Add sound support for link, using the HDA codec implementation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
imply USB_EHCI_HCD
imply USB_XHCI_HCD
imply VIDEO_VESA
+ imply SOUND_IVYBRIDGE
if NORTHBRIDGE_INTEL_IVYBRIDGE
dm_pci_write_config8(dev, PAM6, 0x33);
}
+/**
+ * sandybridge_init_iommu() - Set up IOMMU so that azalia can be used
+ *
+ * It is not obvious where these values come from. They may be undocumented.
+ */
+static void sandybridge_init_iommu(struct udevice *dev)
+{
+ u32 capid0_a;
+
+ dm_pci_read_config32(dev, 0xe4, &capid0_a);
+ if (capid0_a & (1 << 23)) {
+ log_debug("capid0_a not needed\n");
+ return;
+ }
+
+ /* setup BARs */
+ writel(IOMMU_BASE1 >> 32, MCHBAR_REG(0x5404));
+ writel(IOMMU_BASE1 | 1, MCHBAR_REG(0x5400));
+ writel(IOMMU_BASE2 >> 32, MCHBAR_REG(0x5414));
+ writel(IOMMU_BASE2 | 1, MCHBAR_REG(0x5410));
+
+ /* lock policies */
+ writel(0x80000000, IOMMU_BASE1 + 0xff0);
+
+ /* Enable azalia sound */
+ writel(0x20000000, IOMMU_BASE2 + 0xff0);
+ writel(0xa0000000, IOMMU_BASE2 + 0xff0);
+}
+
static int bd82x6x_northbridge_early_init(struct udevice *dev)
{
const int chipset_type = SANDYBRIDGE_MOBILE;
sandybridge_setup_northbridge_bars(dev);
+ /* Setup IOMMU BARs */
+ sandybridge_init_iommu(dev);
+
/* Device Enable */
dm_pci_write_config32(dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
/dts-v1/;
#include <dt-bindings/gpio/x86-gpio.h>
+#include <dt-bindings/sound/azalia.h>
+#include <pci_ids.h>
/include/ "skeleton.dtsi"
/include/ "keyboard.dtsi"
compatible = "ehci-pci";
};
+ hda@1b,0 {
+ reg = <0x0000d800 0 0 0 0>;
+ compatible = "intel,bd82x6x-hda";
+
+ /* These correspond to the Intel HDA specification */
+ beep-verbs = <
+ 0x00170500 /* power up codec */
+ 0x00270500 /* power up DAC */
+ 0x00b70500 /* power up speaker */
+ 0x00b70740 /* enable speaker out */
+ 0x00b78d00 /* enable EAPD pin */
+ 0x00b70c02 /* set EAPD pin */
+ 0x0143b013>; /* beep volume */
+
+ codecs {
+ creative_codec: creative-ca0132 {
+ vendor-id = <PCI_VENDOR_ID_CREATIVE>;
+ device-id = <PCI_DEVICE_ID_CREATIVE_CA01322>;
+ };
+ intel_hdmi: hdmi {
+ vendor-id = <PCI_VENDOR_ID_INTEL>;
+ device-id = <PCI_DEVICE_ID_INTEL_COUGARPOINT_HDMI>;
+ };
+ };
+ };
+
usb_0: usb@1d,0 {
reg = <0x0000e800 0 0 0 0>;
compatible = "ehci-pci";
};
};
+
+&creative_codec {
+ verbs = <
+ /**
+ * Malcolm Setup. These correspond to the Intel HDA
+ * specification.
