staging: octeon-usb: cvmx-usb: delete redundant example code

Delete redundant example code found in comments. It's already there in
the driver proper.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/octeon-usb/cvmx-usb.h b/drivers/staging/octeon-usb/cvmx-usb.h
index eed6ba43cf598fe985d25e2ebf6f378ced29b12f..ffabfbe321f571b5a758142acb31771427fa99e9 100644 (file)
--- a/drivers/staging/octeon-usb/cvmx-usb.h
+++ b/drivers/staging/octeon-usb/cvmx-usb.h
@@ -217,214 +217,7 @@
  * messages similar to the usb 2.0 spec for hub control and
  * status. For these systems it may be necessary to write
  * function to decode standard usb control messages into
- * equivalent cvmx-usb API calls. As an example, the following
- * code is used under Linux for some of the basic hub control
- * messages.
- *
- * @code
- * static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
- * {
- *     cvmx_usb_state_t *usb = (cvmx_usb_state_t *)hcd->hcd_priv;
- *     cvmx_usb_port_status_t usb_port_status;
- *     int port_status;
- *     struct usb_hub_descriptor *desc;
- *     unsigned long flags;
- *
- *     switch (typeReq)
- *     {
- *         case ClearHubFeature:
- *             DEBUG_ROOT_HUB("OcteonUSB: ClearHubFeature\n");
- *             switch (wValue)
- *             {
- *                 case C_HUB_LOCAL_POWER:
- *                 case C_HUB_OVER_CURRENT:
- *                     // Nothing required here
- *                     break;
- *                 default:
- *                     return -EINVAL;
- *             }
- *             break;
- *         case ClearPortFeature:
- *             DEBUG_ROOT_HUB("OcteonUSB: ClearPortFeature");
- *             if (wIndex != 1)
- *             {
- *                 DEBUG_ROOT_HUB(" INVALID\n");
- *                 return -EINVAL;
- *             }
- *
- *             switch (wValue)
- *             {
- *                 case USB_PORT_FEAT_ENABLE:
- *                     DEBUG_ROOT_HUB(" ENABLE");
- *                     local_irq_save(flags);
- *                     cvmx_usb_disable(usb);
- *                     local_irq_restore(flags);
- *                     break;
- *                 case USB_PORT_FEAT_SUSPEND:
- *                     DEBUG_ROOT_HUB(" SUSPEND");
- *                     // Not supported on Octeon
- *                     break;
- *                 case USB_PORT_FEAT_POWER:
- *                     DEBUG_ROOT_HUB(" POWER");
- *                     // Not supported on Octeon
- *                     break;
- *                 case USB_PORT_FEAT_INDICATOR:
- *                     DEBUG_ROOT_HUB(" INDICATOR");
- *                     // Port inidicator not supported
- *                     break;
- *                 case USB_PORT_FEAT_C_CONNECTION:
- *                     DEBUG_ROOT_HUB(" C_CONNECTION");
- *                     // Clears drivers internal connect status change flag
- *                     cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
- *                     break;
- *                 case USB_PORT_FEAT_C_RESET:
- *                     DEBUG_ROOT_HUB(" C_RESET");
- *                     // Clears the driver's internal Port Reset Change flag
- *                     cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
- *                     break;
- *                 case USB_PORT_FEAT_C_ENABLE:
- *                     DEBUG_ROOT_HUB(" C_ENABLE");
- *                     // Clears the driver's internal Port Enable/Disable Change flag
- *                     cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
- *                     break;
- *                 case USB_PORT_FEAT_C_SUSPEND:
- *                     DEBUG_ROOT_HUB(" C_SUSPEND");
- *                     // Clears the driver's internal Port Suspend Change flag,
- *                         which is set when resume signaling on the host port is
- *                         complete
- *                     break;
- *                 case USB_PORT_FEAT_C_OVER_CURRENT:
- *                     DEBUG_ROOT_HUB(" C_OVER_CURRENT");
- *                     // Clears the driver's overcurrent Change flag
- *                     cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
- *                     break;
- *                 default:
- *                     DEBUG_ROOT_HUB(" UNKNOWN\n");
- *                     return -EINVAL;
