BOARD:=brcm63xx
BOARDNAME:=Broadcom BCM963xx
FEATURES:=squashfs jffs2 broken usb atm
-LINUX_VERSION:=2.6.25.17
+LINUX_VERSION:=2.6.27
include $(INCLUDE_DIR)/target.mk
--- /dev/null
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_8139TOO is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_FORE200E is not set
+CONFIG_AUDIT=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BCM63XX=y
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BCM63XX_ENET=y
+CONFIG_BCM63XX_PHY=y
+CONFIG_BINFMT_MISC=m
+CONFIG_BITREVERSE=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BOARD_BCM963XX=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BSD_DISKLABEL is not set
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_CEVT_R4K=y
+CONFIG_CICADA_PHY=m
+# CONFIG_CIFS is not set
+CONFIG_CLASSIC_RCU=y
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRAMFS=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CSRC_R4K=y
+CONFIG_DAVICOM_PHY=m
+CONFIG_DEFAULT_BIC=y
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEFAULT_TCP_CONG="bic"
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DUMMY=m
+CONFIG_EARLY_PRINTK=y
+CONFIG_ELF_CORE=y
+CONFIG_EQUALIZER=m
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FIXED_PHY is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FUSE_FS=m
+CONFIG_FW_LOADER=m
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_CLK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+# CONFIG_IDE is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IP6_NF_RAW is not set
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IP_SCTP=m
+CONFIG_IRQ_CPU=y
+# CONFIG_ISDN is not set
+CONFIG_KMOD=y
+CONFIG_LBD=y
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_LLC2 is not set
+CONFIG_LXT_PHY=m
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MARVELL_PHY=m
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NF_CT_ACCT=y
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=m
+# CONFIG_NO_IOPORT is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PCCARD=m
+CONFIG_PCCARD_NONSTATIC=m
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_PHYLIB=y
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_QSEMI_PHY=m
+# CONFIG_R6040 is not set
+# CONFIG_REALTEK_PHY is not set
+CONFIG_RELAY=y
+CONFIG_RFKILL_LEDS=y
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+CONFIG_SERIO=m
+CONFIG_SERIO_I8042=m
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SOUND is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_VMALLOC=y
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_TC35815 is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+CONFIG_TCP_CONG_VEGAS=m
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB=m
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_SERIAL_CH341 is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WAN_ROUTER=m
+# CONFIG_WATCHDOG is not set
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+From a9f65413f9ea81ef2208da66a3db9cb8a9020eef Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 18 Jul 2008 15:53:08 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add Broadcom 63xx CPU definitions.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/kernel/cpu-probe.c | 25 +++++++++++++++++++++++++
+ arch/mips/mm/tlbex.c | 4 ++++
+ include/asm-mips/cpu.h | 7 +++++++
+ 3 files changed, 36 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
+index e621fda..9775315 100644
+--- a/arch/mips/kernel/cpu-probe.c
++++ b/arch/mips/kernel/cpu-probe.c
+@@ -153,6 +153,10 @@ void __init check_wait(void)
+ case CPU_25KF:
+ case CPU_PR4450:
+ case CPU_BCM3302:
++ case CPU_BCM6338:
++ case CPU_BCM6345:
++ case CPU_BCM6348:
++ case CPU_BCM6358:
+ cpu_wait = r4k_wait;
+ break;
+
+@@ -802,11 +806,28 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_BCM3302:
++ /* same as PRID_IMP_BCM6338 */
+ c->cputype = CPU_BCM3302;
+ break;
+ case PRID_IMP_BCM4710:
+ c->cputype = CPU_BCM4710;
+ break;
++ case PRID_IMP_BCM6345:
++ c->cputype = CPU_BCM6345;
++ break;
++ case PRID_IMP_BCM6348:
++ c->cputype = CPU_BCM6348;
++ break;
++ case PRID_IMP_BCM4350:
++ switch (c->processor_id & 0xf0) {
++ case PRID_REV_BCM6358:
++ c->cputype = CPU_BCM6358;
++ break;
++ default:
++ c->cputype = CPU_UNKNOWN;
++ break;
++ }
++ break;
+ default:
+ c->cputype = CPU_UNKNOWN;
+ break;
+@@ -892,6 +913,10 @@ static __cpuinit const char *cpu_to_name(struct cpuinfo_mips *c)
+ case CPU_SR71000: name = "Sandcraft SR71000"; break;
+ case CPU_BCM3302: name = "Broadcom BCM3302"; break;
+ case CPU_BCM4710: name = "Broadcom BCM4710"; break;
++ case CPU_BCM6338: name = "Broadcom BCM6338"; break;
++ case CPU_BCM6345: name = "Broadcom BCM6345"; break;
++ case CPU_BCM6348: name = "Broadcom BCM6348"; break;
++ case CPU_BCM6358: name = "Broadcom BCM6358"; break;
+ case CPU_PR4450: name = "Philips PR4450"; break;
+ case CPU_LOONGSON2: name = "ICT Loongson-2"; break;
+ default:
+diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
+index 979cf91..f6deda3 100644
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -317,6 +317,10 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
+ case CPU_BCM3302:
+ case CPU_BCM4710:
+ case CPU_LOONGSON2:
++ case CPU_BCM6338:
++ case CPU_BCM6345:
++ case CPU_BCM6348:
++ case CPU_BCM6358:
+ if (m4kc_tlbp_war())
+ uasm_i_nop(p);
+ tlbw(p);
+diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
+index 229a786..538bcde 100644
+--- a/include/asm-mips/cpu.h
++++ b/include/asm-mips/cpu.h
+@@ -112,6 +112,12 @@
+
+ #define PRID_IMP_BCM4710 0x4000
+ #define PRID_IMP_BCM3302 0x9000
++#define PRID_IMP_BCM6338 0x9000
++#define PRID_IMP_BCM6345 0x8000
++#define PRID_IMP_BCM6348 0x9100
++#define PRID_IMP_BCM4350 0xA000
++#define PRID_REV_BCM6358 0x0010
++#define PRID_REV_BCM6368 0x0030
+
+ /*
+ * Definitions for 7:0 on legacy processors
+@@ -198,6 +204,7 @@ enum cpu_type_enum {
+ CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
+ CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500,
+ CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
++ CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358,
+
+ /*
+ * MIPS64 class processors
+--
+1.5.4.3
+
--- /dev/null
+From 0713aadd2a4e543b69022aa40bdec3e1dc5bc1e5 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Mon, 18 Aug 2008 13:56:57 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add support for Broadcom 63xx CPUs.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/Kconfig | 16 +
+ arch/mips/Makefile | 7 +
+ arch/mips/bcm63xx/Kconfig | 9 +
+ arch/mips/bcm63xx/Makefile | 2 +
+ arch/mips/bcm63xx/clk.c | 220 ++++++
+ arch/mips/bcm63xx/cpu.c | 245 +++++++
+ arch/mips/bcm63xx/cs.c | 144 ++++
+ arch/mips/bcm63xx/early_printk.c | 30 +
+ arch/mips/bcm63xx/gpio.c | 98 +++
+ arch/mips/bcm63xx/irq.c | 253 +++++++
+ arch/mips/bcm63xx/prom.c | 43 ++
+ arch/mips/bcm63xx/setup.c | 108 +++
+ arch/mips/bcm63xx/timer.c | 205 ++++++
+ include/asm-mips/fixmap.h | 4 +
+ include/asm-mips/mach-bcm63xx/bcm63xx_clk.h | 11 +
+ include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h | 314 +++++++++
+ include/asm-mips/mach-bcm63xx/bcm63xx_cs.h | 10 +
+ include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h | 14 +
+ include/asm-mips/mach-bcm63xx/bcm63xx_io.h | 93 +++
+ include/asm-mips/mach-bcm63xx/bcm63xx_irq.h | 15 +
+ include/asm-mips/mach-bcm63xx/bcm63xx_regs.h | 728 ++++++++++++++++++++
+ include/asm-mips/mach-bcm63xx/bcm63xx_timer.h | 11 +
+ .../asm-mips/mach-bcm63xx/cpu-feature-overrides.h | 51 ++
+ include/asm-mips/mach-bcm63xx/gpio.h | 52 ++
+ include/asm-mips/mach-bcm63xx/war.h | 25 +
+ 25 files changed, 2708 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/Kconfig
+ create mode 100644 arch/mips/bcm63xx/Makefile
+ create mode 100644 arch/mips/bcm63xx/clk.c
+ create mode 100644 arch/mips/bcm63xx/cpu.c
+ create mode 100644 arch/mips/bcm63xx/cs.c
+ create mode 100644 arch/mips/bcm63xx/early_printk.c
+ create mode 100644 arch/mips/bcm63xx/gpio.c
+ create mode 100644 arch/mips/bcm63xx/irq.c
+ create mode 100644 arch/mips/bcm63xx/prom.c
+ create mode 100644 arch/mips/bcm63xx/setup.c
+ create mode 100644 arch/mips/bcm63xx/timer.c
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_clk.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_cs.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_io.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_irq.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_regs.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_timer.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/cpu-feature-overrides.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/gpio.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/war.h
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 1e06d23..88dfe21 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -59,6 +59,21 @@ config BCM47XX
+ help
+ Support for BCM47XX based boards
+
++config BCM63XX
++ bool "Broadcom 63xx based boards"
++ select CEVT_R4K
++ select CSRC_R4K
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_HAS_EARLY_PRINTK
++ select SWAP_IO_SPACE
++ select GENERIC_GPIO
++ help
++ Support for BCM63XX based boards
++
+ config MIPS_COBALT
+ bool "Cobalt Server"
+ select CEVT_R4K
+@@ -600,6 +615,7 @@ endchoice
+
+ source "arch/mips/au1000/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
++source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+ source "arch/mips/lasat/Kconfig"
+ source "arch/mips/pmc-sierra/Kconfig"
+diff --git a/arch/mips/Makefile b/arch/mips/Makefile
+index 9aab51c..a45652e 100644
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -533,6 +533,13 @@ cflags-$(CONFIG_BCM47XX) += -Iinclude/asm-mips/mach-bcm47xx
+ load-$(CONFIG_BCM47XX) := 0xffffffff80001000
+
+ #
++# Broadcom BCM63XX boards
++#
++core-$(CONFIG_BCM63XX) += arch/mips/bcm63xx/
++cflags-$(CONFIG_BCM63XX) += -Iinclude/asm-mips/mach-bcm63xx/
++load-$(CONFIG_BCM63XX) := 0xffffffff80010000
++
++#
+ # SNI RM
+ #
+ core-$(CONFIG_SNI_RM) += arch/mips/sni/
+diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
+new file mode 100644
+index 0000000..e6d2699
+--- /dev/null
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -0,0 +1,9 @@
++menu "CPU support"
++ depends on BCM63XX
++
++config BCM63XX_CPU_6348
++ bool "support 6348 CPU"
++
++config BCM63XX_CPU_6358
++ bool "support 6358 CPU"
++endmenu
+diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
+new file mode 100644
+index 0000000..4fc0a1c
+--- /dev/null
++++ b/arch/mips/bcm63xx/Makefile
+@@ -0,0 +1,2 @@
++obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o
++obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
+new file mode 100644
+index 0000000..ae1f41f
+--- /dev/null
++++ b/arch/mips/bcm63xx/clk.c
+@@ -0,0 +1,220 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_clk.h>
++
++DEFINE_MUTEX(clocks_mutex);
++
++
++static void clk_enable_unlocked(struct clk *clk)
++{
++ if (clk->set && (clk->usage++) == 0)
++ clk->set(clk, 1);
++}
++
++static void clk_disable_unlocked(struct clk *clk)
++{
++ if (clk->set && (--clk->usage) == 0)
++ clk->set(clk, 0);
++}
++
++static void bcm_hwclock_set(u32 mask, int enable)
++{
++ u32 reg;
++
++ reg = bcm_perf_readl(PERF_CKCTL_REG);
++ if (enable)
++ reg |= mask;
++ else
++ reg &= ~mask;
++ bcm_perf_writel(reg, PERF_CKCTL_REG);
++}
++
++/*
++ * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
++ */
++static void enet_misc_set(struct clk *clk, int enable)
++{
++ u32 mask;
++
++ if (BCMCPU_IS_6348())
++ mask = CKCTL_6348_ENET_EN;
++ else
++ /* BCMCPU_IS_6358 */
++ mask = CKCTL_6358_EMUSB_EN;
++ bcm_hwclock_set(mask, enable);
++}
++
++static struct clk clk_enet_misc = {
++ .set = enet_misc_set,
++};
++
++/*
++ * Ethernet MAC clocks: only revelant on 6358, silently enable misc
++ * clocks
++ */
++static void enetx_set(struct clk *clk, int enable)
++{
++ if (enable)
++ clk_enable_unlocked(&clk_enet_misc);
++ else
++ clk_disable_unlocked(&clk_enet_misc);
++
++ if (BCMCPU_IS_6358()) {
++ u32 mask;
++
++ if (clk->id == 0)
++ mask = CKCTL_6358_ENET0_EN;
++ else
++ mask = CKCTL_6358_ENET1_EN;
++ bcm_hwclock_set(mask, enable);
++ }
++}
++
++static struct clk clk_enet0 = {
++ .id = 0,
++ .set = enetx_set,
++};
++
++static struct clk clk_enet1 = {
++ .id = 1,
++ .set = enetx_set,
++};
++
++/*
++ * Ethernet PHY clock
++ */
++static void ephy_set(struct clk *clk, int enable)
++{
++ if (!BCMCPU_IS_6358())
++ return;
++ bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
++}
++
++
++static struct clk clk_ephy = {
++ .set = ephy_set,
++};
++
++/*
++ * PCM clock
++ */
++static void pcm_set(struct clk *clk, int enable)
++{
++ if (!BCMCPU_IS_6358())
++ return;
++ bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
++}
++
++static struct clk clk_pcm = {
++ .set = pcm_set,
++};
++
++/*
++ * USB host clock
++ */
++static void usbh_set(struct clk *clk, int enable)
++{
++ if (!BCMCPU_IS_6348())
++ return;
++ bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
++}
++
++static struct clk clk_usbh = {
++ .set = usbh_set,
++};
++
++/*
++ * SPI clock
++ */
++static void spi_set(struct clk *clk, int enable)
++{
++ u32 mask;
++
++ if (BCMCPU_IS_6348())
++ mask = CKCTL_6348_SPI_EN;
++ else
++ /* BCMCPU_IS_6358 */
++ mask = CKCTL_6358_SPI_EN;
++ bcm_hwclock_set(mask, enable);
++}
++
++static struct clk clk_spi = {
++ .set = spi_set,
++};
++
++/*
++ * Internal peripheral clock
++ */
++static struct clk clk_periph = {
++ .rate = (50 * 1000 * 1000),
++};
++
++
++/*
++ * Linux clock API implementation
++ */
++int clk_enable(struct clk *clk)
++{
++ mutex_lock(&clocks_mutex);
++ clk_enable_unlocked(clk);
++ mutex_unlock(&clocks_mutex);
++ return 0;
++}
++
++EXPORT_SYMBOL(clk_enable);
++
++void clk_disable(struct clk *clk)
++{
++ mutex_lock(&clocks_mutex);
++ clk_disable_unlocked(clk);
++ mutex_unlock(&clocks_mutex);
++}
++
++EXPORT_SYMBOL(clk_disable);
++
++unsigned long clk_get_rate(struct clk *clk)
++{
++ return clk->rate;
++}
++
++EXPORT_SYMBOL(clk_get_rate);
++
++struct clk *clk_get(struct device *dev, const char *id)
++{
++ if (!strcmp(id, "enet0"))
++ return &clk_enet0;
++ if (!strcmp(id, "enet1"))
++ return &clk_enet1;
++ if (!strcmp(id, "ephy"))
++ return &clk_ephy;
++ if (!strcmp(id, "usbh"))
++ return &clk_usbh;
++ if (!strcmp(id, "spi"))
++ return &clk_spi;
++ if (!strcmp(id, "periph"))
++ return &clk_periph;
++ if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
++ return &clk_pcm;
++ return ERR_PTR(-ENOENT);
++}
++
++EXPORT_SYMBOL(clk_get);
++
++void clk_put(struct clk *clk)
++{
++}
++
++EXPORT_SYMBOL(clk_put);
+diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
+new file mode 100644
+index 0000000..0a403dd
+--- /dev/null
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -0,0 +1,245 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/cpu.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_irq.h>
++
++const unsigned long *bcm63xx_regs_base;
++EXPORT_SYMBOL(bcm63xx_regs_base);
++
++const int *bcm63xx_irqs;
++EXPORT_SYMBOL(bcm63xx_irqs);
++
++static u16 bcm63xx_cpu_id;
++static u16 bcm63xx_cpu_rev;
++static unsigned int bcm63xx_cpu_freq;
++static unsigned int bcm63xx_memory_size;
++
++/*
++ * 6348 register sets and irqs
++ */
++static const unsigned long bcm96348_regs_base[] = {
++ [RSET_DSL_LMEM] = BCM_6348_DSL_LMEM_BASE,
++ [RSET_PERF] = BCM_6348_PERF_BASE,
++ [RSET_TIMER] = BCM_6348_TIMER_BASE,
++ [RSET_WDT] = BCM_6348_WDT_BASE,
++ [RSET_UART0] = BCM_6348_UART0_BASE,
++ [RSET_GPIO] = BCM_6348_GPIO_BASE,
++ [RSET_SPI] = BCM_6348_SPI_BASE,
++ [RSET_OHCI0] = BCM_6348_OHCI0_BASE,
++ [RSET_OHCI_PRIV] = BCM_6348_OHCI_PRIV_BASE,
++ [RSET_USBH_PRIV] = BCM_6348_USBH_PRIV_BASE,
++ [RSET_MPI] = BCM_6348_MPI_BASE,
++ [RSET_PCMCIA] = BCM_6348_PCMCIA_BASE,
++ [RSET_SDRAM] = BCM_6348_SDRAM_BASE,
++ [RSET_DSL] = BCM_6348_DSL_BASE,
++ [RSET_ENET0] = BCM_6348_ENET0_BASE,
++ [RSET_ENET1] = BCM_6348_ENET1_BASE,
++ [RSET_ENETDMA] = BCM_6348_ENETDMA_BASE,
++ [RSET_MEMC] = BCM_6348_MEMC_BASE,
++ [RSET_DDR] = BCM_6348_DDR_BASE,
++};
++
++static const int bcm96348_irqs[] = {
++ [IRQ_TIMER] = BCM_6348_TIMER_IRQ,
++ [IRQ_UART0] = BCM_6348_UART0_IRQ,
++ [IRQ_DSL] = BCM_6348_DSL_IRQ,
++ [IRQ_ENET0] = BCM_6348_ENET0_IRQ,
++ [IRQ_ENET1] = BCM_6348_ENET1_IRQ,
++ [IRQ_ENET_PHY] = BCM_6348_ENET_PHY_IRQ,
++ [IRQ_OHCI0] = BCM_6348_OHCI0_IRQ,
++ [IRQ_PCMCIA] = BCM_6348_PCMCIA_IRQ,
++ [IRQ_ENET0_RXDMA] = BCM_6348_ENET0_RXDMA_IRQ,
++ [IRQ_ENET0_TXDMA] = BCM_6348_ENET0_TXDMA_IRQ,
++ [IRQ_ENET1_RXDMA] = BCM_6348_ENET1_RXDMA_IRQ,
++ [IRQ_ENET1_TXDMA] = BCM_6348_ENET1_TXDMA_IRQ,
++ [IRQ_PCI] = BCM_6348_PCI_IRQ,
++};
++
++/*
++ * 6358 register sets and irqs
++ */
++static const unsigned long bcm96358_regs_base[] = {
++ [RSET_DSL_LMEM] = BCM_6358_DSL_LMEM_BASE,
++ [RSET_PERF] = BCM_6358_PERF_BASE,
++ [RSET_TIMER] = BCM_6358_TIMER_BASE,
++ [RSET_WDT] = BCM_6358_WDT_BASE,
++ [RSET_UART0] = BCM_6358_UART0_BASE,
++ [RSET_GPIO] = BCM_6358_GPIO_BASE,
++ [RSET_SPI] = BCM_6358_SPI_BASE,
++ [RSET_OHCI0] = BCM_6358_OHCI0_BASE,
++ [RSET_EHCI0] = BCM_6358_EHCI0_BASE,
++ [RSET_OHCI_PRIV] = BCM_6358_OHCI_PRIV_BASE,
++ [RSET_USBH_PRIV] = BCM_6358_USBH_PRIV_BASE,
++ [RSET_MPI] = BCM_6358_MPI_BASE,
++ [RSET_PCMCIA] = BCM_6358_PCMCIA_BASE,
++ [RSET_SDRAM] = BCM_6358_SDRAM_BASE,
++ [RSET_DSL] = BCM_6358_DSL_BASE,
++ [RSET_ENET0] = BCM_6358_ENET0_BASE,
++ [RSET_ENET1] = BCM_6358_ENET1_BASE,
++ [RSET_ENETDMA] = BCM_6358_ENETDMA_BASE,
++ [RSET_MEMC] = BCM_6358_MEMC_BASE,
++ [RSET_DDR] = BCM_6358_DDR_BASE,
++};
++
++static const int bcm96358_irqs[] = {
++ [IRQ_TIMER] = BCM_6358_TIMER_IRQ,
++ [IRQ_UART0] = BCM_6358_UART0_IRQ,
++ [IRQ_DSL] = BCM_6358_DSL_IRQ,
++ [IRQ_ENET0] = BCM_6358_ENET0_IRQ,
++ [IRQ_ENET1] = BCM_6358_ENET1_IRQ,
++ [IRQ_ENET_PHY] = BCM_6358_ENET_PHY_IRQ,
++ [IRQ_OHCI0] = BCM_6358_OHCI0_IRQ,
++ [IRQ_EHCI0] = BCM_6358_EHCI0_IRQ,
++ [IRQ_PCMCIA] = BCM_6358_PCMCIA_IRQ,
++ [IRQ_ENET0_RXDMA] = BCM_6358_ENET0_RXDMA_IRQ,
++ [IRQ_ENET0_TXDMA] = BCM_6358_ENET0_TXDMA_IRQ,
++ [IRQ_ENET1_RXDMA] = BCM_6358_ENET1_RXDMA_IRQ,
++ [IRQ_ENET1_TXDMA] = BCM_6358_ENET1_TXDMA_IRQ,
++ [IRQ_PCI] = BCM_6358_PCI_IRQ,
++};
++
++u16 __bcm63xx_get_cpu_id(void)
++{
++ return bcm63xx_cpu_id;
++}
++
++EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
++
++u16 bcm63xx_get_cpu_rev(void)
++{
++ return bcm63xx_cpu_rev;
++}
++
++EXPORT_SYMBOL(bcm63xx_get_cpu_rev);
++
++unsigned int bcm63xx_get_cpu_freq(void)
++{
++ return bcm63xx_cpu_freq;
++}
++
++unsigned int bcm63xx_get_memory_size(void)
++{
++ return bcm63xx_memory_size;
++}
++
++static unsigned int detect_cpu_clock(void)
++{
++ unsigned int tmp, n1 = 0, n2 = 0, m1 = 0;
++
++ /*
++ * frequency depends on PLL configuration:
++ */
++ if (BCMCPU_IS_6348()) {
++ /* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */
++ tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG);
++ n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT;
++ n2 = (tmp & MIPSPLLCTL_N2_MASK) >> MIPSPLLCTL_N2_SHIFT;
++ m1 = (tmp & MIPSPLLCTL_M1CPU_MASK) >> MIPSPLLCTL_M1CPU_SHIFT;
++ n1 += 1;
++ n2 += 2;
++ m1 += 1;
++ }
++
++ if (BCMCPU_IS_6358()) {
++ /* 16MHz * N1 * N2 / M1_CPU */
++ tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG);
++ n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT;
++ n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT;
++ m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT;
++ }
++
++ return (16 * 1000000 * n1 * n2) / m1;
++}
++
++/*
++ * attempt to detect the amount of memory installed
++ */
++static unsigned int detect_memory_size(void)
++{
++ unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
++ u32 val;
++
++ if (BCMCPU_IS_6348()) {
++ val = bcm_sdram_readl(SDRAM_CFG_REG);
++ rows = (val & SDRAM_CFG_ROW_MASK) >> SDRAM_CFG_ROW_SHIFT;
++ cols = (val & SDRAM_CFG_COL_MASK) >> SDRAM_CFG_COL_SHIFT;
++ is_32bits = (val & SDRAM_CFG_32B_MASK) ? 1 : 0;
++ banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1;
++ }
++
++ if (BCMCPU_IS_6358()) {
++ val = bcm_memc_readl(MEMC_CFG_REG);
++ rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT;
++ cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT;
++ is_32bits = (val & MEMC_CFG_32B_MASK) ? 0 : 1;
++ banks = 2;
++ }
++
++ /* 0 => 11 address bits ... 2 => 13 address bits */
++ rows += 11;
++
++ /* 0 => 8 address bits ... 2 => 10 address bits */
++ cols += 8;
++
++ return 1 << (cols + rows + (is_32bits + 1) + banks);
++}
++
++void __init bcm63xx_cpu_init(void)
++{
++ unsigned int tmp, expected_cpu_id;
++ struct cpuinfo_mips *c = ¤t_cpu_data;
++
++ /* soc registers location depends on cpu type */
++ expected_cpu_id = 0;
++
++ switch (c->cputype) {
++ case CPU_BCM6348:
++ expected_cpu_id = BCM6348_CPU_ID;
++ bcm63xx_regs_base = bcm96348_regs_base;
++ bcm63xx_irqs = bcm96348_irqs;
++ break;
++ case CPU_BCM6358:
++ expected_cpu_id = BCM6358_CPU_ID;
++ bcm63xx_regs_base = bcm96358_regs_base;
++ bcm63xx_irqs = bcm96358_irqs;
++ break;
++ }
++
++ /* really early to panic, but delaying panic would not help
++ * since we will never get any working console */
++ if (!expected_cpu_id)
++ panic("unsupported Broadcom CPU");
++
++ /*
++ * bcm63xx_regs_base is set, we can access soc registers
++ */
++
++ /* double check CPU type */
++ tmp = bcm_perf_readl(PERF_REV_REG);
++ bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
++ bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
++
++ if (bcm63xx_cpu_id != expected_cpu_id)
++ panic("bcm63xx CPU id mismatch");
++
++ bcm63xx_cpu_freq = detect_cpu_clock();
++ bcm63xx_memory_size = detect_memory_size();
++
++ printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n",
++ bcm63xx_cpu_id, bcm63xx_cpu_rev);
++ printk(KERN_INFO "CPU frequency is %u MHz\n",
++ bcm63xx_cpu_freq);
++ printk(KERN_INFO "%uMB of RAM installed\n",
++ bcm63xx_memory_size >> 20);
++}
+diff --git a/arch/mips/bcm63xx/cs.c b/arch/mips/bcm63xx/cs.c
+new file mode 100644
+index 0000000..50d8190
+--- /dev/null
++++ b/arch/mips/bcm63xx/cs.c
+@@ -0,0 +1,144 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/log2.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_cs.h>
++
++static DEFINE_SPINLOCK(bcm63xx_cs_lock);
++
++/*
++ * check if given chip select exists
++ */
++static int is_valid_cs(unsigned int cs)
++{
++ if (cs > 6)
++ return 0;
++ return 1;
++}
++
++/*
++ * Configure chipselect base address and size (bytes).
++ * Size must be a power of two between 8k and 256M.
++ */
++int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size)
++{
++ unsigned long flags;
++ u32 val;
++
++ if (!is_valid_cs(cs))
++ return -EINVAL;
++
++ /* sanity check on size */
++ if (size != roundup_pow_of_two(size))
++ return -EINVAL;
++
++ if (size < 8 * 1024 || size > 256 * 1024 * 1024)
++ return -EINVAL;
++
++ val = (base & MPI_CSBASE_BASE_MASK);
++ /* 8k => 0 - 256M => 15 */
++ val |= (ilog2(size) - ilog2(8 * 1024)) << MPI_CSBASE_SIZE_SHIFT;
++
++ spin_lock_irqsave(&bcm63xx_cs_lock, flags);
++ bcm_mpi_writel(val, MPI_CSBASE_REG(cs));
++ spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
++
++ return 0;
++}
++
++EXPORT_SYMBOL(bcm63xx_set_cs_base);
++
++/*
++ * configure chipselect timing (ns)
++ */
++int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait,
++ unsigned int setup, unsigned int hold)
++{
++ unsigned long flags;
++ u32 val;
++
++ if (!is_valid_cs(cs))
++ return -EINVAL;
++
++ spin_lock_irqsave(&bcm63xx_cs_lock, flags);
++ val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
++ val &= ~(MPI_CSCTL_WAIT_MASK);
++ val &= ~(MPI_CSCTL_SETUP_MASK);
++ val &= ~(MPI_CSCTL_HOLD_MASK);
++ val |= wait << MPI_CSCTL_WAIT_SHIFT;
++ val |= setup << MPI_CSCTL_SETUP_SHIFT;
++ val |= hold << MPI_CSCTL_HOLD_SHIFT;
++ bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
++ spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
++
++ return 0;
++}
++
++EXPORT_SYMBOL(bcm63xx_set_cs_timing);
++
++/*
++ * configure other chipselect parameter (data bus size, ...)
++ */
++int bcm63xx_set_cs_param(unsigned int cs, u32 params)
++{
++ unsigned long flags;
++ u32 val;
++
++ if (!is_valid_cs(cs))
++ return -EINVAL;
++
++ /* none of this fields apply to pcmcia */
++ if (cs == MPI_CS_PCMCIA_COMMON ||
++ cs == MPI_CS_PCMCIA_ATTR ||
++ cs == MPI_CS_PCMCIA_IO)
++ return -EINVAL;
++
++ spin_lock_irqsave(&bcm63xx_cs_lock, flags);
++ val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
++ val &= ~(MPI_CSCTL_DATA16_MASK);
++ val &= ~(MPI_CSCTL_SYNCMODE_MASK);
++ val &= ~(MPI_CSCTL_TSIZE_MASK);
++ val &= ~(MPI_CSCTL_ENDIANSWAP_MASK);
++ val |= params;
++ bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
++ spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
++
++ return 0;
++}
++
++EXPORT_SYMBOL(bcm63xx_set_cs_param);
++
++/*
++ * set cs status (enable/disable)
++ */
++int bcm63xx_set_cs_status(unsigned int cs, int enable)
++{
++ unsigned long flags;
++ u32 val;
++
++ if (!is_valid_cs(cs))
++ return -EINVAL;
++
++ spin_lock_irqsave(&bcm63xx_cs_lock, flags);
++ val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
++ if (enable)
++ val |= MPI_CSCTL_ENABLE_MASK;
++ else
++ val &= ~MPI_CSCTL_ENABLE_MASK;
++ bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
++ spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
++ return 0;
++}
++
++EXPORT_SYMBOL(bcm63xx_set_cs_status);
+diff --git a/arch/mips/bcm63xx/early_printk.c b/arch/mips/bcm63xx/early_printk.c
+new file mode 100644
+index 0000000..bf353c9
+--- /dev/null
++++ b/arch/mips/bcm63xx/early_printk.c
+@@ -0,0 +1,30 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++
++static void __init wait_xfered(void)
++{
++ unsigned int val;
++
++ /* wait for any previous char to be transmitted */
++ do {
++ val = bcm_uart0_readl(UART_IR_REG);
++ if (val & UART_IR_STAT(UART_IR_TXEMPTY))
++ break;
++ } while (1);
++}
++
++void __init prom_putchar(char c)
++{
++ wait_xfered();
++ bcm_uart0_writel(c, UART_FIFO_REG);
++ wait_xfered();
++}
+diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
+new file mode 100644
+index 0000000..2c203a6
+--- /dev/null
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -0,0 +1,98 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_gpio.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++
++static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
++
++void bcm63xx_gpio_set_dataout(int gpio, int val)
++{
++ u32 reg;
++ u32 mask;
++ u32 tmp;
++ unsigned long flags;
++
++ if (gpio >= BCM63XX_GPIO_COUNT)
++ BUG();
++
++ if (gpio < 32) {
++ reg = GPIO_DATA_LO_REG;
++ mask = 1 << gpio;
++ } else {
++ reg = GPIO_DATA_HI_REG;
++ mask = 1 << (gpio - 32);
++ }
++
++ spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
++ tmp = bcm_gpio_readl(reg);
++ if (val)
++ tmp |= mask;
++ else
++ tmp &= ~mask;
++ bcm_gpio_writel(tmp, reg);
++ spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
++}
++
++EXPORT_SYMBOL(bcm63xx_gpio_set_dataout);
++
++int bcm63xx_gpio_get_datain(int gpio)
++{
++ u32 reg;
++ u32 mask;
++
++ if (gpio >= BCM63XX_GPIO_COUNT)
++ BUG();
++
++ if (gpio < 32) {
++ reg = GPIO_DATA_LO_REG;
++ mask = 1 << gpio;
++ } else {
++ reg = GPIO_DATA_HI_REG;
++ mask = 1 << (gpio - 32);
++ }
++
++ return !!(bcm_gpio_readl(reg) & mask);
++}
++
++EXPORT_SYMBOL(bcm63xx_gpio_get_datain);
++
++void bcm63xx_gpio_set_direction(int gpio, int dir)
++{
++ u32 reg;
++ u32 mask;
++ u32 tmp;
++ unsigned long flags;
++
++ if (gpio >= BCM63XX_GPIO_COUNT)
++ BUG();
++
++ if (gpio < 32) {
++ reg = GPIO_CTL_LO_REG;
++ mask = 1 << gpio;
++ } else {
++ reg = GPIO_CTL_HI_REG;
++ mask = 1 << (gpio - 32);
++ }
++
++ spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
++ tmp = bcm_gpio_readl(reg);
++ if (dir == GPIO_DIR_IN)
++ tmp &= ~mask;
++ else
++ tmp |= mask;
++ bcm_gpio_writel(tmp, reg);
++ spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
++}
++
++EXPORT_SYMBOL(bcm63xx_gpio_set_direction);
+diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
+new file mode 100644
+index 0000000..a0c5cd1
+--- /dev/null
++++ b/arch/mips/bcm63xx/irq.c
+@@ -0,0 +1,253 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <asm/irq_cpu.h>
++#include <asm/mipsregs.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_irq.h>
++
++/*
++ * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
++ * prioritize any interrupt relatively to another. the static counter
++ * will resume the loop where it ended the last time we left this
++ * function.
++ */
++static void bcm63xx_irq_dispatch_internal(void)
++{
++ u32 pending;
++ static int i;
++
++ pending = bcm_perf_readl(PERF_IRQMASK_REG) &
++ bcm_perf_readl(PERF_IRQSTAT_REG);
++
++ if (!pending)
++ return ;
++
++ while (1) {
++ int to_call = i;
++
++ i = (i + 1) & 0x1f;
++ if (pending & (1 << to_call)) {
++ do_IRQ(to_call + IRQ_INTERNAL_BASE);
++ break;
++ }
++ }
++}
++
++asmlinkage void plat_irq_dispatch(void)
++{
++ u32 cause;
++
++ do {
++ cause = read_c0_cause() & read_c0_status() & ST0_IM;
++
++ if (!cause)
++ break;
++
++ if (cause & CAUSEF_IP7)
++ do_IRQ(7);
++ if (cause & CAUSEF_IP2)
++ bcm63xx_irq_dispatch_internal();
++ if (cause & CAUSEF_IP3)
++ do_IRQ(IRQ_EXT_0);
++ if (cause & CAUSEF_IP4)
++ do_IRQ(IRQ_EXT_1);
++ if (cause & CAUSEF_IP5)
++ do_IRQ(IRQ_EXT_2);
++ if (cause & CAUSEF_IP6)
++ do_IRQ(IRQ_EXT_3);
++ } while (1);
++}
++
++/*
++ * internal IRQs operations: only mask/unmask on PERF irq mask
++ * register.
++ */
++static inline void bcm63xx_internal_irq_mask(unsigned int irq)
++{
++ u32 mask;
++
++ irq -= IRQ_INTERNAL_BASE;
++ mask = bcm_perf_readl(PERF_IRQMASK_REG);
++ mask &= ~(1 << irq);
++ bcm_perf_writel(mask, PERF_IRQMASK_REG);
++}
++
++static void bcm63xx_internal_irq_unmask(unsigned int irq)
++{
++ u32 mask;
++
++ irq -= IRQ_INTERNAL_BASE;
++ mask = bcm_perf_readl(PERF_IRQMASK_REG);
++ mask |= (1 << irq);
++ bcm_perf_writel(mask, PERF_IRQMASK_REG);
++}
++
++static unsigned int bcm63xx_internal_irq_startup(unsigned int irq)
++{
++ bcm63xx_internal_irq_unmask(irq);
++ return 0;
++}
++
++/*
++ * external IRQs operations: mask/unmask and clear on PERF external
++ * irq control register.
