generic: add quirk for HG MXPD-483II 2500M fiber SFP

The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
    Transceiver type                          : Ethernet: 1000BASE-LX
    ...
    BR, Nominal                               : 2600MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.

https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60

X-Patchwork-Id: 13197378
X-Mailing-List: netdev@vger.kernel.org
X-Patchwork-Delegate: kuba@kernel.org
Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

diff --git a/target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch b/target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch
index 83b2c304e2d10e3e1feb90377df629b3da771ff6..8ad43c0fe90fbf8a89b99f20bc0844290085d047 100644 (file)
--- a/target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch
+++ b/target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch
@@ -26,7 +26,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -373,6 +373,11 @@ static const struct sfp_quirk sfp_quirks
+@@ -377,6 +377,11 @@ static const struct sfp_quirk sfp_quirks
                .modes = sfp_quirk_2500basex,
                .fixup = sfp_fixup_ignore_tx_fault,
        }, {
@@ -38,7 +38,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
                // Lantech 8330-262D-E can operate at 2500base-X, but
                // incorrectly report 2500MBd NRZ in their EEPROM
                .vendor = "Lantech",
-@@ -2306,7 +2311,8 @@ static void sfp_sm_main(struct sfp *sfp,
+@@ -2310,7 +2315,8 @@ static void sfp_sm_main(struct sfp *sfp,
                         * or t_start_up, so assume there is a fault.
                         */
                        sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
@@ -48,7 +48,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
                } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
        init_done:
                        sfp->sm_phy_retries = R_PHY_RETRY;
-@@ -2529,10 +2535,12 @@ static void sfp_check_state(struct sfp *
+@@ -2533,10 +2539,12 @@ static void sfp_check_state(struct sfp *
        mutex_lock(&sfp->st_mutex);
        state = sfp_get_state(sfp);
        changed = state ^ sfp->state;

diff --git a/target/linux/generic/pending-5.15/701-net-sfp-add-quirk-for-MXPD-483II.patch b/target/linux/generic/pending-5.15/701-net-sfp-add-quirk-for-MXPD-483II.patch
new file mode 100644 (file)
index 0000000..86a665f
--- /dev/null
+++ b/target/linux/generic/pending-5.15/701-net-sfp-add-quirk-for-MXPD-483II.patch
@@ -0,0 +1,13 @@
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -366,6 +366,10 @@ static const struct sfp_quirk sfp_quirks
+               .part = "HL-GSFP",
+               .fixup = sfp_fixup_halny_gsfp,
+       }, {
++              .vendor = "HG GENUINE",
++              .part = "MXPD-483II",
++              .modes = sfp_quirk_2500basex,
++      }, {
+               // Huawei MA5671A can operate at 2500base-X, but report 1.2GBd
+               // NRZ in their EEPROM
+               .vendor = "HUAWEI",