- *             }
- *             DEBUG_ROOT_HUB("\n");
- *             break;
- *         case GetHubDescriptor:
- *             DEBUG_ROOT_HUB("OcteonUSB: GetHubDescriptor\n");
- *             desc = (struct usb_hub_descriptor *)buf;
- *             desc->bDescLength = 9;
- *             desc->bDescriptorType = 0x29;
- *             desc->bNbrPorts = 1;
- *             desc->wHubCharacteristics = 0x08;
- *             desc->bPwrOn2PwrGood = 1;
- *             desc->bHubContrCurrent = 0;
- *             desc->bitmap[0] = 0;
- *             desc->bitmap[1] = 0xff;
- *             break;
- *         case GetHubStatus:
- *             DEBUG_ROOT_HUB("OcteonUSB: GetHubStatus\n");
- *             *(__le32 *)buf = 0;
- *             break;
- *         case GetPortStatus:
- *             DEBUG_ROOT_HUB("OcteonUSB: GetPortStatus");
- *             if (wIndex != 1)
- *             {
- *                 DEBUG_ROOT_HUB(" INVALID\n");
- *                 return -EINVAL;
- *             }
- *
- *             usb_port_status = cvmx_usb_get_status(usb);
- *             port_status = 0;
- *
- *             if (usb_port_status.connect_change)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
- *                 DEBUG_ROOT_HUB(" C_CONNECTION");
- *             }
- *
- *             if (usb_port_status.port_enabled)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
- *                 DEBUG_ROOT_HUB(" C_ENABLE");
- *             }
- *
- *             if (usb_port_status.connected)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_CONNECTION);
- *                 DEBUG_ROOT_HUB(" CONNECTION");
- *             }
- *
- *             if (usb_port_status.port_enabled)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_ENABLE);
- *                 DEBUG_ROOT_HUB(" ENABLE");
- *             }
- *
- *             if (usb_port_status.port_over_current)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
- *                 DEBUG_ROOT_HUB(" OVER_CURRENT");
- *             }
- *
- *             if (usb_port_status.port_powered)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_POWER);
- *                 DEBUG_ROOT_HUB(" POWER");
- *             }
- *
- *             if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
- *                 DEBUG_ROOT_HUB(" HIGHSPEED");
- *             }
- *             else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
- *                 DEBUG_ROOT_HUB(" LOWSPEED");
- *             }
- *
- *             *((__le32 *)buf) = cpu_to_le32(port_status);
- *             DEBUG_ROOT_HUB("\n");
- *             break;
- *         case SetHubFeature:
- *             DEBUG_ROOT_HUB("OcteonUSB: SetHubFeature\n");
- *             // No HUB features supported
- *             break;
- *         case SetPortFeature:
- *             DEBUG_ROOT_HUB("OcteonUSB: SetPortFeature");
- *             if (wIndex != 1)
- *             {
- *                 DEBUG_ROOT_HUB(" INVALID\n");
- *                 return -EINVAL;
- *             }
- *
- *             switch (wValue)
- *             {
- *                 case USB_PORT_FEAT_SUSPEND:
- *                     DEBUG_ROOT_HUB(" SUSPEND\n");
- *                     return -EINVAL;
- *                 case USB_PORT_FEAT_POWER:
- *                     DEBUG_ROOT_HUB(" POWER\n");
- *                     return -EINVAL;
- *                 case USB_PORT_FEAT_RESET:
- *                     DEBUG_ROOT_HUB(" RESET\n");
- *                     local_irq_save(flags);
- *                     cvmx_usb_disable(usb);
- *                     if (cvmx_usb_enable(usb))
- *                         DEBUG_ERROR("Failed to enable the port\n");
- *                     local_irq_restore(flags);
- *                     return 0;
- *                 case USB_PORT_FEAT_INDICATOR:
- *                     DEBUG_ROOT_HUB(" INDICATOR\n");
- *                     // Not supported
- *                     break;
- *                 default:
- *                     DEBUG_ROOT_HUB(" UNKNOWN\n");
- *                     return -EINVAL;
- *             }
- *             break;
- *         default:
- *             DEBUG_ROOT_HUB("OcteonUSB: Unknown root hub request\n");
- *             return -EINVAL;
- *     }
- *     return 0;
- * }
- * @endcode
+ * equivalent cvmx-usb API calls.
  *
  * <h2>Interrupts</h2>
  *