++ */
++static void bcm63xx_external_irq_mask(unsigned int irq)
++{
++ u32 reg;
++
++ irq -= IRQ_EXT_BASE;
++ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
++ reg &= ~EXTIRQ_CFG_MASK(irq);
++ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
++}
++
++static void bcm63xx_external_irq_unmask(unsigned int irq)
++{
++ u32 reg;
++
++ irq -= IRQ_EXT_BASE;
++ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
++ reg |= EXTIRQ_CFG_MASK(irq);
++ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
++}
++
++static void bcm63xx_external_irq_clear(unsigned int irq)
++{
++ u32 reg;
++
++ irq -= IRQ_EXT_BASE;
++ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
++ reg |= EXTIRQ_CFG_CLEAR(irq);
++ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
++}
++
++static unsigned int bcm63xx_external_irq_startup(unsigned int irq)
++{
++ set_c0_status(0x100 << (irq - IRQ_MIPS_BASE));
++ irq_enable_hazard();
++ bcm63xx_external_irq_unmask(irq);
++ return 0;
++}
++
++static void bcm63xx_external_irq_shutdown(unsigned int irq)
++{
++ bcm63xx_external_irq_mask(irq);
++ clear_c0_status(0x100 << (irq - IRQ_MIPS_BASE));
++ irq_disable_hazard();
++}
++
++static int bcm63xx_external_irq_set_type(unsigned int irq,
++ unsigned int flow_type)
++{
++ u32 reg;
++ struct irq_desc *desc = irq_desc + irq;
++
++ irq -= IRQ_EXT_BASE;
++
++ flow_type &= IRQ_TYPE_SENSE_MASK;
++
++ if (flow_type == IRQ_TYPE_NONE)
++ flow_type = IRQ_TYPE_LEVEL_LOW;
++
++ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
++ switch (flow_type) {
++ case IRQ_TYPE_EDGE_BOTH:
++ reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
++ reg |= EXTIRQ_CFG_BOTHEDGE(irq);
++ break;
++
++ case IRQ_TYPE_EDGE_RISING:
++ reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
++ reg |= EXTIRQ_CFG_SENSE(irq);
++ reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
++ break;
++
++ case IRQ_TYPE_EDGE_FALLING:
++ reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
++ reg &= ~EXTIRQ_CFG_SENSE(irq);
++ reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
++ break;
++
++ case IRQ_TYPE_LEVEL_HIGH:
++ reg |= EXTIRQ_CFG_LEVELSENSE(irq);
++ reg |= EXTIRQ_CFG_SENSE(irq);
++ break;
++
++ case IRQ_TYPE_LEVEL_LOW:
++ reg |= EXTIRQ_CFG_LEVELSENSE(irq);
++ reg &= ~EXTIRQ_CFG_SENSE(irq);
++ break;
++
++ default:
++ printk(KERN_ERR "bogus flow type combination given !\n");
++ return -EINVAL;
++ }
++ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
++
++ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
++ desc->status |= IRQ_LEVEL;
++ desc->handle_irq = handle_level_irq;
++ } else {
++ desc->handle_irq = handle_edge_irq;
++ }
++
++ return 0;
++}
++
++static struct irq_chip bcm63xx_internal_irq_chip = {
++ .name = "bcm63xx_ipic",
++ .startup = bcm63xx_internal_irq_startup,
++ .shutdown = bcm63xx_internal_irq_mask,
++
++ .mask = bcm63xx_internal_irq_mask,
++ .mask_ack = bcm63xx_internal_irq_mask,
++ .unmask = bcm63xx_internal_irq_unmask,
++};
++
++static struct irq_chip bcm63xx_external_irq_chip = {
++ .name = "bcm63xx_epic",
++ .startup = bcm63xx_external_irq_startup,
++ .shutdown = bcm63xx_external_irq_shutdown,
++
++ .ack = bcm63xx_external_irq_clear,
++
++ .mask = bcm63xx_external_irq_mask,
++ .unmask = bcm63xx_external_irq_unmask,
++
++ .set_type = bcm63xx_external_irq_set_type,
++};
++
++static struct irqaction cpu_ip2_cascade_action = {
++ .handler = no_action,
++ .name = "cascade_ip2",
++};
++
++void __init arch_init_irq(void)
++{
++ int i;
++
++ mips_cpu_irq_init();
++ for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
++ set_irq_chip_and_handler(i, &bcm63xx_internal_irq_chip,
++ handle_level_irq);
++
++ for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i)
++ set_irq_chip_and_handler(i, &bcm63xx_external_irq_chip,
++ handle_edge_irq);
++
++ setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action);
++}
+diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
+new file mode 100644
+index 0000000..f0b49e8
+--- /dev/null
++++ b/arch/mips/bcm63xx/prom.c
+@@ -0,0 +1,43 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/bootmem.h>
++#include <asm/bootinfo.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++
++void __init prom_init(void)
++{
++ u32 reg, mask;
++
++ bcm63xx_cpu_init();
++
++ /* stop any running watchdog */
++ bcm_wdt_writel(WDT_STOP_1, WDT_CTL_REG);
++ bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
++
++ /* disable all hardware blocks clock for now */
++ if (BCMCPU_IS_6348())
++ mask = CKCTL_6348_ALL_SAFE_EN;
++ else
++ /* BCMCPU_IS_6358() */
++ mask = CKCTL_6358_ALL_SAFE_EN;
++
++ reg = bcm_perf_readl(PERF_CKCTL_REG);
++ reg &= ~mask;
++ bcm_perf_writel(reg, PERF_CKCTL_REG);
++
++ /* assign command line from kernel config */
++ strcpy(arcs_cmdline, CONFIG_CMDLINE);
++}
++
++void __init prom_free_prom_memory(void)
++{
++}
+diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
+new file mode 100644
+index 0000000..55c51a9
+--- /dev/null
++++ b/arch/mips/bcm63xx/setup.c
+@@ -0,0 +1,108 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/bootmem.h>
++#include <linux/ioport.h>
++#include <linux/pm.h>
++#include <asm/bootinfo.h>
++#include <asm/time.h>
++#include <asm/reboot.h>
++#include <asm/cacheflush.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++
++void bcm63xx_machine_halt(void)
++{
++ printk(KERN_INFO "System halted\n");
++ while (1);
++}
++
++static void bcm6348_a1_reboot(void)
++{
++ u32 reg;
++
++ /* soft reset all blocks */
++ printk(KERN_INFO "soft-reseting all blocks ...\n");
++ reg = bcm_perf_readl(PERF_SOFTRESET_REG);
++ reg &= ~SOFTRESET_6348_ALL;
++ bcm_perf_writel(reg, PERF_SOFTRESET_REG);
++ mdelay(10);
++
++ reg = bcm_perf_readl(PERF_SOFTRESET_REG);
++ reg |= SOFTRESET_6348_ALL;
++ bcm_perf_writel(reg, PERF_SOFTRESET_REG);
++ mdelay(10);
++
++ /* Jump to the power on address. */
++ printk(KERN_INFO "jumping to reset vector.\n");
++ /* set high vectors (base at 0xbfc00000 */
++ set_c0_status(ST0_BEV | ST0_ERL);
++ /* run uncached in kseg0 */
++ change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
++ __flush_cache_all();
++ /* remove all wired TLB entries */
++ write_c0_wired(0);
++ __asm__ __volatile__(
++ "jr\t%0"
++ :
++ : "r" (0xbfc00000));
++ while (1);
++}
++
++void bcm63xx_machine_reboot(void)
++{
++ u32 reg;
++
++ /* mask and clear all external irq */
++ reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
++ reg &= ~EXTIRQ_CFG_MASK_ALL;
++ reg |= EXTIRQ_CFG_CLEAR_ALL;
++ bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
++
++ if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
++ bcm6348_a1_reboot();
++
++ printk(KERN_INFO "triggering watchdog soft-reset...\n");
++ bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG);
++ while (1);
++}
++
++static void __bcm63xx_machine_reboot(char *p)
++{
++ bcm63xx_machine_reboot();
++}
++
++/*
++ * return system type in /proc/cpuinfo
++ */
++const char *get_system_type(void)
++{
++ static char buf[128];
++ sprintf(buf, "bcm963xx (0x%04x/0x%04X)",
++ bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
++ return buf;
++}
++
++void __init plat_time_init(void)
++{
++ mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
++}
++void __init plat_mem_setup(void)
++{
++ add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
++
++ _machine_halt = bcm63xx_machine_halt;
++ _machine_restart = __bcm63xx_machine_reboot;
++ pm_power_off = bcm63xx_machine_halt;
++
++ set_io_port_base(0);
++}
+diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
+new file mode 100644
+index 0000000..ba522bd
+--- /dev/null
++++ b/arch/mips/bcm63xx/timer.c
+@@ -0,0 +1,205 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/kernel.h>
++#include <linux/err.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_timer.h>
++#include <bcm63xx_regs.h>
++
++static DEFINE_SPINLOCK(timer_reg_lock);
++static DEFINE_SPINLOCK(timer_data_lock);
++static struct clk *periph_clk;
++
++static struct timer_data {
++ void (*cb)(void *);
++ void *data;
++} timer_data[BCM63XX_TIMER_COUNT];
++
++static irqreturn_t timer_interrupt(int irq, void *dev_id)
++{
++ u32 stat;
++ int i;
++
++ spin_lock(&timer_reg_lock);
++ stat = bcm_timer_readl(TIMER_IRQSTAT_REG);
++ bcm_timer_writel(stat, TIMER_IRQSTAT_REG);
++ spin_unlock(&timer_reg_lock);
++
++ for (i = 0; i < BCM63XX_TIMER_COUNT; i++) {
++ if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i)))
++ continue;
++
++ spin_lock(&timer_data_lock);
++ if (!timer_data[i].cb) {
++ spin_unlock(&timer_data_lock);
++ continue;
++ }
++
++ timer_data[i].cb(timer_data[i].data);
++ spin_unlock(&timer_data_lock);
++ }
++
++ return IRQ_HANDLED;
++}
++
++int bcm63xx_timer_enable(int id)
++{
++ u32 reg;
++ unsigned long flags;
++
++ if (id >= BCM63XX_TIMER_COUNT)
++ return -EINVAL;
++
++ spin_lock_irqsave(&timer_reg_lock, flags);
++
++ reg = bcm_timer_readl(TIMER_CTLx_REG(id));
++ reg |= TIMER_CTL_ENABLE_MASK;
++ bcm_timer_writel(reg, TIMER_CTLx_REG(id));
++
++ reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
++ reg |= TIMER_IRQSTAT_TIMER_IR_EN(id);
++ bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
++
++ spin_unlock_irqrestore(&timer_reg_lock, flags);
++ return 0;
++}
++
++EXPORT_SYMBOL(bcm63xx_timer_enable);
++
++int bcm63xx_timer_disable(int id)
++{
++ u32 reg;
++ unsigned long flags;
++
++ if (id >= BCM63XX_TIMER_COUNT)
++ return -EINVAL;
++
++ spin_lock_irqsave(&timer_reg_lock, flags);
++
++ reg = bcm_timer_readl(TIMER_CTLx_REG(id));
++ reg &= ~TIMER_CTL_ENABLE_MASK;
++ bcm_timer_writel(reg, TIMER_CTLx_REG(id));
++
++ reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
++ reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id);
++ bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
++
++ spin_unlock_irqrestore(&timer_reg_lock, flags);
++ return 0;
++}
++
++EXPORT_SYMBOL(bcm63xx_timer_disable);
++
++int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data)
++{
++ unsigned long flags;
++ int ret;
++
++ if (id >= BCM63XX_TIMER_COUNT || !callback)
++ return -EINVAL;
++
++ ret = 0;
++ spin_lock_irqsave(&timer_data_lock, flags);
++ if (timer_data[id].cb) {
++ ret = -EBUSY;
++ goto out;
++ }
++
++ timer_data[id].cb = callback;
++ timer_data[id].data = data;
++
++out:
++ spin_unlock_irqrestore(&timer_data_lock, flags);
++ return ret;
++}
++
++EXPORT_SYMBOL(bcm63xx_timer_register);
++
++void bcm63xx_timer_unregister(int id)
++{
++ unsigned long flags;
++
++ if (id >= BCM63XX_TIMER_COUNT)
++ return;
++
++ spin_lock_irqsave(&timer_data_lock, flags);
++ timer_data[id].cb = NULL;
++ spin_unlock_irqrestore(&timer_data_lock, flags);
++}
++
++EXPORT_SYMBOL(bcm63xx_timer_unregister);
++
++unsigned int bcm63xx_timer_countdown(unsigned int countdown_us)
++{
++ return (clk_get_rate(periph_clk) / (1000 * 1000)) * countdown_us;
++}
++
++EXPORT_SYMBOL(bcm63xx_timer_countdown);
++
++int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
++{
++ u32 reg, countdown;
++ unsigned long flags;
++
++ if (id >= BCM63XX_TIMER_COUNT)
++ return -EINVAL;
++
++ countdown = bcm63xx_timer_countdown(countdown_us);
++ if (countdown & ~TIMER_CTL_COUNTDOWN_MASK)
++ return -EINVAL;
++
++ spin_lock_irqsave(&timer_reg_lock, flags);
++ reg = bcm_timer_readl(TIMER_CTLx_REG(id));
++
++ if (monotonic)
++ reg &= ~TIMER_CTL_MONOTONIC_MASK;
++ else
++ reg |= TIMER_CTL_MONOTONIC_MASK;
++
++ reg &= ~TIMER_CTL_COUNTDOWN_MASK;
++ reg |= countdown;
++ bcm_timer_writel(reg, TIMER_CTLx_REG(id));
++
++ spin_unlock_irqrestore(&timer_reg_lock, flags);
++ return 0;
++}
++
++EXPORT_SYMBOL(bcm63xx_timer_set);
++
++int bcm63xx_timer_init(void)
++{
++ int ret, irq;
++ u32 reg;
++
++ reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
++ reg &= ~TIMER_IRQSTAT_TIMER0_IR_EN;
++ reg &= ~TIMER_IRQSTAT_TIMER1_IR_EN;
++ reg &= ~TIMER_IRQSTAT_TIMER2_IR_EN;
++ bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
++
++ periph_clk = clk_get(NULL, "periph");
++ if (IS_ERR(periph_clk))
++ return -ENODEV;
++
++ irq = bcm63xx_get_irq_number(IRQ_TIMER);
++ ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL);
++ if (ret) {
++ printk(KERN_ERR "bcm63xx_timer: failed to register irq\n");
++ return ret;
++ }
++
++ return 0;
++}
++
++arch_initcall(bcm63xx_timer_init);
+diff --git a/include/asm-mips/fixmap.h b/include/asm-mips/fixmap.h
+index 9cc8522..884c7a9 100644
+--- a/include/asm-mips/fixmap.h
++++ b/include/asm-mips/fixmap.h
+@@ -67,11 +67,15 @@ enum fixed_addresses {
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
++#ifdef CONFIG_BCM63XX
++#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000)
++#else
+ #if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
+ #define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000))
+ #else
+ #define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000)
+ #endif
++#endif
+ #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
+ #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
+
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_clk.h b/include/asm-mips/mach-bcm63xx/bcm63xx_clk.h
+new file mode 100644
+index 0000000..8fcf8df
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_clk.h
+@@ -0,0 +1,11 @@
++#ifndef BCM63XX_CLK_H_
++#define BCM63XX_CLK_H_
++
++struct clk {
++ void (*set)(struct clk *, int);
++ unsigned int rate;
++ unsigned int usage;
++ int id;
++};
++
++#endif /* ! BCM63XX_CLK_H_ */
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h b/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h
+new file mode 100644
+index 0000000..29b61fd
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h
+@@ -0,0 +1,314 @@
++#ifndef BCM63XX_CPU_H_
++#define BCM63XX_CPU_H_
++
++#include <linux/types.h>
++#include <linux/init.h>
++
++/*
++ * Macro to fetch bcm63xx cpu id and revision, should be optimized at
++ * compile time if only one CPU support is enabled (idea stolen from
++ * arm mach-types)
++ */
++#define BCM6348_CPU_ID 0x6348
++#define BCM6358_CPU_ID 0x6358
++
++void __init bcm63xx_cpu_init(void);
++u16 __bcm63xx_get_cpu_id(void);
++u16 bcm63xx_get_cpu_rev(void);
++unsigned int bcm63xx_get_cpu_freq(void);
++
++#ifdef CONFIG_BCM63XX_CPU_6348
++# ifdef bcm63xx_get_cpu_id
++# undef bcm63xx_get_cpu_id
++# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
++# define BCMCPU_RUNTIME_DETECT
++# else
++# define bcm63xx_get_cpu_id() BCM6348_CPU_ID
++# endif
++# define BCMCPU_IS_6348() (bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
++#else
++# define BCMCPU_IS_6348() (0)
++#endif
++
++#ifdef CONFIG_BCM63XX_CPU_6358
++# ifdef bcm63xx_get_cpu_id
++# undef bcm63xx_get_cpu_id
++# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
++# define BCMCPU_RUNTIME_DETECT
++# else
++# define bcm63xx_get_cpu_id() BCM6358_CPU_ID
++# endif
++# define BCMCPU_IS_6358() (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
++#else
++# define BCMCPU_IS_6358() (0)
++#endif
++
++#ifndef bcm63xx_get_cpu_id
++#error "No CPU support configured"
++#endif
++
++/*
++ * While registers sets are (mostly) the same across 63xx CPU, base
++ * address of these sets do change.
++ */
++enum bcm63xx_regs_set {
++ RSET_DSL_LMEM = 0,
++ RSET_PERF,
++ RSET_TIMER,
++ RSET_WDT,
++ RSET_UART0,
++ RSET_GPIO,
++ RSET_SPI,
++ RSET_UDC0,
++ RSET_OHCI0,
++ RSET_OHCI_PRIV,
++ RSET_USBH_PRIV,
++ RSET_MPI,
++ RSET_PCMCIA,
++ RSET_DSL,
++ RSET_ENET0,
++ RSET_ENET1,
++ RSET_ENETDMA,
++ RSET_EHCI0,
++ RSET_SDRAM,
++ RSET_MEMC,
++ RSET_DDR,
++};
++
++#define RSET_DSL_LMEM_SIZE (64 * 1024 * 4)
++#define RSET_DSL_SIZE 4096
++#define RSET_WDT_SIZE 12
++#define RSET_ENET_SIZE 2048
++#define RSET_ENETDMA_SIZE 2048
++#define RSET_UART_SIZE 24
++#define RSET_UDC_SIZE 256
++#define RSET_OHCI_SIZE 256
++#define RSET_EHCI_SIZE 256
++#define RSET_PCMCIA_SIZE 12
++
++/*
++ * 6348 register sets base address
++ */
++#define BCM_6348_DSL_LMEM_BASE (0xfff00000)
++#define BCM_6348_PERF_BASE (0xfffe0000)
++#define BCM_6348_TIMER_BASE (0xfffe0200)
++#define BCM_6348_WDT_BASE (0xfffe021c)
++#define BCM_6348_UART0_BASE (0xfffe0300)
++#define BCM_6348_GPIO_BASE (0xfffe0400)
++#define BCM_6348_SPI_BASE (0xfffe0c00)
++#define BCM_6348_UDC0_BASE (0xfffe1000)
++#define BCM_6348_OHCI0_BASE (0xfffe1b00)
++#define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00)
++#define BCM_6348_USBH_PRIV_BASE (0xdeadbeef)
++#define BCM_6348_MPI_BASE (0xfffe2000)
++#define BCM_6348_PCMCIA_BASE (0xfffe2054)
++#define BCM_6348_SDRAM_REGS_BASE (0xfffe2300)
++#define BCM_6348_DSL_BASE (0xfffe3000)
++#define BCM_6348_ENET0_BASE (0xfffe6000)
++#define BCM_6348_ENET1_BASE (0xfffe6800)
++#define BCM_6348_ENETDMA_BASE (0xfffe7000)
++#define BCM_6348_EHCI0_BASE (0xdeadbeef)
++#define BCM_6348_SDRAM_BASE (0xfffe2300)
++#define BCM_6348_MEMC_BASE (0xdeadbeef)
++#define BCM_6348_DDR_BASE (0xdeadbeef)
++
++/*
++ * 6358 register sets base address
++ */
++#define BCM_6358_DSL_LMEM_BASE (0xfff00000)
++#define BCM_6358_PERF_BASE (0xfffe0000)
++#define BCM_6358_TIMER_BASE (0xfffe0040)
++#define BCM_6358_WDT_BASE (0xfffe005c)
++#define BCM_6358_UART0_BASE (0xfffe0100)
++#define BCM_6358_GPIO_BASE (0xfffe0080)
++#define BCM_6358_SPI_BASE (0xdeadbeef)
++#define BCM_6358_UDC0_BASE (0xfffe0800)
++#define BCM_6358_OHCI0_BASE (0xfffe1400)
++#define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
++#define BCM_6358_USBH_PRIV_BASE (0xfffe1500)
++#define BCM_6358_MPI_BASE (0xfffe1000)
++#define BCM_6358_PCMCIA_BASE (0xfffe1054)
++#define BCM_6358_SDRAM_REGS_BASE (0xfffe2300)
++#define BCM_6358_DSL_BASE (0xfffe3000)
++#define BCM_6358_ENET0_BASE (0xfffe4000)
++#define BCM_6358_ENET1_BASE (0xfffe4800)
++#define BCM_6358_ENETDMA_BASE (0xfffe5000)
++#define BCM_6358_EHCI0_BASE (0xfffe1300)
++#define BCM_6358_SDRAM_BASE (0xdeadbeef)
++#define BCM_6358_MEMC_BASE (0xfffe1200)
++#define BCM_6358_DDR_BASE (0xfffe12a0)
++
++
++extern const unsigned long *bcm63xx_regs_base;
++
++static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
++{
++#ifdef BCMCPU_RUNTIME_DETECT
++ return bcm63xx_regs_base[set];
++#else
++#ifdef CONFIG_BCM63XX_CPU_6348
++ switch (set) {
++ case RSET_DSL_LMEM:
++ return BCM_6348_DSL_LMEM_BASE;
++ case RSET_PERF:
++ return BCM_6348_PERF_BASE;
++ case RSET_TIMER:
++ return BCM_6348_TIMER_BASE;
++ case RSET_WDT:
++ return BCM_6348_WDT_BASE;
++ case RSET_UART0:
++ return BCM_6348_UART0_BASE;
++ case RSET_GPIO:
++ return BCM_6348_GPIO_BASE;
++ case RSET_SPI:
++ return BCM_6348_SPI_BASE;
++ case RSET_UDC0:
++ return BCM_6348_UDC0_BASE;
++ case RSET_OHCI0:
++ return BCM_6348_OHCI0_BASE;
++ case RSET_OHCI_PRIV:
++ return BCM_6348_OHCI_PRIV_BASE;
++ case RSET_USBH_PRIV:
++ return BCM_6348_USBH_PRIV_BASE;
++ case RSET_MPI:
++ return BCM_6348_MPI_BASE;
++ case RSET_PCMCIA:
++ return BCM_6348_PCMCIA_BASE;
++ case RSET_DSL:
++ return BCM_6348_DSL_BASE;
++ case RSET_ENET0:
++ return BCM_6348_ENET0_BASE;
++ case RSET_ENET1:
++ return BCM_6348_ENET1_BASE;
++ case RSET_ENETDMA:
++ return BCM_6348_ENETDMA_BASE;
++ case RSET_EHCI0:
++ return BCM_6348_EHCI0_BASE;
++ case RSET_SDRAM:
++ return BCM_6348_SDRAM_BASE;
++ case RSET_MEMC:
++ return BCM_6348_MEMC_BASE;
++ case RSET_DDR:
++ return BCM_6348_DDR_BASE;
++ }
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6358
++ switch (set) {
++ case RSET_DSL_LMEM:
++ return BCM_6358_DSL_LMEM_BASE;
++ case RSET_PERF:
++ return BCM_6358_PERF_BASE;
++ case RSET_TIMER:
++ return BCM_6358_TIMER_BASE;
++ case RSET_WDT:
++ return BCM_6358_WDT_BASE;
++ case RSET_UART0:
++ return BCM_6358_UART0_BASE;
++ case RSET_GPIO:
++ return BCM_6358_GPIO_BASE;
++ case RSET_SPI:
++ return BCM_6358_SPI_BASE;
++ case RSET_UDC0:
++ return BCM_6358_UDC0_BASE;
++ case RSET_OHCI0:
++ return BCM_6358_OHCI0_BASE;
++ case RSET_OHCI_PRIV:
++ return BCM_6358_OHCI_PRIV_BASE;
++ case RSET_USBH_PRIV:
++ return BCM_6358_USBH_PRIV_BASE;
++ case RSET_MPI:
++ return BCM_6358_MPI_BASE;
++ case RSET_PCMCIA:
++ return BCM_6358_PCMCIA_BASE;
++ case RSET_ENET0:
++ return BCM_6358_ENET0_BASE;
++ case RSET_ENET1:
++ return BCM_6358_ENET1_BASE;
++ case RSET_ENETDMA:
++ return BCM_6358_ENETDMA_BASE;
++ case RSET_DSL:
++ return BCM_6358_DSL_BASE;
++ case RSET_EHCI0:
++ return BCM_6358_EHCI0_BASE;
++ case RSET_SDRAM:
++ return BCM_6358_SDRAM_BASE;
++ case RSET_MEMC:
++ return BCM_6358_MEMC_BASE;
++ case RSET_DDR:
++ return BCM_6358_DDR_BASE;
++ }
++#endif
++#endif
++ /* unreached */
++ return 0;
++}
++
++/*
++ * IRQ number changes across CPU too
++ */
++enum bcm63xx_irq {
++ IRQ_TIMER = 0,
++ IRQ_UART0,
++ IRQ_DSL,
++ IRQ_ENET0,
++ IRQ_ENET1,
++ IRQ_ENET_PHY,
++ IRQ_OHCI0,
++ IRQ_EHCI0,
++ IRQ_PCMCIA0,
++ IRQ_ENET0_RXDMA,
++ IRQ_ENET0_TXDMA,
++ IRQ_ENET1_RXDMA,
++ IRQ_ENET1_TXDMA,
++ IRQ_PCI,
++ IRQ_PCMCIA,
++};
++
++/*
++ * 6348 irqs
++ */
++#define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
++#define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
++#define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
++#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7)
++#define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
++#define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
++#define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12)
++#define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20)
++#define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21)
++#define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22)
++#define BCM_6348_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 23)
++#define BCM_6348_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24)
++#define BCM_6348_PCI_IRQ (IRQ_INTERNAL_BASE + 24)
++
++/*
++ * 6358 irqs
++ */
++#define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
++#define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
++#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
++#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6)
++#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
++#define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
++#define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
++#define BCM_6358_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15)
++#define BCM_6358_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16)
++#define BCM_6358_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 17)
++#define BCM_6358_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 18)
++#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29)
++#define BCM_6358_PCI_IRQ (IRQ_INTERNAL_BASE + 31)
++#define BCM_6358_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24)
++
++extern const int *bcm63xx_irqs;
++
++static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq)
++{
++ return bcm63xx_irqs[irq];
++}
++
++/*
++ * return installed memory size
++ */
++unsigned int bcm63xx_get_memory_size(void);
++
++#endif /* !BCM63XX_CPU_H_ */
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_cs.h b/include/asm-mips/mach-bcm63xx/bcm63xx_cs.h
+new file mode 100644
+index 0000000..b1821c8
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_cs.h
+@@ -0,0 +1,10 @@
++#ifndef BCM63XX_CS_H
++#define BCM63XX_CS_H
++
++int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size);
++int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait,
++ unsigned int setup, unsigned int hold);
++int bcm63xx_set_cs_param(unsigned int cs, u32 flags);
++int bcm63xx_set_cs_status(unsigned int cs, int enable);
++
++#endif /* !BCM63XX_CS_H */
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h b/include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h
+new file mode 100644
+index 0000000..31145df
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h
+@@ -0,0 +1,14 @@
++#ifndef BCM63XX_GPIO_H
++#define BCM63XX_GPIO_H
++
++/* all helpers will BUG() if gpio count is >= 37. */
++#define BCM63XX_GPIO_COUNT 37
++
++void bcm63xx_gpio_set_dataout(int gpio, int val);
++int bcm63xx_gpio_get_datain(int gpio);
++void bcm63xx_gpio_set_direction(int gpio, int dir);
++
++#define GPIO_DIR_OUT 0x0
++#define GPIO_DIR_IN 0x1
++
++#endif /* !BCM63XX_GPIO_H */
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_io.h b/include/asm-mips/mach-bcm63xx/bcm63xx_io.h
+new file mode 100644
+index 0000000..1aef06f
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_io.h
+@@ -0,0 +1,93 @@
++#ifndef BCM63XX_IO_H_
++#define BCM63XX_IO_H_
++
++#include "bcm63xx_cpu.h"
++
++/*
++ * Physical memory map, RAM is mapped at 0x0.
++ *
++ * Note that size MUST be a power of two.
