CROSS_COMPILE="$(TARGET_CROSS)" \
SUBDIRS="$(PKG_BUILD_DIR)" \
EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
- LINUXINCLUDE="-I$(LINUX_DIR)/include -include linux/autoconf.h" \
+ LINUXINCLUDE="-I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include -include linux/autoconf.h" \
$(EXTRA_KCONFIG)
define Build/Prepare
--- /dev/null
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_AR2313=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATHEROS=y
+CONFIG_ATHEROS_AR5312=y
+CONFIG_ATHEROS_AR5315=y
+CONFIG_ATHEROS_AR5315_PCI=y
+CONFIG_ATHEROS_WDT=y
+# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BITREVERSE=y
+# CONFIG_BT is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CLASSIC_RCU=y
+CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit"
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CSRC_R4K=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_FREEZER is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GPIO_DEVICE=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HERMES is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+# CONFIG_I2C is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+CONFIG_ICPLUS_PHY=y
+# CONFIG_IDE is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IRQ_CPU=y
+# CONFIG_ISDN is not set
+CONFIG_KMOD=y
+# CONFIG_LEDS_ALIX is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_START=0x0
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_SPIFLASH=y
+# CONFIG_NET_PCI is not set
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_DEFRAG_IPV4=m
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_PHYLIB=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
+CONFIG_RFKILL_LEDS=y
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+CONFIG_SND_MIPS=y
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_WDM=m
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+config ATHEROS_AR5312
+ bool "Atheros 5312/2312+ support"
+ depends on ATHEROS
+ default y
+
+config ATHEROS_AR5315
+ bool "Atheros 5315/2315+ support"
+ depends on ATHEROS
+ select DMA_NONCOHERENT
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select GENERIC_GPIO
+ default y
+
+config ATHEROS_AR5315_PCI
+ bool "PCI support"
+ select HW_HAS_PCI
+ select PCI
+ select USB_ARCH_HAS_HCD
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
+ depends on ATHEROS_AR5315
+ default n
--- /dev/null
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2006 FON Technology, SL.
+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y += board.o prom.o reset.o
+obj-$(CONFIG_ATHEROS_AR5312) += ar5312/
+obj-$(CONFIG_ATHEROS_AR5315) += ar5315/
--- /dev/null
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2007 FON Technology, SL.
+# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y := board.o irq.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <ar531x.h>
+#include <linux/leds.h>
+
+#define NO_PHY 0x1f
+
+static int is_5312 = 0;
+static struct platform_device *ar5312_devs[6];
+
+static struct resource ar5312_eth0_res[] = {
+ {
+ .name = "eth0_membase",
+ .flags = IORESOURCE_MEM,
+ .start = KSEG1ADDR(AR531X_ENET0),
+ .end = KSEG1ADDR(AR531X_ENET0 + 0x2000),
+ },
+ {
+ .name = "eth0_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = AR5312_IRQ_ENET0_INTRS,
+ .end = AR5312_IRQ_ENET0_INTRS,
+ },
+};
+static struct ar531x_eth ar5312_eth0_data = {
+ .phy = NO_PHY,
+ .mac = 0,
+ .reset_base = AR531X_RESET,
+ .reset_mac = AR531X_RESET_ENET0,
+ .reset_phy = AR531X_RESET_EPHY0,
+ .phy_base = KSEG1ADDR(AR531X_ENET0),
+};
+
+static struct resource ar5312_eth1_res[] = {
+ {
+ .name = "eth1_membase",
+ .flags = IORESOURCE_MEM,
+ .start = KSEG1ADDR(AR531X_ENET1),
+ .end = KSEG1ADDR(AR531X_ENET1 + 0x2000),
+ },
+ {
+ .name = "eth1_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = AR5312_IRQ_ENET1_INTRS,
+ .end = AR5312_IRQ_ENET1_INTRS,
+ },
+};
+static struct ar531x_eth ar5312_eth1_data = {
+ .phy = NO_PHY,
+ .mac = 1,
+ .reset_base = AR531X_RESET,
+ .reset_mac = AR531X_RESET_ENET1,
+ .reset_phy = AR531X_RESET_EPHY1,
+ .phy_base = KSEG1ADDR(AR531X_ENET1),
+};
+
+static struct platform_device ar5312_eth[] = {
+ {
+ .id = 0,
+ .name = "ar531x-eth",
+ .dev.platform_data = &ar5312_eth0_data,
+ .resource = ar5312_eth0_res,
+ .num_resources = ARRAY_SIZE(ar5312_eth0_res)
+ },
+ {
+ .id = 1,
+ .name = "ar531x-eth",
+ .dev.platform_data = &ar5312_eth1_data,
+ .resource = ar5312_eth1_res,
+ .num_resources = ARRAY_SIZE(ar5312_eth1_res)
+ },
+};
+
+
+/*
+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
+ * of ENET1. Atheros calls it 'twisted' for a reason :)
+ */
+static struct resource ar231x_eth0_res[] = {
+ {
+ .name = "eth0_membase",
+ .flags = IORESOURCE_MEM,
+ .start = KSEG1ADDR(AR531X_ENET1),
+ .end = KSEG1ADDR(AR531X_ENET1 + 0x2000),
+ },
+ {
+ .name = "eth0_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = AR5312_IRQ_ENET1_INTRS,
+ .end = AR5312_IRQ_ENET1_INTRS,
+ },
+};
+static struct ar531x_eth ar231x_eth0_data = {
+ .phy = 1,
+ .mac = 1,
+ .reset_base = AR531X_RESET,
+ .reset_mac = AR531X_RESET_ENET1,
+ .reset_phy = AR531X_RESET_EPHY1,
+ .phy_base = KSEG1ADDR(AR531X_ENET0),
+};
+static struct platform_device ar231x_eth0 = {
+ .id = 0,
+ .name = "ar531x-eth",
+ .dev.platform_data = &ar231x_eth0_data,
+ .resource = ar231x_eth0_res,
+ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
+};
+
+
+static struct platform_device ar5312_wmac[] = {
+ {
+ .id = 0,
+ .name = "ar531x-wmac",
+ },
+ {
+ .id = 1,
+ .name = "ar531x-wmac",
+ },
+};
+
+static struct physmap_flash_data ar5312_flash_data = {
+ .width = 2,
+};
+
+static struct resource ar5312_flash_resource = {
+ .start = AR531X_FLASH,
+ .end = AR531X_FLASH + 0x800000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ar5312_physmap_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ar5312_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ar5312_flash_resource,
+};
+
+#ifdef CONFIG_LEDS_GPIO
+static struct gpio_led ar5312_leds[] = {
+ { .name = "wlan", .gpio = 0, .active_low = 1, },
+};
+
+static const struct gpio_led_platform_data ar5312_led_data = {
+ .num_leds = ARRAY_SIZE(ar5312_leds),
+ .leds = (void *) ar5312_leds,
+};
+
+static struct platform_device ar5312_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *) &ar5312_led_data,
+ }
+};
+#endif
+
+/*
+ * NB: This mapping size is larger than the actual flash size,
+ * but this shouldn't be a problem here, because the flash
+ * will simply be mapped multiple times.
+ */
+static char __init *ar5312_flash_limit(void)
+{
+ u32 ctl;
+ /*
+ * Configure flash bank 0.
+ * Assume 8M window size. Flash will be aliased if it's smaller
+ */
+ ctl = FLASHCTL_E |
+ FLASHCTL_AC_8M |
+ FLASHCTL_RBLE |
+ (0x01 << FLASHCTL_IDCY_S) |
+ (0x07 << FLASHCTL_WST1_S) |
+ (0x07 << FLASHCTL_WST2_S) |
+ (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW);
+
+ sysRegWrite(AR531X_FLASHCTL0, ctl);
+
+ /* Disable other flash banks */
+ sysRegWrite(AR531X_FLASHCTL1,
+ sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+ sysRegWrite(AR531X_FLASHCTL2,
+ sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
+}
+
+static struct ar531x_config __init *init_wmac(int unit)
+{
+ struct ar531x_config *config;
+
+ config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
+ config->board = board_config;
+ config->radio = radio_config;
+ config->unit = unit;
+ config->tag = (u_int16_t) ((sysRegRead(AR531X_REV) >> AR531X_REV_WMAC_MIN_S) & AR531X_REV_CHIP);
+
+ return config;
+}
+
+int __init ar5312_init_devices(void)
+{
+ struct ar531x_boarddata *bcfg;
+ char *radio, *c;
+ int dev = 0;
+ uint32_t fctl = 0;
+
+ if (!is_5312)
+ return 0;
+
+ /* Locate board/radio config data */
+ ar531x_find_config(ar5312_flash_limit());
+ bcfg = (struct ar531x_boarddata *) board_config;
+
+
+ /*
+ * Chip IDs and hardware detection for some Atheros
+ * models are really broken!
+ *
+ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
+ * as indication for AR2312, which is otherwise
+ * indistinguishable from the real AR5312.
+ */
+ if (radio_config) {
+ radio = radio_config + AR531X_RADIO_MASK_OFF;
+ if ((*((u32 *) radio) & AR531X_RADIO0_MASK) == 0)
+ bcfg->config |= BD_ISCASPER;
+ } else
+ radio = NULL;
+
+ /* AR2313 has CPU minor rev. 10 */
+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
+ mips_machtype = MACH_ATHEROS_AR2313;
+
+ /* AR2312 shares the same Silicon ID as AR5312 */
+ else if (bcfg->config & BD_ISCASPER)
+ mips_machtype = MACH_ATHEROS_AR2312;
+
+ /* Everything else is probably AR5312 or compatible */
+ else
+ mips_machtype = MACH_ATHEROS_AR5312;
+
+ ar5312_eth0_data.board_config = board_config;
+ ar5312_eth1_data.board_config = board_config;
+
+ /* fixup flash width */
+ fctl = sysRegRead(AR531X_FLASHCTL) & FLASHCTL_MW;
+ switch (fctl) {
+ case FLASHCTL_MWx16:
+ ar5312_flash_data.width = 2;
+ break;
+ case FLASHCTL_MWx8:
+ default:
+ ar5312_flash_data.width = 1;
+ break;
+ }
+
+ ar5312_devs[dev++] = &ar5312_physmap_flash;
+
+#ifdef CONFIG_LEDS_GPIO
+ ar5312_leds[0].gpio = bcfg->sysLedGpio;
+ ar5312_devs[dev++] = &ar5312_gpio_leds;
+#endif
+
+ if (!memcmp(bcfg->enet0Mac, "\xff\xff\xff\xff\xff\xff", 6))
+ memcpy(bcfg->enet0Mac, bcfg->enet1Mac, 6);
+
+ if (memcmp(bcfg->enet0Mac, bcfg->enet1Mac, 6) == 0) {
+ /* ENET0 and ENET1 have the same mac.
+ * Increment the one from ENET1 */
+ c = bcfg->enet1Mac + 5;
+ while ((c >= (char *) bcfg->enet1Mac) && !(++(*c)))
+ c--;
+ }
+
+ switch(mips_machtype) {
+ case MACH_ATHEROS_AR5312:
+ ar5312_eth0_data.macaddr = bcfg->enet0Mac;
+ ar5312_eth1_data.macaddr = bcfg->enet1Mac;
+ ar5312_devs[dev++] = &ar5312_eth[0];
+ ar5312_devs[dev++] = &ar5312_eth[1];
+ break;
+ case MACH_ATHEROS_AR2312:
+ case MACH_ATHEROS_AR2313:
+ ar231x_eth0_data.macaddr = bcfg->enet0Mac;
+ ar5312_devs[dev++] = &ar231x_eth0;
+ ar5312_flash_data.width = 1;
+ break;
+ }
+
+ if (radio) {
+ if (mips_machtype == MACH_ATHEROS_AR5312) {
+ if (*((u32 *) radio) & AR531X_RADIO0_MASK) {
+ ar5312_wmac[0].dev.platform_data = init_wmac(0);
+ ar5312_devs[dev++] = &ar5312_wmac[0];
+ }
+ }
+ if (*((u32 *) radio) & AR531X_RADIO1_MASK) {
+ ar5312_wmac[1].dev.platform_data = init_wmac(1);
+ ar5312_devs[dev++] = &ar5312_wmac[1];
+ }
+ }
+
+ return platform_add_devices(ar5312_devs, dev);
+}
+
+
+static void ar5312_halt(void)
+{
+ while (1);
+}
+
+static void ar5312_power_off(void)
+{
+ ar5312_halt();
+}
+
+
+static void ar5312_restart(char *command)
+{
+ /* reset the system */
+ for(;;) sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM);
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+ 1,
+ 2,
+ 4,
+ 5
+};
+
+
+static unsigned int __init ar5312_cpu_frequency(void)
+{
+ unsigned int result;
+ unsigned int predivide_mask, predivide_shift;
+ unsigned int multiplier_mask, multiplier_shift;
+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
+ unsigned int doubler_mask;
+ unsigned int wisoc_revision;
+
+ /* Trust the bootrom's idea of cpu frequency. */
+ if ((result = sysRegRead(AR5312_SCRATCH)))
+ return result;
+
+ wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S;
+ if (wisoc_revision == AR531X_REV_MAJ_AR2313) {
+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+ } else { /* AR5312 and AR2312 */
+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
+ }
+
+ /*
+ * Clocking is derived from a fixed 40MHz input clock.
+ *
+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
+ * flash, Timer, Watchdog Timer)
+ *
+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
+ *
+ * So, for example, with a PLL multiplier of 5, we have
+ *
+ * cpuFreq = 200MHz
+ * sysFreq = 50MHz
+ * cntFreq = 100MHz
+ *
+ * We compute the CPU frequency, based on PLL settings.
+ */
+
+ clockCtl1 = sysRegRead(AR5312_CLOCKCTL1);
+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
+
+ if (clockCtl1 & doubler_mask) {
+ multiplier = multiplier << 1;
+ }
+ return (40000000 / preDivisor) * multiplier;
+}
+
+static inline int ar5312_sys_frequency(void)
+{
+ return ar5312_cpu_frequency() / 4;
+}
+
+static void __init ar5312_time_init(void)
+{
+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
+}
+
+
+void __init ar5312_prom_init(void)
+{
+ u32 memsize, memcfg, bank0AC, bank1AC;
+
+ is_5312 = 1;
+
+ /* Detect memory size */
+ memcfg = sysRegRead(AR531X_MEM_CFG1);
+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
+ memsize <<= 20;
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+
+ /* Initialize it to AR5312 for now. Real detection will be done
+ * in ar5312_init_devices() */
+ mips_machtype = MACH_ATHEROS_AR5312;
+}
+
+void __init ar5312_plat_setup(void)
+{
+ /* Clear any lingering AHB errors */
+ sysRegRead(AR531X_PROCADDR);
+ sysRegRead(AR531X_DMAADDR);
+ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
+
+ board_time_init = ar5312_time_init;
+
+ _machine_restart = ar5312_restart;
+ _machine_halt = ar5312_halt;
+ pm_power_off = ar5312_power_off;
+
+ serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
+}
+
+arch_initcall(ar5312_init_devices);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <ar531x.h>
+#include <gpio.h>
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+asmlinkage void ar5312_irq_dispatch(void)
+{
+ int pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP2)
+ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
+ else if (pending & CAUSEF_IP3)
+ do_IRQ(AR5312_IRQ_ENET0_INTRS);
+ else if (pending & CAUSEF_IP4)
+ do_IRQ(AR5312_IRQ_ENET1_INTRS);
+ else if (pending & CAUSEF_IP5)
+ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
+ else if (pending & CAUSEF_IP6) {
+ unsigned int ar531x_misc_intrs = sysRegRead(AR531X_ISR) & sysRegRead(AR531X_IMR);
+
+ if (ar531x_misc_intrs & AR531X_ISR_TIMER) {
+ do_IRQ(AR531X_MISC_IRQ_TIMER);
+ (void)sysRegRead(AR531X_TIMER);
+ } else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC)
+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+ else if ((ar531x_misc_intrs & AR531X_ISR_UART0))
+ do_IRQ(AR531X_MISC_IRQ_UART0);
+ else if (ar531x_misc_intrs & AR531X_ISR_WD)
+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+ else
+ do_IRQ(AR531X_MISC_IRQ_NONE);
+ } else if (pending & CAUSEF_IP7) {
+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
+ }
+}
+
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_enable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR531X_IMR);
+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+ sysRegWrite(AR531X_IMR, imr);
+ sysRegRead(AR531X_IMR); /* flush write buffer */
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_disable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR531X_IMR);
+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+ sysRegWrite(AR531X_IMR, imr);
+ sysRegRead(AR531X_IMR); /* flush write buffer */
+}
+
+/* Turn on the specified AR531X_MISC_IRQ interrupt */
+static unsigned int
+ar5312_misc_intr_startup(unsigned int irq)
+{
+ ar5312_misc_intr_enable(irq);
+ return 0;
+}
+
+/* Turn off the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_shutdown(unsigned int irq)
+{
+ ar5312_misc_intr_disable(irq);
+}
+
+static void
+ar5312_misc_intr_ack(unsigned int irq)
+{
+ ar5312_misc_intr_disable(irq);
+}
+
+static void
+ar5312_misc_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar5312_misc_intr_enable(irq);
+}
+
+static struct irq_chip ar5312_misc_intr_controller = {
+ .typename = "AR5312 misc",
+ .startup = ar5312_misc_intr_startup,
+ .shutdown = ar5312_misc_intr_shutdown,
+ .enable = ar5312_misc_intr_enable,
+ .disable = ar5312_misc_intr_disable,
+ .ack = ar5312_misc_intr_ack,
+ .end = ar5312_misc_intr_end,
+};
+
+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
+{
+ u32 proc1 = sysRegRead(AR531X_PROC1);
+ u32 procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */
+ u32 dma1 = sysRegRead(AR531X_DMA1);
+ u32 dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */
+
+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
+ procAddr, proc1, dmaAddr, dma1);
+
+ machine_restart("AHB error"); /* Catastrophic failure */
+ return IRQ_HANDLED;
+}
+
+
+static struct irqaction ar5312_ahb_proc_interrupt = {
+ .handler = ar5312_ahb_proc_handler,
+ .flags = IRQF_DISABLED,
+ .name = "ar5312_ahb_proc_interrupt",
+};
+
+
+static struct irqaction cascade = {
+ .handler = no_action,
+ .flags = IRQF_DISABLED,
+ .name = "cascade",
+};
+
+void __init ar5312_misc_intr_init(int irq_base)
+{
+ int i;
+
+ for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].chip = &ar5312_misc_intr_controller;
+ }
+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
+ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
+}
+
+
--- /dev/null
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2007 FON Technology, SL.
+# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y := board.o irq.o
+obj-$(CONFIG_ATHEROS_AR5315_PCI) += pci.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <ar531x.h>
+#include <linux/leds.h>
+#include <asm/gpio.h>
+
+static int is_5315 = 0;
+
+static struct resource ar5315_eth_res[] = {
+ {
+ .name = "eth0_membase",
+ .flags = IORESOURCE_MEM,
+ .start = AR5315_ENET0,
+ .end = AR5315_ENET0 + 0x2000,
+ },
+ {
+ .name = "eth0_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = AR5315_IRQ_ENET0_INTRS,
+ .end = AR5315_IRQ_ENET0_INTRS,
+ },
+};
+
+static struct ar531x_eth ar5315_eth_data = {
+ .phy = 1,
+ .mac = 0,
+ .reset_base = AR5315_RESET,
+ .reset_mac = AR5315_RESET_ENET0,
+ .reset_phy = AR5315_RESET_EPHY0,
+ .phy_base = AR5315_ENET0
+};
+
+static struct platform_device ar5315_eth = {
+ .id = 0,
+ .name = "ar531x-eth",
+ .dev.platform_data = &ar5315_eth_data,
+ .resource = ar5315_eth_res,
+ .num_resources = ARRAY_SIZE(ar5315_eth_res)
+};
+
+static struct platform_device ar5315_wmac = {
+ .id = 0,
+ .name = "ar531x-wmac",
+ /* FIXME: add resources */
+};
+
+static struct resource ar5315_spiflash_res[] = {
+ {
+ .name = "flash_base",
+ .flags = IORESOURCE_MEM,
+ .start = KSEG1ADDR(AR5315_SPI_READ),
+ .end = KSEG1ADDR(AR5315_SPI_READ) + 0x800000,
+ },
+ {
+ .name = "flash_regs",
+ .flags = IORESOURCE_MEM,
+ .start = 0x11300000,
+ .end = 0x11300012,
+ },
+};
+
+static struct platform_device ar5315_spiflash = {
+ .id = 0,
+ .name = "spiflash",
+ .resource = ar5315_spiflash_res,
+ .num_resources = ARRAY_SIZE(ar5315_spiflash_res)
+};
+
+#ifdef CONFIG_LEDS_GPIO
+static struct gpio_led ar5315_leds[8];
+
+static struct gpio_led_platform_data ar5315_led_data = {
+ .num_leds = ARRAY_SIZE(ar5315_leds),
+ .leds = (void *) ar5315_leds,
+};
+
+static struct platform_device ar5315_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *) &ar5315_led_data,
+ }
+};
+#endif
+
+static struct platform_device ar5315_wdt =
+{
+ .id = 0,
+ .name = "ar2315_wdt",
+};
+
+static __initdata struct platform_device *ar5315_devs[6];
+
+static void *flash_regs;
+
+static inline __u32 spiflash_regread32(int reg)
+{
+ volatile __u32 *data = (__u32 *)(flash_regs + reg);
+
+ return (*data);
+}
+
+static inline void spiflash_regwrite32(int reg, __u32 data)
+{
+ volatile __u32 *addr = (__u32 *)(flash_regs + reg);
+
+ *addr = data;
+}
+
+#define SPI_FLASH_CTL 0x00
+#define SPI_FLASH_OPCODE 0x04
+#define SPI_FLASH_DATA 0x08
+
+static __u8 spiflash_probe(void)
+{
+ __u32 reg;
+
+ do {
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ } while (reg & SPI_CTL_BUSY);
+
+ spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab);
+
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 |
+ (1 << 4) | SPI_CTL_START;
+
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+ do {
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ } while (reg & SPI_CTL_BUSY);
+
+ reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
+ reg &= 0xff;
+
+ return (u8) reg;
+}
+
+
+#define STM_8MBIT_SIGNATURE 0x13
+#define STM_16MBIT_SIGNATURE 0x14
+#define STM_32MBIT_SIGNATURE 0x15
+#define STM_64MBIT_SIGNATURE 0x16
+#define STM_128MBIT_SIGNATURE 0x17
+
+
+static char __init *ar5315_flash_limit(void)
+{
+ u8 sig;
+ u32 flash_size = 0;
+
+ /* probe the flash chip size */
+ flash_regs = ioremap_nocache(ar5315_spiflash_res[1].start, ar5315_spiflash_res[1].end - ar5315_spiflash_res[1].start);
+ sig = spiflash_probe();
+ iounmap(flash_regs);
+
+ switch(sig) {
+ case STM_8MBIT_SIGNATURE:
+ flash_size = 0x00100000;
+ break;
+ case STM_16MBIT_SIGNATURE:
+ flash_size = 0x00200000;
+ break;
+ case STM_32MBIT_SIGNATURE:
+ flash_size = 0x00400000;
+ break;
+ case STM_64MBIT_SIGNATURE:
+ flash_size = 0x00800000;
+ break;
+ case STM_128MBIT_SIGNATURE:
+ flash_size = 0x01000000;
+ break;
+ }
+
+ ar5315_spiflash_res[0].end = ar5315_spiflash_res[0].start + flash_size;
+ return (char *) ar5315_spiflash_res[0].end;
+}
+
+int __init ar5315_init_devices(void)
+{
+ struct ar531x_config *config;
+ struct ar531x_boarddata *bcfg;
+ int dev = 0;
+#ifdef CONFIG_LEDS_GPIO
+ int i;
+ char *tmp;
+#endif
+
+ if (!is_5315)
+ return 0;
+
+ /* Find board configuration */
+ ar531x_find_config(ar5315_flash_limit());
+ bcfg = (struct ar531x_boarddata *) board_config;
+
+ config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
+ config->board = board_config;
+ config->radio = radio_config;
+ config->unit = 0;
+ config->tag = (u_int16_t) (sysRegRead(AR5315_SREV) & AR5315_REV_CHIP);
+
+ ar5315_eth_data.board_config = board_config;
+ ar5315_eth_data.macaddr = bcfg->enet0Mac;
+ ar5315_wmac.dev.platform_data = config;
+
+ ar5315_devs[dev++] = &ar5315_eth;
+ ar5315_devs[dev++] = &ar5315_wmac;
+ ar5315_devs[dev++] = &ar5315_spiflash;
+ ar5315_devs[dev++] = &ar5315_wdt;
+
+#ifdef CONFIG_LEDS_GPIO
+ ar5315_led_data.num_leds = 0;
+ for(i = 1; i < 8; i++)
+ {
+ if((i != AR5315_RESET_GPIO) && (i != bcfg->resetConfigGpio))
+ {
+ if(i == bcfg->sysLedGpio)
+ {
+ tmp = kstrdup("wlan", GFP_KERNEL);
+ } else {
+ tmp = kmalloc(6, GFP_KERNEL);
+ if(tmp)
+ sprintf((char*)tmp, "gpio%d", i);
+ }
+ if(tmp)
+ {
+ ar5315_leds[ar5315_led_data.num_leds].name = tmp;
+ ar5315_leds[ar5315_led_data.num_leds].gpio = i;
+ ar5315_leds[ar5315_led_data.num_leds].active_low = 0;
+ ar5315_led_data.num_leds++;
+ } else {
+ printk("failed to alloc led string\n");
+ continue;
+ }
+ }
+ }
+ ar5315_devs[dev++] = &ar5315_gpio_leds;
+#endif
+
+ return platform_add_devices(ar5315_devs, dev);
+}
+
+static void ar5315_halt(void)
+{
+ while (1);
+}
+
+static void ar5315_power_off(void)
+{
+ ar5315_halt();
+}
+
+
+static void ar5315_restart(char *command)
+{
+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
+
+ /* reset the system */
+ sysRegWrite(AR5315_COLD_RESET,AR5317_RESET_SYSTEM);
+
+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
+ * give it some time to attempt a gpio based hardware reset
+ * (atheros reference design workaround) */
+ gpio_direction_output(AR5315_RESET_GPIO, 0);
+ mdelay(100);
+
+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
+ * workaround. Attempt to jump to the mips reset location -
+ * the boot loader itself might be able to recover the system */
+ mips_reset_vec();
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+ 1,
+ 2,
+ 4,
+ 5
+};
+
+static int __initdata PLLC_DIVIDE_TABLE[5] = {
+ 2,
+ 3,
+ 4,
+ 6,
+ 3
+};
+
+static unsigned int __init
+ar5315_sys_clk(unsigned int clockCtl)
+{
+ unsigned int pllcCtrl,cpuDiv;
+ unsigned int pllcOut,refdiv,fdiv,divby2;
+ unsigned int clkDiv;
+
+ pllcCtrl = sysRegRead(AR5315_PLLC_CTL);
+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
+ divby2 += 1;
+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
+
+
+ /* clkm input selected */
+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
+ case 0:
+ case 1:
+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
+ break;
+ case 2:
+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
+ break;
+ default:
+ pllcOut = 40000000;
+ clkDiv = 1;
+ break;
+ }
+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
+ cpuDiv = cpuDiv * 2 ?: 1;
+ return (pllcOut/(clkDiv * cpuDiv));
+}
+
+static inline unsigned int ar5315_cpu_frequency(void)
+{
+ return ar5315_sys_clk(sysRegRead(AR5315_CPUCLK));
+}
+
+static inline unsigned int ar5315_apb_frequency(void)
+{
+ return ar5315_sys_clk(sysRegRead(AR5315_AMBACLK));
+}
+
+static void __init ar5315_time_init(void)
+{
+ mips_hpt_frequency = ar5315_cpu_frequency() / 2;
+}
+
+void __init ar5315_prom_init(void)
+{
+ u32 memsize, memcfg, devid;
+
+ is_5315 = 1;
+ memcfg = sysRegRead(AR5315_MEM_CFG);
+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
+ memsize <<= 3;
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+
+ /* Detect the hardware based on the device ID */
+ devid = sysRegRead(AR5315_SREV) & AR5315_REV_CHIP;
+ switch(devid) {
+ case 0x90:
+ case 0x91:
+ mips_machtype = MACH_ATHEROS_AR2317;
+ break;
+ default:
+ mips_machtype = MACH_ATHEROS_AR2315;
+ break;
+ }
+}
+
+void __init ar5315_plat_setup(void)
+{
+ unsigned int config = read_c0_config();
+
+ /* Clear any lingering AHB errors */
+ write_c0_config(config & ~0x3);
+ sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
+ sysRegRead(AR5315_AHB_ERR1);
+ sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION);
+
+ board_time_init = ar5315_time_init;
+
+ _machine_restart = ar5315_restart;
+ _machine_halt = ar5315_halt;
+ pm_power_off = ar5315_power_off;
+
+ serial_setup(KSEG1ADDR(AR5315_UART0), ar5315_apb_frequency());
+}
+
+arch_initcall(ar5315_init_devices);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/irq_cpu.h>
+#include <asm/io.h>
+
+#include <ar531x.h>
+#include <gpio.h>
+
+static u32 gpiointmask = 0, gpiointval = 0;
+
+static inline void ar5315_gpio_irq(void)
+{
+ u32 pend;
+ sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO);
+
+ /* only do one gpio interrupt at a time */
+ pend = (sysRegRead(AR5315_GPIO_DI) ^ gpiointval) & gpiointmask;
+ if (!pend)
+ return;
+
+ do_IRQ(AR531X_GPIO_IRQ_BASE + fls(pend) - 1);
+}
+
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+asmlinkage void ar5315_irq_dispatch(void)
+{
+ int pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP3)
+ do_IRQ(AR5315_IRQ_WLAN0_INTRS);
+ else if (pending & CAUSEF_IP4)
+ do_IRQ(AR5315_IRQ_ENET0_INTRS);
+#ifdef CONFIG_PCI
+ else if (pending & CAUSEF_IP5)
+ ar5315_pci_irq(AR5315_IRQ_LCBUS_PCI);
+#endif
+ else if (pending & CAUSEF_IP2) {
+ unsigned int ar531x_misc_intrs = sysRegRead(AR5315_ISR) & sysRegRead(AR5315_IMR);
+
+ if (ar531x_misc_intrs & AR5315_ISR_SPI)
+ do_IRQ(AR531X_MISC_IRQ_SPI);
+ else if (ar531x_misc_intrs & AR5315_ISR_TIMER)
+ do_IRQ(AR531X_MISC_IRQ_TIMER);
+ else if (ar531x_misc_intrs & AR5315_ISR_AHB)
+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+ else if (ar531x_misc_intrs & AR5315_ISR_GPIO)
+ ar5315_gpio_irq();
+ else if (ar531x_misc_intrs & AR5315_ISR_UART0)
+ do_IRQ(AR531X_MISC_IRQ_UART0);
+ else if (ar531x_misc_intrs & AR5315_ISR_WD)
+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+ else
+ do_IRQ(AR531X_MISC_IRQ_NONE);
+ } else if (pending & CAUSEF_IP7)
+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_abort_irq(void)
+{
+ sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_ABORT_INT);
+ (void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */
+}
+
+static inline void pci_ack_irq(void)
+{
+ sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_EXT_INT);
+ (void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */
+}
+
+void ar5315_pci_irq(int irq)
+{
+ if (sysRegRead(AR5315_PCI_INT_STATUS) == AR5315_PCI_ABORT_INT)
+ pci_abort_irq();
+ else {
+ do_IRQ(irq);
+ pci_ack_irq();
+ }
+}
+#endif
+
+static void ar5315_gpio_intr_enable(unsigned int irq)
+{
+ u32 gpio, mask;
+ gpio = irq - AR531X_GPIO_IRQ_BASE;
+ mask = 1 << gpio;
+ gpiointmask |= mask;
+
+ /* reconfigure GPIO line as input */
+ sysRegMask(AR5315_GPIO_CR, AR5315_GPIO_CR_M(gpio), AR5315_GPIO_CR_I(gpio));
+
+ /* Enable interrupt with edge detection */
+ sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(3));
+}
+
+static void ar5315_gpio_intr_disable(unsigned int irq)
+{
+ u32 gpio, mask;
+ gpio = irq - AR531X_GPIO_IRQ_BASE;
+ mask = 1 << gpio;
+
+ gpiointmask &= ~mask;
+
+ /* Disable interrupt with edge detection */
+ sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(0));
+}
+
+/* Turn on the specified AR531X_MISC_IRQ interrupt */
+static unsigned int ar5315_gpio_intr_startup(unsigned int irq)
+{
+ ar5315_gpio_intr_enable(irq);
+ return 0;
+}
+
+/* Turn off the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_gpio_intr_shutdown(unsigned int irq)
+{
+ ar5315_gpio_intr_disable(irq);
+}
+
+static void
+ar5315_gpio_intr_ack(unsigned int irq)
+{
+ ar5315_gpio_intr_disable(irq);
+}
+
+static void
+ar5315_gpio_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar5315_gpio_intr_enable(irq);
+}
+
+static struct irq_chip ar5315_gpio_intr_controller = {
+ .typename = "AR5315 GPIO",
+ .startup = ar5315_gpio_intr_startup,
+ .shutdown = ar5315_gpio_intr_shutdown,
+ .enable = ar5315_gpio_intr_enable,
+ .disable = ar5315_gpio_intr_disable,
+ .ack = ar5315_gpio_intr_ack,
+ .end = ar5315_gpio_intr_end,
+};
+
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_misc_intr_enable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR5315_IMR);
+ switch(irq)
+ {
+ case AR531X_MISC_IRQ_SPI:
+ imr |= AR5315_ISR_SPI;
+ break;
+
+ case AR531X_MISC_IRQ_TIMER:
+ imr |= AR5315_ISR_TIMER;
+ break;
+
+ case AR531X_MISC_IRQ_AHB_PROC:
+ imr |= AR5315_ISR_AHB;
+ break;
+
+ case AR531X_MISC_IRQ_AHB_DMA:
+ imr |= 0/* ?? */;
+ break;
+
+ case AR531X_MISC_IRQ_GPIO:
+ imr |= AR5315_ISR_GPIO;
+ break;
+
+ case AR531X_MISC_IRQ_UART0:
+ imr |= AR5315_ISR_UART0;
+ break;
+
+
+ case AR531X_MISC_IRQ_WATCHDOG:
+ imr |= AR5315_ISR_WD;
+ break;
+
+ case AR531X_MISC_IRQ_LOCAL:
+ imr |= 0/* ?? */;
+ break;
+
+ }
+ sysRegWrite(AR5315_IMR, imr);
+ imr=sysRegRead(AR5315_IMR); /* flush write buffer */
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_misc_intr_disable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = sysRegRead(AR5315_IMR);
+ switch(irq)
+ {
+ case AR531X_MISC_IRQ_SPI:
+ imr &= ~AR5315_ISR_SPI;
+ break;
+
+ case AR531X_MISC_IRQ_TIMER:
+ imr &= (~AR5315_ISR_TIMER);
+ break;
+
+ case AR531X_MISC_IRQ_AHB_PROC:
+ imr &= (~AR5315_ISR_AHB);
+ break;
+
+ case AR531X_MISC_IRQ_AHB_DMA:
+ imr &= 0/* ?? */;
+ break;
+
+ case AR531X_MISC_IRQ_GPIO:
+ imr &= ~AR5315_ISR_GPIO;
+ break;
+
+ case AR531X_MISC_IRQ_UART0:
+ imr &= (~AR5315_ISR_UART0);
+ break;
+
+ case AR531X_MISC_IRQ_WATCHDOG:
+ imr &= (~AR5315_ISR_WD);
+ break;
+
+ case AR531X_MISC_IRQ_LOCAL:
+ imr &= ~0/* ?? */;
+ break;
+
+ }
+ sysRegWrite(AR5315_IMR, imr);
+ sysRegRead(AR5315_IMR); /* flush write buffer */
+}
+
+/* Turn on the specified AR531X_MISC_IRQ interrupt */
+static unsigned int
+ar5315_misc_intr_startup(unsigned int irq)
+{
+ ar5315_misc_intr_enable(irq);
+ return 0;
+}
+
+/* Turn off the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_misc_intr_shutdown(unsigned int irq)
+{
+ ar5315_misc_intr_disable(irq);
+}
+
+static void
+ar5315_misc_intr_ack(unsigned int irq)
+{
+ ar5315_misc_intr_disable(irq);
+}
+
+static void
+ar5315_misc_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar5315_misc_intr_enable(irq);
+}
+
+static struct irq_chip ar5315_misc_intr_controller = {
+ .typename = "AR5315 misc",
+ .startup = ar5315_misc_intr_startup,
+ .shutdown = ar5315_misc_intr_shutdown,
+ .enable = ar5315_misc_intr_enable,
+ .disable = ar5315_misc_intr_disable,
+ .ack = ar5315_misc_intr_ack,
+ .end = ar5315_misc_intr_end,
+};
+
+static irqreturn_t ar5315_ahb_proc_handler(int cpl, void *dev_id)
+{
+ sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
+ sysRegRead(AR5315_AHB_ERR1);
+
+ printk("AHB fatal error\n");
+ machine_restart("AHB error"); /* Catastrophic failure */
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ar5315_ahb_proc_interrupt = {
+ .handler = ar5315_ahb_proc_handler,
+ .flags = IRQF_DISABLED,
+ .name = "ar5315_ahb_proc_interrupt",
+};
+
+
+static struct irqaction cascade = {
+ .handler = no_action,
+ .flags = IRQF_DISABLED,
+ .name = "cascade",
+};
+
+static void ar5315_gpio_intr_init(int irq_base)
+{
+ int i;
+
+ for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].chip = &ar5315_gpio_intr_controller;
+ }
+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
+ gpiointval = sysRegRead(AR5315_GPIO_DI);
+}
+
+void ar5315_misc_intr_init(int irq_base)
+{
+ int i;
+
+ for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].chip = &ar5315_misc_intr_controller;
+ }
+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5315_ahb_proc_interrupt);
+ setup_irq(AR5315_IRQ_MISC_INTRS, &cascade);
+ ar5315_gpio_intr_init(AR531X_GPIO_IRQ_BASE);
+}
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/bootinfo.h>
+#include <asm/paccess.h>
+#include <asm/irq_cpu.h>
+#include <asm/io.h>
+#include "ar531x.h"
+
+#define AR531X_MEM_BASE 0x80800000UL
+#define AR531X_MEM_SIZE 0x00ffffffUL
+#define AR531X_IO_SIZE 0x00007fffUL
+#define IDSEL_SHIFT 13
+
+static spinlock_t ar531x_pci_lock = SPIN_LOCK_UNLOCKED;
+static u32 cfgaddr;
+
+static int config_access(int busno, int dev, int func, int where, int size, u32 ptr, int write)
+{
+ u32 address; /* Address to read from */
+ u32 reg;
+ unsigned long flags;
+ int ret = -1;
+ if ((busno != 0) || ((dev != 0) && (dev != 3)) || (func > 2))
+ return ret;
+
+ spin_lock_irqsave(&ar531x_pci_lock, flags);
+
+ /* Select Configuration access */
+ reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+ reg |= AR5315_PCIMISC_CFG_SEL;
+ sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+ (void)sysRegRead(AR5315_PCI_MISC_CONFIG);
+
+ address = (u32)cfgaddr + (1 << (IDSEL_SHIFT + dev)) + (func << 8) + where;
+
+ if (size == 1)
+ address ^= 0x3;
+ else if (size == 2)
+ address ^= 0x2;
+
+ if (write) {
+ if (size == 1)
+ ret = put_dbe(ptr, (u8 *) address);
+ else if (size == 2)
+ ret = put_dbe(ptr, (u16 *) address);
+ else if (size == 4)
+ ret = put_dbe(ptr, (u32 *) address);
+ } else {
+ if (size == 1)
+ ret = get_dbe(*((u32 *)ptr), (u8 *) address);
+ else if (size == 2)
+ ret = get_dbe(*((u32 *)ptr), (u16 *) address);
+ else if (size == 4)
+ ret = get_dbe(*((u32 *)ptr), (u32 *) address);
+ }
+
+ /* Select Memory access */
+ reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+ reg &= ~AR5315_PCIMISC_CFG_SEL;
+ sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+ (void)sysRegRead(AR5315_PCI_MISC_CONFIG);
+
+ spin_unlock_irqrestore(&ar531x_pci_lock, flags);
+
+ if (ret) {
+ *((u32 *)ptr) = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ar531x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
+{
+ return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, (u32) value, 0);
+}
+
+static int ar531x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
+{
+ return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value, 1);
+}
+
+struct pci_ops ar531x_pci_ops = {
+ .read = ar531x_pci_read,
+ .write = ar531x_pci_write,
+};
+
+static struct resource ar531x_mem_resource = {
+ .name = "AR531x PCI MEM",
+ .start = AR531X_MEM_BASE,
+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource ar531x_io_resource = {
+ .name = "AR531x PCI I/O",
+ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller ar531x_pci_controller = {
+ .pci_ops = &ar531x_pci_ops,
+ .mem_resource = &ar531x_mem_resource,
+ .io_resource = &ar531x_io_resource,
+ .mem_offset = 0x00000000UL,
+ .io_offset = 0x00000000UL,
+};
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return AR5315_IRQ_LCBUS_PCI;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ u32 reg;
+
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
+ pci_write_config_word(dev, 0x40, 0);
+
+ /* Clear any pending Abort or external Interrupts
+ * and enable interrupt processing */
+ reg = sysRegRead(AR5315_PCI_INTEN_REG);
+ reg &= ~AR5315_PCI_INT_ENABLE;
+ sysRegWrite(AR5315_PCI_INTEN_REG, reg);
+
+ reg = sysRegRead(AR5315_PCI_INT_STATUS);
+ reg |= (AR5315_PCI_ABORT_INT | AR5315_PCI_EXT_INT);
+ sysRegWrite(AR5315_PCI_INT_STATUS, reg);
+
+ reg = sysRegRead(AR5315_PCI_INT_MASK);
+ reg |= (AR5315_PCI_EXT_INT | AR5315_PCI_ABORT_INT);
+ sysRegWrite(AR5315_PCI_INT_MASK, reg);
+
+ reg = sysRegRead(AR5315_PCI_INTEN_REG);
+ reg |= AR5315_PCI_INT_ENABLE;
+ sysRegWrite(AR5315_PCI_INTEN_REG, reg);
+
+ return 0;
+}
+
+static void ar5315_pci_fixup(struct pci_dev *dev)
+{
+ struct pci_bus *bus = dev->bus;
+
+ if ((PCI_SLOT(dev->devfn) != 3) || (PCI_FUNC(dev->devfn) != 0) || (bus->number != 0))
+ return;
+
+#define _DEV bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)
+ printk("PCI: fixing up device %d,%d,%d\n", _DEV);
+ /* fix up mbars */
+ config_access(_DEV, PCI_BASE_ADDRESS_0, 4, HOST_PCI_MBAR0, 1);
+ config_access(_DEV, PCI_BASE_ADDRESS_1, 4, HOST_PCI_MBAR1, 1);
+ config_access(_DEV, PCI_BASE_ADDRESS_2, 4, HOST_PCI_MBAR2, 1);
+ config_access(_DEV, PCI_COMMAND, 4,
+ PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL|
+ PCI_COMMAND_INVALIDATE|PCI_COMMAND_PARITY|PCI_COMMAND_SERR|
+ PCI_COMMAND_FAST_BACK, 1);
+#undef _DEV
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar5315_pci_fixup);
+
+int __init ar5315_pci_init(void)
+{
+ u32 reg;
+
+ if (mips_machtype != MACH_ATHEROS_AR2315)
+ return -ENODEV;
+
+ printk("AR531x PCI init... \n");
+
+ cfgaddr = (u32) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
+ ar531x_pci_controller.io_map_base =
+ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
+ set_io_port_base(ar531x_pci_controller.io_map_base); /* PCI I/O space */
+
+ reg = sysRegRead(AR5315_RESET);
+ sysRegWrite(AR5315_RESET, reg | AR5315_RESET_PCIDMA);
+
+ udelay(10*1000);
+
+ sysRegWrite(AR5315_RESET, reg & ~AR5315_RESET_PCIDMA);
+ sysRegRead(AR5315_RESET); /* read after */
+
+ udelay(10*1000);
+
+ reg = sysRegRead(AR5315_ENDIAN_CTL);
+ reg |= AR5315_CONFIG_PCIAHB | AR5315_CONFIG_PCIAHB_BRIDGE;
+
+ sysRegWrite(AR5315_ENDIAN_CTL, reg);
+
+ reg = sysRegRead(AR5315_PCICLK);
+ reg = 4;
+ sysRegWrite(AR5315_PCICLK, reg);
+
+ reg = sysRegRead(AR5315_AHB_ARB_CTL);
+ reg |= (ARB_PCI);
+ sysRegWrite(AR5315_AHB_ARB_CTL, reg);
+
+ reg = sysRegRead(AR5315_IF_CTL);
+ reg &= ~(IF_PCI_CLK_MASK | IF_MASK);
+ reg |= (IF_PCI | IF_PCI_HOST | IF_PCI_INTR | (IF_PCI_CLK_OUTPUT_CLK << IF_PCI_CLK_SHIFT));
+
+ sysRegWrite(AR5315_IF_CTL, reg);
+
+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
+ reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+ reg &= ~(AR5315_PCIMISC_RST_MODE);
+ reg |= AR5315_PCIRST_LOW;
+ sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+
+ /* wait for 100 ms */
+ udelay(100*1000);
+
+ /* Bring the PCI out of reset */
+ reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+ reg &= ~(AR5315_PCIMISC_RST_MODE);
+ reg |= (AR5315_PCIRST_HIGH | AR5315_PCICACHE_DIS | 0x8);
+ sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+
+ sysRegWrite(AR5315_PCI_UNCACHE_CFG,
+ 0x1E | /* 1GB uncached */
+ (1 << 5) | /* Enable uncached */
+ (0x2 << 30) /* Base: 0x80000000 */
+ );
+ (void)sysRegRead(AR5315_PCI_UNCACHE_CFG); /* flush */
+
+ udelay(500*1000);
+
+ /* dirty hack - anyone with a datasheet that knows the memory map ? */
+ ioport_resource.start = 0x10000000;
+ ioport_resource.end = 0xffffffff;
+ iomem_resource.start = 0x10000000;
+ iomem_resource.end = 0xffffffff;
+
+ register_pci_controller(&ar531x_pci_controller);
+
+ printk("done\n");
+ return 0;
+}
+
+arch_initcall(ar5315_pci_init);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/random.h>
+#include <asm/bootinfo.h>
+#include <asm/irq_cpu.h>
+#include <asm/io.h>
+#include <ar531x.h>
+
+char *board_config = NULL;
+char *radio_config = NULL;
+int broken_boarddata = 0;
+
+extern int early_serial_setup(struct uart_port *port);
+
+static inline bool
+check_radio_magic(unsigned char *addr)
+{
+ addr += 0x7a; /* offset for flash magic */
+ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
+ return 1;
+ }
+ return 0;
+}
+
+static inline bool
+check_board_data(unsigned char *flash_limit, unsigned char *addr, bool broken)
+{
+ /* config magic found */
+ if ( *(int *)addr == 0x35333131)
+ return 1;
+
+ if (!broken)
+ return 0;
+
+ if (check_radio_magic(addr + 0xf8))
+ radio_config = addr + 0xf8;
+ if ((addr < flash_limit + 0x10000) &&
+ check_radio_magic(addr + 0x10000))
+ radio_config = addr + 0x10000;
+
+ if (radio_config) {
+ /* broken board data detected, use radio data to find the offset,
+ * user will fix this */
+ broken_boarddata = 1;
+ return 1;
+ }
+ return 0;
+}
+
+static u8 *find_board_config(char *flash_limit, bool broken)
+{
+ char *addr;
+ int found = 0;
+
+ for (addr = (char *) (flash_limit - 0x1000);
+ addr >= (char *) (flash_limit - 0x30000);
+ addr -= 0x1000) {
+
+ if (check_board_data(flash_limit, addr, broken)) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found)
+ addr = NULL;
+
+ return addr;
+}
+
+static u8 *find_radio_config(char *flash_limit, char *board_config)
+{
+ int dataFound;
+ char *radio_config;
+
+ /*
+ * Now find the start of Radio Configuration data, using heuristics:
+ * Search forward from Board Configuration data by 0x1000 bytes
+ * at a time until we find non-0xffffffff.
