Substituted/moved/removed macro's.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
#define WLC_PHY_TYPE_LCN 8
#define WLC_PHY_TYPE_NULL 0xf
-#define BRCMF_PKT_FILTER_FIXED_LEN offsetof(struct brcmf_pkt_filter, u)
-#define BRCMF_PKT_FILTER_PATTERN_FIXED_LEN \
- offsetof(struct brcmf_pkt_filter_pattern, mask_and_pattern)
-
#define BRCMF_EVENTING_MASK_LEN 16
#define TOE_TX_CSUM_OL 0x00000001
/* list of chanspecs */
u16 chanspec_list[1];
};
-#define BRCMF_ASSOC_PARAMS_FIXED_SIZE \
- (sizeof(struct brcmf_assoc_params) - sizeof(u16))
/* used for join with or without a specific bssid and channel list */
struct brcmf_join_params {
return ret;
}
-#define PKTSUMNEEDED(skb) \
- (((struct sk_buff *)(skb))->ip_summed == CHECKSUM_PARTIAL)
-#define PKTSETSUMGOOD(skb, x) \
- (((struct sk_buff *)(skb))->ip_summed = \
- ((x) ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE))
+static bool pkt_sum_needed(struct sk_buff *skb)
+{
+ return skb->ip_summed == CHECKSUM_PARTIAL;
+}
+
+static void pkt_set_sum_good(struct sk_buff *skb, bool x)
+{
+ skb->ip_summed = (x ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE);
+}
void brcmf_proto_dump(struct brcmf_pub *drvr, struct brcmu_strbuf *strbuf)
{
h = (struct brcmf_proto_bdc_header *)(pktbuf->data);
h->flags = (BDC_PROTO_VER << BDC_FLAG_VER_SHIFT);
- if (PKTSUMNEEDED(pktbuf))
+ if (pkt_sum_needed(pktbuf))
h->flags |= BDC_FLAG_SUM_NEEDED;
h->priority = (pktbuf->priority & BDC_PRIORITY_MASK);
if (h->flags & BDC_FLAG_SUM_GOOD) {
brcmf_dbg(INFO, "%s: BDC packet received with good rx-csum, flags 0x%x\n",
brcmf_ifname(drvr, *ifidx), h->flags);
- PKTSETSUMGOOD(pktbuf, true);
+ pkt_set_sum_good(pktbuf, true);
}
pktbuf->priority = h->priority & BDC_PRIORITY_MASK;
#define MSGTRACE_VERSION 1
+#define BRCMF_PKT_FILTER_FIXED_LEN offsetof(struct brcmf_pkt_filter, u)
+#define BRCMF_PKT_FILTER_PATTERN_FIXED_LEN \
+ offsetof(struct brcmf_pkt_filter_pattern, mask_and_pattern)
+
#ifdef BCMDBG
static const char brcmf_version[] =
"Dongle Host Driver, version " BRCMF_VERSION_STR "\nCompiled on "
#define SDPCM_GLOMDESC(p) (((u8 *)p)[1] & 0x80)
-/* For TEST_CHANNEL packets, define another 4-byte header */
-#define SDPCM_TEST_HDRLEN 4 /*
- * Generally: Cmd(1), Ext(1), Len(2);
- * Semantics of Ext byte depend on
- * command. Len is current or requested
- * frame length, not including test
- * header; sent little-endian.
- */
-#define SDPCM_TEST_DISCARD 0x01 /* Receiver discards. Ext:pattern id. */
-#define SDPCM_TEST_ECHOREQ 0x02 /* Echo request. Ext:pattern id. */
-#define SDPCM_TEST_ECHORSP 0x03 /* Echo response. Ext:pattern id. */
-#define SDPCM_TEST_BURST 0x04 /*
- * Receiver to send a burst.
- * Ext is a frame count
- */
-#define SDPCM_TEST_SEND 0x05 /*
- * Receiver sets send mode.
- * Ext is boolean on/off
- */
-
-/* Handy macro for filling in datagen packets with a pattern */
-#define SDPCM_TEST_FILL(byteno, id) ((u8)(id + byteno))
-
/*
* Shared structure between dongle and the host.