+ */
+ 0x01570d09 0x01570c23 0x01570a01 0x01570df0
+ 0x01570efe 0x01570775 0x015707d3 0x01570709
+ 0x01570753 0x015707d4 0x015707ef 0x01570775
+ 0x015707d3 0x01570709 0x01570702 0x01570737
+ 0x01570778 0x01553cce 0x015575c9 0x01553dce
+ 0x0155b7c9 0x01570de8 0x01570efe 0x01570702
+ 0x01570768 0x01570762 0x01553ace 0x015546c9
+ 0x01553bce 0x0155e8c9 0x01570d49 0x01570c88
+ 0x01570d20 0x01570e19 0x01570700 0x01571a05
+ 0x01571b29 0x01571a04 0x01571b29 0x01570a01
+
+ /* Pin Widget Verb Table */
+
+ /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x144dc0c2 */
+ AZALIA_SUBVENDOR(0x0, 0x144dc0c2)
+
+ /*
+ * Pin Complex (NID 0x0B) Port-G Analog Unknown
+ * Speaker at Int N/A
+ */
+ AZALIA_PIN_CFG(0x0, 0x0b, 0x901700f0)
+
+ /* Pin Complex (NID 0x0C) N/C */
+ AZALIA_PIN_CFG(0x0, 0x0c, 0x70f000f0)
+
+ /* Pin Complex (NID 0x0D) N/C */
+ AZALIA_PIN_CFG(0x0, 0x0d, 0x70f000f0)
+
+ /* Pin Complex (NID 0x0E) N/C */
+ AZALIA_PIN_CFG(0x0, 0x0e, 0x70f000f0)
+
+ /* Pin Complex (NID 0x0F) N/C */
+ AZALIA_PIN_CFG(0x0, 0x0f, 0x70f000f0)
+
+ /* Pin Complex (NID 0x10) Port-D 1/8 Black HP Out at Ext Left */
+ AZALIA_PIN_CFG(0x0, 0x10, 0x032110f0)
+
+ /* Pin Complex (NID 0x11) Port-B Click Mic */
+ AZALIA_PIN_CFG(0x0, 0x11, 0x90a700f0)
+
+ /* Pin Complex (NID 0x12) Port-C Combo Jack Mic or D-Mic */
+ AZALIA_PIN_CFG(0x0, 0x12, 0x03a110f0)
+
+ /* Pin Complex (NID 0x13) What you hear */
+ AZALIA_PIN_CFG(0x0, 0x13, 0x90d600f0)>;
+};
+
+&intel_hdmi {
+ verbs = <
+ /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */
+ AZALIA_SUBVENDOR(0x3, 0x80860101)
+
+ /* Pin Complex (NID 0x05) Digital Out at Int HDMI */
+ AZALIA_PIN_CFG(0x3, 0x05, 0x18560010)
+
+ /* Pin Complex (NID 0x06) Digital Out at Int HDMI */
+ AZALIA_PIN_CFG(0x3, 0x06, 0x18560020)
+
+ /* Pin Complex (NID 0x07) Digital Out at Int HDMI */
+ AZALIA_PIN_CFG(0x3, 0x07, 0x18560030)>;
+};
/* 4 KB per PCIe device */
#define DEFAULT_PCIEXBAR CONFIG_PCIE_ECAM_BASE
+#define IOMMU_BASE1 0xfed90000ULL
+#define IOMMU_BASE2 0xfed91000ULL
+
/* Device 0:0.0 PCI configuration space (Host Bridge) */
#define EPBAR 0x40
#define MCHBAR 0x48
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
+CONFIG_CMD_SOUND=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_TPM=y
CONFIG_CMD_TPM_TEST=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_LPC=y
CONFIG_SYS_NS16550=y
+CONFIG_SOUND=y
CONFIG_SPI=y
CONFIG_TPM_TIS_LPC=y
CONFIG_USB_STORAGE=y
Azalia which was the development code-name. It requires setup
information in the device tree (see intel-hda.txt).
+config SOUND_IVYBRIDGE
+ bool "Intel Ivybridge sound support"
+ depends on SOUND
+ select SOUND_INTEL_HDA
+ help
+ Enable sound output on supported Intel Ivybridge-based boards. This
+ driver uses Intel's High-definition Audio (HDA) architecture,
+ sometimes called Azalia. The audio codec is detected using a
+ semi-automatic mechanism.
+
config SOUND_MAX98088
bool "Support Maxim max98088 audio codec"
depends on I2S
obj-$(CONFIG_SOUND_MAX98090) += max98090.o maxim_codec.o
obj-$(CONFIG_SOUND_MAX98095) += max98095.o maxim_codec.o
obj-$(CONFIG_SOUND_INTEL_HDA) += hda_codec.o
+obj-$(CONFIG_SOUND_IVYBRIDGE) += ivybridge_sound.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel HDA audio (Azalia) for ivybridge
+ *
+ * Originally from coreboot file bd82x6x/azalia.c
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors.