+ */
+ dataFound = 0;
+ for (radio_config = board_config + 0x1000;
+ (radio_config < flash_limit);
+ radio_config += 0x1000) {
+ if ((*(u32 *)radio_config != 0xffffffff) &&
+ check_radio_magic(radio_config)) {
+ dataFound = 1;
+ break;
+ }
+ }
+
+#ifdef CONFIG_ATHEROS_AR5315
+ if (!dataFound) { /* AR2316 relocates radio config to new location */
+ for (radio_config = board_config + 0xf8;
+ (radio_config < flash_limit - 0x1000 + 0xf8);
+ radio_config += 0x1000) {
+ if ((*(u32 *)radio_config != 0xffffffff) &&
+ check_radio_magic(radio_config)) {
+ dataFound = 1;
+ break;
+ }
+ }
+ }
+#endif
+
+ if (!dataFound) {
+ printk("Could not find Radio Configuration data\n");
+ radio_config = 0;
+ }
+
+ return (u8 *) radio_config;
+}
+
+int __init ar531x_find_config(char *flash_limit)
+{
+ struct ar531x_boarddata *bd;
+ unsigned int rcfg_size;
+ char *bcfg, *rcfg;
+
+ /* Copy the board and radio data to RAM, because with the new
+ * spiflash driver, accessing the mapped memory directly is no
+ * longer safe */
+
+ bcfg = find_board_config(flash_limit, false);
+ if (!bcfg)
+ bcfg = find_board_config(flash_limit, true);
+ if (!bcfg) {
+ printk("WARNING: No board configuration data found!\n");
+ return -ENODEV;
+ }
+
+ board_config = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
+ memcpy(board_config, bcfg, 0x100);
+ if (broken_boarddata) {
+ printk("WARNING: broken board data detected\n");
+ bd = (struct ar531x_boarddata *)board_config;
+ if (!memcmp(bd->enet0Mac, "\x00\x00\x00\x00\x00\x00", 6)) {
+ printk("Fixing up empty mac addresses\n");
+ bd->enet0Mac[1] = 0x13;
+ bd->enet0Mac[2] = 0x37;
+ get_random_bytes(bd->enet0Mac + 3, 3);
+ bd->wlan0Mac[1] = 0x13;
+ bd->wlan0Mac[2] = 0x37;
+ get_random_bytes(bd->wlan0Mac + 3, 3);
+ }
+ }
+
+
+ /* Radio config starts 0x100 bytes after board config, regardless
+ * of what the physical layout on the flash chip looks like */
+
+ if (radio_config)
+ rcfg = radio_config;
+ else
+ rcfg = find_radio_config(flash_limit, bcfg);
+
+ if (!rcfg)
+ return -ENODEV;
+
+ radio_config = board_config + 0x100 + ((rcfg - bcfg) & 0xfff);
+ printk("Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, radio_config - board_config);
+ rcfg_size = BOARD_CONFIG_BUFSZ - (radio_config - board_config);
+ memcpy(radio_config, rcfg, rcfg_size);
+
+ return 0;
+}
+
+void __init serial_setup(unsigned long mapbase, unsigned int uartclk)
+{
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_MEM;
+ s.irq = AR531X_MISC_IRQ_UART0;
+ s.regshift = 2;
+ s.mapbase = mapbase;
+ s.uartclk = uartclk;
+ s.membase = (void __iomem *)s.mapbase;
+
+ early_serial_setup(&s);
+}
+
+void __init plat_mem_setup(void)
+{
+ DO_AR5312(ar5312_plat_setup();)
+ DO_AR5315(ar5315_plat_setup();)
+
+ /* Disable data watchpoints */
+ write_c0_watchlo0(0);
+}
+
+const char *get_system_type(void)
+{
+ switch (mips_machtype) {
+#ifdef CONFIG_ATHEROS_AR5312
+ case MACH_ATHEROS_AR5312:
+ return "Atheros AR5312";
+
+ case MACH_ATHEROS_AR2312:
+ return "Atheros AR2312";
+
+ case MACH_ATHEROS_AR2313:
+ return "Atheros AR2313";
+#endif
+#ifdef CONFIG_ATHEROS_AR5315
+ case MACH_ATHEROS_AR2315:
+ return "Atheros AR2315";
+ case MACH_ATHEROS_AR2316:
+ return "Atheros AR2316";
+ case MACH_ATHEROS_AR2317:
+ return "Atheros AR2317";
+ case MACH_ATHEROS_AR2318:
+ return "Atheros AR2318";
+#endif
+ }
+ return "Atheros (unknown)";
+}
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+void __init plat_timer_setup(struct irqaction *irq)
+{
+ unsigned int count;
+
+ /* Usually irq is timer_irqaction (timer_interrupt) */
+ setup_irq(AR531X_IRQ_CPU_CLOCK, irq);
+
+ /* to generate the first CPU timer interrupt */
+ count = read_c0_count();
+ write_c0_compare(count + 1000);
+}
+#endif
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ DO_AR5312(ar5312_irq_dispatch();)
+ DO_AR5315(ar5315_irq_dispatch();)
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
+void (*board_time_init)(void);
+void __init plat_time_init(void) {
+ board_time_init();
+}
+#endif
+
+void __init arch_init_irq(void)
+{
+ clear_c0_status(ST0_IM);
+ mips_cpu_irq_init();
+
+ /* Initialize interrupt controllers */
+ DO_AR5312(ar5312_misc_intr_init(AR531X_MISC_IRQ_BASE);)
+ DO_AR5315(ar5315_misc_intr_init(AR531X_MISC_IRQ_BASE);)
+}
+
+static int __init ar531x_register_gpiodev(void)
+{
+ static struct resource res = {
+ .start = 0xFFFFFFFF,
+ };
+ struct platform_device *pdev;
+
+ printk(KERN_INFO "ar531x: Registering GPIODEV device\n");
+
+ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
+
+ if (!pdev) {
+ printk(KERN_ERR "ar531x: GPIODEV init failed\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+device_initcall(ar531x_register_gpiodev);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright MontaVista Software Inc
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Prom setup file for ar531x
+ */
+
+#include <linux/init.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <ar531x.h>
+
+void __init prom_init(void)
+{
+ char **argv;
+
+ mips_machtype = -1;
+
+ DO_AR5312(ar5312_prom_init();)
+ DO_AR5315(ar5315_prom_init();)
+#if 0
+ argv = (char **)fw_arg1;
+ /* RedBoot desired command line is argv[1] */
+ strcat(arcs_cmdline, argv[1]);
+#endif
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
--- /dev/null
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/kobject.h>
+#include <linux/workqueue.h>
+#include <linux/skbuff.h>
+#include <linux/netlink.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <ar531x.h>
+
+#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(bcfg->resetConfigGpio))
+
+struct event_t {
+ struct work_struct wq;
+ int set;
+ unsigned long jiffies;
+};
+
+static struct ar531x_boarddata *bcfg;
+static struct timer_list rst_button_timer;
+
+extern struct sock *uevent_sock;
+extern u64 uevent_next_seqnum(void);
+static unsigned long seen;
+
+static inline void add_msg(struct sk_buff *skb, char *msg)
+{
+ char *scratch;
+ scratch = skb_put(skb, strlen(msg) + 1);
+ sprintf(scratch, msg);
+}
+
+static void hotplug_button(struct work_struct *wq)
+{
+ struct sk_buff *skb;
+ struct event_t *event;
+ size_t len;
+ char *scratch, *s;
+ char buf[128];
+
+ event = container_of(wq, struct event_t, wq);
+ if (!uevent_sock)
+ goto done;
+
+ /* allocate message with the maximum possible size */
+ s = event->set ? "pressed" : "released";
+ len = strlen(s) + 2;
+ skb = alloc_skb(len + 2048, GFP_KERNEL);
+ if (!skb)
+ goto done;
+
+ /* add header */
+ scratch = skb_put(skb, len);
+ sprintf(scratch, "%s@",s);
+
+ /* copy keys to our continuous event payload buffer */
+ add_msg(skb, "HOME=/");
+ add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
+ add_msg(skb, "SUBSYSTEM=button");
+ add_msg(skb, "BUTTON=reset");
+ add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
+ sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
+ add_msg(skb, buf);
+ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
+ add_msg(skb, buf);
+
+ NETLINK_CB(skb).dst_group = 1;
+ netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
+
+done:
+ kfree(event);
+}
+
+static int no_release_workaround = 1;
+
+static void
+reset_button_poll(unsigned long unused)
+{
+ struct event_t *event;
+ int gpio = ~0;
+
+ if(!no_release_workaround)
+ return;
+
+ DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);)
+ gpio &= 1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE);
+ if(gpio)
+ {
+ rst_button_timer.expires = jiffies + (HZ / 4);
+ add_timer(&rst_button_timer);
+ } else {
+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
+ if (!event)
+ {
+ printk("Could not alloc hotplug event\n");
+ return;
+ }
+ event->set = 0;
+ event->jiffies = jiffies;
+ INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
+ schedule_work(&event->wq);
+ }
+}
+
+static irqreturn_t button_handler(int irq, void *dev_id)
+{
+ static int pressed = 0;
+ struct event_t *event;
+ u32 gpio = ~0;
+
+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
+ if (!event)
+ return IRQ_NONE;
+
+ pressed = !pressed;
+
+ DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);)
+ gpio &= 1 << (irq - AR531X_GPIO_IRQ_BASE);
+
+ event->set = gpio;
+ if(!event->set)
+ no_release_workaround = 0;
+
+ event->jiffies = jiffies;
+
+ INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
+ schedule_work(&event->wq);
+
+ seen = jiffies;
+ if(event->set && no_release_workaround)
+ mod_timer(&rst_button_timer, jiffies + (HZ / 4));
+
+ return IRQ_HANDLED;
+}
+
+void ar531x_disable_reset_button(void)
+{
+ disable_irq(AR531X_RESET_GPIO_IRQ);
+}
+
+EXPORT_SYMBOL(ar531x_disable_reset_button);
+
+int __init ar531x_init_reset(void)
+{
+ bcfg = (struct ar531x_boarddata *) board_config;
+
+ seen = jiffies;
+
+ init_timer(&rst_button_timer);
+ rst_button_timer.function = reset_button_poll;
+ rst_button_timer.expires = jiffies + HZ / 50;
+ add_timer(&rst_button_timer);
+
+ request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar531x_reset", NULL);
+
+ return 0;
+}
+
+
+
+module_init(ar531x_init_reset);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef AR5312_H
+#define AR5312_H
+
+#include <asm/addrspace.h>
+
+/*
+ * IRQs
+ */
+
+#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+
+/* Address Map */
+#define AR531X_WLAN0 0x18000000
+#define AR531X_WLAN1 0x18500000
+#define AR531X_ENET0 0x18100000
+#define AR531X_ENET1 0x18200000
+#define AR531X_SDRAMCTL 0x18300000
+#define AR531X_FLASHCTL 0x18400000
+#define AR531X_APBBASE 0x1c000000
+#define AR531X_FLASH 0x1e000000
+#define AR531X_UART0 0xbc000003 /* UART MMR */
+
+/*
+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available. The AR5312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR531X_NUM_ENET_MAC 2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+#define AR531X_RADIO_MASK_OFF 0xc8
+#define AR531X_RADIO0_MASK 0x0003
+#define AR531X_RADIO1_MASK 0x000c
+#define AR531X_RADIO1_S 2
+
+/*
+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
+ * should be considered available.
+ */
+#define AR531X_NUM_WMAC 2
+
+/* Reset/Timer Block Address Map */
+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
+
+/* AR531X_WD_CTRL register bit field definitions */
+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR531X_WD_CTRL_NMI 0x0001
+#define AR531X_WD_CTRL_RESET 0x0002
+
+/* AR531X_ISR register bit field definitions */
+#define AR531X_ISR_NONE 0x0000
+#define AR531X_ISR_TIMER 0x0001
+#define AR531X_ISR_AHBPROC 0x0002
+#define AR531X_ISR_AHBDMA 0x0004
+#define AR531X_ISR_GPIO 0x0008
+#define AR531X_ISR_UART0 0x0010
+#define AR531X_ISR_UART0DMA 0x0020
+#define AR531X_ISR_WD 0x0040
+#define AR531X_ISR_LOCAL 0x0080
+
+/* AR531X_RESET register bit field definitions */
+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
+
+#define AR531X_RESET_WMAC0_BITS \
+ AR531X_RESET_WLAN0 |\
+ AR531X_RESET_WARM_WLAN0_MAC |\
+ AR531X_RESET_WARM_WLAN0_BB
+
+#define AR531X_RESERT_WMAC1_BITS \
+ AR531X_RESET_WLAN1 |\
+ AR531X_RESET_WARM_WLAN1_MAC |\
+ AR531X_RESET_WARM_WLAN1_BB
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR5312 and AR2312 */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+
+/* AR531X_ENABLE register bit field definitions */
+#define AR531X_ENABLE_WLAN0 0x0001
+#define AR531X_ENABLE_ENET0 0x0002
+#define AR531X_ENABLE_ENET1 0x0004
+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
+#define AR531X_ENABLE_WLAN1 \
+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
+
+/* AR531X_REV register bit field definitions */
+#define AR531X_REV_WMAC_MAJ 0xf000
+#define AR531X_REV_WMAC_MAJ_S 12
+#define AR531X_REV_WMAC_MIN 0x0f00
+#define AR531X_REV_WMAC_MIN_S 8
+#define AR531X_REV_MAJ 0x00f0
+#define AR531X_REV_MAJ_S 4
+#define AR531X_REV_MIN 0x000f
+#define AR531X_REV_MIN_S 0
+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR531X_REV_MAJ_AR5312 0x4
+#define AR531X_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
+/* AR531X_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S 0
+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
+#define FLASHCTL_WST1_S 5
+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
+#define FLASHCTL_WST2_S 11
+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
+#define FLASHCTL_AC_S 16
+#define FLASHCTL_AC_128K 0x00000000
+#define FLASHCTL_AC_256K 0x00010000
+#define FLASHCTL_AC_512K 0x00020000
+#define FLASHCTL_AC_1M 0x00030000
+#define FLASHCTL_AC_2M 0x00040000
+#define FLASHCTL_AC_4M 0x00050000
+#define FLASHCTL_AC_8M 0x00060000
+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
+#define FLASHCTL_WP 0x04000000 /* Write protect */
+#define FLASHCTL_BM 0x08000000 /* Burst mode */
+#define FLASHCTL_MW 0x30000000 /* Memory width */
+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_AC0_S 8
+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_AC1_S 12
+
+/* GPIO Address Map */
+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
+
+/* GPIO Control Register bit field definitions */
+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
+
+#endif
+
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef AR5315_H
+#define AR5315_H
+
+/*
+ * IRQs
+ */
+#define AR5315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR5315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR5315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR5315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR5315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+
+/*
+ * Address map
+ */
+#define AR5315_SDRAM0 0x00000000 /* DRAM */
+#define AR5315_SPI_READ 0x08000000 /* SPI FLASH */
+#define AR5315_WLAN0 0xB0000000 /* Wireless MMR */
+#define AR5315_PCI 0xB0100000 /* PCI MMR */
+#define AR5315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
+#define AR5315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
+#define AR5315_ENET0 0xB0500000 /* ETHERNET MMR */
+#define AR5315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
+#define AR5315_UART0 0xB1100003 /* UART MMR */
+#define AR5315_SPI 0xB1300000 /* SPI FLASH MMR */
+#define AR5315_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */
+#define AR5315_RAM1 0x40000000 /* ram alias */
+#define AR5315_PCIEXT 0x80000000 /* pci external */
+#define AR5315_RAM2 0xc0000000 /* ram alias */
+#define AR5315_RAM3 0xe0000000 /* ram alias */
+
+/*
+ * Reset Register
+ */
+#define AR5315_COLD_RESET (AR5315_DSLBASE + 0x0000)
+
+/* Cold Reset */
+#define RESET_COLD_AHB 0x00000001
+#define RESET_COLD_APB 0x00000002
+#define RESET_COLD_CPU 0x00000004
+#define RESET_COLD_CPUWARM 0x00000008
+#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
+
+#define AR5317_RESET_SYSTEM 0x00000010
+
+/* Warm Reset */
+
+#define AR5315_RESET (AR5315_DSLBASE + 0x0004)
+
+#define AR5315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
+#define AR5315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
+#define AR5315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
+#define AR5315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
+#define AR5315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
+#define AR5315_RESET_LOCAL 0x00000020 /* warm reset local bus */
+#define AR5315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
+#define AR5315_RESET_SPI 0x00000080 /* warm reset SPI interface */
+#define AR5315_RESET_UART0 0x00000100 /* warm reset UART0 */
+#define AR5315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
+#define AR5315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
+#define AR5315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
+
+/*
+ * AHB master arbitration control
+ */
+#define AR5315_AHB_ARB_CTL (AR5315_DSLBASE + 0x0008)
+
+#define ARB_CPU 0x00000001 /* CPU, default */
+#define ARB_WLAN 0x00000002 /* WLAN */
+#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
+#define ARB_LOCAL 0x00000008 /* LOCAL */
+#define ARB_PCI 0x00000010 /* PCI */
+#define ARB_ETHERNET 0x00000020 /* Ethernet */
+#define ARB_RETRY 0x00000100 /* retry policy, debug only */
+
+/*
+ * Config Register
+ */
+#define AR5315_ENDIAN_CTL (AR5315_DSLBASE + 0x000c)
+
+#define AR5315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
+#define AR5315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
+#define AR5315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
+#define AR5315_CONFIG_PCI 0x00000008 /* PCI byteswap */
+#define AR5315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
+#define AR5315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
+#define AR5315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
+
+#define AR5315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
+#define AR5315_CONFIG_CPU 0x00000400 /* CPU big endian */
+#define AR5315_CONFIG_PCIAHB 0x00000800
+#define AR5315_CONFIG_PCIAHB_BRIDGE 0x00001000
+#define AR5315_CONFIG_SPI 0x00008000 /* SPI byteswap */
+#define AR5315_CONFIG_CPU_DRAM 0x00010000
+#define AR5315_CONFIG_CPU_PCI 0x00020000
+#define AR5315_CONFIG_CPU_MMR 0x00040000
+#define AR5315_CONFIG_BIG 0x00000400
+
+
+/*
+ * NMI control
+ */
+#define AR5315_NMI_CTL (AR5315_DSLBASE + 0x0010)
+
+#define NMI_EN 1
+
+/*
+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
+ */
+#define AR5315_SREV (AR5315_DSLBASE + 0x0014)
+
+#define AR5315_REV_MAJ 0x00f0
+#define AR5315_REV_MAJ_S 4
+#define AR5315_REV_MIN 0x000f
+#define AR5315_REV_MIN_S 0
+#define AR5315_REV_CHIP (AR5315_REV_MAJ|AR5315_REV_MIN)
+
+/*
+ * Interface Enable
+ */
+#define AR5315_IF_CTL (AR5315_DSLBASE + 0x0018)
+
+#define IF_MASK 0x00000007
+#define IF_DISABLED 0
+#define IF_PCI 1
+#define IF_TS_LOCAL 2
+#define IF_ALL 3 /* only for emulation with separate pins */
+#define IF_LOCAL_HOST 0x00000008
+#define IF_PCI_HOST 0x00000010
+#define IF_PCI_INTR 0x00000020
+#define IF_PCI_CLK_MASK 0x00030000
+#define IF_PCI_CLK_INPUT 0
+#define IF_PCI_CLK_OUTPUT_LOW 1
+#define IF_PCI_CLK_OUTPUT_CLK 2
+#define IF_PCI_CLK_OUTPUT_HIGH 3
+#define IF_PCI_CLK_SHIFT 16
+
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define REV_MAJ_AR5311 0x01
+#define REV_MAJ_AR5312 0x04
+#define REV_MAJ_AR5315 0x0B
+
+/*
+ * APB Interrupt control
+ */
+
+#define AR5315_ISR (AR5315_DSLBASE + 0x0020)
+#define AR5315_IMR (AR5315_DSLBASE + 0x0024)
+#define AR5315_GISR (AR5315_DSLBASE + 0x0028)
+
+#define AR5315_ISR_UART0 0x0001 /* high speed UART */
+#define AR5315_ISR_I2C_RSVD 0x0002 /* I2C bus */
+#define AR5315_ISR_SPI 0x0004 /* SPI bus */
+#define AR5315_ISR_AHB 0x0008 /* AHB error */
+#define AR5315_ISR_APB 0x0010 /* APB error */
+#define AR5315_ISR_TIMER 0x0020 /* timer */
+#define AR5315_ISR_GPIO 0x0040 /* GPIO */
+#define AR5315_ISR_WD 0x0080 /* watchdog */
+#define AR5315_ISR_IR_RSVD 0x0100 /* IR */
+
+#define AR5315_GISR_MISC 0x0001
+#define AR5315_GISR_WLAN0 0x0002
+#define AR5315_GISR_MPEGTS_RSVD 0x0004
+#define AR5315_GISR_LOCALPCI 0x0008
+#define AR5315_GISR_WMACPOLL 0x0010
+#define AR5315_GISR_TIMER 0x0020
+#define AR5315_GISR_ETHERNET 0x0040
+
+/*
+ * Interrupt routing from IO to the processor IP bits
+ * Define our inter mask and level
+ */
+#define AR5315_INTR_MISCIO SR_IBIT3
+#define AR5315_INTR_WLAN0 SR_IBIT4
+#define AR5315_INTR_ENET0 SR_IBIT5
+#define AR5315_INTR_LOCALPCI SR_IBIT6
+#define AR5315_INTR_WMACPOLL SR_IBIT7
+#define AR5315_INTR_COMPARE SR_IBIT8
+
+/*
+ * Timers
+ */
+#define AR5315_TIMER (AR5315_DSLBASE + 0x0030)
+#define AR5315_RELOAD (AR5315_DSLBASE + 0x0034)
+#define AR5315_WD (AR5315_DSLBASE + 0x0038)
+#define AR5315_WDC (AR5315_DSLBASE + 0x003c)
+
+#define WDC_RESET 0x00000002 /* reset on watchdog */
+#define WDC_NMI 0x00000001 /* NMI on watchdog */
+#define WDC_IGNORE_EXPIRATION 0x00000000
+
+/*
+ * CPU Performance Counters
+ */
+#define AR5315_PERFCNT0 (AR5315_DSLBASE + 0x0048)
+#define AR5315_PERFCNT1 (AR5315_DSLBASE + 0x004c)
+
+#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */
+#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */
+#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */
+#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */
+#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */
+#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
+#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
+
+#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */
+#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */
+#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
+#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
+#define PERF_VRADDR 0x0010 /* Count valid read address cycles */
+#define PERF_VWADDR 0x0020 /* Count valid write address cycles */
+#define PERF_VWDATA 0x0040 /* Count valid write data cycles */
+
+/*
+ * AHB Error Reporting.