++ */
++#define BCM_PCMCIA_COMMON_BASE_PA (0x20000000)
++#define BCM_PCMCIA_COMMON_SIZE (16 * 1024 * 1024)
++#define BCM_PCMCIA_COMMON_END_PA (BCM_PCMCIA_COMMON_BASE_PA + \
++ BCM_PCMCIA_COMMON_SIZE - 1)
++
++#define BCM_PCMCIA_ATTR_BASE_PA (0x21000000)
++#define BCM_PCMCIA_ATTR_SIZE (16 * 1024 * 1024)
++#define BCM_PCMCIA_ATTR_END_PA (BCM_PCMCIA_ATTR_BASE_PA + \
++ BCM_PCMCIA_ATTR_SIZE - 1)
++
++#define BCM_PCMCIA_IO_BASE_PA (0x22000000)
++#define BCM_PCMCIA_IO_SIZE (64 * 1024)
++#define BCM_PCMCIA_IO_END_PA (BCM_PCMCIA_IO_BASE_PA + \
++ BCM_PCMCIA_IO_SIZE - 1)
++
++#define BCM_PCI_MEM_BASE_PA (0x30000000)
++#define BCM_PCI_MEM_SIZE (128 * 1024 * 1024)
++#define BCM_PCI_MEM_END_PA (BCM_PCI_MEM_BASE_PA + \
++ BCM_PCI_MEM_SIZE - 1)
++
++#define BCM_PCI_IO_BASE_PA (0x08000000)
++#define BCM_PCI_IO_SIZE (64 * 1024)
++#define BCM_PCI_IO_END_PA (BCM_PCI_IO_BASE_PA + \
++ BCM_PCI_IO_SIZE - 1)
++#define BCM_PCI_IO_HALF_PA (BCM_PCI_IO_BASE_PA + \
++ (BCM_PCI_IO_SIZE / 2) - 1)
++
++#define BCM_CB_MEM_BASE_PA (0x38000000)
++#define BCM_CB_MEM_SIZE (128 * 1024 * 1024)
++#define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \
++ BCM_CB_MEM_SIZE - 1)
++
++
++/*
++ * Internal registers are accessed through KSEG3
++ */
++#define BCM_REGS_VA(x) ((void __iomem *)(x))
++
++#define bcm_readb(a) (*(volatile unsigned char *) BCM_REGS_VA(a))
++#define bcm_readw(a) (*(volatile unsigned short *) BCM_REGS_VA(a))
++#define bcm_readl(a) (*(volatile unsigned int *) BCM_REGS_VA(a))
++#define bcm_writeb(v,a) (*(volatile unsigned char *) BCM_REGS_VA((a)) = (v))
++#define bcm_writew(v,a) (*(volatile unsigned short *) BCM_REGS_VA((a)) = (v))
++#define bcm_writel(v,a) (*(volatile unsigned int *) BCM_REGS_VA((a)) = (v))
++
++/*
++ * IO helpers to access register set for current CPU
++ */
++#define bcm_rset_readb(s,o) bcm_readb(bcm63xx_regset_address(s) + (o))
++#define bcm_rset_readw(s,o) bcm_readw(bcm63xx_regset_address(s) + (o))
++#define bcm_rset_readl(s,o) bcm_readl(bcm63xx_regset_address(s) + (o))
++#define bcm_rset_writeb(s,v,o) bcm_writeb((v), \
++ bcm63xx_regset_address(s) + (o))
++#define bcm_rset_writew(s,v,o) bcm_writew((v), \
++ bcm63xx_regset_address(s) + (o))
++#define bcm_rset_writel(s,v,o) bcm_writel((v), \
++ bcm63xx_regset_address(s) + (o))
++
++/*
++ * helpers for frequently used register sets
++ */
++#define bcm_perf_readl(o) bcm_rset_readl(RSET_PERF, (o))
++#define bcm_perf_writel(v,o) bcm_rset_writel(RSET_PERF, (v), (o))
++#define bcm_timer_readl(o) bcm_rset_readl(RSET_TIMER, (o))
++#define bcm_timer_writel(v,o) bcm_rset_writel(RSET_TIMER, (v), (o))
++#define bcm_wdt_readl(o) bcm_rset_readl(RSET_WDT, (o))
++#define bcm_wdt_writel(v,o) bcm_rset_writel(RSET_WDT, (v), (o))
++#define bcm_gpio_readl(o) bcm_rset_readl(RSET_GPIO, (o))
++#define bcm_gpio_writel(v,o) bcm_rset_writel(RSET_GPIO, (v), (o))
++#define bcm_uart0_readl(o) bcm_rset_readl(RSET_UART0, (o))
++#define bcm_uart0_writel(v,o) bcm_rset_writel(RSET_UART0, (v), (o))
++#define bcm_mpi_readl(o) bcm_rset_readl(RSET_MPI, (o))
++#define bcm_mpi_writel(v,o) bcm_rset_writel(RSET_MPI, (v), (o))
++#define bcm_pcmcia_readl(o) bcm_rset_readl(RSET_PCMCIA, (o))
++#define bcm_pcmcia_writel(v,o) bcm_rset_writel(RSET_PCMCIA, (v), (o))
++#define bcm_sdram_readl(o) bcm_rset_readl(RSET_SDRAM, (o))
++#define bcm_sdram_writel(v,o) bcm_rset_writel(RSET_SDRAM, (v), (o))
++#define bcm_memc_readl(o) bcm_rset_readl(RSET_MEMC, (o))
++#define bcm_memc_writel(v,o) bcm_rset_writel(RSET_MEMC, (v), (o))
++#define bcm_ddr_readl(o) bcm_rset_readl(RSET_DDR, (o))
++#define bcm_ddr_writel(v,o) bcm_rset_writel(RSET_DDR, (v), (o))
++
++#endif /* ! BCM63XX_IO_H_ */
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_irq.h b/include/asm-mips/mach-bcm63xx/bcm63xx_irq.h
+new file mode 100644
+index 0000000..5f95577
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_irq.h
+@@ -0,0 +1,15 @@
++#ifndef BCM63XX_IRQ_H_
++#define BCM63XX_IRQ_H_
++
++#include <bcm63xx_cpu.h>
++
++#define IRQ_MIPS_BASE 0
++#define IRQ_INTERNAL_BASE 8
++
++#define IRQ_EXT_BASE (IRQ_MIPS_BASE + 3)
++#define IRQ_EXT_0 (IRQ_EXT_BASE + 0)
++#define IRQ_EXT_1 (IRQ_EXT_BASE + 1)
++#define IRQ_EXT_2 (IRQ_EXT_BASE + 2)
++#define IRQ_EXT_3 (IRQ_EXT_BASE + 3)
++
++#endif /* ! BCM63XX_IRQ_H_ */
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h b/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h
+new file mode 100644
+index 0000000..b5562b1
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h
+@@ -0,0 +1,728 @@
++#ifndef BCM63XX_REGS_H_
++#define BCM63XX_REGS_H_
++
++/*************************************************************************
++ * _REG relative to RSET_PERF
++ *************************************************************************/
++
++/* Chip Identifier / Revision register */
++#define PERF_REV_REG 0x0
++#define REV_CHIPID_SHIFT 16
++#define REV_CHIPID_MASK (0xffff << REV_CHIPID_SHIFT)
++#define REV_REVID_SHIFT 0
++#define REV_REVID_MASK (0xffff << REV_REVID_SHIFT)
++
++/* Clock Control register */
++#define PERF_CKCTL_REG 0x4
++
++#define CKCTL_6348_ADSLPHY_EN (1 << 0)
++#define CKCTL_6348_MPI_EN (1 << 1)
++#define CKCTL_6348_SDRAM_EN (1 << 2)
++#define CKCTL_6348_M2M_EN (1 << 3)
++#define CKCTL_6348_ENET_EN (1 << 4)
++#define CKCTL_6348_SAR_EN (1 << 5)
++#define CKCTL_6348_USBS_EN (1 << 6)
++#define CKCTL_6348_USBH_EN (1 << 8)
++#define CKCTL_6348_SPI_EN (1 << 9)
++
++#define CKCTL_6348_ALL_SAFE_EN (CKCTL_6348_ADSLPHY_EN | \
++ CKCTL_6348_M2M_EN | \
++ CKCTL_6348_ENET_EN | \
++ CKCTL_6348_SAR_EN | \
++ CKCTL_6348_USBS_EN | \
++ CKCTL_6348_USBH_EN | \
++ CKCTL_6348_SPI_EN)
++
++#define CKCTL_6358_ENET_EN (1 << 4)
++#define CKCTL_6358_ADSLPHY_EN (1 << 5)
++#define CKCTL_6358_PCM_EN (1 << 8)
++#define CKCTL_6358_SPI_EN (1 << 9)
++#define CKCTL_6358_USBS_EN (1 << 10)
++#define CKCTL_6358_SAR_EN (1 << 11)
++#define CKCTL_6358_EMUSB_EN (1 << 17)
++#define CKCTL_6358_ENET0_EN (1 << 18)
++#define CKCTL_6358_ENET1_EN (1 << 19)
++#define CKCTL_6358_USBSU_EN (1 << 20)
++#define CKCTL_6358_EPHY_EN (1 << 21)
++
++#define CKCTL_6358_ALL_SAFE_EN (CKCTL_6358_ENET_EN | \
++ CKCTL_6358_ADSLPHY_EN | \
++ CKCTL_6358_PCM_EN | \
++ CKCTL_6358_SPI_EN | \
++ CKCTL_6358_USBS_EN | \
++ CKCTL_6358_SAR_EN | \
++ CKCTL_6358_EMUSB_EN | \
++ CKCTL_6358_ENET0_EN | \
++ CKCTL_6358_ENET1_EN | \
++ CKCTL_6358_USBSU_EN | \
++ CKCTL_6358_EPHY_EN)
++
++/* System PLL Control register */
++#define PERF_SYS_PLL_CTL_REG 0x8
++#define SYS_PLL_SOFT_RESET 0x1
++
++/* Interrupt Mask register */
++#define PERF_IRQMASK_REG 0xc
++#define PERF_IRQSTAT_REG 0x10
++
++/* Interrupt Status register */
++#define PERF_IRQSTAT_REG 0x10
++
++/* External Interrupt Configuration register */
++#define PERF_EXTIRQ_CFG_REG 0x14
++#define EXTIRQ_CFG_SENSE(x) (1 << (x))
++#define EXTIRQ_CFG_STAT(x) (1 << (x + 5))
++#define EXTIRQ_CFG_CLEAR(x) (1 << (x + 10))
++#define EXTIRQ_CFG_MASK(x) (1 << (x + 15))
++#define EXTIRQ_CFG_BOTHEDGE(x) (1 << (x + 20))
++#define EXTIRQ_CFG_LEVELSENSE(x) (1 << (x + 25))
++
++#define EXTIRQ_CFG_CLEAR_ALL (0xf << 10)
++#define EXTIRQ_CFG_MASK_ALL (0xf << 15)
++
++/* Soft Reset register */
++#define PERF_SOFTRESET_REG 0x28
++
++#define SOFTRESET_6348_SPI_MASK (1 << 0)
++#define SOFTRESET_6348_ENET_MASK (1 << 2)
++#define SOFTRESET_6348_USBH_MASK (1 << 3)
++#define SOFTRESET_6348_USBS_MASK (1 << 4)
++#define SOFTRESET_6348_ADSL_MASK (1 << 5)
++#define SOFTRESET_6348_DMAMEM_MASK (1 << 6)
++#define SOFTRESET_6348_SAR_MASK (1 << 7)
++#define SOFTRESET_6348_ACLC_MASK (1 << 8)
++#define SOFTRESET_6348_ADSLMIPSPLL_MASK (1 << 10)
++
++#define SOFTRESET_6348_ALL (SOFTRESET_6348_SPI_MASK | \
++ SOFTRESET_6348_ENET_MASK | \
++ SOFTRESET_6348_USBH_MASK | \
++ SOFTRESET_6348_USBS_MASK | \
++ SOFTRESET_6348_ADSL_MASK | \
++ SOFTRESET_6348_DMAMEM_MASK | \
++ SOFTRESET_6348_SAR_MASK | \
++ SOFTRESET_6348_ACLC_MASK | \
++ SOFTRESET_6348_ADSLMIPSPLL_MASK)
++
++/* MIPS PLL control register */
++#define PERF_MIPSPLLCTL_REG 0x34
++#define MIPSPLLCTL_N1_SHIFT 20
++#define MIPSPLLCTL_N1_MASK (0x7 << MIPSPLLCTL_N1_SHIFT)
++#define MIPSPLLCTL_N2_SHIFT 15
++#define MIPSPLLCTL_N2_MASK (0x1f << MIPSPLLCTL_N2_SHIFT)
++#define MIPSPLLCTL_M1REF_SHIFT 12
++#define MIPSPLLCTL_M1REF_MASK (0x7 << MIPSPLLCTL_M1REF_SHIFT)
++#define MIPSPLLCTL_M2REF_SHIFT 9
++#define MIPSPLLCTL_M2REF_MASK (0x7 << MIPSPLLCTL_M2REF_SHIFT)
++#define MIPSPLLCTL_M1CPU_SHIFT 6
++#define MIPSPLLCTL_M1CPU_MASK (0x7 << MIPSPLLCTL_M1CPU_SHIFT)
++#define MIPSPLLCTL_M1BUS_SHIFT 3
++#define MIPSPLLCTL_M1BUS_MASK (0x7 << MIPSPLLCTL_M1BUS_SHIFT)
++#define MIPSPLLCTL_M2BUS_SHIFT 0
++#define MIPSPLLCTL_M2BUS_MASK (0x7 << MIPSPLLCTL_M2BUS_SHIFT)
++
++/* ADSL PHY PLL Control register */
++#define PERF_ADSLPLLCTL_REG 0x38
++#define ADSLPLLCTL_N1_SHIFT 20
++#define ADSLPLLCTL_N1_MASK (0x7 << ADSLPLLCTL_N1_SHIFT)
++#define ADSLPLLCTL_N2_SHIFT 15
++#define ADSLPLLCTL_N2_MASK (0x1f << ADSLPLLCTL_N2_SHIFT)
++#define ADSLPLLCTL_M1REF_SHIFT 12
++#define ADSLPLLCTL_M1REF_MASK (0x7 << ADSLPLLCTL_M1REF_SHIFT)
++#define ADSLPLLCTL_M2REF_SHIFT 9
++#define ADSLPLLCTL_M2REF_MASK (0x7 << ADSLPLLCTL_M2REF_SHIFT)
++#define ADSLPLLCTL_M1CPU_SHIFT 6
++#define ADSLPLLCTL_M1CPU_MASK (0x7 << ADSLPLLCTL_M1CPU_SHIFT)
++#define ADSLPLLCTL_M1BUS_SHIFT 3
++#define ADSLPLLCTL_M1BUS_MASK (0x7 << ADSLPLLCTL_M1BUS_SHIFT)
++#define ADSLPLLCTL_M2BUS_SHIFT 0
++#define ADSLPLLCTL_M2BUS_MASK (0x7 << ADSLPLLCTL_M2BUS_SHIFT)
++
++#define ADSLPLLCTL_VAL(n1,n2,m1ref,m2ref,m1cpu,m1bus,m2bus) \
++ (((n1) << ADSLPLLCTL_N1_SHIFT) | \
++ ((n2) << ADSLPLLCTL_N2_SHIFT) | \
++ ((m1ref) << ADSLPLLCTL_M1REF_SHIFT) | \
++ ((m2ref) << ADSLPLLCTL_M2REF_SHIFT) | \
++ ((m1cpu) << ADSLPLLCTL_M1CPU_SHIFT) | \
++ ((m1bus) << ADSLPLLCTL_M1BUS_SHIFT) | \
++ ((m2bus) << ADSLPLLCTL_M2BUS_SHIFT))
++
++
++/*************************************************************************
++ * _REG relative to RSET_TIMER
++ *************************************************************************/
++
++#define BCM63XX_TIMER_COUNT 4
++#define TIMER_T0_ID 0
++#define TIMER_T1_ID 1
++#define TIMER_T2_ID 2
++#define TIMER_WDT_ID 3
++
++/* Timer irqstat register */
++#define TIMER_IRQSTAT_REG 0
++#define TIMER_IRQSTAT_TIMER_CAUSE(x) (1 << (x))
++#define TIMER_IRQSTAT_TIMER0_CAUSE (1 << 0)
++#define TIMER_IRQSTAT_TIMER1_CAUSE (1 << 1)
++#define TIMER_IRQSTAT_TIMER2_CAUSE (1 << 2)
++#define TIMER_IRQSTAT_WDT_CAUSE (1 << 3)
++#define TIMER_IRQSTAT_TIMER_IR_EN(x) (1 << ((x) + 8))
++#define TIMER_IRQSTAT_TIMER0_IR_EN (1 << 8)
++#define TIMER_IRQSTAT_TIMER1_IR_EN (1 << 9)
++#define TIMER_IRQSTAT_TIMER2_IR_EN (1 << 10)
++
++/* Timer control register */
++#define TIMER_CTLx_REG(x) (0x4 + (x * 4))
++#define TIMER_CTL0_REG 0x4
++#define TIMER_CTL1_REG 0x8
++#define TIMER_CTL2_REG 0xC
++#define TIMER_CTL_COUNTDOWN_MASK (0x3fffffff)
++#define TIMER_CTL_MONOTONIC_MASK (1 << 30)
++#define TIMER_CTL_ENABLE_MASK (1 << 31)
++
++
++/*************************************************************************
++ * _REG relative to RSET_WDT
++ *************************************************************************/
++
++/* Watchdog default count register */
++#define WDT_DEFVAL_REG 0x0
++
++/* Watchdog control register */
++#define WDT_CTL_REG 0x4
++
++/* Watchdog control register constants */
++#define WDT_START_1 (0xff00)
++#define WDT_START_2 (0x00ff)
++#define WDT_STOP_1 (0xee00)
++#define WDT_STOP_2 (0x00ee)
++
++/* Watchdog reset length register */
++#define WDT_RSTLEN_REG 0x8
++
++
++/*************************************************************************
++ * _REG relative to RSET_UARTx
++ *************************************************************************/
++
++/* UART Control Register */
++#define UART_CTL_REG 0x0
++#define UART_CTL_RXTMOUTCNT_SHIFT 0
++#define UART_CTL_RXTMOUTCNT_MASK (0x1f << UART_CTL_RXTMOUTCNT_SHIFT)
++#define UART_CTL_RSTTXDN_SHIFT 5
++#define UART_CTL_RSTTXDN_MASK (1 << UART_CTL_RSTTXDN_SHIFT)
++#define UART_CTL_RSTRXFIFO_SHIFT 6
++#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT)
++#define UART_CTL_RSTTXFIFO_SHIFT 7
++#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT)
++#define UART_CTL_STOPBITS_SHIFT 8
++#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT)
++#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT)
++#define UART_CTL_STOPBITS_2 (0xf << UART_CTL_STOPBITS_SHIFT)
++#define UART_CTL_BITSPERSYM_SHIFT 12
++#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT)
++#define UART_CTL_XMITBRK_SHIFT 14
++#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT)
++#define UART_CTL_RSVD_SHIFT 15
++#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT)
++#define UART_CTL_RXPAREVEN_SHIFT 16
++#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT)
++#define UART_CTL_RXPAREN_SHIFT 17
++#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT)
++#define UART_CTL_TXPAREVEN_SHIFT 18
++#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT)
++#define UART_CTL_TXPAREN_SHIFT 18
++#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT)
++#define UART_CTL_LOOPBACK_SHIFT 20
++#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT)
++#define UART_CTL_RXEN_SHIFT 21
++#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT)
++#define UART_CTL_TXEN_SHIFT 22
++#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT)
++#define UART_CTL_BRGEN_SHIFT 23
++#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT)
++
++/* UART Baudword register */
++#define UART_BAUD_REG 0x4
++
++/* UART Misc Control register */
++#define UART_MCTL_REG 0x8
++#define UART_MCTL_DTR_SHIFT 0
++#define UART_MCTL_DTR_MASK (1 << UART_MCTL_DTR_SHIFT)
++#define UART_MCTL_RTS_SHIFT 1
++#define UART_MCTL_RTS_MASK (1 << UART_MCTL_RTS_SHIFT)
++#define UART_MCTL_RXFIFOTHRESH_SHIFT 8
++#define UART_MCTL_RXFIFOTHRESH_MASK (0xf << UART_MCTL_RXFIFOTHRESH_SHIFT)
++#define UART_MCTL_TXFIFOTHRESH_SHIFT 12
++#define UART_MCTL_TXFIFOTHRESH_MASK (0xf << UART_MCTL_TXFIFOTHRESH_SHIFT)
++#define UART_MCTL_RXFIFOFILL_SHIFT 16
++#define UART_MCTL_RXFIFOFILL_MASK (0x1f << UART_MCTL_RXFIFOFILL_SHIFT)
++#define UART_MCTL_TXFIFOFILL_SHIFT 24
++#define UART_MCTL_TXFIFOFILL_MASK (0x1f << UART_MCTL_TXFIFOFILL_SHIFT)
++
++/* UART External Input Configuration register */
++#define UART_EXTINP_REG 0xc
++#define UART_EXTINP_RI_SHIFT 0
++#define UART_EXTINP_RI_MASK (1 << UART_EXTINP_RI_SHIFT)
++#define UART_EXTINP_CTS_SHIFT 1
++#define UART_EXTINP_CTS_MASK (1 << UART_EXTINP_CTS_SHIFT)
++#define UART_EXTINP_DCD_SHIFT 2
++#define UART_EXTINP_DCD_MASK (1 << UART_EXTINP_DCD_SHIFT)
++#define UART_EXTINP_DSR_SHIFT 3
++#define UART_EXTINP_DSR_MASK (1 << UART_EXTINP_DSR_SHIFT)
++#define UART_EXTINP_IRSTAT(x) (1 << (x + 4))
++#define UART_EXTINP_IRMASK(x) (1 << (x + 8))
++#define UART_EXTINP_IR_RI 0
++#define UART_EXTINP_IR_CTS 1
++#define UART_EXTINP_IR_DCD 2
++#define UART_EXTINP_IR_DSR 3
++#define UART_EXTINP_RI_NOSENSE_SHIFT 16
++#define UART_EXTINP_RI_NOSENSE_MASK (1 << UART_EXTINP_RI_NOSENSE_SHIFT)
++#define UART_EXTINP_CTS_NOSENSE_SHIFT 17
++#define UART_EXTINP_CTS_NOSENSE_MASK (1 << UART_EXTINP_CTS_NOSENSE_SHIFT)
++#define UART_EXTINP_DCD_NOSENSE_SHIFT 18
++#define UART_EXTINP_DCD_NOSENSE_MASK (1 << UART_EXTINP_DCD_NOSENSE_SHIFT)
++#define UART_EXTINP_DSR_NOSENSE_SHIFT 19
++#define UART_EXTINP_DSR_NOSENSE_MASK (1 << UART_EXTINP_DSR_NOSENSE_SHIFT)
++
++/* UART Interrupt register */
++#define UART_IR_REG 0x10
++#define UART_IR_MASK(x) (1 << (x + 16))
++#define UART_IR_STAT(x) (1 << (x))
++#define UART_IR_EXTIP 0
++#define UART_IR_TXUNDER 1
++#define UART_IR_TXOVER 2
++#define UART_IR_TXTRESH 3
++#define UART_IR_TXRDLATCH 4
++#define UART_IR_TXEMPTY 5
++#define UART_IR_RXUNDER 6
++#define UART_IR_RXOVER 7
++#define UART_IR_RXTIMEOUT 8
++#define UART_IR_RXFULL 9
++#define UART_IR_RXTHRESH 10
++#define UART_IR_RXNOTEMPTY 11
++#define UART_IR_RXFRAMEERR 12
++#define UART_IR_RXPARERR 13
++#define UART_IR_RXBRK 14
++#define UART_IR_TXDONE 15
++
++/* UART Fifo register */
++#define UART_FIFO_REG 0x14
++#define UART_FIFO_VALID_SHIFT 0
++#define UART_FIFO_VALID_MASK 0xff
++#define UART_FIFO_FRAMEERR_SHIFT 8
++#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT)
++#define UART_FIFO_PARERR_SHIFT 9
++#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT)
++#define UART_FIFO_BRKDET_SHIFT 10
++#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT)
++#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \
++ UART_FIFO_PARERR_MASK | \
++ UART_FIFO_BRKDET_MASK)
++
++
++/*************************************************************************
++ * _REG relative to RSET_GPIO
++ *************************************************************************/
++
++/* GPIO registers */
++#define GPIO_CTL_HI_REG 0x0
++#define GPIO_CTL_LO_REG 0x4
++#define GPIO_DATA_HI_REG 0x8
++#define GPIO_DATA_LO_REG 0xC
++
++/* GPIO mux registers and constants */
++#define GPIO_MODE_REG 0x18
++
++#define GPIO_MODE_6348_G4_DIAG 0x00090000
++#define GPIO_MODE_6348_G4_UTOPIA 0x00080000
++#define GPIO_MODE_6348_G4_LEGACY_LED 0x00030000
++#define GPIO_MODE_6348_G4_MII_SNOOP 0x00020000
++#define GPIO_MODE_6348_G4_EXT_EPHY 0x00010000
++#define GPIO_MODE_6348_G3_DIAG 0x00009000
++#define GPIO_MODE_6348_G3_UTOPIA 0x00008000
++#define GPIO_MODE_6348_G3_EXT_MII 0x00007000
++#define GPIO_MODE_6348_G2_DIAG 0x00000900
++#define GPIO_MODE_6348_G2_PCI 0x00000500
++#define GPIO_MODE_6348_G1_DIAG 0x00000090
++#define GPIO_MODE_6348_G1_UTOPIA 0x00000080
++#define GPIO_MODE_6348_G1_SPI_UART 0x00000060
++#define GPIO_MODE_6348_G1_SPI_MASTER 0x00000060
++#define GPIO_MODE_6348_G1_MII_PCCARD 0x00000040
++#define GPIO_MODE_6348_G1_MII_SNOOP 0x00000020
++#define GPIO_MODE_6348_G1_EXT_EPHY 0x00000010
++#define GPIO_MODE_6348_G0_DIAG 0x00000009
++#define GPIO_MODE_6348_G0_EXT_MII 0x00000007
++
++#define GPIO_MODE_6358_EXTRACS (1 << 5)
++#define GPIO_MODE_6358_UART1 (1 << 6)
++#define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7)
++#define GPIO_MODE_6358_SERIAL_LED (1 << 10)
++#define GPIO_MODE_6358_UTOPIA (1 << 12)
++
++
++/*************************************************************************
++ * _REG relative to RSET_ENET
++ *************************************************************************/
++
++/* Receiver Configuration register */
++#define ENET_RXCFG_REG 0x0
++#define ENET_RXCFG_ALLMCAST_SHIFT 1
++#define ENET_RXCFG_ALLMCAST_MASK (1 << ENET_RXCFG_ALLMCAST_SHIFT)
++#define ENET_RXCFG_PROMISC_SHIFT 3
++#define ENET_RXCFG_PROMISC_MASK (1 << ENET_RXCFG_PROMISC_SHIFT)
++#define ENET_RXCFG_LOOPBACK_SHIFT 4
++#define ENET_RXCFG_LOOPBACK_MASK (1 << ENET_RXCFG_LOOPBACK_SHIFT)
++#define ENET_RXCFG_ENFLOW_SHIFT 5
++#define ENET_RXCFG_ENFLOW_MASK (1 << ENET_RXCFG_ENFLOW_SHIFT)
++
++/* Receive Maximum Length register */
++#define ENET_RXMAXLEN_REG 0x4
++#define ENET_RXMAXLEN_SHIFT 0
++#define ENET_RXMAXLEN_MASK (0x7ff << ENET_RXMAXLEN_SHIFT)
++
++/* Transmit Maximum Length register */
++#define ENET_TXMAXLEN_REG 0x8
++#define ENET_TXMAXLEN_SHIFT 0
++#define ENET_TXMAXLEN_MASK (0x7ff << ENET_TXMAXLEN_SHIFT)
++
++/* MII Status/Control register */
++#define ENET_MIISC_REG 0x10
++#define ENET_MIISC_MDCFREQDIV_SHIFT 0
++#define ENET_MIISC_MDCFREQDIV_MASK (0x7f << ENET_MIISC_MDCFREQDIV_SHIFT)
++#define ENET_MIISC_PREAMBLEEN_SHIFT 7
++#define ENET_MIISC_PREAMBLEEN_MASK (1 << ENET_MIISC_PREAMBLEEN_SHIFT)
++
++/* MII Data register */
++#define ENET_MIIDATA_REG 0x14
++#define ENET_MIIDATA_DATA_SHIFT 0
++#define ENET_MIIDATA_DATA_MASK (0xffff << ENET_MIIDATA_DATA_SHIFT)
++#define ENET_MIIDATA_TA_SHIFT 16
++#define ENET_MIIDATA_TA_MASK (0x3 << ENET_MIIDATA_TA_SHIFT)
++#define ENET_MIIDATA_REG_SHIFT 18
++#define ENET_MIIDATA_REG_MASK (0x1f << ENET_MIIDATA_REG_SHIFT)
++#define ENET_MIIDATA_PHYID_SHIFT 23
++#define ENET_MIIDATA_PHYID_MASK (0x1f << ENET_MIIDATA_PHYID_SHIFT)
++#define ENET_MIIDATA_OP_READ_MASK (0x6 << 28)
++#define ENET_MIIDATA_OP_WRITE_MASK (0x5 << 28)
++
++/* Ethernet Interrupt Mask register */
++#define ENET_IRMASK_REG 0x18
++
++/* Ethernet Interrupt register */
++#define ENET_IR_REG 0x1c
++#define ENET_IR_MII (1 << 0)
++#define ENET_IR_MIB (1 << 1)
++#define ENET_IR_FLOWC (1 << 2)
++
++/* Ethernet Control register */
++#define ENET_CTL_REG 0x2c
++#define ENET_CTL_ENABLE_SHIFT 0
++#define ENET_CTL_ENABLE_MASK (1 << ENET_CTL_ENABLE_SHIFT)
++#define ENET_CTL_DISABLE_SHIFT 1
++#define ENET_CTL_DISABLE_MASK (1 << ENET_CTL_DISABLE_SHIFT)
++#define ENET_CTL_SRESET_SHIFT 2
++#define ENET_CTL_SRESET_MASK (1 << ENET_CTL_SRESET_SHIFT)
++#define ENET_CTL_EPHYSEL_SHIFT 3
++#define ENET_CTL_EPHYSEL_MASK (1 << ENET_CTL_EPHYSEL_SHIFT)
++
++/* Transmit Control register */
++#define ENET_TXCTL_REG 0x30
++#define ENET_TXCTL_FD_SHIFT 0
++#define ENET_TXCTL_FD_MASK (1 << ENET_TXCTL_FD_SHIFT)
++
++/* Transmit Watermask register */
++#define ENET_TXWMARK_REG 0x34
++#define ENET_TXWMARK_WM_SHIFT 0
++#define ENET_TXWMARK_WM_MASK (0x3f << ENET_TXWMARK_WM_SHIFT)
++
++/* MIB Control register */
++#define ENET_MIBCTL_REG 0x38
++#define ENET_MIBCTL_RDCLEAR_SHIFT 0
++#define ENET_MIBCTL_RDCLEAR_MASK (1 << ENET_MIBCTL_RDCLEAR_SHIFT)
++
++/* Perfect Match Data Low register */
++#define ENET_PML_REG(x) (0x58 + (x) * 8)
++#define ENET_PMH_REG(x) (0x5c + (x) * 8)
++#define ENET_PMH_DATAVALID_SHIFT 16
++#define ENET_PMH_DATAVALID_MASK (1 << ENET_PMH_DATAVALID_SHIFT)
++
++/* MIB register */
++#define ENET_MIB_REG(x) (0x200 + (x) * 4)
++#define ENET_MIB_REG_COUNT 55
++
++
++/*************************************************************************
++ * _REG relative to RSET_ENETDMA
++ *************************************************************************/
++
++/* Controller Configuration Register */
++#define ENETDMA_CFG_REG (0x0)
++#define ENETDMA_CFG_EN_SHIFT 0
++#define ENETDMA_CFG_EN_MASK (1 << ENETDMA_CFG_EN_SHIFT)
++#define ENETDMA_CFG_FLOWCH_MASK(x) (1 << ((x >> 1) + 1))
++
++/* Flow Control Descriptor Low Threshold register */
++#define ENETDMA_FLOWCL_REG(x) (0x4 + (x) * 6)
++
++/* Flow Control Descriptor High Threshold register */
++#define ENETDMA_FLOWCH_REG(x) (0x8 + (x) * 6)
++
++/* Flow Control Descriptor Buffer Alloca Threshold register */
++#define ENETDMA_BUFALLOC_REG(x) (0xc + (x) * 6)
++#define ENETDMA_BUFALLOC_FORCE_SHIFT 31
++#define ENETDMA_BUFALLOC_FORCE_MASK (1 << ENETDMA_BUFALLOC_FORCE_SHIFT)
++
++/* Channel Configuration register */
++#define ENETDMA_CHANCFG_REG(x) (0x100 + (x) * 0x10)
++#define ENETDMA_CHANCFG_EN_SHIFT 0
++#define ENETDMA_CHANCFG_EN_MASK (1 << ENETDMA_CHANCFG_EN_SHIFT)
++#define ENETDMA_CHANCFG_PKTHALT_SHIFT 1
++#define ENETDMA_CHANCFG_PKTHALT_MASK (1 << ENETDMA_CHANCFG_PKTHALT_SHIFT)
++
++/* Interrupt Control/Status register */
++#define ENETDMA_IR_REG(x) (0x104 + (x) * 0x10)
++#define ENETDMA_IR_BUFDONE_MASK (1 << 0)
++#define ENETDMA_IR_PKTDONE_MASK (1 << 1)
++#define ENETDMA_IR_NOTOWNER_MASK (1 << 2)
++
++/* Interrupt Mask register */
++#define ENETDMA_IRMASK_REG(x) (0x108 + (x) * 0x10)
++
++/* Maximum Burst Length */
++#define ENETDMA_MAXBURST_REG(x) (0x10C + (x) * 0x10)
++
++/* Ring Start Address register */
++#define ENETDMA_RSTART_REG(x) (0x200 + (x) * 0x10)
++
++/* State Ram Word 2 */
++#define ENETDMA_SRAM2_REG(x) (0x204 + (x) * 0x10)
++
++/* State Ram Word 3 */
++#define ENETDMA_SRAM3_REG(x) (0x208 + (x) * 0x10)
++
++/* State Ram Word 4 */
++#define ENETDMA_SRAM4_REG(x) (0x20c + (x) * 0x10)
++
++
++/*************************************************************************
++ * _REG relative to RSET_OHCI_PRIV
++ *************************************************************************/
++
++#define OHCI_PRIV_REG 0x0
++#define OHCI_PRIV_PORT1_HOST_SHIFT 0
++#define OHCI_PRIV_PORT1_HOST_MASK (1 << OHCI_PRIV_PORT1_HOST_SHIFT)
++#define OHCI_PRIV_REG_SWAP_SHIFT 3
++#define OHCI_PRIV_REG_SWAP_MASK (1 << OHCI_PRIV_REG_SWAP_SHIFT)
++
++
++/*************************************************************************
++ * _REG relative to RSET_USBH_PRIV
++ *************************************************************************/
++
++#define USBH_PRIV_SWAP_REG 0x0
++#define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT 4
++#define USBH_PRIV_SWAP_EHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT)
++#define USBH_PRIV_SWAP_EHCI_DATA_SHIFT 3
++#define USBH_PRIV_SWAP_EHCI_DATA_MASK (1 << USBH_PRIV_SWAP_EHCI_DATA_SHIFT)
++#define USBH_PRIV_SWAP_OHCI_ENDN_SHIFT 1
++#define USBH_PRIV_SWAP_OHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_OHCI_ENDN_SHIFT)
++#define USBH_PRIV_SWAP_OHCI_DATA_SHIFT 0
++#define USBH_PRIV_SWAP_OHCI_DATA_MASK (1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT)
++
++#define USBH_PRIV_TEST_REG 0x24
++
++
++/*************************************************************************
++ * _REG relative to RSET_MPI
++ *************************************************************************/
++
++/* well known (hard wired) chip select */
++#define MPI_CS_PCMCIA_COMMON 4
++#define MPI_CS_PCMCIA_ATTR 5
++#define MPI_CS_PCMCIA_IO 6
++
++/* Chip select base register */
++#define MPI_CSBASE_REG(x) (0x0 + (x) * 8)
++#define MPI_CSBASE_BASE_SHIFT 13
++#define MPI_CSBASE_BASE_MASK (0x1ffff << MPI_CSBASE_BASE_SHIFT)
++#define MPI_CSBASE_SIZE_SHIFT 0
++#define MPI_CSBASE_SIZE_MASK (0xf << MPI_CSBASE_SIZE_SHIFT)
++
++#define MPI_CSBASE_SIZE_8K 0
++#define MPI_CSBASE_SIZE_16K 1
++#define MPI_CSBASE_SIZE_32K 2
++#define MPI_CSBASE_SIZE_64K 3
++#define MPI_CSBASE_SIZE_128K 4
++#define MPI_CSBASE_SIZE_256K 5
++#define MPI_CSBASE_SIZE_512K 6
++#define MPI_CSBASE_SIZE_1M 7
++#define MPI_CSBASE_SIZE_2M 8
++#define MPI_CSBASE_SIZE_4M 9
++#define MPI_CSBASE_SIZE_8M 10
++#define MPI_CSBASE_SIZE_16M 11
++#define MPI_CSBASE_SIZE_32M 12
++#define MPI_CSBASE_SIZE_64M 13
++#define MPI_CSBASE_SIZE_128M 14
++#define MPI_CSBASE_SIZE_256M 15
++
++/* Chip select control register */
++#define MPI_CSCTL_REG(x) (0x4 + (x) * 8)
++#define MPI_CSCTL_ENABLE_MASK (1 << 0)
++#define MPI_CSCTL_WAIT_SHIFT 1
++#define MPI_CSCTL_WAIT_MASK (0x7 << MPI_CSCTL_WAIT_SHIFT)
++#define MPI_CSCTL_DATA16_MASK (1 << 4)
++#define MPI_CSCTL_SYNCMODE_MASK (1 << 7)
++#define MPI_CSCTL_TSIZE_MASK (1 << 8)
++#define MPI_CSCTL_ENDIANSWAP_MASK (1 << 10)
++#define MPI_CSCTL_SETUP_SHIFT 16
++#define MPI_CSCTL_SETUP_MASK (0xf << MPI_CSCTL_SETUP_SHIFT)
++#define MPI_CSCTL_HOLD_SHIFT 20
++#define MPI_CSCTL_HOLD_MASK (0xf << MPI_CSCTL_HOLD_SHIFT)
++
++/* PCI registers */
++#define MPI_SP0_RANGE_REG 0x100
++#define MPI_SP0_REMAP_REG 0x104
++#define MPI_SP0_REMAP_ENABLE_MASK (1 << 0)
++#define MPI_SP1_RANGE_REG 0x10C
++#define MPI_SP1_REMAP_REG 0x110
++#define MPI_SP1_REMAP_ENABLE_MASK (1 << 0)
++
++#define MPI_L2PCFG_REG 0x11C
++#define MPI_L2PCFG_CFG_TYPE_SHIFT 0
++#define MPI_L2PCFG_CFG_TYPE_MASK (0x3 << MPI_L2PCFG_CFG_TYPE_SHIFT)
++#define MPI_L2PCFG_REG_SHIFT 2
++#define MPI_L2PCFG_REG_MASK (0x3f << MPI_L2PCFG_REG_SHIFT)
++#define MPI_L2PCFG_FUNC_SHIFT 8
++#define MPI_L2PCFG_FUNC_MASK (0x7 << MPI_L2PCFG_FUNC_SHIFT)
++#define MPI_L2PCFG_DEVNUM_SHIFT 11
++#define MPI_L2PCFG_DEVNUM_MASK (0x1f << MPI_L2PCFG_DEVNUM_SHIFT)
++#define MPI_L2PCFG_CFG_USEREG_MASK (1 << 30)
++#define MPI_L2PCFG_CFG_SEL_MASK (1 << 31)
++
++#define MPI_L2PMEMRANGE1_REG 0x120
++#define MPI_L2PMEMBASE1_REG 0x124
++#define MPI_L2PMEMREMAP1_REG 0x128
++#define MPI_L2PMEMRANGE2_REG 0x12C
++#define MPI_L2PMEMBASE2_REG 0x130
++#define MPI_L2PMEMREMAP2_REG 0x134
++#define MPI_L2PIORANGE_REG 0x138
++#define MPI_L2PIOBASE_REG 0x13C
++#define MPI_L2PIOREMAP_REG 0x140
++#define MPI_L2P_BASE_MASK (0xffff8000)
++#define MPI_L2PREMAP_ENABLED_MASK (1 << 0)
++#define MPI_L2PREMAP_IS_CARDBUS_MASK (1 << 2)
++
++#define MPI_PCIMODESEL_REG 0x144
++#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK (1 << 0)
++#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK (1 << 1)
++#define MPI_PCIMODESEL_EXT_ARB_MASK (1 << 2)
++#define MPI_PCIMODESEL_PREFETCH_SHIFT 4
++#define MPI_PCIMODESEL_PREFETCH_MASK (0xf << MPI_PCIMODESEL_PREFETCH_SHIFT)
++
++#define MPI_LOCBUSCTL_REG 0x14C
++#define MPI_LOCBUSCTL_EN_PCI_GPIO_MASK (1 << 0)
++#define MPI_LOCBUSCTL_U2P_NOSWAP_MASK (1 << 1)
++
++#define MPI_LOCINT_REG 0x150
++#define MPI_LOCINT_MASK(x) (1 << (x + 16))
++#define MPI_LOCINT_STAT(x) (1 << (x))
++#define MPI_LOCINT_DIR_FAILED 6
++#define MPI_LOCINT_EXT_PCI_INT 7
++#define MPI_LOCINT_SERR 8
++#define MPI_LOCINT_CSERR 9
++
++#define MPI_PCICFGCTL_REG 0x178
++#define MPI_PCICFGCTL_CFGADDR_SHIFT 2
++#define MPI_PCICFGCTL_CFGADDR_MASK (0x1f << MPI_PCICFGCTL_CFGADDR_SHIFT)
++#define MPI_PCICFGCTL_WRITEEN_MASK (1 << 7)
++
++#define MPI_PCICFGDATA_REG 0x17C
++
++/* PCI host bridge custom register */
++#define BCMPCI_REG_TIMERS 0x40
++#define REG_TIMER_TRDY_SHIFT 0
++#define REG_TIMER_TRDY_MASK (0xff << REG_TIMER_TRDY_SHIFT)
++#define REG_TIMER_RETRY_SHIFT 8
++#define REG_TIMER_RETRY_MASK (0xff << REG_TIMER_RETRY_SHIFT)
++
++
++/*************************************************************************
++ * _REG relative to RSET_PCMCIA
++ *************************************************************************/
++
++#define PCMCIA_C1_REG 0x0
++#define PCMCIA_C1_CD1_MASK (1 << 0)
++#define PCMCIA_C1_CD2_MASK (1 << 1)
++#define PCMCIA_C1_VS1_MASK (1 << 2)
++#define PCMCIA_C1_VS2_MASK (1 << 3)
++#define PCMCIA_C1_VS1OE_MASK (1 << 6)
++#define PCMCIA_C1_VS2OE_MASK (1 << 7)
++#define PCMCIA_C1_CBIDSEL_SHIFT (8)
++#define PCMCIA_C1_CBIDSEL_MASK (0x1f << PCMCIA_C1_CBIDSEL_SHIFT)
++#define PCMCIA_C1_EN_PCMCIA_GPIO_MASK (1 << 13)
++#define PCMCIA_C1_EN_PCMCIA_MASK (1 << 14)
++#define PCMCIA_C1_EN_CARDBUS_MASK (1 << 15)
++#define PCMCIA_C1_RESET_MASK (1 << 18)
++
++#define PCMCIA_C2_REG 0x8
++#define PCMCIA_C2_DATA16_MASK (1 << 0)
++#define PCMCIA_C2_BYTESWAP_MASK (1 << 1)
++#define PCMCIA_C2_RWCOUNT_SHIFT 2
++#define PCMCIA_C2_RWCOUNT_MASK (0x3f << PCMCIA_C2_RWCOUNT_SHIFT)
++#define PCMCIA_C2_INACTIVE_SHIFT 8
++#define PCMCIA_C2_INACTIVE_MASK (0x3f << PCMCIA_C2_INACTIVE_SHIFT)
++#define PCMCIA_C2_SETUP_SHIFT 16
++#define PCMCIA_C2_SETUP_MASK (0x3f << PCMCIA_C2_SETUP_SHIFT)
++#define PCMCIA_C2_HOLD_SHIFT 24
++#define PCMCIA_C2_HOLD_MASK (0x3f << PCMCIA_C2_HOLD_SHIFT)
++
++
++/*************************************************************************
++ * _REG relative to RSET_SDRAM
++ *************************************************************************/
++
++#define SDRAM_CFG_REG 0x0
++#define SDRAM_CFG_ROW_SHIFT 4
++#define SDRAM_CFG_ROW_MASK (0x3 << SDRAM_CFG_ROW_SHIFT)
++#define SDRAM_CFG_COL_SHIFT 6
++#define SDRAM_CFG_COL_MASK (0x3 << SDRAM_CFG_COL_SHIFT)
++#define SDRAM_CFG_32B_SHIFT 10
++#define SDRAM_CFG_32B_MASK (1 << SDRAM_CFG_32B_SHIFT)
++#define SDRAM_CFG_BANK_SHIFT 13
++#define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT)
++
++#define SDRAM_PRIO_REG 0x2C
++#define SDRAM_PRIO_MIPS_SHIFT 29
++#define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT)
++#define SDRAM_PRIO_ADSL_SHIFT 30
++#define SDRAM_PRIO_ADSL_MASK (1 << SDRAM_PRIO_ADSL_SHIFT)
++#define SDRAM_PRIO_EN_SHIFT 31
++#define SDRAM_PRIO_EN_MASK (1 << SDRAM_PRIO_EN_SHIFT)
++
++
++/*************************************************************************
++ * _REG relative to RSET_MEMC
++ *************************************************************************/
++
++#define MEMC_CFG_REG 0x4
++#define MEMC_CFG_32B_SHIFT 1
++#define MEMC_CFG_32B_MASK (1 << MEMC_CFG_32B_SHIFT)
++#define MEMC_CFG_COL_SHIFT 3
++#define MEMC_CFG_COL_MASK (0x3 << MEMC_CFG_COL_SHIFT)
++#define MEMC_CFG_ROW_SHIFT 6
++#define MEMC_CFG_ROW_MASK (0x3 << MEMC_CFG_ROW_SHIFT)
++
++
++/*************************************************************************
++ * _REG relative to RSET_DDR
++ *************************************************************************/
++
++#define DDR_DMIPSPLLCFG_REG 0x18
++#define DMIPSPLLCFG_M1_SHIFT 0
++#define DMIPSPLLCFG_M1_MASK (0xff << DMIPSPLLCFG_M1_SHIFT)
++#define DMIPSPLLCFG_N1_SHIFT 23
++#define DMIPSPLLCFG_N1_MASK (0x3f << DMIPSPLLCFG_N1_SHIFT)
++#define DMIPSPLLCFG_N2_SHIFT 29
++#define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT)
++
++#endif /* BCM63XX_REGS_H_ */
++
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_timer.h b/include/asm-mips/mach-bcm63xx/bcm63xx_timer.h
+new file mode 100644
+index 0000000..c0fce83
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_timer.h
+@@ -0,0 +1,11 @@
++#ifndef BCM63XX_TIMER_H_
++#define BCM63XX_TIMER_H_
++
++int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data);
++void bcm63xx_timer_unregister(int id);
++int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us);
++int bcm63xx_timer_enable(int id);
++int bcm63xx_timer_disable(int id);
++unsigned int bcm63xx_timer_countdown(unsigned int countdown_us);
++
++#endif /* !BCM63XX_TIMER_H_ */
+diff --git a/include/asm-mips/mach-bcm63xx/cpu-feature-overrides.h b/include/asm-mips/mach-bcm63xx/cpu-feature-overrides.h
+new file mode 100644
+index 0000000..1a5c4b1
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/cpu-feature-overrides.h
+@@ -0,0 +1,51 @@
++#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
++
++#include <bcm63xx_cpu.h>
++
++#define cpu_has_tlb 1
++#define cpu_has_4kex 1
++#define cpu_has_4k_cache 1
++#define cpu_has_fpu 0
++#define cpu_has_32fpr 0
++#define cpu_has_counter 1
++#define cpu_has_watch 0
++#define cpu_has_divec 1
++#define cpu_has_vce 0
++#define cpu_has_cache_cdex_p 0
++#define cpu_has_cache_cdex_s 0
++#define cpu_has_prefetch 1
++#define cpu_has_mcheck 1
++#define cpu_has_ejtag 1
++#define cpu_has_llsc 1
++#define cpu_has_mips16 0
++#define cpu_has_mdmx 0
++#define cpu_has_mips3d 0
++#define cpu_has_smartmips 0
++#define cpu_has_vtag_icache 0
++
++#if !defined(BCMCPU_RUNTIME_DETECT) && defined(CONFIG_BCMCPU_IS_6348)
++#define cpu_has_dc_aliases 0
++#endif
++
++#define cpu_has_ic_fills_f_dc 0
++#define cpu_has_pindexed_dcache 0
++
++#define cpu_has_mips32r1 1
++#define cpu_has_mips32r2 0
++#define cpu_has_mips64r1 0
++#define cpu_has_mips64r2 0
++
++#define cpu_has_dsp 0
++#define cpu_has_mipsmt 0
++#define cpu_has_userlocal 0
++
++#define cpu_has_nofpuex 0
++#define cpu_has_64bits 0
++#define cpu_has_64bit_zero_reg 0
++
++#define cpu_dcache_line_size() 16
++#define cpu_icache_line_size() 16
++#define cpu_scache_line_size() 0
++
++#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
+diff --git a/include/asm-mips/mach-bcm63xx/gpio.h b/include/asm-mips/mach-bcm63xx/gpio.h
+new file mode 100644
+index 0000000..dd2c0f3
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/gpio.h
+@@ -0,0 +1,52 @@
++#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H
++#define __ASM_MIPS_MACH_BCM63XX_GPIO_H
++
++#include <bcm63xx_gpio.h>
++
++static inline int gpio_is_valid(int number)
++{
++ return (number >= BCM63XX_GPIO_COUNT) ? 0 : 1;
++}
++
++static inline int gpio_request(unsigned gpio, const char *label)
++{
++ return 0;
++}
++
++static inline void gpio_free(unsigned gpio)
++{
++}
++
++static inline int gpio_direction_input(unsigned gpio)
++{
++ bcm63xx_gpio_set_direction(gpio, GPIO_DIR_IN);
++ return 0;
++}
++
++static inline int gpio_direction_output(unsigned gpio, int value)
++{
++ bcm63xx_gpio_set_direction(gpio, GPIO_DIR_OUT);
++ return 0;
++}
++
++static inline int gpio_get_value(unsigned gpio)
++{
++ return bcm63xx_gpio_get_datain(gpio);
++}
++
++static inline void gpio_set_value(unsigned gpio, int value)
++{
++ bcm63xx_gpio_set_dataout(gpio, value);
++}
++
++static inline int gpio_to_irq(unsigned gpio)
++{
++ return gpio;
++}
++
++static inline int irq_to_gpio(unsigned irq)
++{
++ return irq;
++}
++
++#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */
+diff --git a/include/asm-mips/mach-bcm63xx/war.h b/include/asm-mips/mach-bcm63xx/war.h
+new file mode 100644
+index 0000000..8e3f3fd
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/war.h
+@@ -0,0 +1,25 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
++ */
++#ifndef __ASM_MIPS_MACH_BCM63XX_WAR_H
++#define __ASM_MIPS_MACH_BCM63XX_WAR_H
++
++#define R4600_V1_INDEX_ICACHEOP_WAR 0
++#define R4600_V1_HIT_CACHEOP_WAR 0
++#define R4600_V2_HIT_CACHEOP_WAR 0
++#define R5432_CP0_INTERRUPT_WAR 0
++#define BCM1250_M3_WAR 0
++#define SIBYTE_1956_WAR 0
++#define MIPS4K_ICACHE_REFILL_WAR 0
++#define MIPS_CACHE_SYNC_WAR 0
++#define TX49XX_ICACHE_INDEX_INV_WAR 0
++#define RM9000_CDEX_SMP_WAR 0
++#define ICACHE_REFILLS_WORKAROUND_WAR 0
++#define R10000_LLSC_WAR 0
++#define MIPS34K_MISSED_ITLB_WAR 0
++
++#endif /* __ASM_MIPS_MACH_BCM63XX_WAR_H */
+--
+1.5.4.3
+
--- /dev/null
+From 6c489656b09998ed6a6f857e01ccf630e29358dd Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 18 Jul 2008 19:35:55 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add serial driver for bcm63xx integrated UART.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-uart.c | 41 +
+ drivers/serial/Kconfig | 19 +
+ drivers/serial/Makefile | 1 +
+ drivers/serial/bcm63xx_uart.c | 890 ++++++++++++++++++++++
+ include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h | 6 +
+ include/linux/serial_core.h | 2 +
+ 7 files changed, 960 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-uart.c
+ create mode 100644 drivers/serial/bcm63xx_uart.c
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h
+
+diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
+index 4fc0a1c..8f3299e 100644
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,2 +1,3 @@
+ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o
++obj-y += dev-uart.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c
+new file mode 100644
+index 0000000..5f3d89c
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-uart.c
+@@ -0,0 +1,41 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_uart.h>
++
++static struct resource uart_resources[] = {
++ {
++ .start = -1, /* filled at runtime */
++ .end = -1, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device bcm63xx_uart_device = {
++ .name = "bcm63xx_uart",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(uart_resources),
++ .resource = uart_resources,
++};
++
++int __init bcm63xx_uart_register(void)
++{
++ uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
++ uart_resources[0].end = uart_resources[0].start;
++ uart_resources[0].end += RSET_UART_SIZE - 1;
++ uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
++ return platform_device_register(&bcm63xx_uart_device);
++}
+diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
+index 77cb342..52b31a4 100644
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1421,4 +1421,23 @@ config SPORT_BAUD_RATE
+ default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
+ default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+
++config SERIAL_BCM63XX
++ tristate "bcm63xx serial port support"
++ select SERIAL_CORE
++ depends on BCM63XX
++ help
++ If you have a bcm63xx CPU, you can enable its onboard
++ serial port by enabling this options.
