+++ /dev/null
-CONFIG_ADM6996_PHY=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_BCM47XX=y
-CONFIG_BCM47XX_BCMA=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SSB=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_MIPS=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_NFLASH=y
-CONFIG_BCMA_PFLASH=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BGMAC_BCMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BMIPS is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_WDT=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO_REGISTER=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCM47XXNFLASH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-# CONFIG_OF is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_RCU_STALL_COMMON is not set
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_EXTIF=y
-CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_SSB_DRIVER_GPIO=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_HOST_SOC=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_SFLASH=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-From 36b3b702c20e67b18070159dfba80d2084836928 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 23 Jan 2017 12:50:38 -0700
-Subject: [PATCH] MIPS: BCM47XX: Add Luxul devices to the database
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far only Luxul XWR-1750 router was supported. This adds a set of
-other Luxul devices based on BCM47XX. It's a standard support for LEDs
-and buttons.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: Rafał Miłecki <zajec5@gmail.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/15106/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm47xx/board.c | 9 +++
- arch/mips/bcm47xx/buttons.c | 72 +++++++++++++++++++
- arch/mips/bcm47xx/leds.c | 81 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 9 +++
- 4 files changed, 171 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -149,6 +149,15 @@ struct bcm47xx_board_type_list2 bcm47xx_
- /* board_id */
- static const
- struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
-+ {{BCM47XX_BOARD_LUXUL_ABR_4400_V1, "Luxul ABR-4400 V1"}, "luxul_abr4400_v1"},
-+ {{BCM47XX_BOARD_LUXUL_XAP_310_V1, "Luxul XAP-310 V1"}, "luxul_xap310_v1"},
-+ {{BCM47XX_BOARD_LUXUL_XAP_1210_V1, "Luxul XAP-1210 V1"}, "luxul_xap1210_v1"},
-+ {{BCM47XX_BOARD_LUXUL_XAP_1230_V1, "Luxul XAP-1230 V1"}, "luxul_xap1230_v1"},
-+ {{BCM47XX_BOARD_LUXUL_XAP_1240_V1, "Luxul XAP-1240 V1"}, "luxul_xap1240_v1"},
-+ {{BCM47XX_BOARD_LUXUL_XAP_1500_V1, "Luxul XAP-1500 V1"}, "luxul_xap1500_v1"},
-+ {{BCM47XX_BOARD_LUXUL_XBR_4400_V1, "Luxul XBR-4400 V1"}, "luxul_xbr4400_v1"},
-+ {{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"},
-+ {{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
- {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
- {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -308,6 +308,51 @@ bcm47xx_buttons_linksys_wrtsl54gs[] __in
- /* Luxul */
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_luxul_abr_4400_v1[] = {
-+ BCM47XX_GPIO_KEY(14, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_luxul_xap_310_v1[] = {
-+ BCM47XX_GPIO_KEY(20, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_luxul_xap_1210_v1[] = {
-+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_luxul_xap_1230_v1[] = {
-+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_luxul_xap_1240_v1[] = {
-+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_luxul_xap_1500_v1[] = {
-+ BCM47XX_GPIO_KEY(14, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_luxul_xbr_4400_v1[] = {
-+ BCM47XX_GPIO_KEY(14, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_luxul_xvw_p30_v1[] = {
-+ BCM47XX_GPIO_KEY(20, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_luxul_xwr_600_v1[] = {
-+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_luxul_xwr_1750_v1[] = {
- BCM47XX_GPIO_KEY(14, BTN_TASK),
- };
-@@ -567,6 +612,33 @@ int __init bcm47xx_buttons_register(void
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
- break;
-
-+ case BCM47XX_BOARD_LUXUL_ABR_4400_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_abr_4400_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_310_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_310_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_1210_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1210_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_1230_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1230_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_1240_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1240_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1500_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xbr_4400_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XVW_P30_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xvw_p30_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XWR_600_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xwr_600_v1);
-+ break;
- case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xwr_1750_v1);
- break;
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -373,6 +373,60 @@ bcm47xx_leds_linksys_wrtsl54gs[] __initc
- /* Luxul */
-
- static const struct gpio_led
-+bcm47xx_leds_luxul_abr_4400_v1[] __initconst = {
-+ BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xap_310_v1[] __initconst = {
-+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xap_1210_v1[] __initconst = {
-+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xap_1230_v1[] __initconst = {
-+ BCM47XX_GPIO_LED(3, "blue", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(4, "green", "bridge", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xap_1240_v1[] __initconst = {
-+ BCM47XX_GPIO_LED(3, "blue", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(4, "green", "bridge", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xap_1500_v1[] __initconst = {
-+ BCM47XX_GPIO_LED_TRIGGER(13, "green", "status", 1, "timer"),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
-+ BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xvw_p30_v1[] __initconst = {
-+ BCM47XX_GPIO_LED_TRIGGER(0, "blue", "status", 1, "timer"),
-+ BCM47XX_GPIO_LED(1, "green", "link", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xwr_600_v1[] __initconst = {
-+ BCM47XX_GPIO_LED(3, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
-+ BCM47XX_GPIO_LED(9, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_luxul_xwr_1750_v1[] __initconst = {
- BCM47XX_GPIO_LED(5, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -633,6 +687,33 @@ void __init bcm47xx_leds_register(void)
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
- break;
-
-+ case BCM47XX_BOARD_LUXUL_ABR_4400_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_luxul_abr_4400_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_310_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_310_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_1210_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1210_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_1230_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1230_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_1240_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1240_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XVW_P30_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xvw_p30_v1);
-+ break;
-+ case BCM47XX_BOARD_LUXUL_XWR_600_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_600_v1);
-+ break;
- case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
- bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
- break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -80,6 +80,15 @@ enum bcm47xx_board {
- BCM47XX_BOARD_LINKSYS_WRT610NV2,
- BCM47XX_BOARD_LINKSYS_WRTSL54GS,
-
-+ BCM47XX_BOARD_LUXUL_ABR_4400_V1,
-+ BCM47XX_BOARD_LUXUL_XAP_310_V1,
-+ BCM47XX_BOARD_LUXUL_XAP_1210_V1,
-+ BCM47XX_BOARD_LUXUL_XAP_1230_V1,
-+ BCM47XX_BOARD_LUXUL_XAP_1240_V1,
-+ BCM47XX_BOARD_LUXUL_XAP_1500_V1,
-+ BCM47XX_BOARD_LUXUL_XBR_4400_V1,
-+ BCM47XX_BOARD_LUXUL_XVW_P30_V1,
-+ BCM47XX_BOARD_LUXUL_XWR_600_V1,
- BCM47XX_BOARD_LUXUL_XWR_1750_V1,
-
- BCM47XX_BOARD_MICROSOFT_MN700,
+++ /dev/null
-From 272641206100e89656038180da12eff4f03d79d1 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dan.haab@luxul.com>
-Date: Tue, 27 Mar 2018 11:24:34 -0600
-Subject: [PATCH] MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
-
-Some Luxul devices use PCIe connected GPIO LEDs that are not available
-until the PCI subsytem and its drivers load. Using the same array for
-these LEDs would block registering any LEDs until all GPIOs become
-available. This may be undesired behavior as some LEDs should be
-available as early as possible (e.g. system status LED). This patch will
-allow registering available LEDs while deferring these PCIe GPIO
-connected 'extra' LEDs until they become available.
