Changes since U-Boot 1.1.1:
======================================================================
+* Configure SX1 board to use drivers/cfi_flash.c
+
+* Patches by Michael Bendzick, 30 Aug 2004:
+ - Configure omap1510inn board to use drivers/cfi_flash.c
+ - Make drivers/cfi_flash.c protect environment and redundant
+ environment.
+
+* Patch by Steven Scholz, 23 Jun 2004:
+ - Add script (tools/img2brec.sh) to programm U-Boot into
+ (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
+
* Patches by Scott McNutt, 24 Aug 2004:
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
LIB = lib$(BOARD).a
-OBJS := omap1510innovator.o flash.o
+OBJS := omap1510innovator.o
SOBJS := platform.o
$(LIB): $(OBJS) $(SOBJS)
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
-
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
- &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- printf ("28F128J3A\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
- volatile FPW value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW) 0x00AA00AA;
- addr[0x2AAA] = (FPW) 0x00550055;
- addr[0x5555] = (FPW) 0x00900090;
-
- mb ();
- value = addr[0];
-
- switch (value) {
-
- case (FPW) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb ();
- value = addr[1]; /* device ID */
- switch (value) {
-
- case (FPW) INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x02000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /*start = get_timer (0); */
- last = start;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
-
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = (FPW) 0x00B000B0; /* suspend erase */
- *addr = (FPW) 0x00FF00FF; /* reset to read mode */
- rcode = 1;
- break;
- }
- }
-
- *addr = (FPW) 0x00500050; /* clear status register cmd. */
- *addr = (FPW) 0x00FF00FF; /* resest to read mode */
-
- printf (" done\n");
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#else
- wp = (addr & ~3);
- port_width = 4;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong status;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- *addr = (FPW) 0x00400040; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* wait while polling the status register */
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
-
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (0);
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
LIB = lib$(BOARD).a
-OBJS := sx1.o flash.o
+OBJS := sx1.o
SOBJS := platform.o
$(LIB): $(OBJS) $(SOBJS)
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-#include <environment.h>
-
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
-
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- case 1:
- flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
- &flash_info[0]);
-
-#ifdef CFG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CFG_ENV_ADDR_REDUND,
- CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
- &flash_info[0]);
-#endif
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- printf ("28F128J3A\n");
- break;
- case FLASH_28F640J3A:
- printf ("28F640J3A\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
- volatile FPW value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW) 0x00AA00AA;
- addr[0x2AAA] = (FPW) 0x00550055;
- addr[0x5555] = (FPW) 0x00900090;
-
- mb ();
- value = addr[0];
-
- switch (value) {
- case (FPW) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb ();
- value = addr[1]; /* device ID */
- switch (value) {
- case (FPW) INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000;
- break; /* => 16 MB */
- case (FPW) INTEL_ID_28F640J3A:
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 0x00800000;
- break; /* => 8 MB */
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /*start = get_timer (0); */
- last = start;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
-
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = (FPW) 0x00B000B0; /* suspend erase */
- *addr = (FPW) 0x00FF00FF; /* reset to read mode */
- rcode = 1;
- break;
- }
- }
-
- *addr = (FPW) 0x00500050; /* clear status register cmd. */
- *addr = (FPW) 0x00FF00FF; /* resest to read mode */
-
- printf (" done\n");
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#else
- wp = (addr & ~3);
- port_width = 4;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong status;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- *addr = (FPW) 0x00400040; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* wait while polling the status register */
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
-
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (0);
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
&flash_info[0]);
#endif
+ /* Environment protection ON by default */
+#ifdef CFG_ENV_IS_IN_FLASH
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ /* Redundant environment protection ON by default */
+#ifdef CFG_ENV_ADDR_REDUND
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+ &flash_info[0]);
+#endif
return (size);
}
* FLASH and environment organization
*/
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define PHYS_FLASH_SIZE (16 << 10) /* 16 MB */
+#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */
#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) /* addr of environment */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
+#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE }
+
+/*-----------------------------------------------------------------------
+ * FLASH driver setup
+ */
+#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET 0x20000 /* environment starts here */
+#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
+#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE /* Total Size of Environment Sector */
+#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_SIZE_REDUND 0x20000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
+#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */
#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) /* addr of environment */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + PHYS_FLASH_SECT_SIZE)
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
+#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE }
+
+/*-----------------------------------------------------------------------
+ * FLASH driver setup
+ */
+#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET 0x20000 /* environment starts here */
+#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */
#endif /* __CONFIG_H */
--- /dev/null
+#!/bin/sh
+
+# This script converts binary files (u-boot.bin) into so called
+# bootstrap records that are accepted by Motorola's MC9328MX1/L
+# (a.k.a. DragaonBall i.MX) in "Bootstrap Mode"
+#
+# The code for the SynchFlash programming routines is taken from
+# Bootloader\Bin\SyncFlash\programBoot_b.txt contained in
+# Motorolas LINUX_BSP_0_3_8.tar.gz
+#
+# The script could easily extended for AMD flash routines.
