.h>
unsigned long magic;
unsigned long temp;
ifxmips_copy_from(&ifxmips_map, &magic, start_offset, 4);
- if (!(ntohl(magic) == 0x27051956)) {
- printk(KERN_INFO "ifxmips_mtd: invalid magic (0x%08X) of kernel at 0x%08lx \n", ntohl(magic), start_offset);
+ if (le32_to_cpu(magic) != 0x56190527) {
+ printk(KERN_INFO "ifxmips_mtd: invalid magic (0x%08X) of kernel at 0x%08lx \n", le32_to_cpu(magic), start_offset);
return 0;
}
ifxmips_copy_from(&ifxmips_map, &temp, start_offset + 12, 4);
{
unsigned long temp;
ifxmips_copy_from(&ifxmips_map, &temp, start_offset, 4);
- return temp == SQUASHFS_MAGIC;
+ return le32_to_cpu(temp) == SQUASHFS_MAGIC;
}
static int ifxmips_mtd_probe(struct platform_device *dev)
int ifxmips_ifxmips_mii_open(struct net_device *dev)
{
- struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv;
+ struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
struct dma_device_info *dma_dev = priv->dma_device;
int i;
int ifxmips_mii_release(struct net_device *dev)
{
- struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv;
+ struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
struct dma_device_info *dma_dev = priv->dma_device;
int i;
int ifxmips_mii_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
{
- struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv;
+ struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
unsigned char *buf = NULL;
struct sk_buff *skb = NULL;
int len = 0;
int ifxmips_mii_hw_tx(char *buf, int len, struct net_device *dev)
{
int ret = 0;
- struct ifxmips_mii_priv *priv = dev->priv;
+ struct ifxmips_mii_priv *priv = netdev_priv(dev);
struct dma_device_info *dma_dev = priv->dma_device;
ret = dma_device_write(dma_dev, buf, len, priv->skb);
return ret;
{
int len;
char *data;
- struct ifxmips_mii_priv *priv = dev->priv;
+ struct ifxmips_mii_priv *priv = netdev_priv(dev);
struct dma_device_info *dma_dev = priv->dma_device;
len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
void ifxmips_mii_tx_timeout(struct net_device *dev)
{
int i;
- struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv;
+ struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
priv->stats.tx_errors++;
for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
static struct net_device_stats *ifxmips_get_stats(struct net_device *dev)
{
- return (struct net_device_stats *)dev->priv;
+ return &((struct ifxmips_mii_priv *)netdev_priv(dev))->stats;
}
static int ifxmips_mii_dev_init(struct net_device *dev)
{
int i;
- struct ifxmips_mii_priv *priv;
-
+ struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
ether_setup(dev);
printk(KERN_INFO "ifxmips_mii0: %s is up\n", dev->name);
dev->open = ifxmips_ifxmips_mii_open;
dev->get_stats = ifxmips_get_stats;
dev->tx_timeout = ifxmips_mii_tx_timeout;
dev->watchdog_timeo = 10 * HZ;
- memset(dev->priv, 0, sizeof(struct ifxmips_mii_priv));
- priv = dev->priv;
+ memset(priv, 0, sizeof(struct ifxmips_mii_priv));
priv->dma_device = dma_device_reserve("PPE");
if (!priv->dma_device) {
BUG();
static int ifxmips_mii_remove(struct platform_device *dev)
{
- struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)ifxmips_mii0_dev->priv;
+ struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(ifxmips_mii0_dev);
printk(KERN_INFO "ifxmips_mii0: ifxmips_mii0 cleanup\n");
dma_device_unregister(priv->dma_device);
dma_device_release(priv->dma_device);
kfree(priv->dma_device);
- kfree(ifxmips_mii0_dev->priv);
unregister_netdev(ifxmips_mii0_dev);
return 0;
}
#include <linux/platform_device.h>
#include <linux/uaccess.h>
-#include <asm/ifxmips/ifxmips_cgu.h>
+#include <asm/mach-ifxmips/cgu.h>
#include <asm/ifxmips/ifxmips.h>
#define IFXMIPS_WDT_PW1 0x00BE0000
+++ /dev/null
-//*************************************************************************
-//* Summary of definitions which are used in each peripheral *
-//*************************************************************************
-
-#ifndef peripheral_definitions_h
-#define peripheral_definitions_h
-
-////#include "cpu.h"
-//
-///* These files have to be included by each peripheral */
-//#include <sysdefs.h>
-//#include <excep.h>
-//#include <cpusubsys.h>
-//#include <sys_api.h>
-//#include <mips.h>
-//#include "SRAM_address_map.h"
-//
-///* common header files for all CPU's */
-//#include "iiu.h"
-//#include "bcu.h"
-//#include "FPI_address_map.h"
-//#include "direct_interrupts.h"
-
-/////////////////////////////////////////////////////////////////////////
-
-//extern int _clz();
-//extern void _nop();
-//extern void _sleep();
-//extern void sys_enable_int();
-
-typedef unsigned char UINT8;
-typedef signed char INT8;
-typedef unsigned short UINT16;
-typedef signed short INT16;
-typedef unsigned int UINT32;
-typedef signed int INT32;
-typedef unsigned long long UINT64;
-typedef signed long long INT64;
-
-#define REG8( addr ) (*(volatile UINT8 *) (addr))
-#define REG16( addr ) (*(volatile UINT16 *)(addr))
-#define REG32( addr ) (*(volatile UINT32 *)(addr))
-#define REG64( addr ) (*(volatile UINT64 *)(addr))
-
-/* define routine to set FPI access in Supervisor Mode */
-#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG)
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm
-/* enable all Interrupts in IIU */
-//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask
-///* get all high priority interrupt bits in IIU */
-//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED)
-///* signal ends of interrupt to IIU */
-//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit
-///* force IIU interrupt register */
-//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data
-///* get all bits of interrupt register */
-//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR)
-/* insert a NOP instruction */
-#define NOP _nop()
-/* CPU goes to power down mode until interrupt occurs */
-#define IFX_CPU_SLEEP _sleep()
-/* enable all interrupts to CPU */
-#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int()
-/* get all low priority interrupt bits in peripheral */
-#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg)
-/* clear low priority interrupt bit in peripheral */
-#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit
-/* write FPI bus */
-#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data
-#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data
-#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data
-/* read FPI bus */
-#define READ_FPI_BYTE(addr) REG8(addr)
-#define READ_FPI_16BIT(addr) REG16(addr)
-#define READ_FPI_32BIT(addr) REG32(addr)
-/* write peripheral register */
-#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
-#else //not CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
-#endif //CONFIG_CPU_LITTLE_ENDIAN
-
-/* read peripheral register */
-#define READ_PERIPHERAL_REGISTER(addr) REG32(addr)
-
-/* read/modify(or)/write peripheral register */
-#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
-/* read/modify(and)/write peripheral register */
-#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data
-
-/* CPU-independent mnemonic constants */
-/* CLC register bits */
-#define IFX_CLC_ENABLE 0x00000000
-#define IFX_CLC_DISABLE 0x00000001
-#define IFX_CLC_DISABLE_STATUS 0x00000002
-#define IFX_CLC_SUSPEND_ENABLE 0x00000004
-#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008
-#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010
-#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
-#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00
-#define IFX_CLC_RUN_DIVIDER_OFFSET 8
-#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000
-#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16
-#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
-#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
-
-/* number of cycles to wait for interrupt service routine to be called */
-#define WAIT_CYCLES 50
-
-#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */
+++ /dev/null
-/*
- * ifx_ssc.h defines some data sructures used in ifx_ssc.c
- *
- * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
- *
- *
- */
-
-#ifndef __IFX_SSC_H
-#define __IFX_SSC_H
-#ifdef __KERNEL__
-#include <asm/ifxmips/ifx_ssc_defines.h>
-#endif //__KERNEL__
-
-#define PORT_CNT 1 // assume default value
-
-/* symbolic constants to be used in SSC routines */
-
-// ### TO DO: bad performance
-#define IFX_SSC_TXFIFO_ITL 1
-#define IFX_SSC_RXFIFO_ITL 1
-
-struct ifx_ssc_statistics {
- unsigned int abortErr; /* abort error */
- unsigned int modeErr; /* master/slave mode error */
- unsigned int txOvErr; /* TX Overflow error */
- unsigned int txUnErr; /* TX Underrun error */
- unsigned int rxOvErr; /* RX Overflow error */
- unsigned int rxUnErr; /* RX Underrun error */
- unsigned int rxBytes;
- unsigned int txBytes;
-};
-
-struct ifx_ssc_hwopts {
- unsigned int AbortErrDetect:1; /* Abort Error detection (in slave mode) */
- unsigned int rxOvErrDetect:1; /* Receive Overflow Error detection */
- unsigned int rxUndErrDetect:1; /* Receive Underflow Error detection */
- unsigned int txOvErrDetect:1; /* Transmit Overflow Error detection */
- unsigned int txUndErrDetect:1; /* Transmit Underflow Error detection */
- unsigned int echoMode:1; /* Echo mode */
- unsigned int loopBack:1; /* Loopback mode */
- unsigned int idleValue:1; /* Idle value */
- unsigned int clockPolarity:1; /* Idle clock is high or low */
- unsigned int clockPhase:1; /* Tx on trailing or leading edge */
- unsigned int headingControl:1; /* LSB first or MSB first */
- unsigned int dataWidth:6; /* from 2 up to 32 bits */
- unsigned int masterSelect:1; /* Master or Slave mode */
- unsigned int modeRxTx:2; /* rx/tx mode */
- unsigned int gpoCs:8; /* choose outputs to use for chip select */
- unsigned int gpoInv:8; /* invert GPO outputs */
-};
-
-struct ifx_ssc_frm_opts {
- bool FrameEnable; // SFCON.SFEN
- unsigned int DataLength; // SFCON.DLEN
- unsigned int PauseLength; // SFCON.PLEN
- unsigned int IdleData; // SFCON.IDAT
- unsigned int IdleClock; // SFCON.ICLK
- bool StopAfterPause; // SFCON.STOP
-};
-
-struct ifx_ssc_frm_status {
- bool DataBusy; // SFSTAT.DBSY
- bool PauseBusy; // SFSTAT.PBSY
- unsigned int DataCount; // SFSTAT.DCNT
- unsigned int PauseCount; // SFSTAT.PCNT
- bool EnIntAfterData; // SFCON.IBEN
- bool EnIntAfterPause; // SFCON.IAEN
-};
-
-typedef struct {
- char *buf;
- size_t len;
-} ifx_ssc_buf_item_t;
-
-// data structures for batch execution
-typedef union {
- struct {
- bool save_options;
- } init;
- ifx_ssc_buf_item_t read;
- ifx_ssc_buf_item_t write;
- ifx_ssc_buf_item_t rd_wr;
- unsigned int set_baudrate;
- struct ifx_ssc_frm_opts set_frm;
- unsigned int set_gpo;
- struct ifx_ssc_hwopts set_hwopts;
-} ifx_ssc_batch_cmd_param;
-
-struct ifx_ssc_batch_list {
- unsigned int cmd;
- ifx_ssc_batch_cmd_param cmd_param;
- struct ifx_ssc_batch_list *next;
-};
-
-#ifdef __KERNEL__
-#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
-
-struct ifx_ssc_port {
- unsigned long mapbase;
- struct ifx_ssc_hwopts opts;
- struct ifx_ssc_statistics stats;
- struct ifx_ssc_frm_status frm_status;
- struct ifx_ssc_frm_opts frm_opts;
- /* wait queue for ifx_ssc_read() */
- wait_queue_head_t rwait, pwait;
- int port_nr;
- char port_is_open; /* exclusive open - boolean */
-// int no_of_bits; /* number of _valid_ bits */
-// int elem_size; /* shift for element (no of bytes)*/
- /* buffer and pointers to the read/write position */
- char *rxbuf; /* buffer for RX */
- char *rxbuf_end; /* buffer end pointer for RX */
- volatile char *rxbuf_ptr; /* buffer write pointer for RX */
- char *txbuf; /* buffer for TX */
- char *txbuf_end; /* buffer end pointer for TX */
- volatile char *txbuf_ptr; /* buffer read pointer for TX */
- unsigned int baud;
- /* each channel has its own interrupts */
- /* (transmit/receive/error/frame) */
- unsigned int txirq, rxirq, errirq, frmirq;
-};
-/* default values for SSC configuration */
-// values of CON
-#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */
-#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */
-#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */
-#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */
-#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */
-#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */
-#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */
-#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
-#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
-#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX
-// other values
-#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */
-#ifdef CONFIG_USE_EMULATOR
-#define IFX_SSC_DEF_BAUDRATE 10000
-#else
-#define IFX_SSC_DEF_BAUDRATE 2000000
-#endif
-#define IFX_SSC_DEF_RMC 0x10
-
-#define IFX_SSC_DEF_TXFIFO_FL 8
-#define IFX_SSC_DEF_RXFIFO_FL 1
-
-#if 1 //TODO
-#define IFX_SSC_DEF_GPO_CS 0x3 /* no chip select */
-#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */
-#else
-#error "what is ur Chip Select???"
-#endif
-#define IFX_SSC_DEF_SFCON 0 /* no serial framing */
-#if 0
-#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
- IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
-#endif
-#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
- IFX_SSC_R_BIT | IFX_SSC_E_BIT
-#endif /* __KERNEL__ */
-
-// batch execution commands
-#define IFX_SSC_BATCH_CMD_INIT 1
-#define IFX_SSC_BATCH_CMD_READ 2
-#define IFX_SSC_BATCH_CMD_WRITE 3
-#define IFX_SSC_BATCH_CMD_RD_WR 4
-#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5
-#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6
-#define IFX_SSC_BATCH_CMD_SET_FRM 7
-#define IFX_SSC_BATCH_CMD_SET_GPO 8
-#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9
-//#define IFX_SSC_BATCH_CMD_
-//#define IFX_SSC_BATCH_CMD_
-#define IFX_SSC_BATCH_CMD_END_EXEC 0
-
-/* Macros to configure SSC hardware */
-/* headingControl: */
-#define IFX_SSC_LSB_FIRST 0
-#define IFX_SSC_MSB_FIRST 1
-/* dataWidth: */
-#define IFX_SSC_MIN_DATA_WIDTH 2
-#define IFX_SSC_MAX_DATA_WIDTH 32
-/* master/slave mode select */
-#define IFX_SSC_MASTER_MODE 1
-#define IFX_SSC_SLAVE_MODE 0
-/* rx/tx mode */
-// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
-#define IFX_SSC_MODE_RXTX 0
-#define IFX_SSC_MODE_RX 1
-#define IFX_SSC_MODE_TX 2
-#define IFX_SSC_MODE_OFF 3
-#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
-
-/* GPO values */
-#define IFX_SSC_MAX_GPO_OUT 7
-
-#define IFX_SSC_RXREQ_BLOCK_SIZE 32768
-
-/***********************/
-/* defines for ioctl's */
-/***********************/
-#define IFX_SSC_IOCTL_MAGIC 'S'
-/* read out the statistics */
-#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
-/* clear the statistics */
-#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
-/* set the baudrate */
-#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
-/* get the current baudrate */
-#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
-/* set hardware options */
-#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
-/* get the current hardware options */
-#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
-/* set transmission mode */
-#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
-/* get the current transmission mode */
-#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
-/* abort transmission */
-#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
-#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
-
-/* set general purpose outputs */
-#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
-/* clear general purpose outputs */
-#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
-/* get general purpose outputs */
-#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
-
-/*** serial framing ***/
-/* get status of serial framing */
-#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
-/* get counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
-/* set counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
-
-/*** batch execution ***/
-/* do batch execution */
-#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
-
-#ifdef __KERNEL__
-// routines from ifx_ssc.c
-// ### TO DO
-/* kernel interface for read and write */
-ssize_t ifx_ssc_kread (int, char *, size_t);
-ssize_t ifx_ssc_kwrite (int, const char *, size_t);
-
-#ifdef CONFIG_IFX_VP_KERNEL_TEST
-void ifx_ssc_tc (void);
-#endif // CONFIG_IFX_VP_KERNEL_TEST
-
-#endif //__KERNEL__
-#endif // __IFX_SSC_H
+++ /dev/null
-#ifndef IFX_SSC_DEFINES_H
-#define IFX_SSC_DEFINES_H
-
-#include "ifx_peripheral_definitions.h"
-
-/* maximum SSC FIFO size */
-#define IFX_SSC_MAX_FIFO_SIZE 32
-
-/* register map of SSC */
-
-/* address of the Clock Control Register of the SSC */
-#define IFX_SSC_CLC 0x00000000
-/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0
- bit 1 is hardware modified*/
-#define IFX_SSC_CLC_readmask 0x00FFFFEF
-#define IFX_SSC_CLC_writemask 0x00FFFF3D
-#define IFX_SSC_CLC_hwmask 0x00000002
-#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask)
-
-/* address of Port Input Select Register of the SSC */
-#define IFX_SSC_PISEL 0x00000004
-/* IFX_SSC_PISEL register is significant in lowest three bits only */
-#define IFX_SSC_PISEL_readmask 0x00000007
-#define IFX_SSC_PISEL_writemask 0x00000007
-#define IFX_SSC_PISEL_hwmask 0x00000000
-#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask)
-
-/* address of Identification Register of the SSC */
-#define IFX_SSC_ID 0x00000008
-/* IFX_SSC_ID register is significant in no bit */
-#define IFX_SSC_ID_readmask 0x0000FF3F
-#define IFX_SSC_ID_writemask 0x00000000
-#define IFX_SSC_ID_hwmask 0x00000000
-#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask)
-
-/* address of the Control Register of the SSC */
-#define IFX_SSC_CON 0x00000010
-/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */
-#define IFX_SSC_CON_readmask 0x01DF1FFF
-#define IFX_SSC_CON_writemask 0x01DF1FFF
-#define IFX_SSC_CON_hwmask 0x00000000
-#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask)
-
-/* address of the Status Register of the SSC */
-#define IFX_SSC_STATE 0x00000014
-/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0
- all bits except 1:0 are hardware modified */
-#define IFX_SSC_STATE_readmask 0x771F3F87
-#define IFX_SSC_STATE_writemask 0x00000000
-#define IFX_SSC_STATE_hwmask 0x771F3F84
-#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask)
-
-/* address of the Write Hardware Modified Control Register Bits of the SSC */
-#define IFX_SSC_WHBSTATE 0x00000018
-/* IFX_SSC_WHBSTATE register is write only */
-#define IFX_SSC_WHBSTATE_readmask 0x00000000
-#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF
-#define IFX_SSC_WHBSTATE_hwmask 0x00000000
-#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask)
-
-/* address of the Baudrate Timer Reload Register of the SSC */
-#define IFX_SSC_BR 0x00000040
-/* IFX_SSC_BR register is significant in bit 15 downto 0*/
-#define IFX_SSC_BR_readmask 0x0000FFFF
-#define IFX_SSC_BR_writemask 0x0000FFFF
-#define IFX_SSC_BR_hwmask 0x00000000
-#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask)
-
-/* address of the Baudrate Timer Status Register of the SSC */
-#define IFX_SSC_BRSTAT 0x00000044
-/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/
-#define IFX_SSC_BRSTAT_readmask 0x0000FFFF
-#define IFX_SSC_BRSTAT_writemask 0x00000000
-#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF
-#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask)
-
-/* address of the Transmitter Buffer Register of the SSC */
-#define IFX_SSC_TB 0x00000020
-/* IFX_SSC_TB register is significant in bit 31 downto 0*/
-#define IFX_SSC_TB_readmask 0xFFFFFFFF
-#define IFX_SSC_TB_writemask 0xFFFFFFFF
-#define IFX_SSC_TB_hwmask 0x00000000
-#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask)
-
-/* address of the Reciver Buffer Register of the SSC */
-#define IFX_SSC_RB 0x00000024
-/* IFX_SSC_RB register is significant in no bits*/
-#define IFX_SSC_RB_readmask 0xFFFFFFFF
-#define IFX_SSC_RB_writemask 0x00000000
-#define IFX_SSC_RB_hwmask 0xFFFFFFFF
-#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask)
-
-/* address of the Receive FIFO Control Register of the SSC */
-#define IFX_SSC_RXFCON 0x00000030
-/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_RXFCON_readmask 0x00003F03
-#define IFX_SSC_RXFCON_writemask 0x00003F03
-#define IFX_SSC_RXFCON_hwmask 0x00000000
-#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask)
-
-/* address of the Transmit FIFO Control Register of the SSC */
-#define IFX_SSC_TXFCON 0x00000034
-/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_TXFCON_readmask 0x00003F03
-#define IFX_SSC_TXFCON_writemask 0x00003F03
-#define IFX_SSC_TXFCON_hwmask 0x00000000
-#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask)
-
-/* address of the FIFO Status Register of the SSC */
-#define IFX_SSC_FSTAT 0x00000038
-/* IFX_SSC_FSTAT register is significant in no bit*/
-#define IFX_SSC_FSTAT_readmask 0x00003F3F
-#define IFX_SSC_FSTAT_writemask 0x00000000
-#define IFX_SSC_FSTAT_hwmask 0x00003F3F
-#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask)
-
-/* address of the Data Frame Control register of the SSC */
-#define IFX_SSC_SFCON 0x00000060
-#define IFX_SSC_SFCON_readmask 0xFFDFFFFD
-#define IFX_SSC_SFCON_writemask 0xFFDFFFFD
-#define IFX_SSC_SFCON_hwmask 0x00000000
-#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask)
-
-/* address of the Data Frame Status register of the SSC */
-#define IFX_SSC_SFSTAT 0x00000064
-#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3
-#define IFX_SSC_SFSTAT_writemask 0x00000000
-#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3
-#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask)
-
-/* address of the General Purpose Output Control register of the SSC */
-#define IFX_SSC_GPOCON 0x00000070
-#define IFX_SSC_GPOCON_readmask 0x0000FFFF
-#define IFX_SSC_GPOCON_writemask 0x0000FFFF
-#define IFX_SSC_GPOCON_hwmask 0x00000000
-#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask)
-
-/* address of the General Purpose Output Status register of the SSC */
-#define IFX_SSC_GPOSTAT 0x00000074
-#define IFX_SSC_GPOSTAT_readmask 0x000000FF
-#define IFX_SSC_GPOSTAT_writemask 0x00000000
-#define IFX_SSC_GPOSTAT_hwmask 0x00000000
-#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask)
-
-/* address of the Force GPO Status register of the SSC */
-#define IFX_SSC_WHBGPOSTAT 0x00000078
-#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000
-#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF
-#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000
-#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask)
-
-/* address of the Receive Request Register of the SSC */
-#define IFX_SSC_RXREQ 0x00000080
-#define IFX_SSC_RXREQ_readmask 0x0000FFFF
-#define IFX_SSC_RXREQ_writemask 0x0000FFFF
-#define IFX_SSC_RXREQ_hwmask 0x00000000
-#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask)
-
-/* address of the Receive Count Register of the SSC */
-#define IFX_SSC_RXCNT 0x00000084
-#define IFX_SSC_RXCNT_readmask 0x0000FFFF
-#define IFX_SSC_RXCNT_writemask 0x00000000
-#define IFX_SSC_RXCNT_hwmask 0x0000FFFF
-#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask)
-
-/* address of the DMA Configuration Register of the SSC */
-#define IFX_SSC_DMACON 0x000000EC
-#define IFX_SSC_DMACON_readmask 0x0000FFFF
-#define IFX_SSC_DMACON_writemask 0x00000000
-#define IFX_SSC_DMACON_hwmask 0x0000FFFF