++
++ To compile this driver as a module, choose M here: the
++ module will be called bcm963xx_uart.
++
++config SERIAL_BCM63XX_CONSOLE
++ bool "Console on bcm63xx serial port"
++ depends on SERIAL_BCM63XX
++ select SERIAL_CORE_CONSOLE
++ help
++ If you have enabled the serial port on the bcm63xx CPU
++ you can make it the console by answering Y to this option.
++
+ endmenu
+diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
+index 7e7383e..84f6cfc 100644
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+ obj-$(CONFIG_SERIAL_PXA) += pxa.o
+ obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
+ obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
++obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
+ obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
+ obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
+ obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
+diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
+new file mode 100644
+index 0000000..606f4d6
+--- /dev/null
++++ b/drivers/serial/bcm63xx_uart.c
+@@ -0,0 +1,890 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Derived from many drivers using generic_serial interface.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ *
++ * Serial driver for BCM63xx integrated UART.
++ *
++ * Hardware flow control was _not_ tested since I only have RX/TX on
++ * my board.
++ */
++
++#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/module.h>
++#include <linux/console.h>
++#include <linux/clk.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/sysrq.h>
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++
++#include <bcm63xx_clk.h>
++#include <bcm63xx_irq.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++
++#define BCM63XX_NR_UARTS 1
++
++static struct uart_port ports[BCM63XX_NR_UARTS];
++
++/*
++ * rx interrupt mask / stat
++ *
++ * mask:
++ * - rx fifo full
++ * - rx fifo above threshold
++ * - rx fifo not empty for too long
++ */
++#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \
++ UART_IR_MASK(UART_IR_RXTHRESH) | \
++ UART_IR_MASK(UART_IR_RXTIMEOUT))
++
++#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \
++ UART_IR_STAT(UART_IR_RXTHRESH) | \
++ UART_IR_STAT(UART_IR_RXTIMEOUT))
++
++/*
++ * tx interrupt mask / stat
++ *
++ * mask:
++ * - tx fifo empty
++ * - tx fifo below threshold
++ */
++#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \
++ UART_IR_MASK(UART_IR_TXTRESH))
++
++#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \
++ UART_IR_STAT(UART_IR_TXTRESH))
++
++/*
++ * external input interrupt
++ *
++ * mask: any edge on CTS, DCD
++ */
++#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
++ UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
++
++/*
++ * handy uart register accessor
++ */
++static inline unsigned int bcm_uart_readl(struct uart_port *port,
++ unsigned int offset)
++{
++ return bcm_readl(port->membase + offset);
++}
++
++static inline void bcm_uart_writel(struct uart_port *port,
++ unsigned int value, unsigned int offset)
++{
++ bcm_writel(value, port->membase + offset);
++}
++
++/*
++ * serial core request to check if uart tx fifo is empty
++ */
++static unsigned int bcm_uart_tx_empty(struct uart_port *port)
++{
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_IR_REG);
++ return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
++}
++
++/*
++ * serial core request to set RTS and DTR pin state and loopback mode
++ */
++static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
++{
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_MCTL_REG);
++ val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
++ /* invert of written value is reflected on the pin */
++ if (!(mctrl & TIOCM_DTR))
++ val |= UART_MCTL_DTR_MASK;
++ if (!(mctrl & TIOCM_RTS))
++ val |= UART_MCTL_RTS_MASK;
++ bcm_uart_writel(port, val, UART_MCTL_REG);
++
++ val = bcm_uart_readl(port, UART_CTL_REG);
++ if (mctrl & TIOCM_LOOP)
++ val |= UART_CTL_LOOPBACK_MASK;
++ else
++ val &= ~UART_CTL_LOOPBACK_MASK;
++ bcm_uart_writel(port, val, UART_CTL_REG);
++}
++
++/*
++ * serial core request to return RI, CTS, DCD and DSR pin state
++ */
++static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
++{
++ unsigned int val, mctrl;
++
++ mctrl = 0;
++ val = bcm_uart_readl(port, UART_EXTINP_REG);
++ if (val & UART_EXTINP_RI_MASK)
++ mctrl |= TIOCM_RI;
++ if (val & UART_EXTINP_CTS_MASK)
++ mctrl |= TIOCM_CTS;
++ if (val & UART_EXTINP_DCD_MASK)
++ mctrl |= TIOCM_CD;
++ if (val & UART_EXTINP_DSR_MASK)
++ mctrl |= TIOCM_DSR;
++ return mctrl;
++}
++
++/*
++ * serial core request to disable tx ASAP (used for flow control)
++ */
++static void bcm_uart_stop_tx(struct uart_port *port)
++{
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_CTL_REG);
++ val &= ~(UART_CTL_TXEN_MASK);
++ bcm_uart_writel(port, val, UART_CTL_REG);
++
++ val = bcm_uart_readl(port, UART_IR_REG);
++ val &= ~UART_TX_INT_MASK;
++ bcm_uart_writel(port, val, UART_IR_REG);
++}
++
++/*
++ * serial core request to (re)enable tx
++ */
++static void bcm_uart_start_tx(struct uart_port *port)
++{
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_IR_REG);
++ val |= UART_TX_INT_MASK;
++ bcm_uart_writel(port, val, UART_IR_REG);
++
++ val = bcm_uart_readl(port, UART_CTL_REG);
++ val |= UART_CTL_TXEN_MASK;
++ bcm_uart_writel(port, val, UART_CTL_REG);
++}
++
++/*
++ * serial core request to stop rx, called before port shutdown
++ */
++static void bcm_uart_stop_rx(struct uart_port *port)
++{
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_IR_REG);
++ val &= ~UART_RX_INT_MASK;
++ bcm_uart_writel(port, val, UART_IR_REG);
++}
++
++/*
++ * serial core request to enable modem status interrupt reporting
++ */
++static void bcm_uart_enable_ms(struct uart_port *port)
++{
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_IR_REG);
++ val |= UART_IR_MASK(UART_IR_EXTIP);
++ bcm_uart_writel(port, val, UART_IR_REG);
++}
++
++/*
++ * serial core request to start/stop emitting break char
++ */
++static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
++{
++ unsigned long flags;
++ unsigned int val;
++
++ spin_lock_irqsave(&port->lock, flags);
++
++ val = bcm_uart_readl(port, UART_CTL_REG);
++ if (ctl)
++ val |= UART_CTL_XMITBRK_MASK;
++ else
++ val &= ~UART_CTL_XMITBRK_MASK;
++ bcm_uart_writel(port, val, UART_CTL_REG);
++
++ spin_unlock_irqrestore(&port->lock, flags);
++}
++
++/*
++ * return port type in string format
++ */
++static const char *bcm_uart_type(struct uart_port *port)
++{
++ return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
++}
++
++/*
++ * read all chars in rx fifo and send them to core
++ */
++static void bcm_uart_do_rx(struct uart_port *port)
++{
++ struct tty_struct *tty;
++ unsigned int max_count;
++
++ /* limit number of char read in interrupt, should not be
++ * higher than fifo size anyway since we're much faster than
++ * serial port */
++ max_count = 32;
++ tty = port->info->port.tty;
++ do {
++ unsigned int iestat, c, cstat;
++ char flag;
++
++ /* get overrun/fifo empty information from ier
++ * register */
++ iestat = bcm_uart_readl(port, UART_IR_REG);
++ if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
++ break;
++
++ cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
++ port->icount.rx++;
++ flag = TTY_NORMAL;
++ c &= 0xff;
++
++ if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
++ /* do stats first */
++ if (cstat & UART_FIFO_BRKDET_MASK) {
++ port->icount.brk++;
++ if (uart_handle_break(port))
++ continue;
++ }
++
++ if (cstat & UART_FIFO_PARERR_MASK)
++ port->icount.parity++;
++ if (cstat & UART_FIFO_FRAMEERR_MASK)
++ port->icount.frame++;
++
++ /* update flag wrt read_status_mask */
++ cstat &= port->read_status_mask;
++ if (cstat & UART_FIFO_BRKDET_MASK)
++ flag = TTY_BREAK;
++ if (cstat & UART_FIFO_FRAMEERR_MASK)
++ flag = TTY_FRAME;
++ if (cstat & UART_FIFO_PARERR_MASK)
++ flag = TTY_PARITY;
++ }
++
++ if (uart_handle_sysrq_char(port, c))
++ continue;
++
++ if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
++ port->icount.overrun++;
++ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
++ }
++
++ if ((cstat & port->ignore_status_mask) == 0)
++ tty_insert_flip_char(tty, c, flag);
++
++ } while (--max_count);
++
++ tty_flip_buffer_push(tty);
++}
++
++/*
++ * fill tx fifo with chars to send, stop when fifo is about to be full
++ * or when all chars have been sent.
++ */
++static void bcm_uart_do_tx(struct uart_port *port)
++{
++ struct circ_buf *xmit;
++ unsigned int val, max_count;
++
++ if (port->x_char) {
++ bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
++ port->icount.tx++;
++ port->x_char = 0;
++ return;
++ }
++
++ if (uart_tx_stopped(port)) {
++ bcm_uart_stop_tx(port);
++ return;
++ }
++
++ xmit = &port->info->xmit;
++ if (uart_circ_empty(xmit))
++ goto txq_empty;
++
++ val = bcm_uart_readl(port, UART_MCTL_REG);
++ val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
++ max_count = port->fifosize - val;
++
++ while (max_count--) {
++ unsigned int c;
++
++ c = xmit->buf[xmit->tail];
++ bcm_uart_writel(port, c, UART_FIFO_REG);
++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++ port->icount.tx++;
++ if (uart_circ_empty(xmit))
++ break;
++ }
++
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(port);
++
++ if (uart_circ_empty(xmit))
++ goto txq_empty;
++ return;
++
++txq_empty:
++ /* nothing to send, disable transmit interrupt */
++ val = bcm_uart_readl(port, UART_IR_REG);
++ val &= ~UART_TX_INT_MASK;
++ bcm_uart_writel(port, val, UART_IR_REG);
++ return;
++}
++
++/*
++ * process uart interrupt
++ */
++static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
++{
++ struct uart_port *port;
++ unsigned int irqstat;
++
++ port = dev_id;
++ spin_lock(&port->lock);
++
++ irqstat = bcm_uart_readl(port, UART_IR_REG);
++ if (irqstat & UART_RX_INT_STAT)
++ bcm_uart_do_rx(port);
++
++ if (irqstat & UART_TX_INT_STAT)
++ bcm_uart_do_tx(port);
++
++ if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
++ unsigned int estat;
++
++ estat = bcm_uart_readl(port, UART_EXTINP_REG);
++ if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
++ uart_handle_cts_change(port,
++ estat & UART_EXTINP_CTS_MASK);
++ if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
++ uart_handle_dcd_change(port,
++ estat & UART_EXTINP_DCD_MASK);
++ }
++
++ spin_unlock(&port->lock);
++ return IRQ_HANDLED;
++}
++
++/*
++ * enable rx & tx operation on uart
++ */
++static void bcm_uart_enable(struct uart_port *port)
++{
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_CTL_REG);
++ val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
++ bcm_uart_writel(port, val, UART_CTL_REG);
++}
++
++/*
++ * disable rx & tx operation on uart
++ */
++static void bcm_uart_disable(struct uart_port *port)
++{
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_CTL_REG);
++ val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
++ UART_CTL_RXEN_MASK);
++ bcm_uart_writel(port, val, UART_CTL_REG);
++}
++
++/*
++ * clear all unread data in rx fifo and unsent data in tx fifo
++ */
++static void bcm_uart_flush(struct uart_port *port)
++{
++ unsigned int val;
++
++ /* empty rx and tx fifo */
++ val = bcm_uart_readl(port, UART_CTL_REG);
++ val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
++ bcm_uart_writel(port, val, UART_CTL_REG);
++
++ /* read any pending char to make sure all irq status are
++ * cleared */
++ (void)bcm_uart_readl(port, UART_FIFO_REG);
++}
++
++/*
++ * serial core request to initialize uart and start rx operation
++ */
++static int bcm_uart_startup(struct uart_port *port)
++{
++ unsigned int val;
++ int ret;
++
++ /* mask all irq and flush port */
++ bcm_uart_disable(port);
++ bcm_uart_writel(port, 0, UART_IR_REG);
++ bcm_uart_flush(port);
++
++ /* clear any pending external input interrupt */
++ (void)bcm_uart_readl(port, UART_EXTINP_REG);
++
++ /* set rx/tx fifo thresh to fifo half size */
++ val = bcm_uart_readl(port, UART_MCTL_REG);
++ val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
++ val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
++ val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
++ bcm_uart_writel(port, val, UART_MCTL_REG);
++
++ /* set rx fifo timeout to 1 char time */
++ val = bcm_uart_readl(port, UART_CTL_REG);
++ val &= ~UART_CTL_RXTMOUTCNT_MASK;
++ val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
++ bcm_uart_writel(port, val, UART_CTL_REG);
++
++ /* report any edge on dcd and cts */
++ val = UART_EXTINP_INT_MASK;
++ val |= UART_EXTINP_DCD_NOSENSE_MASK;
++ val |= UART_EXTINP_CTS_NOSENSE_MASK;
++ bcm_uart_writel(port, val, UART_EXTINP_REG);
++
++ /* register irq and enable rx interrupts */
++ ret = request_irq(port->irq, bcm_uart_interrupt, 0,
++ bcm_uart_type(port), port);
++ if (ret)
++ return ret;
++ bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
++ bcm_uart_enable(port);
++ return 0;
++}
++
++/*
++ * serial core request to flush & disable uart
++ */
++static void bcm_uart_shutdown(struct uart_port *port)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&port->lock, flags);
++ bcm_uart_writel(port, 0, UART_IR_REG);
++ spin_unlock_irqrestore(&port->lock, flags);
++
++ bcm_uart_disable(port);
++ bcm_uart_flush(port);
++ free_irq(port->irq, port);
++}
++
++/*
++ * serial core request to change current uart setting
++ */
++static void bcm_uart_set_termios(struct uart_port *port,
++ struct ktermios *new,
++ struct ktermios *old)
++{
++ unsigned int ctl, baud, quot, ier;
++ unsigned long flags;
++
++ spin_lock_irqsave(&port->lock, flags);
++
++ /* disable uart while changing speed */
++ bcm_uart_disable(port);
++ bcm_uart_flush(port);
++
++ /* update Control register */
++ ctl = bcm_uart_readl(port, UART_CTL_REG);
++ ctl &= ~UART_CTL_BITSPERSYM_MASK;
++
++ switch (new->c_cflag & CSIZE) {
++ case CS5:
++ ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
++ break;
++ case CS6:
++ ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
++ break;
++ case CS7:
++ ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
++ break;
++ default:
++ ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
++ break;
++ }
++
++ ctl &= ~UART_CTL_STOPBITS_MASK;
++ if (new->c_cflag & CSTOPB)
++ ctl |= UART_CTL_STOPBITS_2;
++ else
++ ctl |= UART_CTL_STOPBITS_1;
++
++ ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
++ if (new->c_cflag & PARENB)
++ ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
++ ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
++ if (new->c_cflag & PARODD)
++ ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
++ bcm_uart_writel(port, ctl, UART_CTL_REG);
++
++ /* update Baudword register */
++ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
++ quot = uart_get_divisor(port, baud) - 1;
++ bcm_uart_writel(port, quot, UART_BAUD_REG);
++
++ /* update Interrupt register */
++ ier = bcm_uart_readl(port, UART_IR_REG);
++
++ ier &= ~UART_IR_MASK(UART_IR_EXTIP);
++ if (UART_ENABLE_MS(port, new->c_cflag))
++ ier |= UART_IR_MASK(UART_IR_EXTIP);
++
++ bcm_uart_writel(port, ier, UART_IR_REG);
++
++ /* update read/ignore mask */
++ port->read_status_mask = UART_FIFO_VALID_MASK;
++ if (new->c_iflag & INPCK) {
++ port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
++ port->read_status_mask |= UART_FIFO_PARERR_MASK;
++ }
++ if (new->c_iflag & (BRKINT))
++ port->read_status_mask |= UART_FIFO_BRKDET_MASK;
++
++ port->ignore_status_mask = 0;
++ if (new->c_iflag & IGNPAR)
++ port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
++ if (new->c_iflag & IGNBRK)
++ port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
++ if (!(new->c_cflag & CREAD))
++ port->ignore_status_mask |= UART_FIFO_VALID_MASK;
++
++ uart_update_timeout(port, new->c_cflag, baud);
++ bcm_uart_enable(port);
++ spin_unlock_irqrestore(&port->lock, flags);
++}
++
++/*
++ * serial core request to claim uart iomem
++ */
++static int bcm_uart_request_port(struct uart_port *port)
++{
++ unsigned int size;
++
++ size = RSET_UART_SIZE;
++ if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
++ dev_err(port->dev, "Memory region busy\n");
++ return -EBUSY;
++ }
++
++ port->membase = ioremap(port->mapbase, size);
++ if (!port->membase) {
++ dev_err(port->dev, "Unable to map registers\n");
++ release_mem_region(port->mapbase, size);
++ return -EBUSY;
++ }
++ return 0;
++}
++
++/*
++ * serial core request to release uart iomem
++ */
++static void bcm_uart_release_port(struct uart_port *port)
++{
++ release_mem_region(port->mapbase, RSET_UART_SIZE);
++ iounmap(port->membase);
++}
++
++/*
++ * serial core request to do any port required autoconfiguration
++ */
++static void bcm_uart_config_port(struct uart_port *port, int flags)
++{
++ if (flags & UART_CONFIG_TYPE) {
++ if (bcm_uart_request_port(port))
++ return;
++ port->type = PORT_BCM63XX;
++ }
++}
++
++/*
++ * serial core request to check that port information in serinfo are
++ * suitable
++ */
++static int bcm_uart_verify_port(struct uart_port *port,
++ struct serial_struct *serinfo)
++{
++ if (port->type != PORT_BCM63XX)
++ return -EINVAL;
++ if (port->irq != serinfo->irq)
++ return -EINVAL;
++ if (port->iotype != serinfo->io_type)
++ return -EINVAL;
++ if (port->mapbase != (unsigned long)serinfo->iomem_base)
++ return -EINVAL;
++ return 0;
++}
++
++/* serial core callbacks */
++static struct uart_ops bcm_uart_ops = {
++ .tx_empty = bcm_uart_tx_empty,
++ .get_mctrl = bcm_uart_get_mctrl,
++ .set_mctrl = bcm_uart_set_mctrl,
++ .start_tx = bcm_uart_start_tx,
++ .stop_tx = bcm_uart_stop_tx,
++ .stop_rx = bcm_uart_stop_rx,
++ .enable_ms = bcm_uart_enable_ms,
++ .break_ctl = bcm_uart_break_ctl,
++ .startup = bcm_uart_startup,
++ .shutdown = bcm_uart_shutdown,
++ .set_termios = bcm_uart_set_termios,
++ .type = bcm_uart_type,
++ .release_port = bcm_uart_release_port,
++ .request_port = bcm_uart_request_port,
++ .config_port = bcm_uart_config_port,
++ .verify_port = bcm_uart_verify_port,
++};
++
++
++
++#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
++static inline void wait_for_xmitr(struct uart_port *port)
++{
++ unsigned int tmout;
++
++ /* Wait up to 10ms for the character(s) to be sent. */
++ tmout = 10000;
++ while (--tmout) {
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_IR_REG);
++ if (val & UART_IR_STAT(UART_IR_TXEMPTY))
++ break;
++ udelay(1);
++ }
++
++ /* Wait up to 1s for flow control if necessary */
++ if (port->flags & UPF_CONS_FLOW) {
++ tmout = 1000000;
++ while (--tmout) {
++ unsigned int val;
++
++ val = bcm_uart_readl(port, UART_EXTINP_REG);
++ if (val & UART_EXTINP_CTS_MASK)
++ break;
++ udelay(1);
++ }
++ }
++}
++
++/*
++ * output given char
++ */
++static void bcm_console_putchar(struct uart_port *port, int ch)
++{
++ wait_for_xmitr(port);
++ bcm_uart_writel(port, ch, UART_FIFO_REG);
++}
++
++/*
++ * console core request to output given string
++ */
++static void bcm_console_write(struct console *co, const char *s,
++ unsigned int count)
++{
++ struct uart_port *port;
++ unsigned long flags;
++ int locked;
++
++ port = &ports[co->index];
++
++ local_irq_save(flags);
++ if (port->sysrq) {
++ /* bcm_uart_interrupt() already took the lock */
++ locked = 0;
++ } else if (oops_in_progress) {
++ locked = spin_trylock(&port->lock);
++ } else {
++ spin_lock(&port->lock);
++ locked = 1;
++ }
++
++ /* call helper to deal with \r\n */
++ uart_console_write(port, s, count, bcm_console_putchar);
++
++ /* and wait for char to be transmitted */
++ wait_for_xmitr(port);
++
++ if (locked)
++ spin_unlock(&port->lock);
++ local_irq_restore(flags);
++}
++
++/*
++ * console core request to setup given console, find matching uart
++ * port and setup it.
++ */
++static int bcm_console_setup(struct console *co, char *options)
++{
++ struct uart_port *port;
++ int baud = 9600;
++ int bits = 8;
++ int parity = 'n';
++ int flow = 'n';
++
++ if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
++ return -EINVAL;
++ port = &ports[co->index];
++ if (!port->membase)
++ return -ENODEV;
++ if (options)
++ uart_parse_options(options, &baud, &parity, &bits, &flow);
++
++ return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++static struct uart_driver bcm_uart_driver;
++
++static struct console bcm63xx_console = {
++ .name = "ttyS",
++ .write = bcm_console_write,
++ .device = uart_console_device,
++ .setup = bcm_console_setup,
++ .flags = CON_PRINTBUFFER,
++ .index = -1,
++ .data = &bcm_uart_driver,
++};
++
++static int __init bcm63xx_console_init(void)
++{
++ register_console(&bcm63xx_console);
++ return 0;
++}
++
++console_initcall(bcm63xx_console_init);
++
++#define BCM63XX_CONSOLE &bcm63xx_console
++#else
++#define BCM63XX_CONSOLE NULL
++#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
++
++static struct uart_driver bcm_uart_driver = {
++ .owner = THIS_MODULE,
++ .driver_name = "bcm63xx_uart",
++ .dev_name = "ttyS",
++ .major = TTY_MAJOR,
++ .minor = 64,
++ .nr = 1,
++ .cons = BCM63XX_CONSOLE,
++};
++
++/*
++ * platform driver probe/remove callback
++ */
++static int __devinit bcm_uart_probe(struct platform_device *pdev)
++{
++ struct resource *res_mem, *res_irq;
++ struct uart_port *port;
++ struct clk *clk;
++ int ret;
++
++ if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
++ return -EINVAL;
++
++ if (ports[pdev->id].membase)
++ return -EBUSY;
++
++ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res_mem)
++ return -ENODEV;
++
++ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ if (!res_irq)
++ return -ENODEV;
++
++ clk = clk_get(&pdev->dev, "periph");
++ if (IS_ERR(clk))
++ return -ENODEV;
++
++ port = &ports[pdev->id];
++ memset(port, 0, sizeof(*port));
++ port->iotype = UPIO_MEM;
++ port->mapbase = res_mem->start;
++ port->irq = res_irq->start;
++ port->ops = &bcm_uart_ops;
++ port->flags = UPF_BOOT_AUTOCONF;
++ port->dev = &pdev->dev;
++ port->fifosize = 16;
++ port->uartclk = clk_get_rate(clk) / 2;
++ clk_put(clk);
++
++ ret = uart_add_one_port(&bcm_uart_driver, port);
++ if (ret) {
++ kfree(port);
++ return ret;
++ }
++ platform_set_drvdata(pdev, port);
++ return 0;
++}
++
++static int __devexit bcm_uart_remove(struct platform_device *pdev)
++{
++ struct uart_port *port;
++
++ port = platform_get_drvdata(pdev);
++ uart_remove_one_port(&bcm_uart_driver, port);
++ platform_set_drvdata(pdev, NULL);
++ /* mark port as free */
++ ports[pdev->id].membase = 0;
++ return 0;
++}
++
++/*
++ * platform driver stuff
++ */
++static struct platform_driver bcm_uart_platform_driver = {
++ .probe = bcm_uart_probe,
++ .remove = __devexit_p(bcm_uart_remove),
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "bcm63xx_uart",
++ },
++};
++
++static int __init bcm_uart_init(void)
++{
++ int ret;
++
++ ret = uart_register_driver(&bcm_uart_driver);
++ if (ret)
++ return ret;
++
++ ret = platform_driver_register(&bcm_uart_platform_driver);
++ if (ret)
++ uart_unregister_driver(&bcm_uart_driver);
++
++ return ret;
++}
++
++static void __exit bcm_uart_exit(void)
++{
++ platform_driver_unregister(&bcm_uart_platform_driver);
++ uart_unregister_driver(&bcm_uart_driver);
++}
++
++module_init(bcm_uart_init);
++module_exit(bcm_uart_exit);
++
++MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
++MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver");
++MODULE_LICENSE("GPL");
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h
+new file mode 100644
+index 0000000..bf348f5
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_UART_H_
++#define BCM63XX_DEV_UART_H_
++
++int bcm63xx_uart_register(void);
++
++#endif /* BCM63XX_DEV_UART_H_ */
+diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
+index 3b2f6c0..f49ddff 100644
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -155,6 +155,8 @@
+
+ #define PORT_SC26XX 82
+
++#define PORT_BCM63XX 83
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
+--
+1.5.4.3
+
--- /dev/null
+From 2a7fa2dbbf68650644f807a50cc2d84ca30835c1 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Sun, 21 Sep 2008 04:47:13 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add PCI support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig | 2 +
+ arch/mips/bcm63xx/setup.c | 2 +
+ arch/mips/pci/Makefile | 2 +
+ arch/mips/pci/fixup-bcm63xx.c | 21 +++
+ arch/mips/pci/ops-bcm63xx.c | 179 +++++++++++++++++++++++
+ arch/mips/pci/pci-bcm63xx.c | 178 ++++++++++++++++++++++
+ arch/mips/pci/pci-bcm63xx.h | 27 ++++
+ include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h | 6 +
+ 8 files changed, 417 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/pci/fixup-bcm63xx.c
+ create mode 100644 arch/mips/pci/ops-bcm63xx.c
+ create mode 100644 arch/mips/pci/pci-bcm63xx.c
+ create mode 100644 arch/mips/pci/pci-bcm63xx.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
+
+diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
+index e6d2699..7ca370a 100644
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -3,7 +3,9 @@ menu "CPU support"
+
+ config BCM63XX_CPU_6348
+ bool "support 6348 CPU"
++ select HW_HAS_PCI
+
+ config BCM63XX_CPU_6358
+ bool "support 6358 CPU"
++ select HW_HAS_PCI
+ endmenu
+diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
+index 55c51a9..4d8b127 100644
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -105,4 +105,6 @@ void __init plat_mem_setup(void)
+ pm_power_off = bcm63xx_machine_halt;
+
+ set_io_port_base(0);
++ ioport_resource.start = 0;
++ ioport_resource.end = ~0;
+ }
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index c8c32f4..0b688a8 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
+ obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
+ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
++obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
++ ops-bcm63xx.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
+diff --git a/arch/mips/pci/fixup-bcm63xx.c b/arch/mips/pci/fixup-bcm63xx.c
+new file mode 100644
+index 0000000..3408630
+--- /dev/null
++++ b/arch/mips/pci/fixup-bcm63xx.c
+@@ -0,0 +1,21 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <bcm63xx_cpu.h>
++
++int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ return bcm63xx_get_irq_number(IRQ_PCI);
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
+diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
+new file mode 100644
+index 0000000..f8dce9d
+--- /dev/null
++++ b/arch/mips/pci/ops-bcm63xx.c
+@@ -0,0 +1,179 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++
++#include "pci-bcm63xx.h"
++
++/*
++ * swizzle 32bits data to return only the needed part
++ */
++static int postprocess_read(u32 data, int where, unsigned int size)
++{
++ u32 ret;
++
++ ret = 0;
++ switch (size) {
++ case 1:
++ ret = (data >> ((where & 3) << 3)) & 0xff;
++ break;
++ case 2:
++ ret = (data >> ((where & 3) << 3)) & 0xffff;
++ break;
++ case 4:
++ ret = data;
++ break;
++ }
++ return ret;
++}
++
++static int preprocess_write(u32 orig_data, u32 val, int where,
++ unsigned int size)
++{
++ u32 ret;
++
++ ret = 0;
++ switch (size) {
++ case 1:
++ ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 2:
++ ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 4:
++ ret = val;
++ break;
++ }
++ return ret;
++}
++
++/*
++ * setup hardware for a configuration cycle with given parameters
++ */
++static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
++ unsigned int devfn, int where)
++{
++ unsigned int slot, func, reg;
++ u32 val;
++
++ slot = PCI_SLOT(devfn);
++ func = PCI_FUNC(devfn);
++ reg = where >> 2;
++
++ /* sanity check */
++ if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
++ return 1;
++
++ if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
++ return 1;
++
++ if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
++ return 1;
++
++ /* ok, setup config access */
++ val = (reg << MPI_L2PCFG_REG_SHIFT);
++ val |= (func << MPI_L2PCFG_FUNC_SHIFT);
++ val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
++ val |= MPI_L2PCFG_CFG_USEREG_MASK;
++ val |= MPI_L2PCFG_CFG_SEL_MASK;
++ /* type 0 cycle for local bus, type 1 cycle for anything else */
++ if (type != 0) {
++ /* FIXME: how to specify bus ??? */
++ val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
++ }
++ bcm_mpi_writel(val, MPI_L2PCFG_REG);
++
++ return 0;
++}
++
++static int bcm63xx_do_cfg_read(int type, unsigned int busn,
++ unsigned int devfn, int where, int size,
++ u32 *val)
++{
++ u32 data;
++
++ /* two phase cycle, first we write address, then read data at
++ * another location, caller already has a spinlock so no need
++ * to add one here */
++ if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
++ return PCIBIOS_DEVICE_NOT_FOUND;
++ iob();
++ data = le32_to_cpu(__raw_readl(pci_iospace_start));
++ /* restore IO space normal behaviour */
++ bcm_mpi_writel(0, MPI_L2PCFG_REG);
++
++ *val = postprocess_read(data, where, size);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int bcm63xx_do_cfg_write(int type, unsigned int busn,
++ unsigned int devfn, int where, int size,
++ u32 val)
++{
++ u32 data;
++
++ /* two phase cycle, first we write address, then write data to
++ * another location, caller already has a spinlock so no need
++ * to add one here */
++ if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
++ return PCIBIOS_DEVICE_NOT_FOUND;
++ iob();
++
++ data = le32_to_cpu(__raw_readl(pci_iospace_start));
++ data = preprocess_write(data, val, where, size);
++
++ __raw_writel(cpu_to_le32(data), pci_iospace_start);
++ wmb();
++ /* no way to know the access is done, we have to wait */
++ udelay(500);
++ /* restore IO space normal behaviour */
++ bcm_mpi_writel(0, MPI_L2PCFG_REG);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 *val)
++{
++ int type;
++
++ type = bus->parent ? 1 : 0;
++
++ if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ return bcm63xx_do_cfg_read(type, bus->number, devfn,
++ where, size, val);
++}
++
++static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 val)
++{
++ int type;
++
++ type = bus->parent ? 1 : 0;
++
++ if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ return bcm63xx_do_cfg_write(type, bus->number, devfn,
++ where, size, val);
++}
++
++struct pci_ops bcm63xx_pci_ops = {
++ .read = bcm63xx_pci_read,
++ .write = bcm63xx_pci_write
++};
+diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
+new file mode 100644
+index 0000000..52bac8e
+--- /dev/null
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -0,0 +1,178 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <asm/bootinfo.h>
++
++#include "pci-bcm63xx.h"
++
++/* allow PCI to be disabled at runtime depending on board nvram
++ * configuration */
++int bcm63xx_pci_enabled = 0;
++
++static struct resource bcm_pci_mem_resource = {
++ .name = "bcm63xx PCI memory space",
++ .start = BCM_PCI_MEM_BASE_PA,
++ .end = BCM_PCI_MEM_END_PA,
++ .flags = IORESOURCE_MEM
++};
++
++static struct resource bcm_pci_io_resource = {
++ .name = "bcm63xx PCI IO space",
++ .start = BCM_PCI_IO_BASE_PA,
++ .end = BCM_PCI_IO_END_PA,
++ .flags = IORESOURCE_IO
++};
++
++struct pci_controller bcm63xx_controller = {
++ .pci_ops = &bcm63xx_pci_ops,
++ .io_resource = &bcm_pci_io_resource,
++ .mem_resource = &bcm_pci_mem_resource,
++};
++
++static u32 bcm63xx_int_cfg_readl(u32 reg)
++{
++ u32 tmp;
++
++ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
++ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
++ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
++ iob();
++ return bcm_mpi_readl(MPI_PCICFGDATA_REG);
++}
++
++static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
++{
++ u32 tmp;
++
++ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
++ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
++ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
++ bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
++}
++
++void __iomem *pci_iospace_start;
++
++static int __init bcm63xx_pci_init(void)
++{
++ unsigned int mem_size;
++ u32 val;
++
++ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
++ return -ENODEV;
++
++ if (!bcm63xx_pci_enabled)
++ return -ENODEV;
++
++ /*
++ * configuration access are done through IO space, remap 4
++ * first bytes to access it from CPU.
