CONFIG_INITRAMFS_SOURCE="../../root"
CONFIG_IRQ_CPU=y
# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_RB750 is not set
# CONFIG_LEDS_WNDR3700_USB is not set
# CONFIG_M25PXX_USE_FAST_READ is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_IRQ_CPU=y
# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_RB750 is not set
# CONFIG_LEDS_WNDR3700_USB is not set
CONFIG_LOONGSON_UART_BASE=y
# CONFIG_M25PXX_USE_FAST_READ is not set
* by the Free Software Foundation.
*/
+#include <linux/platform_device.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/mach-rb750.h>
#include "machtype.h"
#include "dev-ap91-eth.h"
+static struct rb750_led_data rb750_leds[] = {
+ {
+ .name = "rb750:green:act",
+ .mask = RB750_LED_ACT,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port1",
+ .mask = RB750_LED_PORT5,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port2",
+ .mask = RB750_LED_PORT4,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port3",
+ .mask = RB750_LED_PORT3,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port4",
+ .mask = RB750_LED_PORT2,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port5",
+ .mask = RB750_LED_PORT1,
+ .active_low = 1,
+ }
+};
+
+static struct rb750_led_platform_data rb750_leds_data = {
+ .num_leds = ARRAY_SIZE(rb750_leds),
+ .leds = rb750_leds,
+};
+
+static struct platform_device rb750_leds_device = {
+ .name = "leds-rb750",
+ .id = -1,
+ .dev = {
+ .platform_data = &rb750_leds_data,
+ }
+};
+
int rb750_latch_change(u32 mask_clr, u32 mask_set)
{
static DEFINE_SPINLOCK(lock);
static void __init rb750_setup(void)
{
+ ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
ap91_eth_init(NULL);
+ platform_device_register(&rb750_leds_device);
}
MIPS_MACHINE(AR71XX_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
+struct rb750_led_data {
+ char *name;
+ char *default_trigger;
+ u32 mask;
+ int active_low;
+};
+
+struct rb750_led_platform_data {
+ int num_leds;
+ struct rb750_led_data *leds;
+};
+
int rb750_latch_change(u32 mask_clr, u32 mask_set);
#endif /* _MACH_RB750_H */
\ No newline at end of file
--- /dev/null
+/*
+ * LED driver for the RouterBOARD 750
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+
+#include <asm/mach-ar71xx/mach-rb750.h>
+
+#define DRV_NAME "leds-rb750"
+
+struct rb750_led_dev {
+ struct led_classdev cdev;
+ u32 mask;
+ int active_low;
+};
+
+struct rb750_led_drvdata {
+ struct rb750_led_dev *led_devs;
+ int num_leds;
+};
+
+static inline struct rb750_led_dev *to_rbled(struct led_classdev *led_cdev)
+{
+ return (struct rb750_led_dev *)container_of(led_cdev,
+ struct rb750_led_dev, cdev);
+}
+
+static void rb750_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct rb750_led_dev *rbled = to_rbled(led_cdev);
+ int level;
+
+ level = (value == LED_OFF) ? 0 : 1;
+ level ^= rbled->active_low;
+
+ if (level)
+ rb750_latch_change(0, rbled->mask);
+ else
+ rb750_latch_change(rbled->mask, 0);
+}
+
+static int __devinit rb750_led_probe(struct platform_device *pdev)
+{
+ struct rb750_led_platform_data *pdata;
+ struct rb750_led_drvdata *drvdata;
+ int ret = 0;
+ int i;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ drvdata = kzalloc(sizeof(struct rb750_led_drvdata) +
+ sizeof(struct rb750_led_dev) * pdata->num_leds,
+ GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ drvdata->num_leds = pdata->num_leds;
+ drvdata->led_devs = (struct rb750_led_dev *) &drvdata[1];
+
+ for (i = 0; i < drvdata->num_leds; i++) {
+ struct rb750_led_dev *rbled = &drvdata->led_devs[i];
+ struct rb750_led_data *led_data = &pdata->leds[i];
+
+ rbled->cdev.name = led_data->name;
+ rbled->cdev.default_trigger = led_data->default_trigger;
+ rbled->cdev.brightness_set = rb750_led_brightness_set;
+ rbled->cdev.brightness = LED_OFF;
+
+ rbled->mask = led_data->mask;
+ rbled->active_low = !!led_data->active_low;
+
+ ret = led_classdev_register(&pdev->dev, &rbled->cdev);
+ if (ret)
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+ return 0;
+
+ err:
+ for (i = i - 1; i >= 0; i--)
+ led_classdev_unregister(&drvdata->led_devs[i].cdev);
+
+ kfree(drvdata);
+ return ret;
+}
+
+static int __devexit rb750_led_remove(struct platform_device *pdev)
+{
+ struct rb750_led_drvdata *drvdata;
+ int i;
+
+ drvdata = platform_get_drvdata(pdev);
+ for (i = 0; i < drvdata->num_leds; i++)
+ led_classdev_unregister(&drvdata->led_devs[i].cdev);
+
+ kfree(drvdata);
+ return 0;
+}
+
+static struct platform_driver rb750_led_driver = {
+ .probe = rb750_led_probe,
+ .remove = __devexit_p(rb750_led_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+MODULE_ALIAS("platform:leds-rb750");
+
+static int __init rb750_led_init(void)
+{
+ return platform_driver_register(&rb750_led_driver);
+}
+
+static void __exit rb750_led_exit(void)
+{
+ platform_driver_unregister(&rb750_led_driver);
+}
+
+module_init(rb750_led_init);
+module_exit(rb750_led_exit);
+
+MODULE_DESCRIPTION(DRV_NAME);
+MODULE_DESCRIPTION("LED driver for the RouterBOARD 750");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -243,6 +243,10 @@
+ This option enables support for the USB LED found on the
+ NETGEAR WNDR3700 board.
+
++config LEDS_RB750
++ tristate "LED driver for the Mikrotik RouterBOARD 750"
++ depends on LEDS_CLASS && AR71XX_MACH_RB750
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGERS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -30,6 +30,7 @@
+ obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+ obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
++obj-${CONFIG_LEDS_RB750} += leds-rb750.o
+
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
--- /dev/null
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -243,6 +243,10 @@
+ This option enables support for the USB LED found on the
+ NETGEAR WNDR3700 board.
+
++config LEDS_RB750
++ tristate "LED driver for the Mikrotik RouterBOARD 750"
++ depends on LEDS_CLASS && AR71XX_MACH_RB750
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGERS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -30,6 +30,7 @@
+ obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+ obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
++obj-${CONFIG_LEDS_RB750} += leds-rb750.o
+
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
projects / openwrt / staging / ynezz.git / commitdiff