-#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask)
-
-//------------------------------------------------------
-// interrupt register for enabling interrupts, mask register of irq_reg
-#define IFX_SSC_IRN_EN 0xF4
-// read/write
-#define IFX_SSC_IRN_EN_readmask 0x0000000F
-#define IFX_SSC_IRN_EN_writemask 0x0000000F
-#define IFX_SSC_IRN_EN_hwmask 0x00000000
-#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask)
-
-// interrupt register for accessing interrupts
-#define IFX_SSC_IRN_CR 0xF8
-// read/write
-#define IFX_SSC_IRN_CR_readmask 0x0000000F
-#define IFX_SSC_IRN_CR_writemask 0x0000000F
-#define IFX_SSC_IRN_CR_hwmask 0x0000000F
-#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask)
-
-// interrupt register for stimulating interrupts
-#define IFX_SSC_IRN_ICR 0xFC
-// read/write
-#define IFX_SSC_IRN_ICR_readmask 0x0000000F
-#define IFX_SSC_IRN_ICR_writemask 0x0000000F
-#define IFX_SSC_IRN_ICR_hwmask 0x00000000
-#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask)
-
-//---------------------------------------------------------------------
-// Number of IRQs and bitposition of IRQ
-#define IFX_SSC_NUM_IRQ 4
-#define IFX_SSC_T_BIT 0x00000001
-#define IFX_SSC_R_BIT 0x00000002
-#define IFX_SSC_E_BIT 0x00000004
-#define IFX_SSC_F_BIT 0x00000008
-
-/* bit masks for SSC registers */
-
-/* ID register */
-#define IFX_SSC_PERID_REV_MASK 0x0000001F
-#define IFX_SSC_PERID_CFG_MASK 0x00000020
-#define IFX_SSC_PERID_ID_MASK 0x0000FF00
-#define IFX_SSC_PERID_REV_OFFSET 0
-#define IFX_SSC_PERID_CFG_OFFSET 5
-#define IFX_SSC_PERID_ID_OFFSET 8
-#define IFX_SSC_PERID_ID 0x45
-#define IFX_SSC_PERID_DMA_ON 0x00000020
-#define IFX_SSC_PERID_RXFS_MASK 0x003F0000
-#define IFX_SSC_PERID_RXFS_OFFSET 16
-#define IFX_SSC_PERID_TXFS_MASK 0x3F000000
-#define IFX_SSC_PERID_TXFS_OFFSET 24
-
-/* PISEL register */
-#define IFX_SSC_PISEL_MASTER_IN_A 0x0000
-#define IFX_SSC_PISEL_MASTER_IN_B 0x0001
-#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000
-#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002
-#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000
-#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004
-
-/* IFX_SSC_CON register */
-#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000
-#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000
-#define IFX_SSC_CON_IDLE_HIGH 0x00800000
-#define IFX_SSC_CON_IDLE_LOW 0x00000000
-#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000
-#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000
-#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16
-#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000
-#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK)
-
-#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000
-#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000
-
-#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000
-#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000
-#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800
-#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000
-#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400
-#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000
-#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200
-#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000
-#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100
-#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000
-#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00
-#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000
-
-#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080
-#define IFX_SSC_CON_NO_LOOPBACK 0x00000000
-#define IFX_SSC_CON_HALF_DUPLEX 0x00000080
-#define IFX_SSC_CON_FULL_DUPLEX 0x00000000
-#define IFX_SSC_CON_CLOCK_FALL 0x00000040
-#define IFX_SSC_CON_CLOCK_RISE 0x00000000
-#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000
-#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020
-#define IFX_SSC_CON_MSB_FIRST 0x00000010
-#define IFX_SSC_CON_LSB_FIRST 0x00000000
-#define IFX_SSC_CON_ENABLE_CSB 0x00000008
-#define IFX_SSC_CON_DISABLE_CSB 0x00000000
-#define IFX_SSC_CON_INVERT_CSB 0x00000004
-#define IFX_SSC_CON_TRUE_CSB 0x00000000
-#define IFX_SSC_CON_RX_OFF 0x00000002
-#define IFX_SSC_CON_RX_ON 0x00000000
-#define IFX_SSC_CON_TX_OFF 0x00000001
-#define IFX_SSC_CON_TX_ON 0x00000000
-
-/* IFX_SSC_STATE register */
-#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28
-#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000
-#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24
-#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000
-#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16
-#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000
-#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1)
-#define IFX_SSC_STATE_BUSY 0x00002000
-#define IFX_SSC_STATE_RX_UFL 0x00001000
-#define IFX_SSC_STATE_TX_UFL 0x00000800
-#define IFX_SSC_STATE_ABORT_ERR 0x00000400
-#define IFX_SSC_STATE_RX_OFL 0x00000200
-#define IFX_SSC_STATE_TX_OFL 0x00000100
-#define IFX_SSC_STATE_MODE_ERR 0x00000080
-#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004
-#define IFX_SSC_STATE_IS_MASTER 0x00000002
-#define IFX_SSC_STATE_IS_ENABLED 0x00000001
-
-/* WHBSTATE register */
-#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001
-#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001
-#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001
-
-#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002
-#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002
-#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002
-
-#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004
-#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004
-
-#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008
-#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008
-
-#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010
-#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020
-
-#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040
-#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080
-
-#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100
-#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200
-#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400
-#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800
-#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000
-#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000
-#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000
-#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000
-#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50
-#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0
-
-/* BR register */
-#define IFX_SSC_BR_BAUDRATE_OFFSET 0
-#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF
-
-/* BR_STAT register */
-#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0
-#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF
-
-/* TB register */
-#define IFX_SSC_TB_DATA_OFFSET 0
-#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF
-
-/* RB register */
-#define IFX_SSC_RB_DATA_OFFSET 0
-#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF
-
-/* RXFCON and TXFCON registers */
-#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000
-#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001
-#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002
-#define IFX_SSC_XFCON_ITL_MASK 0x00003F00
-#define IFX_SSC_XFCON_ITL_OFFSET 8
-
-/* FSTAT register */
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00
-
-/* GPOCON register */
-#define IFX_SSC_GPOCON_INVOUT0_POS 0
-#define IFX_SSC_GPOCON_INV_OUT0 0x00000001
-#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000
-#define IFX_SSC_GPOCON_INVOUT1_POS 1
-#define IFX_SSC_GPOCON_INV_OUT1 0x00000002
-#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000
-#define IFX_SSC_GPOCON_INVOUT2_POS 2
-#define IFX_SSC_GPOCON_INV_OUT2 0x00000003
-#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000
-#define IFX_SSC_GPOCON_INVOUT3_POS 3
-#define IFX_SSC_GPOCON_INV_OUT3 0x00000008
-#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000
-#define IFX_SSC_GPOCON_INVOUT4_POS 4
-#define IFX_SSC_GPOCON_INV_OUT4 0x00000010
-#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000
-#define IFX_SSC_GPOCON_INVOUT5_POS 5
-#define IFX_SSC_GPOCON_INV_OUT5 0x00000020
-#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000
-#define IFX_SSC_GPOCON_INVOUT6_POS 6
-#define IFX_SSC_GPOCON_INV_OUT6 0x00000040
-#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000
-#define IFX_SSC_GPOCON_INVOUT7_POS 7
-#define IFX_SSC_GPOCON_INV_OUT7 0x00000080
-#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000
-#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF
-#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000
-
-#define IFX_SSC_GPOCON_ISCSB0_POS 8
-#define IFX_SSC_GPOCON_IS_CSB0 0x00000100
-#define IFX_SSC_GPOCON_IS_GPO0 0x00000000
-#define IFX_SSC_GPOCON_ISCSB1_POS 9
-#define IFX_SSC_GPOCON_IS_CSB1 0x00000200
-#define IFX_SSC_GPOCON_IS_GPO1 0x00000000
-#define IFX_SSC_GPOCON_ISCSB2_POS 10
-#define IFX_SSC_GPOCON_IS_CSB2 0x00000400
-#define IFX_SSC_GPOCON_IS_GPO2 0x00000000
-#define IFX_SSC_GPOCON_ISCSB3_POS 11
-#define IFX_SSC_GPOCON_IS_CSB3 0x00000800
-#define IFX_SSC_GPOCON_IS_GPO3 0x00000000
-#define IFX_SSC_GPOCON_ISCSB4_POS 12
-#define IFX_SSC_GPOCON_IS_CSB4 0x00001000
-#define IFX_SSC_GPOCON_IS_GPO4 0x00000000
-#define IFX_SSC_GPOCON_ISCSB5_POS 13
-#define IFX_SSC_GPOCON_IS_CSB5 0x00002000
-#define IFX_SSC_GPOCON_IS_GPO5 0x00000000
-#define IFX_SSC_GPOCON_ISCSB6_POS 14
-#define IFX_SSC_GPOCON_IS_CSB6 0x00004000
-#define IFX_SSC_GPOCON_IS_GPO6 0x00000000
-#define IFX_SSC_GPOCON_ISCSB7_POS 15
-#define IFX_SSC_GPOCON_IS_CSB7 0x00008000
-#define IFX_SSC_GPOCON_IS_GPO7 0x00000000
-#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00
-#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000
-
-/* GPOSTAT register */
-#define IFX_SSC_GPOSTAT_OUT0 0x00000001
-#define IFX_SSC_GPOSTAT_OUT1 0x00000002
-#define IFX_SSC_GPOSTAT_OUT2 0x00000004
-#define IFX_SSC_GPOSTAT_OUT3 0x00000008
-#define IFX_SSC_GPOSTAT_OUT4 0x00000010
-#define IFX_SSC_GPOSTAT_OUT5 0x00000020
-#define IFX_SSC_GPOSTAT_OUT6 0x00000040
-#define IFX_SSC_GPOSTAT_OUT7 0x00000080
-#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF
-
-/* WHBGPOSTAT register */
-#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001
-#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002
-#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004
-#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008
-#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010
-#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020
-#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040
-#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF
-
-#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0
-#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1
-#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2
-#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3
-#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4
-#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5
-#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6
-#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7
-
-#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8
-#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100
-#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9
-#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200
-#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10
-#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400
-#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11
-#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800
-#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12
-#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000
-#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13
-#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000
-#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14
-#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000
-#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15
-#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000
-#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00
-
-/* SFCON register */
-#define IFX_SSC_SFCON_SF_ENABLE 0x00000001
-#define IFX_SSC_SFCON_SF_DISABLE 0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004
-#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008
-#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000
-#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0
-#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4
-#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000
-#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16
-#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000
-#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000
-#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18
-#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000
-#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000
-#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22
-#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024
-
-#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK)
-#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
-
-/* SFSTAT register */
-#define IFX_SSC_SFSTAT_IN_DATA 0x00000001
-#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002
-#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0
-#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20
-
-#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET)
-#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET)
-
-/* RXREQ register */
-#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF
-#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0
-
-/* RXCNT register */
-#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF
-#define IFX_SSC_RXCNT_TODO_OFFSET 0
-
-/* DMACON register */
-#define IFX_SSC_DMACON_RXON 0x00000001
-#define IFX_SSC_DMACON_RXOFF 0x00000000
-#define IFX_SSC_DMACON_TXON 0x00000002
-#define IFX_SSC_DMACON_TXOFF 0x00000000
-#define IFX_SSC_DMACON_DMAON 0x00000003
-#define IFX_SSC_DMACON_DMAOFF 0x00000000
-#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C
-#define IFX_SSC_DMACON_CLASS_OFFSET 2
-
-/* register access macros */
-#define ifx_ssc_fstat_received_words(status) (status & 0x003F)
-#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8)
-
-#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE))
-#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE))
-#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB))
-#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB))
-#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT))
-#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR))
-
-#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET)
-#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
-
-#endif
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_H__
-#define _IFXMIPS_H__
-
-#define ifxmips_r32(reg) __raw_readl(reg)
-#define ifxmips_w32(val, reg) __raw_writel(val, reg)
-#define ifxmips_w32_mask(clear, set, reg) ifxmips_w32((ifxmips_r32(reg) & ~clear) | set, reg)
-
-/*------------ GENERAL */
-
-#define BOARD_SYSTEM_TYPE "IFXMIPS"
-
-#define IOPORT_RESOURCE_START 0x10000000
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
-
-#define IFXMIPS_FLASH_START 0x10000000
-#define IFXMIPS_FLASH_MAX 0x02000000
-
-/*------------ ASC0/1 */
-
-#define IFXMIPS_ASC_BASE_ADDR (KSEG1 + 0x1E100400)
-#define IFXMIPS_ASC_BASE_DIFF (0x1E100C00 - 0x1E100400)
-
-#define IFXMIPS_ASC_FSTAT 0x0048
-#define IFXMIPS_ASC_TBUF 0x0020
-#define IFXMIPS_ASC_WHBSTATE 0x0018
-#define IFXMIPS_ASC_RBUF 0x0024
-#define IFXMIPS_ASC_STATE 0x0014
-#define IFXMIPS_ASC_IRNCR 0x00F8
-#define IFXMIPS_ASC_CLC 0x0000
-#define IFXMIPS_ASC_PISEL 0x0004
-#define IFXMIPS_ASC_TXFCON 0x0044
-#define IFXMIPS_ASC_RXFCON 0x0040
-#define IFXMIPS_ASC_CON 0x0010
-#define IFXMIPS_ASC_BG 0x0050
-#define IFXMIPS_ASC_IRNREN 0x00F4
-
-#define IFXMIPS_ASC_CLC_DISS 0x2
-#define ASC_IRNREN_RX_BUF 0x8
-#define ASC_IRNREN_TX_BUF 0x4
-#define ASC_IRNREN_ERR 0x2
-#define ASC_IRNREN_TX 0x1
-#define ASC_IRNCR_TIR 0x4
-#define ASC_IRNCR_RIR 0x2
-#define ASC_IRNCR_EIR 0x4
-#define ASCOPT_CSIZE 0x3
-#define ASCOPT_CS7 0x1
-#define ASCOPT_CS8 0x2
-#define ASCOPT_PARENB 0x4
-#define ASCOPT_STOPB 0x8
-#define ASCOPT_PARODD 0x0
-#define ASCOPT_CREAD 0x20
-#define TXFIFO_FL 1
-#define RXFIFO_FL 1
-#define TXFIFO_FULL 16
-#define ASCCLC_RMCMASK 0x0000FF00
-#define ASCCLC_RMCOFFSET 8
-#define ASCCON_M_8ASYNC 0x0
-#define ASCCON_M_7ASYNC 0x2
-#define ASCCON_ODD 0x00000020
-#define ASCCON_STP 0x00000080
-#define ASCCON_BRS 0x00000100
-#define ASCCON_FDE 0x00000200
-#define ASCCON_R 0x00008000
-#define ASCCON_FEN 0x00020000
-#define ASCCON_ROEN 0x00080000
-#define ASCCON_TOEN 0x00100000
-#define ASCSTATE_PE 0x00010000
-#define ASCSTATE_FE 0x00020000
-#define ASCSTATE_ROE 0x00080000
-#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
-#define ASCWHBSTATE_CLRREN 0x00000001
-#define ASCWHBSTATE_SETREN 0x00000002
-#define ASCWHBSTATE_CLRPE 0x00000004
-#define ASCWHBSTATE_CLRFE 0x00000008
-#define ASCWHBSTATE_CLRROE 0x00000020
-#define ASCTXFCON_TXFEN 0x0001
-#define ASCTXFCON_TXFFLU 0x0002
-#define ASCTXFCON_TXFITLMASK 0x3F00
-#define ASCTXFCON_TXFITLOFF 8
-#define ASCRXFCON_RXFEN 0x0001
-#define ASCRXFCON_RXFFLU 0x0002
-#define ASCRXFCON_RXFITLMASK 0x3F00
-#define ASCRXFCON_RXFITLOFF 8
-#define ASCFSTAT_RXFFLMASK 0x003F
-#define ASCFSTAT_TXFFLMASK 0x3F00
-#define ASCFSTAT_TXFFLOFF 8
-
-
-
-/*------------ RCU */
-#define IFXMIPS_RCU_BASE_ADDR 0xBF203000
-
-/* reset request */
-#define IFXMIPS_RCU_RST ((u32 *)(IFXMIPS_RCU_BASE_ADDR + 0x0010))
-#define IFXMIPS_RCU_RST_CPU1 (1 << 3)
-#define IFXMIPS_RCU_RST_ALL 0x40000000
-
-#define IFXMIPS_RCU_RST_REQ_DFE (1 << 7)
-#define IFXMIPS_RCU_RST_REQ_AFE (1 << 11)
-#define IFXMIPS_RCU_RST_REQ_ARC_JTAG (1 << 20)
-
-
-/*------------ GPTU */
-
-#define IFXMIPS_GPTU_BASE_ADDR 0xB8000300
-
-/* clock control register */
-#define IFXMIPS_GPTU_GPT_CLC ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0000))
-
-/* captur reload register */
-#define IFXMIPS_GPTU_GPT_CAPREL ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0030))
-
-/* timer 6 control register */
-#define IFXMIPS_GPTU_GPT_T6CON ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0020))
-
-
-/*------------ EBU */
-
-#define IFXMIPS_EBU_BASE_ADDR 0xBE105300
-
-/* bus configuration register */
-#define IFXMIPS_EBU_BUSCON0 ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0060))
-#define IFXMIPS_EBU_PCC_CON ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0090))
-#define IFXMIPS_EBU_PCC_IEN ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A4))
-#define IFXMIPS_EBU_PCC_ISTAT ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A0))
-
-
-/*------------ CGU */
-#define IFXMIPS_CGU_BASE_ADDR (KSEG1 + 0x1F103000)
-#define IFXMIPS_CGU_PLL0_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0004))
-#define IFXMIPS_CGU_PLL1_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0008))
-#define IFXMIPS_CGU_PLL2_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x000C))
-#define IFXMIPS_CGU_SYS ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010))
-#define IFXMIPS_CGU_UPDATE ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0014))
-#define IFXMIPS_CGU_IF_CLK ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018))
-#define IFXMIPS_CGU_OSC_CON ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x001C))
-#define IFXMIPS_CGU_SMD ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0020))
-#define IFXMIPS_CGU_CT1SR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0028))
-#define IFXMIPS_CGU_CT2SR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x002C))
-#define IFXMIPS_CGU_PCMCR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0030))
-#define IFXMIPS_CGU_PCI_CR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034))
-#define IFXMIPS_CGU_PD_PC ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0038))
-#define IFXMIPS_CGU_FMR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x003C))
-
-/* clock mux */
-#define IFXMIPS_CGU_SYS ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010))
-#define IFXMIPS_CGU_IFCCR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018))
-#define IFXMIPS_CGU_PCICR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034))
-
-#define CLOCK_60M 60000000
-#define CLOCK_83M 83333333
-#define CLOCK_111M 111111111
-#define CLOCK_133M 133333333
-#define CLOCK_167M 166666667
-#define CLOCK_333M 333333333
-
-
-/*------------ CGU */
-
-#define IFXMIPS_PMU_BASE_ADDR (KSEG1 + 0x1F102000)
-
-#define IFXMIPS_PMU_PWDCR ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x001C))
-#define IFXMIPS_PMU_PWDSR ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x0020))
-
-
-/*------------ ICU */
-
-#define IFXMIPS_ICU_BASE_ADDR 0xBF880200
-
-
-#define IFXMIPS_ICU_IM0_ISR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0000))
-#define IFXMIPS_ICU_IM0_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0008))
-#define IFXMIPS_ICU_IM0_IOSR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0010))
-#define IFXMIPS_ICU_IM0_IRSR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0018))
-#define IFXMIPS_ICU_IM0_IMR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0020))
-
-#define IFXMIPS_ICU_IM1_ISR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0028))
-#define IFXMIPS_ICU_IM2_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0058))
-#define IFXMIPS_ICU_IM3_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0080))
-#define IFXMIPS_ICU_IM4_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00A8))
-#define IFXMIPS_ICU_IM5_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00D0))
-
-#define IFXMIPS_ICU_OFFSET (IFXMIPS_ICU_IM1_ISR - IFXMIPS_ICU_IM0_ISR)
-
-
-/*------------ ETOP */
-
-#define IFXMIPS_PPE32_BASE_ADDR 0xBE180000
-
-#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600
-
-#define IFXMIPS_PPE32_MEM_MAP ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10000))
-#define IFXMIPS_PPE32_SRST ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10080))
-
-#define MII_MODE 1
-#define REV_MII_MODE 2
-
-/* mdio access */
-#define IFXMIPS_PPE32_MDIO_CFG ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11800))
-#define IFXMIPS_PPE32_MDIO_ACC ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11804))
-
-#define MDIO_ACC_REQUEST 0x80000000
-#define MDIO_ACC_READ 0x40000000
-#define MDIO_ACC_ADDR_MASK 0x1f
-#define MDIO_ACC_ADDR_OFFSET 0x15
-#define MDIO_ACC_REG_MASK 0xff
-#define MDIO_ACC_REG_OFFSET 0x10
-#define MDIO_ACC_VAL_MASK 0xffff
-
-/* configuration */
-#define IFXMIPS_PPE32_CFG ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1808))
-
-#define PPE32_MII_MASK 0xfffffffc
-#define PPE32_MII_NORMAL 0x8
-#define PPE32_MII_REVERSE 0xe
-
-/* packet length */
-#define IFXMIPS_PPE32_IG_PLEN_CTRL ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1820))
-
-#define PPE32_PLEN_OVER 0x5ee
-#define PPE32_PLEN_UNDER 0x400000
-
-/* enet */
-#define IFXMIPS_PPE32_ENET_MAC_CFG ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1840))
-
-#define PPE32_CGEN 0x800
-
-
-/*------------ DMA */