++ *
++ * this means that no io access from CPU should happen while
++ * we do a configuration cycle, but there's no way we can add
++ * a spinlock for each io access, so this is currently kind of
++ * broken on SMP.
++ */
++ pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4);
++ if (!pci_iospace_start)
++ return -ENOMEM;
++
++ /* setup local bus to PCI access (PCI memory) */
++ val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
++ bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
++ bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
++ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
++
++ /* set Cardbus IDSEL (type 0 cfg access on primary bus for
++ * this IDSEL will be done on Cardbus instead) */
++ val = bcm_pcmcia_readl(PCMCIA_C1_REG);
++ val &= ~PCMCIA_C1_CBIDSEL_MASK;
++ val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
++ bcm_pcmcia_writel(val, PCMCIA_C1_REG);
++
++ /* disable second access windows */
++ bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
++
++ /* setup local bus to PCI access (IO memory), we have only 1
++ * IO window for both PCI and cardbus, but it cannot handle
++ * both at the same time, assume standard PCI for now, if
++ * cardbus card has IO zone, PCI fixup will change window to
++ * cardbus */
++ val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
++ bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
++ bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
++ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
++
++ /* enable PCI related GPIO pins */
++ bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
++
++ /* setup PCI to local bus access, used by PCI device to target
++ * local RAM while bus mastering */
++ bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
++ if (BCMCPU_IS_6358())
++ val = MPI_SP0_REMAP_ENABLE_MASK;
++ else
++ val = 0;
++ bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
++
++ bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
++ bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
++
++ mem_size = bcm63xx_get_memory_size();
++
++ /* 6348 before rev b0 exposes only 16 MB of RAM memory through
++ * PCI, throw a warning if we have more memory */
++ if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
++ if (mem_size > (16 * 1024 * 1024))
++ printk(KERN_WARNING "bcm63xx: this CPU "
++ "revision cannot handle more than 16MB "
++ "of RAM for PCI bus mastering\n");
++ } else {
++ /* setup sp0 range to local RAM size */
++ bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
++ bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
++ }
++
++ /* change host bridge retry counter to infinite number of
++ * retry, needed for some broadcom wifi cards with Silicon
++ * Backplane bus where access to srom seems very slow */
++ val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
++ val &= ~REG_TIMER_RETRY_MASK;
++ bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
++
++ /* enable memory decoder and bus mastering */
++ val = bcm63xx_int_cfg_readl(PCI_COMMAND);
++ val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
++ bcm63xx_int_cfg_writel(val, PCI_COMMAND);
++
++ /* enable read prefetching & disable byte swapping for bus
++ * mastering transfers */
++ val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
++ val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
++ val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
++ val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
++ val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
++ bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
++
++ /* enable pci interrupt */
++ val = bcm_mpi_readl(MPI_LOCINT_REG);
++ val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
++ bcm_mpi_writel(val, MPI_LOCINT_REG);
++
++ register_pci_controller(&bcm63xx_controller);
++
++ /* mark memory space used for IO mapping as reserved */
++ request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
++ "bcm63xx PCI IO space");
++ return 0;
++}
++
++arch_initcall(bcm63xx_pci_init);
+diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h
+new file mode 100644
+index 0000000..a6e594e
+--- /dev/null
++++ b/arch/mips/pci/pci-bcm63xx.h
+@@ -0,0 +1,27 @@
++#ifndef PCI_BCM63XX_H_
++#define PCI_BCM63XX_H_
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_dev_pci.h>
++
++/*
++ * Cardbus shares the PCI bus, but has no IDSEL, so a special id is
++ * reserved for it. If you have a standard PCI device at this id, you
++ * need to change the following definition.
++ */
++#define CARDBUS_PCI_IDSEL 0x8
++
++/*
++ * defined in ops-bcm63xx.c
++ */
++extern struct pci_ops bcm63xx_pci_ops;
++extern struct pci_ops bcm63xx_cb_ops;
++
++/*
++ * defined in pci-bcm63xx.c
++ */
++extern void __iomem *pci_iospace_start;
++
++#endif /* ! PCI_BCM63XX_H_ */
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
+new file mode 100644
+index 0000000..c549344
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_PCI_H_
++#define BCM63XX_DEV_PCI_H_
++
++extern int bcm63xx_pci_enabled;
++
++#endif /* BCM63XX_DEV_PCI_H_ */
+--
+1.5.4.3
+
--- /dev/null
+From 6891d3c1014cf56dc76ec583b69d341ea47984d6 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 18 Jul 2008 20:34:35 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Change PCI code to emulate a fake cardbus bridge.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/pci/ops-bcm63xx.c | 288 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/pci/pci-bcm63xx.c | 44 +++++++
+ 2 files changed, 332 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
+index f8dce9d..822ae17 100644
+--- a/arch/mips/pci/ops-bcm63xx.c
++++ b/arch/mips/pci/ops-bcm63xx.c
+@@ -177,3 +177,291 @@ struct pci_ops bcm63xx_pci_ops = {
+ .read = bcm63xx_pci_read,
+ .write = bcm63xx_pci_write
+ };
++
++#ifdef CONFIG_CARDBUS
++/*
++ * emulate configuration read access on a cardbus bridge
++ */
++#define FAKE_CB_BRIDGE_SLOT 0x1e
++
++static int fake_cb_bridge_bus_number = -1;
++
++static struct {
++ u16 pci_command;
++ u8 cb_latency;
++ u8 subordinate_busn;
++ u8 cardbus_busn;
++ u8 pci_busn;
++ int bus_assigned;
++ u16 bridge_control;
++
++ u32 mem_base0;
++ u32 mem_limit0;
++ u32 mem_base1;
++ u32 mem_limit1;
++
++ u32 io_base0;
++ u32 io_limit0;
++ u32 io_base1;
++ u32 io_limit1;
++} fake_cb_bridge_regs;
++
++static int fake_cb_bridge_read(int where, int size, u32 *val)
++{
++ unsigned int reg;
++ u32 data;
++
++ data = 0;
++ reg = where >> 2;
++ switch (reg) {
++ case (PCI_VENDOR_ID >> 2):
++ case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
++ /* create dummy vendor/device id from our cpu id */
++ data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
++ break;
++
++ case (PCI_COMMAND >> 2):
++ data = (PCI_STATUS_DEVSEL_SLOW << 16);
++ data |= fake_cb_bridge_regs.pci_command;
++ break;
++
++ case (PCI_CLASS_REVISION >> 2):
++ data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
++ break;
++
++ case (PCI_CACHE_LINE_SIZE >> 2):
++ data = (PCI_HEADER_TYPE_CARDBUS << 16);
++ break;
++
++ case (PCI_INTERRUPT_LINE >> 2):
++ /* bridge control */
++ data = (fake_cb_bridge_regs.bridge_control << 16);
++ /* pin:intA line:0xff */
++ data |= (0x1 << 8) | 0xff;
++ break;
++
++ case (PCI_CB_PRIMARY_BUS >> 2):
++ data = (fake_cb_bridge_regs.cb_latency << 24);
++ data |= (fake_cb_bridge_regs.subordinate_busn << 16);
++ data |= (fake_cb_bridge_regs.cardbus_busn << 8);
++ data |= fake_cb_bridge_regs.pci_busn;
++ break;
++
++ case (PCI_CB_MEMORY_BASE_0 >> 2):
++ data = fake_cb_bridge_regs.mem_base0;
++ break;
++
++ case (PCI_CB_MEMORY_LIMIT_0 >> 2):
++ data = fake_cb_bridge_regs.mem_limit0;
++ break;
++
++ case (PCI_CB_MEMORY_BASE_1 >> 2):
++ data = fake_cb_bridge_regs.mem_base1;
++ break;
++
++ case (PCI_CB_MEMORY_LIMIT_1 >> 2):
++ data = fake_cb_bridge_regs.mem_limit1;
++ break;
++
++ case (PCI_CB_IO_BASE_0 >> 2):
++ /* | 1 for 32bits io support */
++ data = fake_cb_bridge_regs.io_base0 | 0x1;
++ break;
++
++ case (PCI_CB_IO_LIMIT_0 >> 2):
++ data = fake_cb_bridge_regs.io_limit0;
++ break;
++
++ case (PCI_CB_IO_BASE_1 >> 2):
++ /* | 1 for 32bits io support */
++ data = fake_cb_bridge_regs.io_base1 | 0x1;
++ break;
++
++ case (PCI_CB_IO_LIMIT_1 >> 2):
++ data = fake_cb_bridge_regs.io_limit1;
++ break;
++ }
++
++ *val = postprocess_read(data, where, size);
++ return PCIBIOS_SUCCESSFUL;
++}
++
++/*
++ * emulate configuration write access on a cardbus bridge
++ */
++static int fake_cb_bridge_write(int where, int size, u32 val)
++{
++ unsigned int reg;
++ u32 data, tmp;
++ int ret;
++
++ ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
++ if (ret != PCIBIOS_SUCCESSFUL)
++ return ret;
++
++ data = preprocess_write(data, val, where, size);
++
++ reg = where >> 2;
++ switch (reg) {
++ case (PCI_COMMAND >> 2):
++ fake_cb_bridge_regs.pci_command = (data & 0xffff);
++ break;
++
++ case (PCI_CB_PRIMARY_BUS >> 2):
++ fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
++ fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
++ fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
++ fake_cb_bridge_regs.pci_busn = data & 0xff;
++ if (fake_cb_bridge_regs.cardbus_busn)
++ fake_cb_bridge_regs.bus_assigned = 1;
++ break;
++
++ case (PCI_INTERRUPT_LINE >> 2):
++ tmp = (data >> 16) & 0xffff;
++ /* disable memory prefetch support */
++ tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
++ tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
++ fake_cb_bridge_regs.bridge_control = tmp;
++ break;
++
++ case (PCI_CB_MEMORY_BASE_0 >> 2):
++ fake_cb_bridge_regs.mem_base0 = data;
++ break;
++
++ case (PCI_CB_MEMORY_LIMIT_0 >> 2):
++ fake_cb_bridge_regs.mem_limit0 = data;
++ break;
++
++ case (PCI_CB_MEMORY_BASE_1 >> 2):
++ fake_cb_bridge_regs.mem_base1 = data;
++ break;
++
++ case (PCI_CB_MEMORY_LIMIT_1 >> 2):
++ fake_cb_bridge_regs.mem_limit1 = data;
++ break;
++
++ case (PCI_CB_IO_BASE_0 >> 2):
++ fake_cb_bridge_regs.io_base0 = data;
++ break;
++
++ case (PCI_CB_IO_LIMIT_0 >> 2):
++ fake_cb_bridge_regs.io_limit0 = data;
++ break;
++
++ case (PCI_CB_IO_BASE_1 >> 2):
++ fake_cb_bridge_regs.io_base1 = data;
++ break;
++
++ case (PCI_CB_IO_LIMIT_1 >> 2):
++ fake_cb_bridge_regs.io_limit1 = data;
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 *val)
++{
++ /* snoop access to slot 0x1e on root bus, we fake a cardbus
++ * bridge at this location */
++ if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
++ fake_cb_bridge_bus_number = bus->number;
++ return fake_cb_bridge_read(where, size, val);
++ }
++
++ /* a configuration cycle for the device behind the cardbus
++ * bridge is actually done as a type 0 cycle on the primary
++ * bus. This means that only one device can be on the cardbus
++ * bus */
++ if (fake_cb_bridge_regs.bus_assigned &&
++ bus->number == fake_cb_bridge_regs.cardbus_busn &&
++ PCI_SLOT(devfn) == 0)
++ return bcm63xx_do_cfg_read(0, 0,
++ PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
++ where, size, val);
++
++ return PCIBIOS_DEVICE_NOT_FOUND;
++}
++
++static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 val)
++{
++ if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
++ fake_cb_bridge_bus_number = bus->number;
++ return fake_cb_bridge_write(where, size, val);
++ }
++
++ if (fake_cb_bridge_regs.bus_assigned &&
++ bus->number == fake_cb_bridge_regs.cardbus_busn &&
++ PCI_SLOT(devfn) == 0)
++ return bcm63xx_do_cfg_write(0, 0,
++ PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
++ where, size, val);
++
++ return PCIBIOS_DEVICE_NOT_FOUND;
++}
++
++struct pci_ops bcm63xx_cb_ops = {
++ .read = bcm63xx_cb_read,
++ .write = bcm63xx_cb_write,
++};
++
++/*
++ * only one IO window, so it cannot be shared by PCI and cardbus, use
++ * fixup to choose and detect unhandled configuration
++ */
++static void bcm63xx_fixup(struct pci_dev *dev)
++{
++ static int io_window = -1;
++ int i, found, new_io_window;
++ u32 val;
++
++ /* look for any io resource */
++ found = 0;
++ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
++ if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
++ found = 1;
++ break;
++ }
++ }
++
++ if (!found)
++ return;
++
++ /* skip our fake bus with only cardbus bridge on it */
++ if (dev->bus->number == fake_cb_bridge_bus_number)
++ return;
++
++ /* find on which bus the device is */
++ if (fake_cb_bridge_regs.bus_assigned &&
++ dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
++ PCI_SLOT(dev->devfn) == 0)
++ new_io_window = 1;
++ else
++ new_io_window = 0;
++
++ if (new_io_window == io_window)
++ return;
++
++ if (io_window != -1) {
++ printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
++ "need IO, which hardware cannot do\n");
++ return;
++ }
++
++ printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
++ (new_io_window == 0) ? "PCI" : "cardbus");
++
++ val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
++ if (io_window)
++ val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
++ else
++ val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
++ bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
++
++ io_window = new_io_window;
++}
++
++DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
++#endif
+diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
+index 52bac8e..601700d 100644
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -28,7 +28,11 @@ static struct resource bcm_pci_mem_resource = {
+ static struct resource bcm_pci_io_resource = {
+ .name = "bcm63xx PCI IO space",
+ .start = BCM_PCI_IO_BASE_PA,
++#ifdef CONFIG_CARDBUS
++ .end = BCM_PCI_IO_HALF_PA,
++#else
+ .end = BCM_PCI_IO_END_PA,
++#endif
+ .flags = IORESOURCE_IO
+ };
+
+@@ -38,6 +42,33 @@ struct pci_controller bcm63xx_controller = {
+ .mem_resource = &bcm_pci_mem_resource,
+ };
+
++/*
++ * We handle cardbus via a fake Cardbus bridge, memory and io spaces
++ * have to be clearly separated from PCI one since we have different
++ * memory decoder.
++ */
++#ifdef CONFIG_CARDBUS
++static struct resource bcm_cb_mem_resource = {
++ .name = "bcm63xx Cardbus memory space",
++ .start = BCM_CB_MEM_BASE_PA,
++ .end = BCM_CB_MEM_END_PA,
++ .flags = IORESOURCE_MEM
++};
++
++static struct resource bcm_cb_io_resource = {
++ .name = "bcm63xx Cardbus IO space",
++ .start = BCM_PCI_IO_HALF_PA + 1,
++ .end = BCM_PCI_IO_END_PA,
++ .flags = IORESOURCE_IO
++};
++
++struct pci_controller bcm63xx_cb_controller = {
++ .pci_ops = &bcm63xx_cb_ops,
++ .io_resource = &bcm_cb_io_resource,
++ .mem_resource = &bcm_cb_mem_resource,
++};
++#endif
++
+ static u32 bcm63xx_int_cfg_readl(u32 reg)
+ {
+ u32 tmp;
+@@ -98,8 +129,17 @@ static int __init bcm63xx_pci_init(void)
+ val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
+ bcm_pcmcia_writel(val, PCMCIA_C1_REG);
+
++#ifdef CONFIG_CARDBUS
++ /* setup local bus to PCI access (Cardbus memory) */
++ val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
++ bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
++ bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
++ val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
++ bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
++#else
+ /* disable second access windows */
+ bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
++#endif
+
+ /* setup local bus to PCI access (IO memory), we have only 1
+ * IO window for both PCI and cardbus, but it cannot handle
+@@ -169,6 +209,10 @@ static int __init bcm63xx_pci_init(void)
+
+ register_pci_controller(&bcm63xx_controller);
+
++#ifdef CONFIG_CARDBUS
++ register_pci_controller(&bcm63xx_cb_controller);
++#endif
++
+ /* mark memory space used for IO mapping as reserved */
+ request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
+ "bcm63xx PCI IO space");
+--
+1.5.4.3
+
--- /dev/null
+From b17597be763621ba63534fda6e1ea0a802be2087 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 18 Jul 2008 21:18:51 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add PCMCIA & Cardbus support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-pcmcia.c | 135 +++++
+ drivers/pcmcia/Kconfig | 4 +
+ drivers/pcmcia/Makefile | 1 +
+ drivers/pcmcia/bcm63xx_pcmcia.c | 521 ++++++++++++++++++++
+ drivers/pcmcia/bcm63xx_pcmcia.h | 65 +++
+ include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h | 13 +
+ 7 files changed, 740 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-pcmcia.c
+ create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.c
+ create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h
+
+diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
+index 8f3299e..456e915 100644
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,3 +1,4 @@
+ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o
+ obj-y += dev-uart.o
++obj-y += dev-pcmcia.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
+new file mode 100644
+index 0000000..40ec4bc
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-pcmcia.c
+@@ -0,0 +1,135 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <asm/bootinfo.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cs.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++
++static struct resource pcmcia_resources[] = {
++ /* pcmcia registers */
++ {
++ .start = -1, /* filled at runtime */
++ .end = -1, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++
++ /* pcmcia memory zone resources */
++ {
++ .start = BCM_PCMCIA_COMMON_BASE_PA,
++ .end = BCM_PCMCIA_COMMON_END_PA,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = BCM_PCMCIA_ATTR_BASE_PA,
++ .end = BCM_PCMCIA_ATTR_END_PA,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = BCM_PCMCIA_IO_BASE_PA,
++ .end = BCM_PCMCIA_IO_END_PA,
++ .flags = IORESOURCE_MEM,
++ },
++
++ /* PCMCIA irq */
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++
++ /* declare PCMCIA IO resource also */
++ {
++ .start = BCM_PCMCIA_IO_BASE_PA,
++ .end = BCM_PCMCIA_IO_END_PA,
++ .flags = IORESOURCE_IO,
++ },
++};
++
++static struct bcm63xx_pcmcia_platform_data pd;
++
++static struct platform_device bcm63xx_pcmcia_device = {
++ .name = "bcm63xx_pcmcia",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(pcmcia_resources),
++ .resource = pcmcia_resources,
++ .dev = {
++ .platform_data = &pd,
++ },
++};
++
++static int __init config_pcmcia_cs(unsigned int cs,
++ u32 base, unsigned int size)
++{
++ int ret;
++
++ ret = bcm63xx_set_cs_status(cs, 0);
++ if (!ret)
++ ret = bcm63xx_set_cs_base(cs, base, size);
++ if (!ret)
++ ret = bcm63xx_set_cs_status(cs, 1);
++ return ret;
++}
++
++static const __initdata unsigned int pcmcia_cs[3][3] = {
++ /* cs, base address, size */
++ { MPI_CS_PCMCIA_COMMON, BCM_PCMCIA_COMMON_BASE_PA,
++ BCM_PCMCIA_COMMON_SIZE },
++
++ { MPI_CS_PCMCIA_ATTR, BCM_PCMCIA_ATTR_BASE_PA,
++ BCM_PCMCIA_ATTR_SIZE },
++
++ { MPI_CS_PCMCIA_IO, BCM_PCMCIA_IO_BASE_PA,
++ BCM_PCMCIA_IO_SIZE },
++};
++
++int __init bcm63xx_pcmcia_register(void)
++{
++ int ret, i;
++
++ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
++ return 0;
++
++ /* use correct pcmcia ready gpio depending on processor */
++ switch (bcm63xx_get_cpu_id()) {
++ case BCM6348_CPU_ID:
++ pd.ready_gpio = 22;
++ break;
++
++ case BCM6358_CPU_ID:
++ pd.ready_gpio = 22;
++ break;
++
++ default:
++ return -ENODEV;
++ }
++
++ pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
++ pcmcia_resources[0].end = pcmcia_resources[0].start;
++ pcmcia_resources[0].end += RSET_PCMCIA_SIZE - 1;
++ pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA);
++
++ /* configure pcmcia chip selects */
++ for (i = 0; i < 3; i++) {
++ ret = config_pcmcia_cs(pcmcia_cs[i][0],
++ pcmcia_cs[i][1],
++ pcmcia_cs[i][2]);
++ if (ret)
++ goto out_err;
++ }
++
++ return platform_device_register(&bcm63xx_pcmcia_device);
++
++out_err:
++ printk(KERN_ERR "unable to set pcmcia chip select");
++ return ret;
++}
+diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
+index e0f8840..5c640ca 100644
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -196,6 +196,10 @@ config PCMCIA_AU1X00
+ tristate "Au1x00 pcmcia support"
+ depends on SOC_AU1X00 && PCMCIA
+
++config PCMCIA_BCM63XX
++ tristate "bcm63xx pcmcia support"
++ depends on BCM63XX && PCMCIA
++
+ config PCMCIA_SA1100
+ tristate "SA1100 support"
+ depends on ARM && ARCH_SA1100 && PCMCIA
+diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
+index 269a9e9..32b19b5 100644
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o pxa2xx_cs.o
+ obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
+ obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
+ obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
++obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o
+ obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
+ obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
+ obj-$(CONFIG_OMAP_CF) += omap_cf.o
+diff --git a/drivers/pcmcia/bcm63xx_pcmcia.c b/drivers/pcmcia/bcm63xx_pcmcia.c
+new file mode 100644
+index 0000000..3a0b7fc
+--- /dev/null
++++ b/drivers/pcmcia/bcm63xx_pcmcia.c
+@@ -0,0 +1,521 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/ioport.h>
++#include <linux/timer.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/pci.h>
++#include <linux/gpio.h>
++
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include "bcm63xx_pcmcia.h"
++
++#define PFX "bcm63xx_pcmcia: "
++
++#ifdef CONFIG_CARDBUS
++/* if cardbus is used, platform device needs reference to actual pci
++ * device */
++static struct pci_dev *bcm63xx_cb_dev;
++#endif
++
++/*
++ * read/write helper for pcmcia regs
++ */
++static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
++{
++ return bcm_readl(skt->base + off);
++}
++
++static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
++ u32 val, u32 off)
++{
++ bcm_writel(val, skt->base + off);
++}
++
++/*
++ * (Re-)Initialise the socket, turning on status interrupts and PCMCIA
++ * bus. This must wait for power to stabilise so that the card status
++ * signals report correctly.
++ */
++static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
++{
++ struct bcm63xx_pcmcia_socket *skt;
++ skt = sock->driver_data;
++ return 0;
++}
++
++/*
++ * Remove power on the socket, disable IRQs from the card.
++ * Turn off status interrupts, and disable the PCMCIA bus.
++ */
++static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
++{
++ struct bcm63xx_pcmcia_socket *skt;
++ skt = sock->driver_data;
++ return 0;
++}
++
++/*
++ * Implements the set_socket() operation for the in-kernel PCMCIA
++ * service (formerly SS_SetSocket in Card Services). We more or
++ * less punt all of this work and let the kernel handle the details
++ * of power configuration, reset, &c. We also record the value of
++ * `state' in order to regurgitate it to the PCMCIA core later.
++ */
++static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
++ socket_state_t *state)
++{
++ struct bcm63xx_pcmcia_socket *skt;
++ unsigned long flags;
++ u32 val;
++
++ skt = sock->driver_data;
++
++ spin_lock_irqsave(&skt->lock, flags);
++
++ /* apply requested socket power */
++ /* FIXME: hardware can't do this */
++
++ /* apply socket reset */
++ val = pcmcia_readl(skt, PCMCIA_C1_REG);
++ if (state->flags & SS_RESET)
++ val |= PCMCIA_C1_RESET_MASK;
++ else
++ val &= ~PCMCIA_C1_RESET_MASK;
++
++ /* reverse reset logic for cardbus card */
++ if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
++ val ^= PCMCIA_C1_RESET_MASK;
++
++ pcmcia_writel(skt, val, PCMCIA_C1_REG);
++
++ /* keep requested state for event reporting */
++ skt->requested_state = *state;
++
++ spin_unlock_irqrestore(&skt->lock, flags);
++
++ return 0;
++}
++
++/*
++ * identity cardtype from VS[12] input, CD[12] input while only VS2 is
++ * floating, and CD[12] input while only VS1 is floating
++ */
++enum {
++ IN_VS1 = (1 << 0),
++ IN_VS2 = (1 << 1),
++ IN_CD1_VS2H = (1 << 2),
++ IN_CD2_VS2H = (1 << 3),
++ IN_CD1_VS1H = (1 << 4),
++ IN_CD2_VS1H = (1 << 5),
++};
++
++static const u8 vscd_to_cardtype[] = {
++
++ /* VS1 float, VS2 float */
++ [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
++
++ /* VS1 grounded, VS2 float */
++ [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
++
++ /* VS1 grounded, VS2 grounded */
++ [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
++
++ /* VS1 tied to CD1, VS2 float */
++ [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
++
++ /* VS1 grounded, VS2 tied to CD2 */
++ [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
++
++ /* VS1 tied to CD2, VS2 grounded */
++ [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
++
++ /* VS1 float, VS2 grounded */
++ [IN_VS1] = (CARD_PCCARD | CARD_XV),
++
++ /* VS1 float, VS2 tied to CD2 */
++ [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
++
++ /* VS1 float, VS2 tied to CD1 */
++ [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
++
++ /* VS1 tied to CD2, VS2 float */
++ [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
++
++ /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
++ [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
++};
++
++/*
++ * poll hardware to check card insertion status
++ */
++static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
++{
++ unsigned int stat;
++ u32 val;
++
++ stat = 0;
++
++ /* check CD for card presence */
++ val = pcmcia_readl(skt, PCMCIA_C1_REG);
++
++ if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
++ stat |= SS_DETECT;
++
++ /* if new insertion, detect cardtype */
++ if ((stat & SS_DETECT) && !skt->card_detected) {
++ unsigned int stat = 0;
++
++ /* float VS1, float VS2 */
++ val |= PCMCIA_C1_VS1OE_MASK;
++ val |= PCMCIA_C1_VS2OE_MASK;
++ pcmcia_writel(skt, val, PCMCIA_C1_REG);
++
++ /* wait for output to stabilize and read VS[12] */
++ udelay(10);
++ val = pcmcia_readl(skt, PCMCIA_C1_REG);
++ stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
++ stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
++
++ /* drive VS1 low, float VS2 */
++ val &= ~PCMCIA_C1_VS1OE_MASK;
++ val |= PCMCIA_C1_VS2OE_MASK;
++ pcmcia_writel(skt, val, PCMCIA_C1_REG);
++
++ /* wait for output to stabilize and read CD[12] */
++ udelay(10);
++ val = pcmcia_readl(skt, PCMCIA_C1_REG);
++ stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
++ stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
++
++ /* float VS1, drive VS2 low */
++ val |= PCMCIA_C1_VS1OE_MASK;
++ val &= ~PCMCIA_C1_VS2OE_MASK;
++ pcmcia_writel(skt, val, PCMCIA_C1_REG);
++
++ /* wait for output to stabilize and read CD[12] */
++ udelay(10);
++ val = pcmcia_readl(skt, PCMCIA_C1_REG);
++ stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
++ stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
++
++ /* guess cardtype from all this */
++ skt->card_type = vscd_to_cardtype[stat];
++ if (!skt->card_type)
++ printk(KERN_ERR PFX "unsupported card type\n");
++
++ /* drive both VS pin to 0 again */
++ val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
++
++ /* enable correct logic */
++ val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
++ if (skt->card_type & CARD_PCCARD)
++ val |= PCMCIA_C1_EN_PCMCIA_MASK;
++ else
++ val |= PCMCIA_C1_EN_CARDBUS_MASK;
++
++ pcmcia_writel(skt, val, PCMCIA_C1_REG);
++ }
++ skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
++
++ /* report card type/voltage */
++ if (skt->card_type & CARD_CARDBUS)
++ stat |= SS_CARDBUS;
++ if (skt->card_type & CARD_3V)
++ stat |= SS_3VCARD;
++ if (skt->card_type & CARD_XV)
++ stat |= SS_XVCARD;
++ stat |= SS_POWERON;
++
++ if (gpio_get_value(skt->pd->ready_gpio))
++ stat |= SS_READY;
++
++ return stat;
++}
++
++/*
++ * core request to get current socket status
++ */
++static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
++ unsigned int *status)
++{
++ struct bcm63xx_pcmcia_socket *skt;
++
++ skt = sock->driver_data;
++
++ spin_lock_bh(&skt->lock);
++ *status = __get_socket_status(skt);
++ spin_unlock_bh(&skt->lock);
++
++ return 0;
++}
++
++/*
++ * socket polling timer callback
++ */
++static void bcm63xx_pcmcia_poll(unsigned long data)
++{
++ struct bcm63xx_pcmcia_socket *skt;
++ unsigned int stat, events;
++
++ skt = (struct bcm63xx_pcmcia_socket *)data;
++
++ spin_lock_bh(&skt->lock);
++
++ stat = __get_socket_status(skt);
++
++ /* keep only changed bits, and mask with required one from the
++ * core */
++ events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
++ skt->old_status = stat;
++ spin_unlock_bh(&skt->lock);
++
++ if (events)
++ pcmcia_parse_events(&skt->socket, events);
++
++ mod_timer(&skt->timer,
++ jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
++}
++
++static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
++ struct pccard_io_map *map)
++{
++ /* this doesn't seem to be called by pcmcia layer if static
++ * mapping is used */
++ return 0;
++}
++
++static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
++ struct pccard_mem_map *map)
++{
++ struct bcm63xx_pcmcia_socket *skt;
++ struct resource *res;
++
++ skt = sock->driver_data;
++ if (map->flags & MAP_ATTRIB)
++ res = skt->attr_res;
++ else
++ res = skt->common_res;
++
++ map->static_start = res->start + map->card_start;
++ return 0;
++}
++
++static struct pccard_operations bcm63xx_pcmcia_operations = {
++ .init = bcm63xx_pcmcia_sock_init,
++ .suspend = bcm63xx_pcmcia_suspend,
++ .get_status = bcm63xx_pcmcia_get_status,
++ .set_socket = bcm63xx_pcmcia_set_socket,
++ .set_io_map = bcm63xx_pcmcia_set_io_map,
++ .set_mem_map = bcm63xx_pcmcia_set_mem_map,
++};
++
++/*
++ * register pcmcia socket to core
++ */
++static int bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
++{
++ struct bcm63xx_pcmcia_socket *skt;
++ struct pcmcia_socket *sock;
++ struct resource *res, *irq_res;
++ unsigned int regmem_size = 0, iomem_size = 0;
++ u32 val;
++ int ret;
++
++ skt = kzalloc(sizeof(*skt), GFP_KERNEL);
++ if (!skt)
++ return -ENOMEM;
++ spin_lock_init(&skt->lock);
++ sock = &skt->socket;
++ sock->driver_data = skt;
++
++ /* make sure we have all resources we need */
++ skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
++ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ skt->pd = pdev->dev.platform_data;
++ if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) {
++ ret = -EINVAL;
++ goto err;
++ }
++
++ /* remap pcmcia registers */
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ regmem_size = res->end - res->start + 1;
++ if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
++ ret = -EINVAL;
++ goto err;
++ }
++ skt->reg_res = res;
++
++ skt->base = ioremap(res->start, regmem_size);
++ if (!skt->base) {
++ ret = -ENOMEM;
++ goto err;
++ }
++
++ /* remap io registers */
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
++ iomem_size = res->end - res->start + 1;
++ skt->io_base = ioremap(res->start, iomem_size);
++ if (!skt->io_base) {
++ ret = -ENOMEM;
++ goto err;
++ }
++
++ /* resources are static */
++ sock->resource_ops = &pccard_static_ops;
++ sock->ops = &bcm63xx_pcmcia_operations;
++ sock->owner = THIS_MODULE;
++ sock->dev.parent = &pdev->dev;
++ sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
++ sock->io_offset = (unsigned long)skt->io_base;
++ sock->pci_irq = irq_res->start;
++
++#ifdef CONFIG_CARDBUS
++ sock->cb_dev = bcm63xx_cb_dev;
++ if (bcm63xx_cb_dev)
++ sock->features |= SS_CAP_CARDBUS;
++#endif
++
++ /* assume common & attribute memory have the same size */
++ sock->map_size = skt->common_res->end - skt->common_res->start + 1;
++
++ /* initialize polling timer */
++ setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt);
++
++ /* initialize pcmcia control register, drive VS[12] to 0,
++ * leave CB IDSEL to the old value since it is set by the PCI
++ * layer */
++ val = pcmcia_readl(skt, PCMCIA_C1_REG);
++ val &= PCMCIA_C1_CBIDSEL_MASK;
++ val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
++ pcmcia_writel(skt, val, PCMCIA_C1_REG);
++
++ /* FIXME set correct pcmcia timings */
++ val = PCMCIA_C2_DATA16_MASK;
++ val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
++ val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
++ val |= 3 << PCMCIA_C2_SETUP_SHIFT;
++ val |= 3 << PCMCIA_C2_HOLD_SHIFT;
++ pcmcia_writel(skt, val, PCMCIA_C2_REG);
++
++ ret = pcmcia_register_socket(sock);
++ if (ret)
++ goto err;
++
++ /* start polling socket */
++ mod_timer(&skt->timer,
++ jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
++
++ platform_set_drvdata(pdev, skt);
++ return 0;
++
++err:
++ if (skt->io_base)
++ iounmap(skt->io_base);
++ if (skt->base)
++ iounmap(skt->base);
++ if (skt->reg_res)
++ release_mem_region(skt->reg_res->start, regmem_size);
++ kfree(skt);
++ return ret;
++}
++
++static int bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
++{
++ struct bcm63xx_pcmcia_socket *skt;
++ struct resource *res;
++
++ skt = platform_get_drvdata(pdev);
++ del_timer_sync(&skt->timer);
++ iounmap(skt->base);
++ iounmap(skt->io_base);
++ res = skt->reg_res;
++ release_mem_region(res->start, res->end - res->start + 1);
++ kfree(skt);
++ return 0;
++}
++
++struct platform_driver bcm63xx_pcmcia_driver = {
++ .probe = bcm63xx_drv_pcmcia_probe,
++ .remove = __devexit_p(bcm63xx_drv_pcmcia_remove),
++ .driver = {
++ .name = "bcm63xx_pcmcia",
++ .owner = THIS_MODULE,
++ },
++};
++
++#ifdef CONFIG_CARDBUS
++static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
++ const struct pci_device_id *id)
++{
++ /* keep pci device */
++ bcm63xx_cb_dev = dev;
++ return platform_driver_register(&bcm63xx_pcmcia_driver);
++}
++
++static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
++{
++ platform_driver_unregister(&bcm63xx_pcmcia_driver);
++ bcm63xx_cb_dev = NULL;
++}
++
++static struct pci_device_id bcm63xx_cb_table[] = {
++ {
++ .vendor = PCI_VENDOR_ID_BROADCOM,
++ .device = PCI_ANY_ID,
++ .subvendor = PCI_VENDOR_ID_BROADCOM,
++ .subdevice = PCI_ANY_ID,
++ .class = PCI_CLASS_BRIDGE_CARDBUS << 8,
++ .class_mask = ~0,
++ },
++};
++
++MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
++
++static struct pci_driver bcm63xx_cardbus_driver = {
++ .name = "yenta_cardbus",
++ .id_table = bcm63xx_cb_table,
++ .probe = bcm63xx_cb_probe,
++ .remove = __devexit_p(bcm63xx_cb_exit),
++};
++#endif
++
++/*
++ * if cardbus support is enabled, register our platform device after
++ * our fake cardbus bridge has been registered
++ */
++static int __init bcm63xx_pcmcia_init(void)
++{
++#ifdef CONFIG_CARDBUS
++ return pci_register_driver(&bcm63xx_cardbus_driver);
++#else
++ return platform_driver_register(&bcm63xx_pcmcia_driver);
++#endif
++}
++
++static void __exit bcm63xx_pcmcia_exit(void)
++{
++#ifdef CONFIG_CARDBUS
++ return pci_unregister_driver(&bcm63xx_cardbus_driver);
++#else
++ platform_driver_unregister(&bcm63xx_pcmcia_driver);
++#endif
++}
++
++module_init(bcm63xx_pcmcia_init);
++module_exit(bcm63xx_pcmcia_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
++MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");
+diff --git a/drivers/pcmcia/bcm63xx_pcmcia.h b/drivers/pcmcia/bcm63xx_pcmcia.h
+new file mode 100644
+index 0000000..85de866
+--- /dev/null
++++ b/drivers/pcmcia/bcm63xx_pcmcia.h
+@@ -0,0 +1,65 @@
++#ifndef BCM63XX_PCMCIA_H_
++#define BCM63XX_PCMCIA_H_
++
++#include <linux/types.h>
++#include <linux/timer.h>
++#include <pcmcia/ss.h>
++#include <bcm63xx_dev_pcmcia.h>
++
++/* socket polling rate in ms */
++#define BCM63XX_PCMCIA_POLL_RATE 500
++
++enum {
++ CARD_CARDBUS = (1 << 0),
++
++ CARD_PCCARD = (1 << 1),
++
++ CARD_5V = (1 << 2),
++
++ CARD_3V = (1 << 3),
++
++ CARD_XV = (1 << 4),
++
++ CARD_YV = (1 << 5),
++};
++
++struct bcm63xx_pcmcia_socket {
++ struct pcmcia_socket socket;
++
++ /* platform specific data */
++ struct bcm63xx_pcmcia_platform_data *pd;
++
++ /* all regs access are protected by this spinlock */
++ spinlock_t lock;
++
++ /* pcmcia registers resource */
++ struct resource *reg_res;
++
++ /* base remapped address of registers */
++ void __iomem *base;
++
++ /* whether a card is detected at the moment */
++ int card_detected;
++
++ /* type of detected card (mask of above enum) */
++ u8 card_type;
++
++ /* keep last socket status to implement event reporting */
++ unsigned int old_status;
++
++ /* backup of requested socket state */
++ socket_state_t requested_state;
++
++ /* timer used for socket status polling */
++ struct timer_list timer;
++
++ /* attribute/common memory resources */
++ struct resource *attr_res;
++ struct resource *common_res;
++ struct resource *io_res;
++
++ /* base address of io memory */
++ void __iomem *io_base;
++};
++
++#endif /* BCM63XX_PCMCIA_H_ */
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h
+new file mode 100644
+index 0000000..2beb396
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h
+@@ -0,0 +1,13 @@
++#ifndef BCM63XX_DEV_PCMCIA_H_
++#define BCM63XX_DEV_PCMCIA_H_
++
++/*
++ * PCMCIA driver platform data
++ */
++struct bcm63xx_pcmcia_platform_data {
++ unsigned int ready_gpio;
++};
++
++int bcm63xx_pcmcia_register(void);
++
++#endif /* BCM63XX_DEV_PCMCIA_H_ */
+--
+1.5.4.3
+
--- /dev/null
+From f7416412febd7efc1d33c7506c81265719368667 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Mon, 21 Jul 2008 14:58:19 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add USB OHCI support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig | 6 +
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-usb-ohci.c | 50 ++++++
+ drivers/usb/host/ohci-bcm63xx.c | 159 ++++++++++++++++++++
+ drivers/usb/host/ohci-hcd.c | 5 +
+ drivers/usb/host/ohci.h | 7 +-
+ .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 +
+ 7 files changed, 233 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
+ create mode 100644 drivers/usb/host/ohci-bcm63xx.c
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+
+diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
+index 7ca370a..f2ddb87 100644
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -4,8 +4,14 @@ menu "CPU support"
+ config BCM63XX_CPU_6348
+ bool "support 6348 CPU"
+ select HW_HAS_PCI
++ select USB_ARCH_HAS_OHCI
++ select USB_OHCI_BIG_ENDIAN_DESC
++ select USB_OHCI_BIG_ENDIAN_MMIO
+
+ config BCM63XX_CPU_6358
+ bool "support 6358 CPU"
+ select HW_HAS_PCI
++ select USB_ARCH_HAS_OHCI
++ select USB_OHCI_BIG_ENDIAN_DESC
++ select USB_OHCI_BIG_ENDIAN_MMIO
+ endmenu
+diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
+index 456e915..75f0d54 100644
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,4 +1,5 @@
+ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o
+ obj-y += dev-uart.o
+ obj-y += dev-pcmcia.o
++obj-y += dev-usb-ohci.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+diff --git a/arch/mips/bcm63xx/dev-usb-ohci.c b/arch/mips/bcm63xx/dev-usb-ohci.c
+new file mode 100644
+index 0000000..377e67c
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -0,0 +1,50 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_usb_ohci.h>
++
++static struct resource ohci_resources[] = {
++ {
++ .start = -1, /* filled at runtime */
++ .end = -1, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static u64 ohci_dmamask = ~(u32)0;
++
++static struct platform_device bcm63xx_ohci_device = {
++ .name = "bcm63xx_ohci",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(ohci_resources),
++ .resource = ohci_resources,
++ .dev = {
++ .dma_mask = &ohci_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++};
++
++int __init bcm63xx_ohci_register(void)
++{
++ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
++ return 0;
++
++ ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
++ ohci_resources[0].end = ohci_resources[0].start;
++ ohci_resources[0].end += RSET_OHCI_SIZE - 1;
++ ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
++ return platform_device_register(&bcm63xx_ohci_device);
++}
+diff --git a/drivers/usb/host/ohci-bcm63xx.c b/drivers/usb/host/ohci-bcm63xx.c
+new file mode 100644
+index 0000000..08807d9
+--- /dev/null
++++ b/drivers/usb/host/ohci-bcm63xx.c
+@@ -0,0 +1,159 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++
++static struct clk *usb_host_clock;
++
++static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd)
++{
++ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++ int ret;
++
++ ret = ohci_init(ohci);
++ if (ret < 0)
++ return ret;
++
++ /* FIXME: autodetected port 2 is shared with USB slave */
++
++ ret = ohci_run(ohci);
++ if (ret < 0) {
++ err("can't start %s", hcd->self.bus_name);
++ ohci_stop(hcd);
++ return ret;
++ }
++ return 0;
++}
++
++static const struct hc_driver ohci_bcm63xx_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "BCM63XX integrated OHCI controller",
++ .hcd_priv_size = sizeof(struct ohci_hcd),
++
++ .irq = ohci_irq,
++ .flags = HCD_USB11 | HCD_MEMORY,
++ .start = ohci_bcm63xx_start,
++ .stop = ohci_stop,
++ .shutdown = ohci_shutdown,
++ .urb_enqueue = ohci_urb_enqueue,
++ .urb_dequeue = ohci_urb_dequeue,
++ .endpoint_disable = ohci_endpoint_disable,
++ .get_frame_number = ohci_get_frame,
++ .hub_status_data = ohci_hub_status_data,
++ .hub_control = ohci_hub_control,
++ .start_port_reset = ohci_start_port_reset,
++};
++
++static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
++{
++ struct resource *res_mem, *res_irq;
++ struct usb_hcd *hcd;
++ struct ohci_hcd *ohci;
++ u32 reg;
++ int ret;
++
++ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ if (!res_mem || !res_irq)
++ return -ENODEV;
++
++ if (BCMCPU_IS_6348()) {
++ struct clk *clk;
++ /* enable USB host clock */
++ clk = clk_get(&pdev->dev, "usbh");
++ if (IS_ERR(clk))
++ return -ENODEV;
++
++ clk_enable(clk);
++ usb_host_clock = clk;
++ bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
++
++ } else if (BCMCPU_IS_6358()) {
++ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
++ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
++ /* don't ask... */
++ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
++ } else
++ return 0;
++
++ hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
++ if (!hcd)
++ return -ENOMEM;
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++ pr_debug("request_mem_region failed\n");
++ ret = -EBUSY;
++ goto out;
++ }
++
++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs) {
++ pr_debug("ioremap failed\n");
++ ret = -EIO;
++ goto out1;
++ }
++
++ ohci = hcd_to_ohci(hcd);
++ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
++ OHCI_QUIRK_FRAME_NO;
++ ohci_hcd_init(ohci);
++
++ ret = usb_add_hcd(hcd, res_irq->start, IRQF_DISABLED);
++ if (ret)
++ goto out2;
++
++ platform_set_drvdata(pdev, hcd);
++ return 0;
++
++out2:
++ iounmap(hcd->regs);
++out1:
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++out:
++ usb_put_hcd(hcd);
++ return ret;
++}
++
++static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(pdev);
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ usb_put_hcd(hcd);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ if (usb_host_clock) {
++ clk_disable(usb_host_clock);
++ clk_put(usb_host_clock);
++ }
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
++
++static struct platform_driver ohci_hcd_bcm63xx_driver = {
++ .probe = ohci_hcd_bcm63xx_drv_probe,
++ .remove = __devexit_p(ohci_hcd_bcm63xx_drv_remove),
++ .shutdown = usb_hcd_platform_shutdown,
++ .driver = {
++ .name = "bcm63xx_ohci",
++ .owner = THIS_MODULE,
++ .bus = &platform_bus_type
++ },
++};
++
++MODULE_ALIAS("platform:bcm63xx_ohci");
+diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
+index 8990196..7e360ef 100644
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1050,6 +1050,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER usb_hcd_pnx4008_driver
+ #endif
+
++#ifdef CONFIG_BCM63XX
++#include "ohci-bcm63xx.c"
++#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver
++#endif
++
+ #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7763)
+diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
+index faf622e..947e240 100644
+--- a/drivers/usb/host/ohci.h
++++ b/drivers/usb/host/ohci.h
+@@ -549,6 +549,11 @@ static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci)
+ #define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
+ #endif
+
++#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX)
++#define readl_be(addr) __raw_readl((__force unsigned *)addr)
++#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
++#endif
++
+ static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
+ __hc32 __iomem * regs)
+ {
+@@ -654,7 +659,7 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
+ * some big-endian SOC implementations. Same thing happens with PSW access.