+ */
+#define AR5315_AHB_ERR0 (AR5315_DSLBASE + 0x0050) /* error */
+#define AR5315_AHB_ERR1 (AR5315_DSLBASE + 0x0054) /* haddr */
+#define AR5315_AHB_ERR2 (AR5315_DSLBASE + 0x0058) /* hwdata */
+#define AR5315_AHB_ERR3 (AR5315_DSLBASE + 0x005c) /* hrdata */
+#define AR5315_AHB_ERR4 (AR5315_DSLBASE + 0x0060) /* status */
+
+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
+ /* write 1 to clear all bits in ERR0 */
+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
+
+#define PROCERR_HMAST 0x0000000f
+#define PROCERR_HMAST_DFLT 0
+#define PROCERR_HMAST_WMAC 1
+#define PROCERR_HMAST_ENET 2
+#define PROCERR_HMAST_PCIENDPT 3
+#define PROCERR_HMAST_LOCAL 4
+#define PROCERR_HMAST_CPU 5
+#define PROCERR_HMAST_PCITGT 6
+
+#define PROCERR_HMAST_S 0
+#define PROCERR_HWRITE 0x00000010
+#define PROCERR_HSIZE 0x00000060
+#define PROCERR_HSIZE_S 5
+#define PROCERR_HTRANS 0x00000180
+#define PROCERR_HTRANS_S 7
+#define PROCERR_HBURST 0x00000e00
+#define PROCERR_HBURST_S 9
+
+
+
+/*
+ * Clock Control
+ */
+#define AR5315_PLLC_CTL (AR5315_DSLBASE + 0x0064)
+#define AR5315_PLLV_CTL (AR5315_DSLBASE + 0x0068)
+#define AR5315_CPUCLK (AR5315_DSLBASE + 0x006c)
+#define AR5315_AMBACLK (AR5315_DSLBASE + 0x0070)
+#define AR5315_SYNCCLK (AR5315_DSLBASE + 0x0074)
+#define AR5315_DSL_SLEEP_CTL (AR5315_DSLBASE + 0x0080)
+#define AR5315_DSL_SLEEP_DUR (AR5315_DSLBASE + 0x0084)
+
+/* PLLc Control fields */
+#define PLLC_REF_DIV_M 0x00000003
+#define PLLC_REF_DIV_S 0
+#define PLLC_FDBACK_DIV_M 0x0000007C
+#define PLLC_FDBACK_DIV_S 2
+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
+#define PLLC_ADD_FDBACK_DIV_S 7
+#define PLLC_CLKC_DIV_M 0x0001c000
+#define PLLC_CLKC_DIV_S 14
+#define PLLC_CLKM_DIV_M 0x00700000
+#define PLLC_CLKM_DIV_S 20
+
+/* CPU CLK Control fields */
+#define CPUCLK_CLK_SEL_M 0x00000003
+#define CPUCLK_CLK_SEL_S 0
+#define CPUCLK_CLK_DIV_M 0x0000000c
+#define CPUCLK_CLK_DIV_S 2
+
+/* AMBA CLK Control fields */
+#define AMBACLK_CLK_SEL_M 0x00000003
+#define AMBACLK_CLK_SEL_S 0
+#define AMBACLK_CLK_DIV_M 0x0000000c
+#define AMBACLK_CLK_DIV_S 2
+
+#if defined(COBRA_EMUL)
+#define AR5315_AMBA_CLOCK_RATE 20000000
+#define AR5315_CPU_CLOCK_RATE 40000000
+#else
+#if defined(DEFAULT_PLL)
+#define AR5315_AMBA_CLOCK_RATE 40000000
+#define AR5315_CPU_CLOCK_RATE 40000000
+#else
+#define AR5315_AMBA_CLOCK_RATE 92000000
+#define AR5315_CPU_CLOCK_RATE 184000000
+#endif /* ! DEFAULT_PLL */
+#endif /* ! COBRA_EMUL */
+
+#define AR5315_UART_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
+#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
+
+/*
+ * The UART computes baud rate as:
+ * baud = clock / (16 * divisor)
+ * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL).
+ */
+#define DESIRED_BAUD_RATE 38400
+
+
+#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */
+
+
+ /*
+ * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode.
+ */
+#define ASSOC_STATUS_M 0x00000003
+#define ASSOC_STATUS_NONE 0
+#define ASSOC_STATUS_PENDING 1
+#define ASSOC_STATUS_ASSOCIATED 2
+#define LED_MODE_M 0x0000001c
+#define LED_BLINK_THRESHOLD_M 0x000000e0
+#define LED_SLOW_BLINK_MODE 0x00000100
+
+/*
+ * GPIO
+ */
+
+#define AR5315_GPIO_DI (AR5315_DSLBASE + 0x0088)
+#define AR5315_GPIO_DO (AR5315_DSLBASE + 0x0090)
+#define AR5315_GPIO_CR (AR5315_DSLBASE + 0x0098)
+#define AR5315_GPIO_INT (AR5315_DSLBASE + 0x00a0)
+
+#define AR5315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR5315_GPIO_CR_O(x) (1 << (x)) /* output */
+#define AR5315_GPIO_CR_I(x) (0) /* input */
+
+#define AR5315_GPIO_INT_S(x) (x) /* interrupt enable */
+#define AR5315_GPIO_INT_M (0x3F) /* mask for int */
+#define AR5315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
+#define AR5315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
+
+#define AR5315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
+#define AR5315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
+#define AR5315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
+#define AR5315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
+#define AR5315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
+
+#define AR5315_RESET_GPIO 5
+#define AR5315_NUM_GPIO 22
+
+
+/*
+ * PCI Clock Control
+ */
+
+#define AR5315_PCICLK (AR5315_DSLBASE + 0x00a4)
+
+#define AR5315_PCICLK_INPUT_M 0x3
+#define AR5315_PCICLK_INPUT_S 0
+
+#define AR5315_PCICLK_PLLC_CLKM 0
+#define AR5315_PCICLK_PLLC_CLKM1 1
+#define AR5315_PCICLK_PLLC_CLKC 2
+#define AR5315_PCICLK_REF_CLK 3
+
+#define AR5315_PCICLK_DIV_M 0xc
+#define AR5315_PCICLK_DIV_S 2
+
+#define AR5315_PCICLK_IN_FREQ 0
+#define AR5315_PCICLK_IN_FREQ_DIV_6 1
+#define AR5315_PCICLK_IN_FREQ_DIV_8 2
+#define AR5315_PCICLK_IN_FREQ_DIV_10 3
+
+/*
+ * Observation Control Register
+ */
+#define AR5315_OCR (AR5315_DSLBASE + 0x00b0)
+#define OCR_GPIO0_IRIN 0x0040
+#define OCR_GPIO1_IROUT 0x0080
+#define OCR_GPIO3_RXCLR 0x0200
+
+/*
+ * General Clock Control
+ */
+
+#define AR5315_MISCCLK (AR5315_DSLBASE + 0x00b4)
+#define MISCCLK_PLLBYPASS_EN 0x00000001
+#define MISCCLK_PROCREFCLK 0x00000002
+
+/*
+ * SDRAM Controller
+ * - No read or write buffers are included.
+ */
+#define AR5315_MEM_CFG (AR5315_SDRAMCTL + 0x00)
+#define AR5315_MEM_CTRL (AR5315_SDRAMCTL + 0x0c)
+#define AR5315_MEM_REF (AR5315_SDRAMCTL + 0x10)
+
+#define SDRAM_DATA_WIDTH_M 0x00006000
+#define SDRAM_DATA_WIDTH_S 13
+
+#define SDRAM_COL_WIDTH_M 0x00001E00
+#define SDRAM_COL_WIDTH_S 9
+
+#define SDRAM_ROW_WIDTH_M 0x000001E0
+#define SDRAM_ROW_WIDTH_S 5
+
+#define SDRAM_BANKADDR_BITS_M 0x00000018
+#define SDRAM_BANKADDR_BITS_S 3
+
+/*
+ * SPI Flash Interface Registers
+ */
+
+#define AR5315_SPI_CTL (AR5315_SPI + 0x00)
+#define AR5315_SPI_OPCODE (AR5315_SPI + 0x04)
+#define AR5315_SPI_DATA (AR5315_SPI + 0x08)
+
+#define SPI_CTL_START 0x00000100
+#define SPI_CTL_BUSY 0x00010000
+#define SPI_CTL_TXCNT_MASK 0x0000000f
+#define SPI_CTL_RXCNT_MASK 0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
+#define SPI_CTL_SIZE_MASK 0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK 0x03000000
+#define SPI_OPCODE_MASK 0x000000ff
+
+/*
+ * PCI-MAC Configuration registers
+ */
+#define PCI_MAC_RC (AR5315_PCI + 0x4000)
+#define PCI_MAC_SCR (AR5315_PCI + 0x4004)
+#define PCI_MAC_INTPEND (AR5315_PCI + 0x4008)
+#define PCI_MAC_SFR (AR5315_PCI + 0x400C)
+#define PCI_MAC_PCICFG (AR5315_PCI + 0x4010)
+#define PCI_MAC_SREV (AR5315_PCI + 0x4020)
+
+#define PCI_MAC_RC_MAC 0x00000001
+#define PCI_MAC_RC_BB 0x00000002
+
+#define PCI_MAC_SCR_SLMODE_M 0x00030000
+#define PCI_MAC_SCR_SLMODE_S 16
+#define PCI_MAC_SCR_SLM_FWAKE 0
+#define PCI_MAC_SCR_SLM_FSLEEP 1
+#define PCI_MAC_SCR_SLM_NORMAL 2
+
+#define PCI_MAC_SFR_SLEEP 0x00000001
+
+#define PCI_MAC_PCICFG_SPWR_DN 0x00010000
+
+
+/*
+ * PCI Bus Interface Registers
+ */
+#define AR5315_PCI_1MS_REG (AR5315_PCI + 0x0008)
+#define AR5315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
+
+#define AR5315_PCI_MISC_CONFIG (AR5315_PCI + 0x000c)
+#define AR5315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
+#define AR5315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
+#define AR5315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
+#define AR5315_PCIMISC_RST_MODE 0x00000030
+#define AR5315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
+#define AR5315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
+#define AR5315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
+#define AR5315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
+#define AR5315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
+#define AR5315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
+#define AR5315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
+#define AR5315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
+
+#define AR5315_PCI_OUT_TSTAMP (AR5315_PCI + 0x0010)
+
+#define AR5315_PCI_UNCACHE_CFG (AR5315_PCI + 0x0014)
+
+#define AR5315_PCI_IN_EN (AR5315_PCI + 0x0100)
+#define AR5315_PCI_IN_EN0 0x01 /* Enable chain 0 */
+#define AR5315_PCI_IN_EN1 0x02 /* Enable chain 1 */
+#define AR5315_PCI_IN_EN2 0x04 /* Enable chain 2 */
+#define AR5315_PCI_IN_EN3 0x08 /* Enable chain 3 */
+
+#define AR5315_PCI_IN_DIS (AR5315_PCI + 0x0104)
+#define AR5315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
+#define AR5315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
+#define AR5315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
+#define AR5315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
+
+#define AR5315_PCI_IN_PTR (AR5315_PCI + 0x0200)
+
+#define AR5315_PCI_OUT_EN (AR5315_PCI + 0x0400)
+#define AR5315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
+
+#define AR5315_PCI_OUT_DIS (AR5315_PCI + 0x0404)
+#define AR5315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
+
+#define AR5315_PCI_OUT_PTR (AR5315_PCI + 0x0408)
+
+#define AR5315_PCI_INT_STATUS (AR5315_PCI + 0x0500) /* write one to clr */
+#define AR5315_PCI_TXINT 0x00000001 /* Desc In Completed */
+#define AR5315_PCI_TXOK 0x00000002 /* Desc In OK */
+#define AR5315_PCI_TXERR 0x00000004 /* Desc In ERR */
+#define AR5315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
+#define AR5315_PCI_RXINT 0x00000010 /* Desc Out Completed */
+#define AR5315_PCI_RXOK 0x00000020 /* Desc Out OK */
+#define AR5315_PCI_RXERR 0x00000040 /* Desc Out ERR */
+#define AR5315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
+#define AR5315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
+#define AR5315_PCI_MASK 0x0000FFFF /* Desc Mask */
+#define AR5315_PCI_EXT_INT 0x02000000
+#define AR5315_PCI_ABORT_INT 0x04000000
+
+#define AR5315_PCI_INT_MASK (AR5315_PCI + 0x0504) /* same as INT_STATUS */
+
+#define AR5315_PCI_INTEN_REG (AR5315_PCI + 0x0508)
+#define AR5315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
+#define AR5315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
+
+#define AR5315_PCI_HOST_IN_EN (AR5315_PCI + 0x0800)
+#define AR5315_PCI_HOST_IN_DIS (AR5315_PCI + 0x0804)
+#define AR5315_PCI_HOST_IN_PTR (AR5315_PCI + 0x0810)
+#define AR5315_PCI_HOST_OUT_EN (AR5315_PCI + 0x0900)
+#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904)
+#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908)
+
+
+/*
+ * Local Bus Interface Registers
+ */
+#define AR5315_LB_CONFIG (AR5315_LOCAL + 0x0000)
+#define AR5315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
+#define AR5315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
+#define AR5315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
+#define AR5315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
+#define AR5315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
+#define AR5315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
+#define AR5315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
+#define AR5315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
+#define AR5315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
+#define AR5315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
+#define AR5315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
+#define AR5315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
+#define AR5315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
+#define AR5315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
+#define AR5315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
+#define AR5315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
+#define AR5315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
+#define AR5315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
+#define AR5315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
+#define AR5315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
+#define AR5315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
+#define AR5315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
+#define AR5315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
+#define AR5315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
+#define AR5315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
+
+#define AR5315_LB_CLKSEL (AR5315_LOCAL + 0x0004)
+#define AR5315_LBCLK_EXT 0x0001 /* use external clk for lb */
+
+#define AR5315_LB_1MS (AR5315_LOCAL + 0x0008)
+#define AR5315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
+
+#define AR5315_LB_MISCCFG (AR5315_LOCAL + 0x000C)
+#define AR5315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
+#define AR5315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
+#define AR5315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
+#define AR5315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
+#define AR5315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
+#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80
+#define AR5315_LBM_TIMEOUT_SHFT 7
+#define AR5315_LBM_PORTMUX 0x07000000
+
+
+#define AR5315_LB_RXTSOFF (AR5315_LOCAL + 0x0010)
+
+#define AR5315_LB_TX_CHAIN_EN (AR5315_LOCAL + 0x0100)
+#define AR5315_LB_TXEN_0 0x01
+#define AR5315_LB_TXEN_1 0x02
+#define AR5315_LB_TXEN_2 0x04
+#define AR5315_LB_TXEN_3 0x08
+
+#define AR5315_LB_TX_CHAIN_DIS (AR5315_LOCAL + 0x0104)
+#define AR5315_LB_TX_DESC_PTR (AR5315_LOCAL + 0x0200)
+
+#define AR5315_LB_RX_CHAIN_EN (AR5315_LOCAL + 0x0400)
+#define AR5315_LB_RXEN 0x01
+
+#define AR5315_LB_RX_CHAIN_DIS (AR5315_LOCAL + 0x0404)
+#define AR5315_LB_RX_DESC_PTR (AR5315_LOCAL + 0x0408)
+
+#define AR5315_LB_INT_STATUS (AR5315_LOCAL + 0x0500)
+#define AR5315_INT_TX_DESC 0x0001
+#define AR5315_INT_TX_OK 0x0002
+#define AR5315_INT_TX_ERR 0x0004
+#define AR5315_INT_TX_EOF 0x0008
+#define AR5315_INT_RX_DESC 0x0010
+#define AR5315_INT_RX_OK 0x0020
+#define AR5315_INT_RX_ERR 0x0040
+#define AR5315_INT_RX_EOF 0x0080
+#define AR5315_INT_TX_TRUNC 0x0100
+#define AR5315_INT_TX_STARVE 0x0200
+#define AR5315_INT_LB_TIMEOUT 0x0400
+#define AR5315_INT_LB_ERR 0x0800
+#define AR5315_INT_MBOX_WR 0x1000
+#define AR5315_INT_MBOX_RD 0x2000
+
+/* Bit definitions for INT MASK are the same as INT_STATUS */
+#define AR5315_LB_INT_MASK (AR5315_LOCAL + 0x0504)
+
+#define AR5315_LB_INT_EN (AR5315_LOCAL + 0x0508)
+#define AR5315_LB_MBOX (AR5315_LOCAL + 0x0600)
+
+
+
+/*
+ * IR Interface Registers
+ */
+#define AR5315_IR_PKTDATA (AR5315_IR + 0x0000)
+
+#define AR5315_IR_PKTLEN (AR5315_IR + 0x07fc) /* 0 - 63 */
+
+#define AR5315_IR_CONTROL (AR5315_IR + 0x0800)
+#define AR5315_IRCTL_TX 0x00000000 /* use as tranmitter */
+#define AR5315_IRCTL_RX 0x00000001 /* use as receiver */
+#define AR5315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
+#define AR5315_IRCTL_SAMPLECLK_SHFT 1
+#define AR5315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
+#define AR5315_IRCTL_OUTPUTCLK_SHFT 14
+
+#define AR5315_IR_STATUS (AR5315_IR + 0x0804)
+#define AR5315_IRSTS_RX 0x00000001 /* receive in progress */
+#define AR5315_IRSTS_TX 0x00000002 /* transmit in progress */
+
+#define AR5315_IR_CONFIG (AR5315_IR + 0x0808)
+#define AR5315_IRCFG_INVIN 0x00000001 /* invert input polarity */
+#define AR5315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
+#define AR5315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
+#define AR5315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
+#define AR5315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
+#define AR5315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
+#define AR5315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
+#define AR5315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
+#define AR5315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
+
+/*
+ * PCI memory constants: Memory area 1 and 2 are the same size -
+ * (twice the PCI_TLB_PAGE_SIZE). The definition of
+ * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine
+ * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size
+ * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space.