-#define IFXMIPS_DMA_BASE_ADDR 0xBE104100
-
-#define IFXMIPS_DMA_CS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x18))
-#define IFXMIPS_DMA_CIE ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x2C))
-#define IFXMIPS_DMA_IRNEN ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0xf4))
-#define IFXMIPS_DMA_CCTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x1C))
-#define IFXMIPS_DMA_CIS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x28))
-#define IFXMIPS_DMA_CDLEN ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x24))
-#define IFXMIPS_DMA_PS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x40))
-#define IFXMIPS_DMA_PCTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x44))
-#define IFXMIPS_DMA_CTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x10))
-#define IFXMIPS_DMA_CPOLL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x14))
-#define IFXMIPS_DMA_CDBA ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x20))
-
-
-/*------------ PCI */
-#define PCI_CR_PR_BASE_ADDR (KSEG1 + 0x1E105400)
-
-#define PCI_CR_FCI_ADDR_MAP0 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C0))
-#define PCI_CR_FCI_ADDR_MAP1 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C4))
-#define PCI_CR_FCI_ADDR_MAP2 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C8))
-#define PCI_CR_FCI_ADDR_MAP3 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00CC))
-#define PCI_CR_FCI_ADDR_MAP4 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D0))
-#define PCI_CR_FCI_ADDR_MAP5 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D4))
-#define PCI_CR_FCI_ADDR_MAP6 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D8))
-#define PCI_CR_FCI_ADDR_MAP7 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00DC))
-#define PCI_CR_CLK_CTRL ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0000))
-#define PCI_CR_PCI_MOD ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0030))
-#define PCI_CR_PC_ARB ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0080))
-#define PCI_CR_FCI_ADDR_MAP11hg ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E4))
-#define PCI_CR_BAR11MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0044))
-#define PCI_CR_BAR12MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0048))
-#define PCI_CR_BAR13MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x004C))
-#define PCI_CS_BASE_ADDR1 ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0010))
-#define PCI_CR_PCI_ADDR_MAP11 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0064))
-#define PCI_CR_FCI_BURST_LENGTH ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E8))
-#define PCI_CR_PCI_EOI ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x002C))
-
-#define PCI_CS_PR_BASE_ADDR (KSEG1 + 0x17000000)
-
-#define PCI_CS_STS_CMD ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0004))
-
-#define PCI_MASTER0_REQ_MASK_2BITS 8
-#define PCI_MASTER1_REQ_MASK_2BITS 10
-#define PCI_MASTER2_REQ_MASK_2BITS 12
-#define INTERNAL_ARB_ENABLE_BIT 0
-
-
-/*------------ WDT */
-
-#define IFXMIPS_WDT_BASE_ADDR (KSEG1 + 0x1F880000)
-
-#define IFXMIPS_BIU_WDT_CR ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F0))
-#define IFXMIPS_BIU_WDT_SR ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F8))
-
-
-/*------------ LED */
-
-#define IFXMIPS_LED_BASE_ADDR (KSEG1 + 0x1E100BB0)
-#define IFXMIPS_LED_CON0 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0000))
-#define IFXMIPS_LED_CON1 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0004))
-#define IFXMIPS_LED_CPU0 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0008))
-#define IFXMIPS_LED_CPU1 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x000C))
-#define IFXMIPS_LED_AR ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0010))
-
-#define LED_CON0_SWU (1 << 31)
-#define LED_CON0_AD1 (1 << 25)
-#define LED_CON0_AD0 (1 << 24)
-
-#define IFXMIPS_LED_2HZ (0)
-#define IFXMIPS_LED_4HZ (1 << 23)
-#define IFXMIPS_LED_8HZ (2 << 23)
-#define IFXMIPS_LED_10HZ (3 << 23)
-#define IFXMIPS_LED_MASK (0xf << 23)
-
-#define IFXMIPS_LED_UPD_SRC_FPI (1 << 31)
-#define IFXMIPS_LED_UPD_MASK (3 << 30)
-#define IFXMIPS_LED_ADSL_SRC (3 << 24)
-
-#define IFXMIPS_LED_GROUP0 (1 << 0)
-#define IFXMIPS_LED_GROUP1 (1 << 1)
-#define IFXMIPS_LED_GROUP2 (1 << 2)
-
-#define IFXMIPS_LED_RISING 0
-#define IFXMIPS_LED_FALLING (1 << 26)
-#define IFXMIPS_LED_EDGE_MASK (1 << 26)
-
-
-/*------------ GPIO */
-
-#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00)
-
-#define IFXMIPS_GPIO_P0_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010))
-#define IFXMIPS_GPIO_P1_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040))
-#define IFXMIPS_GPIO_P0_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014))
-#define IFXMIPS_GPIO_P1_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044))
-#define IFXMIPS_GPIO_P0_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018))
-#define IFXMIPS_GPIO_P1_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048))
-#define IFXMIPS_GPIO_P0_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C))
-#define IFXMIPS_GPIO_P1_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C))
-#define IFXMIPS_GPIO_P0_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020))
-#define IFXMIPS_GPIO_P1_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050))
-#define IFXMIPS_GPIO_P0_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024))
-#define IFXMIPS_GPIO_P1_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054))
-#define IFXMIPS_GPIO_P0_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028))
-#define IFXMIPS_GPIO_P1_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058))
-#define IFXMIPS_GPIO_P0_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C))
-#define IFXMIPS_GPIO_P1_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C))
-#define IFXMIPS_GPIO_P0_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030))
-#define IFXMIPS_GPIO_P1_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060))
-
-
-/*------------ SSC */
-
-#define IFXMIPS_SSC_BASE_ADDR (KSEG1 + 0x1e100800)
-
-
-#define IFXMIPS_SSC_CLC ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0000))
-#define IFXMIPS_SSC_IRN ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x00F4))
-#define IFXMIPS_SSC_SFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0060))
-#define IFXMIPS_SSC_WHBGPOSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0078))
-#define IFXMIPS_SSC_STATE ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0014))
-#define IFXMIPS_SSC_WHBSTATE ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0018))
-#define IFXMIPS_SSC_FSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0038))
-#define IFXMIPS_SSC_ID ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0008))
-#define IFXMIPS_SSC_TB ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0020))
-#define IFXMIPS_SSC_RXFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0030))
-#define IFXMIPS_SSC_TXFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0034))
-#define IFXMIPS_SSC_CON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0010))
-#define IFXMIPS_SSC_GPOSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0074))
-#define IFXMIPS_SSC_RB ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0024))
-#define IFXMIPS_SSC_RXCNT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084))
-#define IFXMIPS_SSC_GPOCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0070))
-#define IFXMIPS_SSC_BR ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0040))
-#define IFXMIPS_SSC_RXREQ ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0080))
-#define IFXMIPS_SSC_SFSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0064))
-#define IFXMIPS_SSC_RXCNT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084))
-
-
-/*------------ MEI */
-
-#define IFXMIPS_MEI_BASE_ADDR (KSEG1 + 0x1E116000)
-
-#define MEI_DATA_XFR ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0000))
-#define MEI_VERSION ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0004))
-#define MEI_ARC_GP_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0008))
-#define MEI_DATA_XFR_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x000C))
-#define MEI_XFR_ADDR ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0010))
-#define MEI_MAX_WAIT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0014))
-#define MEI_TO_ARC_INT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0018))
-#define ARC_TO_MEI_INT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x001C))
-#define ARC_TO_MEI_INT_MASK ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0020))
-#define MEI_DEBUG_WAD ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0024))
-#define MEI_DEBUG_RAD ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0028))
-#define MEI_DEBUG_DATA ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x002C))
-#define MEI_DEBUG_DEC ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0030))
-#define MEI_CONFIG ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0034))
-#define MEI_RST_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0038))
-#define MEI_DBG_MASTER ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x003C))
-#define MEI_CLK_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0040))
-#define MEI_BIST_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0044))
-#define MEI_BIST_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0048))
-#define MEI_XDATA_BASE_SH ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x004c))
-#define MEI_XDATA_BASE ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0050))
-#define MEI_XMEM_BAR_BASE ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054))
-#define MEI_XMEM_BAR0 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054))
-#define MEI_XMEM_BAR1 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0058))
-#define MEI_XMEM_BAR2 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x005C))
-#define MEI_XMEM_BAR3 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0060))
-#define MEI_XMEM_BAR4 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0064))
-#define MEI_XMEM_BAR5 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0068))
-#define MEI_XMEM_BAR6 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x006C))
-#define MEI_XMEM_BAR7 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0070))
-#define MEI_XMEM_BAR8 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0074))
-#define MEI_XMEM_BAR9 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0078))
-#define MEI_XMEM_BAR10 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x007C))
-#define MEI_XMEM_BAR11 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0080))
-#define MEI_XMEM_BAR12 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0084))
-#define MEI_XMEM_BAR13 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0088))
-#define MEI_XMEM_BAR14 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x008C))
-#define MEI_XMEM_BAR15 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0090))
-#define MEI_XMEM_BAR16 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0094))
-
-
-/*------------ DEU */
-
-#define IFXMIPS_DEU_BASE (KSEG1 + 0x1E103100)
-#define IFXMIPS_DEU_CLK ((u32 *)(IFXMIPS_DEU_BASE + 0x0000))
-#define IFXMIPS_DEU_ID ((u32 *)(IFXMIPS_DEU_BASE + 0x0008))
-
-#define IFXMIPS_DES_CON ((u32 *)(IFXMIPS_DEU_BASE + 0x0010))
-#define IFXMIPS_DES_IHR ((u32 *)(IFXMIPS_DEU_BASE + 0x0014))
-#define IFXMIPS_DES_ILR ((u32 *)(IFXMIPS_DEU_BASE + 0x0018))
-#define IFXMIPS_DES_K1HR ((u32 *)(IFXMIPS_DEU_BASE + 0x001C))
-#define IFXMIPS_DES_K1LR ((u32 *)(IFXMIPS_DEU_BASE + 0x0020))
-#define IFXMIPS_DES_K3HR ((u32 *)(IFXMIPS_DEU_BASE + 0x0024))
-#define IFXMIPS_DES_K3LR ((u32 *)(IFXMIPS_DEU_BASE + 0x0028))
-#define IFXMIPS_DES_IVHR ((u32 *)(IFXMIPS_DEU_BASE + 0x002C))
-#define IFXMIPS_DES_IVLR ((u32 *)(IFXMIPS_DEU_BASE + 0x0030))
-#define IFXMIPS_DES_OHR ((u32 *)(IFXMIPS_DEU_BASE + 0x0040))
-#define IFXMIPS_DES_OLR ((u32 *)(IFXMIPS_DEU_BASE + 0x0050))
-#define IFXMIPS_AES_CON ((u32 *)(IFXMIPS_DEU_BASE + 0x0050))
-#define IFXMIPS_AES_ID3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0054))
-#define IFXMIPS_AES_ID2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0058))
-#define IFXMIPS_AES_ID1R ((u32 *)(IFXMIPS_DEU_BASE + 0x005C))
-#define IFXMIPS_AES_ID0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0060))
-#define IFXMIPS_AES_K7R ((u32 *)(IFXMIPS_DEU_BASE + 0x0064))
-#define IFXMIPS_AES_K6R ((u32 *)(IFXMIPS_DEU_BASE + 0x0068))
-#define IFXMIPS_AES_K5R ((u32 *)(IFXMIPS_DEU_BASE + 0x006C))
-#define IFXMIPS_AES_K4R ((u32 *)(IFXMIPS_DEU_BASE + 0x0070))
-#define IFXMIPS_AES_K3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0074))
-#define IFXMIPS_AES_K2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0078))
-#define IFXMIPS_AES_K1R ((u32 *)(IFXMIPS_DEU_BASE + 0x007C))
-#define IFXMIPS_AES_K0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0080))
-#define IFXMIPS_AES_IV3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0084))
-#define IFXMIPS_AES_IV2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0088))
-#define IFXMIPS_AES_IV1R ((u32 *)(IFXMIPS_DEU_BASE + 0x008C))
-#define IFXMIPS_AES_IV0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0090))
-#define IFXMIPS_AES_0D3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0094))
-#define IFXMIPS_AES_0D2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0098))
-#define IFXMIPS_AES_OD1R ((u32 *)(IFXMIPS_DEU_BASE + 0x009C))
-#define IFXMIPS_AES_OD0R ((u32 *)(IFXMIPS_DEU_BASE + 0x00A0))
-
-/*------------ FUSE */
-
-#define IFXMIPS_FUSE_BASE_ADDR (KSEG1 + 0x1F107354)
-
-
-/*------------ MPS */
-
-#define IFXMIPS_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
-#define IFXMIPS_MPS_SRAM ((u32 *)(KSEG1 + 0x1F200000))
-
-#define IFXMIPS_MPS_CHIPID ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0344))
-#define IFXMIPS_MPS_VC0ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0000))
-#define IFXMIPS_MPS_VC1ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0004))
-#define IFXMIPS_MPS_VC2ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0008))
-#define IFXMIPS_MPS_VC3ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x000C))
-#define IFXMIPS_MPS_RVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0010))
-#define IFXMIPS_MPS_RVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0014))
-#define IFXMIPS_MPS_RVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0018))
-#define IFXMIPS_MPS_RVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x001C))
-#define IFXMIPS_MPS_SVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0020))
-#define IFXMIPS_MPS_SVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0024))
-#define IFXMIPS_MPS_SVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0028))
-#define IFXMIPS_MPS_SVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x002C))
-#define IFXMIPS_MPS_CVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0030))
-#define IFXMIPS_MPS_CVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0034))
-#define IFXMIPS_MPS_CVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0038))
-#define IFXMIPS_MPS_CVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x003C))
-#define IFXMIPS_MPS_RAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0040))
-#define IFXMIPS_MPS_RAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0044))
-#define IFXMIPS_MPS_SAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0048))
-#define IFXMIPS_MPS_SAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x004C))
-#define IFXMIPS_MPS_CAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0050))
-#define IFXMIPS_MPS_CAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0054))
-#define IFXMIPS_MPS_AD0ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0058))
-#define IFXMIPS_MPS_AD1ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x005C))
-
-#define IFXMIPS_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
-#define IFXMIPS_MPS_CHIPID_VERSION_SET(value) ((((1 << 4) - 1) & (value)) << 28)
-#define IFXMIPS_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1))
-#define IFXMIPS_MPS_CHIPID_PARTNUM_SET(value) ((((1 << 16) - 1) & (value)) << 12)
-#define IFXMIPS_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1))
-#define IFXMIPS_MPS_CHIPID_MANID_SET(value) ((((1 << 10) - 1) & (value)) << 1)
-
-#endif
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_CGU_H__
-#define _IFXMIPS_CGU_H__
-
-unsigned int cgu_get_mips_clock(int cpu);
-unsigned int cgu_get_io_region_clock(void);
-unsigned int cgu_get_fpi_bus_clock(int fpi);
-void cgu_setup_pci_clk(int internal_clock);
-unsigned int ifxmips_get_ddr_hz(void);
-unsigned int ifxmips_get_fpi_hz(void);
-unsigned int ifxmips_get_cpu_hz(void);
-
-#endif
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-#ifndef _IFXMIPS_DMA_H__
-#define _IFXMIPS_DMA_H__
-
-#define RCV_INT 1
-#define TX_BUF_FULL_INT 2
-#define TRANSMIT_CPT_INT 4
-#define IFXMIPS_DMA_CH_ON 1
-#define IFXMIPS_DMA_CH_OFF 0
-#define IFXMIPS_DMA_CH_DEFAULT_WEIGHT 100
-
-enum attr_t{
- TX = 0,
- RX = 1,
- RESERVED = 2,
- DEFAULT = 3,
-};
-
-#define DMA_OWN 1
-#define CPU_OWN 0
-#define DMA_MAJOR 250
-
-#define DMA_DESC_OWN_CPU 0x0
-#define DMA_DESC_OWN_DMA 0x80000000
-#define DMA_DESC_CPT_SET 0x40000000
-#define DMA_DESC_SOP_SET 0x20000000
-#define DMA_DESC_EOP_SET 0x10000000
-
-#define MISCFG_MASK 0x40
-#define RDERR_MASK 0x20
-#define CHOFF_MASK 0x10
-#define DESCPT_MASK 0x8
-#define DUR_MASK 0x4
-#define EOP_MASK 0x2
-
-#define DMA_DROP_MASK (1<<31)
-
-#define IFXMIPS_DMA_RX -1
-#define IFXMIPS_DMA_TX 1
-
-struct dma_chan_map {
- const char *dev_name;
- enum attr_t dir;
- int pri;
- int irq;
- int rel_chan_no;
-};
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-struct rx_desc {
- u32 data_length:16;
- volatile u32 reserved:7;
- volatile u32 byte_offset:2;
- volatile u32 Burst_length_offset:3;
- volatile u32 EoP:1;
- volatile u32 Res:1;
- volatile u32 C:1;
- volatile u32 OWN:1;
- volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
-};
-
-struct tx_desc {
- volatile u32 data_length:16;
- volatile u32 reserved1:7;
- volatile u32 byte_offset:5;
- volatile u32 EoP:1;
- volatile u32 SoP:1;
- volatile u32 C:1;
- volatile u32 OWN:1;
- volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
-};
-#else /* BIG */
-struct rx_desc {
- union {
- struct {
- volatile u32 OWN:1;
- volatile u32 C:1;
- volatile u32 SoP:1;
- volatile u32 EoP:1;
- volatile u32 Burst_length_offset:3;
- volatile u32 byte_offset:2;
- volatile u32 reserve:7;
- volatile u32 data_length:16;
- } field;
- volatile u32 word;
- } status;
- volatile u32 Data_Pointer;
-};
-
-struct tx_desc {
- union {
- struct {
- volatile u32 OWN:1;
- volatile u32 C:1;
- volatile u32 SoP:1;
- volatile u32 EoP:1;
- volatile u32 byte_offset:5;
- volatile u32 reserved:7;
- volatile u32 data_length:16;
- } field;
- volatile u32 word;
- } status;
- volatile u32 Data_Pointer;
-};
-#endif /* ENDIAN */
-
-struct dma_channel_info {
- /* relative channel number */
- int rel_chan_no;
- /* class for this channel for QoS */
- int pri;
- /* specify byte_offset */
- int byte_offset;
- /* direction */
- int dir;
- /* irq number */
- int irq;
- /* descriptor parameter */
- int desc_base;
- int desc_len;
- int curr_desc;
- int prev_desc; /* only used if it is a tx channel*/
- /* weight setting for WFQ algorithm*/
- int weight;
- int default_weight;
- int packet_size;
- int burst_len;
- /* on or off of this channel */
- int control;
- /* optional information for the upper layer devices */
-#if defined(CONFIG_IFXMIPS_ETHERNET_D2) || defined(CONFIG_IFXMIPS_PPA)
- void *opt[64];
-#else
- void *opt[25];
-#endif
- /* Pointer to the peripheral device who is using this channel */
- void *dma_dev;
- /* channel operations */
- void (*open)(struct dma_channel_info *pCh);
- void (*close)(struct dma_channel_info *pCh);
- void (*reset)(struct dma_channel_info *pCh);
- void (*enable_irq)(struct dma_channel_info *pCh);
- void (*disable_irq)(struct dma_channel_info *pCh);
-};
-
-struct dma_device_info {
- /* device name of this peripheral */
- char device_name[15];
- int reserved;
- int tx_burst_len;
- int rx_burst_len;
- int default_weight;
- int current_tx_chan;
- int current_rx_chan;
- int num_tx_chan;
- int num_rx_chan;
- int max_rx_chan_num;
- int max_tx_chan_num;
- struct dma_channel_info *tx_chan[20];
- struct dma_channel_info *rx_chan[20];
- /*functions, optional*/
- u8 *(*buffer_alloc)(int len, int *offset, void **opt);
- void (*buffer_free)(u8 *dataptr, void *opt);
- int (*intr_handler)(struct dma_device_info *info, int status);
- void *priv; /* used by peripheral driver only */
-};
-
-struct dma_device_info *dma_device_reserve(char *dev_name);
-void dma_device_release(struct dma_device_info *dev);
-void dma_device_register(struct dma_device_info *info);
-void dma_device_unregister(struct dma_device_info *info);
-int dma_device_read(struct dma_device_info *info, u8 **dataptr, void **opt);
-int dma_device_write(struct dma_device_info *info, u8 *dataptr, int len,
- void *opt);
-
-#endif
-
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_EBU_H__
-#define _IFXMIPS_EBU_H__
-
-extern spinlock_t ebu_lock;
-
-#endif
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_GPIO_H__
-#define _IFXMIPS_GPIO_H__
-
-extern int ifxmips_port_reserve_pin(unsigned int port, unsigned int pin);
-extern int ifxmips_port_free_pin(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_open_drain(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_open_drain(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_pudsel(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_pudsel(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_puden(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_puden(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_stoff(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_stoff(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_dir_out(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_dir_in(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_output(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_output(unsigned int port, unsigned int pin);
-extern int ifxmips_port_get_input(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_altsel0(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_altsel0(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_altsel1(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_altsel1(unsigned int port, unsigned int pin);
-
-#endif
+++ /dev/null
-#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-
-
-/******************************************************************************
- Copyright (c) 2002, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
-******************************************************************************/
-
-
-/*
- * ####################################
- * Definition
- * ####################################
- */
-
-/*
- * Available Timer/Counter Index
- */
-#define TIMER(n, X) (n * 2 + (X ? 1 : 0))
-#define TIMER_ANY 0x00
-#define TIMER1A TIMER(1, 0)
-#define TIMER1B TIMER(1, 1)
-#define TIMER2A TIMER(2, 0)
-#define TIMER2B TIMER(2, 1)
-#define TIMER3A TIMER(3, 0)
-#define TIMER3B TIMER(3, 1)
-
-/*
- * Flag of Timer/Counter
- * These flags specify the way in which timer is configured.