+ */
+
+-#ifdef CONFIG_PPC_MPC52xx
++#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
+ #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
+ #else
+ #define big_endian_frame_no_quirk(ohci) 0
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+new file mode 100644
+index 0000000..518a04d
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_OHCI_H_
++#define BCM63XX_DEV_USB_OHCI_H_
++
++int bcm63xx_ohci_register(void);
++
++#endif /* BCM63XX_DEV_USB_OHCI_H_ */
+--
+1.5.4.3
+
--- /dev/null
+From 2940d1996c86c4c4dd7a82214f846d0c0b707165 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Mon, 21 Jul 2008 18:24:42 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add USB EHCI support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig | 2 +
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-usb-ehci.c | 50 +++++++
+ drivers/usb/host/ehci-bcm63xx.c | 152 ++++++++++++++++++++
+ drivers/usb/host/ehci-hcd.c | 5 +
+ drivers/usb/host/ehci.h | 5 +
+ .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 +
+ 7 files changed, 221 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
+ create mode 100644 drivers/usb/host/ehci-bcm63xx.c
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+
+diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
+index f2ddb87..be120f7 100644
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -14,4 +14,6 @@ config BCM63XX_CPU_6358
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
++ select USB_ARCH_HAS_EHCI
++ select USB_EHCI_BIG_ENDIAN_MMIO
+ endmenu
+diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
+index 75f0d54..99e335d 100644
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,4 +2,5 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o
+ obj-y += dev-uart.o
+ obj-y += dev-pcmcia.o
+ obj-y += dev-usb-ohci.o
++obj-y += dev-usb-ehci.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+diff --git a/arch/mips/bcm63xx/dev-usb-ehci.c b/arch/mips/bcm63xx/dev-usb-ehci.c
+new file mode 100644
+index 0000000..7885405
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -0,0 +1,50 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_usb_ehci.h>
++
++static struct resource ehci_resources[] = {
++ {
++ .start = -1, /* filled at runtime */
++ .end = -1, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static u64 ehci_dmamask = ~(u32)0;
++
++static struct platform_device bcm63xx_ehci_device = {
++ .name = "bcm63xx_ehci",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(ehci_resources),
++ .resource = ehci_resources,
++ .dev = {
++ .dma_mask = &ehci_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++};
++
++int __init bcm63xx_ehci_register(void)
++{
++ if (!BCMCPU_IS_6358())
++ return 0;
++
++ ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
++ ehci_resources[0].end = ehci_resources[0].start;
++ ehci_resources[0].end += RSET_EHCI_SIZE - 1;
++ ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
++ return platform_device_register(&bcm63xx_ehci_device);
++}
+diff --git a/drivers/usb/host/ehci-bcm63xx.c b/drivers/usb/host/ehci-bcm63xx.c
+new file mode 100644
+index 0000000..2fef571
+--- /dev/null
++++ b/drivers/usb/host/ehci-bcm63xx.c
+@@ -0,0 +1,152 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++
++static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++ int retval;
++
++ retval = ehci_halt(ehci);
++ if (retval)
++ return retval;
++
++ retval = ehci_init(hcd);
++ if (retval)
++ return retval;
++
++ hcd->has_tt = 1;
++ ehci_reset(ehci);
++ ehci_port_power(ehci, 0);
++
++ return retval;
++}
++
++
++static const struct hc_driver ehci_bcm63xx_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "BCM63XX integrated EHCI controller",
++ .hcd_priv_size = sizeof(struct ehci_hcd),
++
++ .irq = ehci_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ .reset = ehci_bcm63xx_setup,
++ .start = ehci_run,
++ .stop = ehci_stop,
++ .shutdown = ehci_shutdown,
++
++ .urb_enqueue = ehci_urb_enqueue,
++ .urb_dequeue = ehci_urb_dequeue,
++ .endpoint_disable = ehci_endpoint_disable,
++
++ .get_frame_number = ehci_get_frame,
++
++ .hub_status_data = ehci_hub_status_data,
++ .hub_control = ehci_hub_control,
++ .bus_suspend = ehci_bus_suspend,
++ .bus_resume = ehci_bus_resume,
++ .relinquish_port = ehci_relinquish_port,
++ .port_handed_over = ehci_port_handed_over,
++};
++
++static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
++{
++ struct resource *res_mem, *res_irq;
++ struct usb_hcd *hcd;
++ struct ehci_hcd *ehci;
++ u32 reg;
++ int ret;
++
++ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ if (!res_mem || !res_irq)
++ return -ENODEV;
++
++ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
++ reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
++ reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
++
++ /* don't ask... */
++ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
++
++ hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
++ if (!hcd)
++ return -ENOMEM;
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++ pr_debug("request_mem_region failed\n");
++ ret = -EBUSY;
++ goto out;
++ }
++
++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs) {
++ pr_debug("ioremap failed\n");
++ ret = -EIO;
++ goto out1;
++ }
++
++ ehci = hcd_to_ehci(hcd);
++ ehci->big_endian_mmio = 1;
++ ehci->big_endian_desc = 0;
++ ehci->caps = hcd->regs;
++ ehci->regs = hcd->regs +
++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++ ehci->sbrn = 0x20;
++
++ ret = usb_add_hcd(hcd, res_irq->start, IRQF_DISABLED);
++ if (ret)
++ goto out2;
++
++ platform_set_drvdata(pdev, hcd);
++ return 0;
++
++out2:
++ iounmap(hcd->regs);
++out1:
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++out:
++ usb_put_hcd(hcd);
++ return ret;
++}
++
++static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(pdev);
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ usb_put_hcd(hcd);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
++
++static struct platform_driver ehci_hcd_bcm63xx_driver = {
++ .probe = ehci_hcd_bcm63xx_drv_probe,
++ .remove = __devexit_p(ehci_hcd_bcm63xx_drv_remove),
++ .shutdown = usb_hcd_platform_shutdown,
++ .driver = {
++ .name = "bcm63xx_ehci",
++ .owner = THIS_MODULE,
++ .bus = &platform_bus_type
++ },
++};
++
++MODULE_ALIAS("platform:bcm63xx_ehci");
+diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
+index 8409e07..3230ba3 100644
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1040,6 +1040,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ixp4xx_ehci_driver
+ #endif
+
++#ifdef CONFIG_BCM63XX
++#include "ehci-bcm63xx.c"
++#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+ #error "missing bus glue for ehci-hcd"
+diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
+index 5799298..71d0eca 100644
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -755,6 +755,11 @@ ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
+ #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
+ #endif
+
++#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX)
++#define readl_be(addr) __raw_readl((__force unsigned *)addr)
++#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
++#endif
++
+ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
+ __u32 __iomem * regs)
+ {
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+new file mode 100644
+index 0000000..17fb519
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_EHCI_H_
++#define BCM63XX_DEV_USB_EHCI_H_
++
++int bcm63xx_ehci_register(void);
++
++#endif /* BCM63XX_DEV_USB_EHCI_H_ */
+--
+1.5.4.3
+
--- /dev/null
+From 49aa7ffcd9bd2d9a0af99fced7b8511160dbf345 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Sun, 21 Sep 2008 03:43:26 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet mac support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-enet.c | 158 ++
+ drivers/net/Kconfig | 9 +
+ drivers/net/Makefile | 1 +
+ drivers/net/bcm63xx_enet.c | 1894 ++++++++++++++++++++++
+ drivers/net/bcm63xx_enet.h | 294 ++++
+ include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h | 45 +
+ 7 files changed, 2402 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-enet.c
+ create mode 100644 drivers/net/bcm63xx_enet.c
+ create mode 100644 drivers/net/bcm63xx_enet.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h
+
+diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
+index 99e335d..5358093 100644
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -3,4 +3,5 @@ obj-y += dev-uart.o
+ obj-y += dev-pcmcia.o
+ obj-y += dev-usb-ohci.o
+ obj-y += dev-usb-ehci.o
++obj-y += dev-enet.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
+new file mode 100644
+index 0000000..c6e472e
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -0,0 +1,158 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++
++static struct resource shared_res[] = {
++ {
++ .start = -1, /* filled at runtime */
++ .end = -1, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct platform_device bcm63xx_enet_shared_device = {
++ .name = "bcm63xx_enet_shared",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(shared_res),
++ .resource = shared_res,
++};
++
++static int shared_device_registered = 0;
++
++static struct resource enet0_res[] = {
++ {
++ .start = -1, /* filled at runtime */
++ .end = -1, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .start = IRQ_ENET0_RXDMA,
++ .flags = IORESOURCE_IRQ,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .start = IRQ_ENET0_TXDMA,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct bcm63xx_enet_platform_data enet0_pd;
++
++static struct platform_device bcm63xx_enet0_device = {
++ .name = "bcm63xx_enet",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(enet0_res),
++ .resource = enet0_res,
++ .dev = {
++ .platform_data = &enet0_pd,
++ },
++};
++
++static struct resource enet1_res[] = {
++ {
++ .start = -1, /* filled at runtime */
++ .end = -1, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct bcm63xx_enet_platform_data enet1_pd;
++
++static struct platform_device bcm63xx_enet1_device = {
++ .name = "bcm63xx_enet",
++ .id = 1,
++ .num_resources = ARRAY_SIZE(enet1_res),
++ .resource = enet1_res,
++ .dev = {
++ .platform_data = &enet1_pd,
++ },
++};
++
++int __init bcm63xx_enet_register(int unit,
++ const struct bcm63xx_enet_platform_data *pd)
++{
++ struct platform_device *pdev;
++ struct bcm63xx_enet_platform_data *dpd;
++ int ret;
++
++ if (unit > 1)
++ return -ENODEV;
++
++ if (!shared_device_registered) {
++ shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
++ shared_res[0].end = shared_res[0].start;
++ shared_res[0].end += RSET_ENETDMA_SIZE - 1;
++
++ ret = platform_device_register(&bcm63xx_enet_shared_device);
++ if (ret)
++ return ret;
++ shared_device_registered = 1;
++ }
++
++ if (unit == 0) {
++ enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0);
++ enet0_res[0].end = enet0_res[0].start;
++ enet0_res[0].end += RSET_ENET_SIZE - 1;
++ enet0_res[1].start = bcm63xx_get_irq_number(IRQ_ENET0);
++ enet0_res[2].start = bcm63xx_get_irq_number(IRQ_ENET0_RXDMA);
++ enet0_res[3].start = bcm63xx_get_irq_number(IRQ_ENET0_TXDMA);
++ pdev = &bcm63xx_enet0_device;
++ } else {
++ enet1_res[0].start = bcm63xx_regset_address(RSET_ENET1);
++ enet1_res[0].end = enet1_res[0].start;
++ enet1_res[0].end += RSET_ENET_SIZE - 1;
++ enet1_res[1].start = bcm63xx_get_irq_number(IRQ_ENET1);
++ enet1_res[2].start = bcm63xx_get_irq_number(IRQ_ENET1_RXDMA);
++ enet1_res[3].start = bcm63xx_get_irq_number(IRQ_ENET1_TXDMA);
++ pdev = &bcm63xx_enet1_device;
++ }
++
++ /* copy given platform data */
++ dpd = pdev->dev.platform_data;
++ memcpy(dpd, pd, sizeof (*pd));
++
++ /* adjust them in case internal phy is used */
++ if (dpd->use_internal_phy) {
++
++ /* internal phy only exists for enet0 */
++ if (unit == 1)
++ return -ENODEV;
++
++ dpd->phy_id = 1;
++ dpd->has_phy_interrupt = 1;
++ dpd->phy_interrupt = bcm63xx_get_irq_number(IRQ_ENET_PHY);
++ }
++
++ ret = platform_device_register(pdev);
++ if (ret)
++ return ret;
++ return 0;
++}
+diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
+index bbd0e67..01f7e5a 100644
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -1840,6 +1840,15 @@ config NE_H8300
+ Say Y here if you want to use the NE2000 compatible
+ controller on the Renesas H8/300 processor.
+
++config BCM63XX_ENET
++ tristate "Broadcom 63xx internal mac support"
++ depends on BCM63XX
++ select MII
++ select PHYLIB
++ help
++ This driver supports the ethernet MACs in the Broadcom 63xx
++ MIPS chipset family (BCM63XX).
++
+ source "drivers/net/fs_enet/Kconfig"
+
+ endif # NET_ETHERNET
+diff --git a/drivers/net/Makefile b/drivers/net/Makefile
+index 284ed83..ab22f32 100644
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -123,6 +123,7 @@ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
+ obj-$(CONFIG_B44) += b44.o
+ obj-$(CONFIG_FORCEDETH) += forcedeth.o
+ obj-$(CONFIG_NE_H8300) += ne-h8300.o
++obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
+ obj-$(CONFIG_AX88796) += ax88796.o
+
+ obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
+diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
+new file mode 100644
+index 0000000..40c2565
+--- /dev/null
++++ b/drivers/net/bcm63xx_enet.c
+@@ -0,0 +1,1894 @@
++/*
++ * Driver for BCM963xx builtin Ethernet mac
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/etherdevice.h>
++#include <linux/delay.h>
++#include <linux/ethtool.h>
++#include <linux/crc32.h>
++#include <linux/err.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++
++#include <bcm63xx_dev_enet.h>
++#include "bcm63xx_enet.h"
++
++static char bcm_enet_driver_name[] = "bcm63xx_enet";
++static char bcm_enet_driver_version[] = "1.0";
++
++static int copybreak __read_mostly = 128;
++module_param(copybreak, int, 0);
++MODULE_PARM_DESC(copybreak, "Receive copy threshold");
++
++/* io memory shared between all devices */
++static void __iomem *bcm_enet_shared_base;
++
++/*
++ * io helpers to access mac registers
++ */
++static inline u32 enet_readl(struct bcm_enet_priv *priv, u32 off)
++{
++ return bcm_readl(priv->base + off);
++}
++
++static inline void enet_writel(struct bcm_enet_priv *priv,
++ u32 val, u32 off)
++{
++ bcm_writel(val, priv->base + off);
++}
++
++/*
++ * io helpers to access shared registers
++ */
++static inline u32 enet_dma_readl(struct bcm_enet_priv *priv, u32 off)
++{
++ return bcm_readl(bcm_enet_shared_base + off);
++}
++
++static inline void enet_dma_writel(struct bcm_enet_priv *priv,
++ u32 val, u32 off)
++{
++ bcm_writel(val, bcm_enet_shared_base + off);
++}
++
++/*
++ * write given data into mii register and wait for transfer to end
++ * with timeout (average measured transfer time is 25us)
++ */
++static int do_mdio_op(struct bcm_enet_priv *priv, unsigned int data)
++{
++ int limit;
++
++ /* make sure mii interrupt status is cleared */
++ enet_writel(priv, ENET_IR_MII, ENET_IR_REG);
++
++ enet_writel(priv, data, ENET_MIIDATA_REG);
++ wmb();
++
++ /* busy wait on mii interrupt bit, with timeout */
++ limit = 1000;
++ do {
++ if (enet_readl(priv, ENET_IR_REG) & ENET_IR_MII)
++ break;
++ udelay(1);
++ } while (limit-- >= 0);
++
++ return (limit < 0) ? 1 : 0;
++}
++
++/*
++ * MII internal read callback
++ */
++static int bcm_enet_mdio_read(struct bcm_enet_priv *priv, int mii_id,
++ int regnum)
++{
++ u32 tmp, val;
++
++ tmp = regnum << ENET_MIIDATA_REG_SHIFT;
++ tmp |= 0x2 << ENET_MIIDATA_TA_SHIFT;
++ tmp |= mii_id << ENET_MIIDATA_PHYID_SHIFT;
++ tmp |= ENET_MIIDATA_OP_READ_MASK;
++
++ if (do_mdio_op(priv, tmp))
++ return -1;
++
++ val = enet_readl(priv, ENET_MIIDATA_REG);
++ val &= 0xffff;
++ return val;
++}
++
++/*
++ * MII internal write callback
++ */
++static int bcm_enet_mdio_write(struct bcm_enet_priv *priv, int mii_id,
++ int regnum, u16 value)
++{
++ u32 tmp;
++
++ tmp = (value & 0xffff) << ENET_MIIDATA_DATA_SHIFT;
++ tmp |= 0x2 << ENET_MIIDATA_TA_SHIFT;
++ tmp |= regnum << ENET_MIIDATA_REG_SHIFT;
++ tmp |= mii_id << ENET_MIIDATA_PHYID_SHIFT;
++ tmp |= ENET_MIIDATA_OP_WRITE_MASK;
++
++ (void)do_mdio_op(priv, tmp);
++ return 0;
++}
++
++/*
++ * MII read callback from phylib
++ */
++static int bcm_enet_mdio_read_phylib(struct mii_bus *bus, int mii_id,
++ int regnum)
++{
++ return bcm_enet_mdio_read(bus->priv, mii_id, regnum);
++}
++
++/*
++ * MII write callback from phylib
++ */
++static int bcm_enet_mdio_write_phylib(struct mii_bus *bus, int mii_id,
++ int regnum, u16 value)
++{
++ return bcm_enet_mdio_write(bus->priv, mii_id, regnum, value);
++}
++
++/*
++ * MII read callback from mii core
++ */
++static int bcm_enet_mdio_read_mii(struct net_device *dev, int mii_id,
++ int regnum)
++{
++ return bcm_enet_mdio_read(netdev_priv(dev), mii_id, regnum);
++}
++
++/*
++ * MII write callback from mii core
++ */
++static void bcm_enet_mdio_write_mii(struct net_device *dev, int mii_id,
++ int regnum, int value)
++{
++ bcm_enet_mdio_write(netdev_priv(dev), mii_id, regnum, value);
++}
++
++/*
++ * refill rx queue
++ */
++static int bcm_enet_refill_rx(struct net_device *dev)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = netdev_priv(dev);
++
++ while (priv->rx_desc_count < priv->rx_ring_size) {
++ struct bcm_enet_desc *desc;
++ struct sk_buff *skb;
++ dma_addr_t p;
++ int desc_idx;
++ u32 len_stat;
++
++ desc_idx = priv->rx_dirty_desc;
++ desc = &priv->rx_desc_cpu[desc_idx];
++
++ if (!priv->rx_skb[desc_idx]) {
++ skb = netdev_alloc_skb(dev, BCMENET_MAX_RX_SIZE);
++ if (!skb)
++ break;
++ priv->rx_skb[desc_idx] = skb;
++
++ p = dma_map_single(&priv->pdev->dev, skb->data,
++ BCMENET_MAX_RX_SIZE,
++ DMA_FROM_DEVICE);
++ desc->address = p;
++ }
++
++ len_stat = BCMENET_MAX_RX_SIZE << DMADESC_LENGTH_SHIFT;
++ len_stat |= DMADESC_OWNER_MASK;
++ if (priv->rx_dirty_desc == priv->rx_ring_size - 1) {
++ len_stat |= DMADESC_WRAP_MASK;
++ priv->rx_dirty_desc = 0;
++ } else {
++ priv->rx_dirty_desc++;
++ }
++ wmb();
++ desc->len_stat = len_stat;
++
++ priv->rx_desc_count++;
++
++ /* tell dma engine we allocated one buffer */
++ enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
++ }
++
++ /* If rx ring is still empty, set a timer to try allocating
++ * again at a later time. */
++ if (priv->rx_desc_count == 0 && netif_running(dev)) {
++ dev_warn(&priv->pdev->dev, "unable to refill rx ring\n");
++ priv->rx_timeout.expires = jiffies + HZ;
++ add_timer(&priv->rx_timeout);
++ }
++
++ return 0;
++}
++
++/*
++ * timer callback to defer refill rx queue in case we're OOM
++ */
++static void bcm_enet_refill_rx_timer(unsigned long data)
++{
++ struct net_device *dev;
++ struct bcm_enet_priv *priv;
++
++ dev = (struct net_device *)data;
++ priv = netdev_priv(dev);
++
++ spin_lock(&priv->rx_lock);
++ bcm_enet_refill_rx((struct net_device *)data);
++ spin_unlock(&priv->rx_lock);
++}
++
++/*
++ * extract packet from rx queue
++ */
++static int bcm_enet_receive_queue(struct net_device *dev, int budget)
++{
++ struct bcm_enet_priv *priv;
++ struct device *kdev;
++ int processed;
++
++ priv = netdev_priv(dev);
++ kdev = &priv->pdev->dev;
++ processed = 0;
++
++ /* don't scan ring further than number of refilled
++ * descriptor */
++ if (budget > priv->rx_desc_count)
++ budget = priv->rx_desc_count;
++
++ do {
++ struct bcm_enet_desc *desc;
++ struct sk_buff *skb;
++ int desc_idx;
++ u32 len_stat;
++ unsigned int len;
++
++ desc_idx = priv->rx_curr_desc;
++ desc = &priv->rx_desc_cpu[desc_idx];
++
++ /* make sure we actually read the descriptor status at
++ * each loop */
++ rmb();
++
++ len_stat = desc->len_stat;
++
++ /* break if dma ownership belongs to hw */
++ if (len_stat & DMADESC_OWNER_MASK)
++ break;
++
++ processed++;
++ priv->rx_curr_desc++;
++ if (priv->rx_curr_desc == priv->rx_ring_size)
++ priv->rx_curr_desc = 0;
++ priv->rx_desc_count--;
++
++ /* if the packet does not have start of packet _and_
++ * end of packet flag set, then just recycle it */
++ if ((len_stat & DMADESC_ESOP_MASK) != DMADESC_ESOP_MASK) {
++ priv->stats.rx_dropped++;
++ continue;
++ }
++
++ /* recycle packet if it's marked as bad */
++ if (unlikely(len_stat & DMADESC_ERR_MASK)) {
++ priv->stats.rx_errors++;
++
++ if (len_stat & DMADESC_OVSIZE_MASK)
++ priv->stats.rx_length_errors++;
++ if (len_stat & DMADESC_CRC_MASK)
++ priv->stats.rx_crc_errors++;
++ if (len_stat & DMADESC_UNDER_MASK)
++ priv->stats.rx_frame_errors++;
++ if (len_stat & DMADESC_OV_MASK)
++ priv->stats.rx_fifo_errors++;
++ continue;
++ }
++
++ /* valid packet */
++ skb = priv->rx_skb[desc_idx];
++ len = (len_stat & DMADESC_LENGTH_MASK) >> DMADESC_LENGTH_SHIFT;
++ /* don't include FCS */
++ len -= 4;
++
++ if (len < copybreak) {
++ struct sk_buff *nskb;
++
++ nskb = netdev_alloc_skb(dev, len + 2);
++ if (!nskb) {
++ /* forget packet, just rearm desc */
++ priv->stats.rx_dropped++;
++ continue;
++ }
++
++ /* since we're copying the data, we can align
++ * them properly */
++ skb_reserve(nskb, NET_IP_ALIGN);
++ dma_sync_single_for_cpu(kdev, desc->address,
++ len, DMA_FROM_DEVICE);
++ memcpy(nskb->data, skb->data, len);
++ dma_sync_single_for_device(kdev, desc->address,
++ len, DMA_FROM_DEVICE);
++ skb = nskb;
++ } else {
++ dma_unmap_single(&priv->pdev->dev, desc->address,
++ BCMENET_MAX_RX_SIZE, DMA_FROM_DEVICE);
++ priv->rx_skb[desc_idx] = NULL;
++ }
++
++ skb_put(skb, len);
++ skb->dev = dev;
++ skb->protocol = eth_type_trans(skb, dev);
++ priv->stats.rx_packets++;
++ priv->stats.rx_bytes += len;
++ dev->last_rx = jiffies;
++ netif_receive_skb(skb);
++
++ } while (--budget > 0);
++
++ if (processed || !priv->rx_desc_count) {
++ bcm_enet_refill_rx(dev);
++
++ /* kick rx dma */
++ enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
++ ENETDMA_CHANCFG_REG(priv->rx_chan));
++ }
++
++ return processed;
++}
++
++
++/*
++ * try to or force reclaim of transmitted buffers
++ */
++static int bcm_enet_tx_reclaim(struct net_device *dev, int force)
++{
++ struct bcm_enet_priv *priv;
++ int released;
++
++ priv = netdev_priv(dev);
++ released = 0;
++
++ while (priv->tx_desc_count < priv->tx_ring_size) {
++ struct bcm_enet_desc *desc;
++ struct sk_buff *skb;
++
++ /* We run in a bh and fight against start_xmit, which
++ * is called with bh disabled */
++ spin_lock(&priv->tx_lock);
++
++ desc = &priv->tx_desc_cpu[priv->tx_dirty_desc];
++
++ if (!force && (desc->len_stat & DMADESC_OWNER_MASK)) {
++ spin_unlock(&priv->tx_lock);
++ break;
++ }
++
++ /* ensure other field of the descriptor were not read
++ * before we checked ownership */
++ rmb();
++
++ skb = priv->tx_skb[priv->tx_dirty_desc];
++ priv->tx_skb[priv->tx_dirty_desc] = NULL;
++ dma_unmap_single(&priv->pdev->dev, desc->address, skb->len,
++ DMA_TO_DEVICE);
++
++ priv->tx_dirty_desc++;
++ if (priv->tx_dirty_desc == priv->tx_ring_size)
++ priv->tx_dirty_desc = 0;
++ priv->tx_desc_count++;
++
++ spin_unlock(&priv->tx_lock);
++
++ if (desc->len_stat & DMADESC_UNDER_MASK)
++ priv->stats.tx_errors++;
++
++ dev_kfree_skb(skb);
++ released++;
++ }
++
++ if (netif_queue_stopped(dev) && released)
++ netif_wake_queue(dev);
++
++ return released;
++}
++
++/*
++ * poll func, called by network core
++ */
++static int bcm_enet_poll(struct napi_struct *napi, int budget)
++{
++ struct bcm_enet_priv *priv;
++ struct net_device *dev;
++ int tx_work_done, rx_work_done;
++
++ priv = container_of(napi, struct bcm_enet_priv, napi);
++ dev = priv->net_dev;
++
++ /* ack interrupts */
++ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++ ENETDMA_IR_REG(priv->rx_chan));
++ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++ ENETDMA_IR_REG(priv->tx_chan));
++
++ /* reclaim sent skb */
++ tx_work_done = bcm_enet_tx_reclaim(dev, 0);
++
++ spin_lock(&priv->rx_lock);
++ rx_work_done = bcm_enet_receive_queue(dev, budget);
++ spin_unlock(&priv->rx_lock);
++
++ if (rx_work_done >= budget || tx_work_done > 0) {
++ /* rx/tx queue is not yet empty/clean */
++ return rx_work_done;
++ }
++
++ /* no more packet in rx/tx queue, remove device from poll
++ * queue */
++ __netif_rx_complete(dev, napi);
++
++ /* restore rx/tx interrupt */
++ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++ ENETDMA_IRMASK_REG(priv->rx_chan));
++ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++ ENETDMA_IRMASK_REG(priv->tx_chan));
++
++ return rx_work_done;
++}
++
++/*
++ * mac interrupt handler
++ */
++static irqreturn_t bcm_enet_isr_mac(int irq, void *dev_id)
++{
++ struct net_device *dev;
++ struct bcm_enet_priv *priv;
++ u32 stat;
++
++ dev = dev_id;
++ priv = netdev_priv(dev);
++
++ stat = enet_readl(priv, ENET_IR_REG);
++ if (!(stat & ENET_IR_MIB))
++ return IRQ_NONE;
++
++ /* clear & mask interrupt */
++ enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
++ enet_writel(priv, 0, ENET_IRMASK_REG);
++
++ /* read mib registers in workqueue */
++ schedule_work(&priv->mib_update_task);
++
++ return IRQ_HANDLED;
++}
++
++/*
++ * rx/tx dma interrupt handler
++ */
++static irqreturn_t bcm_enet_isr_dma(int irq, void *dev_id)
++{
++ struct net_device *dev;
++ struct bcm_enet_priv *priv;
++
++ dev = dev_id;
++ priv = netdev_priv(dev);
++
++ /* mask rx/tx interrupts */
++ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
++ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
++
++ netif_rx_schedule(dev, &priv->napi);
++
++ return IRQ_HANDLED;
++}
++
++/*
++ * tx request callback
++ */
++static int bcm_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct bcm_enet_priv *priv;
++ struct bcm_enet_desc *desc;
++ u32 len_stat;
++ int ret;
++
++ priv = netdev_priv(dev);
++
++ /* lock against tx reclaim */
++ spin_lock(&priv->tx_lock);
++
++ /* make sure the tx hw queue is not full, should not happen
++ * since we stop queue before it's the case */
++ if (unlikely(!priv->tx_desc_count)) {
++ netif_stop_queue(dev);
++ dev_err(&priv->pdev->dev, "xmit called with no tx desc "
++ "available?\n");
++ ret = NETDEV_TX_BUSY;
++ goto out_unlock;
++ }
++
++ /* point to the next available desc */
++ desc = &priv->tx_desc_cpu[priv->tx_curr_desc];
++ priv->tx_skb[priv->tx_curr_desc] = skb;
++
++ /* fill descriptor */
++ desc->address = dma_map_single(&priv->pdev->dev, skb->data, skb->len,
++ DMA_TO_DEVICE);
++
++ len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK;
++ len_stat |= DMADESC_ESOP_MASK |
++ DMADESC_APPEND_CRC |
++ DMADESC_OWNER_MASK;
++
++ priv->tx_curr_desc++;
++ if (priv->tx_curr_desc == priv->tx_ring_size) {
++ priv->tx_curr_desc = 0;
++ len_stat |= DMADESC_WRAP_MASK;
++ }
++ priv->tx_desc_count--;
++
++ /* dma might be already polling, make sure we update desc
++ * fields in correct order */
++ wmb();
++ desc->len_stat = len_stat;
++ wmb();
++
++ /* kick tx dma */
++ enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
++ ENETDMA_CHANCFG_REG(priv->tx_chan));
++
++ /* stop queue if no more desc available */
++ if (!priv->tx_desc_count)
++ netif_stop_queue(dev);
++
++ priv->stats.tx_bytes += skb->len;
++ priv->stats.tx_packets++;
++ dev->trans_start = jiffies;
++ ret = NETDEV_TX_OK;
++
++out_unlock:
++ spin_unlock(&priv->tx_lock);
++ return ret;
++}
++
++/*
++ * Change the interface's mac address.