+ * Copyright 2018 Google LLC
+ */
+
+#define LOG_CATEGORY UCLASS_SOUND
+
+#include <common.h>
+#include <dm.h>
+#include <hda_codec.h>
+#include <pch.h>
+#include <sound.h>
+
+static int bd82x6x_azalia_probe(struct udevice *dev)
+{
+ struct pci_child_platdata *plat;
+ struct hda_codec_priv *priv;
+ struct udevice *pch;
+ u32 codec_mask;
+ int conf;
+ int ret;
+
+ /* Only init after relocation */
+ if (!(gd->flags & GD_FLG_RELOC))
+ return 0;
+
+ ret = hda_codec_init(dev);
+ if (ret) {
+ log_debug("Cannot set up HDA codec (err=%d)\n", ret);
+ return ret;
+ }
+ priv = dev_get_priv(dev);
+
+ ret = uclass_first_device_err(UCLASS_PCH, &pch);
+ log_debug("PCH %p %s\n", pch, pch->name);
+ if (ret)
+ return ret;
+
+ conf = pch_ioctl(pch, PCH_REQ_HDA_CONFIG, NULL, 0);
+ log_debug("conf = %x\n", conf);
+ if (conf >= 0) {
+ dm_pci_clrset_config32(dev, 0x120, 7 << 24 | 0xfe,
+ 1 << 24 | /* 2 << 24 for server */
+ conf);
+
+ dm_pci_clrset_config16(dev, 0x78, 0, 1 << 1);
+ } else {
+ log_debug("V1CTL disabled\n");
+ }
+ dm_pci_clrset_config32(dev, 0x114, 0xfe, 0);
+
+ /* Set VCi enable bit */
+ dm_pci_clrset_config32(dev, 0x120, 0, 1U << 31);
+
+ /* Enable HDMI codec */
+ dm_pci_clrset_config32(dev, 0xc4, 0, 1 << 1);
+ dm_pci_clrset_config8(dev, 0x43, 0, 1 << 6);
+
+ /* Additional programming steps */
+ dm_pci_clrset_config32(dev, 0xc4, 0, 1 << 13);
+ dm_pci_clrset_config32(dev, 0xc4, 0, 1 << 10);
+ dm_pci_clrset_config32(dev, 0xd0, 1U << 31, 0);
+
+ /* Additional step on Panther Point */
+ plat = dev_get_parent_platdata(dev);
+ if (plat->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_HDA)
+ dm_pci_clrset_config32(dev, 0xc4, 0, 1 << 17);
+
+ dm_pci_write_config8(dev, 0x3c, 0xa); /* unused? */
+
+ /* Audio Control: Select Azalia mode */
+ dm_pci_clrset_config8(dev, 0x40, 0, 1);
+ dm_pci_clrset_config8(dev, 0x4d, 1 << 7, 0); /* Docking not supported */
+ codec_mask = hda_codec_detect(priv->regs);
+ log_debug("codec_mask = %02x\n", codec_mask);
+
+ if (codec_mask) {
+ ret = hda_codecs_init(dev, priv->regs, codec_mask);
+ if (ret) {
+ log_err("Codec init failed (err=%d)\n", ret);
+ return ret;
+ }
+ }
+
+ /* Enable dynamic clock gating */
+ dm_pci_clrset_config8(dev, 0x43, 7, BIT(2) | BIT(0));
+
+ ret = hda_codec_finish_init(dev);
+ if (ret) {
+ log_debug("Cannot set up HDA codec (err=%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bd82x6x_azalia_setup(struct udevice *dev)
+{
+ return 0;
+}
+
+int bd82x6x_azalia_start_beep(struct udevice *dev, int frequency_hz)
+{
+ return hda_codec_start_beep(dev, frequency_hz);
+}
+
+int bd82x6x_azalia_stop_beep(struct udevice *dev)
+{
+ return hda_codec_stop_beep(dev);
+}
+
+static const struct sound_ops bd82x6x_azalia_ops = {
+ .setup = bd82x6x_azalia_setup,
+ .start_beep = bd82x6x_azalia_start_beep,
+ .stop_beep = bd82x6x_azalia_stop_beep,
+};
+
+static const struct udevice_id bd82x6x_azalia_ids[] = {
+ { .compatible = "intel,hd-audio" },
+ { }
+};
+
+U_BOOT_DRIVER(bd82x6x_azalia_drv) = {
+ .name = "bd82x6x-hda",
+ .id = UCLASS_SOUND,
+ .of_match = bd82x6x_azalia_ids,
+ .probe = bd82x6x_azalia_probe,
+ .ops = &bd82x6x_azalia_ops,
+ .priv_auto_alloc_size = sizeof(struct hda_codec_priv),
+};
projects / project / bcm63xx / u-boot.git / commitdiff