* The structure contains pointers to trap or assert information.
#define SDPCM_SHARED_ASSERT 0x0200
#define SDPCM_SHARED_TRAP 0x0400
-
/* Space for header read, limit for data packets */
#define MAX_HDR_READ (1 << 6)
#define MAX_RX_DATASZ 2048
/*
* Conversion of 802.1D priority to precedence level
*/
-#define PRIO2PREC(prio) \
- (((prio) == PRIO_8021D_NONE || (prio) == PRIO_8021D_BE) ? \
- ((prio^2)) : (prio))
+static uint prio2prec(u32 prio)
+{
+ return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ?
+ (prio^2) : prio;
+}
/*
* Core reg address translation.
#define ALIGNMENT 4
-#define PKTALIGN(_p, _len, _align) \
- do { \
- uint datalign; \
- datalign = (unsigned long)((_p)->data); \
- datalign = roundup(datalign, (_align)) - datalign; \
- if (datalign) \
- skb_pull((_p), datalign); \
- __skb_trim((_p), (_len)); \
- } while (0)
+static void pkt_align(struct sk_buff *p, int len, int align)
+{
+ uint datalign;
+ datalign = (unsigned long)(p->data);
+ datalign = roundup(datalign, (align)) - datalign;
+ if (datalign)
+ skb_pull(p, datalign);
+ __skb_trim(p, len);
+}
/* Limit on rounding up frames */
static const uint max_roundup = 512;
static bool brcmf_readahead;
/* To check if there's window offered */
-#define DATAOK(bus) \
- (((u8)(bus->tx_max - bus->tx_seq) != 0) && \
- (((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0))
+static bool data_ok(struct brcmf_bus *bus)
+{
+ return (u8)(bus->tx_max - bus->tx_seq) != 0 &&
+ ((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0;
+}
/*
* Reads a register in the SDIO hardware block. This block occupies a series of
return 0;
}
-#define BUS_WAKE(bus) \
- do { \
- if ((bus)->sleeping) \
- brcmf_sdbrcm_bussleep((bus), false); \
- } while (0);
+static void bus_wake(struct brcmf_bus *bus)
+{
+ if (bus->sleeping)
+ brcmf_sdbrcm_bussleep(bus, false);
+}
/* Writes a HW/SW header into the packet and sends it. */
/* Assumes: (a) header space already there, (b) caller holds lock */
goto done;
}
- PKTALIGN(new, pkt->len, BRCMF_SDALIGN);
+ pkt_align(new, pkt->len, BRCMF_SDALIGN);
memcpy(new->data, pkt->data, pkt->len);
if (free_pkt)
brcmu_pkt_buf_free_skb(pkt);
skb_push(pkt, SDPCM_HDRLEN);
/* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */
- prec = PRIO2PREC((pkt->priority & PRIOMASK));
+ prec = prio2prec((pkt->priority & PRIOMASK));
/* Check for existing queue, current flow-control,
pending event, or pending clock */
if (brcmf_deferred_tx || bus->fcstate || pktq_len(&bus->txq)
- || bus->dpc_sched || (!DATAOK(bus))
+ || bus->dpc_sched || (!data_ok(bus))
|| (bus->flowcontrol & NBITVAL(prec))
|| (bus->clkstate != CLK_AVAIL)) {
brcmf_dbg(TRACE, "deferring pktq len %d\n",
brcmf_sdbrcm_sdlock(bus);
/* Otherwise, send it now */
- BUS_WAKE(bus);
+ bus_wake(bus);
/* Make sure back plane ht clk is on, no pending allowed */
brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, true);
tx_prec_map = ~bus->flowcontrol;
/* Send frames until the limit or some other event */
- for (cnt = 0; (cnt < maxframes) && DATAOK(bus); cnt++) {
+ for (cnt = 0; (cnt < maxframes) && data_ok(bus); cnt++) {
spin_lock_bh(&bus->txqlock);
pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, &prec_out);
if (pkt == NULL) {