-
-Signed-off-by: Dan Haab <dan.haab@luxul.com>
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/18952/
-Signed-off-by: James Hogan <jhogan@kernel.org>
----
- arch/mips/bcm47xx/leds.c | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -408,6 +408,12 @@ bcm47xx_leds_luxul_xap_1500_v1[] __initc
- };
-
- static const struct gpio_led
-+bcm47xx_leds_luxul_xap1500_v1_extra[] __initconst = {
-+ BCM47XX_GPIO_LED(44, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
- BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
-@@ -434,6 +440,11 @@ bcm47xx_leds_luxul_xwr_1750_v1[] __initc
- BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
- };
-
-+static const struct gpio_led
-+bcm47xx_leds_luxul_xwr1750_v1_extra[] __initconst = {
-+ BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
- /* Microsoft */
-
- static const struct gpio_led
-@@ -527,6 +538,12 @@ static struct gpio_led_platform_data bcm
- bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds); \
- } while (0)
-
-+static struct gpio_led_platform_data bcm47xx_leds_pdata_extra __initdata = {};
-+#define bcm47xx_set_pdata_extra(dev_leds) do { \
-+ bcm47xx_leds_pdata_extra.leds = dev_leds; \
-+ bcm47xx_leds_pdata_extra.num_leds = ARRAY_SIZE(dev_leds); \
-+} while (0)
-+
- void __init bcm47xx_leds_register(void)
- {
- enum bcm47xx_board board = bcm47xx_board_get();
-@@ -704,6 +721,7 @@ void __init bcm47xx_leds_register(void)
- break;
- case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
- bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
-+ bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xap1500_v1_extra);
- break;
- case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
- bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
-@@ -716,6 +734,7 @@ void __init bcm47xx_leds_register(void)
- break;
- case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
- bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
-+ bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xwr1750_v1_extra);
- break;
-
- case BCM47XX_BOARD_MICROSOFT_MN700:
-@@ -759,4 +778,6 @@ void __init bcm47xx_leds_register(void)
- }
-
- gpio_led_register_device(-1, &bcm47xx_leds_pdata);
-+ if (bcm47xx_leds_pdata_extra.num_leds)
-+ gpio_led_register_device(0, &bcm47xx_leds_pdata_extra);
- }
+++ /dev/null
-From 88b882ba0b0b7439d16d2c9df7f111cdf793443b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 8 Apr 2018 22:39:15 +0200
-Subject: [PATCH] MIPS: BCM47XX: Add support for Netgear WNR1000 V3
-
-This adds support for detecting this model board and registers some LEDs
-and buttons.
-
-There are two uncommon things regarding this device:
-1) It can use two different "board_id" ID values.
- Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used
- in firmware file header. There are two reports (one from an OpenWrt
- user) of a different "U12H139T50_NETGEAR" magic though.
-2) Power LEDs share GPIOs with buttons.
- Amber one seems to share GPIO 2 with WPS button and green one seems
- to share GPIO 3 with reset button. It remains unknown how to support
- them and handle buttons at the same time. For that reason they aren't
- added to the list of supported LEDs.
----
- arch/mips/bcm47xx/board.c | 2 ++
- arch/mips/bcm47xx/buttons.c | 9 +++++++++
- arch/mips/bcm47xx/leds.c | 9 +++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
- 4 files changed, 21 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -171,6 +171,8 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T50_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -411,6 +411,12 @@ bcm47xx_buttons_netgear_wndr4500v1[] __i
- };
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wnr1000_v3[] __initconst = {
-+ BCM47XX_GPIO_KEY(2, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = {
- BCM47XX_GPIO_KEY(4, KEY_RESTART),
- BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -669,6 +675,9 @@ int __init bcm47xx_buttons_register(void
- case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
- break;
-+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr1000_v3);
-+ break;
- case BCM47XX_BOARD_NETGEAR_WNR3500L:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
- break;
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -497,6 +497,12 @@ bcm47xx_leds_netgear_wndr4500v1[] __init
- };
-
- static const struct gpio_led
-+bcm47xx_leds_netgear_wnr1000_v3[] __initconst = {
-+ BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(1, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_netgear_wnr3500lv1[] __initconst = {
- BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-@@ -757,6 +763,9 @@ void __init bcm47xx_leds_register(void)
- case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
- break;
-+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr1000_v3);
-+ break;
- case BCM47XX_BOARD_NETGEAR_WNR3500L:
- bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
- break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -109,6 +109,7 @@ enum bcm47xx_board {
- BCM47XX_BOARD_NETGEAR_WNDR4000,
- BCM47XX_BOARD_NETGEAR_WNDR4500V1,
- BCM47XX_BOARD_NETGEAR_WNDR4500V2,
-+ BCM47XX_BOARD_NETGEAR_WNR1000_V3,
- BCM47XX_BOARD_NETGEAR_WNR2000,
- BCM47XX_BOARD_NETGEAR_WNR3500L,
- BCM47XX_BOARD_NETGEAR_WNR3500U,
+++ /dev/null
-From 663beaeacf2552ed07405e69e96a18775e069eab Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 8 Apr 2018 22:51:08 +0200
-Subject: [PATCH] firmware: bcm47xx_nvram: support small (0x6000 B) NVRAM
- partitions
-
-Some old devices with 4 MiB flashes were using 0x1000 block size and
-could use smaller (0x6000 bytes) flash partition for storing NVRAM
-content. This adds support for reading NVRAM on Netgear WNR1000 V3.
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -36,7 +36,7 @@ struct nvram_header {
-
- static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
--static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
-+static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
-
- static u32 find_nvram_size(void __iomem *end)
- {
+++ /dev/null
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -25,6 +25,38 @@
- extern void (*r4k_blast_dcache)(void);
- extern void (*r4k_blast_icache)(void);
-
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+ return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+ unsigned long x;
-+ get_dbe(x, (unsigned long *)addr);;
-+}
-+
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
- * This macro return a properly sign-extended address suitable as base address
- * for indexed cache operations. Two issues here:
-@@ -98,6 +130,7 @@ static inline void flush_icache_line_ind
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Index_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -125,6 +158,7 @@ static inline void flush_icache_line(uns
- static inline void flush_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -132,6 +166,7 @@ static inline void flush_dcache_line(uns
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Invalidate_D, addr);
- __dflush_epilogue
- }
-@@ -187,6 +222,7 @@ static inline void protected_flush_icach
- #ifdef CONFIG_EVA
- protected_cachee_op(Hit_Invalidate_I, addr);
- #else
-+ BCM4710_DUMMY_RREG();
- protected_cache_op(Hit_Invalidate_I, addr);
- #endif
- break;
-@@ -201,6 +237,7 @@ static inline void protected_flush_icach
- */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- #ifdef CONFIG_EVA
- protected_cachee_op(Hit_Writeback_Inv_D, addr);
- #else
-@@ -554,8 +591,51 @@ static inline void invalidate_tcache_pag
- : "r" (base), \
- "i" (op));
-
-+static inline void blast_dcache(void)
-+{
-+ unsigned long start = KSEG0;
-+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+ unsigned long end = (start + dcache_size);
-+
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+
-+ BCM4710_FILL_TLB(start);
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Hit_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+ unsigned long ws_end = current_cpu_data.dcache.ways <<
-+ current_cpu_data.dcache.waybit;
-+ unsigned long ws, addr;
-+ for (ws = 0; ws < ws_end; ws += ws_inc) {
-+ start = page + ws;
-+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, addr);
-+ }
-+ }
-+}
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra) \
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
- static inline void extra##blast_##pfx##cache##lsize(void) \
- { \
- unsigned long start = INDEX_BASE; \
-@@ -567,6 +647,7 @@ static inline void extra##blast_##pfx##c
- \
- __##pfx##flush_prologue \
- \
-+ war \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
- for (addr = start; addr < end; addr += lsize * 32) \
- cache##lsize##_unroll32(addr|ws, indexop); \
-@@ -581,6 +662,7 @@ static inline void extra##blast_##pfx##c
- \
- __##pfx##flush_prologue \
- \
-+ war \
- do { \
- cache##lsize##_unroll32(start, hitop); \
- start += lsize * 32; \
-@@ -599,6 +681,8 @@ static inline void extra##blast_##pfx##c
- current_cpu_data.desc.waybit; \
- unsigned long ws, addr; \
- \
-+ war \
-+ \
- __##pfx##flush_prologue \
- \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
-@@ -608,26 +692,26 @@ static inline void extra##blast_##pfx##c
- __##pfx##flush_epilogue \
- }
-
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
-
- #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
- static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
-@@ -656,17 +740,19 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
- __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
-
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra) \
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2) \
- static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
- unsigned long end) \
- { \
- unsigned long lsize = cpu_##desc##_line_size(); \
- unsigned long addr = start & ~(lsize - 1); \
- unsigned long aend = (end - 1) & ~(lsize - 1); \
-+ war \
- \
- __##pfx##flush_prologue \
- \
- while (1) { \
-+ war2 \
- prot##cache_op(hitop, addr); \
- if (addr == aend) \
- break; \
-@@ -678,8 +764,8 @@ static inline void prot##extra##blast_##
-
- #ifndef CONFIG_EVA
-
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
-
- #else
-
-@@ -716,14 +802,14 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
- __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
-
- #endif
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
- __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
-- protected_, loongson2_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
-+ protected_, loongson2_, , )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
-
- #endif /* _ASM_R4KCACHE_H */
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -365,6 +365,10 @@
- .macro RESTORE_SP_AND_RET
- LONG_L sp, PT_R29(sp)
- .set arch=r4000
-+#ifdef CONFIG_BCM47XX
-+ nop
-+ nop
-+#endif
- eret
- .set mips0
- .endm
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -21,6 +21,19 @@
- #include <asm/war.h>
- #include <asm/thread_info.h>
-
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+# undef eret
-+# endif
-+# define eret \
-+ .set push; \
-+ .set noreorder; \
-+ nop; \
-+ nop; \
-+ eret; \
-+ .set pop;
-+#endif
-+
- __INIT
-
- /*
-@@ -32,6 +45,9 @@
- NESTED(except_vec3_generic, 0, sp)
- .set push
- .set noat
-+#ifdef CONFIG_BCM47XX
-+ nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- mfc0 k0, CP0_INDEX
- #endif
-@@ -55,6 +71,9 @@ NESTED(except_vec3_r4000, 0, sp)
- .set push
- .set arch=r4000
- .set noat
-+#ifdef CONFIG_BCM47XX
-+ nop
-+#endif
- mfc0 k1, CP0_CAUSE
- li k0, 31<<2
- andi k1, k1, 0x7c
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -39,6 +39,9 @@
- #include <asm/dma-coherence.h>
- #include <asm/mips-cm.h>
-
-+/* For enabling BCM4710 cache workarounds */
-+static int bcm4710 = 0;
-+
- /*
- * Bits describing what cache ops an IPI callback function may perform.