++ */
++static int bcm_enet_set_mac_address(struct net_device *dev, void *p)
++{
++ struct bcm_enet_priv *priv;
++ struct sockaddr *addr = p;
++ u32 val;
++
++ priv = netdev_priv(dev);
++ memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
++
++ /* use perfect match register 0 to store my mac address */
++ val = (dev->dev_addr[2] << 24) | (dev->dev_addr[3] << 16) |
++ (dev->dev_addr[4] << 8) | dev->dev_addr[5];
++ enet_writel(priv, val, ENET_PML_REG(0));
++
++ val = (dev->dev_addr[0] << 8 | dev->dev_addr[1]);
++ val |= ENET_PMH_DATAVALID_MASK;
++ enet_writel(priv, val, ENET_PMH_REG(0));
++
++ return 0;
++}
++
++/*
++ * Change rx mode (promiscous/allmulti) and update multicast list
++ */
++static void bcm_enet_set_multicast_list(struct net_device *dev)
++{
++ struct bcm_enet_priv *priv;
++ struct dev_mc_list *mc_list;
++ u32 val;
++ int i;
++
++ priv = netdev_priv(dev);
++
++ val = enet_readl(priv, ENET_RXCFG_REG);
++
++ if (dev->flags & IFF_PROMISC)
++ val |= ENET_RXCFG_PROMISC_MASK;
++ else
++ val &= ~ENET_RXCFG_PROMISC_MASK;
++
++ /* only 3 perfect match registers left, first one is used for
++ * own mac address */
++ if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 3)
++ val |= ENET_RXCFG_ALLMCAST_MASK;
++ else
++ val &= ~ENET_RXCFG_ALLMCAST_MASK;
++
++ /* no need to set perfect match registers if we catch all
++ * multicast */
++ if (val & ENET_RXCFG_ALLMCAST_MASK) {
++ enet_writel(priv, val, ENET_RXCFG_REG);
++ return;
++ }
++
++ for (i = 0, mc_list = dev->mc_list;
++ (mc_list != NULL) && (i < dev->mc_count) && (i < 3);
++ i++, mc_list = mc_list->next) {
++ u8 *dmi_addr;
++ u32 tmp;
++
++ /* filter non ethernet address */
++ if (mc_list->dmi_addrlen != 6)
++ continue;
++
++ /* update perfect match registers */
++ dmi_addr = mc_list->dmi_addr;
++ tmp = (dmi_addr[2] << 24) | (dmi_addr[3] << 16) |
++ (dmi_addr[4] << 8) | dmi_addr[5];
++ enet_writel(priv, tmp, ENET_PML_REG(i + 1));
++
++ tmp = (dmi_addr[0] << 8 | dmi_addr[1]);
++ tmp |= ENET_PMH_DATAVALID_MASK;
++ enet_writel(priv, tmp, ENET_PMH_REG(i + 1));
++ }
++
++ for (; i < 3; i++) {
++ enet_writel(priv, 0, ENET_PML_REG(i + 1));
++ enet_writel(priv, 0, ENET_PMH_REG(i + 1));
++ }
++
++ enet_writel(priv, val, ENET_RXCFG_REG);
++}
++
++/*
++ * set mac duplex parameters
++ */
++static void bcm_enet_set_duplex(struct bcm_enet_priv *priv, int fullduplex)
++{
++ u32 val;
++
++ val = enet_readl(priv, ENET_TXCTL_REG);
++ if (fullduplex)
++ val |= ENET_TXCTL_FD_MASK;
++ else
++ val &= ~ENET_TXCTL_FD_MASK;
++ enet_writel(priv, val, ENET_TXCTL_REG);
++}
++
++/*
++ * set mac flow control parameters
++ */
++static void bcm_enet_set_flow(struct bcm_enet_priv *priv, int rx_en, int tx_en)
++{
++ u32 val;
++
++ /* rx flow control (pause frame handling) */
++ val = enet_readl(priv, ENET_RXCFG_REG);
++ if (rx_en)
++ val |= ENET_RXCFG_ENFLOW_MASK;
++ else
++ val &= ~ENET_RXCFG_ENFLOW_MASK;
++ enet_writel(priv, val, ENET_RXCFG_REG);
++
++ /* tx flow control (pause frame generation) */
++ val = enet_dma_readl(priv, ENETDMA_CFG_REG);
++ if (tx_en)
++ val |= ENETDMA_CFG_FLOWCH_MASK(priv->rx_chan);
++ else
++ val &= ~ENETDMA_CFG_FLOWCH_MASK(priv->rx_chan);
++ enet_dma_writel(priv, val, ENETDMA_CFG_REG);
++}
++
++/*
++ * link changed callback (from phylib)
++ */
++static void bcm_enet_adjust_phy_link(struct net_device *dev)
++{
++ struct bcm_enet_priv *priv;
++ struct phy_device *phydev;
++ int status_changed;
++
++ priv = netdev_priv(dev);
++ phydev = priv->phydev;
++ status_changed = 0;
++
++ if (priv->old_link != phydev->link) {
++ status_changed = 1;
++ priv->old_link = phydev->link;
++ }
++
++ /* reflect duplex change in mac configuration */
++ if (phydev->link && phydev->duplex != priv->old_duplex) {
++ bcm_enet_set_duplex(priv,
++ (phydev->duplex == DUPLEX_FULL) ? 1 : 0);
++ status_changed = 1;
++ priv->old_duplex = phydev->duplex;
++ }
++
++ /* enable flow control if remote advertise it (trust phylib to
++ * check that duplex is full */
++ if (phydev->link && phydev->pause != priv->old_pause) {
++ int rx_pause_en, tx_pause_en;
++
++ if (phydev->pause) {
++ /* pause was advertised by lpa and us */
++ rx_pause_en = 1;
++ tx_pause_en = 1;
++ } else if (!priv->pause_auto) {
++ /* pause setting overrided by user */
++ rx_pause_en = priv->pause_rx;
++ tx_pause_en = priv->pause_tx;
++ } else {
++ rx_pause_en = 0;
++ tx_pause_en = 0;
++ }
++
++ bcm_enet_set_flow(priv, rx_pause_en, tx_pause_en);
++ status_changed = 1;
++ priv->old_pause = phydev->pause;
++ }
++
++ if (status_changed) {
++ pr_info("%s: link %s", dev->name, phydev->link ?
++ "UP" : "DOWN");
++ if (phydev->link)
++ printk(" - %d/%s - flow control %s", phydev->speed,
++ DUPLEX_FULL == phydev->duplex ? "full" : "half",
++ phydev->pause == 1 ? "rx&tx" : "off");
++
++ printk("\n");
++ }
++}
++
++/*
++ * link changed callback (if phylib is not used)
++ */
++static void bcm_enet_adjust_link(struct net_device *dev)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = netdev_priv(dev);
++ bcm_enet_set_duplex(priv, priv->force_duplex_full);
++ bcm_enet_set_flow(priv, priv->pause_rx, priv->pause_tx);
++
++ pr_info("%s: link forced UP - %d/%s - flow control %s/%s\n",
++ dev->name,
++ priv->force_speed_100 ? 100 : 10,
++ priv->force_duplex_full ? "full" : "half",
++ priv->pause_rx ? "rx" : "off",
++ priv->pause_tx ? "tx" : "off");
++}
++
++/*
++ * open callback, allocate dma rings & buffers and start rx operation
++ */
++static int bcm_enet_open(struct net_device *dev)
++{
++ struct bcm_enet_priv *priv;
++ struct sockaddr addr;
++ struct device *kdev;
++ struct phy_device *phydev;
++ int irq_requested, i, ret;
++ unsigned int size;
++ char phy_id[BUS_ID_SIZE];
++ void *p;
++ u32 val;
++
++ priv = netdev_priv(dev);
++ priv->rx_desc_cpu = priv->tx_desc_cpu = NULL;
++ priv->rx_skb = priv->tx_skb = NULL;
++
++ kdev = &priv->pdev->dev;
++
++ if (priv->has_phy) {
++ /* connect to PHY */
++ snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT,
++ priv->mac_id ? "1" : "0", priv->phy_id);
++
++ phydev = phy_connect(dev, phy_id, &bcm_enet_adjust_phy_link, 0,
++ PHY_INTERFACE_MODE_MII);
++
++ if (IS_ERR(phydev)) {
++ dev_err(kdev, "could not attach to PHY\n");
++ return PTR_ERR(phydev);
++ }
++
++ /* mask with MAC supported features */
++ phydev->supported &= (SUPPORTED_10baseT_Half |
++ SUPPORTED_10baseT_Full |
++ SUPPORTED_100baseT_Half |
++ SUPPORTED_100baseT_Full |
++ SUPPORTED_Autoneg |
++ SUPPORTED_Pause |
++ SUPPORTED_MII);
++ phydev->advertising = phydev->supported;
++
++ if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
++ phydev->advertising |= SUPPORTED_Pause;
++ else
++ phydev->advertising &= ~SUPPORTED_Pause;
++
++ dev_info(kdev, "attached PHY at address %d [%s]\n",
++ phydev->addr, phydev->drv->name);
++
++ priv->old_link = 0;
++ priv->old_duplex = -1;
++ priv->old_pause = -1;
++ priv->phydev = phydev;
++ }
++
++ /* mask all interrupts and request them */
++ enet_writel(priv, 0, ENET_IRMASK_REG);
++ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
++ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
++
++ irq_requested = 0;
++ ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
++ if (ret)
++ goto out;
++ irq_requested++;
++
++ ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
++ IRQF_SAMPLE_RANDOM | IRQF_DISABLED, dev->name, dev);
++ if (ret)
++ goto out;
++ irq_requested++;
++
++ ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
++ IRQF_DISABLED, dev->name, dev);
++ if (ret)
++ goto out;
++ irq_requested++;
++
++ /* initialize perfect match registers */
++ for (i = 0; i < 4; i++) {
++ enet_writel(priv, 0, ENET_PML_REG(i));
++ enet_writel(priv, 0, ENET_PMH_REG(i));
++ }
++
++ /* write device mac address */
++ memcpy(addr.sa_data, dev->dev_addr, ETH_ALEN);
++ bcm_enet_set_mac_address(dev, &addr);
++
++ /* allocate rx dma ring */
++ size = priv->rx_ring_size * sizeof(struct bcm_enet_desc);
++ p = dma_alloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL);
++ if (!p) {
++ dev_err(kdev, "cannot allocate rx ring %u\n", size);
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ memset(p, 0, size);
++ priv->rx_desc_alloc_size = size;
++ priv->rx_desc_cpu = p;
++
++ /* allocate tx dma ring */
++ size = priv->tx_ring_size * sizeof(struct bcm_enet_desc);
++ p = dma_alloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL);
++ if (!p) {
++ dev_err(kdev, "cannot allocate tx ring\n");
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ memset(p, 0, size);
++ priv->tx_desc_alloc_size = size;
++ priv->tx_desc_cpu = p;
++
++ priv->tx_skb = kzalloc(sizeof(struct sk_buff *) * priv->tx_ring_size,
++ GFP_KERNEL);
++ if (!priv->tx_skb) {
++ dev_err(kdev, "cannot allocate rx skb queue\n");
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ priv->tx_desc_count = priv->tx_ring_size;
++ priv->tx_dirty_desc = 0;
++ priv->tx_curr_desc = 0;
++ spin_lock_init(&priv->tx_lock);
++
++ /* init & fill rx ring with skbs */
++ priv->rx_skb = kzalloc(sizeof(struct sk_buff *) * priv->rx_ring_size,
++ GFP_KERNEL);
++ if (!priv->rx_skb) {
++ dev_err(kdev, "cannot allocate rx skb queue\n");
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ priv->rx_desc_count = 0;
++ priv->rx_dirty_desc = 0;
++ priv->rx_curr_desc = 0;
++
++ /* initialize flow control buffer allocation */
++ enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
++ ENETDMA_BUFALLOC_REG(priv->rx_chan));
++
++ if (bcm_enet_refill_rx(dev)) {
++ dev_err(kdev, "cannot allocate rx skb queue\n");
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ /* write rx & tx ring addresses */
++ enet_dma_writel(priv, priv->rx_desc_dma,
++ ENETDMA_RSTART_REG(priv->rx_chan));
++ enet_dma_writel(priv, priv->tx_desc_dma,
++ ENETDMA_RSTART_REG(priv->tx_chan));
++
++ /* clear remaining state ram for rx & tx channel */
++ enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
++ enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
++ enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
++ enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
++ enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
++ enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
++
++ /* set max rx/tx length */
++ enet_writel(priv, BCMENET_MAX_RX_SIZE, ENET_RXMAXLEN_REG);
++ enet_writel(priv, BCMENET_MAX_TX_SIZE, ENET_TXMAXLEN_REG);
++
++ /* set dma maximum burst len */
++ enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
++ ENETDMA_MAXBURST_REG(priv->rx_chan));
++ enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
++ ENETDMA_MAXBURST_REG(priv->tx_chan));
++
++ /* set correct transmit fifo watermark */
++ enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG);
++
++ /* set flow control low/high threshold to 1/3 / 2/3 */
++ val = priv->rx_ring_size / 3;
++ enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
++ val = (priv->rx_ring_size * 2) / 3;
++ enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
++
++ /* all set, enable mac and interrupts, start dma engine and
++ * kick rx dma channel */
++ wmb();
++ enet_writel(priv, ENET_CTL_ENABLE_MASK, ENET_CTL_REG);
++ enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
++ enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
++ ENETDMA_CHANCFG_REG(priv->rx_chan));
++
++ /* watch "mib counters about to overflow" interrupt */
++ enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
++ enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
++
++ /* watch "packet transferred" interrupt in rx and tx */
++ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++ ENETDMA_IR_REG(priv->rx_chan));
++ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++ ENETDMA_IR_REG(priv->tx_chan));
++
++ /* make sure we enable napi before rx interrupt */
++ napi_enable(&priv->napi);
++
++ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++ ENETDMA_IRMASK_REG(priv->rx_chan));
++ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++ ENETDMA_IRMASK_REG(priv->tx_chan));
++
++ if (priv->has_phy)
++ phy_start(priv->phydev);
++ else
++ bcm_enet_adjust_link(dev);
++
++ netif_start_queue(dev);
++ return 0;
++
++out:
++ phy_disconnect(priv->phydev);
++ if (irq_requested > 2)
++ free_irq(priv->irq_tx, dev);
++ if (irq_requested > 1)
++ free_irq(priv->irq_rx, dev);
++ if (irq_requested > 0)
++ free_irq(dev->irq, dev);
++ for (i = 0; i < priv->rx_ring_size; i++) {
++ struct bcm_enet_desc *desc;
++
++ if (!priv->rx_skb[i])
++ continue;
++
++ desc = &priv->rx_desc_cpu[i];
++ dma_unmap_single(kdev, desc->address, BCMENET_MAX_RX_SIZE,
++ DMA_FROM_DEVICE);
++ kfree_skb(priv->rx_skb[i]);
++ }
++ if (priv->rx_desc_cpu)
++ dma_free_coherent(kdev, priv->rx_desc_alloc_size,
++ priv->rx_desc_cpu, priv->rx_desc_dma);
++ if (priv->tx_desc_cpu)
++ dma_free_coherent(kdev, priv->tx_desc_alloc_size,
++ priv->tx_desc_cpu, priv->tx_desc_dma);
++ kfree(priv->rx_skb);
++ kfree(priv->tx_skb);
++ return ret;
++}
++
++/*
++ * disable mac
++ */
++static void bcm_enet_disable_mac(struct bcm_enet_priv *priv)
++{
++ int limit;
++ u32 val;
++
++ val = enet_readl(priv, ENET_CTL_REG);
++ val |= ENET_CTL_DISABLE_MASK;
++ enet_writel(priv, val, ENET_CTL_REG);
++
++ limit = 1000;
++ do {
++ u32 val;
++
++ val = enet_readl(priv, ENET_CTL_REG);
++ if (!(val & ENET_CTL_DISABLE_MASK))
++ break;
++ udelay(1);
++ } while (limit--);
++}
++
++/*
++ * disable dma in given channel
++ */
++static void bcm_enet_disable_dma(struct bcm_enet_priv *priv, int chan)
++{
++ int limit;
++
++ enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
++
++ limit = 1000;
++ do {
++ u32 val;
++
++ val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
++ if (!(val & ENETDMA_CHANCFG_EN_MASK))
++ break;
++ udelay(1);
++ } while (limit--);
++}
++
++/*
++ * stop callback
++ */
++static int bcm_enet_stop(struct net_device *dev)
++{
++ struct bcm_enet_priv *priv;
++ struct device *kdev;
++ int i;
++
++ priv = netdev_priv(dev);
++ kdev = &priv->pdev->dev;
++
++ netif_stop_queue(dev);
++ napi_disable(&priv->napi);
++ if (priv->has_phy)
++ phy_stop(priv->phydev);
++ del_timer_sync(&priv->rx_timeout);
++
++ /* mask all interrupts */
++ enet_writel(priv, 0, ENET_IRMASK_REG);
++ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
++ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
++
++ /* make sure no mib update is scheduled */
++ flush_scheduled_work();
++
++ /* disable dma & mac */
++ bcm_enet_disable_dma(priv, priv->tx_chan);
++ bcm_enet_disable_dma(priv, priv->rx_chan);
++ bcm_enet_disable_mac(priv);
++
++ /* force reclaim of all tx buffers */
++ bcm_enet_tx_reclaim(dev, 1);
++
++ /* free the rx skb ring */
++ for (i = 0; i < priv->rx_ring_size; i++) {
++ struct bcm_enet_desc *desc;
++
++ if (!priv->rx_skb[i])
++ continue;
++
++ desc = &priv->rx_desc_cpu[i];
++ dma_unmap_single(kdev, desc->address, BCMENET_MAX_RX_SIZE,
++ DMA_FROM_DEVICE);
++ kfree_skb(priv->rx_skb[i]);
++ }
++
++ /* free remaining allocated memory */
++ kfree(priv->rx_skb);
++ kfree(priv->tx_skb);
++ dma_free_coherent(kdev, priv->rx_desc_alloc_size,
++ priv->rx_desc_cpu, priv->rx_desc_dma);
++ dma_free_coherent(kdev, priv->tx_desc_alloc_size,
++ priv->tx_desc_cpu, priv->tx_desc_dma);
++ free_irq(priv->irq_tx, dev);
++ free_irq(priv->irq_rx, dev);
++ free_irq(dev->irq, dev);
++
++ /* release phy */
++ if (priv->has_phy) {
++ phy_disconnect(priv->phydev);
++ priv->phydev = NULL;
++ }
++
++ return 0;
++}
++
++/*
++ * core request to return device rx/tx stats
++ */
++static struct net_device_stats *bcm_enet_get_stats(struct net_device *dev)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = netdev_priv(dev);
++ return &priv->stats;
++}
++
++/*
++ * ethtool callbacks
++ */
++struct bcm_enet_stats {
++ char stat_string[ETH_GSTRING_LEN];
++ int sizeof_stat;
++ int stat_offset;
++ int mib_reg;
++};
++
++#define GEN_STAT(m) sizeof(((struct bcm_enet_priv *)0)->m), \
++ offsetof(struct bcm_enet_priv, m)
++
++static const struct bcm_enet_stats bcm_enet_gstrings_stats[] = {
++ { "rx_packets", GEN_STAT(stats.rx_packets), -1 },
++ { "tx_packets", GEN_STAT(stats.tx_packets), -1 },
++ { "rx_bytes", GEN_STAT(stats.rx_bytes), -1 },
++ { "tx_bytes", GEN_STAT(stats.tx_bytes), -1 },
++ { "rx_errors", GEN_STAT(stats.rx_errors), -1 },
++ { "tx_errors", GEN_STAT(stats.tx_errors), -1 },
++ { "rx_dropped", GEN_STAT(stats.rx_dropped), -1 },
++ { "tx_dropped", GEN_STAT(stats.tx_dropped), -1 },
++
++ { "rx_good_octets", GEN_STAT(mib.rx_gd_octets), ETH_MIB_RX_GD_OCTETS},
++ { "rx_good_pkts", GEN_STAT(mib.rx_gd_pkts), ETH_MIB_RX_GD_PKTS },
++ { "rx_broadcast", GEN_STAT(mib.rx_brdcast), ETH_MIB_RX_BRDCAST },
++ { "rx_multicast", GEN_STAT(mib.rx_mult), ETH_MIB_RX_MULT },
++ { "rx_64_octets", GEN_STAT(mib.rx_64), ETH_MIB_RX_64 },
++ { "rx_65_127_oct", GEN_STAT(mib.rx_65_127), ETH_MIB_RX_65_127 },
++ { "rx_128_255_oct", GEN_STAT(mib.rx_128_255), ETH_MIB_RX_128_255 },
++ { "rx_256_511_oct", GEN_STAT(mib.rx_256_511), ETH_MIB_RX_256_511 },
++ { "rx_512_1023_oct", GEN_STAT(mib.rx_512_1023), ETH_MIB_RX_512_1023 },
++ { "rx_1024_max_oct", GEN_STAT(mib.rx_1024_max), ETH_MIB_RX_1024_MAX },
++ { "rx_jabber", GEN_STAT(mib.rx_jab), ETH_MIB_RX_JAB },
++ { "rx_oversize", GEN_STAT(mib.rx_ovr), ETH_MIB_RX_OVR },
++ { "rx_fragment", GEN_STAT(mib.rx_frag), ETH_MIB_RX_FRAG },
++ { "rx_dropped", GEN_STAT(mib.rx_drop), ETH_MIB_RX_DROP },
++ { "rx_crc_align", GEN_STAT(mib.rx_crc_align), ETH_MIB_RX_CRC_ALIGN },
++ { "rx_undersize", GEN_STAT(mib.rx_und), ETH_MIB_RX_UND },
++ { "rx_crc", GEN_STAT(mib.rx_crc), ETH_MIB_RX_CRC },
++ { "rx_align", GEN_STAT(mib.rx_align), ETH_MIB_RX_ALIGN },
++ { "rx_symbol_error", GEN_STAT(mib.rx_sym), ETH_MIB_RX_SYM },
++ { "rx_pause", GEN_STAT(mib.rx_pause), ETH_MIB_RX_PAUSE },
++ { "rx_control", GEN_STAT(mib.rx_cntrl), ETH_MIB_RX_CNTRL },
++
++ { "tx_good_octets", GEN_STAT(mib.tx_gd_octets), ETH_MIB_TX_GD_OCTETS },
++ { "tx_good_pkts", GEN_STAT(mib.tx_gd_pkts), ETH_MIB_TX_GD_PKTS },
++ { "tx_broadcast", GEN_STAT(mib.tx_brdcast), ETH_MIB_TX_BRDCAST },
++ { "tx_multicast", GEN_STAT(mib.tx_mult), ETH_MIB_TX_MULT },
++ { "tx_64_oct", GEN_STAT(mib.tx_64), ETH_MIB_TX_64 },
++ { "tx_65_127_oct", GEN_STAT(mib.tx_65_127), ETH_MIB_TX_65_127 },
++ { "tx_128_255_oct", GEN_STAT(mib.tx_128_255), ETH_MIB_TX_128_255 },
++ { "tx_256_511_oct", GEN_STAT(mib.tx_256_511), ETH_MIB_TX_256_511 },
++ { "tx_512_1023_oct", GEN_STAT(mib.tx_512_1023), ETH_MIB_TX_512_1023},
++ { "tx_1024_max_oct", GEN_STAT(mib.tx_1024_max), ETH_MIB_TX_1024_MAX },
++ { "tx_jabber", GEN_STAT(mib.tx_jab), ETH_MIB_TX_JAB },
++ { "tx_oversize", GEN_STAT(mib.tx_ovr), ETH_MIB_TX_OVR },
++ { "tx_fragment", GEN_STAT(mib.tx_frag), ETH_MIB_TX_FRAG },
++ { "tx_underrun", GEN_STAT(mib.tx_underrun), ETH_MIB_TX_UNDERRUN },
++ { "tx_collisions", GEN_STAT(mib.tx_col), ETH_MIB_TX_COL },
++ { "tx_single_collision", GEN_STAT(mib.tx_1_col), ETH_MIB_TX_1_COL },
++ { "tx_multiple_collision", GEN_STAT(mib.tx_m_col), ETH_MIB_TX_M_COL },
++ { "tx_excess_collision", GEN_STAT(mib.tx_ex_col), ETH_MIB_TX_EX_COL },
++ { "tx_late_collision", GEN_STAT(mib.tx_late), ETH_MIB_TX_LATE },
++ { "tx_deferred", GEN_STAT(mib.tx_def), ETH_MIB_TX_DEF },
++ { "tx_carrier_sense", GEN_STAT(mib.tx_crs), ETH_MIB_TX_CRS },
++ { "tx_pause", GEN_STAT(mib.tx_pause), ETH_MIB_TX_PAUSE },
++
++};
++
++#define BCM_ENET_STATS_LEN \
++ (sizeof(bcm_enet_gstrings_stats) / sizeof(struct bcm_enet_stats))
++
++static const u32 unused_mib_regs[] = {
++ ETH_MIB_TX_ALL_OCTETS,
++ ETH_MIB_TX_ALL_PKTS,
++ ETH_MIB_RX_ALL_OCTETS,
++ ETH_MIB_RX_ALL_PKTS,
++};
++
++
++static void bcm_enet_get_drvinfo(struct net_device *netdev,
++ struct ethtool_drvinfo *drvinfo)
++{
++ strncpy(drvinfo->driver, bcm_enet_driver_name, 32);
++ strncpy(drvinfo->version, bcm_enet_driver_version, 32);
++ strncpy(drvinfo->fw_version, "N/A", 32);
++ strncpy(drvinfo->bus_info, "bcm63xx", 32);
++ drvinfo->n_stats = BCM_ENET_STATS_LEN;
++}
++
++static int bcm_enet_get_stats_count(struct net_device *netdev)
++{
++ return BCM_ENET_STATS_LEN;
++}
++
++static void bcm_enet_get_strings(struct net_device *netdev,
++ u32 stringset, u8 *data)
++{
++ int i;
++
++ switch (stringset) {
++ case ETH_SS_STATS:
++ for (i = 0; i < BCM_ENET_STATS_LEN; i++) {
++ memcpy(data + i * ETH_GSTRING_LEN,
++ bcm_enet_gstrings_stats[i].stat_string,
++ ETH_GSTRING_LEN);
++ }
++ break;
++ }
++}
++
++static void update_mib_counters(struct bcm_enet_priv *priv)
++{
++ int i;
++
++ for (i = 0; i < BCM_ENET_STATS_LEN; i++) {
++ const struct bcm_enet_stats *s;
++ u32 val;
++ char *p;
++
++ s = &bcm_enet_gstrings_stats[i];
++ if (s->mib_reg == -1)
++ continue;
++
++ val = enet_readl(priv, ENET_MIB_REG(s->mib_reg));
++ p = (char *)priv + s->stat_offset;
++
++ if (s->sizeof_stat == sizeof(u64))
++ *(u64 *)p += val;
++ else
++ *(u32 *)p += val;
++ }
++
++ /* also empty unused mib counters to make sure mib counter
++ * overflow interrupt is cleared */
++ for (i = 0; i < ARRAY_SIZE(unused_mib_regs); i++)
++ (void)enet_readl(priv, ENET_MIB_REG(unused_mib_regs[i]));
++}
++
++static void bcm_enet_update_mib_counters_defer(struct work_struct *t)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = container_of(t, struct bcm_enet_priv, mib_update_task);
++ mutex_lock(&priv->mib_update_lock);
++ update_mib_counters(priv);
++ mutex_unlock(&priv->mib_update_lock);
++
++ /* reenable mib interrupt */
++ if (netif_running(priv->net_dev))
++ enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
++}
++
++static void bcm_enet_get_ethtool_stats(struct net_device *netdev,
++ struct ethtool_stats *stats,
++ u64 *data)
++{
++ struct bcm_enet_priv *priv;
++ int i;
++
++ priv = netdev_priv(netdev);
++
++ mutex_lock(&priv->mib_update_lock);
++ update_mib_counters(priv);
++
++ for (i = 0; i < BCM_ENET_STATS_LEN; i++) {
++ const struct bcm_enet_stats *s;
++ char *p;
++
++ s = &bcm_enet_gstrings_stats[i];
++ p = (char *)priv + s->stat_offset;
++ data[i] = (s->sizeof_stat == sizeof(u64)) ?
++ *(u64 *)p : *(u32 *)p;
++ }
++ mutex_unlock(&priv->mib_update_lock);
++}
++
++static int bcm_enet_get_settings(struct net_device *dev,
++ struct ethtool_cmd *cmd)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = netdev_priv(dev);
++
++ cmd->maxrxpkt = 0;
++ cmd->maxtxpkt = 0;
++
++ if (priv->has_phy) {
++ if (!priv->phydev)
++ return -ENODEV;
++ return phy_ethtool_gset(priv->phydev, cmd);
++ } else {
++ cmd->autoneg = 0;
++ cmd->speed = (priv->force_speed_100) ? SPEED_100 : SPEED_10;
++ cmd->duplex = (priv->force_duplex_full) ?
++ DUPLEX_FULL : DUPLEX_HALF;
++ cmd->supported = ADVERTISED_10baseT_Half |
++ ADVERTISED_10baseT_Full |
++ ADVERTISED_100baseT_Half |
++ ADVERTISED_100baseT_Full;
++ cmd->advertising = 0;
++ cmd->port = PORT_MII;
++ cmd->transceiver = XCVR_EXTERNAL;
++ }
++ return 0;
++}
++
++static int bcm_enet_set_settings(struct net_device *dev,
++ struct ethtool_cmd *cmd)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = netdev_priv(dev);
++ if (priv->has_phy) {
++ if (!priv->phydev)
++ return -ENODEV;
++ return phy_ethtool_sset(priv->phydev, cmd);
++ } else {
++
++ if (cmd->autoneg ||
++ (cmd->speed != SPEED_100 && cmd->speed != SPEED_10) ||
++ cmd->port != PORT_MII)
++ return -EINVAL;
++
++ priv->force_speed_100 = (cmd->speed == SPEED_100) ? 1 : 0;
++ priv->force_duplex_full = (cmd->duplex == DUPLEX_FULL) ? 1 : 0;
++
++ if (netif_running(dev))
++ bcm_enet_adjust_link(dev);
++ return 0;
++ }
++}
++
++static void bcm_enet_get_ringparam(struct net_device *dev,
++ struct ethtool_ringparam *ering)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = netdev_priv(dev);
++
++ /* rx/tx ring is actually only limited by memory */
++ ering->rx_max_pending = 8192;
++ ering->tx_max_pending = 8192;
++ ering->rx_mini_max_pending = 0;
++ ering->rx_jumbo_max_pending = 0;
++ ering->rx_pending = priv->rx_ring_size;
++ ering->tx_pending = priv->tx_ring_size;
++}
++
++static int bcm_enet_set_ringparam(struct net_device *dev,
++ struct ethtool_ringparam *ering)
++{
++ struct bcm_enet_priv *priv;
++ int was_running;
++
++ priv = netdev_priv(dev);
++
++ was_running = 0;
++ if (netif_running(dev)) {
++ bcm_enet_stop(dev);
++ was_running = 1;
++ }
++
++ priv->rx_ring_size = ering->rx_pending;
++ priv->tx_ring_size = ering->tx_pending;
++
++ if (was_running) {
++ int err;
++
++ err = bcm_enet_open(dev);
++ if (err)
++ dev_close(dev);
++ else
++ bcm_enet_set_multicast_list(dev);
++ }
++ return 0;
++}
++
++static void bcm_enet_get_pauseparam(struct net_device *dev,
++ struct ethtool_pauseparam *ecmd)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = netdev_priv(dev);
++ ecmd->autoneg = priv->pause_auto;
++ ecmd->rx_pause = priv->pause_rx;
++ ecmd->tx_pause = priv->pause_tx;
++}
++
++static int bcm_enet_set_pauseparam(struct net_device *dev,
++ struct ethtool_pauseparam *ecmd)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = netdev_priv(dev);
++
++ if (priv->has_phy) {
++ if (ecmd->autoneg && (ecmd->rx_pause != ecmd->tx_pause)) {
++ /* asymetric pause mode not supported,
++ * actually possible but integrated PHY has RO
++ * asym_pause bit */
++ return -EINVAL;
++ }
++ } else {
++ /* no pause autoneg on direct mii connection */
++ if (ecmd->autoneg)
++ return -EINVAL;
++ }
++
++ priv->pause_auto = ecmd->autoneg;
++ priv->pause_rx = ecmd->rx_pause;
++ priv->pause_tx = ecmd->tx_pause;
++
++ return 0;
++}
++
++static struct ethtool_ops bcm_enet_ethtool_ops = {
++ .get_strings = bcm_enet_get_strings,
++ .get_stats_count = bcm_enet_get_stats_count,
++ .get_ethtool_stats = bcm_enet_get_ethtool_stats,
++ .get_settings = bcm_enet_get_settings,
++ .set_settings = bcm_enet_set_settings,
++ .get_drvinfo = bcm_enet_get_drvinfo,
++ .get_link = ethtool_op_get_link,
++ .get_ringparam = bcm_enet_get_ringparam,
++ .set_ringparam = bcm_enet_set_ringparam,
++ .get_pauseparam = bcm_enet_get_pauseparam,
++ .set_pauseparam = bcm_enet_set_pauseparam,
++};
++
++static int bcm_enet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++ struct bcm_enet_priv *priv;
++
++ priv = netdev_priv(dev);
++ if (priv->has_phy) {
++ if (!priv->phydev)
++ return -ENODEV;
++ return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
++ } else {
++ struct mii_if_info mii;
++
++ mii.dev = dev;
++ mii.mdio_read = bcm_enet_mdio_read_mii;
++ mii.mdio_write = bcm_enet_mdio_write_mii;
++ mii.phy_id = 0;
++ mii.phy_id_mask = 0x3f;
++ mii.reg_num_mask = 0x1f;
++ return generic_mii_ioctl(&mii, if_mii(rq), cmd, NULL);
++ }
++}
++
++/*
++ * preinit hardware to allow mii operation while device is down
++ */
++static void bcm_enet_hw_preinit(struct bcm_enet_priv *priv)
++{
++ u32 val;
++ int limit;
++
++ /* make sure mac is disabled */
++ bcm_enet_disable_mac(priv);
++
++ /* soft reset mac */
++ val = ENET_CTL_SRESET_MASK;
++ enet_writel(priv, val, ENET_CTL_REG);
++ wmb();
++
++ limit = 1000;
++ do {
++ val = enet_readl(priv, ENET_CTL_REG);
++ if (!(val & ENET_CTL_SRESET_MASK))
++ break;
++ udelay(1);
++ } while (limit--);
++
++ /* select correct mii interface */
++ val = enet_readl(priv, ENET_CTL_REG);
++ if (priv->use_external_mii)
++ val |= ENET_CTL_EPHYSEL_MASK;
++ else
++ val &= ~ENET_CTL_EPHYSEL_MASK;
++ enet_writel(priv, val, ENET_CTL_REG);
++
++ /* turn on mdc clock */
++ enet_writel(priv, (0x1f << ENET_MIISC_MDCFREQDIV_SHIFT) |
++ ENET_MIISC_PREAMBLEEN_MASK, ENET_MIISC_REG);
++
++ /* set mib counters to self-clear when read */
++ val = enet_readl(priv, ENET_MIBCTL_REG);
++ val |= ENET_MIBCTL_RDCLEAR_MASK;
++ enet_writel(priv, val, ENET_MIBCTL_REG);
++}
++
++/*
++ * allocate netdevice, request register memory and register device.