+#
+# 2004-06-23 - steven.scholz@imc-berlin.de
+
+#################################################################################
+# From the posting to the U-Boot-Users mailing list, 23 Jun 2004:
+# ===============================================================
+# I just hacked a simple script that converts u-boot.bin into a text file
+# containg processor init code, SynchFlash programming code and U-Boot data in
+# form of so called b-records.
+#
+# This can be used to programm U-Boot into (Synch)Flash using the Bootstrap
+# Mode of the MC9328MX1/L
+#
+# 0AFE1F3410202E2E2E000000002073756363656564/
+# 0AFE1F44102E0A0000206661696C656420210A0000/
+# 0AFE100000
+# ...
+# MX1ADS Sync-flash Programming Utility v0.5 2002/08/21
+#
+# Source address (stored in 0x0AFE0000): 0x0A000000
+# Target address (stored in 0x0AFE0004): 0x0C000000
+# Size (stored in 0x0AFE0008): 0x0001A320
+#
+# Press any key to start programming ...
+# Erasing ...
+# Blank checking ...
+# Programming ...
+# Verifying flash ... succeed.
+#
+# Programming finished.
+#
+# So no need for a BDI2000 anymore... ;-)
+#
+# This is working on my MX1ADS eval board. Hope this could be useful for
+# someone.
+#################################################################################
+
+if [ "$#" -lt 1 -o "$#" -gt 2 ] ; then
+ echo "Usage: $0 infile [outfile]" >&2
+ echo " $0 u-boot.bin [u-boot.brec]" >&2
+ exit 1
+fi
+
+if [ "$#" -ge 1 ] ; then
+ INFILE=$1
+fi
+
+if [ ! -f $INFILE ] ; then
+ echo "Error: file '$INFILE' does not exist." >&2
+ exit 1
+fi
+
+FILESIZE=`filesize $INFILE`
+
+output_init()
+{
+echo "\
+********************************************\r
+* Initialize I/O Pad Driving Strength *\r
+********************************************\r
+0021B80CC4000003AB\r
+********************************************\r
+* Initialize SDRAM *\r
+********************************************\r
+00221000C492120200 ; pre-charge command\r
+08200000E4 ; special read\r
+\r
+00221000C4A2120200 ; auto-refresh command\r
+08000000E4 ; 8 special read\r
+08000000E4 ; 8 special read\r
+08000000E4 ; 8 special read\r
+08000000E4 ; 8 special read\r
+08000000E4 ; 8 special read\r
+08000000E4 ; 8 special read\r
+08000000E4 ; 8 special read\r
+08000000E4 ; 8 special read\r
+\r
+00221000C4B2120200 ; set mode register\r
+08111800E4 ; special read\r
+\r
+00221000C482124200 ; set normal mode\r
+\r"
+}
+
+output_uboot()
+{
+echo "\
+********************************************\r
