ramips: unbreak rt2880 support

Signed-off-by: John Crsipin <blogic@openwrt.org>
SVN-Revision: 36559

diff --git a/target/linux/ramips/dts/F5D8235_V1.dts b/target/linux/ramips/dts/F5D8235_V1.dts
new file mode 100644 (file)
index 0000000..41a7f12
--- /dev/null
+++ b/target/linux/ramips/dts/F5D8235_V1.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "F5D8235_V1", "ralink,rt2880-soc";
+       model = "Belkin F5D8235 v1";
+
+       palmbus@300000 {
+               sysc@0 {
+                       ralink,pinmux = "uartlite";
+                       ralink,gpiomux = "i2c";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "uboot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+               partition@30000 {
+                       label = "uboot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+               partition@40000 {
+                       label = "calibration";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+               partition@50000 {
+                       label = "linux";
+                       reg = <0x50000 0x3b0000>;
+               };
+       };
+
+       ethernet@400000 {
+               status = "okay";
+
+               ralink,fixed-link = <1000 1 1 1>;
+       };
+
+       wmac@480000 {
+               status = "okay";
+       };
+
+       rtl8367s {
+               compatible = "realtek,rtl8367s";
+               gpio-sda = <&gpio0 1 0>;
+               gpio-sck = <&gpio0 2 0>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 9 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               storage {
+                       label = "f5d8235-v1:blue:storage";
+                       gpios = <&gpio0 7 1>;
+               };
+               storage2 {
+                       label = "f5d8235-v1:orange:storage";
+                       gpios = <&gpio0 8 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/V11STFE.dts b/target/linux/ramips/dts/V11STFE.dts
new file mode 100644 (file)
index 0000000..20cbaea
--- /dev/null
+++ b/target/linux/ramips/dts/V11STFE.dts
@@ -0,0 +1,93 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+       compatible = "V11ST-FE", "ralink,rt2880-soc";
+       model = "Ralink V11ST-FE";
+
+       palmbus@300000 {
+               sysc@0 {
+                       ralink,pinmux = "uartlite";
+                       ralink,gpiomux = "i2c", "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,pcimux = "pci-fnc";
+                       ralink,wdtmux = <0>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       ethernet@400000 {
+               status = "okay";
+       };
+
+       wmac@480000 {
+               status = "okay";
+       };
+
+       pci@10140000 {
+               status = "okay";
+
+               host-bridge {
+                       pci-bridge@1 {
+                               status = "okay";
+                       };
+               };
+       };
+
+       nor-flash@1c000000 {
+               compatible = "cfi-flash";
+               reg = <0x1c000000 0x800000>;
+
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       reg = <0x0 0x0030000>;
+                       label = "u-boot";
+                       read-only;
+               };
+
+               partition@30000 {
+                       reg = <0x00030000 0x00010000>;
+                       label = "u-boot-env";
+                       read-only;
+               };
+
+               partition@40000 {
+                       reg = <0x00040000 0x00010000>;
+                       label = "factory";
+                       read-only;
+               };
+
+               partition@50000 {
+                       reg = <0x00050000 0x003b0000>;
+                       label = "firmware";
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 0>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               status {
+                       label = "v11st-fe:green:status";
+                       gpios = <&gpio0 12 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/WLI-TX4-AG300N.dts b/target/linux/ramips/dts/WLI-TX4-AG300N.dts
new file mode 100644 (file)
index 0000000..ff33a8a
--- /dev/null
+++ b/target/linux/ramips/dts/WLI-TX4-AG300N.dts
@@ -0,0 +1,101 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
+       model = "Buffalo WLI-TX4-AG300N";
+
+       palmbus@300000 {
+               sysc@0 {
+                       ralink,pinmux = "uartlite";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "uboot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+               partition@30000 {
+                       label = "uboot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+               partition@40000 {
+                       label = "calibration";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+               partition@50000 {
+                       label = "linux";
+                       reg = <0x50000 0x3b0000>;
+               };
+       };
+
+       ethernet@400000 {
+               status = "okay";
+
+               ralink,fixed-link = <100 1 1 1>;
+       };
+
+       wmac@480000 {
+               status = "okay";
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+               bandwidth {
+                       label = "bandwidth";
+                       gpios = <&gpio0 8 0>;
+                       linux,code = <0x198>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 9 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               diag {
+                       label = "buffalo:red:diag";
+                       gpios = <&gpio0 10 1>;
+               };
+               power {
+                       label = "buffalo:blue:power";
+                       gpios = <&gpio0 12 1>;
+               };
+               security {
+                       label = "buffalo:blue:security";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 621f23edb92b89bd8e1e08549d80000ea96cc443..5e2d6b7762c2730b7143cd060d5e18bd9ee441f5 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -221,8 +221,6 @@ BuildFirmware/dap1350/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)
 belkin_f5d8235v1_mtd_size=7929856
 Image/Build/Profile/F5D8235V1=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v1,F5D8235_V1,$(belkin_f5d8235v1_mtd_size))
 
-Image/Build/Profile/BR6524N=$(call BuildFirmware/Edimax/$(1),$(1),br6524n,BR6524N,$(ralink_default_fw_size_4M),CSYS,WNRA,0x50000,0xc0000)
-
 Image/Build/Profile/RTN15=$(call BuildFirmware/Default4M/$(1),$(1),rt-n15,RT-N15)
 
