[AVR32] Clean up external DAC setup code
authorHaavard Skinnemoen <hskinnemoen@atmel.com>
Mon, 29 Oct 2007 15:24:09 +0000 (16:24 +0100)
committerHaavard Skinnemoen <hskinnemoen@atmel.com>
Fri, 25 Jan 2008 07:31:42 +0000 (08:31 +0100)
Reduce the ridiculous amount of #ifdef clutter in atstk1002.c a bit by
moving all the extdac stuff into its own function and providing an
empty stub for the case when it isn't wanted.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
arch/avr32/boards/atstk1000/Kconfig
arch/avr32/boards/atstk1000/atstk1002.c

index dcf9e9e2b2897a56fe78246535167342993b0135..23e8c84f023732c88799c5d3aed5416c2ba16551 100644 (file)
@@ -76,4 +76,9 @@ config BOARD_ATSTK1000_J2_RGB
 
 endchoice
 
+config BOARD_ATSTK1000_EXTDAC
+       bool
+       depends on !BOARD_ATSTK1002_SW1_CUSTOM && !BOARD_ATSTK1002_SW3_CUSTOM
+       default y
+
 endif  # stk 1002
index 2481d2389873d45de60f700f90eb440b4081ddfe..57f610ea30dfebe322dc9de3f7b55b299443ed19 100644 (file)
@@ -48,18 +48,16 @@ static struct eth_platform_data __initdata eth_data[2] = {
        },
 };
 
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 static struct at73c213_board_info at73c213_data = {
        .ssc_id         = 0,
        .shortname      = "AVR32 STK1000 external DAC",
 };
 #endif
-#endif
 
 #ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
 static struct spi_board_info spi0_board_info[] __initdata = {
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
        {
                /* AT73C213 */
                .modalias       = "at73c213",
@@ -140,9 +138,8 @@ static void __init set_hw_addr(struct platform_device *pdev)
        clk_put(pclk);
 }
 
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-static void __init at73c213_set_clk(struct at73c213_board_info *info)
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+static void __init atstk1002_setup_extdac(void)
 {
        struct clk *gclk;
        struct clk *pll;
@@ -160,7 +157,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info)
        }
 
        at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-       info->dac_clk = gclk;
+       at73c213_data.dac_clk = gclk;
 
 err_set_clk:
        clk_put(pll);
@@ -169,8 +166,12 @@ err_pll:
 err_gclk:
        return;
 }
-#endif
-#endif
+#else
+static void __init atstk1002_setup_extdac(void)
+{
+
+}
+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
 
 void __init setup_board(void)
 {
@@ -239,12 +240,7 @@ static int __init atstk1002_init(void)
 #endif
 
        atstk1000_setup_j2_leds();
-
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-       at73c213_set_clk(&at73c213_data);
-#endif
-#endif
+       atstk1002_setup_extdac();
 
        return 0;
 }