- */
-/* Bit size of timer/counter. */
-#define TIMER_FLAG_16BIT 0x0000
-#define TIMER_FLAG_32BIT 0x0001
-/* Switch between timer and counter. */
-#define TIMER_FLAG_TIMER 0x0000
-#define TIMER_FLAG_COUNTER 0x0002
-/* Stop or continue when overflowing/underflowing. */
-#define TIMER_FLAG_ONCE 0x0000
-#define TIMER_FLAG_CYCLIC 0x0004
-/* Count up or counter down. */
-#define TIMER_FLAG_UP 0x0000
-#define TIMER_FLAG_DOWN 0x0008
-/* Count on specific level or edge. */
-#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
-#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040
-#define TIMER_FLAG_RISE_EDGE 0x0010
-#define TIMER_FLAG_FALL_EDGE 0x0020
-#define TIMER_FLAG_ANY_EDGE 0x0030
-/* Signal is syncronous to module clock or not. */
-#define TIMER_FLAG_UNSYNC 0x0000
-#define TIMER_FLAG_SYNC 0x0080
-/* Different interrupt handle type. */
-#define TIMER_FLAG_NO_HANDLE 0x0000
-#if defined(__KERNEL__)
- #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100
-#endif // defined(__KERNEL__)
-#define TIMER_FLAG_SIGNAL 0x0300
-/* Internal clock source or external clock source */
-#define TIMER_FLAG_INT_SRC 0x0000
-#define TIMER_FLAG_EXT_SRC 0x1000
-
-
-/*
- * ioctl Command
- */
-#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */
-#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */
-#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */
-#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */
-#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */
-#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/
-#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */
-#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */
-
-/*
- * Data Type Used to Call ioctl
- */
-struct gptu_ioctl_param {
- unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
- * GPTU_SET_COUNTER, this field is ID of expected *
- * timer/counter. If it's zero, a timer/counter would *
- * be dynamically allocated and ID would be stored in *
- * this field. *
- * In command GPTU_GET_COUNT_VALUE, this field is *
- * ignored. *
- * In other command, this field is ID of timer/counter *
- * allocated. */
- unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
- * GPTU_SET_COUNTER, this field contains flags to *
- * specify how to configure timer/counter. *
- * In command GPTU_START_TIMER, zero indicate start *
- * and non-zero indicate resume timer/counter. *
- * In other command, this field is ignored. */
- unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains *
- * init/reload value. *
- * In command GPTU_SET_TIMER, this field contains *
- * frequency (0.001Hz) of timer. *
- * In command GPTU_GET_COUNT_VALUE, current count *
- * value would be stored in this field. *
- * In command GPTU_CALCULATE_DIVIDER, this field *
- * contains frequency wanted, and after calculation, *
- * divider would be stored in this field to overwrite *
- * the frequency. *
- * In other command, this field is ignored. */
- int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
- * if signal is required, this field contains process *
- * ID to which signal would be sent. *
- * In other command, this field is ignored. */
- int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
- * if signal is required, this field contains signal *
- * number which would be sent. *
- * In other command, this field is ignored. */
-};
-
-/*
- * ####################################
- * Data Type
- * ####################################
- */
-typedef void (*timer_callback)(unsigned long arg);
-
-extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
-extern int ifxmips_free_timer(unsigned int);
-extern int ifxmips_start_timer(unsigned int, int);
-extern int ifxmips_stop_timer(unsigned int);
-extern int ifxmips_reset_counter_flags(u32 timer, u32 flags);
-extern int ifxmips_get_count_value(unsigned int, unsigned long *);
-extern u32 ifxmips_cal_divider(unsigned long);
-extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
-extern int ifxmips_set_counter(unsigned int timer, unsigned int flag,
- u32 reload, unsigned long arg1, unsigned long arg2);
-
-#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_IRQ__
-#define _IFXMIPS_IRQ__
-
-#define INT_NUM_IRQ0 8
-#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
-#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
-#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
-#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
-#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
-#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
-
-#define IFXMIPSASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 7))
-#define IFXMIPSASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 2)
-#define IFXMIPSASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 3)
-
-#define IFXMIPS_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
-#define IFXMIPS_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
-#define IFXMIPS_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
-
-#define IFXMIPS_MEI_INT (INT_NUM_IM1_IRL0 + 23)
-
-#define IFXMIPS_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
-#define IFXMIPS_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
-
-#define MIPS_CPU_TIMER_IRQ 7
-
-#define IFXMIPS_DMA_CH0_INT (INT_NUM_IM2_IRL0)
-#define IFXMIPS_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
-#define IFXMIPS_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
-#define IFXMIPS_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
-#define IFXMIPS_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
-#define IFXMIPS_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
-#define IFXMIPS_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
-#define IFXMIPS_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
-#define IFXMIPS_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
-#define IFXMIPS_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
-#define IFXMIPS_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
-#define IFXMIPS_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
-#define IFXMIPS_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
-#define IFXMIPS_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
-#define IFXMIPS_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
-#define IFXMIPS_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
-#define IFXMIPS_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
-#define IFXMIPS_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
-#define IFXMIPS_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
-#define IFXMIPS_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
-
-#define IFXMIPS_USB_INT (INT_NUM_IM4_IRL0 + 22)
-#define IFXMIPS_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
-
-
-extern void ifxmips_mask_and_ack_irq(unsigned int irq_nr);
-
-#endif
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_LED_H__
-#define _IFXMIPS_LED_H__
-
-extern void ifxmips_led_set(unsigned int led);
-extern void ifxmips_led_clear(unsigned int led);
-extern void ifxmips_led_blink_set(unsigned int led);
-extern void ifxmips_led_blink_clear(unsigned int led);
-
-#endif
+++ /dev/null
-/******************************************************************************
-**
-** FILE NAME : danube_mei.h
-** PROJECT : Danube
-** MODULES : MEI
-**
-** DATE : 1 Jan 2006
-** AUTHOR : TC Chen
-** DESCRIPTION : MEI Driver
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Version $Date $Author $Comment
-*******************************************************************************/
-#ifndef _IFXMIPS_MEI_H
-#define _IFXMIPS_MEI_H
-/////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#include "ifxmips_mei_app.h"
-
-#define IFXMIPS_MEI_DEBUG
-#define IFXMIPS_MEI_CMV_EXTRA
-#define IFXMIPS_MEI_MAJOR 106
-
-/*
-** Define where in ME Processor's memory map the Stratify chip lives
-*/
-
-#define MAXSWAPSIZE 8 * 1024 //8k *(32bits)
-
-// Mailboxes
-#define MSG_LENGTH 16 // x16 bits
-#define YES_REPLY 1
-#define NO_REPLY 0
-
-#define CMV_TIMEOUT 100 //jiffies
-#define MIB_INTERVAL 10000 //msec
-
-/*** Bit definitions ***/
-
-#define FALSE 0
-#define TRUE 1
-#define BIT0 1<<0
-#define BIT1 1<<1
-#define BIT2 1<<2
-#define BIT3 1<<3
-#define BIT4 1<<4
-#define BIT5 1<<5
-#define BIT6 1<<6
-#define BIT7 1<<7
-#define BIT8 1<<8
-#define BIT9 1<<9
-#define BIT10 1<<10
-#define BIT11 1<<11
-#define BIT12 1<<12
-#define BIT13 1<<13
-#define BIT14 1<<14
-#define BIT15 1<<15
-#define BIT16 1<<16
-#define BIT17 1<<17
-#define BIT18 1<<18
-#define BIT19 1<<19
-#define BIT20 1<<20
-#define BIT21 1<<21
-#define BIT22 1<<22
-#define BIT23 1<<23
-#define BIT24 1<<24
-#define BIT25 1<<25
-#define BIT26 1<<26
-#define BIT27 1<<27
-#define BIT28 1<<28
-#define BIT29 1<<29
-#define BIT30 1<<30
-#define BIT31 1<<31
-
-// ARC register addresss
-#define ARC_STATUS 0x0
-#define ARC_LP_START 0x2
-#define ARC_LP_END 0x3
-#define ARC_DEBUG 0x5
-#define ARC_INT_MASK 0x10A
-
-#define IRAM0_BASE (0x00000)
-#define IRAM1_BASE (0x04000)
-#define BRAM_BASE (0x0A000)
-
-#define ADSL_BASE (0x20000)
-#define CRI_BASE (ADSL_BASE + 0x11F00)
-#define CRI_CCR0 (CRI_BASE + 0x00)
-#define CRI_RST (CRI_BASE + 0x04*4)
-#define ADSL_DILV_BASE (ADSL_BASE+0x20000)
-
-//
-#define IRAM0_ADDR_BIT_MASK 0xFFF
-#define IRAM1_ADDR_BIT_MASK 0xFFF
-#define BRAM_ADDR_BIT_MASK 0xFFF
-#define RX_DILV_ADDR_BIT_MASK 0x1FFF
-
-// CRI_CCR0 Register definitions
-#define CLK_2M_MODE_ENABLE BIT6
-#define ACL_CLK_MODE_ENABLE BIT4
-#define FDF_CLK_MODE_ENABLE BIT2
-#define STM_CLK_MODE_ENABLE BIT0
-
-// CRI_RST Register definitions
-#define FDF_SRST BIT3
-#define MTE_SRST BIT2
-#define FCI_SRST BIT1
-#define AAI_SRST BIT0
-
-// MEI_TO_ARC_INTERRUPT Register definitions
-#define MEI_TO_ARC_INT1 BIT3
-#define MEI_TO_ARC_INT0 BIT2
-#define MEI_TO_ARC_CS_DONE BIT1 //need to check
-#define MEI_TO_ARC_MSGAV BIT0
-
-// ARC_TO_MEI_INTERRUPT Register definitions
-#define ARC_TO_MEI_INT1 BIT8
-#define ARC_TO_MEI_INT0 BIT7
-#define ARC_TO_MEI_CS_REQ BIT6
-#define ARC_TO_MEI_DBG_DONE BIT5
-#define ARC_TO_MEI_MSGACK BIT4
-#define ARC_TO_MEI_NO_ACCESS BIT3
-#define ARC_TO_MEI_CHECK_AAITX BIT2
-#define ARC_TO_MEI_CHECK_AAIRX BIT1
-#define ARC_TO_MEI_MSGAV BIT0
-
-// ARC_TO_MEI_INTERRUPT_MASK Register definitions
-#define GP_INT1_EN BIT8
-#define GP_INT0_EN BIT7
-#define CS_REQ_EN BIT6
-#define DBG_DONE_EN BIT5
-#define MSGACK_EN BIT4
-#define NO_ACC_EN BIT3
-#define AAITX_EN BIT2
-#define AAIRX_EN BIT1
-#define MSGAV_EN BIT0
-
-#define MEI_SOFT_RESET BIT0
-
-#define HOST_MSTR BIT0
-
-#define JTAG_MASTER_MODE 0x0
-#define MEI_MASTER_MODE HOST_MSTR
-
-// MEI_DEBUG_DECODE Register definitions
-#define MEI_DEBUG_DEC_MASK (0x3)
-#define MEI_DEBUG_DEC_AUX_MASK (0x0)
-#define MEI_DEBUG_DEC_DMP1_MASK (0x1)
-#define MEI_DEBUG_DEC_DMP2_MASK (0x2)
-#define MEI_DEBUG_DEC_CORE_MASK (0x3)
-
-#define AUX_STATUS (0x0)
-// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
-// page swap requests.
-#define MEI_TO_ARC_MAILBOX (0xDFD0)
-#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C)
-
-#define ARC_TO_MEI_MAILBOX (0xDFA0)
-#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C)
-
-// Codeswap request messages are indicated by setting BIT31
-#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000)
-
-// Clear Eoc messages received are indicated by setting BIT17
-#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000)
-
-/*
-** Swap page header
-*/
-// Page must be loaded at boot time if size field has BIT31 set
-#define BOOT_FLAG (BIT31)
-#define BOOT_FLAG_MASK ~BOOT_FLAG
-
-#define FREE_RELOAD 1
-#define FREE_SHOWTIME 2
-#define FREE_ALL 3
-
-#define IFX_POP_EOC_DONE 0
-#define IFX_POP_EOC_FAIL -1
-
-#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered
-
-// marcos
-#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
-#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr)))
-#define SET_BIT(reg, mask) reg |= (mask)
-#define CLEAR_BIT(reg, mask) reg &= (~mask)
-#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask) SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
-
-#define ALIGN_SIZE ( 1L<<10 ) //1K size align
-#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
-
-// swap marco
-#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
-#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
-
-// Swap page header describes size in 32-bit words, load location, and image offset
-// for program and/or data segments
-typedef struct _arc_swp_page_hdr {
- u32 p_offset; //Offset bytes of progseg from beginning of image
- u32 p_dest; //Destination addr of progseg on processor
- u32 p_size; //Size in 32-bitwords of program segment
- u32 d_offset; //Offset bytes of dataseg from beginning of image
- u32 d_dest; //Destination addr of dataseg on processor
- u32 d_size; //Size in 32-bitwords of data segment
-} ARC_SWP_PAGE_HDR;
-
-#ifdef CONFIG_PROC_FS
-typedef struct reg_entry {
- int *flag;
- char name[30]; // big enough to hold names
- char description[100]; // big enough to hold description
- unsigned short low_ino;
-} reg_entry_t;
-#endif
-
-/*
-** Swap image header
-*/
-#define GET_PROG 0 // Flag used for program mem segment
-#define GET_DATA 1 // Flag used for data mem segment
-
-// Image header contains size of image, checksum for image, and count of
-// page headers. Following that are 'count' page headers followed by
-// the code and/or data segments to be loaded
-typedef struct _arc_img_hdr {
- u32 size; // Size of binary image in bytes
- u32 checksum; // Checksum for image
- u32 count; // Count of swp pages in image
- ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy
-} ARC_IMG_HDR;
-
-typedef struct smmu_mem_info {
- int type;
- unsigned long nCopy;
- unsigned long size;
- unsigned char *address;
- unsigned char *org_address;
-} smmu_mem_info_t;
-
-/*
-** Native size for the Stratiphy interface is 32-bits. All reads and writes
-** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or
-** byte data. Read routines are provided. Write routines are probably a bad idea, as the
-** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle
-** could very well have unintended results.
-*/
-MEI_ERROR meiCMV (u16 *, int, u16 *); // first arg is CMV to ARC, second to indicate whether need reply
-
-MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize);
-extern int ifx_mei_hdlc_send (char *hdlc_pkt, int hdlc_pkt_len);
-extern int ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len);
-#if defined(__KERNEL__) || defined (IFXMIPS_PORT_RTEMS)
-extern void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size,
- u16 * data, u16 * CMVMSG);
-int ifx_mei_hdlc_send (char *, int);
-int ifx_mei_hdlc_read (char *, int);
-#endif
-
-#endif
+++ /dev/null
-/******************************************************************************
-**
-** FILE NAME : ifxmips_mei_app.h
-** PROJECT : Danube
-** MODULES : MEI
-**
-** DATE : 1 Jan 2006
-** AUTHOR : TC Chen
-** DESCRIPTION : MEI Driver
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Version $Date $Author $Comment
-*******************************************************************************/
-#ifndef _IFXMIPS_MEI_APP_H
-#define _IFXMIPS_MEI_APP_H
- // ioctl control
-#define IFXMIPS_MEI_START 300
-#define IFXMIPS_MEI_REPLY 301
-#define IFXMIPS_MEI_NOREPLY 302
-
-#define IFXMIPS_MEI_RESET 303
-#define IFXMIPS_MEI_REBOOT 304
-#define IFXMIPS_MEI_HALT 305
-#define IFXMIPS_MEI_CMV_WINHOST 306
-#define IFXMIPS_MEI_CMV_READ 307
-#define IFXMIPS_MEI_CMV_WRITE 308
-#define IFXMIPS_MEI_MIB_DAEMON 309
-#define IFXMIPS_MEI_SHOWTIME 310
-#define IFXMIPS_MEI_REMOTE 311
-#define IFXMIPS_MEI_READDEBUG 312
-#define IFXMIPS_MEI_WRITEDEBUG 313
-#define IFXMIPS_MEI_LOP 314
-
-#define IFXMIPS_MEI_PCM_SETUP 315
-#define IFXMIPS_MEI_PCM_START_TIMER 316
-#define IFXMIPS_MEI_PCM_STOP_TIMER 317
-#define IFXMIPS_MEI_PCM_CHECK 318
-#define IFXMIPS_MEI_GET_EOC_LEN 319
-#define IFXMIPS_MEI_GET_EOC_DATA 320
-#define IFXMIPS_MEI_PCM_GETDATA 321
-#define IFXMIPS_MEI_PCM_GPIO 322
-#define IFXMIPS_MEI_EOC_SEND 323
-#define IFXMIPS_MEI_DOWNLOAD 326
-#define IFXMIPS_MEI_JTAG_ENABLE 327
-#define IFXMIPS_MEI_RUN 328
-#define IFXMIPS_MEI_DEBUG_MODE 329
-
-/* Loop diagnostics mode of the ADSL line related constants */
-#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 330
-#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 331
-#define LOOP_DIAGNOSTIC_MODE_COMPLETE 332
-#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 333
-
-/* L3 Power Mode */
-/* Get current Power Moaagement Mode Status*/
-#define GET_POWER_MANAGEMENT_MODE 334
-/* Set L3 Power Mode /disable L3 power mode */
-#define SET_L3_POWER_MODE 335
-
-/* get current dual latency configuration */
-#define GET_ADSL_DUAL_LATENCY 336
-/* enable/disable dual latency path */
-#define SET_ADSL_DUAL_LATENCY 337
-
-/* Enable/Disable autoboot mode. */
-/* When the autoboot mode is disabled, the driver will excute some cmv
- commands for led control and dual latency when DSL startup.*/
-#define AUTOBOOT_ENABLE_SET 338
-
-/* Enable/Disable Quiet Mode*/
-/* Quiet mode is used for firmware debug. if the quiet mode enable, the autoboot daemon will not reset arc when the arc need to reboot */
-#define QUIET_MODE_GET 339
-#define QUIET_MODE_SET 340
-
-/* Enable/Disable showtime lock*/
-/* showtime lock is used for firmware debug. if the showtime lock enable, the autoboot daemon will not reset arc when the arc reach showtime and need to reboot */
-#define SHOWTIME_LOCK_GET 341
-#define SHOWTIME_LOCK_SET 342
-
-#define L0_POWER_MODE 0
-#define L2_POWER_MODE 2
-#define L3_POWER_MODE 3
-
-#define DUAL_LATENCY_US_DS_DISABLE 0
-#define DUAL_LATENCY_US_ENABLE (1<<0)
-#define DUAL_LATENCY_DS_ENABLE (1<<1)
-#define DUAL_LATENCY_US_DS_ENABLE (DUAL_LATENCY_US_ENABLE|DUAL_LATENCY_DS_ENABLE)
-
-#define ME_HDLC_IDLE 0
-#define ME_HDLC_INVALID_MSG 1
-#define ME_HDLC_MSG_QUEUED 2
-#define ME_HDLC_MSG_SENT 3
-#define ME_HDLC_RESP_RCVD 4
-#define ME_HDLC_RESP_TIMEOUT 5
-#define ME_HDLC_RX_BUF_OVERFLOW 6
-#define ME_HDLC_UNRESOLVED 1
-#define ME_HDLC_RESOLVED 2
-
-/*** Enums ***/
-typedef enum mei_error {
- MEI_SUCCESS = 0,
- MEI_FAILURE = -1,
- MEI_MAILBOX_FULL = -2,
- MEI_MAILBOX_EMPTY = -3,
- MEI_MAILBOX_TIMEOUT = -4,
-} MEI_ERROR;
-
-#endif
+++ /dev/null
-/******************************************************************************
-**
-** FILE NAME : ifxmips_mei_app_ioctl.h
-** PROJECT : Danube
-** MODULES : MEI
-**
-** DATE : 1 Jan 2006
-** AUTHOR : TC Chen
-** DESCRIPTION : MEI Driver
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Version $Date $Author $Comment
-*******************************************************************************/
-#ifndef __IFXMIPS_MEI_APP_IOCTL_H
-#define __IFXMIPS_MEI_APP_IOCTL_H
-
-#ifdef __KERNEL__
-#include "ifxmips_mei_ioctl.h"
-#endif
-
-/* Interface Name */
-//#define INTERFACE_NAME <define the interface>
-
-/* adslLineTable constants */
-#define GET_ADSL_LINE_CODE 1
-
-/* adslAtucPhysTable constants */
-#define GET_ADSL_ATUC_PHY 4
-
-/* adslAturPhysTable constants */
-#define GET_ADSL_ATUR_PHY 10
-
-/* adslAtucChanTable constants */
-#define GET_ADSL_ATUC_CHAN_INFO 15
-
-/* adslAturChanTable constants */
-#define GET_ADSL_ATUR_CHAN_INFO 18
-
-/* adslAtucPerfDataTable constants */
-#define GET_ADSL_ATUC_PERF_DATA 21
-
-/* adslAturPerfDataTable constants */
-#define GET_ADSL_ATUR_PERF_DATA 40
-
-/* adslAtucIntervalTable constants */
-#define GET_ADSL_ATUC_INTVL_INFO 60
-
-/* adslAturIntervalTable constants */
-#define GET_ADSL_ATUR_INTVL_INFO 65
-
-/* adslAtucChanPerfDataTable constants */
-#define GET_ADSL_ATUC_CHAN_PERF_DATA 70
-
-/* adslAturChanPerfDataTable constants */
-#define GET_ADSL_ATUR_CHAN_PERF_DATA 90
-
-/* adslAtucChanIntervalTable constants */
-#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110
-
-/* adslAturChanIntervalTable constants */
-#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115
-
-/* adslLineAlarmConfProfileTable constants */
-#define GET_ADSL_ALRM_CONF_PROF 120
-#define SET_ADSL_ALRM_CONF_PROF 121
-
-/* adslAturTrap constants */
-#define ADSL_ATUR_TRAPS 135
-
-////////////////// RFC-3440 //////////////
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-/* adslLineExtTable */
-#define GET_ADSL_ATUC_LINE_EXT 201
-#define SET_ADSL_ATUC_LINE_EXT 203
-
-/* adslAtucPerfDateExtTable */
-#define GET_ADSL_ATUC_PERF_DATA_EXT 205
-
-/* adslAtucIntervalExtTable */
-#define GET_ADSL_ATUC_INTVL_EXT_INFO 221
-
-/* adslAturPerfDataExtTable */
-#define GET_ADSL_ATUR_PERF_DATA_EXT 225
-
-/* adslAturIntervalExtTable */
-#define GET_ADSL_ATUR_INTVL_EXT_INFO 233
-
-/* adslAlarmConfProfileExtTable */
-#define GET_ADSL_ALRM_CONF_PROF_EXT 235
-#define SET_ADSL_ALRM_CONF_PROF_EXT 236
-
-/* adslAturExtTrap */
-#define ADSL_ATUR_EXT_TRAPS 240
-
-#endif
-
-/* The following constants are added to support the WEB related ADSL Statistics */
-
-/* adslLineStatus constants */
-#define GET_ADSL_LINE_STATUS 245
-
-/* adslLineRate constants */
-#define GET_ADSL_LINE_RATE 250
-
-/* adslLineInformation constants */
-#define GET_ADSL_LINE_INFO 255
-
-/* adslNearEndPerformanceStats constants */
-#define GET_ADSL_NEAREND_STATS 270
-
-/* adslFarEndPerformanceStats constants */
-#define GET_ADSL_FAREND_STATS 290
-
-/* Sub-carrier related parameters */
-#define GET_ADSL_LINE_INIT_STATS 150
-#define GET_ADSL_POWER_SPECTRAL_DENSITY 151
-
-#define IFXMIPS_MIB_LO_ATUC 295
-#define IFXMIPS_MIB_LO_ATUR 296
-
-#define GET_ADSL_ATUC_SUBCARRIER_STATS 297
-#define GET_ADSL_ATUR_SUBCARRIER_STATS 298
-
-
-
-///////////////////////////////////////////////////////////
-// makeCMV(Opcode, Group, Address, Index, Size, Data)
-
-/* adslLineCode Flags */
-#define LINE_CODE_FLAG 0x1 /* BIT 0th position */
-
-/* adslAtucPhysTable Flags */
-#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */
-#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data,TxMessage)
-#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data,TxMessage)
-
-#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */
-#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data,TxMessage)
-
-#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */
-#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data,TxMessage)
-
-#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */
-
-#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */
-#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data,TxMessage)
-
-#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */
-#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data,TxMessage)
-
-
-/* adslAturPhysTable Flags */
-#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */
-#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data,TxMessage)
-#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data,TxMessage)
-
-#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */
-#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data,TxMessage)
-
-#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */
-#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data,TxMessage)
-
-#define ATUR_SNRMGN_FLAG 0x8
-#if 0 /* [ Ritesh. Use PLAM 45 0 for 0.1dB resolution rather than INFO 68 3 */
-#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data,TxMessage)
-#else
-#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, PLAM_SNRMargin_0_1db, 0, 1, data, TxMessage)
-#endif
-
-#define ATUR_ATTN_FLAG 0x10
-#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data,TxMessage)
-
-#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */
-
-#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */
-#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data,TxMessage)
-
-#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */
-#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data,TxMessage)
-
-/* adslAtucChanTable Flags */
-#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */
-//KD #define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data,TxMessage)
-#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 92, 1, 1, data,TxMessage)
-
-#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */
-#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data,TxMessage)
-
-#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */
-
-/* adslAturChanTable Flags */
-#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */
-//KD #define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data,TxMessage)
-#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 93, 1, 1, data,TxMessage)
-
-#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */
-#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data,TxMessage)
-
-#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */
-
-#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */
-
-/* adslAtucPerfDataTable Flags */
-#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */
-#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */
-#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data,TxMessage)
-#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */
-#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data,TxMessage)
-#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */
-#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */
-#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */
-#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */
-#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */
-#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */
-#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */
-#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */
-#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */
-#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */
-#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */
-#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */
-#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */
-#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */
-#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */
-
-/* adslAturPerfDataTable Flags */
-#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */
-#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */
-#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */
-#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data,TxMessage)
-#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */
-#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data,TxMessage)
-#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */
-#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */
-#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */
-#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */
-#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */
-#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */
-#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */
-#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */
-#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */
-#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */
-#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */
-#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */
-#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */
-#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */
-
-/* adslAtucIntervalTable Flags */
-#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */
-#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */
-#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */
-#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */
-#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */
-
-/* adslAturIntervalTable Flags */
-#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */
-#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */
-#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */
-#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */
-#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */
-
-/* adslAtucChanPerfDataTable Flags */
-#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */
-#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */
-#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */
-#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
-#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
-#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
-#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */
-#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
-#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
-#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
-#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/
-#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
-#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
-#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
-#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
-#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
-#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */
-#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
-#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
-
-
-/* adslAturChanPerfDataTable Flags */
-#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */
-#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
-#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
-#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */
-#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
-#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
-#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */
-#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data,TxMessage)
-#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data,TxMessage)
-#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
-#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data,TxMessage)
-#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data,TxMessage)
-#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
-#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
-#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */
-#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
-#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
-#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
-#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
-#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
-#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
-#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
-#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
-#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */
-#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
-#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
-
-/* adslAtucChanIntervalTable Flags */
-#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */
-#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */
-#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */
-#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */
-#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */
-#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */
-
-/* adslAturChanIntervalTable Flags */
-#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */
-#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */
-#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */
-#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */
-#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */
-#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */
-
-/* adslLineAlarmConfProfileTable Flags */
-#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */
-#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */
-#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */
-#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */
-#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */
-#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */
-#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */
-#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */
-#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */
-#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */
-#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */
-#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */
-#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */
-#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */
-#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */
-#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */
-#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */
-
-
-/* adslAturTraps Flags */
-#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */
-#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */
-#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */
-#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */
-#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */
-#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */
-#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */
-#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */
-#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */
-
-//RFC- 3440 FLAG DEFINITIONS
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-/* adslLineExtTable flags */
-#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */
-#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
-#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */
-#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
-#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data,TxMessage)
-#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */
-#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data,TxMessage)
-#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */
-#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data,TxMessage)
-
-/* adslAtucPerfDataExtTable flags */
-#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */
-#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
-#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */
-#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
-#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */
-#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
-#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */
-#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
-#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */
-#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */
-#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */
-#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */
-#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */
-#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */
-#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */
-#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */
-#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */
-#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */
-#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */
-#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */
-
-/* adslAturPerfDataExtTable */
-#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */
-#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)
-#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */
-#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
-#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */
-#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */
-#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */
-#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */
-#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */
-#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */
-
-/* adslAutcIntervalExtTable flags */
-#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */
-#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */
-#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */
-#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */
-
-/* adslAturIntervalExtTable */
-#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */
-#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */
-
-/* adslAlarmConfProfileExtTable */
-#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */
-#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */
-#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */
-#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */
-#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */
-
-/* adslAturExtTraps */
-#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */
-#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */
-#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */
-#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */
-#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */
-
-#endif
-
-/* adslLineStatus Flags */
-#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */
-#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
-#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */
-#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data, TxMessage)
-#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */
-#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data, TxMessage)
-#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */
-#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data, TxMessage)
-
-/* adslLineRate Flags */
-#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data, TxMessage)
-
-
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data, TxMessage)
-
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data, TxMessage)
-
-#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data, TxMessage)
-
-
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data, TxMessage)
-
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data, TxMessage)
-
-#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */
-#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data, TxMessage)
-
-#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */
-#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data, TxMessage)
-
-/* adslLineInformation Flags */
-#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */
-#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data, TxMessage)
-#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data, TxMessage)
-#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */
-#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data, TxMessage)
-#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data, TxMessage)
-#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */
-#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data, TxMessage)
-#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */
-#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data, TxMessage)
-#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */
-#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data, TxMessage)
-#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */
-#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data, TxMessage)
-#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */
-#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data, TxMessage)
-#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data, TxMessage)
-#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data, TxMessage)
-#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */
-#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data, TxMessage)
-#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */
-#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data, TxMessage)
-#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */
-#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data, TxMessage)
-
-/* adslNearEndPerformanceStats Flags */
-#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data, TxMessage)
-#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data, TxMessage)
-#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */
-#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data, TxMessage)
-#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */
-#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */
-#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */
-#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */
-#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */
-#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */
-#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data, TxMessage)
-#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data, TxMessage)
-#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data, TxMessage)
-#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data, TxMessage)
-#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */
-#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data, TxMessage)
-#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */
-#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data, TxMessage)
-#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */
-#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
-#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */
-#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data, TxMessage)
-#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */
-#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
-#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */
-#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data, TxMessage)
-#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data, TxMessage)
-#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */
-
-/* adslFarEndPerformanceStats Flags */
-#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data, TxMessage)
-#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */
-#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */
-#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */
-#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */
-#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */
-#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data, TxMessage)
-#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data, TxMessage)
-#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */
-#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data, TxMessage)
-#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data, TxMessage)
-#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */
-#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data, TxMessage)
-#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */
-#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data, TxMessage)
-#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */
-#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)
-#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */
-#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data, TxMessage)
-#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */
-#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
-#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */
-#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data, TxMessage)
-#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data, TxMessage)
-#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */
-// 603221:tc.chen end
-/* TR-69 related additional parameters - defines */
-/* Defines for struct adslATURSubcarrierInfo */
-#define NEAREND_HLINSC 0x1
-#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data, TxMessage)
-#define NEAREND_HLINPS 0x2
-#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data, TxMessage)
-#define NEAREND_HLOGMT 0x4
-#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data, TxMessage)
-#define NEAREND_HLOGPS 0x8
-#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data, TxMessage)
-#define NEAREND_QLNMT 0x10
-#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data, TxMessage)
-#define NEAREND_QLNPS 0x20
-#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data, TxMessage)
-#define NEAREND_SNRMT 0x40
-#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data, TxMessage)
-#define NEAREND_SNRPS 0x80
-#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data, TxMessage)
-#define NEAREND_BITPS 0x100
-#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data, TxMessage)
-#define NEAREND_GAINPS 0x200
-#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data, TxMessage)
-
-/* Defines for struct adslATUCSubcarrierInfo */
-#define FAREND_HLINSC 0x1
-
-/* As per the feedback from Knut on 21/08/2006, the cmv command of HLINSC should be INFO 70 2 */
-#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 2, 1, data, TxMessage)
-#define FAREND_HLINPS 0x2
-#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data, TxMessage)
-#define FAREND_HLOGMT 0x4
-#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data, TxMessage)
-#define FAREND_HLOGPS 0x8
-#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data, TxMessage)
-#define FAREND_QLNMT 0x10
-#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data, TxMessage)
-#define FAREND_QLNPS 0x20
-#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data, TxMessage)
-#define FAREND_SNRMT 0x40
-#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data, TxMessage)
-#define FAREND_SNRPS 0x80
-#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 11, idx, size, data, TxMessage)
-#define FAREND_SNRPS_DIAG_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data, TxMessage)
-#define FAREND_BITPS 0x100
-#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data, TxMessage)
-#define FAREND_GAINPS 0x200
-#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data, TxMessage)
-
-
-// GET_ADSL_POWER_SPECTRAL_DENSITY
-#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data, TxMessage)
-#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data, TxMessage)
-#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data, TxMessage)
-#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data, TxMessage)
-#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data, TxMessage)
-#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data, TxMessage)
-
-/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing
-
-#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val))
-// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer
-
-#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0)
-// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer
-
-
-#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit))
-// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer
-
-
-////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION
-
-//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type.