+* U-Boot image as bootstrap records *\r
+* will be stored in SDRAM at 0x0A000000 *\r
+********************************************\r
+\r"
+
+cat $INFILE | \
+hexdump -v -e "\"0A0%05.5_ax10\" 16/1 \"%02x\"\"\r\n\"" | \
+tr [:lower:] [:upper:]
+}
+
+output_flashprog()
+{
+echo "\
+********************************************\r
+* Address of arguments to flashProg *\r
+* ---------------------------------------- *\r
+* Source : 0x0A000000 *\r
+* Destination : 0x0C000000 *\r"
+
+# get the real size of the U-Boot image
+printf "* Size : 0x%08X *\r\n" $FILESIZE
+printf "********************************************\r\n"
+printf "0AFE0000CC0A0000000C000000%08X\r\n" $FILESIZE
+
+#;0AFE0000CC0A0000000C00000000006000\r
+
+echo "\
+********************************************\r
+* Flash Program *\r
+********************************************\r
+0AFE10001008D09FE5AC0000EA00F0A0E1A42DFE0A\r
+0AFE1010100080FE0A0DC0A0E100D82DE904B04CE2\r
+0AFE1020109820A0E318309FE5003093E5033082E0\r
+0AFE103010003093E5013003E2FF3003E20300A0E1\r
+0AFE10401000A81BE9A01DFE0A0DC0A0E100D82DE9\r
+0AFE10501004B04CE204D04DE20030A0E10D304BE5\r
+0AFE1060109820A0E330309FE5003093E5033082E0\r
+0AFE107010003093E5013903E2000053E3F7FFFF0A\r
+0AFE1080104020A0E310309FE5003093E5032082E0\r
+0AFE1090100D305BE5003082E500A81BE9A01DFE0A\r
+0AFE10A0100DC0A0E100D82DE904B04CE20000A0E1\r
+0AFE10B010D7FFFFEB0030A0E1FF3003E2000053E3\r
+0AFE10C010FAFFFF0A10309FE5003093E5003093E5\r
+0AFE10D010FF3003E20300A0E100A81BE9A01DFE0A\r
+0AFE10E0100DC0A0E100D82DE904B04CE204D04DE2\r
+0AFE10F0100030A0E10D304BE50D305BE52332A0E1\r
+0AFE1100100E304BE50E305BE5090053E30300009A\r
+0AFE1110100E305BE5373083E20E304BE5020000EA\r
+0AFE1120100E305BE5303083E20E304BE50E305BE5\r
+0AFE1130100300A0E1C3FFFFEB0D305BE50F3003E2\r
+0AFE1140100E304BE50E305BE5090053E30300009A\r
+0AFE1150100E305BE5373083E20E304BE5020000EA\r
+0AFE1160100E305BE5303083E20E304BE50E305BE5\r
+0AFE1170100300A0E1B3FFFFEB00A81BE90DC0A0E1\r
+0AFE11801000D82DE904B04CE21CD04DE210000BE5\r
+0AFE11901014100BE518200BE588009FE5E50200EB\r
+0AFE11A01010301BE51C300BE514301BE520300BE5\r
+0AFE11B0100030A0E324300BE524201BE518301BE5\r
+0AFE11C010030052E10000003A120000EA1C004BE2\r
+0AFE11D010002090E520104BE2003091E500C093E5\r
+0AFE11E010043083E2003081E5003092E5042082E2\r
+0AFE11F010002080E50C0053E10200000A0030A0E3\r
+0AFE12001028300BE5050000EA24301BE5043083E2\r
+0AFE12101024300BE5E7FFFFEA0130A0E328300BE5\r
+0AFE12201028001BE500A81BE9E81EFE0A0DC0A0E1\r