/* Need to lock here to protect txseq and SDIO tx calls */
brcmf_sdbrcm_sdlock(bus);
- BUS_WAKE(bus);
+ bus_wake(bus);
/* Make sure backplane clock is on */
brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
put_unaligned_le32(swheader, frame + SDPCM_FRAMETAG_LEN);
put_unaligned_le32(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
- if (!DATAOK(bus)) {
+ if (!data_ok(bus)) {
brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
bus->tx_max, bus->tx_seq);
bus->ctrl_frame_stat = true;
/* Request clock to allow SDIO accesses */
if (!bus->drvr->dongle_reset) {
- BUS_WAKE(bus);
+ bus_wake(bus);
brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
}
if (vi == NULL) {
brcmf_sdbrcm_sdlock(bus);
- BUS_WAKE(bus);
+ bus_wake(bus);
/* Turn on clock in case SD command needs backplane */
brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
if (enforce_mutex)
brcmf_sdbrcm_sdlock(bus);
- BUS_WAKE(bus);
+ bus_wake(bus);
/* Enable clock for device interrupts */
brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
}
/* Adhere to start alignment requirements */
- PKTALIGN(pnext, sublen, BRCMF_SDALIGN);
+ pkt_align(pnext, sublen, BRCMF_SDALIGN);
}
/* If all allocations succeeded, save packet chain
len, rdlen, rxseq);
continue;
} else {
- PKTALIGN(pkt, rdlen, BRCMF_SDALIGN);
+ pkt_align(pkt, rdlen, BRCMF_SDALIGN);
rxbuf = (u8 *) (pkt->data);
/* Read the entire frame */
sdret = brcmf_sdcard_recv_buf(bus->sdiodev,
/* Leave room for what we already read, and align remainder */
skb_pull(pkt, firstread);
- PKTALIGN(pkt, rdlen, BRCMF_SDALIGN);
+ pkt_align(pkt, rdlen, BRCMF_SDALIGN);
/* Read the remaining frame data */
sdret = brcmf_sdcard_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
}
}
- BUS_WAKE(bus);
+ bus_wake(bus);
/* Make sure backplane clock is on */
brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, true);
bus->intstatus = intstatus;
clkwait:
- if (DATAOK(bus) && bus->ctrl_frame_stat &&
+ if (data_ok(bus) && bus->ctrl_frame_stat &&
(bus->clkstate == CLK_AVAIL)) {
int ret, i;
/* Send queued frames (limit 1 if rx may still be pending) */
else if ((bus->clkstate == CLK_AVAIL) && !bus->fcstate &&
brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit
- && DATAOK(bus)) {
+ && data_ok(bus)) {
framecnt = rxdone ? txlimit : min(txlimit, brcmf_txminmax);
framecnt = brcmf_sdbrcm_sendfromq(bus, framecnt);
txlimit -= framecnt;
resched = true;
} else if (bus->intstatus || bus->ipend ||
(!bus->fcstate && brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)
- && DATAOK(bus)) || PKT_AVAILABLE()) {
+ && data_ok(bus)) || PKT_AVAILABLE()) {
resched = true;
}
}
/* Request clock to allow SDIO accesses */
- BUS_WAKE(bus);
+ bus_wake(bus);
/* No pend allowed since txpkt is called later, ht clk has to be on */
brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
/* Async request (vs. sync request) */
#define SDIO_REQ_ASYNC 0x4
-/* Pending (non-error) return code */
-#define BCME_PENDING 1
-
/* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
* rw: read or write (0/1)
* addr: direct SDIO address
#include "dhd.h"
#include "wl_cfg80211.h"
+#define BRCMF_ASSOC_PARAMS_FIXED_SIZE \
+ (sizeof(struct brcmf_assoc_params) - sizeof(u16))
+
static struct sdio_func *cfg80211_sdio_func;