- //
-#define u32 unsigned int
-#define u16 unsigned short
-#define s16 short
-#define u8 unsigned char
-
-
-typedef u32 AdslPerfTimeElapsed;
-typedef u32 AdslPerfPrevDayCount;
-typedef u32 PerfCurrentCount;
-typedef u32 PerfIntervalCount;
-typedef u32 AdslPerfCurrDayCount;
-
-
-//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry)
-
-typedef struct adslLineTableEntry {
- int ifIndex;
- int adslLineCode;
- u8 flags;
-} adslLineTableEntry;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct adslLineExtTableEntry {
- int ifIndex;
- u16 adslLineTransAtucCap;
- u16 adslLineTransAtucConfig;
- u16 adslLineTransAtucActual;
- int adslLineGlitePowerState;
- u32 flags;
-}adslLineExtTableEntry;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry)
-#ifndef u_char
-#define u_char u8
-#endif
-
-typedef struct adslVendorId {
- u16 country_code;
- u_char provider_id[4]; /* Ascii characters */
- u_char revision_info[2];
-}adslVendorId;
-
-typedef struct adslAtucPhysEntry {
- int ifIndex;
- char serial_no[32];
- union {
- char vendor_id[16];
- adslVendorId vendor_info;
- } vendor_id;
- char version_no[16];
- u32 status;
- int outputPwr;
- u32 attainableRate;
- u8 flags;
-} adslAtucPhysEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry)
-
-typedef struct adslAturPhysEntry {
- int ifIndex;
- char serial_no[32];
- union {
- char vendor_id[16];
- adslVendorId vendor_info;
- } vendor_id;
- char version_no[16];
- int SnrMgn;
- u32 Attn;
- u32 status;
- int outputPwr;
- u32 attainableRate;
- u8 flags;
-} adslAturPhysEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo)
-
-typedef struct adslAtucChanInfo {
- int ifIndex;
- u32 interleaveDelay;
- u32 currTxRate;
- u32 prevTxRate;
- u8 flags;
-} adslAtucChanInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo)
-
-typedef struct adslAturChanInfo {
- int ifIndex;
- u32 interleaveDelay;
- u32 currTxRate;
- u32 prevTxRate;
- u32 crcBlkLen;
- u8 flags;
-} adslAturChanInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry)
-
-typedef struct atucPerfDataEntry
-{
- int ifIndex;
- u32 adslAtucPerfLofs;
- u32 adslAtucPerfLoss;
- u32 adslAtucPerfESs;
- u32 adslAtucPerfInits;
- int adslAtucPerfValidIntervals;
- int adslAtucPerfInvalidIntervals;
- AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed;
- PerfCurrentCount adslAtucPerfCurr15MinLofs;
- PerfCurrentCount adslAtucPerfCurr15MinLoss;
- PerfCurrentCount adslAtucPerfCurr15MinESs;
- PerfCurrentCount adslAtucPerfCurr15MinInits;
- AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed;
- AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs;
- AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss;
- AdslPerfCurrDayCount adslAtucPerfCurr1DayESs;
- AdslPerfCurrDayCount adslAtucPerfCurr1DayInits;
- int adslAtucPerfPrev1DayMoniSecs;
- AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs;
- AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss;
- AdslPerfPrevDayCount adslAtucPerfPrev1DayESs;
- AdslPerfPrevDayCount adslAtucPerfPrev1DayInits;
- u32 flags;
-} atucPerfDataEntry;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct atucPerfDataExtEntry
- {
- int ifIndex;
- u32 adslAtucPerfStatFastR;
- u32 adslAtucPerfStatFailedFastR;
- u32 adslAtucPerfStatSesL;
- u32 adslAtucPerfStatUasL;
- u32 adslAtucPerfCurr15MinFastR;
- u32 adslAtucPerfCurr15MinFailedFastR;
- u32 adslAtucPerfCurr15MinSesL;
- u32 adslAtucPerfCurr15MinUasL;
- u32 adslAtucPerfCurr1DayFastR;
- u32 adslAtucPerfCurr1DayFailedFastR;
- u32 adslAtucPerfCurr1DaySesL;
- u32 adslAtucPerfCurr1DayUasL;
- u32 adslAtucPerfPrev1DayFastR;
- u32 adslAtucPerfPrev1DayFailedFastR;
- u32 adslAtucPerfPrev1DaySesL;
- u32 adslAtucPerfPrev1DayUasL;
- u32 flags;
-} atucPerfDataExtEntry;
-
-#endif
-//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry)
-
-typedef struct aturPerfDataEntry
-{
- int ifIndex;
- u32 adslAturPerfLofs;
- u32 adslAturPerfLoss;
- u32 adslAturPerfLprs;
- u32 adslAturPerfESs;
- int adslAturPerfValidIntervals;
- int adslAturPerfInvalidIntervals;
- AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed;
- PerfCurrentCount adslAturPerfCurr15MinLofs;
- PerfCurrentCount adslAturPerfCurr15MinLoss;
- PerfCurrentCount adslAturPerfCurr15MinLprs;
- PerfCurrentCount adslAturPerfCurr15MinESs;
- AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed;
- AdslPerfCurrDayCount adslAturPerfCurr1DayLofs;
- AdslPerfCurrDayCount adslAturPerfCurr1DayLoss;
- AdslPerfCurrDayCount adslAturPerfCurr1DayLprs;
- AdslPerfCurrDayCount adslAturPerfCurr1DayESs;
- int adslAturPerfPrev1DayMoniSecs;
- AdslPerfPrevDayCount adslAturPerfPrev1DayLofs;
- AdslPerfPrevDayCount adslAturPerfPrev1DayLoss;
- AdslPerfPrevDayCount adslAturPerfPrev1DayLprs;
- AdslPerfPrevDayCount adslAturPerfPrev1DayESs;
- u32 flags;
-} aturPerfDataEntry;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct aturPerfDataExtEntry
- {
- int ifIndex;
- u32 adslAturPerfStatSesL;
- u32 adslAturPerfStatUasL;
- u32 adslAturPerfCurr15MinSesL;
- u32 adslAturPerfCurr15MinUasL;
- u32 adslAturPerfCurr1DaySesL;
- u32 adslAturPerfCurr1DayUasL;
- u32 adslAturPerfPrev1DaySesL;
- u32 adslAturPerfPrev1DayUasL;
- u32 flags;
-} aturPerfDataExtEntry;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo)
-
-typedef struct adslAtucIntvlInfo {
- int ifIndex;
- int IntervalNumber;
- PerfIntervalCount intervalLOF;
- PerfIntervalCount intervalLOS;
- PerfIntervalCount intervalES;
- PerfIntervalCount intervalInits;
- int intervalValidData;
- u8 flags;
-} adslAtucIntvlInfo;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct adslAtucInvtlExtInfo
- {
- int ifIndex;
- int IntervalNumber;
- u32 adslAtucIntervalFastR;
- u32 adslAtucIntervalFailedFastR;
- u32 adslAtucIntervalSesL;
- u32 adslAtucIntervalUasL;
- u32 flags;
-} adslAtucInvtlExtInfo;
-#endif
-//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo)
-
-typedef struct adslAturIntvlInfo {
- int ifIndex;
- int IntervalNumber;
- PerfIntervalCount intervalLOF;
- PerfIntervalCount intervalLOS;
- PerfIntervalCount intervalLPR;
- PerfIntervalCount intervalES;
- int intervalValidData;
- u8 flags;
-} adslAturIntvlInfo;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct adslAturInvtlExtInfo
- {
- int ifIndex;
- int IntervalNumber;
- u32 adslAturIntervalSesL;
- u32 adslAturIntervalUasL;
- u32 flags;
-} adslAturInvtlExtInfo;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry)
-
-typedef struct atucChannelPerfDataEntry
-{
- int ifIndex;
- u32 adslAtucChanReceivedBlks;
- u32 adslAtucChanTransmittedBlks;
- u32 adslAtucChanCorrectedBlks;
- u32 adslAtucChanUncorrectBlks;
- int adslAtucChanPerfValidIntervals;
- int adslAtucChanPerfInvalidIntervals;
- AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed;
- PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks;
- PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks;
- PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks;
- PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks;
- AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed;
- AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks;
- AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks;
- AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks;
- AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks;
- int adslAtucChanPerfPrev1DayMoniSecs;
- AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks;
- AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks;
- AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks;
- AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks;
- u32 flags;
-}atucChannelPerfDataEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry)
-
-typedef struct aturChannelPerfDataEntry
-{
- int ifIndex;
- u32 adslAturChanReceivedBlks;
- u32 adslAturChanTransmittedBlks;
- u32 adslAturChanCorrectedBlks;
- u32 adslAturChanUncorrectBlks;
- int adslAturChanPerfValidIntervals;
- int adslAturChanPerfInvalidIntervals;
- AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed;
- PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks;
- PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks;
- PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks;
- PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks;
- AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed;
- AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks;
- AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks;
- AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks;
- AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks;
- int adslAturChanPerfPrev1DayMoniSecs;
- AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks;
- AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks;
- AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks;
- AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks;
- u32 flags;
-} aturChannelPerfDataEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo)
-
-typedef struct adslAtucChanIntvlInfo {
- int ifIndex;
- int IntervalNumber;
- PerfIntervalCount chanIntervalRecvdBlks;
- PerfIntervalCount chanIntervalXmitBlks;
- PerfIntervalCount chanIntervalCorrectedBlks;
- PerfIntervalCount chanIntervalUncorrectBlks;
- int intervalValidData;
- u8 flags;
-} adslAtucChanIntvlInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo)
-
-typedef struct adslAturChanIntvlInfo {
- int ifIndex;
- int IntervalNumber;
- PerfIntervalCount chanIntervalRecvdBlks;
- PerfIntervalCount chanIntervalXmitBlks;
- PerfIntervalCount chanIntervalCorrectedBlks;
- PerfIntervalCount chanIntervalUncorrectBlks;
- int intervalValidData;
- u8 flags;
-} adslAturChanIntvlInfo;
-
-
-//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry)
-//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry)
-
-typedef struct adslLineAlarmConfProfileEntry
- {
- unsigned char adslLineAlarmConfProfileName[32];
- int adslAtucThresh15MinLofs;
- int adslAtucThresh15MinLoss;
- int adslAtucThresh15MinESs;
- u32 adslAtucThreshFastRateUp;
- u32 adslAtucThreshInterleaveRateUp;
- u32 adslAtucThreshFastRateDown;
- u32 adslAtucThreshInterleaveRateDown;
- int adslAtucInitFailureTrapEnable;
- int adslAturThresh15MinLofs;
- int adslAturThresh15MinLoss;
- int adslAturThresh15MinLprs;
- int adslAturThresh15MinESs;
- u32 adslAturThreshFastRateUp;
- u32 adslAturThreshInterleaveRateUp;
- u32 adslAturThreshFastRateDown;
- u32 adslAturThreshInterleaveRateDown;
- int adslLineAlarmConfProfileRowStatus;
- u32 flags;
-} adslLineAlarmConfProfileEntry;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct adslLineAlarmConfProfileExtEntry
- {
- u8 adslLineAlarmConfProfileExtName[32];
- u32 adslAtucThreshold15MinFailedFastR;
- u32 adslAtucThreshold15MinSesL;
- u32 adslAtucThreshold15MinUasL;
- u32 adslAturThreshold15MinSesL;
- u32 adslAturThreshold15MinUasL;
- u32 flags;
-} adslLineAlarmConfProfileExtEntry;
-#endif
-//TRAPS
-
-/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */
-typedef struct adslLineStatus
- {
- int adslModemStatus;
- u32 adslModeSelected;
- int adslAtucThresh15MinESs;
- int adslTrellisCodeEnable;
- int adslLatency;
- u8 flags;
- } adslLineStatusInfo;
-
-typedef struct adslLineRate
- {
- u32 adslDataRateds;
- u32 adslDataRateus;
- u32 adslATTNDRds;
- u32 adslATTNDRus;
- u8 flags;
- } adslLineRateInfo;
-
-typedef struct adslLineInfo
- {
- u32 adslInterleaveDepthds;
- u32 adslInterleaveDepthus;
- u32 adslLATNds;
- u32 adslLATNus;
- u32 adslSATNds;
- u32 adslSATNus;
- int adslSNRMds;
- int adslSNRMus;
- int adslACATPds;
- int adslACATPus;
- u32 flags;
- } adslLineInfo;
-
-typedef struct adslNearEndPerfStats
- {
- u32 adslSuperFrames;
- u32 adslneLOS;
- u32 adslneLOF;
- u32 adslneLPR;
- u32 adslneNCD;
- u32 adslneLCD;
- u32 adslneCRC;
- u32 adslneRSCorr;
- u32 adslneFECS;
- u32 adslneES;
- u32 adslneSES;
- u32 adslneLOSS;
- u32 adslneUAS;
- u32 adslneHECErrors;
- u32 flags;
- } adslNearEndPerfStats;
-
-typedef struct adslFarEndPerfStats
- {
- u32 adslfeLOS;
- u32 adslfeLOF;
- u32 adslfeLPR;
- u32 adslfeNCD;
- u32 adslfeLCD;
- u32 adslfeCRC;
- u32 adslfeRSCorr;
- u32 adslfeFECS;
- u32 adslfeES;
- u32 adslfeSES;
- u32 adslfeLOSS;
- u32 adslfeUAS;
- u32 adslfeHECErrors;
- u32 flags;
- } adslFarEndPerfStats;
-
-/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */
-typedef struct adslATURSubcarrierInfo {
- int ifindex;
- u16 HLINSCds;
- u16 HLINpsds[1024];/* Even index = real part; Odd Index
- = imaginary part for each tone */
- u16 HLOGMTds;
- u16 HLOGpsds[512];
- u16 QLNMTds;
- u16 QLNpsds[512];
- u16 SNRMTds;
- u16 SNRpsds[512];
- u16 BITpsds[512];
- s16 GAINpsds[512]; /* Signed value in 0.1dB units. i.e dB * 10.
- Needs to be converted into linear scale*/
- u16 flags;
-}adslATURSubcarrierInfo;
-
-typedef struct adslATUCSubcarrierInfo {
- int ifindex;
- u16 HLINSCus;
- u16 HLINpsus[128];/* Even index = real part; Odd Index
- = imaginary part for each tone */
- u16 HLOGMTus;
- u16 HLOGpsus[64];
- u16 QLNMTus;
- u16 QLNpsus[64];
- u16 SNRMTus;
- u16 SNRpsus[64];
- u16 BITpsus[64];
- s16 GAINpsus[64]; /* Signed value in 0.1dB units. i.e dB * 10.