- *
-@@ -202,6 +205,9 @@ static void r4k_blast_dcache_user_page_s
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page = blast_dcache_page;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_user_page = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -220,6 +226,9 @@ static void r4k_blast_dcache_page_indexe
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_page_indexed = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -239,6 +248,9 @@ static void r4k_blast_dcache_setup(void)
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache = blast_dcache;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -880,6 +892,8 @@ static void local_r4k_flush_cache_sigtra
- unsigned long addr = (unsigned long) arg;
-
- R4600_HIT_CACHEOP_WAR_IMPL;
-+ BCM4710_PROTECTED_FILL_TLB(addr);
-+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
- if (dc_lsize)
- protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1704,6 +1718,17 @@ static void coherency_setup(void)
- * silly idea of putting something else there ...
- */
- switch (current_cpu_type()) {
-+ case CPU_BMIPS3300:
-+ {
-+ u32 cm;
-+ cm = read_c0_diag();
-+ /* Enable icache */
-+ cm |= (1 << 31);
-+ /* Enable dcache */
-+ cm |= (1 << 30);
-+ write_c0_diag(cm);
-+ }
-+ break;
- case CPU_R4000PC:
- case CPU_R4000SC:
- case CPU_R4000MC:
-@@ -1750,6 +1775,15 @@ void r4k_cache_init(void)
- extern void build_copy_page(void);
- struct cpuinfo_mips *c = ¤t_cpu_data;
-
-+ /* Check if special workarounds are required */
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
-+ printk("Enabling BCM4710A0 cache workarounds.\n");
-+ bcm4710 = 1;
-+ } else
-+#endif
-+ bcm4710 = 0;
-+
- probe_pcache();
- setup_scache();
-
-@@ -1819,7 +1853,15 @@ void r4k_cache_init(void)
- */
- local_r4k___flush_cache_all(NULL);
-
-+#ifdef CONFIG_BCM47XX
-+ {
-+ static void (*_coherency_setup)(void);
-+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+ _coherency_setup();
-+ }
-+#else
- coherency_setup();
-+#endif
- board_cache_error_setup = r4k_cache_error_setup;
-
- /*
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -960,6 +960,9 @@ build_get_pgde32(u32 **p, unsigned int t
- uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
- uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -1301,6 +1304,9 @@ static void build_r4000_tlb_refill_handl
- #ifdef CONFIG_64BIT
- build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+# endif
- build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
-
-@@ -1312,6 +1318,9 @@ static void build_r4000_tlb_refill_handl
- build_update_entries(&p, K0, K1);
- build_tlb_write_entry(&p, &l, &r, tlb_random);
- uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+#endif
- uasm_i_eret(&p); /* return from trap */
- }
- #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-@@ -1888,6 +1897,9 @@ build_r4000_tlbchange_handler_head(u32 *
- #ifdef CONFIG_64BIT
- build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+# endif
- build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
- #endif
-
-@@ -1934,6 +1946,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- build_tlb_write_entry(p, l, r, tlb_indexed);
- uasm_l_leave(l, *p);
- build_restore_work_registers(p);
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- uasm_i_eret(p); /* return from trap */
-
- #ifdef CONFIG_64BIT
+++ /dev/null
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] kmap_coherent
-
-On ASUS WL-500gP there are some "Data bus error"s when executing simple
-commands liks "ps" or "cat /proc/1/cmdline".
-
-This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
----
---- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -160,6 +160,9 @@
- #ifndef cpu_has_local_ebase
- #define cpu_has_local_ebase 1
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
-
- /*
- * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
---- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -79,4 +79,6 @@
- #define cpu_scache_line_size() 0
- #define cpu_has_vz 0
-
-+#define cpu_use_kmap_coherent 0
-+
- #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -645,7 +645,7 @@ static inline void local_r4k_flush_cache
- */
- map_coherent = (cpu_has_dc_aliases &&
- page_mapped(page) && !Page_dcache_dirty(page));
-- if (map_coherent)
-+ if (map_coherent && cpu_use_kmap_coherent)
- vaddr = kmap_coherent(page, addr);
- else
- vaddr = kmap_atomic(page);
-@@ -670,7 +670,7 @@ static inline void local_r4k_flush_cache
- }
-
- if (vaddr) {
-- if (map_coherent)
-+ if (map_coherent && cpu_use_kmap_coherent)
- kunmap_coherent();
- else
- kunmap_atomic(vaddr);
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -164,7 +164,7 @@ void copy_user_highpage(struct page *to,
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
-@@ -186,7 +186,7 @@ void copy_to_user_page(struct vm_area_st
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(page) && !Page_dcache_dirty(page)) {
- void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(vto, src, len);
-@@ -204,7 +204,7 @@ void copy_from_user_page(struct vm_area_
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(page) && !Page_dcache_dirty(page)) {
- void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(dst, vfrom, len);
+++ /dev/null
-From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 9 Nov 2013 17:03:59 +0100
-Subject: [PATCH 210/210] b44: register adm switch
-
----
- drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/b44.h | 3 ++
- 2 files changed, 60 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -31,6 +31,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/slab.h>
- #include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/adm6996-gpio.h>
-
- #include <asm/uaccess.h>
- #include <asm/io.h>
-@@ -2240,6 +2242,69 @@ static void b44_adjust_link(struct net_d
- }
- }
-
-+#ifdef CONFIG_BCM47XX
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+ int gpio;
-+ struct platform_device *pdev;
-+ struct adm6996_gpio_platform_data adm_data = {0};
-+ struct platform_device_info info = {0};
-+
-+ adm_data.model = ADM6996L;
-+ gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
-+ if (gpio >= 0)
-+ adm_data.eecs = gpio;
-+ else
-+ adm_data.eecs = 2;
-+
-+ gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
-+ if (gpio >= 0)
-+ adm_data.eesk = gpio;
-+ else
-+ adm_data.eesk = 3;
-+
-+ gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
-+ if (gpio >= 0)
-+ adm_data.eedi = gpio;
-+ else
-+ adm_data.eedi = 4;
-+
-+ /*
-+ * We ignore the "adm_rc" GPIO here. The driver does not use it,
-+ * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
-+ */
-+
-+ info.parent = bp->sdev->dev;
-+ info.name = "adm6996_gpio";
-+ info.id = -1;
-+ info.data = &adm_data;
-+ info.size_data = sizeof(adm_data);
-+
-+ if (!bp->adm_switch) {
-+ pdev = platform_device_register_full(&info);
-+ if (IS_ERR(pdev))
-+ return PTR_ERR(pdev);
-+
-+ bp->adm_switch = pdev;
-+ }
-+ return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+ if (bp->adm_switch)
-+ platform_device_unregister(bp->adm_switch);
-+}
-+#else
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+ return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+
-+}
-+#endif /* CONFIG_BCM47XX */
-+
- static int b44_register_phy_one(struct b44 *bp)
- {
- struct mii_bus *mii_bus;
-@@ -2283,6 +2348,9 @@ static int b44_register_phy_one(struct b
- if (!bp->mii_bus->phy_map[bp->phy_addr] &&
- (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
-
-+ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
-+ b44_register_adm_switch(bp);
-+
- dev_info(sdev->dev,
- "could not find PHY at %i, use fixed one\n",
- bp->phy_addr);
-@@ -2479,6 +2547,7 @@ static void b44_remove_one(struct ssb_de
- unregister_netdev(dev);
- if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- b44_unregister_phy_one(bp);
-+ b44_unregister_adm_switch(bp);
- ssb_device_disable(sdev, 0);
- ssb_bus_may_powerdown(sdev->bus);
- netif_napi_del(&bp->napi);
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -408,6 +408,9 @@ struct b44 {
- struct mii_bus *mii_bus;
- int old_link;
- struct mii_if_info mii_if;
-+
-+ /* platform device for associated switch */
-+ struct platform_device *adm_switch;
- };
-
- #endif /* _B44_H */
+++ /dev/null
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
- error:
- pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+ char buf[20];
-+ struct ssb_device *sdev = bp->sdev;
-+
-+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+ if (sdev->bus->sprom.board_num == 100) {