+ */
+
+#define CPU_TO_PCI_MEM_BASE1 0xE0000000
+#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE)
+
+
+/* TLB attributes for PCI transactions */
+
+#define PCI_MMU_PAGEMASK 0x00003FFF
+#define MMU_PAGE_UNCACHED 0x00000010
+#define MMU_PAGE_DIRTY 0x00000004
+#define MMU_PAGE_VALID 0x00000002
+#define MMU_PAGE_GLOBAL 0x00000001
+#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\
+ MMU_PAGE_VALID|MMU_PAGE_GLOBAL)
+#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */
+#define PCI_MEMORY_SPACE1_PHYS 0x80000000
+#define PCI_TLB_PAGE_SIZE 0x01000000
+#define TLB_HI_MASK 0xFFFFE000
+#define TLB_LO_MASK 0x3FFFFFFF
+#define PAGEMASK_SHIFT 11
+#define TLB_LO_SHIFT 6
+
+#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */
+
+#define HOST_PCI_DEV_ID 3
+#define HOST_PCI_MBAR0 0x10000000
+#define HOST_PCI_MBAR1 0x20000000
+#define HOST_PCI_MBAR2 0x30000000
+
+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
+#define PCI_DEVICE_MEM_SPACE 0x800000
+
+#endif
+
--- /dev/null
+#ifndef __AR531X_H
+#define __AR531X_H
+
+#include <linux/version.h>
+#include <asm/cpu-info.h>
+#include <ar531x_platform.h>
+#include <ar5312/ar5312.h>
+#include <ar5315/ar5315.h>
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
+extern void (*board_time_init)(void);
+#endif
+
+/*
+ * Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are
+ * using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime.
+ */
+#ifdef CONFIG_ATHEROS_AR5312
+#define DO_AR5312(...) \
+ if (current_cpu_data.cputype != CPU_4KEC) { \
+ __VA_ARGS__ \
+ }
+#else
+#define DO_AR5312(...)
+#endif
+#ifdef CONFIG_ATHEROS_AR5315
+#define DO_AR5315(...) \
+ if (current_cpu_data.cputype == CPU_4KEC) { \
+ __VA_ARGS__ \
+ }
+#else
+#define DO_AR5315(...)
+#endif
+
+#define AR531X_MISC_IRQ_BASE 0x20
+#define AR531X_GPIO_IRQ_BASE 0x30
+
+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
+
+/* Miscellaneous interrupts, which share IP6 */
+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
+#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
+#define AR531X_MISC_IRQ_COUNT 10
+
+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
+#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
+#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
+#define AR531X_GPIO_IRQ_COUNT 22
+
+#define sysRegRead(phys) \
+ (*(volatile u32 *)KSEG1ADDR(phys))
+
+#define sysRegWrite(phys, val) \
+ ((*(volatile u32 *)KSEG1ADDR(phys)) = (val))
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ar531x_boarddata {
+ u32 magic; /* board data is valid */
+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
+ u16 cksum; /* checksum (starting with BD_REV 2) */
+ u16 rev; /* revision of this struct */
+#define BD_REV 4
+ char boardName[64]; /* Name of board */
+ u16 major; /* Board major number */
+ u16 minor; /* Board minor number */
+ u32 config; /* Board configuration */
+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
+#define BD_UART1 0x00000004 /* UART1 is stuffed */
+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
+#define BD_SYSLED 0x00000020 /* System LED stuffed */
+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
+ u16 resetConfigGpio; /* Reset factory GPIO pin */
+ u16 sysLedGpio; /* System LED GPIO pin */
+
+ u32 cpuFreq; /* CPU core frequency in Hz */
+ u32 sysFreq; /* System frequency in Hz */
+ u32 cntFreq; /* Calculated C0_COUNT frequency */
+
+ u8 wlan0Mac[6];
+ u8 enet0Mac[6];
+ u8 enet1Mac[6];
+
+ u16 pciId; /* Pseudo PCIID for common code */
+ u16 memCap; /* cap bank1 in MB */
+
+ /* version 3 */
+ u8 wlan1Mac[6]; /* (ar5212) */
+};
+
+#define BOARD_CONFIG_BUFSZ 0x1000
+
+extern char *board_config, *radio_config;
+extern void serial_setup(unsigned long mapbase, unsigned int uartclk);
+extern int ar531x_find_config(char *flash_limit);
+
+extern void ar5312_prom_init(void);
+extern void ar5312_misc_intr_init(int irq_base);
+extern void ar5312_plat_setup(void);
+extern asmlinkage void ar5312_irq_dispatch(void);
+
+extern void ar5315_prom_init(void);
+extern void ar5315_misc_intr_init(int irq_base);
+extern void ar5315_plat_setup(void);
+extern asmlinkage void ar5315_irq_dispatch(void);
+extern void ar5315_pci_irq(int irq);
+static inline u32 sysRegMask(u32 phys, u32 mask, u32 value)
+{
+ u32 reg;
+
+ reg = sysRegRead(phys);
+ reg &= ~mask;
+ reg |= value & mask;
+ sysRegWrite(phys, reg);
+ reg = sysRegRead(phys); /* flush write to the hardware */
+
+ return reg;
+}
+
+#define AR531X_NUM_GPIO 8
+
+#endif
--- /dev/null
+#ifndef __AR531X_PLATFORM_H
+#define __AR531X_PLATFORM_H
+
+/*
+ * Board support data. The driver is required to locate
+ * and fill-in this information before passing a reference to
+ * this structure as the HAL_BUS_TAG parameter supplied to
+ * ath_hal_attach.
+ */
+struct ar531x_config {
+ const char *board; /* board config data */
+ const char *radio; /* radio config data */
+ int unit; /* unit number [0, 1] */
+ u32 tag; /* used as devid for now */
+};
+
+struct ar531x_eth {
+ int phy;
+ int mac;
+ u32 reset_base;
+ u32 reset_mac;
+ u32 reset_phy;
+ u32 phy_base;
+ char *board_config;
+ char *macaddr;
+};
+
+#endif /* __AR531X_PLATFORM_H */
--- /dev/null
+/*
+ * Atheros SoC specific CPU feature overrides
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
+ */
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+/* #define cpu_has_divec ? */
+/* #define cpu_has_vce ? */
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+/* #define cpu_has_mcheck ? */
+#define cpu_has_ejtag 1
+
+#if !defined(CONFIG_ATHEROS_AR5312)
+# define cpu_has_llsc 1
+#else
+/*
+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
+ * ll/sc instructions.
+ */
+# define cpu_has_llsc 0
+#endif
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+/* #define cpu_has_pindexed_dcache ? */
+
+/* #define cpu_icache_snoops_remote_store ? */
+
+#define cpu_has_mips32r1 1
+
+#if !defined(CONFIG_ATHEROS_AR5312)
+# define cpu_has_mips32r2 1
+#endif
+
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+
+/* #define cpu_has_nofpuex ? */
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+/* #define cpu_has_inclusive_pcaches ? */
+
+/* #define cpu_dcache_line_size() ? */
+/* #define cpu_icache_line_size() ? */
+
+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ */
+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
+
+#define PCI_DMA_OFFSET 0x20000000
+
+struct device;
+
+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+{
+ return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+ return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+ return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
+}
+
+static void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+ return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
--- /dev/null
+#ifndef _ATHEROS_GPIO_H_
+#define _ATHEROS_GPIO_H_
+
+#include "ar531x.h"
+
+/* Common AR531X global variables */
+/* extern u32 ar531x_gpio_intr_Mask; */
+
+/* AR5312 exported routines */
+#ifdef CONFIG_ATHEROS_AR5312
+asmlinkage void ar5312_gpio_irq_dispatch(void);
+#endif
+
+/* AR5315 exported routines */
+#ifdef CONFIG_ATHEROS_AR5315
+asmlinkage void ar5315_gpio_irq_dispatch(void);
+#endif
+
+/*
+ * Wrappers for the generic GPIO layer
+ */
+
+/* Sets a gpio to input, or returns ENXIO for non-existent gpio */
+static inline int gpio_direction_input(unsigned gpio) {
+ DO_AR5312( if (gpio > AR531X_NUM_GPIO) { \
+ return -ENXIO; \
+ } else { \
+ sysRegWrite(AR531X_GPIO_CR, \
+ sysRegRead(AR531X_GPIO_CR) | \
+ AR531X_GPIO_CR_I(gpio) ); \
+ return 0; \
+ } \
+ )
+ DO_AR5315( if (gpio > AR5315_NUM_GPIO) { \
+ return -ENXIO; \
+ } else { \
+ sysRegWrite(AR5315_GPIO_CR, \
+ ( sysRegRead(AR5315_GPIO_CR) & \
+ ~(AR5315_GPIO_CR_M(gpio)) ) | \
+ AR5315_GPIO_CR_I(gpio) ); \
+ return 0; \
+ } \
+ )
+ return -ENXIO;
+}
+
+/* Sets a gpio to output with value, or returns ENXIO for non-existent gpio */
+static inline int gpio_direction_output(unsigned gpio, int value) {
+ DO_AR5312( if (gpio > AR531X_NUM_GPIO) { \
+ return -ENXIO; \
+ } else { \
+ sysRegWrite(AR531X_GPIO_DO, \
+ ( (sysRegRead(AR531X_GPIO_DO) & \
+ ~(1 << gpio) ) | \
+ ((value!=0) << gpio)) ); \
+ sysRegWrite(AR531X_GPIO_CR, \
+ ( sysRegRead(AR531X_GPIO_CR) & \
+ ~(AR531X_GPIO_CR_M(gpio)) )); \
+ return 0; \
+ } \
+ )
+ DO_AR5315( if (gpio > AR5315_NUM_GPIO) { \
+ return -ENXIO; \
+ } else { \
+ sysRegWrite(AR5315_GPIO_DO, \
+ ( (sysRegRead(AR5315_GPIO_DO) & \
+ ~(1 << gpio)) | \
+ ((value!=0) << gpio)) ); \
+ sysRegWrite(AR5315_GPIO_CR, \
+ sysRegRead(AR5315_GPIO_CR) | \
+ AR5315_GPIO_CR_O(gpio) ); \
+ return 0; \
+ } \
+ )
+ return -ENXIO;
+}
+
+/* Reads the gpio pin. Unchecked function */
+static inline int gpio_get_value(unsigned gpio) {
+ DO_AR5312(return (sysRegRead(AR531X_GPIO_DI) & (1 << gpio));)
+ DO_AR5315(return (sysRegRead(AR5315_GPIO_DI) & (1 << gpio));)
+ return 0;
+}
+
+/* Writes to the gpio pin. Unchecked function */
+static inline void gpio_set_value(unsigned gpio, int value) {
+ DO_AR5312( sysRegWrite(AR531X_GPIO_DO, \
+ ( (sysRegRead(AR531X_GPIO_DO) & \
+ ~(1 << gpio)) | \
+ ((value!=0) << gpio)) ); \
+ )
+ DO_AR5315( sysRegWrite(AR5315_GPIO_DO, \
+ ( (sysRegRead(AR5315_GPIO_DO) & \
+ ~(1 << gpio)) | \
+ ((value!=0) << gpio)) ); \
+ )
+}
+
+static inline int gpio_request(unsigned gpio, const char *label) {
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio) {
+}
+
+/* Returns IRQ to attach for gpio. Unchecked function */
+static inline int gpio_to_irq(unsigned gpio) {
+ return AR531X_GPIO_IRQ(gpio);
+}
+
+/* Returns gpio for IRQ attached. Unchecked function */
+static inline int irq_to_gpio(unsigned irq) {
+ return (irq - (AR531X_GPIO_IRQ(0)));
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#endif
--- /dev/null
+#ifndef __AR531X_RESET_H
+#define __AR531X_RESET_H
+
+void ar531x_disable_reset_button(void);
+
+#endif /* __AR531X_RESET_H */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
--- /dev/null
+
+/*
+ * MTD driver for the SPI Flash Memory support.
+ *
+ * Copyright (c) 2005-2006 Atheros Communications Inc.
+ * Copyright (C) 2006-2007 FON Technology, SL.
+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*===========================================================================
+** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT
+**
+** This module contains the Serial Flash access routines for the Atheros SOC.
+** The Atheros SOC integrates a SPI flash controller that is used to access
+** serial flash parts. The SPI flash controller executes in "Little Endian"
+** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be
+** BYTESWAPPED! The SPI Flash controller hardware by default performs READ
+** ONLY byteswapping when accessed via the SPI Flash Alias memory region
+** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the
+** flash sectors is stored in "Little Endian" format.
+**
+** The spiflash_write() routine performs byteswapping on all write
+** operations.
+**===========================================================================*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/squashfs_fs.h>
+#include <linux/root_dev.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include "spiflash.h"
+
+#ifndef __BIG_ENDIAN
+#error This driver currently only works with big endian CPU.
+#endif
+
+#define MAX_PARTS 32
+
+#define SPIFLASH "spiflash: "
+
+#define MIN(a,b) ((a) < (b) ? (a) : (b))
+
+#define busy_wait(condition, wait) \
+ do { \
+ while (condition) { \
+ spin_unlock_bh(&spidata->mutex); \
+ if (wait > 1) \
+ msleep(wait); \
+ else if ((wait == 1) && need_resched()) \
+ schedule(); \
+ else \
+ udelay(1); \
+ spin_lock_bh(&spidata->mutex); \
+ } \
+ } while (0)
+
+
+static __u32 spiflash_regread32(int reg);
+static void spiflash_regwrite32(int reg, __u32 data);
+static __u32 spiflash_sendcmd (int op, u32 addr);
+
+int __init spiflash_init (void);
+void __exit spiflash_exit (void);
+static int spiflash_probe_chip (void);
+static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr);
+static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf);
+static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf);
+
+/* Flash configuration table */
+struct flashconfig {
+ __u32 byte_cnt;
+ __u32 sector_cnt;
+ __u32 sector_size;
+ __u32 cs_addrmask;
+} flashconfig_tbl[MAX_FLASH] =
+ {
+ { 0, 0, 0, 0},
+ { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0},
+ { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0},
+ { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0},
+ { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0},
+ { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE, 0x0}
+ };
+
+/* Mapping of generic opcodes to STM serial flash opcodes */
+#define SPI_WRITE_ENABLE 0
+#define SPI_WRITE_DISABLE 1
+#define SPI_RD_STATUS 2
+#define SPI_WR_STATUS 3
+#define SPI_RD_DATA 4
+#define SPI_FAST_RD_DATA 5
+#define SPI_PAGE_PROGRAM 6
+#define SPI_SECTOR_ERASE 7
+#define SPI_BULK_ERASE 8
+#define SPI_DEEP_PWRDOWN 9
+#define SPI_RD_SIG 10
+#define SPI_MAX_OPCODES 11
+
+struct opcodes {
+ __u16 code;
+ __s8 tx_cnt;
+ __s8 rx_cnt;
+} stm_opcodes[] = {
+ {STM_OP_WR_ENABLE, 1, 0},
+ {STM_OP_WR_DISABLE, 1, 0},
+ {STM_OP_RD_STATUS, 1, 1},
+ {STM_OP_WR_STATUS, 1, 0},
+ {STM_OP_RD_DATA, 4, 4},
+ {STM_OP_FAST_RD_DATA, 5, 0},
+ {STM_OP_PAGE_PGRM, 8, 0},
+ {STM_OP_SECTOR_ERASE, 4, 0},
+ {STM_OP_BULK_ERASE, 1, 0},
+ {STM_OP_DEEP_PWRDOWN, 1, 0},
+ {STM_OP_RD_SIG, 4, 1},
+};
+
+/* Driver private data structure */
+struct spiflash_data {
+ struct mtd_info *mtd;
+ struct mtd_partition *parsed_parts; /* parsed partitions */
+ void *readaddr; /* memory mapped data for read */
+ void *mmraddr; /* memory mapped register space */
+ wait_queue_head_t wq;
+ spinlock_t mutex;
+ int state;
+};
+enum {
+ FL_READY,
+ FL_READING,
+ FL_ERASING,
+ FL_WRITING
+};
+
+static struct spiflash_data *spidata;
+
+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
+
+/***************************************************************************************************/
+
+static __u32
+spiflash_regread32(int reg)
+{
+ volatile __u32 *data = (__u32 *)(spidata->mmraddr + reg);
+
+ return (*data);
+}
+
+static void
+spiflash_regwrite32(int reg, __u32 data)
+{
+ volatile __u32 *addr = (__u32 *)(spidata->mmraddr + reg);
+
+ *addr = data;
+ return;
+}
+
+
+static __u32
+spiflash_sendcmd (int op, u32 addr)
+{
+ u32 reg;
+ u32 mask;
+ struct opcodes *ptr_opcode;
+
+ ptr_opcode = &stm_opcodes[op];
+ busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
+ spiflash_regwrite32(SPI_FLASH_OPCODE, ((u32) ptr_opcode->code) | (addr << 8));
+
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt |
+ (ptr_opcode->rx_cnt << 4) | SPI_CTL_START;
+
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+ busy_wait(spiflash_regread32(SPI_FLASH_CTL) & SPI_CTL_BUSY, 0);
+
+ if (!ptr_opcode->rx_cnt)
+ return 0;
+
+ reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
+
+ switch (ptr_opcode->rx_cnt) {
+ case 1:
+ mask = 0x000000ff;
+ break;
+ case 2:
+ mask = 0x0000ffff;
+ break;
+ case 3:
+ mask = 0x00ffffff;
+ break;
+ default:
+ mask = 0xffffffff;
+ break;
+ }
+ reg &= mask;
+
+ return reg;
+}
+
+
+
+/* Probe SPI flash device
+ * Function returns 0 for failure.
+ * and flashconfig_tbl array index for success.
+ */
+static int
+spiflash_probe_chip (void)
+{
+ __u32 sig;
+ int flash_size;
+
+ /* Read the signature on the flash device */
+ spin_lock_bh(&spidata->mutex);
+ sig = spiflash_sendcmd(SPI_RD_SIG, 0);
+ spin_unlock_bh(&spidata->mutex);
+
+ switch (sig) {
+ case STM_8MBIT_SIGNATURE:
+ flash_size = FLASH_1MB;
+ break;
+ case STM_16MBIT_SIGNATURE:
+ flash_size = FLASH_2MB;
+ break;
+ case STM_32MBIT_SIGNATURE:
+ flash_size = FLASH_4MB;
+ break;
+ case STM_64MBIT_SIGNATURE:
+ flash_size = FLASH_8MB;
+ break;
+ case STM_128MBIT_SIGNATURE:
+ flash_size = FLASH_16MB;
+ break;
+ default:
+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
+ return (0);
+ }
+
+ return (flash_size);
+}
+
+
+/* wait until the flash chip is ready and grab a lock */
+static int spiflash_wait_ready(int state)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+retry:
+ spin_lock_bh(&spidata->mutex);
+ if (spidata->state != FL_READY) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&spidata->wq, &wait);
+ spin_unlock_bh(&spidata->mutex);
+ schedule();
+ remove_wait_queue(&spidata->wq, &wait);
+
+ if(signal_pending(current))
+ return 0;
+
+ goto retry;
+ }
+ spidata->state = state;
+
+ return 1;
+}
+
+static inline void spiflash_done(void)
+{
+ spidata->state = FL_READY;
+ spin_unlock_bh(&spidata->mutex);
+ wake_up(&spidata->wq);
+}
+
+static int
+spiflash_erase (struct mtd_info *mtd,struct erase_info *instr)
+{
+ struct opcodes *ptr_opcode;
+ u32 temp, reg;
+
+ /* sanity checks */
+ if (instr->addr + instr->len > mtd->size) return (-EINVAL);
+
+ if (!spiflash_wait_ready(FL_ERASING))
+ return -EINTR;
+
+ spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
+ busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+
+ ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE];
+ temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code);
+ spiflash_regwrite32(SPI_FLASH_OPCODE, temp);
+
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START;
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+ /* this will take some time */
+ spin_unlock_bh(&spidata->mutex);
+ msleep(800);
+ spin_lock_bh(&spidata->mutex);
+
+ busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 20);
+ spiflash_done();
+
+ instr->state = MTD_ERASE_DONE;
+ if (instr->callback) instr->callback (instr);
+
+ return 0;
+}
+
+static int
+spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf)
+{
+ u8 *read_addr;
+
+ /* sanity checks */
+ if (!len) return (0);
+ if (from + len > mtd->size) return (-EINVAL);
+
+ /* we always read len bytes */
+ *retlen = len;
+
+ if (!spiflash_wait_ready(FL_READING))
+ return -EINTR;
+ read_addr = (u8 *)(spidata->readaddr + from);
+ memcpy(buf, read_addr, len);
+ spiflash_done();
+
+ return 0;
+}
+
+static int
+spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
+{
+ u32 opcode, bytes_left;
+
+ *retlen = 0;
+
+ /* sanity checks */
+ if (!len) return (0);
+ if (to + len > mtd->size) return (-EINVAL);
+
+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code;
+ bytes_left = len;
+
+ do {
+ u32 xact_len, reg, page_offset, spi_data = 0;
+
+ xact_len = MIN(bytes_left, sizeof(__u32));
+
+ /* 32-bit writes cannot span across a page boundary
+ * (256 bytes). This types of writes require two page
+ * program operations to handle it correctly. The STM part
+ * will write the overflow data to the beginning of the
+ * current page as opposed to the subsequent page.