- Needs to be converted into linear scale*/
- u16 flags;
-}adslATUCSubcarrierInfo;
-
-#ifndef u_int16
-#define u_int16 u16
-#endif
-
-typedef struct adslInitStats {
- u_int16 FullInitializationCount;
- u_int16 FailedFullInitializationCount;
- u_int16 LINIT_Errors;
- u_int16 Init_Timeouts;
-}adslInitStats;
-
-typedef struct adslPowerSpectralDensity {
- int ACTPSDds;
- int ACTPSDus;
-}adslPowerSpectralDensity;
-
-//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags)
-typedef union structpts {
- adslLineTableEntry * adslLineTableEntry_pt;
- adslAtucPhysEntry * adslAtucPhysEntry_pt;
- adslAturPhysEntry * adslAturPhysEntry_pt;
- adslAtucChanInfo * adslAtucChanInfo_pt;
- adslAturChanInfo * adslAturChanInfo_pt;
- atucPerfDataEntry * atucPerfDataEntry_pt;
- aturPerfDataEntry * aturPerfDataEntry_pt;
- adslAtucIntvlInfo * adslAtucIntvlInfo_pt;
- adslAturIntvlInfo * adslAturIntvlInfo_pt;
- atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt;
- aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt;
- adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt;
- adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt;
- adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt;
- // RFC 3440
-
- #ifdef IFXMIPS_MEI_MIB_RFC3440
- adslLineExtTableEntry * adslLineExtTableEntry_pt;
- atucPerfDataExtEntry * atucPerfDataExtEntry_pt;
- adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt;
- aturPerfDataExtEntry * aturPerfDataExtEntry_pt;
- adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt;
- adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt;
- #endif
- adslLineStatusInfo * adslLineStatusInfo_pt;
- adslLineRateInfo * adslLineRateInfo_pt;
- adslLineInfo * adslLineInfo_pt;
- adslNearEndPerfStats * adslNearEndPerfStats_pt;
- adslFarEndPerfStats * adslFarEndPerfStats_pt;
- adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt;
- adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt;
- adslPowerSpectralDensity * adslPowerSpectralDensity_pt;
-}structpts;
-
-#endif /* ] __IFXMIPS_MEI_APP_IOCTL_H */
+++ /dev/null
-/******************************************************************************
-**
-** FILE NAME : ifxmips_mei_bsp.h
-** PROJECT : Danube
-** MODULES : MEI
-**
-** DATE : 1 Jan 2006
-** AUTHOR : TC Chen
-** DESCRIPTION : MEI Driver
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Version $Date $Author $Comment
-*******************************************************************************/
-#ifndef _IFXMIPS_MEI_BSP_H_
-#define _IFXMIPS_MEI_BSP_H_
-
-/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/
-#define MEI_DATA_XFR_OFFSET (0x0000)
-#define MEI_VERSION_OFFSET (0x0004)
-#define MEI_ARC_GP_STAT_OFFSET (0x0008)
-#define MEI_DATA_XFR_STAT_OFFSET (0x000C)
-#define MEI_XFR_ADDR_OFFSET (0x0010)
-#define MEI_MAX_WAIT_OFFSET (0x0014)
-#define MEI_TO_ARC_INT_OFFSET (0x0018)
-#define ARC_TO_MEI_INT_OFFSET (0x001C)
-#define ARC_TO_MEI_INT_MASK_OFFSET (0x0020)
-#define MEI_DEBUG_WAD_OFFSET (0x0024)
-#define MEI_DEBUG_RAD_OFFSET (0x0028)
-#define MEI_DEBUG_DATA_OFFSET (0x002C)
-#define MEI_DEBUG_DEC_OFFSET (0x0030)
-#define MEI_CONFIG_OFFSET (0x0034)
-#define MEI_RST_CONTROL_OFFSET (0x0038)
-#define MEI_DBG_MASTER_OFFSET (0x003C)
-#define MEI_CLK_CONTROL_OFFSET (0x0040)
-#define MEI_BIST_CONTROL_OFFSET (0x0044)
-#define MEI_BIST_STAT_OFFSET (0x0048)
-#define MEI_XDATA_BASE_SH_OFFSET (0x004c)
-#define MEI_XDATA_BASE_OFFSET (0x0050)
-#define MEI_XMEM_BAR_BASE_OFFSET (0x0054)
-#define MEI_XMEM_BAR0_OFFSET (0x0054)
-#define MEI_XMEM_BAR1_OFFSET (0x0058)
-#define MEI_XMEM_BAR2_OFFSET (0x005C)
-#define MEI_XMEM_BAR3_OFFSET (0x0060)
-#define MEI_XMEM_BAR4_OFFSET (0x0064)
-#define MEI_XMEM_BAR5_OFFSET (0x0068)
-#define MEI_XMEM_BAR6_OFFSET (0x006C))
-#define MEI_XMEM_BAR7_OFFSET (0x0070)
-#define MEI_XMEM_BAR8_OFFSET (0x0074)
-#define MEI_XMEM_BAR9_OFFSET (0x0078)
-#define MEI_XMEM_BAR10_OFFSET (0x007C)
-#define MEI_XMEM_BAR11_OFFSET (0x0080)
-#define MEI_XMEM_BAR12_OFFSET (0x0084)
-#define MEI_XMEM_BAR13_OFFSET (0x0088)
-#define MEI_XMEM_BAR14_OFFSET (0x008C)
-#define MEI_XMEM_BAR15_OFFSET (0x0090)
-#define MEI_XMEM_BAR16_OFFSET (0x0094)
-
-#define WHILE_DELAY 20000
-/*
-** Define where in ME Processor's memory map the Stratify chip lives
-*/
-
-#define MAXSWAPSIZE 8 * 1024 //8k *(32bits)
-
-// Mailboxes
-#define MSG_LENGTH 16 // x16 bits
-#define YES_REPLY 1
-#define NO_REPLY 0
-
-#define CMV_TIMEOUT 1000 //jiffies
-
-// Block size per BAR
-#define SDRAM_SEGMENT_SIZE (64*1024)
-// Number of Bar registers
-#define MAX_BAR_REGISTERS (17)
-
-#define XDATA_REGISTER (15)
-
-#define IFXMIPS_MEI_IOCTL_CMV_WINHOST IFX_ADSL_IOC_CMV_WINHOST
-
-#define IFXMIPS_MEI_IOCTL_CMV_READ IFX_ADSL_IOC_CMV_READ
-#define IFXMIPS_MEI_IOCTL_CMV_WRITE IFX_ADSL_IOC_CMV_WRITE
-
-#define IFXMIPS_MEI_IOCTL_GET_BASE_ADDRESS IFX_ADSL_IOC_GET_BASE_ADDRESS
-
-// ARC register addresss
-#define ARC_STATUS 0x0
-#define ARC_LP_START 0x2
-#define ARC_LP_END 0x3
-#define ARC_DEBUG 0x5
-#define ARC_INT_MASK 0x10A
-
-#define IRAM0_BASE (0x00000)
-#define IRAM1_BASE (0x04000)
-#define BRAM_BASE (0x0A000)
-
-#define ADSL_BASE (0x20000)
-#define CRI_BASE (ADSL_BASE + 0x11F00)
-#define CRI_CCR0 (CRI_BASE + 0x00)
-#define CRI_RST (CRI_BASE + 0x04*4)
-#define ADSL_DILV_BASE (ADSL_BASE+0x20000)
-
-//
-#define IRAM0_ADDR_BIT_MASK 0xFFF
-#define IRAM1_ADDR_BIT_MASK 0xFFF
-#define BRAM_ADDR_BIT_MASK 0xFFF
-#define RX_DILV_ADDR_BIT_MASK 0x1FFF
-
-/*** Bit definitions ***/
-
-#define FALSE 0
-#define TRUE 1
-#define BIT0 1<<0
-#define BIT1 1<<1
-#define BIT2 1<<2
-#define BIT3 1<<3
-#define BIT4 1<<4
-#define BIT5 1<<5
-#define BIT6 1<<6
-#define BIT7 1<<7
-#define BIT8 1<<8
-#define BIT9 1<<9
-#define BIT10 1<<10
-#define BIT11 1<<11
-#define BIT12 1<<12
-#define BIT13 1<<13
-#define BIT14 1<<14
-#define BIT15 1<<15
-#define BIT16 1<<16
-#define BIT17 1<<17
-#define BIT18 1<<18
-#define BIT19 1<<19
-#define BIT20 1<<20
-#define BIT21 1<<21
-#define BIT22 1<<22
-#define BIT23 1<<23
-#define BIT24 1<<24
-#define BIT25 1<<25
-#define BIT26 1<<26
-#define BIT27 1<<27
-#define BIT28 1<<28
-#define BIT29 1<<29
-#define BIT30 1<<30
-#define BIT31 1<<31
-
-// CRI_CCR0 Register definitions
-#define CLK_2M_MODE_ENABLE BIT6
-#define ACL_CLK_MODE_ENABLE BIT4
-#define FDF_CLK_MODE_ENABLE BIT2
-#define STM_CLK_MODE_ENABLE BIT0
-
-// CRI_RST Register definitions
-#define FDF_SRST BIT3
-#define MTE_SRST BIT2
-#define FCI_SRST BIT1
-#define AAI_SRST BIT0
-
-// MEI_TO_ARC_INTERRUPT Register definitions
-#define MEI_TO_ARC_INT1 BIT3
-#define MEI_TO_ARC_INT0 BIT2
-#define MEI_TO_ARC_CS_DONE BIT1 //need to check
-#define MEI_TO_ARC_MSGAV BIT0
-
-// ARC_TO_MEI_INTERRUPT Register definitions
-#define ARC_TO_MEI_INT1 BIT8
-#define ARC_TO_MEI_INT0 BIT7
-#define ARC_TO_MEI_CS_REQ BIT6
-#define ARC_TO_MEI_DBG_DONE BIT5
-#define ARC_TO_MEI_MSGACK BIT4
-#define ARC_TO_MEI_NO_ACCESS BIT3
-#define ARC_TO_MEI_CHECK_AAITX BIT2
-#define ARC_TO_MEI_CHECK_AAIRX BIT1
-#define ARC_TO_MEI_MSGAV BIT0
-
-// ARC_TO_MEI_INTERRUPT_MASK Register definitions
-#define GP_INT1_EN BIT8
-#define GP_INT0_EN BIT7
-#define CS_REQ_EN BIT6
-#define DBG_DONE_EN BIT5
-#define MSGACK_EN BIT4
-#define NO_ACC_EN BIT3
-#define AAITX_EN BIT2
-#define AAIRX_EN BIT1
-#define MSGAV_EN BIT0
-
-#define MEI_SOFT_RESET BIT0
-
-#define HOST_MSTR BIT0
-
-#define JTAG_MASTER_MODE 0x0
-#define MEI_MASTER_MODE HOST_MSTR
-
-// MEI_DEBUG_DECODE Register definitions
-#define MEI_DEBUG_DEC_MASK (0x3)
-#define MEI_DEBUG_DEC_AUX_MASK (0x0)
-#define MEI_DEBUG_DEC_DMP1_MASK (0x1)
-#define MEI_DEBUG_DEC_DMP2_MASK (0x2)
-#define MEI_DEBUG_DEC_CORE_MASK (0x3)
-
-#define AUX_STATUS (0x0)
-// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
-// page swap requests.
-#define MEI_TO_ARC_MAILBOX (0xDFD0)
-#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C)
-
-#define ARC_TO_MEI_MAILBOX (0xDFA0)
-#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C)
-
-// Codeswap request messages are indicated by setting BIT31
-#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000)
-
-// Clear Eoc messages received are indicated by setting BIT17
-#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000)
-
-/*
-** Swap page header
-*/
-// Page must be loaded at boot time if size field has BIT31 set
-#define BOOT_FLAG (BIT31)
-#define BOOT_FLAG_MASK ~BOOT_FLAG
-
-#define FREE_RELOAD 1
-#define FREE_SHOWTIME 2
-#define FREE_ALL 3
-
-// marcos
-#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
-#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr)))
-#define SET_BIT(reg, mask) reg |= (mask)
-#define CLEAR_BIT(reg, mask) reg &= (~mask)
-#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask) SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
-
-#define ALIGN_SIZE ( 1L<<10 ) //1K size align
-#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
-
-// swap marco
-#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
-#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
-
-// Swap page header describes size in 32-bit words, load location, and image offset
-// for program and/or data segments
-typedef struct _arc_swp_page_hdr {
- u32 p_offset; //Offset bytes of progseg from beginning of image
- u32 p_dest; //Destination addr of progseg on processor
- u32 p_size; //Size in 32-bitwords of program segment
- u32 d_offset; //Offset bytes of dataseg from beginning of image
- u32 d_dest; //Destination addr of dataseg on processor
- u32 d_size; //Size in 32-bitwords of data segment
-} ARC_SWP_PAGE_HDR;
-
-/*
-** Swap image header
-*/
-#define GET_PROG 0 // Flag used for program mem segment
-#define GET_DATA 1 // Flag used for data mem segment
-
-// Image header contains size of image, checksum for image, and count of
-// page headers. Following that are 'count' page headers followed by
-// the code and/or data segments to be loaded
-typedef struct _arc_img_hdr {
- u32 size; // Size of binary image in bytes
- u32 checksum; // Checksum for image
- u32 count; // Count of swp pages in image
- ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy
-} ARC_IMG_HDR;
-
-typedef struct smmu_mem_info {
- int type;
- unsigned long nCopy;
- unsigned long size;
- unsigned char *address;
- unsigned char *org_address;
-} smmu_mem_info_t;
-
-typedef struct ifxmips_mei_device_private {
- int modem_ready;
- int arcmsgav;
- int cmv_reply;
- int cmv_waiting;
- // Mei to ARC CMV count, reply count, ARC Indicator count
- int indicator_count;
- int cmv_count;
- int reply_count;
- unsigned long image_size;
- int nBar;
- u16 Recent_indicator[MSG_LENGTH];
-
- u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
-
- smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
- ARC_IMG_HDR *img_hdr;
- // to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
- wait_queue_head_t wait_queue_arcmsgav;
- wait_queue_head_t wait_queue_modemready;
- MEI_mutex_t mei_cmv_sema;
-} ifxmips_mei_device_private_t;
-
-#endif //_IFXMIPS_MEI_BSP_H_
+++ /dev/null
-/******************************************************************************
-**
-** FILE NAME : ifxmips_mei_ioctl.h
-** PROJECT : Danube
-** MODULES : MEI
-**
-** DATE : 1 Jan 2006
-** AUTHOR : TC Chen
-** DESCRIPTION : MEI Driver
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Version $Date $Author $Comment
-*******************************************************************************/
-#ifndef _IFXMIPS_MEI_IOCTL_H
-#define _IFXMIPS_MEI_IOCTL_H
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-#define PCM_BUFF_SIZE 1024 //bytes
-// interrupt numbers
-
-#if !(defined(_IFXMIPS_ADSL_APP) || defined (_AMAZON_ADSL_APP))
-
-// Number of intervals
-#define INTERVAL_NUM 192 //two days
-typedef struct ifxmips_mei_mib {
- struct list_head list;
- struct timeval start_time; //start of current interval
-
- int AtucPerfLof;
- int AtucPerfLos;
- int AtucPerfEs;
- int AtucPerfInit;
-
- int AturPerfLof;
- int AturPerfLos;
- int AturPerfLpr;
- int AturPerfEs;
-
- int AturChanPerfRxBlk;
- int AturChanPerfTxBlk;
- int AturChanPerfCorrBlk;
- int AturChanPerfUncorrBlk;
-
- //RFC-3440
- int AtucPerfStatFastR;
- int AtucPerfStatFailedFastR;
- int AtucPerfStatSesL;
- int AtucPerfStatUasL;
- int AturPerfStatSesL;
- int AturPerfStatUasL;
-} ifxmips_mei_mib;
-
-typedef struct adslChanPrevTxRate {
- u32 adslAtucChanPrevTxRate;
- u32 adslAturChanPrevTxRate;
-} adslChanPrevTxRate;
-
-typedef struct adslPhysCurrStatus {
- u32 adslAtucCurrStatus;
- u32 adslAturCurrStatus;
-} adslPhysCurrStatus;
-
-typedef struct ChanType {
- int interleave;
- int fast;
- int bearchannel0;
- int bearchannel1;
-} ChanType;
-
-typedef struct mib_previous_read {
- u16 ATUC_PERF_ESS;
- u16 ATUR_PERF_ESS;
- u32 ATUR_CHAN_RECV_BLK;
- u16 ATUR_CHAN_CORR_BLK_INTL;
- u16 ATUR_CHAN_CORR_BLK_FAST;
- u16 ATUR_CHAN_UNCORR_BLK_INTL;
- u16 ATUR_CHAN_UNCORR_BLK_FAST;
- u16 ATUC_PERF_STAT_FASTR;
- u16 ATUC_PERF_STAT_FAILED_FASTR;
- u16 ATUC_PERF_STAT_SESL;
- u16 ATUC_PERF_STAT_UASL;
- u16 ATUR_PERF_STAT_SESL;
-} mib_previous_read;
-
-typedef struct mib_flags_pretime {
- struct timeval ATUC_PERF_LOSS_PTIME;
- struct timeval ATUC_PERF_LOFS_PTIME;
- struct timeval ATUR_PERF_LOSS_PTIME;
- struct timeval ATUR_PERF_LOFS_PTIME;
- struct timeval ATUR_PERF_LPR_PTIME;
-} mib_flags_pretime;
-
- // cmv message structures
-#define MP_PAYLOAD_SIZE 12
-typedef struct mpmessage {
- u16 iFunction;
- u16 iGroup;
- u16 iAddress;
- u16 iIndex;
- u16 iPayload[MP_PAYLOAD_SIZE];
-} MPMessage;
-#endif
-
-typedef struct meireg {
- u32 iAddress;
- u32 iData;
-} meireg;
-
-#define MEIDEBUG_BUFFER_SIZES 50
-typedef struct meidebug {
- u32 iAddress;
- u32 iCount;
- u32 buffer[MEIDEBUG_BUFFER_SIZES];
-} meidebug;
-
-//==============================================================================
-// Group definitions
-//==============================================================================
-#define OPTN 5
-#define CNFG 8
-#define CNTL 1
-#define STAT 2
-#define RATE 6
-#define PLAM 7
-#define INFO 3
-#define TEST 4
-//==============================================================================
-// Opcode definitions
-//==============================================================================
-#define H2D_CMV_READ 0x00
-#define H2D_CMV_WRITE 0x04
-#define H2D_CMV_INDICATE_REPLY 0x10
-#define H2D_ERROR_OPCODE_UNKNOWN 0x20
-#define H2D_ERROR_CMV_UNKNOWN 0x30
-
-#define D2H_CMV_READ_REPLY 0x01
-#define D2H_CMV_WRITE_REPLY 0x05
-#define D2H_CMV_INDICATE 0x11
-#define D2H_ERROR_OPCODE_UNKNOWN 0x21
-#define D2H_ERROR_CMV_UNKNOWN 0x31
-#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41
-#define D2H_ERROR_CMV_WRITE_ONLY 0x51
-#define D2H_ERROR_CMV_READ_ONLY 0x61
-
-#define H2D_DEBUG_READ_DM 0x02
-#define H2D_DEBUG_READ_PM 0x06
-#define H2D_DEBUG_WRITE_DM 0x0a
-#define H2D_DEBUG_WRITE_PM 0x0e
-
-#define D2H_DEBUG_READ_DM_REPLY 0x03
-#define D2H_DEBUG_READ_FM_REPLY 0x07
-#define D2H_DEBUG_WRITE_DM_REPLY 0x0b
-#define D2H_DEBUG_WRITE_FM_REPLY 0x0f
-#define D2H_ERROR_ADDR_UNKNOWN 0x33
-
-#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1
-//==============================================================================
-// INFO register address field definitions
-//==============================================================================
-
-#define INFO_TxState 0
-#define INFO_RxState 1
-#define INFO_TxNextState 2
-#define INFO_RxNextState 3
-#define INFO_TxStateJumpFrom 4
-#define INFO_RxStateJumpFrom 5
-
-#define INFO_ReverbSnrBuf 8
-#define INFO_ReverbEchoSnrBuf 9
-#define INFO_MedleySnrBuf 10
-#define INFO_RxShowtimeSnrBuf 11
-#define INFO_DECdelay 12
-#define INFO_DECExponent 13
-#define INFO_DECTaps 14
-#define INFO_AECdelay 15
-#define INFO_AECExponent 16
-#define INFO_AECTaps 17
-#define INFO_TDQExponent 18
-#define INFO_TDQTaps 19
-#define INFO_FDQExponent 20
-#define INFO_FDQTaps 21
-#define INFO_USBat 22
-#define INFO_DSBat 23
-#define INFO_USFineGains 24
-#define INFO_DSFineGains 25
-#define INFO_BitloadFirstChannel 26
-#define INFO_BitloadLastChannel 27
-#define INFO_PollEOCData 28 // CO specific
-#define INFO_CSNRMargin 29 // CO specific
-#define INFO_RCMsgs1 30
-#define INFO_RMsgs1 31
-#define INFO_RMsgRA 32
-#define INFO_RCMsgRA 33
-#define INFO_RMsg2 34
-#define INFO_RCMsg2 35
-#define INFO_BitLoadOK 36
-#define INFO_RCRates1 37
-#define INFO_RRates1Tab 38
-#define INFO_RMsgs1Tab 39
-#define INFO_RMsgRATab 40
-#define INFO_RRatesRA 41
-#define INFO_RCRatesRA 42
-#define INFO_RRates2 43
-#define INFO_RCRates2 44
-#define INFO_PackedRMsg2 45
-#define INFO_RxBitSwapFlag 46
-#define INFO_TxBitSwapFlag 47
-#define INFO_ShowtimeSNRUpdateCount 48
-#define INFO_ShowtimeFDQUpdateCount 49
-#define INFO_ShowtimeDECUpdateCount 50
-#define INFO_CopyRxBuffer 51
-#define INFO_RxToneBuf 52
-#define INFO_TxToneBuf 53
-#define INFO_Version 54
-#define INFO_TimeStamp 55
-#define INFO_feVendorID 56
-#define INFO_feSerialNum 57
-#define INFO_feVersionNum 58
-#define INFO_BulkMemory 59 //Points to start of bulk memory
-#define INFO_neVendorID 60
-#define INFO_neVersionNum 61
-#define INFO_neSerialNum 62
-
-//==============================================================================
-// RATE register address field definitions
-//==============================================================================
-
-#define RATE_UsRate 0
-#define RATE_DsRate 1
-
-//==============================================================================
-// PLAM (Physical Layer Management) register address field definitions
-// (See G997.1 for reference)
-//==============================================================================
-
- // ///
- // Failure Flags ///
- // ///
-
-#define PLAM_NearEndFailureFlags 0
-#define PLAM_FarEndFailureFlags 1
-
- // ///
- // Near End Failure Flags Bit Definitions ///
- // ///
-
-// ADSL Failures ///
-#define PLAM_LOS_FailureBit 0x0001
-#define PLAM_LOF_FailureBit 0x0002
-#define PLAM_LPR_FailureBit 0x0004
-#define PLAM_RFI_FailureBit 0x0008
-
-// ATM Failures ///
-#define PLAM_NCD_LP0_FailureBit 0x0010
-#define PLAM_NCD_LP1_FailureBit 0x0020
-#define PLAM_LCD_LP0_FailureBit 0x0040
-#define PLAM_LCD_LP1_FailureBit 0x0080
-
-#define PLAM_NCD_BC0_FailureBit 0x0100
-#define PLAM_NCD_BC1_FailureBit 0x0200
-#define PLAM_LCD_BC0_FailureBit 0x0400
-#define PLAM_LCD_BC1_FailureBit 0x0800
- // ///
- // Performance Counts ///
- // ///
-
-#define PLAM_NearEndCrcCnt 2
-#define PLAM_CorrectedRSErrors 3
-
-#define PLAM_NearEndECSCnt 6
-#define PLAM_NearEndESCnt 7
-#define PLAM_NearEndSESCnt 8
-#define PLAM_NearEndLOSSCnt 9
-#define PLAM_NearEndUASLCnt 10
-
-#define PLAM_NearEndHECErrCnt 11
-
-#define PLAM_NearEndHECTotCnt 16
-#define PLAM_NearEndCellTotCnt 18
-#define PLAM_NearEndSfCntLSW 20
-#define PLAM_NearEndSfCntMSW 21
-
-#define PLAM_FarEndFebeCnt 24
-
-#define PLAM_FarEndFecCnt 28
-
-#define PLAM_FarEndFECSCnt 32
-#define PLAM_FarEndESCnt 33
-#define PLAM_FarEndSESCnt 34
-#define PLAM_FarEndLOSSCnt 35
-#define PLAM_FarEndUASLCnt 36
-
-#define PLAM_FarEndHECErrCnt 37
-
-#define PLAM_FarEndHECTotCnt 41
-
-#define PLAM_FarEndCellTotCnt 43
-
-#define PLAM_SNRMargin_0_1db 45
-
-#define PLAM_SNRMargin 46
-
-//==============================================================================
-// CNTL register address and bit field definitions
-//==============================================================================
-
-#define CNTL_ModemControl 0
-
-#define CNTL_ModemReset 0x0
-#define CNTL_ModemStart 0x2
-
-//==============================================================================
-// STAT register address and bit field definitions
-//==============================================================================
-
-#define STAT_MacroState 0
-#define STAT_Mode 1
-#define STAT_DMTFramingMode 2
-#define STAT_SleepState 3
-#define STAT_Misc 4
-#define STAT_FailureState 5
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_OLRStatus provides status of OLR
- //16-bit STAT_OLRStatus_DS
- // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
- // [3:2]: Reserved
- // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA)
- // [7:6]: Reserved
- // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits).
- // [11]: 1=Receive Response, 0=not
- // [15:12]: Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_OLRStatus_DS 6
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_OLRStatus provides status of OLR
- // 16-bit STAT_OLRStatus_US CMV
- // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
- // [3:2]: Reserved
- // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA)
- // [7:6]: Reserved
- // [8]: 1=Request Received. 0=not.
- // [10:9]: Reserved
- // [11]: 1=Response Sent, 0=not
- // [15:12]: Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-///
-#define STAT_OLRStatus_US 7
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_PMStatus provides status of PM
- // 16-bit STAT_PMStatus CMV
- // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted
- // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM
- // [3]: Reserved
- // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim)
- // [7:6]: Reserved
- // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits).
- // [11]: 1=Response, 0=not
- // [15:12]: Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_PMStatus 8
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError
- // [3:0]: OLR/PM response reason code
- // [7:4]: OLR/PM Internal error code
- // [15:8]: OLR/PM Reserved for future
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_OLRError_DS 9
-#define STAT_OLRError_US 10
-#define STAT_PMError 11
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_MacroState
-// MacroState reflects the high level state of the modem
-
-#define STAT_InitState 0x0000
-#define STAT_ReadyState 0x0001
-#define STAT_FailState 0x0002
-#define STAT_IdleState 0x0003
-#define STAT_QuietState 0x0004
-#define STAT_GhsState 0x0005
-#define STAT_FullInitState 0x0006
-#define STAT_ShowTimeState 0x0007
-#define STAT_FastRetrainState 0x0008
-#define STAT_LoopDiagMode 0x0009
-#define STAT_ShortInit 0x000A // Bis short initialization ///
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_Mode
-// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use
-// G.Hs or some other mechanism to negotiate the specific mode of operation.
-// The OPTN_modeControl CMV is used to select a set of desired modes.
-// The STAT_Mode CMV indicates which mode was actually selected.