-+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+ } else {
-+ /* WL-HDD */
-+ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
-+ !strncmp(buf, "WL300-", strlen("WL300-"))) {
-+ if (sdev->bus->sprom.et0phyaddr == 0 &&
-+ sdev->bus->sprom.et1phyaddr == 1)
-+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+ }
-+ }
-+ return;
-+}
- #else
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
-
- static int b44_setup_phy(struct b44 *bp)
-@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
- int err;
-
- b44_wap54g10_workaround(bp);
-+ b44_bcm47xx_workarounds(bp);
-
- if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- return 0;
-@@ -2170,6 +2195,8 @@ static int b44_get_invariants(struct b44
- * valid PHY address. */
- bp->phy_addr &= 0x1F;
-
-+ b44_bcm47xx_workarounds(bp);
-+
- memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
-
- if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
+++ /dev/null
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -33,6 +33,7 @@ config BCMA_HOST_PCI
- config BCMA_HOST_SOC
- bool "Support for BCMA in a SoC"
- depends on BCMA
-+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
- help
- Host interface for a Broadcom AIX bus directly mapped into
- the memory. This only works with the Broadcom SoCs from the
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -156,6 +156,7 @@ config SSB_SFLASH
- config SSB_EMBEDDED
- bool
- depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
-+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
- default y
-
- config SSB_DRIVER_EXTIF
+++ /dev/null
-From: Wolfram Joost <dbox2@frokaschwei.de>
-Subject: [PATCH] fork_cacheflush
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -46,7 +46,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
+++ /dev/null
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] no highpage
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
- #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
-
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
-
- extern void build_clear_page(void);
- extern void build_copy_page(void);
-@@ -105,11 +106,16 @@ static inline void clear_user_page(void
- flush_data_cache_page((unsigned long)addr);
- }
-
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+ struct page *to)
-+{
-+ extern void (*flush_data_cache_page)(unsigned long addr);
-
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+ copy_page(vto, vfrom);
-+ if (!cpu_has_ic_fills_f_dc ||
-+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+ flush_data_cache_page((unsigned long)vto);
-+}
-
- /*
- * These are used to make use of C type-checking..
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -158,30 +158,6 @@ void kunmap_coherent(void)
- preempt_enable();
- }
-
--void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma)
--{
-- void *vfrom, *vto;
--
-- vto = kmap_atomic(to);
-- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
-- page_mapped(from) && !Page_dcache_dirty(from)) {
-- vfrom = kmap_coherent(from, vaddr);
-- copy_page(vto, vfrom);
-- kunmap_coherent();
-- } else {
-- vfrom = kmap_atomic(from);
-- copy_page(vto, vfrom);
-- kunmap_atomic(vfrom);
-- }
-- if ((!cpu_has_ic_fills_f_dc) ||
-- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-- flush_data_cache_page((unsigned long)vto);
-- kunmap_atomic(vto);
-- /* Make sure this page is cleared on other CPU's too before using it */
-- smp_wmb();
--}
--
- void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
+++ /dev/null
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -140,6 +140,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
- {{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
- {{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
-@@ -159,9 +160,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"},
- {{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
- {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
-+ {{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -26,6 +26,12 @@
- /* Asus */
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_asus_rtn10u[] __initconst = {
-+ BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(21, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_asus_rtn12[] __initconst = {
- BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
- BCM47XX_GPIO_KEY(1, KEY_RESTART),
-@@ -276,6 +282,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
- };
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
- BCM47XX_GPIO_KEY(5, KEY_WIMAX),
- BCM47XX_GPIO_KEY(6, KEY_RESTART),
-@@ -384,6 +402,17 @@ bcm47xx_buttons_motorola_wr850gv2v3[] __
- /* Netgear */
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(12, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
- BCM47XX_GPIO_KEY(4, KEY_RESTART),
- BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -470,6 +499,9 @@ int __init bcm47xx_buttons_register(void
- int err;
-
- switch (board) {
-+ case BCM47XX_BOARD_ASUS_RTN10U:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
-+ break;
- case BCM47XX_BOARD_ASUS_RTN12:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
- break;
-@@ -600,6 +632,12 @@ int __init bcm47xx_buttons_register(void
- case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRT310NV2:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
- break;
-@@ -663,6 +701,12 @@ int __init bcm47xx_buttons_register(void
- err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
- break;
-
-+ case BCM47XX_BOARD_NETGEAR_R6300_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
-+ break;
-+ case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
-+ break;
- case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
- break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -71,6 +71,7 @@ enum bcm47xx_board {
- BCM47XX_BOARD_LINKSYS_WRT300NV11,
- BCM47XX_BOARD_LINKSYS_WRT310NV1,
- BCM47XX_BOARD_LINKSYS_WRT310NV2,
-+ BCM47XX_BOARD_LINKSYS_WRT320N_V1,
- BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
- BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
-@@ -97,9 +98,12 @@ enum bcm47xx_board {
- BCM47XX_BOARD_MOTOROLA_WR850GP,
- BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
-
-+ BCM47XX_BOARD_NETGEAR_R6300_V1,
- BCM47XX_BOARD_NETGEAR_WGR614V8,
- BCM47XX_BOARD_NETGEAR_WGR614V9,
- BCM47XX_BOARD_NETGEAR_WGR614_V10,
-+ BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
-+ BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
- BCM47XX_BOARD_NETGEAR_WNDR3300,
- BCM47XX_BOARD_NETGEAR_WNDR3400V1,
- BCM47XX_BOARD_NETGEAR_WNDR3400V2,
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -29,6 +29,14 @@
- /* Asus */
-
- static const struct gpio_led
-+bcm47xx_leds_asus_rtn10u[] __initconst = {
-+ BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_asus_rtn12[] __initconst = {
- BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -313,6 +321,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
- };
-
- static const struct gpio_led
-+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-@@ -555,6 +570,9 @@ void __init bcm47xx_leds_register(void)
- enum bcm47xx_board board = bcm47xx_board_get();
-
- switch (board) {
-+ case BCM47XX_BOARD_ASUS_RTN10U:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
-+ break;
- case BCM47XX_BOARD_ASUS_RTN12:
- bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
- break;
-@@ -688,6 +706,9 @@ void __init bcm47xx_leds_register(void)
- case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
- break;
+++ /dev/null
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -217,6 +217,7 @@ static int bcm47xxpart_parse(struct mtd_
- int trx_num = 0; /* Number of found TRX partitions */
- int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
- int err;
-+ bool found_nvram = false;
-
- /*
- * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-@@ -398,12 +399,23 @@ static int bcm47xxpart_parse(struct mtd_
- if (buf[0] == NVRAM_HEADER) {
- bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- master->size - blocksize, 0);
-+ found_nvram = true;
- break;
- }
- }
-
- kfree(buf);
-
-+ if (!found_nvram) {
-+ pr_err("can not find a nvram partition reserve last block\n");
-+ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
-+ master->size - blocksize * 2, MTD_WRITEABLE);
-+ for (i = 0; i < curr_part; i++) {
-+ if (parts[i].size + parts[i].offset == master->size)
-+ parts[i].offset -= blocksize * 2;
-+ }
-+ }
-+
- /*
- * Assume that partitions end at the beginning of the one they are
- * followed by.
