--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ruckus,gd11", "qca,ar7161";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ dir-green {
+ label = "green:dir";
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ opt-green {
+ label = "green:opt";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power_green: power-green {
+ label = "green:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_power_red: power-red {
+ label = "red:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ wlan2g-green {
+ label = "green:wlan2g";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0assoc";
+ };
+
+ wlan2g-yellow {
+ label = "yellow:wlan2g";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g-green {
+ label = "green:wlan5g";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1assoc";
+ };
+
+ wlan5g-yellow {
+ label = "yellow:wlan5g";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ruckus-himem@3ff0000 {
+ /* Ruckus Himem area used to control
+ * redundant boot image selection
+ */
+ compatible = "nvmem-rmem";
+ reg = <0x3ff0000 0x10000>;
+ no-map;
+ };
+ };
+
+ beamforming-2g-spi {
+ compatible = "spi-gpio";
+ mosi-gpios = <&ath9k0 5 GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&ath9k0 6 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ beamforming_2g_gpio: beamforming-2g-gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ registers-number = <1>;
+ spi-max-frequency = <24000000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ beamforming-5g-spi {
+ compatible = "spi-gpio";
+ mosi-gpios = <&ath9k1 5 GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&ath9k1 6 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ beamforming_5g_gpio: beamforming-5g-gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ registers-number = <1>;
+ spi-max-frequency = <24000000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 { /* 2.4 GHz */
+ compatible = "pci168c,0029";
+ reg = <0x8800 0 0 0 0>;
+ nvmem-cells = <&macaddr_bdata_60>;
+ nvmem-cell-names = "mac-address";
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ ath9k1: wifi@0,12 { /* 5 GHz */
+ compatible = "pci168c,0029";
+ reg = <0x9000 0 0 0 0>;
+ nvmem-cells = <&macaddr_bdata_76>;
+ nvmem-cell-names = "mac-address";
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ nvmem-cells = <&macaddr_bdata_66>;
+ nvmem-cell-names = "mac-address";
+
+ pll-data = <0x00110000 0x00001099 0x00991099>;
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x40000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ /* On stock FW this encompasses rcks_wlan.main,
+ * rcks_wlan.bkup and datafs partitions
+ */
+ partition@40000 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ reg = <0x40000 0xf40000>;
+ label = "firmware";
+ };
+
+ partition@f80000 {
+ compatible = "u-boot,env";
+ reg = <0xf80000 0x40000>;
+ label = "u-boot-env";
+ };
+
+ board_data: partition@fc0000 {
+ reg = <0xfc0000 0x40000>;
+ label = "board-data";
+ read-only;
+ };
+ };
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&board_data {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_bdata_60: macaddr@60 {
+ reg = <0x60 0x6>;
+ };
+
+ macaddr_bdata_66: macaddr@66 {
+ reg = <0x66 0x6>;
+ };
+
+ macaddr_bdata_76: macaddr@76 {
+ reg = <0x76 0x6>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7161_ruckus_gd11.dtsi"
+
+/ {
+ model = "Ruckus ZoneFlex 7351[-U]";
+ compatible = "ruckus,zf7351", "qca,ar7161";
+
+};
+
+&beamforming_2g_gpio {
+ /* Default beamforming switches configuration from stock firmware,
+ * the AP is started and for broadcast frames - all outputs high */
+ lb0 {
+ line-name = "beamforming:2g:lb0";
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ lb1 {
+ line-name = "beamforming:2g:lb1";
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ lb2 {
+ line-name = "beamforming:2g:lb2";
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ lb3 {
+ line-name = "beamforming:2g:lb3";
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ lb4 {
+ line-name = "beamforming:2g:lb4";
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ lb5 {
+ line-name = "beamforming:2g:lb5";
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+};
+
+&beamforming_5g_gpio {
+ /* Default beamforming switches configuration from stock firmware,
+ * the AP is started and for broadcast frames - all outputs high */
+ hb0 {
+ line-name = "beamforming:5g:hb0";
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ hb1 {
+ line-name = "beamforming:5g:hb1";
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ hb2 {
+ line-name = "beamforming:5g:hb2";
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ hb3 {
+ line-name = "beamforming:5g:hb3";
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ hb4 {
+ line-name = "beamforming:5g:hb4";
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ hb5 {
+ line-name = "beamforming:5g:hb5";
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ hb6 {
+ line-name = "beamforming:5g:hb6";
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+
+ hb7 {
+ line-name = "beamforming:5g:hb7";
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ gpio-hog;
+ };
+};
projects / openwrt / openwrt.git / commitdiff