+0AFE12301000D82DE904B04CE214D04DE210000BE5\r
+0AFE12401014100BE56C009FE5BA0200EB10301BE5\r
+0AFE12501018300BE50030A0E31C300BE51C201BE5\r
+0AFE12601014301BE5030052E10000003A0D0000EA\r
+0AFE12701018304BE2002093E5001092E5042082E2\r
+0AFE128010002083E5010071E30200000A0030A0E3\r
+0AFE12901020300BE5050000EA1C301BE5043083E2\r
+0AFE12A0101C300BE5ECFFFFEA0130A0E320300BE5\r
+0AFE12B01020001BE500A81BE9001FFE0A0DC0A0E1\r
+0AFE12C01000D82DE904B04CE224D04DE20130A0E3\r
+0AFE12D01024300BE5A4229FE58139A0E3023A83E2\r
+0AFE12E010003082E59820A0E390329FE5003093E5\r
+0AFE12F010033082E0003093E5023903E2000053E3\r
+0AFE1300100300001A74229FE58139A0E3033A83E2\r
+0AFE131010003082E568029FE5860200EBAF36A0E3\r
+0AFE1320100E3883E2003093E510300BE554029FE5\r
+0AFE133010800200EB10301BE5233CA0E1FF3003E2\r
+0AFE1340100300A0E165FFFFEB10301BE52338A0E1\r
+0AFE135010FF3003E20300A0E160FFFFEB10301BE5\r
+0AFE1360102334A0E1FF3003E20300A0E15BFFFFEB\r
+0AFE13701010305BE50300A0E158FFFFEB0A00A0E3\r
+0AFE13801030FFFFEB0D00A0E32EFFFFEBAF36A0E3\r
+0AFE1390100E3883E2043083E2003093E514300BE5\r
+0AFE13A010E4019FE5630200EB14301BE5233CA0E1\r
+0AFE13B010FF3003E20300A0E148FFFFEB14301BE5\r
+0AFE13C0102338A0E1FF3003E20300A0E143FFFFEB\r
+0AFE13D01014301BE52334A0E1FF3003E20300A0E1\r
+0AFE13E0103EFFFFEB14305BE50300A0E13BFFFFEB\r
+0AFE13F0100A00A0E313FFFFEB0D00A0E311FFFFEB\r
+0AFE140010AF36A0E30E3883E2083083E2003093E5\r
+0AFE14101018300BE574019FE5460200EB18301BE5\r
+0AFE142010233CA0E1FF3003E20300A0E12BFFFFEB\r
+0AFE14301018301BE52338A0E1FF3003E20300A0E1\r
+0AFE14401026FFFFEB18301BE52334A0E1FF3003E2\r
+0AFE1450100300A0E121FFFFEB18305BE50300A0E1\r
+0AFE1460101EFFFFEB0A00A0E3F6FEFFEB0D00A0E3\r
+0AFE147010F4FEFFEBE6FEFFEB0030A0E1FF3003E2\r
+0AFE148010000053E30000001A020000EA03FFFFEB\r
+0AFE1490102D004BE5F6FFFFEAF4009FE5250200EB\r
+0AFE14A010FEFEFFEB2D004BE5CD0000EBC00000EB\r
+0AFE14B010E0009FE51F0200EB18301BE528300BE5\r
+0AFE14C01014301BE52C300BE52C001BE5100100EB\r
+0AFE14D01028301BE5013643E228300BE52C301BE5\r
+0AFE14E010013683E22C300BE528301BE5000053E3\r
+0AFE14F010F4FFFFCAAE0000EB14001BE518101BE5\r
+0AFE15001049FFFFEB0030A0E1FF3003E2000053E3\r
+0AFE151010E6FFFF0A80009FE5060200EB10001BE5\r
+0AFE15201014101BE518201BE5D00000EB10001BE5\r
+0AFE15301014101BE518201BE50FFFFFEB0030A0E1\r
+0AFE154010FF3003E2000053E30200000A4C009FE5\r
+0AFE155010F80100EB010000EA44009FE5F50100EB\r
+0AFE156010930000EB3C009FE5F20100EB0000A0E3\r
+0AFE157010A4FEFFEB0030A0E30300A0E100A81BE9\r
+0AFE158010A01DFE0AA41DFE0AE01DFE0A0C1EFE0A\r