static struct brcmf_cfg80211_dev *cfg80211_dev;
static const u8 ether_bcast[ETH_ALEN] = {255, 255, 255, 255, 255, 255};
brcmf_debugfs_add_netdev_params(struct brcmf_cfg80211_priv *cfg_priv);
static void brcmf_debugfs_remove_netdev(struct brcmf_cfg80211_priv *cfg_priv);
-#define WL_PRIV_GET() \
- ({ \
- struct brcmf_cfg80211_iface *ci = brcmf_get_drvdata(cfg80211_dev); \
- if (unlikely(!ci)) { \
- WL_ERR("wl_cfg80211_dev is unavailable\n"); \
- BUG(); \
- } \
- ci->cfg_priv; \
-})
-
-#define CHECK_SYS_UP() \
-do { \
- struct brcmf_cfg80211_priv *cfg_priv = wiphy_to_cfg(wiphy); \
- if (unlikely(!test_bit(WL_STATUS_READY, &cfg_priv->status))) { \
- WL_INFO("device is not ready : status (%d)\n", \
- (int)cfg_priv->status); \
- return -EIO; \
- } \
-} while (0)
+static struct brcmf_cfg80211_priv *brcmf_priv_get(void)
+{
+ struct brcmf_cfg80211_iface *ci = brcmf_get_drvdata(cfg80211_dev);
+ return ci->cfg_priv;
+}
+
+static bool check_sys_up(struct wiphy *wiphy)
+{
+ struct brcmf_cfg80211_priv *cfg_priv = wiphy_to_cfg(wiphy);
+ if (!test_bit(WL_STATUS_READY, &cfg_priv->status)) {
+ WL_INFO("device is not ready : status (%d)\n",
+ (int)cfg_priv->status);
+ return false;
+ }
+ return true;
+}
#define CHAN2G(_channel, _freq, _flags) { \
.band = IEEE80211_BAND_2GHZ, \
s32 err = 0;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
switch (type) {
case NL80211_IFTYPE_MONITOR:
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
err = __brcmf_cfg80211_scan(wiphy, ndev, request, NULL);
if (unlikely(err))
s32 err = 0;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
if (changed & WIPHY_PARAM_RTS_THRESHOLD &&
(cfg_priv->conf->rts_threshold != wiphy->rts_threshold)) {
s32 bcnprd;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
if (params->ssid)
WL_CONN("SSID: %s\n", params->ssid);
s32 err = 0;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
brcmf_link_down(cfg_priv);
s32 err = 0;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
if (unlikely(!sme->ssid)) {
WL_ERR("Invalid ssid\n");
s32 err = 0;
WL_TRACE("Enter. Reason code = %d\n", reason_code);
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
clear_bit(WL_STATUS_CONNECTED, &cfg_priv->status);
s32 disable = 0;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
switch (type) {
case NL80211_TX_POWER_AUTOMATIC:
s32 err = 0;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
err = brcmf_dev_intvar_get(ndev, "qtxpower", &txpwrdbm);
if (unlikely(err)) {
WL_TRACE("Enter\n");
WL_CONN("key index (%d)\n", key_idx);
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
err = brcmf_dev_ioctl(dev, BRCMF_C_GET_WSEC, &wsec, sizeof(wsec));
if (unlikely(err)) {
WL_TRACE("Enter\n");
WL_CONN("key index (%d)\n", key_idx);
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
if (mac_addr) {
WL_TRACE("Exit");
s32 wsec;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
+
memset(&key, 0, sizeof(key));
key.index = (u32) key_idx;
WL_TRACE("Enter\n");
WL_CONN("key index (%d)\n", key_idx);
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
memset(&key, 0, sizeof(key));
key.index = key_idx;
{
WL_INFO("Not supported\n");
- CHECK_SYS_UP();
return -EOPNOTSUPP;
}
u8 *bssid = brcmf_read_prof(cfg_priv, WL_PROF_BSSID);