 Image/Build/Profile/V11STFE=$(call BuildFirmware/Default4M/$(1),$(1),v11st-fe,V11STFE)
@@ -232,7 +230,6 @@ Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx
 ifeq ($(SUBTARGET),rt288x)
 define Image/Build/Profile/Default
        $(call Image/Build/Profile/F5D8235V1,$(1))
-       $(call Image/Build/Profile/BR6524N,$(1))
        $(call Image/Build/Profile/RTN15,$(1))
        $(call Image/Build/Profile/V11STFE,$(1))
        $(call Image/Build/Profile/WLITX4AG300N,$(1))

diff --git a/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch b/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch
index 88514008a71f16ab54dbb058aefaa1534deec6ad..30e1b87fe7d27df2e04e5b0e778d9034f22219e8 100644 (file)
--- a/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch
+++ b/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch
@@ -19,8 +19,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/ralink/rt305x-usb.c
  create mode 100644 arch/mips/ralink/rt3883-usb.c
 
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
+Index: linux-3.8.11/arch/mips/ralink/Makefile
+===================================================================
+--- linux-3.8.11.orig/arch/mips/ralink/Makefile        2013-05-06 09:58:57.772224085 +0200
++++ linux-3.8.11/arch/mips/ralink/Makefile     2013-05-06 10:01:59.252231955 +0200
 @@ -9,8 +9,8 @@
  obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o
  
@@ -32,18 +34,22 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_SOC_MT7620) += mt7620.o
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -51,5 +51,6 @@ extern void prom_soc_init(struct ralink_
+Index: linux-3.8.11/arch/mips/ralink/common.h
+===================================================================
+--- linux-3.8.11.orig/arch/mips/ralink/common.h        2013-05-06 09:58:57.748224086 +0200
++++ linux-3.8.11/arch/mips/ralink/common.h     2013-05-06 09:58:58.100224099 +0200
+@@ -51,5 +51,6 @@
  __iomem void *plat_of_remap_node(const char *node);
  
  void ralink_pinmux(void);
 +void ralink_usb_platform(void);
  
  #endif /* _RALINK_COMMON_H__ */
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -140,6 +140,11 @@ struct ralink_pinmux rt_gpio_pinmux = {
+Index: linux-3.8.11/arch/mips/ralink/mt7620.c
+===================================================================
+--- linux-3.8.11.orig/arch/mips/ralink/mt7620.c        2013-05-06 09:58:57.696224079 +0200
++++ linux-3.8.11/arch/mips/ralink/mt7620.c     2013-05-06 09:58:58.100224099 +0200
+@@ -140,6 +140,11 @@
        .uart_mask = MT7620_GPIO_MODE_GPIO,
  };
  
@@ -55,9 +61,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  void __init ralink_clk_init(void)
  {
        unsigned long cpu_rate, sys_rate;
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -111,6 +111,7 @@ static int __init plat_of_setup(void)
+Index: linux-3.8.11/arch/mips/ralink/of.c
+===================================================================
+--- linux-3.8.11.orig/arch/mips/ralink/of.c    2013-05-06 09:58:57.748224086 +0200
++++ linux-3.8.11/arch/mips/ralink/of.c 2013-05-06 10:01:59.252231955 +0200
+@@ -111,6 +111,7 @@
                panic("failed to populate DT\n");
  
        ralink_pinmux();
@@ -65,8 +73,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
        return 0;
  }
---- /dev/null
-+++ b/arch/mips/ralink/rt305x-usb.c
+Index: linux-3.8.11/arch/mips/ralink/rt305x-usb.c
+===================================================================
+--- /dev/null  1970-01-01 00:00:00.000000000 +0000
++++ linux-3.8.11/arch/mips/ralink/rt305x-usb.c 2013-05-06 09:58:58.100224099 +0200
 @@ -0,0 +1,120 @@
 +/*
 + * This program is free software; you can redistribute it and/or modify it
@@ -188,8 +198,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +                              &rt3352_ehci_data, &rt3352_ehci_dmamask);
 +      }
 +}
---- /dev/null
-+++ b/arch/mips/ralink/rt3883-usb.c
+Index: linux-3.8.11/arch/mips/ralink/rt3883-usb.c
+===================================================================
+--- /dev/null  1970-01-01 00:00:00.000000000 +0000
++++ linux-3.8.11/arch/mips/ralink/rt3883-usb.c 2013-05-06 09:58:58.100224099 +0200
 @@ -0,0 +1,118 @@
 +/*
 + * This program is free software; you can redistribute it and/or modify it
@@ -309,3 +321,19 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      ralink_add_usb("ehci-platform",
 +                      &rt3883_ehci_data, &rt3883_ehci_dmamask);
 +}
+Index: linux-3.8.11/arch/mips/ralink/rt288x.c
+===================================================================
+--- linux-3.8.11.orig/arch/mips/ralink/rt288x.c        2013-05-06 09:58:57.644224079 +0200
++++ linux-3.8.11/arch/mips/ralink/rt288x.c     2013-05-06 10:02:32.216233389 +0200
+@@ -74,6 +74,11 @@
+       .wdt_reset = rt288x_wdt_reset,
+ };
+ 
++void ralink_usb_platform(void)
++{
++
++}
++
+ void __init ralink_clk_init(void)
+ {
+       unsigned long cpu_rate;

diff --git a/target/linux/ramips/rt288x/target.mk b/target/linux/ramips/rt288x/target.mk
index d34c0298b9ccc39080ed85b3c9184ef8e8da6554..f826eab88e15d64fe7f91ab034ab0a8e790655b0 100644 (file)
--- a/target/linux/ramips/rt288x/target.mk
+++ b/target/linux/ramips/rt288x/target.mk
@@ -5,7 +5,6 @@
 SUBTARGET:=rt288x
 BOARDNAME:=RT288x based boards
 CFLAGS+= -mips32r2 -mtune=mips32r2
-FEATURES:=broken
 
 define Target/Description
        Build firmware images for Ralink RT288x based boards.