#include <mach/mmc.h>
#include <mach/gpio.h>
-#ifdef CONFIG_MMC_OMAP
-static int slot_cover_open;
-static struct device *mmc_device;
-
-static int h2_mmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
-#ifdef CONFIG_MMC_DEBUG
- dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
- power_on ? "on" : "off", vdd);
-#endif
- if (slot != 0) {
- dev_err(dev, "No such slot %d\n", slot + 1);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int h2_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
-{
-#ifdef CONFIG_MMC_DEBUG
- dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
- bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-#endif
- if (slot != 0) {
- dev_err(dev, "No such slot %d\n", slot + 1);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int h2_mmc_get_cover_state(struct device *dev, int slot)
-{
- BUG_ON(slot != 0);
-
- return slot_cover_open;
-}
-
-void h2_mmc_slot_cover_handler(void *arg, int state)
-{
- if (mmc_device == NULL)
- return;
-
- slot_cover_open = state;
- omap_mmc_notify_cover_event(mmc_device, 0, state);
-}
-
-static int h2_mmc_late_init(struct device *dev)
-{
- int ret = 0;
-
- mmc_device = dev;
-
- return ret;
-}
-
-static void h2_mmc_cleanup(struct device *dev)
-{
-}
-
-static struct omap_mmc_platform_data h2_mmc_data = {
- .nr_slots = 1,
- .switch_slot = NULL,
- .init = h2_mmc_late_init,
- .cleanup = h2_mmc_cleanup,
- .slots[0] = {
- .set_power = h2_mmc_set_power,
- .set_bus_mode = h2_mmc_set_bus_mode,
- .get_ro = NULL,
- .get_cover_state = h2_mmc_get_cover_state,
- .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
- .name = "mmcblk",
- },
-};
-
-void __init h2_mmc_init(void)
-{
- omap_set_mmc_info(1, &h2_mmc_data);
-}
-
-#else
-
void __init h2_mmc_init(void)
{
}
void h2_mmc_slot_cover_handler(void *arg, int state)
{
}
-#endif
.pins[1] = 3,
};
-static struct omap_mmc_config h2_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .wire4 = 1,
- },
-};
-
-extern struct omap_mmc_platform_data h2_mmc_data;
-
static struct omap_uart_config h2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_USB, &h2_usb_config },
- { OMAP_TAG_MMC, &h2_mmc_config },
{ OMAP_TAG_UART, &h2_uart_config },
{ OMAP_TAG_LCD, &h2_lcd_config },
};
#include <mach/mmc.h>
#include <mach/gpio.h>
-#ifdef CONFIG_MMC_OMAP
-static int slot_cover_open;
-static struct device *mmc_device;
-
-static int h3_mmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
-#ifdef CONFIG_MMC_DEBUG
- dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
- power_on ? "on" : "off", vdd);
-#endif
- if (slot != 0) {
- dev_err(dev, "No such slot %d\n", slot + 1);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int h3_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
-{
- int ret = 0;
-
-#ifdef CONFIG_MMC_DEBUG
- dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
- bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-#endif
- if (slot != 0) {
- dev_err(dev, "No such slot %d\n", slot + 1);
- return -ENODEV;
- }
-
- /* Treated on upper level */
-
- return bus_mode;
-}
-
-static int h3_mmc_get_cover_state(struct device *dev, int slot)
-{
- BUG_ON(slot != 0);
-
- return slot_cover_open;
-}
-
-void h3_mmc_slot_cover_handler(void *arg, int state)
-{
- if (mmc_device == NULL)
- return;
-
- slot_cover_open = state;
- omap_mmc_notify_cover_event(mmc_device, 0, state);
-}
-
-static int h3_mmc_late_init(struct device *dev)
-{
- int ret = 0;
-
- mmc_device = dev;
-
- return ret;
-}
-
-static void h3_mmc_cleanup(struct device *dev)
-{
-}
-
-static struct omap_mmc_platform_data h3_mmc_data = {
- .nr_slots = 1,
- .switch_slot = NULL,
- .init = h3_mmc_late_init,
- .cleanup = h3_mmc_cleanup,
- .slots[0] = {
- .set_power = h3_mmc_set_power,
- .set_bus_mode = h3_mmc_set_bus_mode,
- .get_ro = NULL,
- .get_cover_state = h3_mmc_get_cover_state,
- .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
- .name = "mmcblk",
- },
-};
-
-void __init h3_mmc_init(void)
-{
- omap_set_mmc_info(1, &h3_mmc_data);
-}
-
-#else
-
void __init h3_mmc_init(void)
{
}
void h3_mmc_slot_cover_handler(void *arg, int state)
{
}
-#endif
.pins[1] = 3,
};
-static struct omap_mmc_config h3_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .wire4 = 1,
- },
-};
-
-extern struct omap_mmc_platform_data h3_mmc_data;
-
static struct omap_uart_config h3_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel h3_config[] __initdata = {