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
if (unlikely
(memcmp(mac, bssid, ETH_ALEN))) {
s32 err = 0;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
/* addr param is always NULL. ignore it */
/* Get current rateset */
int i;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
for (i = 0; i < pmkids->npmkid; i++)
if (!memcmp(pmksa->bssid, pmkids->pmkid[i].BSSID, ETH_ALEN))
int i;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
+
memcpy(&pmkid.pmkid[0].BSSID, pmksa->bssid, ETH_ALEN);
memcpy(&pmkid.pmkid[0].PMKID, pmksa->pmkid, WLAN_PMKID_LEN);
s32 err = 0;
WL_TRACE("Enter\n");
- CHECK_SYS_UP();
+ if (!check_sys_up(wiphy))
+ return -EIO;
memset(cfg_priv->pmk_list, 0, sizeof(*cfg_priv->pmk_list));
err = brcmf_update_pmklist(dev, cfg_priv->pmk_list, err);
static void brcmf_free_wdev(struct brcmf_cfg80211_priv *cfg_priv)
{
- struct wireless_dev *wdev = cfg_to_wdev(cfg_priv);
+ struct wireless_dev *wdev = cfg_priv->wdev;
if (unlikely(!wdev)) {
WL_ERR("wdev is invalid\n");
wiphy_unregister(wdev->wiphy);
wiphy_free(wdev->wiphy);
kfree(wdev);
- cfg_to_wdev(cfg_priv) = NULL;
+ cfg_priv->wdev = NULL;
}
static s32 brcmf_inform_bss(struct brcmf_cfg80211_priv *cfg_priv)
{
struct brcmf_cfg80211_priv *cfg_priv;
- cfg_priv = WL_PRIV_GET();
+ cfg_priv = brcmf_priv_get();
wl_deinit_priv(cfg_priv);
brcmf_free_wdev(cfg_priv);
struct brcmf_cfg80211_priv *cfg_priv;
s32 err = 0;
- cfg_priv = WL_PRIV_GET();
+ cfg_priv = brcmf_priv_get();
mutex_lock(&cfg_priv->usr_sync);
err = __brcmf_cfg80211_up(cfg_priv);
mutex_unlock(&cfg_priv->usr_sync);
struct brcmf_cfg80211_priv *cfg_priv;
s32 err = 0;
- cfg_priv = WL_PRIV_GET();
+ cfg_priv = brcmf_priv_get();
mutex_lock(&cfg_priv->usr_sync);
err = __brcmf_cfg80211_down(cfg_priv);
mutex_unlock(&cfg_priv->usr_sync);
u8 ci[0] __aligned(NETDEV_ALIGN);
};
-#define cfg_to_wiphy(w) (w->wdev->wiphy)
-#define wiphy_to_cfg(w) ((struct brcmf_cfg80211_priv *)(wiphy_priv(w)))
-#define cfg_to_wdev(w) (w->wdev)
-#define wdev_to_cfg(w) ((struct brcmf_cfg80211_priv *)(wdev_priv(w)))
-#define cfg_to_ndev(w) (w->wdev->netdev)
-#define ndev_to_cfg(n) (wdev_to_cfg(n->ieee80211_ptr))
+static inline struct wiphy *cfg_to_wiphy(struct brcmf_cfg80211_priv *w)
+{
+ return w->wdev->wiphy;
+}
+
+static inline struct brcmf_cfg80211_priv *wiphy_to_cfg(struct wiphy *w)
+{
+ return (struct brcmf_cfg80211_priv *)(wiphy_priv(w));
+}
+
+static inline struct brcmf_cfg80211_priv *wdev_to_cfg(struct wireless_dev *wd)
+{
+ return (struct brcmf_cfg80211_priv *)(wdev_priv(wd));
+}
+
+static inline struct net_device *cfg_to_ndev(struct brcmf_cfg80211_priv *cfg)
+{
+ return cfg->wdev->netdev;
+}
+
+static inline struct brcmf_cfg80211_priv *ndev_to_cfg(struct net_device *ndev)
+{
+ return wdev_to_cfg(ndev->ieee80211_ptr);
+}
+
#define iscan_to_cfg(i) ((struct brcmf_cfg80211_priv *)(i->data))
#define cfg_to_iscan(w) (w->iscan)
-#define cfg_to_conn(w) (&w->conn_info)
+
+static inline struct
+brcmf_cfg80211_connect_info *cfg_to_conn(struct brcmf_cfg80211_priv *cfg)
+{
+ return &cfg->conn_info;
+}
static inline struct brcmf_bss_info *next_bss(struct brcmf_scan_results *list,
struct brcmf_bss_info *bss)
projects / openwrt / staging / blogic.git / commitdiff