babeld: Comment options in config file

Signed-off-by: Gabriel Kerneis <kerneis@pps.jussieu.fr>
SVN-Revision: 20164

diff --git a/net/babel/files/babeld.config b/net/babel/files/babeld.config
index ac0cb76b445815080433bf8b94a8b05a5f8d85a3..f3eea2c4bd23c70a2ea0f0c86d482b755401fcea 100644 (file)
--- a/net/babel/files/babeld.config
+++ b/net/babel/files/babeld.config
@@ -1,23 +1,23 @@
 package babeld
 
 config general
-       option 'multicast_address' 'ff02::cca6:c0f9:e182:5373'
-       option 'port' '8475'
-       option 'state_file' '/var/lib/babel-state'
-       option 'hello_interval' '4'
-       option 'wired_hello_interval' '20'
+       # option 'multicast_address' 'ff02::cca6:c0f9:e182:5373'
+       # option 'port' '8475'
+       # option 'state_file' '/var/lib/babel-state'
+       # option 'hello_interval' '4'
+       # option 'wired_hello_interval' '20'
        # Enable  detection of idle networks.  This functonality is
        # experimental, don't use it unless you know what you are doing.
        ## option 'idle_hello_interval' '0'
-       option 'kernel_priority' '0'
+       # option 'kernel_priority' '0'
        # Do not use this option unless you know what you are doing, as it can
        # cause persistent route flapping.
        ## option 'duplication_priority' '0'
-       option 'carrier_sense' 'false'
-       option 'assume_wireless' 'false'
-       option 'no_split_horizon' 'false'
-       option 'parasitic' 'false'
-       option 'debug' '0'
+       # option 'carrier_sense' 'false'
+       # option 'assume_wireless' 'false'
+       # option 'no_split_horizon' 'false'
+       # option 'parasitic' 'false'
+       # option 'debug' '0'
        # Listen for connections from a front-end, e.g. on port 33123.
        ## option 'local_server' '33123'
        # Use the given kernel routing table for routes inserted by babeld.
@@ -26,19 +26,19 @@ config general
        ## option 'import_table' '0'
        # The configuration file is not necessary since you can do everything
        # from this file.
-       option 'conf_file' '/etc/babeld.conf'
-       option 'log_file' '/var/log/babeld.log'
+       # option 'conf_file' '/etc/babeld.conf'
+       # option 'log_file' '/var/log/babeld.log'
 
 # You can use aliases (like lan, wlan) or real names (like eth0.0).
 # If you use an alias, it must be already defined when babeld starts.
 # Otherwise, the name is taken literally and the interface can be
 # brought up later (useful for tunnels for instance).
 config interface wlan
-       # Change this line to enable babeld on this interface
+       # Remove this line to enable babeld on this interface
        option 'ignore' 'true'
-       option 'wired' 'auto'
-       option 'link_quality' 'auto'
-       option 'split_horizon' 'auto'
+       # option 'wired' 'auto'
+       # option 'link_quality' 'auto'
+       # option 'split_horizon' 'auto'
        # The default is 96 for wired interfaces, and 256 for wireless ones
        ## option 'rxcost' '256'
        # The  default  is  specified with the -h and -H command-line flags.