{ OMAP_TAG_USB, &h3_usb_config },
- { OMAP_TAG_MMC, &h3_mmc_config },
{ OMAP_TAG_UART, &h3_uart_config },
{ OMAP_TAG_LCD, &h3_lcd_config },
};
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_USB, &palmte_usb_config },
- { OMAP_TAG_MMC, &palmte_mmc_config },
{ OMAP_TAG_LCD, &palmte_lcd_config },
{ OMAP_TAG_UART, &palmte_uart_config },
};
.pins[0] = 2,
};
-static struct omap_mmc_config palmz71_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .wire4 = 0,
- .wp_pin = PALMZ71_MMC_WP_GPIO,
- .power_pin = -1,
- .switch_pin = PALMZ71_MMC_IN_GPIO,
- },
-};
-
static struct omap_lcd_config palmz71_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel palmz71_config[] __initdata = {
{OMAP_TAG_USB, &palmz71_usb_config},
- {OMAP_TAG_MMC, &palmz71_mmc_config},
{OMAP_TAG_LCD, &palmz71_lcd_config},
{OMAP_TAG_UART, &palmz71_uart_config},
};
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
}
-static int sx1_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
-{
-#ifdef CONFIG_MMC_DEBUG
- dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
- bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-#endif
- if (slot != 0) {
- dev_err(dev, "No such slot %d\n", slot + 1);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int sx1_mmc_get_cover_state(struct device *dev, int slot)
-{
- BUG_ON(slot != 0);
-
- return slot_cover_open;
-}
-
-void sx1_mmc_slot_cover_handler(void *arg, int state)
-{
- if (mmc_device == NULL)
- return;
-
- slot_cover_open = state;
- omap_mmc_notify_cover_event(mmc_device, 0, state);
-}
-
-static int sx1_mmc_late_init(struct device *dev)
-{
- int ret = 0;
-
- mmc_device = dev;
-
- return ret;
-}
-
-static void sx1_mmc_cleanup(struct device *dev)
-{
-}
-
static struct omap_mmc_platform_data sx1_mmc_data = {
.nr_slots = 1,
- .switch_slot = NULL,
- .init = sx1_mmc_late_init,
- .cleanup = sx1_mmc_cleanup,
.slots[0] = {
.set_power = sx1_mmc_set_power,
- .set_bus_mode = sx1_mmc_set_bus_mode,
- .get_ro = NULL,
- .get_cover_state = sx1_mmc_get_cover_state,
.ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
.pins[2] = 0,
};
-/*----------- MMC -------------------------*/
-
-static struct omap_mmc_config sx1_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 0,
- },
-};
-
/*----------- LCD -------------------------*/
static struct platform_device sx1_lcd_device = {
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_USB, &sx1_usb_config },
- { OMAP_TAG_MMC, &sx1_mmc_config },
{ OMAP_TAG_LCD, &sx1_lcd_config },
{ OMAP_TAG_UART, &sx1_uart_config },
};
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
.pins[2] = 6,
};
-static struct omap_mmc_config voiceblue_mmc_config __initdata = {
- .mmc[0] = {
- .enabled = 1,
- .power_pin = 2,
- .switch_pin = -1,
- },
-};
-
static struct omap_uart_config voiceblue_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel voiceblue_config[] = {
{ OMAP_TAG_USB, &voiceblue_usb_config },
- { OMAP_TAG_MMC, &voiceblue_mmc_config },
{ OMAP_TAG_UART, &voiceblue_uart_config },
};
.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
};
-static struct omap_mmc_config apollon_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 1,
- .wp_pin = -1,
- .power_pin = -1,
- .switch_pin = -1,
- },
-};
-
static struct omap_usb_config apollon_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */
static struct omap_board_config_kernel apollon_config[] = {
{ OMAP_TAG_UART, &apollon_uart_config },
- { OMAP_TAG_MMC, &apollon_mmc_config },
{ OMAP_TAG_USB, &apollon_usb_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
-static struct omap_mmc_config generic_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 0,
- .wire4 = 0,
- .wp_pin = -1,
- .power_pin = -1,
- .switch_pin = -1,
- },
-};
-
static struct omap_board_config_kernel generic_config[] = {
{ OMAP_TAG_UART, &generic_uart_config },
- { OMAP_TAG_MMC, &generic_mmc_config },
};
static void __init omap_generic_init(void)
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
-static struct omap_mmc_config h4_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 1,
- .wp_pin = -1,
- .power_pin = -1,
- .switch_pin = -1,
- },
-};
-
static struct omap_lcd_config h4_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h4_config[] = {
{ OMAP_TAG_UART, &h4_uart_config },
- { OMAP_TAG_MMC, &h4_mmc_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
};