+++ /dev/null
-From: b.sander
-Subject: [PATCH] pci: IDE fix
-
-These are standard probing messages when using pdc202xx_old:
-pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
-PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
-PCI: Fixing up device 0000:00:01.0
-0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
-0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
-pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
-
-With the default MAX_HWIFS value after above we get:
- ide2: BM-DMA at 0x0400-0x0407
- ide3: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide2...
-hde: CF500, CFA DISK drive
-
-As you can see it's ide2 + ide3 and hde.
-
-With this patch applied we get:
- ide0: BM-DMA at 0x0400-0x0407
- ide1: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide0...
-hda: CF500, CFA DISK drive
-
-This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
----
---- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -204,7 +204,11 @@ static inline void ide_std_init_ports(st
- hw->io_ports.ctl_addr = ctl_addr;
- }
-
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS 2
-+#else
- #define MAX_HWIFS 10
-+#endif
-
- /*
- * Now for the data we need to maintain per-drive: ide_drive_t
+++ /dev/null
-When the Ethernet controller is powered down and someone wants to
-access the mdio bus like the witch driver (b53) the system crashed if
-PCI_D3hot was set before. This patch deactivates this power sawing mode
-when a switch driver is in use.
-
---- a/drivers/net/ethernet/broadcom/tg3.c
-+++ b/drivers/net/ethernet/broadcom/tg3.c
-@@ -4263,7 +4263,8 @@ static int tg3_power_down_prepare(struct
- static void tg3_power_down(struct tg3 *tp)
- {
- pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
-- pci_set_power_state(tp->pdev, PCI_D3hot);
-+ if (!tg3_flag(tp, ROBOSWITCH))
-+ pci_set_power_state(tp->pdev, PCI_D3hot);
- }
-
- static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
+++ /dev/null
-From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 20 Nov 2014 21:32:42 +0100
-Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/drivers/bcma/driver_chipcommon_sflash.c
-+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -9,6 +9,7 @@
-
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
-+#include <bcm47xx_board.h>
-
- static struct resource bcma_sflash_resource = {
- .name = "bcma_sflash",
-@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc
- { NULL },
- };
-
-+/* Some devices use smaller blocks (and have more of them) */
-+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
-+ { "M25P16", 0x14, 0x1000, 512, },
-+ { "M25P32", 0x15, 0x1000, 1024, },
-+ { NULL },
-+};
-+
- static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
- { "SST25WF512", 1, 0x1000, 16, },
- { "SST25VF512", 0x48, 0x1000, 16, },
-@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_
- bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
- }
-
-+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+ const struct bcma_sflash_tbl_e *e;
-+
-+ switch (board) {
-+ case BCM47XX_BOARD_NETGEAR_WGR614_V10:
-+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+ for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
-+ if (e->id == id)
-+ return e;
-+ }
-+ return NULL;
-+ default:
-+ return NULL;
-+ }
-+}
-+
- /* Initialize serial flash access */
- int bcma_sflash_init(struct bcma_drv_cc *cc)
- {
-@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc
- case 0x13:
- return -ENOTSUPP;
- default:
-+ e = bcma_sflash_shrink_flash(id);
-+ if (e)
-+ break;
-+
- for (e = bcma_sflash_st_tbl; e->name; e++) {
- if (e->id == id)
- break;
+++ /dev/null
-The Netgear wgt634u uses a different format for storing the
-configuration. This patch is needed to read out the correct
-configuration. The cfe_env.c file uses a different method way to read
-out the configuration than the in kernel cfe config reader.
-
---- a/drivers/firmware/broadcom/Makefile
-+++ b/drivers/firmware/broadcom/Makefile
-@@ -1 +1 @@
--obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
-+obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o cfe_env.o
---- /dev/null
-+++ b/drivers/firmware/broadcom/cfe_env.c
-@@ -0,0 +1,228 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <nbd@nbd.name>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+#define NVRAM_SIZE (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types. These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ *
-+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
-+ * indicates the size of the length field.
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
-+#define ENV_LENGTH_8BITS 0x01
-+
-+#define ENV_TYPE_USER 0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END 0x00
-+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags
-+ */
-+
-+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
-+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
-+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
-+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
-+
-+
-+/* *********************************************************************
-+ * _nvram_read(buffer,offset,length)
-+ *
-+ * Read data from the NVRAM device
-+ *
-+ * Input parameters:
-+ * buffer - destination buffer
-+ * offset - offset of data to read
-+ * length - number of bytes to read
-+ *
-+ * Return value:
-+ * number of bytes read, or <0 if error occured
-+ ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+ int i;
-+ if (offset > NVRAM_SIZE)
-+ return -1;
-+
-+ for ( i = 0; i < length; i++) {
-+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+ }
-+ return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+ while (*dest && (cnt > 0)) {
-+ if (*dest == c) return (char *) dest;
-+ dest++;
-+ cnt--;
-+ }
-+ return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param name name of variable to get
-+ * @return value of variable or NULL if undefined
-+ */
-+
-+char *cfe_env_get(unsigned char *nv_buf, const char *name)
-+{
-+ int size;
-+ unsigned char *buffer;
-+ unsigned char *ptr;
-+ unsigned char *envval;
-+ unsigned int reclen;
-+ unsigned int rectype;
-+ int offset;
-+ int flg;
-+
-+ if (!strcmp(name, "nvram_type"))
-+ return "cfe";
-+
-+ size = NVRAM_SIZE;
-+ buffer = &_nvdata[0];
-+
-+ ptr = buffer;
-+ offset = 0;
-+
-+ /* Read the record type and length */
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+ goto error;
-+ }
-+
-+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
-+
-+ /* Adjust pointer for TLV type */
-+ rectype = *(ptr);
-+ offset++;
-+ size--;
-+
-+ /*
-+ * Read the length. It can be either 1 or 2 bytes
-+ * depending on the code
-+ */
-+ if (rectype & ENV_LENGTH_8BITS) {
-+ /* Read the record type and length - 8 bits */
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+ goto error;
