The boardname is gl-x750 and is already used for the led names.
Signed-off-by: Mathias Kresin <dev@kresin.me>
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
;;
-glinet,x750)
- ucidef_set_led_netdev "wan" "WAN" "gl-x750:green:wan" "eth0"
+glinet,gl-x750)
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
;;
netgear,wnr612-v2|\
on,n150r)
;;
glinet,ar150|\
glinet,ar300m|\
- glinet,x750)
+ glinet,gl-x750)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
iodata,etg3-r|\
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
- glinet,x750)
+ glinet,gl-x750)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9533_glinet_x750.dtsi"
+
+&spi {
+ status = "okay";
+ num-cs = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x060000 0xfa0000>;
+ };
+
+ };
+ };
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9533_glinet_x750.dtsi"
-
-&spi {
- status = "okay";
- num-cs = <0>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- art: partition@50000 {
- label = "art";
- reg = <0x050000 0x010000>;
- };
-
- partition@60000 {
- label = "firmware";
- reg = <0x060000 0xfa0000>;
- };
-
- };
- };
-};
#include "qca9533.dtsi"
/ {
- compatible = "glinet,x750", "qca,qca9533";
+ compatible = "glinet,gl-x750", "qca,qca9533";
model = "GL.iNet GL-X750";
keys {
endef
TARGET_DEVICES += glinet_ar300m_nor
-define Device/glinet_x750
+define Device/glinet_gl-x750
ATH_SOC := qca9533
- DEVICE_TITLE := GL.iNet GL-ARX750
+ DEVICE_TITLE := GL.iNet GL-X750
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9887
IMAGE_SIZE := 16000k
endef
-TARGET_DEVICES += glinet_x750
+TARGET_DEVICES += glinet_gl-x750
define Device/iodata_etg3-r
ATH_SOC := ar9342