-
-#define STAT_ConfigMode_T1413 0x0001
-#define STAT_ConfigMode_G992_2_AB 0x0002
-#define STAT_ConfigMode_G992_1_A 0x0004
-#define STAT_ConfigMode_G992_1_B 0x0008
-#define STAT_ConfigMode_G992_1_C 0x0010
-#define STAT_ConfigMode_G992_2_C 0x0020
-
-#define STAT_ConfigMode_G992_3_A 0x0100
-#define STAT_ConfigMode_G992_3_B 0x0200
-#define STAT_ConfigMode_G992_3_I 0x0400
-#define STAT_ConfigMode_G992_3_J 0x0800
-#define STAT_ConfigMode_G992_3_L 0x1000
-
-#define STAT_ConfigMode_G992_4_A 0x2000
-#define STAT_ConfigMode_G992_4_I 0x4000
-
-#define STAT_ConfigMode_G992_5 0x8000
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_DMTFramingMode
-// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode
-// status is not applicable in BIS mode and its value is undefined
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_FramingModeMask 0x0003
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_Misc
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_OverlappedSpectrum 0x0008
-#define STAT_TCM 0x0010
-#define STAT_TDQ_at_1104 0x0020
-#define STAT_T1413_Signal_Detected 0x0040
-#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1
-#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_FailureState
-// when the MacroSTate indicates the fail state, FailureState provides a failure code
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define E_CODE_NO_ERROR 0
-#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */
-#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */
-#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */
-#define E_CODE_TX_AOC_FIFO_OVERFLOW 4
-#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/
-#define E_CODE_BITLOAD 6 // bit loading fails */
-#define E_CODE_ST_ERROR 7 // showtime CRC error */
-#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */
-#define E_CODE_C_TONES 9 // detected C_TONES */
-#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */
-#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */
-#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */
-#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */
-#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */
-#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */
-#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */
-#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */
-#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */
-#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */
-#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */
-#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */
-#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */
-#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */
-#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */
-#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */
-#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */
-#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */
-#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */
-#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */
-#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */
-#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */
-#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */
-#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */
-#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */
-#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */
-#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */
-#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */
-#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */
-#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */
-#define E_CODE_BAD_MEM_ACCESS 46
-#define E_CODE_BAD_INSTRUCTION_ACCESS 47
-#define E_CODE_TX_EOC_FIFO_OVERFLOW 48
-#define E_CODE_RX_EOC_FIFO_OVERFLOW 49
-#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//STAT_OLRStatus:
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_OLRPM_IDLE 0x0000
-#define STAT_OLRPM_IN_PROGRESS 0x0001
-#define STAT_OLRPM_COMPLETE 0x0002
-#define STAT_OLRPM_ABORTED 0x0003
-#define STAT_OLRPM_RESPONSE 0x0800
-
-#define STAT_OLR_BITSWAP 0x0010
-#define STAT_OLR_DRR 0x0020
-#define STAT_OLR_SRA 0x0030
-
-//STAT_PMStatus_US:
-#define STAT_PM_CO_REQ 0x0004
-#define STAT_PM_SIMPLE_REQ 0x0010
-#define STAT_PM_L2_REQ 0x0020
-#define STAT_PM_L2_TRIM_REQ 0x0030
-
-// STAT_OLRError_DS, STAT_OLRError_US
-//4 bit response reason code:
-#define RESP_BUSY 0x01
-#define RESP_INVALID_PARAMETERS 0x02
-#define RESP_NOT_ENABLED 0x03
-#define RESP_NOT_SUPPORTED 0x04
-
-//4 bit internal error code (common for OLR and PM)
-#define REQ_INVALID_BiGi 0x10
-#define REQ_INVALID_Lp 0x20
-#define REQ_INVALID_Bpn 0x30
-#define REQ_INVALID_FRAMING_CONSTRAINT 0x40
-#define REQ_NOT_IN_L0_STATE 0x50
-#define REQ_NOT_IN_L2_STATE 0x60
-#define REQ_INVALID_PCB 0x70
-#define REQ_VIOLATES_MARGIN 0x80
-
-//STAT_PMError
-//4 bit response reason code:
-#define RESP_STATE_NOT_DESIRED 0x03
-#define RESP_INFEASIBLE_PARAMETERS 0x04
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN register address and bit field definitions
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_ModeControl 0
-#define OPTN_DMTLnkCtl 1
-// Reserved 2
-#define OPTN_GhsControl 3
-// Reserved 4
-#define OPTN_PwrManControl 5
-#define OPTN_AnnexControl 6
-#define OPTN_ModeControl1 7
-// Reserved 8
-#define OPTN_StateMachineCtrl 9
-// Reserved 10
-// Reserved 11
-#define OPTN_BisLinkControl 12
-#define OPTN_ATMAddrConfig 13
-#define OPTN_ATMNumCellConfig 14
-
-// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may ///
-// use G.Hs or some other mechanism to negotiate the specific mode of operation. ///
-// The OPTN_ModeControl CMV is used to select a set of desired modes ///
-// The STAT_ModeControl CMV indicates which mode was actually selected ///
-
-// OPTN_ModeControl
-#define OPTN_ConfigMode_T1413 0x0001
-#define OPTN_ConfigMode_G992_2_AB 0x0002
-#define OPTN_ConfigMode_G992_1_A 0x0004
-#define OPTN_ConfigMode_G992_1_B 0x0008
-#define OPTN_ConfigMode_G992_1_C 0x0010
-#define OPTN_ConfigMode_G992_2_C 0x0020
-
-#define OPTN_ConfigMode_G992_3_A 0x0100
-#define OPTN_ConfigMode_G992_3_B 0x0200
-#define OPTN_ConfigMode_G992_3_I 0x0400
-#define OPTN_ConfigMode_G992_3_J 0x0800
-#define OPTN_ConfigMode_G992_3_L 0x1000
-
-#define OPTN_ConfigMode_G992_4_A 0x2000
-#define OPTN_ConfigMode_G992_4_I 0x4000
-
-#define OPTN_ConfigMode_G992_5 0x8000
-
-// OPTN_PwrManControl
-#define OPTN_PwrManWakeUpGhs 0x1
-#define OPTN_PwrManWakeUpFR 0x2
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_DMT Link Control
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define OPTN_DMT_DualLatency_Dis 0x200
-#define OPTN_DMT_S_Dis 0x100
-#define OPTN_DMT_FRAMINGMODE 0x1
-#define OPTN_DMT_FRAMINGMODE_MASK 0x7
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_BIS Link Control
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define OPTN_BisLinkContrl_LineProbeDis 0x1
-#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2
-#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_GhsControl
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//
-// for OPTN_GhsControl, we will assign 16bit word as follows
-// bit 0~3: set the control over which start(initial) message CPE will send:
-//
-// BIT: 2 1 0
-// 0 0 1 CLR
-// 0 1 0 MR
-// 0 1 1 MS
-// 1 0 0 MP
-//
-// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange
-// BIT: 5 4
-// 0 1 MS
-// 1 0 MR
-// 1 1 MP
-//
-// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default.
-// BIT: 15
-// 1 means session one
-//
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_GHS_ST_GHS 0x8000
-#define OPTN_GHS_INIT_MASK 0x000F
-#define OPTN_GHS_RESP_MASK 0x00F0
-
-#define OPTN_RTInitTxMsg_CLR 0x0001
-#define OPTN_RTInitTxMsg_MR 0x0002
-#define OPTN_RTInitTxMsg_MS 0x0003
-#define OPTN_RTInitTxMsg_MP 0x0004
-
-#define OPTN_RTRespTxMsg_MS 0x0010
-#define OPTN_RTRespTxMsg_MR 0x0020
-#define OPTN_RTRespTxMsg_MP 0x0030
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_AnnexControl
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-// G.992.3 Annex A/L1/L2 US PSD Mask preferred
-
-#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000
-#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask ///
-#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask ///
-#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask ///
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//OPTN_ATMAddrConfig
-// Bits 4:0 are Utopia address for BC1
-// Bits 9:5 are Utopia address for BC0
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_UTPADDR_BC1 0x001F
-#define OPTN_UTPADDR_BC0 0x03E0
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//OPTN_ATMNumCellConfig
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 ///
-#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 ///
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// CNFG register address field ///
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////
-// these cmvs are used by bis handshake ///
-///////////////////////////////////////////
-
-// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t)
-#define CNFG_TPS_TC_DS0 0
-#define CNFG_TPS_TC_DS1 1
-#define CNFG_TPS_TC_US0 2
-#define CNFG_TPS_TC_US1 3
-
-#define CNFG_HDLC_Overhead_Requirements 4
-
-// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t)
-#define CNFG_PMS_TC_DS0 5
-#define CNFG_PMS_TC_DS1 6
-#define CNFG_PMS_TC_US0 7
-#define CNFG_PMS_TC_US1 8
-
-// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t)
-#define CNFG_PMD_PARAMETERS 9
-
-////////////////////////////////////////////////////////////
-// these cmvs are used by bis training and showtime code ///
-////////////////////////////////////////////////////////////
-
-////////////////
-// Tx Config ///
-////////////////
-#define CNFG_tx_Cnfg_Nbc 10
-#define CNFG_tx_Cnfg_Nlp 11
-#define CNFG_tx_Cnfg_Rp 12
-#define CNFG_tx_Cnfg_Mp 13
-#define CNFG_tx_Cnfg_Lp 14
-#define CNFG_tx_Cnfg_Tp 15
-#define CNFG_tx_Cnfg_Dp 16
-#define CNFG_tx_Cnfg_Bpn 17
-#define CNFG_tx_Cnfg_FramingMode 18
-#define CNFG_tx_Cnfg_MSGLp 19
-#define CNFG_tx_Cnfg_MSGc 20
-
-////////////////
-// Rx Config ///
-////////////////
-#define CNFG_rx_Cnfg_Nbc 21
-#define CNFG_rx_Cnfg_Nlp 22
-#define CNFG_rx_Cnfg_Rp 23
-#define CNFG_rx_Cnfg_Mp 24
-#define CNFG_rx_Cnfg_Lp 25
-#define CNFG_rx_Cnfg_Tp 26
-#define CNFG_rx_Cnfg_Dp 27
-#define CNFG_rx_Cnfg_Bpn 28
-#define CNFG_rx_Cnfg_FramingMode 29
-#define CNFG_rx_Cnfg_MSGLp 30
-#define CNFG_rx_Cnfg_MSGc 31
-
-#define CNFG_tx_Cnfg_BCnToLPp 32
-#define CNFG_rx_Cnfg_BCnToLPp 33
-
-#endif
+++ /dev/null
-/******************************************************************************
-**
-** FILE NAME : ifxmips_mei_linux.h
-** PROJECT : Danube
-** MODULES : MEI
-**
-** DATE : 1 Jan 2006
-** AUTHOR : TC Chen
-** DESCRIPTION : MEI Driver
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Version $Date $Author $Comment
-*******************************************************************************/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <asm/semaphore.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/uaccess.h>
-
-#undef CONFIG_DEVFS_FS //165204:henryhsu devfs will make mei open file fail.
-
-#ifdef CONFIG_DEVFS_FS
-#include <linux/devfs_fs_kernel.h>
-#endif
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
-#endif
-
-#include <linux/list.h>
-#include <linux/delay.h>
-#define __LINUX__
-
-#ifdef CONFIG_PROC_FS
-#define PROC_ITEMS 8
-#define MEI_DIRNAME "mei"
-#endif
-
-#include <asm/ifxmips/ifxmips.h>
-#include <asm/ifxmips/ifxmips_irq.h>
-#include <asm/ifxmips/ifxmips_mei.h>
-#include <asm/ifxmips/ifxmips_mei_app.h>
-#include <asm/ifxmips/ifxmips_mei_ioctl.h>
-#include <asm/ifxmips/ifxmips_mei_app_ioctl.h>
-#include <asm/ifxmips/ifxmips_gpio.h>
-#include <asm/ifxmips/ifxmips_led.h>
-#include <asm/ifxmips/ifxmips_irq.h>
-
-#ifdef CONFIG_DEVFS_FS
-#define IFXMIPS_DEVNAME "ifxmips"
-#endif //ifdef CONFIG_DEVFS_FS
-
-#define MEI_LOCKINT(var) \
- local_save_flags(var);\
- local_irq_disable()
-#define MEI_UNLOCKINT(var) \
- local_irq_restore(var)
-
-#define MEI_MUTEX_INIT(id,flag) \
- sema_init(&id,flag)
-#define MEI_MUTEX_LOCK(id) \
- down_interruptible(&id)
-#define MEI_MUTEX_UNLOCK(id) \
- up(&id)
-
-#define MEI_MASK_AND_ACK_IRQ \
- ifxmips_mask_and_ack_irq
-
-#define MEI_DISABLE_IRQ \
- disable_irq
-#define MEI_ENABLE_IRQ \
- enable_irq
-
-#define MEI_WAIT(ms) \
- {\
- set_current_state(TASK_INTERRUPTIBLE);\
- schedule_timeout(ms);\
- }
-
-#define MEI_INIT_WAKELIST(name,queue) \
- init_waitqueue_head(&queue)
-
-#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\
- interruptible_sleep_on_timeout(&ev,timeout)
-
-#define MEI_WAIT_EVENT(ev)\
- interruptible_sleep_on(&ev)
-#define MEI_WAKEUP_EVENT(ev)\
- wake_up_interruptible(&ev)
-
-typedef unsigned long MEI_intstat_t;
-typedef struct semaphore MEI_mutex_t;
-typedef struct file MEI_file_t;
-typedef struct inode MEI_inode_t;
-
-extern void mask_and_ack_ifxmips_irq (unsigned int irq_nr);
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_PMU_H__
-#define _IFXMIPS_PMU_H__
-
-#define IFXMIPS_PMU_PWDCR_DMA 0x20
-#define IFXMIPS_PMU_PWDCR_LED 0x800
-#define IFXMIPS_PMU_PWDCR_GPT 0x1000
-#define IFXMIPS_PMU_PWDCR_PPE 0x2000
-#define IFXMIPS_PMU_PWDCR_FPI 0x4000
-
-void ifxmips_pmu_enable(unsigned int module);
-void ifxmips_pmu_disable(unsigned int module);
-
-#endif
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXPROM_H__
-#define _IFXPROM_H__
-
-extern void prom_printf(const char *fmt, ...);
-extern u32 *prom_get_cp1_base(void);
-extern u32 prom_get_cp1_size(void);
-extern int ifxmips_has_brn_block(void);
-
-#endif
+++ /dev/null
-/*
- * include/asm-mips/mach-ifxmips/gpio.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#ifndef _IFXMIPS_GPIO_H_
-#define _IFXMIPS_GPIO_H_
-
-#include <asm/ifxmips/ifxmips.h>
-#include <asm/ifxmips/ifxmips_gpio.h>
-
-#define GPIO_TO_PORT(x) ((x > 15) ? (1) : (0))
-#define GPIO_TO_GPIO(x) ((x > 15) ? (x-16) : (x))
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- ifxmips_port_set_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- ifxmips_port_set_dir_in(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- ifxmips_port_clear_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- ifxmips_port_set_dir_out(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- return 0;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- ifxmips_port_get_input(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- return 0;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (value)
- ifxmips_port_set_output(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
- else
- ifxmips_port_clear_output(GPIO_TO_PORT(gpio),
- GPIO_TO_GPIO(gpio));
-}
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return 0;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return 0;
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return 0;
-}
-
-static inline int gpio_get_value_cansleep(unsigned gpio)
-{
- might_sleep();
- return gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value_cansleep(unsigned gpio, int value)
-{
- might_sleep();
- gpio_set_value(gpio, value);
-}
-
-static inline int gpio_is_valid(int number)
-{
- return ((unsigned)number) < 8;
-}
-
-#endif
+++ /dev/null
-/*
- * include/asm-mips/mach-ifxmips/irq.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#ifndef __IFXMIPS_IRQ_H
-#define __IFXMIPS_IRQ_H
-
-#define NR_IRQS 256
-#include_next <irq.h>
-
-#endif
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#ifndef __ASM_MIPS_MACH_IFXMIPS_WAR_H
-#define __ASM_MIPS_MACH_IFXMIPS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define RM9000_CDEX_SMP_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif
+++ /dev/null
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1484,7 +1484,16 @@ void __cpuinit per_cpu_trap_init(void)
- */
- if (cpu_has_mips_r2) {
- cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+ if (!cp0_compare_irq)
-+ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
- cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-+ if (!cp0_perfcount_irq)
-+ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+ if (arch_fixup_c0_irqs)
-+ arch_fixup_c0_irqs();
-+
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
- } else {
---- a/include/asm-mips/irq.h
-+++ b/include/asm-mips/irq.h
-@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq)
- * IE7. Since R2 their number has to be read from the c0_intctl register.
- */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
-
- extern int cp0_compare_irq;
- extern int cp0_perfcount_irq;
-
-+extern void __weak arch_fixup_c0_irqs(void);
-+
-+
- #endif /* _ASM_IRQ_H */
+++ /dev/null
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -21,6 +21,22 @@
-
- #ifndef CONFIG_MIPS_MT_SMTC
-
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register. 4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+ do { \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ } while (0)
-+
- static int mips_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
-@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
-+ compare_change_hazard();
- res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
- return res;
- }
+++ /dev/null
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -78,6 +78,23 @@ config MIPS_COBALT
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
-
-+config IFXMIPS
-+ bool "Infineon Twinpass, Danube, Amazon-SE"
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_MULTITHREADING
-+ select SYS_HAS_EARLY_PRINTK
-+ select HW_HAS_PCI
-+ select GENERIC_GPIO
-+ select SWAP_IO_SPACE
-+
- config MACH_DECSTATION
- bool "DECstations"
- select BOOT_ELF32
-@@ -607,6 +624,7 @@ source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
- source "arch/mips/txx9/Kconfig"
- source "arch/mips/vr41xx/Kconfig"
-+source "arch/mips/ifxmips/Kconfig"
-
- endmenu
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -283,6 +283,13 @@ cflags-$(CONFIG_MIPS_COBALT) += -Iinclud
- load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
-
- #
-+# Infineon IFXMIPS
-+#
-+core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/
-+cflags-$(CONFIG_IFXMIPS) += -Iinclude/asm-mips/mach-ifxmips
-+load-$(CONFIG_IFXMIPS) += 0xffffffff80002000
-+
-+#
- # DECstation family
- #
- core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -57,6 +57,12 @@
- #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
- #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
-
-+/*
-+ * Valid machtype for group IFXMIPS
-+ */
-+#define MACH_GROUP_IFXMIPS 29
-+#define MACH_INFINEON_IFXMIPS 0
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- extern char *system_type;
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -51,3 +51,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc
- obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
-+obj-$(CONFIG_IFXMIPS) += pci-ifxmips.o ops-ifxmips.o
+++ /dev/null
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -112,6 +112,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
- obj-$(CONFIG_JS_RTC) += js-rtc.o
- js-rtc-y = rtc.o
-
-+obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o
-+obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o
-+obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o
-+
- # Files generated that shall be removed upon make clean
- clean-files := consolemap_deftbl.c defkeymap.c
-
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_MTD_WALNUT) += walnu
- obj-$(CONFIG_MTD_H720X) += h720x-flash.o
- obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
- obj-$(CONFIG_MTD_NOR_TOTO) += omap-toto-flash.o
-+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o
- obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
- obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
- obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -343,6 +343,12 @@ config MACB
-
- source "drivers/net/arm/Kconfig"
-
-+config IFXMIPS_MII0
-+ tristate "Infineon IFXMips eth0 driver"
-+ depends on IFXMIPS
-+ help
-+ Support for the MII0 inside the IFXMips SOC
-+
- config AX88796
- tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS || SUPERH
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1353,6 +1353,14 @@ config SERIAL_OF_PLATFORM
- Currently, only 8250 compatible ports are supported, but
- others can easily be added.
-
-+config SERIAL_IFXMIPS
-+ bool "IFXMips serial driver"
-+ depends on IFXMIPS
-+ select SERIAL_CORE
-+ select SERIAL_CORE_CONSOLE
-+ help
-+ Driver for the ifxmipss built in ASC hardware
-+
- config SERIAL_QE
- tristate "Freescale QUICC Engine serial port support"
- depends on QUICC_ENGINE
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -69,3 +69,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -102,6 +102,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
-
- # PARISC Architecture
-
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
- obj-$(CONFIG_NIU) += niu.o
- obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
--
-+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
- If you say N, all options in this submenu will be skipped and disabled.
-
- if CRYPTO_HW
-+config CRYPTO_DEV_IFXMIPS
-+ tristate "Support for IFXMIPS Data Encryption Unit"
-+ depends on IFXMIPS
-
- config CRYPTO_DEV_PADLOCK
- tristate "Support for VIA PadLock ACE"
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
- obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
- obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
-+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597
- help
- This driver enables support for the on-chip R8A66597 in the
- SH7366 and SH7723 processors.
-+
-+config USB_DWC_HCD
-+ tristate "IFXMIPS USB Host Controller Driver"
-+ depends on USB && IFXMIPS
-+ default y
-+ help
-+ Danube USB Host Controller
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -169,6 +169,12 @@ config LEDS_PCA955X
- LED driver chips accessed via the I2C bus. Supported
- devices include PCA9550, PCA9551, PCA9552, and PCA9553.
-
-+config LEDS_IFXMIPS
-+ tristate "LED Support for IFXMIPS LEDs"
-+ depends on LEDS_CLASS && IFXMIPS
-+ help
-+ This option enables support for the CM-X270 LEDs.
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-c
- obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
- obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
- obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
-+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -704,6 +704,12 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config IFXMIPS_WDT
-+ bool "IFXMips watchdog"
-+ depends on IFXMIPS
-+ help
-+ Hardware driver for the IFXMIPS Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1025,7 +1025,9 @@ static int __xipram do_write_oneword(str
- int retry_cnt = 0;
-
- adr += chip->start;
--
-+#ifdef CONFIG_IFXMIPS
-+ adr ^= 2;
-+#endif
- spin_lock(chip->mutex);
- ret = get_chip(map, chip, adr, FL_WRITING);
- if (ret) {
+++ /dev/null
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -51,6 +51,8 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT */
-
+++ /dev/null
---- a/kernel/irq/chip.c
-+++ b/kernel/irq/chip.c
-@@ -526,6 +526,9 @@ handle_percpu_irq(unsigned int irq, stru
-
- kstat_this_cpu.irqs[irq]++;
-
-+ if (unlikely(!desc->action || (desc->status & IRQ_DISABLED)))
-+ return;
-+
- if (desc->chip->ack)
- desc->chip->ack(irq);
-
+++ /dev/null
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1514,7 +1514,16 @@ void __cpuinit per_cpu_trap_init(void)
- */
- if (cpu_has_mips_r2) {
- cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+ if (!cp0_compare_irq)
-+ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
- cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-+ if (!cp0_perfcount_irq)
-+ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+ if (arch_fixup_c0_irqs)
-+ arch_fixup_c0_irqs();
-+
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
- } else {
---- a/arch/mips/include/asm/irq.h
-+++ b/arch/mips/include/asm/irq.h
-@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq)
- * IE7. Since R2 their number has to be read from the c0_intctl register.