+0AFE159010381EFE0A641EFE0A181FFE0A281FFE0A\r
+0AFE15A0103C1FFE0A481FFE0AB41EFE0A0DC0A0E1\r
+0AFE15B01000D82DE904B04CE204D04DE210000BE5\r
+0AFE15C01010301BE5013043E210300BE5010073E3\r
+0AFE15D010FAFFFF1A00A81BE90DC0A0E100D82DE9\r
+0AFE15E01004B04CE208D04DE210000BE510301BE5\r
+0AFE15F01014300BE514301BE50300A0E100A81BE9\r
+0AFE1600100DC0A0E100D82DE904B04CE204D04DE2\r
+0AFE1610102228A0E3012A82E2042082E2E134A0E3\r
+0AFE162010023883E2033C83E2003082E50333A0E3\r
+0AFE163010053983E2003093E510300BE500A81BE9\r
+0AFE1640100DC0A0E100D82DE904B04CE204D04DE2\r
+0AFE1650102228A0E3012A82E2042082E29134A0E3\r
+0AFE166010023883E2033C83E2003082E5C136A0E3\r
+0AFE167010003093E510300BE52228A0E3012A82E2\r
+0AFE168010042082E2E134A0E3023883E2033C83E2\r
+0AFE169010003082E50333A0E3073983E20020A0E3\r
+0AFE16A010002083E52228A0E3012A82E2042082E2\r
+0AFE16B0108134A0E3023883E2033C83E2003082E5\r
+0AFE16C0100333A0E3003093E510300BE5CBFFFFEB\r
+0AFE16D01010301BE50300A0E100A81BE90DC0A0E1\r
+0AFE16E01000D82DE904B04CE208D04DE2D3FFFFEB\r
+0AFE16F0100030A0E110300BE510301BE5023503E2\r
+0AFE170010000053E30500000A10301BE5073703E2\r
+0AFE171010000053E30100000A10001BE5ADFFFFEB\r
+0AFE17201010301BE5803003E2000053E30500000A\r
+0AFE17301010301BE51C3003E2000053E30100000A\r
+0AFE17401010001BE5A3FFFFEB10201BE50235A0E3\r
+0AFE175010803083E2030052E10200001A0130A0E3\r
+0AFE17601014300BE5010000EA0030A0E314300BE5\r
+0AFE17701014001BE500A81BE90DC0A0E100D82DE9\r
+0AFE17801004B04CE204D04DE22228A0E3012A82E2\r
+0AFE179010042082E29134A0E3023883E2033C83E2\r
+0AFE17A010003082E5C136A0E3003093E510300BE5\r
+0AFE17B01000A81BE90DC0A0E100D82DE904B04CE2\r
+0AFE17C010ECFFFFEB2228A0E3012A82E2042082E2\r
+0AFE17D0108134A0E3023883E2033C83E2003082E5\r
+0AFE17E01000A81BE90DC0A0E100D82DE904B04CE2\r
+0AFE17F01004D04DE22228A0E3012A82E2042082E2\r
+0AFE1800102238A0E3013A83E2043083E2003093E5\r
+0AFE181010023183E3003082E52228A0E3012A82E2\r
+0AFE1820102238A0E3013A83E2003093E5023183E3\r
+0AFE183010003082E5FA0FA0E35BFFFFEB2228A0E3\r
+0AFE184010012A82E2042082E2B134A0E3023883E2\r
+0AFE185010033C83E2003082E50333A0E3233983E2\r
+0AFE186010033B83E2003093E510300BE500A81BE9\r
+0AFE1870100DC0A0E100D82DE904B04CE21CD04DE2\r
+0AFE18801010000BE514100BE518200BE50030A0E3\r
+0AFE1890101C300BE51C201BE518301BE5030052E1\r
+0AFE18A0100000003A190000EAB2FFFFEB2228A0E3\r
+0AFE18B010012A82E2042082E2F134A0E3023883E2\r
+0AFE18C010033C83E2003082E514201BE51C301BE5\r
+0AFE18D010031082E010201BE51C301BE5033082E0\r
+0AFE18E010003093E5003081E57BFFFFEB0030A0E1\r
