Cleanup sound patch.

SVN-Revision: 16611

diff --git a/target/linux/s3c24xx/patches-2.6.30/010-s3c-dma.patch b/target/linux/s3c24xx/patches-2.6.30/010-s3c-dma.patch
index 3d31f27118f35326f054177c5c210e7f9a383733..871514a6e6697f2b5aabaef9eabbbf1d0b39c5eb 100644 (file)
--- a/target/linux/s3c24xx/patches-2.6.30/010-s3c-dma.patch
+++ b/target/linux/s3c24xx/patches-2.6.30/010-s3c-dma.patch
@@ -1288,3 +1288,36 @@
  #include <mach/regs-mem.h>
  #include <mach/regs-lcd.h>
  #include <mach/regs-sdi.h>
+--- a/sound/soc/s3c24xx/s3c24xx-pcm.c  2009-06-10 05:05:27.000000000 +0200
++++ b/sound/soc/s3c24xx/s3c24xx-pcm.c  2009-05-16 13:25:48.000000000 +0200
+@@ -218,23 +231,16 @@
+        * sync to pclk, half-word transfers to the IIS-FIFO. */
+       if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+               s3c2410_dma_devconfig(prtd->params->channel,
+-                              S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
+-                              S3C2410_DISRCC_APB, prtd->params->dma_addr);
+-
+-              s3c2410_dma_config(prtd->params->channel,
+-                              prtd->params->dma_size,
+-                              S3C2410_DCON_SYNC_PCLK |
+-                              S3C2410_DCON_HANDSHAKE);
++                                    S3C2410_DMASRC_MEM,
++                                    prtd->params->dma_addr);
+       } else {
+-              s3c2410_dma_config(prtd->params->channel,
+-                              prtd->params->dma_size,
+-                              S3C2410_DCON_HANDSHAKE |
+-                              S3C2410_DCON_SYNC_PCLK);
+-
+               s3c2410_dma_devconfig(prtd->params->channel,
+-                                      S3C2410_DMASRC_HW, 0x3,
+-                                      prtd->params->dma_addr);
++                                    S3C2410_DMASRC_HW,
++                                    prtd->params->dma_addr);
+       }
++
++      s3c2410_dma_config(prtd->params->channel,
++                         prtd->params->dma_size);
+ 
+       /* flush the DMA channel */
+       s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);

diff --git a/target/linux/s3c24xx/patches-2.6.30/058-gta02-wm8752.patch b/target/linux/s3c24xx/patches-2.6.30/058-gta02-wm8752.patch
new file mode 100644 (file)
index 0000000..d72f387
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/058-gta02-wm8752.patch
@@ -0,0 +1,37 @@
+--- a/sound/soc/s3c24xx/Kconfig
++++ b/sound/soc/s3c24xx/Kconfig
+@@ -42,10 +42,20 @@ config SND_S3C24XX_SOC_JIVE_WM8750
+       tristate "SoC I2S Audio support for Jive"
+       depends on SND_S3C24XX_SOC && MACH_JIVE
+       select SND_SOC_WM8750
++      select SND_SOC_WM8750_SPI
+       select SND_S3C2412_SOC_I2S
+       help
+         Sat Y if you want to add support for SoC audio on the Jive.
+ 
++config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
++      tristate "SoC I2S Audio support for Openmoko Freerunner - WM8753"
++      depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
++      select SND_S3C24XX_SOC_I2S
++      select SND_SOC_WM8753
++      help
++        Say Y if you want to add support for SoC audio on Openmoko Freerunner
++        with the WM8753 codec
++
+ config SND_S3C24XX_SOC_SMDK2443_WM9710
+       tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
+       depends on SND_S3C24XX_SOC && MACH_SMDK2443
+--- a/sound/soc/s3c24xx/Makefile
++++ b/sound/soc/s3c24xx/Makefile
+@@ -19,9 +19,11 @@ snd-soc-neo1973-wm8753-objs := neo1973_w
+ snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
+ snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
+ snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
++snd-soc-neo1973-gta02-wm8753-objs := gta02_wm8753.o
+ 
+ obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
++obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o