- */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
-
- extern int cp0_compare_irq;
- extern int cp0_perfcount_irq;
-
-+extern void __weak arch_fixup_c0_irqs(void);
-+
-+
- #endif /* _ASM_IRQ_H */
+++ /dev/null
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -21,6 +21,22 @@
-
- #ifndef CONFIG_MIPS_MT_SMTC
-
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register. 4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+ do { \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ } while (0)
-+
- static int mips_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
-@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
-+ compare_change_hazard();
- res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
- return res;
- }
+++ /dev/null
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -79,6 +79,22 @@ config MIPS_COBALT
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
-
-+config IFXMIPS
-+ bool "Infineon Twinpass, Danube, Amazon-SE"
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_HAS_EARLY_PRINTK
-+ select HW_HAS_PCI
-+ select GENERIC_GPIO
-+ select SWAP_IO_SPACE
-+ select GENERIC_HARDIRQS_NO__DO_IRQ
-+
- config MACH_DECSTATION
- bool "DECstations"
- select BOOT_ELF32
-@@ -607,6 +623,7 @@ source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
- source "arch/mips/txx9/Kconfig"
- source "arch/mips/vr41xx/Kconfig"
-+source "arch/mips/ifxmips/Kconfig"
-
- endmenu
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -285,6 +285,13 @@ cflags-$(CONFIG_MIPS_COBALT) += -I$(srct
- load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
-
- #
-+# Infineon IFXMIPS
-+#
-+core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/
-+cflags-$(CONFIG_IFXMIPS) += -I$(srctree)/arch/mips/include/asm/mach-ifxmips
-+load-$(CONFIG_IFXMIPS) += 0xffffffff80002000
-+
-+#
- # DECstation family
- #
- core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/
---- a/arch/mips/include/asm/bootinfo.h
-+++ b/arch/mips/include/asm/bootinfo.h
-@@ -57,6 +57,12 @@
- #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
- #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
-
-+/*
-+ * Valid machtype for group IFXMIPS
-+ */
-+#define MACH_GROUP_IFXMIPS 29
-+#define MACH_INFINEON_IFXMIPS 0
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- extern char *system_type;
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -52,3 +52,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc
- obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
-+obj-$(CONFIG_IFXMIPS) += pci-ifxmips.o ops-ifxmips.o
+++ /dev/null
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -110,6 +110,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
- obj-$(CONFIG_JS_RTC) += js-rtc.o
- js-rtc-y = rtc.o
-
-+obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o
-+obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o
-+obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o
-+
- # Files generated that shall be removed upon make clean
- clean-files := consolemap_deftbl.c defkeymap.c
-
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_MTD_NETtel) += nettel.o
- obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
- obj-$(CONFIG_MTD_H720X) += h720x-flash.o
- obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
-+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o
- obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
- obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
- obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -343,6 +343,12 @@ config MACB
-
- source "drivers/net/arm/Kconfig"
-
-+config IFXMIPS_MII0
-+ tristate "Infineon IFXMips eth0 driver"
-+ depends on IFXMIPS
-+ help
-+ Support for the MII0 inside the IFXMips SOC
-+
- config AX88796
- tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS || SUPERH
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1304,6 +1304,14 @@ config SERIAL_OF_PLATFORM
- Currently, only 8250 compatible ports are supported, but
- others can easily be added.
-
-+config SERIAL_IFXMIPS
-+ bool "IFXMips serial driver"
-+ depends on IFXMIPS
-+ select SERIAL_CORE
-+ select SERIAL_CORE_CONSOLE
-+ help
-+ Driver for the ifxmipss built in ASC hardware
-+
- config SERIAL_QE
- tristate "Freescale QUICC Engine serial port support"
- depends on QUICC_ENGINE
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -73,3 +73,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
-
- # PARISC Architecture
-
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -262,4 +262,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
- obj-$(CONFIG_NIU) += niu.o
- obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
--
-+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
- If you say N, all options in this submenu will be skipped and disabled.
-
- if CRYPTO_HW
-+config CRYPTO_DEV_IFXMIPS
-+ tristate "Support for IFXMIPS Data Encryption Unit"
-+ depends on IFXMIPS
-
- config CRYPTO_DEV_PADLOCK
- tristate "Support for VIA PadLock ACE"
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
- obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
- obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
-+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -321,3 +321,10 @@ config USB_HWA_HCD
-
- To compile this driver a module, choose M here: the module
- will be called "hwa-hc".
-+
-+config USB_DWC_HCD
-+ tristate "IFXMIPS USB Host Controller Driver"
-+ depends on USB && IFXMIPS
-+ default y
-+ help
-+ Danube USB Host Controller
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -171,6 +171,12 @@ config LEDS_DA903X
- This option enables support for on-chip LED drivers found
- on Dialog Semiconductor DA9030/DA9034 PMICs.
-
-+config LEDS_IFXMIPS
-+ tristate "LED Support for IFXMIPS LEDs"
-+ depends on LEDS_CLASS && IFXMIPS
-+ help
-+ This option enables support for the IFXMIPS LEDs.
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
- obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
- obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
- obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o
-+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -747,6 +747,12 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config IFXMIPS_WDT
-+ bool "IFXMips watchdog"
-+ depends on IFXMIPS
-+ help
-+ Hardware driver for the IFXMIPS Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1069,7 +1069,9 @@ static int __xipram do_write_oneword(str
- int retry_cnt = 0;
-
- adr += chip->start;
--
-+#ifdef CONFIG_IFXMIPS
-+ adr ^= 2;
-+#endif
- spin_lock(chip->mutex);
- ret = get_chip(map, chip, adr, FL_WRITING);
- if (ret) {
+++ /dev/null
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -51,6 +51,8 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT */
-
+++ /dev/null
---- a/kernel/irq/chip.c
-+++ b/kernel/irq/chip.c
-@@ -524,6 +524,9 @@ handle_percpu_irq(unsigned int irq, stru
-
- kstat_incr_irqs_this_cpu(irq, desc);
-
-+ if (unlikely(!desc->action || (desc->status & IRQ_DISABLED)))
-+ return;
-+
- if (desc->chip->ack)
- desc->chip->ack(irq);
-
--- /dev/null
+Index: linux-2.6.30.5/arch/mips/kernel/traps.c
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/kernel/traps.c 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/arch/mips/kernel/traps.c 2009-09-02 18:23:37.000000000 +0200
+@@ -1542,7 +1542,16 @@
+ */
+ if (cpu_has_mips_r2) {
+ cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
++ if (!cp0_compare_irq)
++ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
++
+ cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
++ if (!cp0_perfcount_irq)
++ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
++
++ if (arch_fixup_c0_irqs)
++ arch_fixup_c0_irqs();
++
+ if (cp0_perfcount_irq == cp0_compare_irq)
+ cp0_perfcount_irq = -1;
+ } else {
+Index: linux-2.6.30.5/arch/mips/include/asm/irq.h
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/include/asm/irq.h 2009-09-02 18:24:49.000000000 +0200
++++ linux-2.6.30.5/arch/mips/include/asm/irq.h 2009-09-02 18:26:05.000000000 +0200
+@@ -157,8 +157,10 @@
+ * IE7. Since R2 their number has to be read from the c0_intctl register.
+ */
+ #define CP0_LEGACY_COMPARE_IRQ 7
++#define CP0_LEGACY_PERFCNT_IRQ 7
+
+ extern int cp0_compare_irq;
+ extern int cp0_perfcount_irq;
++extern void __weak arch_fixup_c0_irqs(void);
+
+ #endif /* _ASM_IRQ_H */
--- /dev/null
+Index: linux-2.6.30.5/arch/mips/kernel/cevt-r4k.c
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/kernel/cevt-r4k.c 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/arch/mips/kernel/cevt-r4k.c 2009-09-02 18:26:26.000000000 +0200
+@@ -21,6 +21,22 @@
+
+ #ifndef CONFIG_MIPS_MT_SMTC
+
++/*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register. 4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++ do { \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ } while (0)
++
+ static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+ {
+@@ -30,6 +46,7 @@
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
++ compare_change_hazard();
+ res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ return res;
+ }
--- /dev/null
+Index: linux-2.6.30.5/arch/mips/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/Kconfig 2009-09-02 22:12:48.000000000 +0200
++++ linux-2.6.30.5/arch/mips/Kconfig 2009-09-03 01:18:31.000000000 +0200
+@@ -79,6 +79,24 @@
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
++config IFXMIPS
++ bool "Infineon Twinpass, Danube, Amazon-SE"
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select CEVT_R4K
++ select CSRC_R4K
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_HAS_CPU_MIPS32_R2
++ select HAVE_STD_PC_SERIAL_PORT
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_MULTITHREADING
++ select SYS_HAS_EARLY_PRINTK
++ select HW_HAS_PCI
++ select GENERIC_GPIO
++ select ARCH_WANT_OPTIONAL_GPIOLIB
++ select SWAP_IO_SPACE
++
+ config MACH_DECSTATION
+ bool "DECstations"
+ select BOOT_ELF32
+@@ -643,6 +661,7 @@
+ source "arch/mips/txx9/Kconfig"
+ source "arch/mips/vr41xx/Kconfig"
+ source "arch/mips/cavium-octeon/Kconfig"
++source "arch/mips/ifxmips/Kconfig"
+
+ endmenu
+
+Index: linux-2.6.30.5/arch/mips/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/Makefile 2009-09-02 22:12:48.000000000 +0200
++++ linux-2.6.30.5/arch/mips/Makefile 2009-09-02 22:12:53.000000000 +0200
+@@ -290,6 +290,13 @@
+ load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
+
+ #
++# Infineon IFXMIPS
++#
++core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/
++cflags-$(CONFIG_IFXMIPS) += -I$(srctree)/arch/mips/include/asm/mach-ifxmips
++load-$(CONFIG_IFXMIPS) += 0xffffffff80002000
++
++#
+ # DECstation family
+ #
+ core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/
+Index: linux-2.6.30.5/arch/mips/pci/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/pci/Makefile 2009-09-02 22:12:48.000000000 +0200
++++ linux-2.6.30.5/arch/mips/pci/Makefile 2009-09-02 22:12:53.000000000 +0200
+@@ -52,3 +52,4 @@
+ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+ obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
++obj-$(CONFIG_IFXMIPS) += pci-ifxmips.o ops-ifxmips.o
+Index: linux-2.6.30.5/arch/mips/include/asm/bootinfo.h
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/include/asm/bootinfo.h 2009-09-02 22:12:48.000000000 +0200
++++ linux-2.6.30.5/arch/mips/include/asm/bootinfo.h 2009-09-02 22:13:05.000000000 +0200
+@@ -57,6 +57,8 @@
+ #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
+ #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
+
++#define MACH_INFINEON_IFXMIPS 0
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ extern char *system_type;
--- /dev/null
+Index: linux-2.6.30.5/drivers/char/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/char/Makefile 2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/char/Makefile 2009-09-02 18:29:51.000000000 +0200
+@@ -112,6 +112,10 @@
+ obj-$(CONFIG_JS_RTC) += js-rtc.o
+ js-rtc-y = rtc.o
+
++obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o
++obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o
++obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o
++
+ # Files generated that shall be removed upon make clean
+ clean-files := consolemap_deftbl.c defkeymap.c
+
+Index: linux-2.6.30.5/drivers/mtd/maps/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/mtd/maps/Makefile 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/mtd/maps/Makefile 2009-09-02 18:30:09.000000000 +0200
+@@ -62,3 +62,4 @@
+ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
+ obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
+ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
++obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o
+Index: linux-2.6.30.5/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/net/Kconfig 2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/net/Kconfig 2009-09-02 18:29:51.000000000 +0200
+@@ -353,6 +353,12 @@
+
+ source "drivers/net/arm/Kconfig"
+
++config IFXMIPS_MII0
++ tristate "Infineon IFXMips eth0 driver"
++ depends on IFXMIPS
++ help
++ Support for the MII0 inside the IFXMips SOC
++
+ config AX88796
+ tristate "ASIX AX88796 NE2000 clone support"
+ depends on ARM || MIPS || SUPERH
+Index: linux-2.6.30.5/drivers/serial/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/serial/Kconfig 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/serial/Kconfig 2009-09-02 18:29:51.000000000 +0200
+@@ -1365,6 +1365,14 @@
+ help
+ Support for Console on the NWP serial ports.
+
++config SERIAL_IFXMIPS
++ bool "IFXMips serial driver"
++ depends on IFXMIPS
++ select SERIAL_CORE
++ select SERIAL_CORE_CONSOLE
++ help
++ Driver for the ifxmipss built in ASC hardware
++
+ config SERIAL_QE
+ tristate "Freescale QUICC Engine serial port support"
+ depends on QUICC_ENGINE
+Index: linux-2.6.30.5/drivers/serial/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/serial/Makefile 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/serial/Makefile 2009-09-02 18:29:51.000000000 +0200
+@@ -77,3 +77,4 @@
+ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
+ obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
++obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
+Index: linux-2.6.30.5/drivers/watchdog/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/watchdog/Makefile 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/watchdog/Makefile 2009-09-02 18:29:51.000000000 +0200
+@@ -105,6 +105,7 @@
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
+
+ # PARISC Architecture
+
+Index: linux-2.6.30.5/drivers/net/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/net/Makefile 2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/net/Makefile 2009-09-02 18:30:37.000000000 +0200
+@@ -234,6 +234,7 @@
+ obj-$(CONFIG_MLX4_CORE) += mlx4/
+ obj-$(CONFIG_ENC28J60) += enc28j60.o
+ obj-$(CONFIG_ETHOC) += ethoc.o
++obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
+
+ obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
+
+Index: linux-2.6.30.5/drivers/crypto/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/crypto/Kconfig 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/crypto/Kconfig 2009-09-02 18:29:51.000000000 +0200
+@@ -9,6 +9,9 @@
+ If you say N, all options in this submenu will be skipped and disabled.
+
+ if CRYPTO_HW
++config CRYPTO_DEV_IFXMIPS
++ tristate "Support for IFXMIPS Data Encryption Unit"
++ depends on IFXMIPS
+
+ config CRYPTO_DEV_PADLOCK
+ tristate "Support for VIA PadLock ACE"
+Index: linux-2.6.30.5/drivers/crypto/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/crypto/Makefile 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/crypto/Makefile 2009-09-02 18:30:55.000000000 +0200
+@@ -5,3 +5,4 @@
+ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
+ obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
+ obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/
++obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
+Index: linux-2.6.30.5/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/leds/Kconfig 2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/leds/Kconfig 2009-09-02 18:29:51.000000000 +0200
+@@ -227,6 +227,12 @@
+ This option enables support for BD2802GU RGB LED driver chips
+ accessed via the I2C bus.
+
++config LEDS_IFXMIPS
++ tristate "LED Support for IFXMIPS LEDs"
++ depends on LEDS_CLASS && IFXMIPS
++ help
++ This option enables support for the CM-X270 LEDs.
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGERS
+Index: linux-2.6.30.5/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/leds/Makefile 2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/leds/Makefile 2009-09-02 18:31:23.000000000 +0200
+@@ -27,6 +27,7 @@
+ obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
+ obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
++obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o
+
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
+Index: linux-2.6.30.5/drivers/watchdog/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/watchdog/Kconfig 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/watchdog/Kconfig 2009-09-02 18:29:51.000000000 +0200
+@@ -764,6 +764,12 @@
+ help
+ Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
++config IFXMIPS_WDT
++ bool "IFXMips watchdog"
++ depends on IFXMIPS
++ help
++ Hardware driver for the IFXMIPS Watchdog Timer.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
--- /dev/null
+Index: linux-2.6.30.5/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.30.5.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/mtd/chips/cfi_cmdset_0002.c 2009-09-02 18:31:31.000000000 +0200
+@@ -1090,7 +1090,9 @@
+ int retry_cnt = 0;
+
+ adr += chip->start;
+-
++#ifdef CONFIG_IFXMIPS
++ adr ^= 2;
++#endif
+ spin_lock(chip->mutex);
+ ret = get_chip(map, chip, adr, FL_WRITING);
+ if (ret) {
--- /dev/null
+Index: linux-2.6.30.5/arch/mips/mm/cache.c
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/mm/cache.c 2009-09-02 18:31:37.000000000 +0200
++++ linux-2.6.30.5/arch/mips/mm/cache.c 2009-09-02 18:31:42.000000000 +0200
+@@ -52,6 +52,8 @@
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_wback);
++EXPORT_SYMBOL(_dma_cache_inv);
+
+ #endif /* CONFIG_DMA_NONCOHERENT */
+
--- /dev/null
+Index: linux-2.6.30.5/kernel/irq/chip.c
+===================================================================
+--- linux-2.6.30.5.orig/kernel/irq/chip.c 2009-09-02 20:09:15.000000000 +0200
++++ linux-2.6.30.5/kernel/irq/chip.c 2009-09-02 20:09:25.000000000 +0200
+@@ -537,6 +537,9 @@
+
+ kstat_incr_irqs_this_cpu(irq, desc);
+
++ if (unlikely(!desc->action || (desc->status & IRQ_DISABLED)))
++ return;
++
+ if (desc->chip->ack)
+ desc->chip->ack(irq);
+
--- /dev/null
+Index: linux-2.6.28.10/include/linux/atm.h
+===================================================================
+--- linux-2.6.28.10.orig/include/linux/atm.h 2009-05-02 20:54:43.000000000 +0200
++++ linux-2.6.28.10/include/linux/atm.h 2009-09-02 15:00:30.000000000 +0200
+@@ -139,6 +139,9 @@
+ int min_pcr; /* minimum PCR in cells per second */
+ int max_cdv; /* maximum CDV in microseconds */
+ int max_sdu; /* maximum SDU in bytes */
++ int scr; /* sustained rate in cells per second */
++ int mbs; /* maximum burst size (MBS) in cells */
++ int cdv; /* Cell delay varition */
+ /* extra params for ABR */
+ unsigned int icr; /* Initial Cell Rate (24-bit) */
+ unsigned int tbe; /* Transient Buffer Exposure (24-bit) */
+Index: linux-2.6.28.10/kernel/time/timekeeping.c
+===================================================================
+--- linux-2.6.28.10.orig/kernel/time/timekeeping.c 2009-09-02 15:41:06.000000000 +0200
++++ linux-2.6.28.10/kernel/time/timekeeping.c 2009-09-02 15:41:23.000000000 +0200
+@@ -43,6 +43,7 @@
+ * used instead.
+ */
+ struct timespec xtime __attribute__ ((aligned (16)));
++EXPORT_SYMBOL(xtime);
+ struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
+ static unsigned long total_sleep_time; /* seconds */
+
+++ /dev/null
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1464,7 +1464,16 @@ void __cpuinit per_cpu_trap_init(void)
- */
- if (cpu_has_mips_r2) {
- cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+ if (!cp0_compare_irq)
-+ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
- cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-+ if (!cp0_perfcount_irq)
-+ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+ if (arch_fixup_c0_irqs)
-+ arch_fixup_c0_irqs();
-+
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
- } else {
---- a/include/asm-mips/irq.h
-+++ b/include/asm-mips/irq.h
-@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq)
- * IE7. Since R2 their number has to be read from the c0_intctl register.
- */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
-
- extern int cp0_compare_irq;
- extern int cp0_perfcount_irq;
-
-+extern void __weak arch_fixup_c0_irqs(void);
-+
-+
- #endif /* _ASM_IRQ_H */
+++ /dev/null
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -13,6 +13,22 @@
- #include <asm/smtc_ipi.h>
- #include <asm/time.h>
-
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register. 4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+ do { \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ } while (0)
-+
- static int mips_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
-@@ -28,6 +44,7 @@ static int mips_next_event(unsigned long
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
-+ compare_change_hazard();
- res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
- #ifdef CONFIG_MIPS_MT_SMTC
- evpe(vpflags);
-@@ -187,7 +204,7 @@ static int c0_compare_int_usable(void)
- */
- if (c0_compare_int_pending()) {
- write_c0_compare(read_c0_count());
-- irq_disable_hazard();
-+ compare_change_hazard();
- if (c0_compare_int_pending())
- return 0;
- }
-@@ -196,7 +213,7 @@ static int c0_compare_int_usable(void)
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
-- irq_disable_hazard();
-+ compare_change_hazard();
- if ((int)(read_c0_count() - cnt) < 0)
- break;
- /* increase delta if the timer was already expired */
-@@ -205,11 +222,12 @@ static int c0_compare_int_usable(void)
- while ((int)(read_c0_count() - cnt) <= 0)
- ; /* Wait for expiry */
-
-+ compare_change_hazard();
- if (!c0_compare_int_pending())
- return 0;
-
- write_c0_compare(read_c0_count());
-- irq_disable_hazard();
-+ compare_change_hazard();
- if (c0_compare_int_pending())
- return 0;
-
+++ /dev/null
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -78,6 +78,23 @@ config MIPS_COBALT
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
-
-+config IFXMIPS
-+ bool "Infineon Twinpass, Danube, Amazon-SE"
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_MULTITHREADING
-+ select SYS_HAS_EARLY_PRINTK
-+ select HW_HAS_PCI
-+ select GENERIC_GPIO
-+ select SWAP_IO_SPACE
-+
- config MACH_DECSTATION
- bool "DECstations"
- select BOOT_ELF32
-@@ -697,6 +714,7 @@ source "arch/mips/sibyte/Kconfig"
- source "arch/mips/tx4927/Kconfig"
- source "arch/mips/tx4938/Kconfig"
- source "arch/mips/vr41xx/Kconfig"
-+source "arch/mips/ifxmips/Kconfig"
-
- endmenu
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -283,6 +283,13 @@ cflags-$(CONFIG_MIPS_COBALT) += -Iinclud
- load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
-
- #
-+# Infineon IFXMIPS
-+#
-+core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/
-+cflags-$(CONFIG_IFXMIPS) += -Iinclude/asm-mips/mach-ifxmips
-+load-$(CONFIG_IFXMIPS) += 0xffffffff80002000
-+
-+#
- # DECstation family
- #
- core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -94,6 +94,12 @@
- #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
- #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
-
-+/*
-+ * Valid machtype for group IFXMIPS
-+ */
-+#define MACH_GROUP_IFXMIPS 29
-+#define MACH_INFINEON_IFXMIPS 0
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- extern char *system_type;
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
- obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
-+obj-$(CONFIG_IFXMIPS) += pci-ifxmips.o ops-ifxmips.o
+++ /dev/null
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -114,6 +114,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
- obj-$(CONFIG_JS_RTC) += js-rtc.o
- js-rtc-y = rtc.o
-
-+obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o
-+obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o
-+obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o
-+
- # Files generated that shall be removed upon make clean
- clean-files := consolemap_deftbl.c defkeymap.c
-
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
- obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
- obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
- obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
-+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -351,6 +351,12 @@ config MACB
-
- source "drivers/net/arm/Kconfig"
-
-+config IFXMIPS_MII0
-+ tristate "Infineon IFXMips eth0 driver"
-+ depends on IFXMIPS
-+ help
-+ Support for the MII0 inside the IFXMips SOC
-+
- config AX88796
- tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS || SUPERH
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1334,6 +1334,14 @@ config SERIAL_OF_PLATFORM
- Currently, only 8250 compatible ports are supported, but
- others can easily be added.
-
-+config SERIAL_IFXMIPS
-+ bool "IFXMips serial driver"
-+ depends on IFXMIPS
-+ select SERIAL_CORE
-+ select SERIAL_CORE_CONSOLE
-+ help
-+ Driver for the ifxmipss built in ASC hardware
-+
- config SERIAL_QE
- tristate "Freescale QUICC Engine serial port support"
- depends on QUICC_ENGINE
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -68,3 +68,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
-
- # PARISC Architecture
-
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
- obj-$(CONFIG_NIU) += niu.o
- obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
--
-+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
- If you say N, all options in this submenu will be skipped and disabled.
-
- if CRYPTO_HW
-+config CRYPTO_DEV_IFXMIPS
-+ tristate "Support for IFXMIPS Data Encryption Unit"
-+ depends on IFXMIPS
-
- config CRYPTO_DEV_PADLOCK
- tristate "Support for VIA PadLock ACE"
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
- obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
- obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
-+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597
- help
- This driver enables support for the on-chip R8A66597 in the
- SH7366 and SH7723 processors.
-+
-+config USB_DWC_HCD
-+ tristate "IFXMIPS USB Host Controller Driver"
-+ depends on USB && IFXMIPS
-+ default y
-+ help
-+ Danube USB Host Controller
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -153,6 +153,12 @@ config LEDS_CLEVO_MAIL
- To compile this driver as a module, choose M here: the
- module will be called leds-clevo-mail.
-
-+config LEDS_IFXMIPS
-+ tristate "LED Support for IFXMIPS LEDs"
-+ depends on LEDS_CLASS && IFXMIPS
-+ help
-+ This option enables support for the CM-X270 LEDs.
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_CM_X270)
- obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
- obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
- obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
-+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -683,6 +683,12 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config IFXMIPS_WDT
-+ bool "IFXMips watchdog"
-+ depends on IFXMIPS
-+ help
-+ Hardware driver for the IFXMIPS Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1041,7 +1041,9 @@ static int __xipram do_write_oneword(str
- int retry_cnt = 0;
-
- adr += chip->start;
--
-+#ifdef CONFIG_IFXMIPS
-+ adr ^= 2;
-+#endif
- spin_lock(chip->mutex);
- ret = get_chip(map, chip, adr, FL_WRITING);
- if (ret) {
+++ /dev/null
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -50,6 +50,8 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT */
-
projects / openwrt / staging / ansuel.git / commitdiff