+0AFE18F010FF3003E2000053E3FAFFFF0AACFFFFEB\r
+0AFE1900101C301BE5043083E21C300BE5E0FFFFEA\r
+0AFE19101000A81BE90DC0A0E100D82DE904B04CE2\r
+0AFE1920100CD04DE210000BE52228A0E3012A82E2\r
+0AFE193010042082E28134A0E3023883E2033C83E2\r
+0AFE194010003082E510301BE5003093E514300BE5\r
+0AFE1950102228A0E3012A82E2042082E29134A0E3\r
+0AFE196010023883E2033C83E2003082E510301BE5\r
+0AFE197010003093E518300BE52228A0E3012A82E2\r
+0AFE198010042082E2E134A0E3023883E2033C83E2\r
+0AFE199010003082E50229A0E310301BE5032082E0\r
+0AFE19A0100030A0E3003082E52228A0E3012A82E2\r
+0AFE19B010042082E28134A0E3023883E2033C83E2\r
+0AFE19C010003082E510201BE50D3AA0E3D03083E2\r
+0AFE19D010033883E1003082E53FFFFFEB0030A0E1\r
+0AFE19E010FF3003E2000053E3FAFFFF0A70FFFFEB\r
+0AFE19F01000A81BE90DC0A0E100D82DE904B04CE2\r
+0AFE1A00105CFFFFEB2228A0E3012A82E2042082E2\r
+0AFE1A1010E134A0E3023883E2033C83E2003082E5\r
+0AFE1A20100333A0E3033983E20020A0E3002083E5\r
+0AFE1A30102228A0E3012A82E2042082E28134A0E3\r
+0AFE1A4010023883E2033C83E2003082E50323A0E3\r
+0AFE1A5010032982E20339A0E3C03083E2033883E1\r
+0AFE1A6010003082E500A81BE90DC0A0E100D82DE9\r
+0AFE1A701004B04CE23FFFFFEB2228A0E3012A82E2\r
+0AFE1A8010042082E2E134A0E3023883E2033C83E2\r
+0AFE1A9010003082E50333A0E30A3983E20020A0E3\r
+0AFE1AA010002083E52228A0E3012A82E2042082E2\r
+0AFE1AB0108134A0E3023883E2033C83E2003082E5\r
+0AFE1AC0100323A0E30A2982E20339A0E3C03083E2\r
+0AFE1AD010033883E1003082E500A81BE90DC0A0E1\r
+0AFE1AE01000D82DE904B04CE28729A0E3222E82E2\r
+0AFE1AF0108739A0E3223E83E2003093E51E3CC3E3\r
+0AFE1B0010003082E58729A0E38E2F82E28739A0E3\r
+0AFE1B10108E3F83E2003093E51E3CC3E3003082E5\r
+0AFE1B20108139A0E3823D83E20520A0E3002083E5\r
+0AFE1B30108129A0E3822D82E2042082E20139A0E3\r
+0AFE1B4010273083E2003082E58139A0E3823D83E2\r
+0AFE1B50100C3083E20120A0E3002083E58129A0E3\r
+0AFE1B6010822D82E2102082E22A3DA0E3013083E2\r
+0AFE1B7010003082E58139A0E3823D83E2243083E2\r
+0AFE1B80100F20A0E3002083E58139A0E3823D83E2\r
+0AFE1B9010283083E28A20A0E3002083E58139A0E3\r
+0AFE1BA010823D83E22C3083E20820A0E3002083E5\r
+0AFE1BB01000A81BE90DC0A0E100D82DE904B04CE2\r
+0AFE1BC0108139A0E3823D83E2183083E2003093E5\r
+0AFE1BD010013003E2FF3003E20300A0E100A81BE9\r
+0AFE1BE0100DC0A0E100D82DE904B04CE204D04DE2\r
+0AFE1BF0100030A0E10D304BE58139A0E3823D83E2\r
+0AFE1C0010183083E2003093E5013903E2000053E3\r
+0AFE1C1010F8FFFF0A8139A0E3813D83E20D205BE5\r
+0AFE1C2010002083E50D305BE50A0053E30A00001A\r
+0AFE1C30108139A0E3823D83E2183083E2003093E5\r