diff --git a/target/linux/s3c24xx/patches-2.6.30/090-sound.patch b/target/linux/s3c24xx/patches-2.6.30/090-sound.patch
deleted file mode 100644 (file)
index 2bfef44..0000000
--- a/target/linux/s3c24xx/patches-2.6.30/090-sound.patch
+++ /dev/null
@@ -1,142 +0,0 @@
---- a/sound/soc/s3c24xx/Kconfig
-+++ b/sound/soc/s3c24xx/Kconfig
-@@ -42,10 +42,20 @@ config SND_S3C24XX_SOC_JIVE_WM8750
-       tristate "SoC I2S Audio support for Jive"
-       depends on SND_S3C24XX_SOC && MACH_JIVE
-       select SND_SOC_WM8750
-+      select SND_SOC_WM8750_SPI
-       select SND_S3C2412_SOC_I2S
-       help
-         Sat Y if you want to add support for SoC audio on the Jive.
- 
-+config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
-+      tristate "SoC I2S Audio support for Openmoko Freerunner - WM8753"
-+      depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
-+      select SND_S3C24XX_SOC_I2S
-+      select SND_SOC_WM8753
-+      help
-+        Say Y if you want to add support for SoC audio on Openmoko Freerunner
-+        with the WM8753 codec
-+
- config SND_S3C24XX_SOC_SMDK2443_WM9710
-       tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
-       depends on SND_S3C24XX_SOC && MACH_SMDK2443
---- a/sound/soc/s3c24xx/Makefile
-+++ b/sound/soc/s3c24xx/Makefile
-@@ -19,9 +19,11 @@ snd-soc-neo1973-wm8753-objs := neo1973_w
- snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
- snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
- snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
-+snd-soc-neo1973-gta02-wm8753-objs := gta02_wm8753.o
- 
- obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
- obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
- obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
- obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
- obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
-+obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
---- a/sound/soc/s3c24xx/s3c24xx-i2s.c
-+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
-@@ -284,11 +284,14 @@ static int s3c24xx_i2s_trigger(struct sn
-       case SNDRV_PCM_TRIGGER_START:
-       case SNDRV_PCM_TRIGGER_RESUME:
-       case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
--              if (!s3c24xx_snd_is_clkmaster()) {
--                      ret = s3c24xx_snd_lrsync();
--                      if (ret)
--                              goto exit_err;
--              }
-+              if (!s3c24xx_snd_is_clkmaster())
-+                      /* we ignore the return code, if it sync'd then fine,
-+                       * if it didn't sync, which happens after resume the
-+                       * first time when there was a live stream at suspend,
-+                       * just let it timeout, the stream picks up OK after
-+                       * that and LRCK is evidently working again.
-+                       */
-+                      s3c24xx_snd_lrsync();
- 
-               if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-                       s3c24xx_snd_rxctrl(1);
-@@ -308,7 +311,6 @@ static int s3c24xx_i2s_trigger(struct sn
-               break;
-       }
- 
--exit_err:
-       return ret;
- }
- 
---- a/sound/soc/s3c24xx/s3c24xx-pcm.c
-+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
-@@ -75,11 +75,18 @@ static void s3c24xx_pcm_enqueue(struct s
- {
-       struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
-       dma_addr_t pos = prtd->dma_pos;
-+      unsigned int limit;
-       int ret;
- 
-       pr_debug("Entered %s\n", __func__);
- 
--      while (prtd->dma_loaded < prtd->dma_limit) {
-+      if (s3c_dma_has_circular()) {
-+              limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
-+      } else
-+              limit = prtd->dma_limit;
-+
-+
-+      while (prtd->dma_loaded < limit) {
-               unsigned long len = prtd->dma_period;
- 
-               pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
-@@ -123,7 +130,7 @@ static void s3c24xx_audio_buffdone(struc
-               snd_pcm_period_elapsed(substream);
- 
-       spin_lock(&prtd->lock);
--      if (prtd->state & ST_RUNNING) {
-+      if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
-               prtd->dma_loaded--;
-               s3c24xx_pcm_enqueue(substream);
-       }
-@@ -164,6 +171,11 @@ static int s3c24xx_pcm_hw_params(struct 
-                       printk(KERN_ERR "failed to get dma channel\n");
-                       return ret;
-               }
-+
-+              /* use the circular buffering if we have it available. */
-+              if (s3c_dma_has_circular())
-+                      s3c2410_dma_setflags(prtd->params->channel,
-+                                           S3C2410_DMAF_CIRCULAR);
-       }
- 
-       s3c2410_dma_set_buffdone_fn(prtd->params->channel,
-@@ -218,24 +230,17 @@ static int s3c24xx_pcm_prepare(struct sn
-        * sync to pclk, half-word transfers to the IIS-FIFO. */
-       if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-               s3c2410_dma_devconfig(prtd->params->channel,
--                              S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
--                              S3C2410_DISRCC_APB, prtd->params->dma_addr);
--
--              s3c2410_dma_config(prtd->params->channel,
--                              prtd->params->dma_size,
--                              S3C2410_DCON_SYNC_PCLK |
--                              S3C2410_DCON_HANDSHAKE);
-+                                    S3C2410_DMASRC_MEM,
-+                                    prtd->params->dma_addr);
-       } else {
--              s3c2410_dma_config(prtd->params->channel,
--                              prtd->params->dma_size,
--                              S3C2410_DCON_HANDSHAKE |
--                              S3C2410_DCON_SYNC_PCLK);
--
-               s3c2410_dma_devconfig(prtd->params->channel,
--                                      S3C2410_DMASRC_HW, 0x3,
--                                      prtd->params->dma_addr);
-+                                    S3C2410_DMASRC_HW,
-+                                    prtd->params->dma_addr);
-       }
- 
-+      s3c2410_dma_config(prtd->params->channel,
-+                         prtd->params->dma_size);
-+
-       /* flush the DMA channel */
-       s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
-       prtd->dma_loaded = 0;