-+ }
-+ reclen = *(ptr);
-+ size--;
-+ offset++;
-+ }
-+ else {
-+ /* Read the record type and length - 16 bits, MSB first */
-+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+ goto error;
-+ }
-+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+ size -= 2;
-+ offset += 2;
-+ }
-+
-+ if (reclen > size)
-+ break; /* should not happen, bad NVRAM */
-+
-+ switch (rectype) {
-+ case ENV_TLV_TYPE_ENV:
-+ /* Read the TLV data */
-+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+ goto error;
-+ flg = *ptr++;
-+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+ if (envval) {
-+ *envval++ = '\0';
-+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0
-+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+ if(!strcmp(ptr, name)){
-+ return _valuestr;
-+ }
-+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+ return _valuestr;
-+ }
-+ break;
-+
-+ default:
-+ /* Unknown TLV type, skip it. */
-+ break;
-+ }
-+
-+ /*
-+ * Advance to next TLV
-+ */
-+
-+ size -= (int)reclen;
-+ offset += reclen;
-+
-+ /* Read the next record type */
-+ ptr = buffer;
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+ goto error;
-+ }
-+
-+error:
-+ return NULL;
-+
-+}
-+
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -37,6 +37,8 @@ struct nvram_header {
- static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
-
- static u32 find_nvram_size(void __iomem *end)
- {
-@@ -66,6 +68,26 @@ static int nvram_find_and_copy(void __io
- return -EEXIST;
- }
-
-+ cfe_env = 0;
-+
-+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+ if (lim >= 8 * 1024 * 1024) {
-+ src = (u32 *)(iobase + 8 * 1024 * 1024 - 0x2000);
-+ dst = (u32 *)nvram_buf;
-+
-+ if ((*src & 0xff00ff) == 0x000001) {
-+ printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+ for (i = 0; i < 0x1ff0; i++) {
-+ if (*src == 0xFFFFFFFF)
-+ break;
-+ *dst++ = *src++;
-+ }
-+ cfe_env = 1;
-+ return 0;
-+ }
-+ }
-+
- /* TODO: when nvram is on nand flash check for bad blocks first. */
- off = FLASH_MIN;
- while (off <= lim) {
-@@ -180,6 +202,13 @@ int bcm47xx_nvram_getenv(const char *nam
- if (!name)
- return -EINVAL;
-
-+ if (cfe_env) {
-+ value = cfe_env_get(nvram_buf, name);
-+ if (!value)
-+ return -ENOENT;
-+ return snprintf(val, val_len, "%s", value);
-+ }
-+
- if (!nvram_len) {
- err = nvram_init();
- if (err)
+++ /dev/null
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -36,6 +36,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-+#include <linux/old_gpio_wdt.h>
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
- #include <asm/prom.h>
-@@ -262,6 +263,33 @@ static struct fixed_phy_status bcm47xx_f
- .duplex = DUPLEX_FULL,
- };
-
-+static struct gpio_wdt_platform_data gpio_wdt_data;
-+
-+static struct platform_device gpio_wdt_device = {
-+ .name = "gpio-wdt",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gpio_wdt_data,
-+ },
-+};
-+
-+static int __init bcm47xx_register_gpio_watchdog(void)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+
-+ switch (board) {
-+ case BCM47XX_BOARD_HUAWEI_E970:
-+ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
-+ gpio_wdt_data.gpio = 7;
-+ gpio_wdt_data.interval = HZ;
-+ gpio_wdt_data.first_interval = HZ / 5;
-+ return platform_device_register(&gpio_wdt_device);
-+ default:
-+ /* Nothing to do */
-+ return 0;
-+ }
-+}
-+
- static int __init bcm47xx_register_bus_complete(void)
- {
- switch (bcm47xx_bus_type) {
-@@ -281,6 +309,7 @@ static int __init bcm47xx_register_bus_c
- bcm47xx_workarounds();
-
- fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1);
-+ bcm47xx_register_gpio_watchdog();
- return 0;
- }
- device_initcall(bcm47xx_register_bus_complete);
---- a/arch/mips/configs/bcm47xx_defconfig
-+++ b/arch/mips/configs/bcm47xx_defconfig
-@@ -67,6 +67,7 @@ CONFIG_HW_RANDOM=y
- CONFIG_GPIO_SYSFS=y
- CONFIG_WATCHDOG=y
- CONFIG_BCM47XX_WDT=y
-+CONFIG_GPIO_WDT=y
- CONFIG_SSB_DEBUG=y
- CONFIG_SSB_DRIVER_GIGE=y
- CONFIG_BCMA_DRIVER_GMAC_CMN=y
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
- }
- EXPORT_SYMBOL(ssb_watchdog_timer_set);
-
-+#ifdef CONFIG_BCM47XX
-+#include <bcm47xx_board.h>
-+
-+static bool ssb_watchdog_supported(void)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+
-+ /* The Huawei E970 has a hardware watchdog using a GPIO */
-+ switch (board) {
-+ case BCM47XX_BOARD_HUAWEI_E970:
-+ return false;
-+ default:
-+ return true;
-+ }
-+}
-+#else
-+static bool ssb_watchdog_supported(void)
-+{
-+ return true;
-+}
-+#endif
-+
- int ssb_watchdog_register(struct ssb_bus *bus)
- {
- struct bcm47xx_wdt wdt = {};
- struct platform_device *pdev;
-
-+ if (!ssb_watchdog_supported())
-+ return 0;
-+
- if (ssb_chipco_available(&bus->chipco)) {
- wdt.driver_data = &bus->chipco;
- wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
+++ /dev/null
-This generic GPIO watchdog is used on Huawei E970 (brcm47xx)
-
-Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1216,6 +1216,15 @@ config WDT_MTX1
- Hardware driver for the MTX-1 boards. This is a watchdog timer that
- will reboot the machine after a 100 seconds timer expired.
-
-+config GPIO_WDT
-+ tristate "GPIO Hardware Watchdog"
-+ help
-+ Hardware driver for GPIO-controlled watchdogs. GPIO pin and
-+ toggle interval settings are platform-specific. The driver
-+ will stop toggling the GPIO (i.e. machine reboots) after a
-+ 100 second timer expired and no process has written to
-+ /dev/watchdog during that time.
-+
- config PNX833X_WDT
- tristate "PNX833x Hardware Watchdog"
- depends on SOC_PNX8335
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -140,6 +140,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
-+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/old_gpio_wdt.c
-@@ -0,0 +1,301 @@
-+/*
-+ * Driver for GPIO-controlled Hardware Watchdogs.
-+ *
-+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ * Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
-+ *
-+ * (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
-+ * All Rights Reserved.
-+ * http://www.4g-systems.biz
-+ *
-+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ *
-+ * Neither Michael Stickel nor 4G Systems admit liability nor provide
-+ * warranty for any of this software. This material is provided
-+ * "AS-IS" and at no charge.
-+ *
-+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
-+ *
-+ * Release 0.01.
-+ * Author: Michael Stickel michael.stickel@4g-systems.biz
-+ *
-+ * Release 0.02.
-+ * Author: Florian Fainelli florian@openwrt.org
-+ * use the Linux watchdog/timer APIs
-+ *
-+ * Release 0.03.
-+ * Author: Mathias Adam <m.adam--linux@adamis.de>
-+ * make it a generic gpio watchdog driver
-+ *
-+ * The Watchdog is configured to reset the MTX-1
-+ * if it is not triggered for 100 seconds.
-+ * It should not be triggered more often than 1.6 seconds.