+ */
+ page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len;
+
+ if (page_offset > STM_PAGE_SIZE) {
+ xact_len -= (page_offset - STM_PAGE_SIZE);
+ }
+
+ if (!spiflash_wait_ready(FL_WRITING))
+ return -EINTR;
+
+ spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
+ switch (xact_len) {
+ case 1:
+ spi_data = (u32) ((u8) *buf);
+ break;
+ case 2:
+ spi_data = (buf[1] << 8) | buf[0];
+ break;
+ case 3:
+ spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0];
+ break;
+ case 4:
+ spi_data = (buf[3] << 24) | (buf[2] << 16) |
+ (buf[1] << 8) | buf[0];
+ break;
+ default:
+ spi_data = 0;
+ break;
+ }
+
+ spiflash_regwrite32(SPI_FLASH_DATA, spi_data);
+ opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8);
+ spiflash_regwrite32(SPI_FLASH_OPCODE, opcode);
+
+ reg = spiflash_regread32(SPI_FLASH_CTL);
+ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START;
+ spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+ /* give the chip some time before we start busy waiting */
+ spin_unlock_bh(&spidata->mutex);
+ schedule();
+ spin_lock_bh(&spidata->mutex);
+
+ busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 0);
+ spiflash_done();
+
+ bytes_left -= xact_len;
+ to += xact_len;
+ buf += xact_len;
+
+ *retlen += xact_len;
+ } while (bytes_left != 0);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
+#endif
+
+
+static int spiflash_probe(struct platform_device *pdev)
+{
+ int result = -1;
+ int index, num_parts;
+ struct mtd_info *mtd;
+
+ spidata->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
+ spin_lock_init(&spidata->mutex);
+ init_waitqueue_head(&spidata->wq);
+ spidata->state = FL_READY;
+
+ if (!spidata->mmraddr) {
+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
+ kfree(spidata);
+ spidata = NULL;
+ }
+
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd) {
+ kfree(spidata);
+ return -ENXIO;
+ }
+
+ if (!(index = spiflash_probe_chip())) {
+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
+ goto error;
+ }
+
+ spidata->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
+ if (!spidata->readaddr) {
+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
+ goto error;
+ }
+
+ mtd->name = "spiflash";
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
+ mtd->size = flashconfig_tbl[index].byte_cnt;
+ mtd->erasesize = flashconfig_tbl[index].sector_size;
+ mtd->writesize = 1;
+ mtd->numeraseregions = 0;
+ mtd->eraseregions = NULL;
+ mtd->erase = spiflash_erase;
+ mtd->read = spiflash_read;
+ mtd->write = spiflash_write;
+ mtd->owner = THIS_MODULE;
+
+ /* parse redboot partitions */
+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0);
+ if (!num_parts)
+ goto error;
+
+ result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts);
+ spidata->mtd = mtd;
+
+ return (result);
+
+error:
+ kfree(mtd);
+ kfree(spidata);
+ return -ENXIO;
+}
+
+static int spiflash_remove (struct platform_device *pdev)
+{
+ del_mtd_partitions (spidata->mtd);
+ kfree(spidata->mtd);
+ return 0;
+}
+
+struct platform_driver spiflash_driver = {
+ .driver.name = "spiflash",
+ .probe = spiflash_probe,
+ .remove = spiflash_remove,
+};
+
+int __init
+spiflash_init (void)
+{
+ spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL);
+ if (!spidata)
+ return (-ENXIO);
+
+ spin_lock_init(&spidata->mutex);
+ platform_driver_register(&spiflash_driver);
+
+ return 0;
+}
+
+void __exit
+spiflash_exit (void)
+{
+ kfree(spidata);
+}
+
+module_init (spiflash_init);
+module_exit (spiflash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
+
--- /dev/null
+/*
+ * SPI Flash Memory support header file.
+ *
+ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $
+ *
+ *
+ * Copyright (c) 2005, Atheros Communications Inc.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#define FLASH_1MB 1
+#define FLASH_2MB 2
+#define FLASH_4MB 3
+#define FLASH_8MB 4
+#define FLASH_16MB 5
+#define MAX_FLASH 6
+
+#define STM_PAGE_SIZE 256
+
+#define SFI_WRITE_BUFFER_SIZE 4
+#define SFI_FLASH_ADDR_MASK 0x00ffffff
+
+#define STM_8MBIT_SIGNATURE 0x13
+#define STM_M25P80_BYTE_COUNT 1048576
+#define STM_M25P80_SECTOR_COUNT 16
+#define STM_M25P80_SECTOR_SIZE 0x10000
+
+#define STM_16MBIT_SIGNATURE 0x14
+#define STM_M25P16_BYTE_COUNT 2097152
+#define STM_M25P16_SECTOR_COUNT 32
+#define STM_M25P16_SECTOR_SIZE 0x10000
+
+#define STM_32MBIT_SIGNATURE 0x15
+#define STM_M25P32_BYTE_COUNT 4194304
+#define STM_M25P32_SECTOR_COUNT 64
+#define STM_M25P32_SECTOR_SIZE 0x10000
+
+#define STM_64MBIT_SIGNATURE 0x16
+#define STM_M25P64_BYTE_COUNT 8388608
+#define STM_M25P64_SECTOR_COUNT 128
+#define STM_M25P64_SECTOR_SIZE 0x10000
+
+#define STM_128MBIT_SIGNATURE 0x17
+#define STM_M25P128_BYTE_COUNT 16777216
+#define STM_M25P128_SECTOR_COUNT 256
+#define STM_M25P128_SECTOR_SIZE 0x10000
+
+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
+
+/*
+ * ST Microelectronics Opcodes for Serial Flash
+ */
+
+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
+#define STM_OP_RD_STATUS 0x05 /* Read Status */
+#define STM_OP_WR_STATUS 0x01 /* Write Status */
+#define STM_OP_RD_DATA 0x03 /* Read Data */
+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
+
+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
+
+/*
+ * SPI Flash Interface Registers
+ */
+#define AR531XPLUS_SPI_READ 0x08000000
+#define AR531XPLUS_SPI_MMR 0x11300000
+#define AR531XPLUS_SPI_MMR_SIZE 12
+
+#define AR531XPLUS_SPI_CTL 0x00
+#define AR531XPLUS_SPI_OPCODE 0x04
+#define AR531XPLUS_SPI_DATA 0x08
+
+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
+
+#define SPI_CTL_START 0x00000100
+#define SPI_CTL_BUSY 0x00010000
+#define SPI_CTL_TXCNT_MASK 0x0000000f
+#define SPI_CTL_RXCNT_MASK 0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
+#define SPI_CTL_SIZE_MASK 0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK 0x03000000
+#define SPI_OPCODE_MASK 0x000000ff
+
+#define SPI_STATUS_WIP STM_STATUS_WIP
--- /dev/null
+#
+# Makefile for the AR2313 ethernet driver
+#
+
+obj-$(CONFIG_AR2313) += ar2313.o
--- /dev/null
+/*
+ * ar2313.c: Linux driver for the Atheros AR231x Ethernet device.
+ *
+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Thanks to Atheros for providing hardware and documentation
+ * enabling me to write this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Additional credits:
+ * This code is taken from John Taylor's Sibyte driver and then
+ * modified for the AR2313.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/sockios.h>
+#include <linux/pkt_sched.h>
+#include <linux/compile.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/ethtool.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+
+#include <net/sock.h>
+#include <net/ip.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/bootinfo.h>
+
+#define AR2313_MTU 1692
+#define AR2313_PRIOS 1
+#define AR2313_QUEUES (2*AR2313_PRIOS)
+#define AR2313_DESCR_ENTRIES 64
+
+#undef INDEX_DEBUG
+#define DEBUG 0
+#define DEBUG_TX 0
+#define DEBUG_RX 0
+#define DEBUG_INT 0
+#define DEBUG_MC 0
+#define DEBUG_ERR 1
+
+#ifndef min
+#define min(a,b) (((a)<(b))?(a):(b))
+#endif
+
+#ifndef SMP_CACHE_BYTES
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#endif
+
+#define AR2313_MBOX_SET_BIT 0x8
+
+#define BOARD_IDX_STATIC 0
+#define BOARD_IDX_OVERFLOW -1
+
+#include "dma.h"
+#include "ar2313.h"
+
+/*
+ * New interrupt handler strategy:
+ *
+ * An old interrupt handler worked using the traditional method of
+ * replacing an skbuff with a new one when a packet arrives. However
+ * the rx rings do not need to contain a static number of buffer
+ * descriptors, thus it makes sense to move the memory allocation out
+ * of the main interrupt handler and do it in a bottom half handler
+ * and only allocate new buffers when the number of buffers in the
+ * ring is below a certain threshold. In order to avoid starving the
+ * NIC under heavy load it is however necessary to force allocation
+ * when hitting a minimum threshold. The strategy for alloction is as
+ * follows:
+ *
+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
+ * the buffers in the interrupt handler
+ * RX_RING_THRES - maximum number of buffers in the rx ring
+ *
+ * One advantagous side effect of this allocation approach is that the
+ * entire rx processing can be done without holding any spin lock
+ * since the rx rings and registers are totally independent of the tx
+ * ring and its registers. This of course includes the kmalloc's of
+ * new skb's. Thus start_xmit can run in parallel with rx processing
+ * and the memory allocation on SMP systems.
+ *
+ * Note that running the skb reallocation in a bottom half opens up
+ * another can of races which needs to be handled properly. In
+ * particular it can happen that the interrupt handler tries to run
+ * the reallocation while the bottom half is either running on another
+ * CPU or was interrupted on the same CPU. To get around this the
+ * driver uses bitops to prevent the reallocation routines from being
+ * reentered.
+ *
+ * TX handling can also be done without holding any spin lock, wheee
+ * this is fun! since tx_csm is only written to by the interrupt
+ * handler.
+ */
+
+/*
+ * Threshold values for RX buffer allocation - the low water marks for
+ * when to start refilling the rings are set to 75% of the ring
+ * sizes. It seems to make sense to refill the rings entirely from the
+ * intrrupt handler once it gets below the panic threshold, that way
+ * we don't risk that the refilling is moved to another CPU when the
+ * one running the interrupt handler just got the slab code hot in its
+ * cache.
+ */
+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
+#define RX_PANIC_THRES (RX_RING_SIZE/4)
+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
+#define CRC_LEN 4
+#define RX_OFFSET 2
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define VLAN_HDR 4
+#else
+#define VLAN_HDR 0
+#endif
+
+#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
+
+#ifdef MODULE
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
+MODULE_DESCRIPTION("AR2313 Ethernet driver");
+#endif
+
+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
+
+// prototypes
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+static void ar2313_halt(struct net_device *dev);
+static void rx_tasklet_func(unsigned long data);
+static void rx_tasklet_cleanup(struct net_device *dev);
+static void ar2313_multicast_list(struct net_device *dev);
+
+static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
+static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
+static int mdiobus_reset(struct mii_bus *bus);
+static int mdiobus_probe (struct net_device *dev);
+static void ar2313_adjust_link(struct net_device *dev);
+
+#ifndef ERR
+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+#endif
+
+
+int __init ar2313_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct ar2313_private *sp;
+ struct resource *res;
+ unsigned long ar_eth_base;
+ char buf[64];
+
+ dev = alloc_etherdev(sizeof(struct ar2313_private));
+
+ if (dev == NULL) {
+ printk(KERN_ERR
+ "ar2313: Unable to allocate net_device structure!\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ sp = netdev_priv(dev);
+ sp->dev = dev;
+ sp->cfg = pdev->dev.platform_data;
+
+ sprintf(buf, "eth%d_membase", pdev->id);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
+ if (!res)
+ return -ENODEV;
+
+ sp->link = 0;
+ ar_eth_base = res->start;
+ sp->phy = sp->cfg->phy;
+
+ sprintf(buf, "eth%d_irq", pdev->id);
+ dev->irq = platform_get_irq_byname(pdev, buf);
+
+ spin_lock_init(&sp->lock);
+
+ /* initialize func pointers */
+ dev->open = &ar2313_open;
+ dev->stop = &ar2313_close;
+ dev->hard_start_xmit = &ar2313_start_xmit;
+
+ dev->set_multicast_list = &ar2313_multicast_list;
+#ifdef TX_TIMEOUT
+ dev->tx_timeout = ar2313_tx_timeout;
+ dev->watchdog_timeo = AR2313_TX_TIMEOUT;
+#endif
+ dev->do_ioctl = &ar2313_ioctl;
+
+ // SAMEER: do we need this?
+ dev->features |= NETIF_F_HIGHDMA;
+
+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
+ tasklet_disable(&sp->rx_tasklet);
+
+ sp->eth_regs =
+ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
+ if (!sp->eth_regs) {
+ printk("Can't remap eth registers\n");
+ return (-ENXIO);
+ }
+
+ /*
+ * When there's only one MAC, PHY regs are typically on ENET0,
+ * even though the MAC might be on ENET1.
+ * Needto remap PHY regs separately in this case
+ */
+ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
+ sp->phy_regs = sp->eth_regs;
+ else {
+ sp->phy_regs =
+ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
+ sizeof(*sp->phy_regs));
+ if (!sp->phy_regs) {
+ printk("Can't remap phy registers\n");
+ return (-ENXIO);
+ }
+ }
+
+ sp->dma_regs =
+ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
+ sizeof(*sp->dma_regs));
+ dev->base_addr = (unsigned int) sp->dma_regs;
+ if (!sp->dma_regs) {
+ printk("Can't remap DMA registers\n");
+ return (-ENXIO);
+ }
+
+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
+ if (!sp->int_regs) {
+ printk("Can't remap INTERRUPT registers\n");
+ return (-ENXIO);
+ }
+
+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
+ sp->name[sizeof(sp->name) - 1] = '\0';
+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
+ sp->board_idx = BOARD_IDX_STATIC;
+
+ if (ar2313_init(dev)) {
+ /*
+ * ar2313_init() calls ar2313_init_cleanup() on error.
+ */
+ kfree(dev);
+ return -ENODEV;
+ }
+
+ if (register_netdev(dev)) {
+ printk("%s: register_netdev failed\n", __func__);
+ return -1;
+ }
+
+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
+ dev->name, sp->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
+
+ sp->mii_bus.priv = dev;
+ sp->mii_bus.read = mdiobus_read;
+ sp->mii_bus.write = mdiobus_write;
+ sp->mii_bus.reset = mdiobus_reset;
+ sp->mii_bus.name = "ar2313_eth_mii";
+ sp->mii_bus.id = 0;
+ sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
+ *sp->mii_bus.irq = PHY_POLL;
+
+ mdiobus_register(&sp->mii_bus);
+
+ if (mdiobus_probe(dev) != 0) {
+ printk(KERN_ERR "ar2313: mdiobus_probe failed");
+ rx_tasklet_cleanup(dev);
+ ar2313_init_cleanup(dev);
+ unregister_netdev(dev);
+ kfree(dev);
+ } else {
+ /* start link poll timer */
+ ar2313_setup_timer(dev);
+ }
+
+ return 0;
+}
+
+#if 0
+static void ar2313_dump_regs(struct net_device *dev)
+{
+ unsigned int *ptr, i;
+ struct ar2313_private *sp = netdev_priv(dev);
+
+ ptr = (unsigned int *) sp->eth_regs;
+ for (i = 0; i < (sizeof(ETHERNET_STRUCT) / sizeof(unsigned int));
+ i++, ptr++) {
+ printk("ENET: %08x = %08x\n", (int) ptr, *ptr);
+ }
+
+ ptr = (unsigned int *) sp->dma_regs;
+ for (i = 0; i < (sizeof(DMA) / sizeof(unsigned int)); i++, ptr++) {
+ printk("DMA: %08x = %08x\n", (int) ptr, *ptr);
+ }
+
+ ptr = (unsigned int *) sp->int_regs;
+ for (i = 0; i < (sizeof(INTERRUPT) / sizeof(unsigned int)); i++, ptr++) {
+ printk("INT: %08x = %08x\n", (int) ptr, *ptr);
+ }
+
+ for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
+ ar2313_descr_t *td = &sp->tx_ring[i];
+ printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
+ td->status, td->devcs, td->addr, td->descr);
+ }
+}
+#endif
+
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ unsigned long flags;
+
+#if DEBUG_TX
+ printk("Tx timeout\n");
+#endif
+ spin_lock_irqsave(&sp->lock, flags);
+ ar2313_restart(dev);
+ spin_unlock_irqrestore(&sp->lock, flags);
+}
+#endif
+
+#if DEBUG_MC
+static void printMcList(struct net_device *dev)
+{
+ struct dev_mc_list *list = dev->mc_list;
+ int num = 0, i;
+ while (list) {
+ printk("%d MC ADDR ", num);
+ for (i = 0; i < list->dmi_addrlen; i++) {
+ printk(":%02x", list->dmi_addr[i]);
+ }
+ list = list->next;
+ printk("\n");
+ }
+}
+#endif
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * THIS IS ABSOLUTE CRAP, disabled
+ */
+static void ar2313_multicast_list(struct net_device *dev)
+{
+ /*
+ * Always listen to broadcasts and
+ * treat IFF bits independently
+ */
+ struct ar2313_private *sp = netdev_priv(dev);
+ unsigned int recognise;
+
+ recognise = sp->eth_regs->mac_control;
+
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ recognise |= MAC_CONTROL_PR;
+ } else {
+ recognise &= ~MAC_CONTROL_PR;
+ }
+
+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
+#if DEBUG_MC
+ printMcList(dev);
+ printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__,
+ dev->mc_count);
+#endif
+ recognise |= MAC_CONTROL_PM; /* all multicast */
+ } else if (dev->mc_count > 0) {
+#if DEBUG_MC
+ printMcList(dev);
+ printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
+#endif
+ recognise |= MAC_CONTROL_PM; /* for the time being */
+ }
+#if DEBUG_MC
+ printk("%s: setting %08x to %08x\n", __FUNCTION__, (int) sp->eth_regs,
+ recognise);
+#endif
+
+ sp->eth_regs->mac_control = recognise;
+}
+
+static void rx_tasklet_cleanup(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+
+ /*
+ * Tasklet may be scheduled. Need to get it removed from the list
+ * since we're about to free the struct.
+ */
+
+ sp->unloading = 1;
+ tasklet_enable(&sp->rx_tasklet);
+ tasklet_kill(&sp->rx_tasklet);
+}
+
+static int __exit ar2313_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ rx_tasklet_cleanup(dev);
+ ar2313_init_cleanup(dev);
+ unregister_netdev(dev);
+ kfree(dev);
+ return 0;
+}
+
+
+/*
+ * Restart the AR2313 ethernet controller.
+ */
+static int ar2313_restart(struct net_device *dev)
+{
+ /* disable interrupts */
+ disable_irq(dev->irq);
+
+ /* stop mac */
+ ar2313_halt(dev);
+
+ /* initialize */
+ ar2313_init(dev);
+
+ /* enable interrupts */
+ enable_irq(dev->irq);
+
+ return 0;
+}
+
+static struct platform_driver ar2313_driver = {
+ .driver.name = "ar531x-eth",
+ .probe = ar2313_probe,
+ .remove = ar2313_remove,
+};
+
+int __init ar2313_module_init(void)
+{
+ return platform_driver_register(&ar2313_driver);
+}
+
+void __exit ar2313_module_cleanup(void)
+{
+ platform_driver_unregister(&ar2313_driver);
+}
+
+module_init(ar2313_module_init);
+module_exit(ar2313_module_cleanup);
+
+
+static void ar2313_free_descriptors(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ if (sp->rx_ring != NULL) {
+ kfree((void *) KSEG0ADDR(sp->rx_ring));
+ sp->rx_ring = NULL;
+ sp->tx_ring = NULL;
+ }
+}
+
+
+static int ar2313_allocate_descriptors(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ int size;
+ int j;
+ ar2313_descr_t *space;
+
+ if (sp->rx_ring != NULL) {
+ printk("%s: already done.\n", __FUNCTION__);
+ return 0;
+ }
+
+ size =
+ (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
+ space = kmalloc(size, GFP_KERNEL);
+ if (space == NULL)
+ return 1;
+
+ /* invalidate caches */
+ dma_cache_inv((unsigned int) space, size);
+
+ /* now convert pointer to KSEG1 */
+ space = (ar2313_descr_t *) KSEG1ADDR(space);
+
+ memset((void *) space, 0, size);
+
+ sp->rx_ring = space;
+ space += AR2313_DESCR_ENTRIES;
+
+ sp->tx_ring = space;
+ space += AR2313_DESCR_ENTRIES;
+
+ /* Initialize the transmit Descriptors */
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ ar2313_descr_t *td = &sp->tx_ring[j];
+ td->status = 0;
+ td->devcs = DMA_TX1_CHAINED;
+ td->addr = 0;
+ td->descr =
+ virt_to_phys(&sp->
+ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
+ }
+
+ return 0;
+}
+
+
+/*
+ * Generic cleanup handling data allocated during init. Used when the
+ * module is unloaded or if an error occurs during initialization
+ */
+static void ar2313_init_cleanup(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ struct sk_buff *skb;
+ int j;
+
+ ar2313_free_descriptors(dev);
+
+ if (sp->eth_regs)
+ iounmap((void *) sp->eth_regs);
+ if (sp->dma_regs)
+ iounmap((void *) sp->dma_regs);
+
+ if (sp->rx_skb) {
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ skb = sp->rx_skb[j];
+ if (skb) {
+ sp->rx_skb[j] = NULL;
+ dev_kfree_skb(skb);
+ }
+ }
+ kfree(sp->rx_skb);
+ sp->rx_skb = NULL;
+ }
+
+ if (sp->tx_skb) {
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ skb = sp->tx_skb[j];
+ if (skb) {
+ sp->tx_skb[j] = NULL;
+ dev_kfree_skb(skb);
+ }
+ }
+ kfree(sp->tx_skb);
+ sp->tx_skb = NULL;
+ }
+}
+
+static int ar2313_setup_timer(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+
+ init_timer(&sp->link_timer);
+
+ sp->link_timer.function = ar2313_link_timer_fn;
+ sp->link_timer.data = (int) dev;
+ sp->link_timer.expires = jiffies + HZ;
+
+ add_timer(&sp->link_timer);
+ return 0;
+
+}
+
+static void ar2313_link_timer_fn(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ar2313_private *sp = netdev_priv(dev);
+
+ // see if the link status changed
+ // This was needed to make sure we set the PHY to the
+ // autonegotiated value of half or full duplex.
+ ar2313_check_link(dev);
+
+ // Loop faster when we don't have link.
+ // This was needed to speed up the AP bootstrap time.
+ if (sp->link == 0) {
+ mod_timer(&sp->link_timer, jiffies + HZ / 2);
+ } else {
+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
+ }
+}
+
+static void ar2313_check_link(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ u16 phyData;
+
+ phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR);
+ if (sp->phyData != phyData) {
+ if (phyData & BMSR_LSTATUS) {
+ /* link is present, ready link partner ability to deterine
+ duplexity */
+ int duplex = 0;
+ u16 reg;
+
+ sp->link = 1;
+ reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR);
+ if (reg & BMCR_ANENABLE) {
+ /* auto neg enabled */
+ reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA);
+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
+ } else {
+ /* no auto neg, just read duplex config */
+ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
+ }
+
+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
+ dev->name, (duplex) ? "full" : "half");
+
+ if (duplex) {
+ /* full duplex */
+ sp->eth_regs->mac_control =
+ ((sp->eth_regs->
+ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
+ } else {
+ /* half duplex */
+ sp->eth_regs->mac_control =
+ ((sp->eth_regs->
+ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
+ }
+ } else {
+ /* no link */
+ sp->link = 0;
+ }
+ sp->phyData = phyData;
+ }
+}
+
+static int ar2313_reset_reg(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ unsigned int ethsal, ethsah;
+ unsigned int flags;
+
+ *sp->int_regs |= sp->cfg->reset_mac;
+ mdelay(10);
+ *sp->int_regs &= ~sp->cfg->reset_mac;
+ mdelay(10);
+ *sp->int_regs |= sp->cfg->reset_phy;
+ mdelay(10);
+ *sp->int_regs &= ~sp->cfg->reset_phy;
+ mdelay(10);
+
+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
+ mdelay(10);
+ sp->dma_regs->bus_mode =
+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
+
+ /* enable interrupts */
+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
+ DMA_STATUS_NIS |
+ DMA_STATUS_RI |
+ DMA_STATUS_TI | DMA_STATUS_FBE);
+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
+ sp->dma_regs->control =
+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
+
+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
+ sp->eth_regs->vlan_tag = (0x8100);
+
+ /* Enable Ethernet Interface */
+ flags = (MAC_CONTROL_TE | /* transmit enable */
+ MAC_CONTROL_PM | /* pass mcast */
+ MAC_CONTROL_F | /* full duplex */
+ MAC_CONTROL_HBD); /* heart beat disabled */
+
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ flags |= MAC_CONTROL_PR;
+ }
+ sp->eth_regs->mac_control = flags;
+
+ /* Set all Ethernet station address registers to their initial values */
+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
+
+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
+
+ sp->eth_regs->mac_addr[0] = ethsah;
+ sp->eth_regs->mac_addr[1] = ethsal;
+
+ mdelay(10);
+
+ return (0);
+}
+
+
+static int ar2313_init(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ int ecode = 0;
+
+ /*
+ * Allocate descriptors
+ */
+ if (ar2313_allocate_descriptors(dev)) {
+ printk("%s: %s: ar2313_allocate_descriptors failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+
+ /*
+ * Get the memory for the skb rings.
