brcm47xx: register ADM6996L switch

This patch makes it possible to use adm6996.c on first generation
BCM47XX devices with ADM switches.

This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for
the device.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38699

diff --git a/target/linux/brcm47xx/config-3.10 b/target/linux/brcm47xx/config-3.10
index bc139ad73811b194c7e4eb0be47a3ef8130886a8..78b69edb08bdf6e5d91bdab2f48b50ee3a5af530 100644 (file)
--- a/target/linux/brcm47xx/config-3.10
+++ b/target/linux/brcm47xx/config-3.10
@@ -1,3 +1,4 @@
+CONFIG_ADM6996_PHY=y
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_ARCH_DISCARD_MEMBLOCK=y
 CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y

diff --git a/target/linux/brcm47xx/patches-3.10/209-b44-register-adm-switch.patch b/target/linux/brcm47xx/patches-3.10/209-b44-register-adm-switch.patch
new file mode 100644 (file)
index 0000000..3f01286
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.10/209-b44-register-adm-switch.patch
@@ -0,0 +1,123 @@
+From b52546f8af54b78050f84ab031ad1aaf6507ed95 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 9 Nov 2013 17:03:59 +0100
+Subject: [PATCH 10/10] b44: register adm switch
+
+---
+ drivers/net/ethernet/broadcom/b44.c |   64 ++++++++++++++++++++++++++++++++++-
+ drivers/net/ethernet/broadcom/b44.h |    3 ++
+ 2 files changed, 66 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -31,6 +31,8 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/slab.h>
+ #include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/platform_data/adm6996-gpio.h>
+ 
+ #include <asm/uaccess.h>
+ #include <asm/io.h>
+@@ -2216,6 +2218,58 @@ static void b44_adjust_link(struct net_d
+               phy_print_status(phydev);
+ }
+ 
++#ifdef CONFIG_BCM47XX
++static struct adm6996_gpio_platform_data b44_adm_data = {
++      .eecs   = 2,
++      .eesk   = 3,
++      .eedi   = 4,
++      .eerc   = 5,
++      .model  = ADM6996L,
++};
++
++static struct platform_device b44_adm_dev = {
++      .name           = "adm6996_gpio",
++      .id             = -1,
++      .dev            = {
++              .platform_data = &b44_adm_data,
++      },
++};
++
++static int b44_register_adm_switch(struct b44 *bp)
++{
++      int gpio;
++      int err;
++
++      gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
++      if (gpio >= 0)
++              b44_adm_data.eecs = gpio;
++
++      gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
++      if (gpio >= 0)
++              b44_adm_data.eesk = gpio;
++
++      gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
++      if (gpio >= 0)
++              b44_adm_data.eedi = gpio;
++
++      gpio = bcm47xx_nvram_gpio_pin("adm_rc");
++      if (gpio >= 0)
++              b44_adm_data.eerc = gpio;
++
++      if (!bp->adm_switch) {
++              err = platform_device_register(&b44_adm_dev);
++              if (!err)
++                      bp->adm_switch = &b44_adm_dev;
++      }
++      return err;
++}
++#else
++static int b44_register_adm_switch(struct b44 *bp)
++{
++      return 0;
++}
++#endif /* CONFIG_BCM47XX */
++
+ static int b44_register_phy_one(struct b44 *bp)
+ {
+       struct mii_bus *mii_bus;
+@@ -2223,6 +2277,7 @@ static int b44_register_phy_one(struct b
+       struct phy_device *phydev;
+       int err;
+       struct phy_c45_device_ids c45_ids = {0};
++      struct ssb_sprom *sprom = &sdev->bus->sprom;
+ 
+       mii_bus = mdiobus_alloc();
+       if (!mii_bus) {
+@@ -2256,7 +2311,11 @@ static int b44_register_phy_one(struct b
+       }
+ 
+       phydev = bp->mii_bus->phy_map[bp->phy_addr];
+-      if (!phydev) {
++      if (!phydev &&
++          (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
++              if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
++                      b44_register_adm_switch(bp);
++
+               dev_info(sdev->dev, "could not find PHY at %i, create dummy one\n",
+                        bp->phy_addr);
+ 
+--- a/drivers/net/ethernet/broadcom/b44.h
++++ b/drivers/net/ethernet/broadcom/b44.h
+@@ -345,6 +345,9 @@ B44_STAT_REG_DECLARE
+       struct u64_stats_sync   syncp;
+ };
+ 
++#define       B44_BOARDFLAG_ROBO              0x0010  /* Board has robo switch or core */
++#define       B44_BOARDFLAG_ADM               0x0080  /* Board has ADMtek switch */
++
+ struct ssb_device;
+ 
+ struct b44 {
+@@ -402,6 +405,9 @@ struct b44 {
+       int                     old_link;
+       int                     old_duplex;
+       struct mii_if_info      mii_if;
++
++      /* platform device for associated switch */
++      struct platform_device *adm_switch;
+ };
+ 
+ #endif /* _B44_H */

diff --git a/target/linux/brcm47xx/patches-3.10/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.10/210-b44_phy_fix.patch
index 559d5a9781b5fc04508493de9326233636c9c641..53989ef09493868762091dfbdc50bbf7df441152 100644 (file)
--- a/target/linux/brcm47xx/patches-3.10/210-b44_phy_fix.patch
+++ b/target/linux/brcm47xx/patches-3.10/210-b44_phy_fix.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/ethernet/broadcom/b44.c
 +++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -429,10 +429,34 @@ static void b44_wap54g10_workaround(stru
+@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
  error:
        pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
  }
@@ -35,7 +35,7 @@
  #endif
  
  static int b44_setup_phy(struct b44 *bp)
-@@ -441,6 +465,7 @@ static int b44_setup_phy(struct b44 *bp)
+@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
        int err;
  
        b44_wap54g10_workaround(bp);
@@ -43,7 +43,7 @@
  
        if (bp->flags & B44_FLAG_EXTERNAL_PHY)
                return 0;
-@@ -2158,6 +2183,8 @@ static int b44_get_invariants(struct b44
+@@ -2160,6 +2185,8 @@ static int b44_get_invariants(struct b44
         * valid PHY address. */
        bp->phy_addr &= 0x1F;