-+ *
-+ * A timer triggers the watchdog every 5 seconds, until
-+ * it is opened for the first time. After the first open
-+ * it MUST be triggered every 2..95 seconds.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/timer.h>
-+#include <linux/completion.h>
-+#include <linux/jiffies.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+#include <linux/gpio.h>
-+#include <linux/old_gpio_wdt.h>
-+
-+static int ticks = 100 * HZ;
-+
-+static struct {
-+ struct completion stop;
-+ spinlock_t lock;
-+ int running;
-+ struct timer_list timer;
-+ int queue;
-+ int default_ticks;
-+ unsigned long inuse;
-+ unsigned gpio;
-+ unsigned int gstate;
-+ int interval;
-+ int first_interval;
-+} gpio_wdt_device;
-+
-+static void gpio_wdt_trigger(unsigned long unused)
-+{
-+ spin_lock(&gpio_wdt_device.lock);
-+ if (gpio_wdt_device.running && ticks > 0)
-+ ticks -= gpio_wdt_device.interval;
-+
-+ /* toggle wdt gpio */
-+ gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
-+ gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
-+
-+ if (gpio_wdt_device.queue && ticks > 0)
-+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
-+ else
-+ complete(&gpio_wdt_device.stop);
-+ spin_unlock(&gpio_wdt_device.lock);
-+}
-+
-+static void gpio_wdt_reset(void)
-+{
-+ ticks = gpio_wdt_device.default_ticks;
-+}
-+
-+
-+static void gpio_wdt_start(void)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+ if (!gpio_wdt_device.queue) {
-+ gpio_wdt_device.queue = 1;
-+ gpio_wdt_device.gstate = 1;
-+ gpio_set_value(gpio_wdt_device.gpio, 1);
-+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
-+ }
-+ gpio_wdt_device.running++;
-+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+}
-+
-+static int gpio_wdt_stop(void)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+ if (gpio_wdt_device.queue) {
-+ gpio_wdt_device.queue = 0;
-+ gpio_wdt_device.gstate = 0;
-+ gpio_set_value(gpio_wdt_device.gpio, 0);
-+ }
-+ ticks = gpio_wdt_device.default_ticks;
-+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+ return 0;
-+}
-+
-+/* Filesystem functions */
-+
-+static int gpio_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(0, &gpio_wdt_device.inuse))
-+ return -EBUSY;
-+ return nonseekable_open(inode, file);
-+}
-+
-+
-+static int gpio_wdt_release(struct inode *inode, struct file *file)
-+{
-+ clear_bit(0, &gpio_wdt_device.inuse);
-+ return 0;
-+}
-+
-+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = (int __user *)argp;
-+ unsigned int value;
-+ static const struct watchdog_info ident = {
-+ .options = WDIOF_CARDRESET,
-+ .identity = "GPIO WDT",
-+ };
-+
-+ switch (cmd) {
-+ case WDIOC_GETSUPPORT:
-+ if (copy_to_user(argp, &ident, sizeof(ident)))
-+ return -EFAULT;
-+ break;
-+ case WDIOC_GETSTATUS:
-+ case WDIOC_GETBOOTSTATUS:
-+ put_user(0, p);
-+ break;
-+ case WDIOC_SETOPTIONS:
-+ if (get_user(value, p))
-+ return -EFAULT;
-+ if (value & WDIOS_ENABLECARD)
-+ gpio_wdt_start();
-+ else if (value & WDIOS_DISABLECARD)
-+ gpio_wdt_stop();
-+ else
-+ return -EINVAL;
-+ return 0;
-+ case WDIOC_KEEPALIVE:
-+ gpio_wdt_reset();
-+ break;
-+ default:
-+ return -ENOTTY;
-+ }
-+ return 0;
-+}
-+
-+
-+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ if (!count)
-+ return -EIO;
-+ gpio_wdt_reset();
-+ return count;
-+}
-+
-+static const struct file_operations gpio_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .unlocked_ioctl = gpio_wdt_ioctl,
-+ .open = gpio_wdt_open,
-+ .write = gpio_wdt_write,
-+ .release = gpio_wdt_release,
-+};
-+
-+
-+static struct miscdevice gpio_wdt_misc = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &gpio_wdt_fops,
-+};
-+
-+
-+static int gpio_wdt_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+ struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
-+
-+ gpio_wdt_device.gpio = gpio_wdt_data->gpio;
-+ gpio_wdt_device.interval = gpio_wdt_data->interval;
-+ gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
-+ if (gpio_wdt_device.first_interval <= 0) {
-+ gpio_wdt_device.first_interval = gpio_wdt_device.interval;
-+ }
-+
-+ ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to request gpio");
-+ return ret;
-+ }
-+
-+ spin_lock_init(&gpio_wdt_device.lock);
-+ init_completion(&gpio_wdt_device.stop);
-+ gpio_wdt_device.queue = 0;
-+ clear_bit(0, &gpio_wdt_device.inuse);
-+ setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
-+ gpio_wdt_device.default_ticks = ticks;
-+
-+ gpio_wdt_start();
-+ dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
-+ gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
-+ return 0;
-+}
-+
-+static int gpio_wdt_remove(struct platform_device *pdev)
-+{
-+ /* FIXME: do we need to lock this test ? */
-+ if (gpio_wdt_device.queue) {
-+ gpio_wdt_device.queue = 0;
-+ wait_for_completion(&gpio_wdt_device.stop);
-+ }
-+
-+ gpio_free(gpio_wdt_device.gpio);
-+ misc_deregister(&gpio_wdt_misc);
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_wdt_driver = {
-+ .probe = gpio_wdt_probe,
-+ .remove = gpio_wdt_remove,
-+ .driver.name = "gpio-wdt",
-+ .driver.owner = THIS_MODULE,
-+};
-+
-+static int __init gpio_wdt_init(void)
-+{
-+ return platform_driver_register(&gpio_wdt_driver);
-+}
-+arch_initcall(gpio_wdt_init);
-+
-+/*
-+ * We do wdt initialization in two steps: arch_initcall probes the wdt
-+ * very early to start pinging the watchdog (misc devices are not yet
-+ * available), and later module_init() just registers the misc device.
-+ */
-+static int gpio_wdt_init_late(void)
-+{
-+ int ret;
-+
-+ ret = misc_register(&gpio_wdt_misc);
-+ if (ret < 0) {
-+ pr_err("GPIO_WDT: failed to register misc device\n");
-+ return ret;
-+ }
-+ return 0;
-+}
-+#ifndef MODULE
-+module_init(gpio_wdt_init_late);
-+#endif
-+
-+static void __exit gpio_wdt_exit(void)
-+{
-+ platform_driver_unregister(&gpio_wdt_driver);
-+}
-+module_exit(gpio_wdt_exit);
-+
-+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
-+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:gpio-wdt");
---- /dev/null
-+++ b/include/linux/old_gpio_wdt.h
-@@ -0,0 +1,21 @@
-+/*
-+ * Definitions for the GPIO watchdog driver
-+ *
-+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef _GPIO_WDT_H_
-+#define _GPIO_WDT_H_
-+
-+struct gpio_wdt_platform_data {
-+ int gpio; /* GPIO line number */
-+ int interval; /* watchdog reset interval in system ticks */
-+ int first_interval; /* first wd reset interval in system ticks */
-+};
-+
-+#endif /* _GPIO_WDT_H_ */
+++ /dev/null
-From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 8 Apr 2015 06:58:11 +0200
-Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-If SoC has a CardBus we can set resources of device at slot 1 only. It's
-impossigle to set bridge resources as it simply overwrites device 1
-configuration and usually results in Data bus error-s.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/ssb/driver_pcicore.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc
- SSB_WARN_ON(!pc->hostmode);
- if (unlikely(len != 1 && len != 2 && len != 4))
- goto out;
-+ /* CardBus SoCs allow configuring dev 1 resources only */
-+ if (extpci_core->cardbusmode && dev != 1 &&
-+ off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5)
-+ goto out;
- addr = get_cfgspace_addr(pc, bus, dev, func, off);
- if (unlikely(!addr))
- goto out;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 18 Dec 2015 07:51:08 +0100
-Subject: [PATCH] Revert "bcma: switch GPIO portions to use GPIOLIB_IRQCHIP"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit 74f4e0cc61080f63f28e8d519bdf437957e64217.
-
-On BCM47XX (MIPS) bcma_bus_get_host_dev returns NULL which results in:
-[ 0.157054] missing gpiochip .dev parent pointer
-[ 0.157287] bcma: bus0: Error registering GPIO driver: -22
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/bcma/Kconfig | 2 +-
- drivers/bcma/driver_gpio.c | 92 +++++++++++++++++++----------
- include/linux/bcma/bcma_driver_chipcommon.h | 1 +
- 3 files changed, 64 insertions(+), 31 deletions(-)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -106,7 +106,7 @@ config BCMA_DRIVER_GMAC_CMN
- config BCMA_DRIVER_GPIO
- bool "BCMA GPIO driver"
- depends on BCMA && GPIOLIB
-- select GPIOLIB_IRQCHIP if BCMA_HOST_SOC
-+ select IRQ_DOMAIN if BCMA_HOST_SOC
- help
- Driver to provide access to the GPIO pins of the bcma bus.