+ */
+ if (sp->rx_skb == NULL) {
+ sp->rx_skb =
+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
+ GFP_KERNEL);
+ if (!(sp->rx_skb)) {
+ printk("%s: %s: rx_skb kmalloc failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+ }
+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+ if (sp->tx_skb == NULL) {
+ sp->tx_skb =
+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
+ GFP_KERNEL);
+ if (!(sp->tx_skb)) {
+ printk("%s: %s: tx_skb kmalloc failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+ }
+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+ /*
+ * Set tx_csm before we start receiving interrupts, otherwise
+ * the interrupt handler might think it is supposed to process
+ * tx ints before we are up and running, which may cause a null
+ * pointer access in the int handler.
+ */
+ sp->rx_skbprd = 0;
+ sp->cur_rx = 0;
+ sp->tx_prd = 0;
+ sp->tx_csm = 0;
+
+ /*
+ * Zero the stats before starting the interface
+ */
+ memset(&dev->stats, 0, sizeof(dev->stats));
+
+ /*
+ * We load the ring here as there seem to be no way to tell the
+ * firmware to wipe the ring without re-initializing it.
+ */
+ ar2313_load_rx_ring(dev, RX_RING_SIZE);
+
+ /*
+ * Init hardware
+ */
+ ar2313_reset_reg(dev);
+
+ /*
+ * Get the IRQ
+ */
+ ecode =
+ request_irq(dev->irq, &ar2313_interrupt,
+ IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+ dev->name, dev);
+ if (ecode) {
+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
+ dev->name, __FUNCTION__, dev->irq);
+ goto init_error;
+ }
+
+
+ tasklet_enable(&sp->rx_tasklet);
+
+ return 0;
+
+ init_error:
+ ar2313_init_cleanup(dev);
+ return ecode;
+}
+
+/*
+ * Load the rx ring.
+ *
+ * Loading rings is safe without holding the spin lock since this is
+ * done only before the device is enabled, thus no interrupts are
+ * generated and by the interrupt handler/tasklet handler.
+ */
+static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
+{
+
+ struct ar2313_private *sp = netdev_priv(dev);
+ short i, idx;
+
+ idx = sp->rx_skbprd;
+
+ for (i = 0; i < nr_bufs; i++) {
+ struct sk_buff *skb;
+ ar2313_descr_t *rd;
+
+ if (sp->rx_skb[idx]) {
+#if DEBUG_RX
+ printk(KERN_INFO "ar2313 rx refill full\n");
+#endif /* DEBUG */
+ break;
+ }
+ // partha: create additional room for the second GRE fragment
+ skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC);
+ if (!skb) {
+ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
+ __FUNCTION__);
+ break;
+ }
+ // partha: create additional room in the front for tx pkt capture
+ skb_reserve(skb, 32);
+
+ /*
+ * Make sure IP header starts on a fresh cache line.
+ */
+ skb->dev = dev;
+ skb_reserve(skb, RX_OFFSET);
+ sp->rx_skb[idx] = skb;
+
+ rd = (ar2313_descr_t *) & sp->rx_ring[idx];
+
+ /* initialize dma descriptor */
+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+ rd->addr = virt_to_phys(skb->data);
+ rd->descr =
+ virt_to_phys(&sp->
+ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
+ rd->status = DMA_RX_OWN;
+
+ idx = DSC_NEXT(idx);
+ }
+
+ if (!i) {
+#if DEBUG_ERR
+ printk(KERN_INFO
+ "Out of memory when allocating standard receive buffers\n");
+#endif /* DEBUG */
+ } else {
+ sp->rx_skbprd = idx;
+ }
+
+ return;
+}
+
+#define AR2313_MAX_PKTS_PER_CALL 64
+
+static int ar2313_rx_int(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ struct sk_buff *skb, *skb_new;
+ ar2313_descr_t *rxdesc;
+ unsigned int status;
+ u32 idx;
+ int pkts = 0;
+ int rval;
+
+ idx = sp->cur_rx;
+
+ /* process at most the entire ring and then wait for another interrupt
+ */
+ while (1) {
+
+ rxdesc = &sp->rx_ring[idx];
+ status = rxdesc->status;
+ if (status & DMA_RX_OWN) {
+ /* SiByte owns descriptor or descr not yet filled in */
+ rval = 0;
+ break;
+ }
+
+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
+ rval = 1;
+ break;
+ }
+#if DEBUG_RX
+ printk("index %d\n", idx);
+ printk("RX status %08x\n", rxdesc->status);
+ printk("RX devcs %08x\n", rxdesc->devcs);
+ printk("RX addr %08x\n", rxdesc->addr);
+ printk("RX descr %08x\n", rxdesc->descr);
+#endif
+
+ if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) &&
+ (!(status & DMA_RX_LONG))) {
+#if DEBUG_RX
+ printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
+#endif
+ dev->stats.rx_errors++;
+ dev->stats.rx_dropped++;
+
+ /* add statistics counters */
+ if (status & DMA_RX_ERR_CRC)
+ dev->stats.rx_crc_errors++;
+ if (status & DMA_RX_ERR_COL)
+ dev->stats.rx_over_errors++;
+ if (status & DMA_RX_ERR_LENGTH)
+ dev->stats.rx_length_errors++;
+ if (status & DMA_RX_ERR_RUNT)
+ dev->stats.rx_over_errors++;
+ if (status & DMA_RX_ERR_DESC)
+ dev->stats.rx_over_errors++;
+
+ } else {
+ /* alloc new buffer. */
+ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
+ if (skb_new != NULL) {
+
+ skb = sp->rx_skb[idx];
+ /* set skb */
+ skb_put(skb,
+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+
+ dev->stats.rx_bytes += skb->len;
+ skb->protocol = eth_type_trans(skb, dev);
+ /* pass the packet to upper layers */
+ netif_rx(skb);
+
+ skb_new->dev = dev;
+ /* 16 bit align */
+ skb_reserve(skb_new, RX_OFFSET + 32);
+ /* reset descriptor's curr_addr */
+ rxdesc->addr = virt_to_phys(skb_new->data);
+
+ dev->stats.rx_packets++;
+ sp->rx_skb[idx] = skb_new;
+ } else {
+ dev->stats.rx_dropped++;
+ }
+ }
+
+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+ rxdesc->status = DMA_RX_OWN;
+
+ idx = DSC_NEXT(idx);
+ }
+
+ sp->cur_rx = idx;
+
+ return rval;
+}
+
+
+static void ar2313_tx_int(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ u32 idx;
+ struct sk_buff *skb;
+ ar2313_descr_t *txdesc;
+ unsigned int status = 0;
+
+ idx = sp->tx_csm;
+
+ while (idx != sp->tx_prd) {
+
+ txdesc = &sp->tx_ring[idx];
+
+#if DEBUG_TX
+ printk
+ ("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
+ dev->name, sp->tx_csm, idx, sp->tx_prd, txdesc->status,
+ txdesc->devcs, txdesc->addr, txdesc->descr);
+#endif /* DEBUG */
+
+ if ((status = txdesc->status) & DMA_TX_OWN) {
+ /* ar2313 dma still owns descr */
+ break;
+ }
+ /* done with this descriptor */
+ dma_unmap_single(NULL, txdesc->addr,
+ txdesc->devcs & DMA_TX1_BSIZE_MASK,
+ DMA_TO_DEVICE);
+ txdesc->status = 0;
+
+ if (status & DMA_TX_ERROR) {
+ dev->stats.tx_errors++;
+ dev->stats.tx_dropped++;
+ if (status & DMA_TX_ERR_UNDER)
+ dev->stats.tx_fifo_errors++;
+ if (status & DMA_TX_ERR_HB)
+ dev->stats.tx_heartbeat_errors++;
+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
+ dev->stats.tx_carrier_errors++;
+ if (status & (DMA_TX_ERR_LATE |
+ DMA_TX_ERR_COL |
+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
+ dev->stats.tx_aborted_errors++;
+ } else {
+ /* transmit OK */
+ dev->stats.tx_packets++;
+ }
+
+ skb = sp->tx_skb[idx];
+ sp->tx_skb[idx] = NULL;
+ idx = DSC_NEXT(idx);
+ dev->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+ }
+
+ sp->tx_csm = idx;
+
+ return;
+}
+
+
+static void rx_tasklet_func(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ar2313_private *sp = netdev_priv(dev);
+
+ if (sp->unloading) {
+ return;
+ }
+
+ if (ar2313_rx_int(dev)) {
+ tasklet_hi_schedule(&sp->rx_tasklet);
+ } else {
+ unsigned long flags;
+ spin_lock_irqsave(&sp->lock, flags);
+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
+}
+
+static void rx_schedule(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+
+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
+
+ tasklet_hi_schedule(&sp->rx_tasklet);
+}
+
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct ar2313_private *sp = netdev_priv(dev);
+ unsigned int status, enabled;
+
+ /* clear interrupt */
+ /*
+ * Don't clear RI bit if currently disabled.
+ */
+ status = sp->dma_regs->status;
+ enabled = sp->dma_regs->intr_ena;
+ sp->dma_regs->status = status & enabled;
+
+ if (status & DMA_STATUS_NIS) {
+ /* normal status */
+ /*
+ * Don't schedule rx processing if interrupt
+ * is already disabled.
+ */
+ if (status & enabled & DMA_STATUS_RI) {
+ /* receive interrupt */
+ rx_schedule(dev);
+ }
+ if (status & DMA_STATUS_TI) {
+ /* transmit interrupt */
+ ar2313_tx_int(dev);
+ }
+ }
+
+ if (status & DMA_STATUS_AIS) {
+#if DEBUG_INT
+ printk("%s: AIS set %08x & %x\n", __FUNCTION__,
+ status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
+#endif
+ /* abnormal status */
+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
+ ar2313_restart(dev);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+
+static int ar2313_open(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ unsigned int ethsal, ethsah;
+
+ /* reset the hardware, in case the MAC address changed */
+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
+
+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
+
+ sp->eth_regs->mac_addr[0] = ethsah;
+ sp->eth_regs->mac_addr[1] = ethsal;
+
+ mdelay(10);
+
+ dev->mtu = 1500;
+ netif_start_queue(dev);
+
+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
+
+ return 0;
+}
+
+static void ar2313_halt(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ int j;
+
+ tasklet_disable(&sp->rx_tasklet);
+
+ /* kill the MAC */
+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
+ MAC_CONTROL_TE); /* disable Transmits */
+ /* stop dma */
+ sp->dma_regs->control = 0;
+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
+
+ /* place phy and MAC in reset */
+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
+
+ /* free buffers on tx ring */
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ struct sk_buff *skb;
+ ar2313_descr_t *txdesc;
+
+ txdesc = &sp->tx_ring[j];
+ txdesc->descr = 0;
+
+ skb = sp->tx_skb[j];
+ if (skb) {
+ dev_kfree_skb(skb);
+ sp->tx_skb[j] = NULL;
+ }
+ }
+}
+
+/*
+ * close should do nothing. Here's why. It's called when
+ * 'ifconfig bond0 down' is run. If it calls free_irq then
+ * the irq is gone forever ! When bond0 is made 'up' again,
+ * the ar2313_open () does not call request_irq (). Worse,
+ * the call to ar2313_halt() generates a WDOG reset due to
+ * the write to 'sp->int_regs' and the box reboots.
+ * Commenting this out is good since it allows the
+ * system to resume when bond0 is made up again.
+ */
+static int ar2313_close(struct net_device *dev)
+{
+#if 0
+ /*
+ * Disable interrupts
+ */
+ disable_irq(dev->irq);
+
+ /*
+ * Without (or before) releasing irq and stopping hardware, this
+ * is an absolute non-sense, by the way. It will be reset instantly
+ * by the first irq.
+ */
+ netif_stop_queue(dev);
+
+ /* stop the MAC and DMA engines */
+ ar2313_halt(dev);
+
+ /* release the interrupt */
+ free_irq(dev->irq, dev);
+
+#endif
+ return 0;
+}
+
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ ar2313_descr_t *td;
+ u32 idx;
+
+ idx = sp->tx_prd;
+ td = &sp->tx_ring[idx];
+
+ if (td->status & DMA_TX_OWN) {
+#if DEBUG_TX
+ printk("%s: No space left to Tx\n", __FUNCTION__);
+#endif
+ /* free skbuf and lie to the caller that we sent it out */
+ dev->stats.tx_dropped++;
+ dev_kfree_skb(skb);
+
+ /* restart transmitter in case locked */
+ sp->dma_regs->xmt_poll = 0;
+ return 0;
+ }
+
+ /* Setup the transmit descriptor. */
+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
+ td->status = DMA_TX_OWN;
+
+ /* kick transmitter last */
+ sp->dma_regs->xmt_poll = 0;
+
+#if DEBUG_TX
+ printk("index %d\n", idx);
+ printk("TX status %08x\n", td->status);
+ printk("TX devcs %08x\n", td->devcs);
+ printk("TX addr %08x\n", td->addr);
+ printk("TX descr %08x\n", td->descr);
+#endif
+
+ sp->tx_skb[idx] = skb;
+ idx = DSC_NEXT(idx);
+ sp->tx_prd = idx;
+
+ return 0;
+}
+
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
+ struct ar2313_private *sp = netdev_priv(dev);
+ int ret;
+
+ switch (cmd) {
+
+ case SIOCETHTOOL:
+ spin_lock_irq(&sp->lock);
+ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
+ spin_unlock_irq(&sp->lock);
+ return ret;
+
+ case SIOCSIFHWADDR:
+ if (copy_from_user
+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ case SIOCGIFHWADDR:
+ if (copy_to_user
+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return phy_mii_ioctl(sp->phy_dev, data, cmd);
+
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static void ar2313_adjust_link(struct net_device *dev)
+{
+ struct ar2313_private *sp = netdev_priv(dev);
+ unsigned int mc;
+
+ if (!sp->phy_dev->link)
+ return;
+
+ if (sp->phy_dev->duplex != sp->oldduplex) {
+ mc = readl(&sp->eth_regs->mac_control);
+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
+ if (sp->phy_dev->duplex)
+ mc |= MAC_CONTROL_F;
+ else
+ mc |= MAC_CONTROL_DRO;
+ writel(mc, &sp->eth_regs->mac_control);
+ sp->oldduplex = sp->phy_dev->duplex;
+ }
+}
+
+#define MII_ADDR(phy, reg) \
+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
+
+static int
+mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
+{
+ struct net_device *const dev = bus->priv;
+ struct ar2313_private *sp = netdev_priv(dev);
+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
+
+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
+ return (ethernet->mii_data >> MII_DATA_SHIFT);
+}
+
+static int
+mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
+ u16 value)
+{
+ struct net_device *const dev = bus->priv;
+ struct ar2313_private *sp = netdev_priv(dev);
+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
+
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
+ ethernet->mii_data = value << MII_DATA_SHIFT;
+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
+
+ return 0;
+}
+
+static int mdiobus_reset(struct mii_bus *bus)
+{
+ struct net_device *const dev = bus->priv;
+
+ ar2313_reset_reg(dev);
+
+ return 0;
+}
+
+static int mdiobus_probe (struct net_device *dev)
+{
+ struct ar2313_private *const sp = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+ int phy_addr;
+
+ /* find the first (lowest address) PHY on the current MAC's MII bus */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
+ if (sp->mii_bus.phy_map[phy_addr]) {
+ phydev = sp->mii_bus.phy_map[phy_addr];
+ break; /* break out with first one found */
+ }
+
+ if (!phydev) {
+ printk (KERN_ERR "ar2313:%s: no PHY found\n", dev->name);
+ return -1;
+ }
+
+ /* now we are supposed to have a proper phydev, to attach to... */
+ BUG_ON(!phydev);
+ BUG_ON(phydev->attached_dev);
+
+ phydev = phy_connect(dev, phydev->dev.bus_id, &ar2313_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+
+ if (IS_ERR(phydev)) {
+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(phydev);
+ }
+
+ /* mask with MAC supported features */
+ phydev->supported &= (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_Autoneg
+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
+ | SUPPORTED_MII
+ | SUPPORTED_TP);
+
+ phydev->advertising = phydev->supported;
+
+ sp->oldduplex = -1;
+ sp->phy_dev = phydev;
+
+ printk(KERN_INFO "%s: attached PHY driver [%s] "
+ "(mii_bus:phy_addr=%s)\n",
+ dev->name, phydev->drv->name, phydev->dev.bus_id);
+
+ return 0;
+}
+
--- /dev/null
+#ifndef _AR2313_H_
+#define _AR2313_H_
+
+#include <linux/autoconf.h>
+#include <asm/bootinfo.h>
+#include <ar531x_platform.h>
+
+/*
+ * probe link timer - 5 secs
+ */
+#define LINK_TIMER (5*HZ)
+
+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
+
+#define AR2313_TX_TIMEOUT (HZ/4)
+
+/*
+ * Rings
+ */
+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
+
+static inline int tx_space(u32 csm, u32 prd)
+{
+ return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
+}
+
+#if MAX_SKB_FRAGS
+#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */
+#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
+#else
+#define tx_ring_full 0
+#endif
+
+#define AR2313_MBGET 2
+#define AR2313_MBSET 3
+#define AR2313_PCI_RECONFIG 4
+#define AR2313_PCI_DUMP 5
+#define AR2313_TEST_PANIC 6
+#define AR2313_TEST_NULLPTR 7
+#define AR2313_READ_DATA 8
+#define AR2313_WRITE_DATA 9
+#define AR2313_GET_VERSION 10
+#define AR2313_TEST_HANG 11
+#define AR2313_SYNC 12
+
+
+//
+// New Combo structure for Both Eth0 AND eth1
+//
+typedef struct {
+ volatile unsigned int mac_control; /* 0x00 */
+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
+ volatile unsigned int mii_addr; /* 0x14 */
+ volatile unsigned int mii_data; /* 0x18 */
+ volatile unsigned int flow_control; /* 0x1c */
+ volatile unsigned int vlan_tag; /* 0x20 */
+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
+
+} ETHERNET_STRUCT;
+
+/********************************************************************
+ * Interrupt controller
+ ********************************************************************/
+
+typedef struct {
+ volatile unsigned int wdog_control; /* 0x08 */
+ volatile unsigned int wdog_timer; /* 0x0c */
+ volatile unsigned int misc_status; /* 0x10 */
+ volatile unsigned int misc_mask; /* 0x14 */
+ volatile unsigned int global_status; /* 0x18 */
+ volatile unsigned int reserved; /* 0x1c */
+ volatile unsigned int reset_control; /* 0x20 */
+} INTERRUPT;
+
+/********************************************************************
+ * DMA controller
+ ********************************************************************/
+typedef struct {
+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
+ volatile unsigned int status; /* 0x14 (CSR5) */
+ volatile unsigned int control; /* 0x18 (CSR6) */
+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
+} DMA;
+
+/*
+ * Struct private for the Sibyte.
+ *
+ * Elements are grouped so variables used by the tx handling goes
+ * together, and will go into the same cache lines etc. in order to
+ * avoid cache line contention between the rx and tx handling on SMP.
+ *
+ * Frequently accessed variables are put at the beginning of the
+ * struct to help the compiler generate better/shorter code.
+ */
+struct ar2313_private {
+ struct net_device *dev;
+ int version;
+ u32 mb[2];
+
+ volatile ETHERNET_STRUCT *phy_regs;
+ volatile ETHERNET_STRUCT *eth_regs;
+ volatile DMA *dma_regs;
+ volatile u32 *int_regs;
+ struct ar531x_eth *cfg;
+
+ spinlock_t lock; /* Serialise access to device */
+
+ /*
+ * RX and TX descriptors, must be adjacent
+ */
+ ar2313_descr_t *rx_ring;
+ ar2313_descr_t *tx_ring;
+
+
+ struct sk_buff **rx_skb;
+ struct sk_buff **tx_skb;
+
+ /*
+ * RX elements
+ */
+ u32 rx_skbprd;
+ u32 cur_rx;
+
+ /*
+ * TX elements
+ */
+ u32 tx_prd;
+ u32 tx_csm;
+
+ /*
+ * Misc elements
+ */
+ int board_idx;
+ char name[48];
+ struct {
+ u32 address;
+ u32 length;
+ char *mapping;
+ } desc;
+
+
+ struct timer_list link_timer;
+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
+ unsigned short mac;
+ unsigned short link; /* 0 - link down, 1 - link up */
+ u16 phyData;
+
+ struct tasklet_struct rx_tasklet;
+ int unloading;
+
+ struct phy_device *phy_dev;
+ struct mii_bus mii_bus;
+ int oldduplex;
+};
+
+
+/*
+ * Prototypes
+ */
+static int ar2313_init(struct net_device *dev);
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+#if 0
+static void ar2313_multicast_list(struct net_device *dev);
+#endif
+static int ar2313_restart(struct net_device *dev);
+#if DEBUG
+static void ar2313_dump_regs(struct net_device *dev);
+#endif
+static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id);
+static int ar2313_open(struct net_device *dev);
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int ar2313_close(struct net_device *dev);
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr,
+ int cmd);
+static void ar2313_init_cleanup(struct net_device *dev);
+static int ar2313_setup_timer(struct net_device *dev);
+static void ar2313_link_timer_fn(unsigned long data);
+static void ar2313_check_link(struct net_device *dev);
+#endif /* _AR2313_H_ */
--- /dev/null
+#ifndef __ARUBA_DMA_H__
+#define __ARUBA_DMA_H__
+
+/*******************************************************************************
+ *
+ * Copyright 2002 Integrated Device Technology, Inc.