+0AFE1C4010013903E2000053E3F8FFFF0A8139A0E3\r
+0AFE1C5010813D83E20D20A0E3002083E500A81BE9\r
+0AFE1C60100DC0A0E100D82DE904B04CE20000A0E1\r
+0AFE1C7010CFFFFFEB0030A0E1FF3003E2000053E3\r
+0AFE1C8010FAFFFF0A8139A0E3023A83E2003093E5\r
+0AFE1C9010FF3003E20300A0E100A81BE90DC0A0E1\r
+0AFE1CA01000D82DE904B04CE204D04DE20030A0E1\r
+0AFE1CB0100D304BE50D305BE52332A0E10E304BE5\r
+0AFE1CC0100E305BE5090053E30300009A0E305BE5\r
+0AFE1CD010373083E20E304BE5020000EA0E305BE5\r
+0AFE1CE010303083E20E304BE50E305BE50300A0E1\r
+0AFE1CF010BAFFFFEB0D305BE50F3003E20E304BE5\r
+0AFE1D00100E305BE5090053E30300009A0E305BE5\r
+0AFE1D1010373083E20E304BE5020000EA0E305BE5\r
+0AFE1D2010303083E20E304BE50E305BE50300A0E1\r
+0AFE1D3010AAFFFFEB00A81BE90DC0A0E100D82DE9\r
+0AFE1D401004B04CE204D04DE210000BE510301BE5\r
+0AFE1D50100030D3E5000053E30000001A080000EA\r
+0AFE1D601010104BE2003091E50320A0E10020D2E5\r
+0AFE1D7010013083E2003081E50200A0E197FFFFEB\r
+0AFE1D8008F1FFFFEA00A81BE9\r
+0AFE1DA4100A0D4D58314144532053796E632D666C\r
+0AFE1DB4106173682050726F6772616D6D696E6720\r
+0AFE1DC4105574696C6974792076302E3520323030\r
+0AFE1DD410322F30382F32310A0D000000536F7572\r
+0AFE1DE41063652061646472657373202873746F72\r
+0AFE1DF410656420696E2030783041464530303030\r
+0AFE1E0410293A2030780000005461726765742061\r
+0AFE1E1410646472657373202873746F7265642069\r
+0AFE1E24106E2030783041464530303034293A2030\r
+0AFE1E34107800000053697A652020202020202020\r
+0AFE1E44102020202873746F72656420696E203078\r
+0AFE1E54103041464530303038293A203078000000\r
+0AFE1E6410507265737320616E79206B657920746F\r
+0AFE1E74102073746172742070726F6772616D6D69\r
+0AFE1E84106E67202E2E2E00000A0D45726173696E\r
+0AFE1E94106720666C617368202E2E2E000A0D5072\r
+0AFE1EA4106F6772616D6D696E67202E2E2E000000\r
+0AFE1EB4100A0D50726F6772616D6D696E67206669\r
+0AFE1EC4106E69736865642E0A0D50726573732027\r
+0AFE1ED410612720746F20636F6E74696E7565202E\r
+0AFE1EE4102E2E2E000A0D566572696679696E6720\r
+0AFE1EF410666C617368202E2E2E0000000A0D426C\r
+0AFE1F0410616E6B20636865636B696E67202E2E2E\r
+0AFE1F1410000000000A45726173696E67202E2E2E\r
+0AFE1F2410000000000A50726F6772616D6D696E67\r
+0AFE1F3410202E2E2E000000002073756363656564\r
+0AFE1F44102E0A0000206661696C656420210A0000\r
+0AFE100000\r
+\r"
+}
+
+#########################################################
+
+if [ "$#" -eq 2 ] ; then
+ output_init > $2
+ output_uboot >> $2
+ output_flashprog >> $2
+else
+ output_init;
+ output_uboot;
+ output_flashprog;
+fi
projects / project / bcm63xx / u-boot.git / commitdiff