-
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -8,8 +8,10 @@
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
--#include <linux/gpio/driver.h>
-+#include <linux/gpio.h>
-+#include <linux/irq.h>
- #include <linux/interrupt.h>
-+#include <linux/irqdomain.h>
- #include <linux/export.h>
- #include <linux/bcma/bcma.h>
-
-@@ -77,11 +79,19 @@ static void bcma_gpio_free(struct gpio_c
- }
-
- #if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
-+static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
-+
-+ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
-+ return irq_find_mapping(cc->irq_domain, gpio);
-+ else
-+ return -EINVAL;
-+}
-
- static void bcma_gpio_irq_unmask(struct irq_data *d)
- {
-- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-- struct bcma_drv_cc *cc = bcma_gpio_get_cc(gc);
-+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
- int gpio = irqd_to_hwirq(d);
- u32 val = bcma_chipco_gpio_in(cc, BIT(gpio));
-
-@@ -91,8 +101,7 @@ static void bcma_gpio_irq_unmask(struct
-
- static void bcma_gpio_irq_mask(struct irq_data *d)
- {
-- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-- struct bcma_drv_cc *cc = bcma_gpio_get_cc(gc);
-+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
- int gpio = irqd_to_hwirq(d);
-
- bcma_chipco_gpio_intmask(cc, BIT(gpio), 0);
-@@ -107,7 +116,6 @@ static struct irq_chip bcma_gpio_irq_chi
- static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id)
- {
- struct bcma_drv_cc *cc = dev_id;
-- struct gpio_chip *gc = &cc->gpio;
- u32 val = bcma_cc_read32(cc, BCMA_CC_GPIOIN);
- u32 mask = bcma_cc_read32(cc, BCMA_CC_GPIOIRQ);
- u32 pol = bcma_cc_read32(cc, BCMA_CC_GPIOPOL);
-@@ -117,58 +125,81 @@ static irqreturn_t bcma_gpio_irq_handler
- if (!irqs)
- return IRQ_NONE;
-
-- for_each_set_bit(gpio, &irqs, gc->ngpio)
-- generic_handle_irq(irq_find_mapping(gc->irqdomain, gpio));
-+ for_each_set_bit(gpio, &irqs, cc->gpio.ngpio)
-+ generic_handle_irq(bcma_gpio_to_irq(&cc->gpio, gpio));
- bcma_chipco_gpio_polarity(cc, irqs, val & irqs);
-
- return IRQ_HANDLED;
- }
-
--static int bcma_gpio_irq_init(struct bcma_drv_cc *cc)
-+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
- {
- struct gpio_chip *chip = &cc->gpio;
-- int hwirq, err;
-+ int gpio, hwirq, err;
-
- if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
- return 0;
-
-+ cc->irq_domain = irq_domain_add_linear(NULL, chip->ngpio,
-+ &irq_domain_simple_ops, cc);
-+ if (!cc->irq_domain) {
-+ err = -ENODEV;
-+ goto err_irq_domain;
-+ }
-+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
-+ int irq = irq_create_mapping(cc->irq_domain, gpio);
-+
-+ irq_set_chip_data(irq, cc);
-+ irq_set_chip_and_handler(irq, &bcma_gpio_irq_chip,
-+ handle_simple_irq);
-+ }
-+
- hwirq = bcma_core_irq(cc->core, 0);
- err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
- cc);
- if (err)
-- return err;
-+ goto err_req_irq;
-
- bcma_chipco_gpio_intmask(cc, ~0, 0);
- bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO);
-
-- err = gpiochip_irqchip_add(chip,
-- &bcma_gpio_irq_chip,
-- 0,
-- handle_simple_irq,
-- IRQ_TYPE_NONE);
-- if (err) {
-- free_irq(hwirq, cc);
-- return err;
-- }
--
- return 0;
-+
-+err_req_irq:
-+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
-+ int irq = irq_find_mapping(cc->irq_domain, gpio);
-+
-+ irq_dispose_mapping(irq);
-+ }
-+ irq_domain_remove(cc->irq_domain);
-+err_irq_domain:
-+ return err;
- }
-
--static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc)
-+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
- {
-+ struct gpio_chip *chip = &cc->gpio;
-+ int gpio;
-+
- if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
- return;
-
- bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
- free_irq(bcma_core_irq(cc->core, 0), cc);
-+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
-+ int irq = irq_find_mapping(cc->irq_domain, gpio);
-+
-+ irq_dispose_mapping(irq);
-+ }
-+ irq_domain_remove(cc->irq_domain);
- }
- #else
--static int bcma_gpio_irq_init(struct bcma_drv_cc *cc)
-+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
- {
- return 0;
- }
-
--static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc)
-+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
- {
- }
- #endif
-@@ -187,8 +218,9 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- chip->set = bcma_gpio_set_value;
- chip->direction_input = bcma_gpio_direction_input;
- chip->direction_output = bcma_gpio_direction_output;
-- chip->owner = THIS_MODULE;
-- chip->dev = bcma_bus_get_host_dev(bus);
-+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
-+ chip->to_irq = bcma_gpio_to_irq;
-+#endif
- #if IS_BUILTIN(CONFIG_OF)
- chip->of_node = cc->core->dev.of_node;
- #endif
-@@ -216,13 +248,13 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- else
- chip->base = -1;
-
-- err = gpiochip_add(chip);
-+ err = bcma_gpio_irq_domain_init(cc);
- if (err)
- return err;
-
-- err = bcma_gpio_irq_init(cc);
-+ err = gpiochip_add(chip);
- if (err) {
-- gpiochip_remove(chip);
-+ bcma_gpio_irq_domain_exit(cc);
- return err;
- }
-
-@@ -231,7 +263,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
-
- int bcma_gpio_unregister(struct bcma_drv_cc *cc)
- {
-- bcma_gpio_irq_exit(cc);
-+ bcma_gpio_irq_domain_exit(cc);
- gpiochip_remove(&cc->gpio);
- return 0;
- }
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -646,6 +646,7 @@ struct bcma_drv_cc {
- spinlock_t gpio_lock;
- #ifdef CONFIG_BCMA_DRIVER_GPIO
- struct gpio_chip gpio;
-+ struct irq_domain *irq_domain;
- #endif
- };
-
+++ /dev/null
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -919,6 +919,8 @@ static unsigned int yenta_probe_irq(stru
- * Probe for usable interrupts using the force
- * register to generate bogus card status events.
- */
-+#ifndef CONFIG_BCM47XX
-+ /* WRT54G3G does not like this */
- cb_writel(socket, CB_SOCKET_EVENT, -1);
- cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- reg = exca_readb(socket, I365_CSCINT);
-@@ -934,6 +936,7 @@ static unsigned int yenta_probe_irq(stru
- }
- cb_writel(socket, CB_SOCKET_MASK, 0);
- exca_writeb(socket, I365_CSCINT, reg);
-+#endif
-
- mask = probe_irq_mask(val) & 0xffff;
-
-@@ -1018,6 +1021,10 @@ static void yenta_get_socket_capabilitie
- else
- socket->socket.irq_mask = 0;
-
-+ /* irq mask probing is broken for the WRT54G3G */
-+ if (socket->socket.irq_mask == 0)
-+ socket->socket.irq_mask = 0x6f8;
-+
- dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
- }
-@@ -1250,6 +1257,15 @@ static int yenta_probe(struct pci_dev *d
- dev_info(&dev->dev, "Socket status: %08x\n",
- cb_readl(socket, CB_SOCKET_STATE));
-
-+ /* Generate an interrupt on card insert/remove */
-+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+ /* Set up Multifunction Routing Status Register */
-+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+ /* Switch interrupts to parallelized */
-+ config_writeb(socket, 0x92, 0x64);
-+
- yenta_fixup_parent_bridge(dev->subordinate);
-
- /* Register it with the pcmcia layer.. */
+++ /dev/null
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -389,7 +389,7 @@ static void ssb_pcicore_init_hostmode(st
- set_io_port_base(ssb_pcicore_controller.io_map_base);
- /* Give some time to the PCI controller to configure itself with the new
- * values. Not waiting at this point causes crashes of the machine. */
-- mdelay(10);
-+ mdelay(300);
- register_pci_controller(&ssb_pcicore_controller);
- }
-
+++ /dev/null
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -34,7 +34,8 @@ struct nvram_header {
- u32 config_ncdl; /* ncdl values for memc */
- };
-
--static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
- static int cfe_env;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -59,6 +59,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
-
projects / openwrt / staging / zorun.git / commitdiff