+ * All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date : 20011005
+ * Update :
+ * $Log: dma.h,v $
+ * Revision 1.3 2002/06/06 18:34:03 astichte
+ * Added XXX_PhysicalAddress and XXX_VirtualAddress
+ *
+ * Revision 1.2 2002/06/05 18:30:46 astichte
+ * Removed IDTField
+ *
+ * Revision 1.1 2002/05/29 17:33:21 sysarch
+ * jba File moved from vcode/include/idt/acacia
+ *
+ *
+ ******************************************************************************/
+
+#define AR_BIT(x) (1 << (x))
+#define DMA_RX_ERR_CRC AR_BIT(1)
+#define DMA_RX_ERR_DRIB AR_BIT(2)
+#define DMA_RX_ERR_MII AR_BIT(3)
+#define DMA_RX_EV2 AR_BIT(5)
+#define DMA_RX_ERR_COL AR_BIT(6)
+#define DMA_RX_LONG AR_BIT(7)
+#define DMA_RX_LS AR_BIT(8) /* last descriptor */
+#define DMA_RX_FS AR_BIT(9) /* first descriptor */
+#define DMA_RX_MF AR_BIT(10) /* multicast frame */
+#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */
+#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */
+#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */
+#define DMA_RX_ERROR AR_BIT(15) /* error summary */
+#define DMA_RX_LEN_MASK 0x3fff0000
+#define DMA_RX_LEN_SHIFT 16
+#define DMA_RX_FILT AR_BIT(30)
+#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */
+
+#define DMA_RX1_BSIZE_MASK 0x000007ff
+#define DMA_RX1_BSIZE_SHIFT 0
+#define DMA_RX1_CHAINED AR_BIT(24)
+#define DMA_RX1_RER AR_BIT(25)
+
+#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */
+#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */
+#define DMA_TX_COL_MASK 0x78
+#define DMA_TX_COL_SHIFT 3
+#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */
+#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */
+#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */
+#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */
+#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */
+#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */
+#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */
+#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */
+
+#define DMA_TX1_BSIZE_MASK 0x000007ff
+#define DMA_TX1_BSIZE_SHIFT 0
+#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */
+#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */
+#define DMA_TX1_FS AR_BIT(29) /* first segment */
+#define DMA_TX1_LS AR_BIT(30) /* last segment */
+#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */
+
+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
+
+#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */
+#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */
+#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check */
+#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */
+#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */
+#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */
+#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */
+#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */
+#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */
+#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */
+#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */
+#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */
+#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames
+ only) */
+#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */
+#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */
+#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */
+#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE
+ SET) */
+#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */
+#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid
+ frames) */
+
+#define MII_ADDR_BUSY AR_BIT(0)
+#define MII_ADDR_WRITE AR_BIT(1)
+#define MII_ADDR_REG_SHIFT 6
+#define MII_ADDR_PHY_SHIFT 11
+#define MII_DATA_SHIFT 0
+
+#define FLOW_CONTROL_FCE AR_BIT(1)
+
+#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */
+#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */
+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
+#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */
+
+#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */
+#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */
+#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */
+#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */
+#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */
+#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */
+#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */
+#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */
+#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */
+#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */
+#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */
+#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */
+#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */
+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
+
+#define DMA_CONTROL_SR AR_BIT(1) /* start receive */
+#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */
+#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */
+
+
+typedef struct {
+ volatile unsigned int status; // OWN, Device control and status.
+ volatile unsigned int devcs; // pkt Control bits + Length
+ volatile unsigned int addr; // Current Address.
+ volatile unsigned int descr; // Next descriptor in chain.
+} ar2313_descr_t;
+
+
+#endif // __ARUBA_DMA_H__
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
+ * Based on EP93xx and ifxmips wdt driver
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <ar531x.h>
+
+#define CLOCK_RATE 40000000
+#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
+
+static int wdt_timeout = 20;
+static int started = 0;
+static int in_use = 0;
+
+static void
+ar2315_wdt_enable(void)
+{
+ sysRegWrite(AR5315_WD, wdt_timeout * CLOCK_RATE);
+ sysRegWrite(AR5315_ISR, 0x80);
+}
+
+static ssize_t
+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+{
+ if(len)
+ ar2315_wdt_enable();
+ return len;
+}
+
+static int
+ar2315_wdt_open(struct inode *inode, struct file *file)
+{
+ if(in_use)
+ return -EBUSY;
+ ar2315_wdt_enable();
+ in_use = started = 1;
+ return nonseekable_open(inode, file);
+}
+
+static int
+ar2315_wdt_release(struct inode *inode, struct file *file)
+{
+ in_use = 0;
+ return 0;
+}
+
+static irqreturn_t
+ar2315_wdt_interrupt(int irq, void *dev_id)
+{
+ if(started)
+ {
+ printk(KERN_CRIT "watchdog expired, rebooting system\n");
+ emergency_restart();
+ } else {
+ sysRegWrite(AR5315_WDC, 0);
+ sysRegWrite(AR5315_WD, 0);
+ sysRegWrite(AR5315_ISR, 0x80);
+ }
+ return IRQ_HANDLED;
+}
+
+static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "ar2315 Watchdog",
+};
+
+static int
+ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ int new_wdt_timeout;
+ int ret = -ENOIOCTLCMD;
+
+ switch(cmd)
+ {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_KEEPALIVE:
+ ar2315_wdt_enable();
+ ret = 0;
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
+ break;
+ wdt_timeout = HEARTBEAT(new_wdt_timeout);
+ ar2315_wdt_enable();
+ break;
+
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(wdt_timeout, (int __user *)arg);
+ break;
+ }
+ return ret;
+}
+
+static struct file_operations ar2315_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = ar2315_wdt_write,
+ .ioctl = ar2315_wdt_ioctl,
+ .open = ar2315_wdt_open,
+ .release = ar2315_wdt_release,
+};
+
+static struct miscdevice ar2315_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &ar2315_wdt_fops,
+};
+
+static int
+ar2315_wdt_probe(struct platform_device *dev)
+{
+ int ret = 0;
+
+ ar2315_wdt_enable();
+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
+ if(ret)
+ {
+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
+ goto out;
+ }
+
+ ret = misc_register(&ar2315_wdt_miscdev);
+ if(ret)
+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
+
+out:
+ return ret;
+}
+
+static int
+ar2315_wdt_remove(struct platform_device *dev)
+{
+ misc_deregister(&ar2315_wdt_miscdev);
+ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
+ return 0;
+}
+
+static struct platform_driver ar2315_wdt_driver = {
+ .probe = ar2315_wdt_probe,
+ .remove = ar2315_wdt_remove,
+ .driver = {
+ .name = "ar2315_wdt",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init
+init_ar2315_wdt(void)
+{
+ int ret = platform_driver_register(&ar2315_wdt_driver);
+ if(ret)
+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
+ return ret;
+}
+
+static void __exit
+exit_ar2315_wdt(void)
+{
+ platform_driver_unregister(&ar2315_wdt_driver);
+}
+
+module_init(init_ar2315_wdt);
+module_exit(exit_ar2315_wdt);
--- /dev/null
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -60,6 +60,18 @@ config BCM47XX
+ help
+ Support for BCM47XX based boards
+
++config ATHEROS
++ bool "Atheros SoC support (EXPERIMENTAL)"
++ depends on EXPERIMENTAL
++ select DMA_NONCOHERENT
++ select CEVT_R4K
++ select CSRC_R4K
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select GENERIC_GPIO
++
+ config MIPS_COBALT
+ bool "Cobalt Server"
+ select CEVT_R4K
+@@ -597,6 +609,7 @@ config WR_PPMC
+
+ endchoice
+
++source "arch/mips/atheros/Kconfig"
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
+ source "arch/mips/emma/Kconfig"
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -278,6 +278,13 @@ libs-$(CONFIG_MIPS_XXS1500) += arch/mips
+ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
+
+ #
++# Atheros AR5312/AR2312 WiSoC
++#
++core-$(CONFIG_ATHEROS) += arch/mips/atheros/
++cflags-$(CONFIG_ATHEROS) += -I$(srctree)/arch/mips/include/asm/mach-atheros
++load-$(CONFIG_ATHEROS) += 0xffffffff80041000
++
++#
+ # Cobalt Server
+ #
+ core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
+--- a/arch/mips/include/asm/bootinfo.h
++++ b/arch/mips/include/asm/bootinfo.h
+@@ -57,6 +57,18 @@
+ #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
+ #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
+
++/*
++ * Valid machtype for group ATHEROS
++ */
++#define MACH_GROUP_ATHEROS 26
++#define MACH_ATHEROS_AR5312 0
++#define MACH_ATHEROS_AR2312 1
++#define MACH_ATHEROS_AR2313 2
++#define MACH_ATHEROS_AR2315 3
++#define MACH_ATHEROS_AR2316 4
++#define MACH_ATHEROS_AR2317 5
++#define MACH_ATHEROS_AR2318 6
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ extern char *system_type;
--- /dev/null
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ
+ help
+ This option enables FAST_READ access supported by ST M25Pxx.
+
++config MTD_SPIFLASH
++ tristate "Atheros AR2315/6/7 SPI Flash support"
++ depends on ATHEROS_AR5315
++
+ config MTD_SLRAM
+ tristate "Uncached system RAM"
+ help
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
+@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
+ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80) += m25p80.o
++obj-$(CONFIG_MTD_SPIFLASH) += spiflash.o
--- /dev/null
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -747,6 +747,12 @@ config TXX9_WDT
+ help
+ Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
++config ATHEROS_WDT
++ tristate "Atheros wisoc Watchdog Timer"
++ depends on ATHEROS
++ help
++ Hardware driver for the Atheros wisoc Watchdog Timer.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
+
+ # PARISC Architecture
+
--- /dev/null
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -359,6 +359,12 @@ config AX88796_93CX6
+ help
+ Select this if your platform comes with an external 93CX6 eeprom.
+
++config AR2313
++ tristate "AR2313 Ethernet support"
++ depends on NET_ETHERNET && ATHEROS
++ help
++ Support for the AR231x/531x ethernet controller
++
+ config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on PPC_PMAC && PPC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -199,6 +199,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+ obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
++obj-$(CONFIG_AR2313) += ar2313/
+ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
+ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
+ obj-$(CONFIG_DECLANCE) += declance.o
--- /dev/null
+--- a/drivers/net/ar2313/ar2313.c
++++ b/drivers/net/ar2313/ar2313.c
+@@ -291,7 +291,7 @@ int __init ar2313_probe(struct platform_
+ sp->mii_bus.write = mdiobus_write;
+ sp->mii_bus.reset = mdiobus_reset;
+ sp->mii_bus.name = "ar2313_eth_mii";
+- sp->mii_bus.id = 0;
++ snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0");
+ sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
+ *sp->mii_bus.irq = PHY_POLL;
+
--- /dev/null
+This patch reflects changes in mdiobus implementation in kernel 2.6.28.
+--- a/drivers/net/ar2313/ar2313.c
++++ b/drivers/net/ar2313/ar2313.c
+@@ -159,10 +159,10 @@ static void rx_tasklet_func(unsigned lon
+ static void rx_tasklet_cleanup(struct net_device *dev);
+ static void ar2313_multicast_list(struct net_device *dev);
+
+-static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
+-static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
+-static int mdiobus_reset(struct mii_bus *bus);
+-static int mdiobus_probe (struct net_device *dev);
++static int ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
++static int ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
++static int ar2313_mdiobus_reset(struct mii_bus *bus);
++static int ar2313_mdiobus_probe (struct net_device *dev);
+ static void ar2313_adjust_link(struct net_device *dev);
+
+ #ifndef ERR
+@@ -286,18 +286,22 @@ int __init ar2313_probe(struct platform_
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
+
+- sp->mii_bus.priv = dev;
+- sp->mii_bus.read = mdiobus_read;
+- sp->mii_bus.write = mdiobus_write;
+- sp->mii_bus.reset = mdiobus_reset;
+- sp->mii_bus.name = "ar2313_eth_mii";
+- snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0");
+- sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
+- *sp->mii_bus.irq = PHY_POLL;
++ sp->mii_bus = mdiobus_alloc();
++ if (sp->mii_bus == NULL)
++ return -1;
++
++ sp->mii_bus->priv = dev;
++ sp->mii_bus->read = ar2313_mdiobus_read;
++ sp->mii_bus->write = ar2313_mdiobus_write;
++ sp->mii_bus->reset = ar2313_mdiobus_reset;
++ sp->mii_bus->name = "ar2313_eth_mii";
++ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "0");
++ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
++ *sp->mii_bus->irq = PHY_POLL;
+
+- mdiobus_register(&sp->mii_bus);
++ mdiobus_register(sp->mii_bus);
+
+- if (mdiobus_probe(dev) != 0) {
++ if (ar2313_mdiobus_probe(dev) != 0) {
+ printk(KERN_ERR "ar2313: mdiobus_probe failed");
+ rx_tasklet_cleanup(dev);
+ ar2313_init_cleanup(dev);
+@@ -432,9 +436,12 @@ static void rx_tasklet_cleanup(struct ne
+ static int __exit ar2313_remove(struct platform_device *pdev)
+ {
+ struct net_device *dev = platform_get_drvdata(pdev);
++ struct ar2313_private *sp = netdev_priv(dev);
+ rx_tasklet_cleanup(dev);
+ ar2313_init_cleanup(dev);
+ unregister_netdev(dev);
++ mdiobus_unregister(sp->mii_bus);
++ mdiobus_free(sp->mii_bus);
+ kfree(dev);
+ return 0;
+ }
+@@ -619,7 +626,7 @@ static void ar2313_check_link(struct net
+ struct ar2313_private *sp = netdev_priv(dev);
+ u16 phyData;
+
+- phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR);
++ phyData = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
+ if (sp->phyData != phyData) {
+ if (phyData & BMSR_LSTATUS) {
+ /* link is present, ready link partner ability to deterine
+@@ -628,10 +635,10 @@ static void ar2313_check_link(struct net
+ u16 reg;
+
+ sp->link = 1;
+- reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR);
++ reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
+ if (reg & BMCR_ANENABLE) {
+ /* auto neg enabled */
+- reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA);
++ reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
+ } else {
+ /* no auto neg, just read duplex config */
+@@ -1320,7 +1327,7 @@ static void ar2313_adjust_link(struct ne
+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
+
+ static int
+-mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
++ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
+ {
+ struct net_device *const dev = bus->priv;
+ struct ar2313_private *sp = netdev_priv(dev);
+@@ -1332,7 +1339,7 @@ mdiobus_read(struct mii_bus *bus, int ph
+ }
+
+ static int
+-mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
++ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
+ u16 value)
+ {
+ struct net_device *const dev = bus->priv;
+@@ -1346,7 +1353,7 @@ mdiobus_write(struct mii_bus *bus, int p
+ return 0;
+ }
+
+-static int mdiobus_reset(struct mii_bus *bus)
++static int ar2313_mdiobus_reset(struct mii_bus *bus)
+ {
+ struct net_device *const dev = bus->priv;
+
+@@ -1355,7 +1362,7 @@ static int mdiobus_reset(struct mii_bus
+ return 0;
+ }
+
+-static int mdiobus_probe (struct net_device *dev)
++static int ar2313_mdiobus_probe (struct net_device *dev)
+ {
+ struct ar2313_private *const sp = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+@@ -1363,8 +1370,8 @@ static int mdiobus_probe (struct net_dev
+
+ /* find the first (lowest address) PHY on the current MAC's MII bus */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
+- if (sp->mii_bus.phy_map[phy_addr]) {
+- phydev = sp->mii_bus.phy_map[phy_addr];
++ if (sp->mii_bus->phy_map[phy_addr]) {
++ phydev = sp->mii_bus->phy_map[phy_addr];
+ break; /* break out with first one found */
+ }
+
+--- a/drivers/net/ar2313/ar2313.h
++++ b/drivers/net/ar2313/ar2313.h
+@@ -162,7 +162,7 @@ struct ar2313_private {
+ int unloading;
+
+ struct phy_device *phy_dev;
+- struct mii_bus mii_bus;
++ struct mii_bus *mii_bus;
+ int oldduplex;
+ };
+
--- /dev/null
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
+ static char nullstring[] = "unallocated";
+ #endif
+
++ buf = vmalloc(master->erasesize);
++ if (!buf)
++ return -ENOMEM;
++
++ restart:
+ if ( directory < 0 ) {
+ offset = master->size + directory * master->erasesize;
+- while (master->block_isbad &&
++ while (master->block_isbad &&
+ master->block_isbad(master, offset)) {
+ if (!offset) {
+ nogood:
+ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ vfree(buf);
+ return -EIO;
+ }
+ offset -= master->erasesize;
+ }
+ } else {
+ offset = directory * master->erasesize;
+- while (master->block_isbad &&
++ while (master->block_isbad &&
+ master->block_isbad(master, offset)) {
+ offset += master->erasesize;
+ if (offset == master->size)
+ goto nogood;
+ }
+ }
+- buf = vmalloc(master->erasesize);
+-
+- if (!buf)
+- return -ENOMEM;
+-
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+
+@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
+ }
+ if (i == numslots) {
+ /* Didn't find it */
++ if (offset + master->erasesize < master->size) {
++ /* not at the end of the flash yet, maybe next block :) */
++ directory++;
++ goto restart;
++ }
+ printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ master->name);
+ ret = 0;
--- /dev/null
+--- a/drivers/net/ar2313/ar2313.c
++++ b/drivers/net/ar2313/ar2313.c
+@@ -841,6 +841,7 @@ static void ar2313_load_rx_ring(struct n
+ for (i = 0; i < nr_bufs; i++) {
+ struct sk_buff *skb;
+ ar2313_descr_t *rd;
++ int offset = RX_OFFSET;
+
+ if (sp->rx_skb[idx]) {
+ #if DEBUG_RX
+@@ -862,7 +863,9 @@ static void ar2313_load_rx_ring(struct n
+ * Make sure IP header starts on a fresh cache line.
+ */
+ skb->dev = dev;
+- skb_reserve(skb, RX_OFFSET);
++ if (sp->phy_dev)
++ offset += sp->phy_dev->pkt_align;
++ skb_reserve(skb, offset);
+ sp->rx_skb[idx] = skb;
+
+ rd = (ar2313_descr_t *) & sp->rx_ring[idx];
+@@ -953,6 +956,7 @@ static int ar2313_rx_int(struct net_devi
+ /* alloc new buffer. */
+ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
+ if (skb_new != NULL) {
++ int offset;
+
+ skb = sp->rx_skb[idx];
+ /* set skb */
+@@ -960,13 +964,17 @@ static int ar2313_rx_int(struct net_devi
+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+
+ dev->stats.rx_bytes += skb->len;
+- skb->protocol = eth_type_trans(skb, dev);
++
+ /* pass the packet to upper layers */
+- netif_rx(skb);
++ sp->rx(skb);
+
+ skb_new->dev = dev;
++
+ /* 16 bit align */
+- skb_reserve(skb_new, RX_OFFSET + 32);
++ offset = RX_OFFSET + 32;
++ if (sp->phy_dev)
++ offset += sp->phy_dev->pkt_align;
++ skb_reserve(skb_new, offset);
+ /* reset descriptor's curr_addr */
+ rxdesc->addr = virt_to_phys(skb_new->data);
+
+@@ -1392,6 +1400,8 @@ static int ar2313_mdiobus_probe (struct
+ return PTR_ERR(phydev);
+ }
+
++ sp->rx = phydev->netif_rx;
++
+ /* mask with MAC supported features */
+ phydev->supported &= (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+--- a/drivers/net/ar2313/ar2313.h
++++ b/drivers/net/ar2313/ar2313.h
+@@ -107,6 +107,8 @@ typedef struct {
+ */
+ struct ar2313_private {
+ struct net_device *dev;
++ int (*rx)(struct sk_buff *skb);
++
+ int version;
+ u32 mb[2];
+
--- /dev/null
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -47,6 +47,7 @@
+ #include <asm/mmu_context.h>
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
++#include <asm/time.h>
+
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1514,6 +1515,8 @@ void __cpuinit per_cpu_trap_init(void)
+ */
+ if (cpu_has_mips_r2) {
+ cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
++ if (get_c0_compare_irq)
++ cp0_compare_irq = get_c0_compare_irq();
+ cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
+ if (cp0_perfcount_irq == cp0_compare_irq)
+ cp0_perfcount_irq = -1;
+--- a/arch/mips/include/asm/time.h
++++ b/arch/mips/include/asm/time.h
+@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
+ #ifdef CONFIG_CEVT_R4K
+ extern int mips_clockevent_init(void);
+ extern unsigned int __weak get_c0_compare_int(void);
++extern unsigned int __weak get_c0_compare_irq(void);
+ #else
+ static inline int mips_clockevent_init(void)
+ {
+--- a/arch/mips/atheros/board.c
++++ b/arch/mips/atheros/board.c
+@@ -265,6 +265,11 @@ void (*board_time_init)(void);
+ void __init plat_time_init(void) {
+ board_time_init();
+ }
++
++unsigned int __cpuinit get_c0_compare_irq(void)
++{
++ return CP0_LEGACY_COMPARE_IRQ;
++}
+ #endif
+
+ void __init arch_init_irq(void)
--- /dev/null
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -15,6 +15,22 @@
+ #include <asm/cevt-r4k.h>
+
+ /*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register. 4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++ do { \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ } while (0)
++
++/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
++ compare_change_hazard();
+ res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ return res;
+ }
+@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void)
+ return (read_c0_cause() >> cp0_compare_irq) & 0x100;
+ }
+
+-/*
+- * Compare interrupt can be routed and latched outside the core,
+- * so a single execution hazard barrier may not be enough to give
+- * it time to clear as seen in the Cause register. 4 time the
+- * pipeline depth seems reasonably conservative, and empirically
+- * works better in configurations with high CPU/bus clock ratios.
+- */
+-
+-#define compare_change_hazard() \
+- do { \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- } while (0)
+-
+ int c0_compare_int_usable(void)
+ {
+ unsigned int delta;
projects / openwrt / staging / chunkeey.git / commitdiff