++ */
++static int __devinit bcm_enet_probe(struct platform_device *pdev)
++{
++ struct bcm_enet_priv *priv;
++ struct net_device *dev;
++ struct bcm63xx_enet_platform_data *pd;
++ struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
++ struct mii_bus *bus;
++ const char *clk_name;
++ unsigned int iomem_size;
++ int i, ret, mdio_registered, mem_requested;
++
++ /* stop if shared driver failed, assume driver->probe will be
++ * called in the same order we register devices (correct ?) */
++ if (!bcm_enet_shared_base)
++ return -ENODEV;
++
++ mdio_registered = mem_requested = 0;
++
++ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
++ res_irq_tx = platform_get_resource(pdev, IORESOURCE_IRQ, 2);
++ if (!res_mem || !res_irq || !res_irq_rx || !res_irq_tx)
++ return -ENODEV;
++
++ ret = 0;
++ dev = alloc_etherdev(sizeof(*priv));
++ if (!dev)
++ return -ENOMEM;
++ priv = netdev_priv(dev);
++ memset(priv, 0, sizeof(*priv));
++
++ iomem_size = res_mem->end - res_mem->start + 1;
++ if (!request_mem_region(res_mem->start, iomem_size, "bcm63xx_enet")) {
++ ret = -EBUSY;
++ goto err;
++ }
++ mem_requested = 1;
++
++ priv->base = ioremap(res_mem->start, iomem_size);
++ if (priv->base == NULL) {
++ ret = -ENOMEM;
++ goto err;
++ }
++ dev->irq = priv->irq = res_irq->start;
++ priv->irq_rx = res_irq_rx->start;
++ priv->irq_tx = res_irq_tx->start;
++ priv->mac_id = pdev->id;
++
++ /* get rx & tx dma channel id for this mac */
++ if (priv->mac_id == 0) {
++ priv->rx_chan = 0;
++ priv->tx_chan = 1;
++ clk_name = "enet0";
++ } else {
++ priv->rx_chan = 2;
++ priv->tx_chan = 3;
++ clk_name = "enet1";
++ }
++
++ priv->mac_clk = clk_get(&pdev->dev, clk_name);
++ if (IS_ERR(priv->mac_clk)) {
++ ret = PTR_ERR(priv->mac_clk);
++ priv->mac_clk = NULL;
++ goto err;
++ }
++ clk_enable(priv->mac_clk);
++
++ /* initialize default and fetch platform data */
++ priv->rx_ring_size = BCMENET_DEF_RX_DESC;
++ priv->tx_ring_size = BCMENET_DEF_TX_DESC;
++
++ pd = pdev->dev.platform_data;
++ if (pd) {
++ memcpy(dev->dev_addr, pd->mac_addr, ETH_ALEN);
++ priv->has_phy = pd->has_phy;
++ priv->phy_id = pd->phy_id;
++ priv->has_phy_interrupt = pd->has_phy_interrupt;
++ priv->phy_interrupt = pd->phy_interrupt;
++ priv->use_external_mii = !pd->use_internal_phy;
++ priv->pause_auto = pd->pause_auto;
++ priv->pause_rx = pd->pause_rx;
++ priv->pause_tx = pd->pause_tx;
++ priv->force_duplex_full = pd->force_duplex_full;
++ priv->force_speed_100 = pd->force_speed_100;
++ }
++
++ if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
++ /* using internal PHY, enable clock */
++ priv->phy_clk = clk_get(&pdev->dev, "ephy");
++ if (IS_ERR(priv->phy_clk)) {
++ ret = PTR_ERR(priv->phy_clk);
++ priv->phy_clk = NULL;
++ goto err;
++ }
++ clk_enable(priv->phy_clk);
++ }
++
++ /* do minimal hardware init to be able to probe mii bus */
++ bcm_enet_hw_preinit(priv);
++
++ /* MII bus registration */
++ if (priv->has_phy) {
++ bus = &priv->mii_bus;
++ bus->name = "bcm63xx_enet MII bus";
++ bus->dev = &pdev->dev;
++ bus->priv = priv;
++ bus->read = bcm_enet_mdio_read_phylib;
++ bus->write = bcm_enet_mdio_write_phylib;
++ sprintf(bus->id, "%d", priv->mac_id);
++
++ /* only probe bus where we think the PHY is, because
++ * the mdio read operation return 0 instead of 0xffff
++ * if a slave is not present on hw */
++ bus->phy_mask = ~(1 << priv->phy_id);
++
++ bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
++ if (!bus->irq) {
++ ret = -ENOMEM;
++ goto err;
++ }
++
++ if (priv->has_phy_interrupt)
++ bus->irq[priv->phy_id] = priv->phy_interrupt;
++ else
++ bus->irq[priv->phy_id] = PHY_POLL;
++
++ ret = mdiobus_register(bus);
++ if (ret) {
++ dev_err(&pdev->dev, "unable to register mdio bus\n");
++ goto err;
++ }
++ mdio_registered = 1;
++ } else {
++
++ /* run platform code to initialize PHY device */
++ if (pd->mii_config &&
++ pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
++ bcm_enet_mdio_write_mii)) {
++ dev_err(&pdev->dev, "unable to configure mdio bus\n");
++ goto err;
++ }
++ }
++
++ spin_lock_init(&priv->rx_lock);
++
++ /* init rx timeout (used for oom) */
++ init_timer(&priv->rx_timeout);
++ priv->rx_timeout.function = bcm_enet_refill_rx_timer;
++ priv->rx_timeout.data = (unsigned long)dev;
++
++ /* init the mib update lock&work */
++ mutex_init(&priv->mib_update_lock);
++ INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
++
++ /* zero mib counters */
++ for (i = 0; i < ENET_MIB_REG_COUNT; i++)
++ enet_writel(priv, 0, ENET_MIB_REG(i));
++
++ /* register netdevice */
++ dev->open = bcm_enet_open;
++ dev->stop = bcm_enet_stop;
++ dev->hard_start_xmit = bcm_enet_start_xmit;
++ dev->get_stats = bcm_enet_get_stats;
++ dev->set_mac_address = bcm_enet_set_mac_address;
++ dev->set_multicast_list = bcm_enet_set_multicast_list;
++ netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
++ dev->do_ioctl = bcm_enet_ioctl;
++#ifdef CONFIG_NET_POLL_CONTROLLER
++ dev->poll_controller = bcm_enet_netpoll;
++#endif
++
++ SET_ETHTOOL_OPS(dev, &bcm_enet_ethtool_ops);
++
++ ret = register_netdev(dev);
++ if (ret)
++ goto err;
++
++ platform_set_drvdata(pdev, dev);
++ priv->pdev = pdev;
++ priv->net_dev = dev;
++ SET_NETDEV_DEV(dev, &pdev->dev);
++
++ return 0;
++
++err:
++ if (mem_requested)
++ release_mem_region(res_mem->start, iomem_size);
++ if (mdio_registered)
++ mdiobus_unregister(&priv->mii_bus);
++ kfree(priv->mii_bus.irq);
++ if (priv->mac_clk) {
++ clk_disable(priv->mac_clk);
++ clk_put(priv->mac_clk);
++ }
++ if (priv->phy_clk) {
++ clk_disable(priv->phy_clk);
++ clk_put(priv->phy_clk);
++ }
++ if (priv->base) {
++ /* turn off mdc clock */
++ enet_writel(priv, 0, ENET_MIISC_REG);
++ iounmap(priv->base);
++ }
++ free_netdev(dev);
++ return ret;
++}
++
++
++/*
++ * exit func, stops hardware and unregisters netdevice
++ */
++static int __devexit bcm_enet_remove(struct platform_device *pdev)
++{
++ struct bcm_enet_priv *priv;
++ struct net_device *dev;
++ struct resource *res;
++
++ /* stop netdevice */
++ dev = platform_get_drvdata(pdev);
++ priv = netdev_priv(dev);
++ unregister_netdev(dev);
++
++ /* turn off mdc clock */
++ enet_writel(priv, 0, ENET_MIISC_REG);
++
++ if (priv->has_phy) {
++ mdiobus_unregister(&priv->mii_bus);
++ kfree(priv->mii_bus.irq);
++ } else {
++ struct bcm63xx_enet_platform_data *pd;
++
++ pd = pdev->dev.platform_data;
++ if (pd && pd->mii_config)
++ pd->mii_config(dev, 0, bcm_enet_mdio_read_mii,
++ bcm_enet_mdio_write_mii);
++ }
++
++ /* release device resources */
++ iounmap(priv->base);
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ release_mem_region(res->start, res->end - res->start + 1);
++
++ /* disable hw block clocks */
++ if (priv->phy_clk) {
++ clk_disable(priv->phy_clk);
++ clk_put(priv->phy_clk);
++ }
++ clk_disable(priv->mac_clk);
++ clk_put(priv->mac_clk);
++
++ free_netdev(dev);
++ return 0;
++}
++
++struct platform_driver bcm63xx_enet_driver = {
++ .probe = bcm_enet_probe,
++ .remove = __devexit_p(bcm_enet_remove),
++ .driver = {
++ .name = "bcm63xx_enet",
++ .owner = THIS_MODULE,
++ },
++};
++
++/*
++ * reserve & remap memory space shared between all macs
++ */
++static int __devinit bcm_enet_shared_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ unsigned int iomem_size;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -ENODEV;
++
++ iomem_size = res->end - res->start + 1;
++ if (!request_mem_region(res->start, iomem_size, "bcm63xx_enet_dma"))
++ return -EBUSY;
++
++ bcm_enet_shared_base = ioremap(res->start, iomem_size);
++ if (!bcm_enet_shared_base) {
++ release_mem_region(res->start, iomem_size);
++ return -ENOMEM;
++ }
++ return 0;
++}
++
++static int __devexit bcm_enet_shared_remove(struct platform_device *pdev)
++{
++ struct resource *res;
++
++ iounmap(bcm_enet_shared_base);
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ release_mem_region(res->start, res->end - res->start + 1);
++ return 0;
++}
++
++/*
++ * this "shared" driver is needed because both macs share a single
++ * address space
++ */
++struct platform_driver bcm63xx_enet_shared_driver = {
++ .probe = bcm_enet_shared_probe,
++ .remove = __devexit_p(bcm_enet_shared_remove),
++ .driver = {
++ .name = "bcm63xx_enet_shared",
++ .owner = THIS_MODULE,
++ },
++};
++
++/*
++ * entry point
++ */
++static int __init bcm_enet_init(void)
++{
++ int ret;
++
++ ret = platform_driver_register(&bcm63xx_enet_shared_driver);
++ if (ret)
++ return ret;
++
++ ret = platform_driver_register(&bcm63xx_enet_driver);
++ if (ret)
++ platform_driver_unregister(&bcm63xx_enet_shared_driver);
++
++ return ret;
++}
++
++static void __exit bcm_enet_exit(void)
++{
++ platform_driver_unregister(&bcm63xx_enet_driver);
++ platform_driver_unregister(&bcm63xx_enet_shared_driver);
++}
++
++
++module_init(bcm_enet_init);
++module_exit(bcm_enet_exit);
++
++MODULE_DESCRIPTION("BCM63xx internal ethernet mac driver");
++MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/net/bcm63xx_enet.h b/drivers/net/bcm63xx_enet.h
+new file mode 100644
+index 0000000..fe7ffc1
+--- /dev/null
++++ b/drivers/net/bcm63xx_enet.h
+@@ -0,0 +1,294 @@
++#ifndef BCM63XX_ENET_H_
++#define BCM63XX_ENET_H_
++
++#include <linux/types.h>
++#include <linux/mii.h>
++#include <linux/mutex.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++
++#include <bcm63xx_regs.h>
++#include <bcm63xx_irq.h>
++#include <bcm63xx_io.h>
++
++/* default number of descriptor */
++#define BCMENET_DEF_RX_DESC 64
++#define BCMENET_DEF_TX_DESC 32
++
++/* maximum burst len for dma (4 bytes unit) */
++#define BCMENET_DMA_MAXBURST 16
++
++/* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value
++ * must be low enough so that a DMA transfer of above burst length can
++ * not overflow the fifo */
++#define BCMENET_TX_FIFO_TRESH 32
++
++/* maximum rx/tx packet size */
++#define BCMENET_MAX_RX_SIZE (ETH_FRAME_LEN + 4)
++#define BCMENET_MAX_TX_SIZE (ETH_FRAME_LEN + 4)
++
++/*
++ * rx/tx dma descriptor
++ */
++struct bcm_enet_desc {
++ u32 len_stat;
++ u32 address;
++};
++
++#define DMADESC_LENGTH_SHIFT 16
++#define DMADESC_LENGTH_MASK (0xfff << DMADESC_LENGTH_SHIFT)
++#define DMADESC_OWNER_MASK (1 << 15)
++#define DMADESC_EOP_MASK (1 << 14)
++#define DMADESC_SOP_MASK (1 << 13)
++#define DMADESC_ESOP_MASK (DMADESC_EOP_MASK | DMADESC_SOP_MASK)
++#define DMADESC_WRAP_MASK (1 << 12)
++
++#define DMADESC_UNDER_MASK (1 << 9)
++#define DMADESC_APPEND_CRC (1 << 8)
++#define DMADESC_OVSIZE_MASK (1 << 4)
++#define DMADESC_RXER_MASK (1 << 2)
++#define DMADESC_CRC_MASK (1 << 1)
++#define DMADESC_OV_MASK (1 << 0)
++#define DMADESC_ERR_MASK (DMADESC_UNDER_MASK | \
++ DMADESC_OVSIZE_MASK | \
++ DMADESC_RXER_MASK | \
++ DMADESC_CRC_MASK | \
++ DMADESC_OV_MASK)
++
++
++/*
++ * MIB Counters register definitions
++*/
++#define ETH_MIB_TX_GD_OCTETS 0
++#define ETH_MIB_TX_GD_PKTS 1
++#define ETH_MIB_TX_ALL_OCTETS 2
++#define ETH_MIB_TX_ALL_PKTS 3
++#define ETH_MIB_TX_BRDCAST 4
++#define ETH_MIB_TX_MULT 5
++#define ETH_MIB_TX_64 6
++#define ETH_MIB_TX_65_127 7
++#define ETH_MIB_TX_128_255 8
++#define ETH_MIB_TX_256_511 9
++#define ETH_MIB_TX_512_1023 10
++#define ETH_MIB_TX_1024_MAX 11
++#define ETH_MIB_TX_JAB 12
++#define ETH_MIB_TX_OVR 13
++#define ETH_MIB_TX_FRAG 14
++#define ETH_MIB_TX_UNDERRUN 15
++#define ETH_MIB_TX_COL 16
++#define ETH_MIB_TX_1_COL 17
++#define ETH_MIB_TX_M_COL 18
++#define ETH_MIB_TX_EX_COL 19
++#define ETH_MIB_TX_LATE 20
++#define ETH_MIB_TX_DEF 21
++#define ETH_MIB_TX_CRS 22
++#define ETH_MIB_TX_PAUSE 23
++
++#define ETH_MIB_RX_GD_OCTETS 32
++#define ETH_MIB_RX_GD_PKTS 33
++#define ETH_MIB_RX_ALL_OCTETS 34
++#define ETH_MIB_RX_ALL_PKTS 35
++#define ETH_MIB_RX_BRDCAST 36
++#define ETH_MIB_RX_MULT 37
++#define ETH_MIB_RX_64 38
++#define ETH_MIB_RX_65_127 39
++#define ETH_MIB_RX_128_255 40
++#define ETH_MIB_RX_256_511 41
++#define ETH_MIB_RX_512_1023 42
++#define ETH_MIB_RX_1024_MAX 43
++#define ETH_MIB_RX_JAB 44
++#define ETH_MIB_RX_OVR 45
++#define ETH_MIB_RX_FRAG 46
++#define ETH_MIB_RX_DROP 47
++#define ETH_MIB_RX_CRC_ALIGN 48
++#define ETH_MIB_RX_UND 49
++#define ETH_MIB_RX_CRC 50
++#define ETH_MIB_RX_ALIGN 51
++#define ETH_MIB_RX_SYM 52
++#define ETH_MIB_RX_PAUSE 53
++#define ETH_MIB_RX_CNTRL 54
++
++
++struct bcm_enet_mib_counters {
++ u64 tx_gd_octets;
++ u32 tx_gd_pkts;
++ u32 tx_all_octets;
++ u32 tx_all_pkts;
++ u32 tx_brdcast;
++ u32 tx_mult;
++ u32 tx_64;
++ u32 tx_65_127;
++ u32 tx_128_255;
++ u32 tx_256_511;
++ u32 tx_512_1023;
++ u32 tx_1024_max;
++ u32 tx_jab;
++ u32 tx_ovr;
++ u32 tx_frag;
++ u32 tx_underrun;
++ u32 tx_col;
++ u32 tx_1_col;
++ u32 tx_m_col;
++ u32 tx_ex_col;
++ u32 tx_late;
++ u32 tx_def;
++ u32 tx_crs;
++ u32 tx_pause;
++ u64 rx_gd_octets;
++ u32 rx_gd_pkts;
++ u32 rx_all_octets;
++ u32 rx_all_pkts;
++ u32 rx_brdcast;
++ u32 rx_mult;
++ u32 rx_64;
++ u32 rx_65_127;
++ u32 rx_128_255;
++ u32 rx_256_511;
++ u32 rx_512_1023;
++ u32 rx_1024_max;
++ u32 rx_jab;
++ u32 rx_ovr;
++ u32 rx_frag;
++ u32 rx_drop;
++ u32 rx_crc_align;
++ u32 rx_und;
++ u32 rx_crc;
++ u32 rx_align;
++ u32 rx_sym;
++ u32 rx_pause;
++ u32 rx_cntrl;
++};
++
++
++struct bcm_enet_priv {
++
++ /* mac id (from platform device id) */
++ int mac_id;
++
++ /* base remapped address of device */
++ void __iomem *base;
++
++ /* mac irq, rx_dma irq, tx_dma irq */
++ int irq;
++ int irq_rx;
++ int irq_tx;
++
++ /* hw view of rx & tx dma ring */
++ dma_addr_t rx_desc_dma;
++ dma_addr_t tx_desc_dma;
++
++ /* allocated size (in bytes) for rx & tx dma ring */
++ unsigned int rx_desc_alloc_size;
++ unsigned int tx_desc_alloc_size;
++
++
++ struct napi_struct napi;
++
++ /* dma channel id for rx */
++ int rx_chan;
++
++ /* number of dma desc in rx ring */
++ int rx_ring_size;
++
++ /* cpu view of rx dma ring */
++ struct bcm_enet_desc *rx_desc_cpu;
++
++ /* current number of armed descriptor given to hardware for rx */
++ int rx_desc_count;
++
++ /* next rx descriptor to fetch from hardware */
++ int rx_curr_desc;
++
++ /* next dirty rx descriptor to refill */
++ int rx_dirty_desc;
++
++ /* list of skb given to hw for rx */
++ struct sk_buff **rx_skb;
++
++ /* used when rx skb allocation failed, so we defer rx queue
++ * refill */
++ struct timer_list rx_timeout;
++
++ /* lock rx_timeout against rx normal operation */
++ spinlock_t rx_lock;
++
++
++ /* dma channel id for tx */
++ int tx_chan;
++
++ /* number of dma desc in tx ring */
++ int tx_ring_size;
++
++ /* cpu view of rx dma ring */
++ struct bcm_enet_desc *tx_desc_cpu;
++
++ /* number of available descriptor for tx */
++ int tx_desc_count;
++
++ /* next tx descriptor avaiable */
++ int tx_curr_desc;
++
++ /* next dirty tx descriptor to reclaim */
++ int tx_dirty_desc;
++
++ /* list of skb given to hw for tx */
++ struct sk_buff **tx_skb;
++
++ /* lock used by tx reclaim and xmit */
++ spinlock_t tx_lock;
++
++
++ /* set if internal phy is ignored and external mii interface
++ * is selected */
++ int use_external_mii;
++
++ /* set if a phy is connected, phy address must be known,
++ * probing is not possible */
++ int has_phy;
++ int phy_id;
++
++ /* set if connected phy has an associated irq */
++ int has_phy_interrupt;
++ int phy_interrupt;
++
++ /* used when a phy is connected (phylib used) */
++ struct mii_bus mii_bus;
++ struct phy_device *phydev;
++ int old_link;
++ int old_duplex;
++ int old_pause;
++
++ /* used when no phy is connected */
++ int force_speed_100;
++ int force_duplex_full;
++
++ /* pause parameters */
++ int pause_auto;
++ int pause_rx;
++ int pause_tx;
++
++ /* stats */
++ struct net_device_stats stats;
++ struct bcm_enet_mib_counters mib;
++
++ /* after mib interrupt, mib registers update is done in this
++ * work queue */
++ struct work_struct mib_update_task;
++
++ /* lock mib update between userspace request and workqueue */
++ struct mutex mib_update_lock;
++
++ /* mac clock */
++ struct clk *mac_clk;
++
++ /* phy clock if internal phy is used */
++ struct clk *phy_clk;
++
++ /* network device reference */
++ struct net_device *net_dev;
++
++ /* platform device reference */
++ struct platform_device *pdev;
++};
++
++#endif /* ! BCM63XX_ENET_H_ */
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h
+new file mode 100644
+index 0000000..d53f611
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h
+@@ -0,0 +1,45 @@
++#ifndef BCM63XX_DEV_ENET_H_
++#define BCM63XX_DEV_ENET_H_
++
++#include <linux/if_ether.h>
++#include <linux/init.h>
++
++/*
++ * on board ethernet platform data
++ */
++struct bcm63xx_enet_platform_data {
++ char mac_addr[ETH_ALEN];
++
++ int has_phy;
++
++ /* if has_phy, then set use_internal_phy */
++ int use_internal_phy;
++
++ /* or fill phy info to use an external one */
++ int phy_id;
++ int has_phy_interrupt;
++ int phy_interrupt;
++
++ /* if has_phy, use autonegociated pause parameters or force
++ * them */
++ int pause_auto;
++ int pause_rx;
++ int pause_tx;
++
++ /* if !has_phy, set desired forced speed/duplex */
++ int force_speed_100;
++ int force_duplex_full;
++
++ /* if !has_phy, set callback to perform mii device
++ * init/remove */
++ int (*mii_config)(struct net_device *dev, int probe,
++ int (*mii_read)(struct net_device *dev,
++ int phy_id, int reg),
++ void (*mii_write)(struct net_device *dev,
++ int phy_id, int reg, int val));
++};
++
++int __init bcm63xx_enet_register(int unit,
++ const struct bcm63xx_enet_platform_data *pd);
++
++#endif /* ! BCM63XX_DEV_ENET_H_ */
+--
+1.5.4.3
+
--- /dev/null
+From 7eefcb968019804e024c8243e28afb1eebd674a2 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Sun, 21 Sep 2008 02:20:53 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet PHY support for phylib.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ drivers/net/phy/Kconfig | 6 ++
+ drivers/net/phy/Makefile | 1 +
+ drivers/net/phy/bcm63xx.c | 132 +++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 139 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/net/phy/bcm63xx.c
+
+diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
+index d55932a..a5d2c2d 100644
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -56,6 +56,12 @@ config BROADCOM_PHY
+ Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
+ and BCM5482 PHYs.
+
++config BCM63XX_PHY
++ tristate "Drivers for Broadcom 63xx SOCs internal PHY"
++ depends on BCM63XX
++ ---help---
++ Currently supports the 6348 and 6358 PHYs.
++
+ config ICPLUS_PHY
+ tristate "Drivers for ICPlus PHYs"
+ ---help---
+diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
+index eee329f..0d43f58 100644
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o
+ obj-$(CONFIG_SMSC_PHY) += smsc.o
+ obj-$(CONFIG_VITESSE_PHY) += vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
++obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
+new file mode 100644
+index 0000000..4fed95e
+--- /dev/null
++++ b/drivers/net/phy/bcm63xx.c
+@@ -0,0 +1,132 @@
++/*
++ * Driver for Broadcom 63xx SOCs integrated PHYs
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++#include <linux/module.h>
++#include <linux/phy.h>
++
++#define MII_BCM63XX_IR 0x1a /* interrupt register */
++#define MII_BCM63XX_IR_EN 0x4000 /* global interrupt enable */
++#define MII_BCM63XX_IR_DUPLEX 0x0800 /* duplex changed */
++#define MII_BCM63XX_IR_SPEED 0x0400 /* speed changed */
++#define MII_BCM63XX_IR_LINK 0x0200 /* link changed */
++#define MII_BCM63XX_IR_GMASK 0x0100 /* global interrupt mask */
++
++MODULE_DESCRIPTION("Broadcom 63xx internal PHY driver");
++MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
++MODULE_LICENSE("GPL");
++
++static int bcm63xx_config_init(struct phy_device *phydev)
++{
++ int reg, err;
++
++ reg = phy_read(phydev, MII_BCM63XX_IR);
++ if (reg < 0)
++ return reg;
++
++ /* Mask interrupts globally. */
++ reg |= MII_BCM63XX_IR_GMASK;
++ err = phy_write(phydev, MII_BCM63XX_IR, reg);
++ if (err < 0)
++ return err;
++
++ /* Unmask events we are interested in */
++ reg = ~(MII_BCM63XX_IR_DUPLEX |
++ MII_BCM63XX_IR_SPEED |
++ MII_BCM63XX_IR_LINK) |
++ MII_BCM63XX_IR_EN;
++ err = phy_write(phydev, MII_BCM63XX_IR, reg);
++ if (err < 0)
++ return err;
++ return 0;
++}
++
++static int bcm63xx_ack_interrupt(struct phy_device *phydev)
++{
++ int reg;
++
++ /* Clear pending interrupts. */
++ reg = phy_read(phydev, MII_BCM63XX_IR);
++ if (reg < 0)
++ return reg;
++
++ return 0;
++}
++
++static int bcm63xx_config_intr(struct phy_device *phydev)
++{
++ int reg, err;
++
++ reg = phy_read(phydev, MII_BCM63XX_IR);
++ if (reg < 0)
++ return reg;
++
++ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
++ reg &= ~MII_BCM63XX_IR_GMASK;
++ else
++ reg |= MII_BCM63XX_IR_GMASK;
++
++ err = phy_write(phydev, MII_BCM63XX_IR, reg);
++ return err;
++}
++
++static struct phy_driver bcm63xx_1_driver = {
++ .phy_id = 0x00406000,
++ .phy_id_mask = 0xfffffc00,
++ .name = "Broadcom BCM63XX (1)",
++ /* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
++ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
++ .flags = PHY_HAS_INTERRUPT,
++ .config_init = bcm63xx_config_init,
++ .config_aneg = genphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = bcm63xx_ack_interrupt,
++ .config_intr = bcm63xx_config_intr,
++ .driver = { .owner = THIS_MODULE },
++};
++
++/* same phy as above, with just a different OUI */
++static struct phy_driver bcm63xx_2_driver = {
++ .phy_id = 0x002bdc00,
++ .phy_id_mask = 0xfffffc00,
++ .name = "Broadcom BCM63XX (2)",
++ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
++ .flags = PHY_HAS_INTERRUPT,
++ .config_init = bcm63xx_config_init,
++ .config_aneg = genphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = bcm63xx_ack_interrupt,
++ .config_intr = bcm63xx_config_intr,
++ .driver = { .owner = THIS_MODULE },
++};
++
++static int __init bcm63xx_phy_init(void)
++{
++ int ret;
++
++ ret = phy_driver_register(&bcm63xx_1_driver);
++ if (ret)
++ goto out_63xx_1;
++ ret = phy_driver_register(&bcm63xx_2_driver);
++ if (ret)
++ goto out_63xx_2;
++ return ret;
++
++out_63xx_2:
++ phy_driver_unregister(&bcm63xx_1_driver);
++out_63xx_1:
++ return ret;
++}
++
++static void __exit bcm63xx_phy_exit(void)
++{
++ phy_driver_unregister(&bcm63xx_1_driver);
++ phy_driver_unregister(&bcm63xx_2_driver);
++}
++
++module_init(bcm63xx_phy_init);
++module_exit(bcm63xx_phy_exit);
+--
+1.5.4.3
+
--- /dev/null
+From b95a2bbbcae5423e5404a7b3c8dd1685e1786f13 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Wed, 17 Sep 2008 15:55:36 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add preliminary board support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig | 2 +
+ arch/mips/bcm63xx/Makefile | 2 +
+ arch/mips/bcm63xx/boards/Kconfig | 10 +
+ arch/mips/bcm63xx/boards/Makefile | 1 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 322 ++++++++++++++++++++++++
+ arch/mips/bcm63xx/prom.c | 4 +
+ arch/mips/bcm63xx/setup.c | 16 +-
+ include/asm-mips/mach-bcm63xx/bcm63xx_board.h | 12 +
+ include/asm-mips/mach-bcm63xx/board_bcm963xx.h | 50 ++++
+ 9 files changed, 417 insertions(+), 2 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/boards/Kconfig
+ create mode 100644 arch/mips/bcm63xx/boards/Makefile
+ create mode 100644 arch/mips/bcm63xx/boards/board_bcm963xx.c
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_board.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/board_bcm963xx.h
+
+diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
+index be120f7..8c192e7 100644
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -17,3 +17,5 @@ config BCM63XX_CPU_6358
+ select USB_ARCH_HAS_EHCI
+ select USB_EHCI_BIG_ENDIAN_MMIO
+ endmenu
++
++source "arch/mips/bcm63xx/boards/Kconfig"
+diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
+index 5358093..10462ae 100644
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -5,3 +5,5 @@ obj-y += dev-usb-ohci.o
+ obj-y += dev-usb-ehci.o
+ obj-y += dev-enet.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
++
++obj-y += boards/
+diff --git a/arch/mips/bcm63xx/boards/Kconfig b/arch/mips/bcm63xx/boards/Kconfig
+new file mode 100644
+index 0000000..da5eeaa
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -0,0 +1,10 @@
++choice
++ prompt "Board support"
++ depends on BCM63XX
++ default BOARD_BCM963XX
++
++config BOARD_BCM963XX
++ bool "Generic Broadcom 963xx boards"
++ help
++
++endchoice
+diff --git a/arch/mips/bcm63xx/boards/Makefile b/arch/mips/bcm63xx/boards/Makefile
+new file mode 100644
+index 0000000..af07c1a
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o
+diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+new file mode 100644
+index 0000000..de52a2a
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -0,0 +1,322 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_uart.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_ehci.h>
++#include <board_bcm963xx.h>
++
++#define PFX "board_bcm963xx: "
++
++static struct bcm963xx_nvram nvram;
++static unsigned int mac_addr_used = 0;
++static struct board_info board;
++
++/*
++ * known 6348 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6348
++static struct board_info __initdata board_96348r = {
++ .name = "96348R",
++ .expected_cpu_id = 0x6348,
++
++ .has_enet0 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++};
++
++static struct board_info __initdata board_96348gw = {
++ .name = "96348GW",
++ .expected_cpu_id = 0x6348,
++
++ .has_enet0 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++};
++#endif
++
++/*
++ * known 6358 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6358
++static struct board_info __initdata board_96358vw2 = {
++ .name = "96358VW2",
++ .expected_cpu_id = 0x6358,
++
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++
++ .has_ohci0 = 1,
++ .has_pccard = 1,
++ .has_ehci0 = 1,
++};
++#endif
++
++/*
++ * all boards
++ */
++static const struct board_info __initdata *bcm963xx_boards[] = {
++#ifdef CONFIG_BCM63XX_CPU_6348
++ &board_96348r,
++ &board_96348gw,
++#endif
++
++#ifdef CONFIG_BCM63XX_CPU_6358
++ &board_96358vw2,
++#endif
++};
++
++/*
++ * early init callback, read nvram data from flash and checksum it
++ */
++void __init board_prom_init(void)
++{
++ unsigned int check_len, i;
++ u8 *boot_addr, *cfe, *p;
++ char cfe_version[32];
++ u32 val;
++
++ /* read base address of boot chip select (0) */
++ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++ val &= MPI_CSBASE_BASE_MASK;
++ boot_addr = (u8 *)KSEG1ADDR(val);
++
++ /* dump cfe version */
++ cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
++ if (!memcmp(cfe, "cfe-v", 5))
++ snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
++ cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
++ else
++ strcpy(cfe_version, "unknown");
++ printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
++
++ /* extract nvram data */
++ memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
++
++ /* check checksum before using data */
++ if (nvram.version <= 4)
++ check_len = offsetof(struct bcm963xx_nvram, checksum_old);
++ else
++ check_len = sizeof(nvram);
++ val = 0;
++ p = (u8 *)&nvram;
++ while (check_len--)
++ val += *p;
++ if (val) {
++ printk(KERN_ERR PFX "invalid nvram checksum\n");
++ return;
++ }
++
++ /* find board by name */
++ for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
++ if (strncmp(nvram.name, bcm963xx_boards[i]->name,
++ sizeof(nvram.name)))
++ continue;
++ /* copy, board desc array is marked initdata */
++ memcpy(&board, bcm963xx_boards[i], sizeof(board));
++ break;
++ }
++
++ /* bail out if board is not found, will complain later */
++ if (!board.name)
++ return;
++
++ /* setup pin multiplexing depending on board enabled device,
++ * this has to be done this early since PCI init is done
++ * inside arch_initcall */
++ val = 0;
++
++ if (board.has_pci) {
++ bcm63xx_pci_enabled = 1;
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G2_PCI;
++ }
++
++ if (board.has_pccard) {
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G1_MII_PCCARD;
++ }
++
++ if (board.has_enet0 && !board.enet0.use_internal_phy) {
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G3_EXT_MII |
++ GPIO_MODE_6348_G0_EXT_MII;
++ }
++
++ if (board.has_enet1 && !board.enet1.use_internal_phy) {
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G3_EXT_MII |
++ GPIO_MODE_6348_G0_EXT_MII;
++ }
++
++ bcm_gpio_writel(val, GPIO_MODE_REG);
++}
++
++/*
++ * second stage init callback, good time to panic if we couldn't
++ * identify on which board we're running since early printk is working
++ */
++void __init board_setup(void)
++{
++ if (!board.name)
++ panic("unable to detect bcm963xx board");
++ printk(KERN_INFO PFX "board name: %s\n", board.name);
++
++ /* make sure we're running on expected cpu */
++ if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
++ panic("unexpected CPU for bcm963xx board");
++}
++
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++ return board.name;
++}
++
++/*
++ * register & return a new board mac address
++ */
++static int board_get_mac_address(u8 *mac)
++{
++ u8 *p;
++ int count;
++
++ if (mac_addr_used >= nvram.mac_addr_count) {
++ printk(KERN_ERR PFX "not enough mac address\n");
++ return -ENODEV;
++ }
++
++ memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
++ p = mac + ETH_ALEN - 1;
++ count = mac_addr_used;
++
++ while (count--) {
++ do {
++ (*p)++;
++ if (*p != 0)
++ break;
++ p--;
++ } while (p != mac);
++ }
++
++ if (p == mac) {
++ printk(KERN_ERR PFX "unable to fetch mac address\n");
++ return -ENODEV;
++ }
++
++ mac_addr_used++;
++ return 0;
++}
++
++static struct mtd_partition mtd_partitions[] = {
++ {
++ .name = "cfe",
++ .offset = 0x0,
++ .size = 0x40000,
++ }
++};
++
++static struct physmap_flash_data flash_data = {
++ .width = 2,
++ .nr_parts = ARRAY_SIZE(mtd_partitions),
++ .parts = mtd_partitions,
++};
++
++static struct resource mtd_resources[] = {
++ {
++ .start = 0, /* filled at runtime */
++ .end = 0, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device mtd_dev = {
++ .name = "physmap-flash",
++ .resource = mtd_resources,
++ .num_resources = ARRAY_SIZE(mtd_resources),
++ .dev = {
++ .platform_data = &flash_data,
++ },
++};
++
++/*
++ * third stage init callback, register all board devices.
++ */
++int __init board_register_devices(void)
++{
++ u32 val;
++
++ bcm63xx_uart_register();
++
++ if (board.has_pccard)
++ bcm63xx_pcmcia_register();
++
++ if (board.has_enet0 &&
++ !board_get_mac_address(board.enet0.mac_addr))
++ bcm63xx_enet_register(0, &board.enet0);
++
++ if (board.has_enet1 &&
++ !board_get_mac_address(board.enet1.mac_addr))
++ bcm63xx_enet_register(1, &board.enet1);
++
++ if (board.has_ohci0)
++ bcm63xx_ohci_register();
++
++ if (board.has_ehci0)
++ bcm63xx_ehci_register();
++
++
++ /* read base address of boot chip select (0) */
++ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++ val &= MPI_CSBASE_BASE_MASK;
++ mtd_resources[0].start = val;
++ mtd_resources[0].end = 0x1FFFFFFF;
++
++ platform_device_register(&mtd_dev);
++
++ return 0;
++}
++
+diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
+index f0b49e8..d97ceed 100644
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -9,6 +9,7 @@
+ #include <linux/init.h>
+ #include <linux/bootmem.h>
+ #include <asm/bootinfo.h>
++#include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+@@ -36,6 +37,9 @@ void __init prom_init(void)
+
+ /* assign command line from kernel config */
+ strcpy(arcs_cmdline, CONFIG_CMDLINE);
++
++ /* do low level board init */
++ board_prom_init();
+ }
+
+ void __init prom_free_prom_memory(void)
+diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
+index 4d8b127..c4516fb 100644
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -16,6 +16,7 @@
+ #include <asm/time.h>
+ #include <asm/reboot.h>
+ #include <asm/cacheflush.h>
++#include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+@@ -87,8 +88,9 @@ static void __bcm63xx_machine_reboot(char *p)
+ const char *get_system_type(void)
+ {
+ static char buf[128];
+- sprintf(buf, "bcm963xx (0x%04x/0x%04X)",
+- bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
++ snprintf(buf, sizeof (buf), "bcm63xx/%s (0x%04x/0x%04X)",
++ board_get_name(),
++ bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
+ return buf;
+ }
+
+@@ -96,6 +98,7 @@ void __init plat_time_init(void)
+ {
+ mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
+ }
++
+ void __init plat_mem_setup(void)
+ {
+ add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
+@@ -107,4 +110,13 @@ void __init plat_mem_setup(void)
+ set_io_port_base(0);
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
++
++ board_setup();
++}
++
++int __init bcm63xx_register_devices(void)
++{
++ return board_register_devices();
+ }
++
++device_initcall(bcm63xx_register_devices);
+diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_board.h b/include/asm-mips/mach-bcm63xx/bcm63xx_board.h
+new file mode 100644
+index 0000000..fa3e7e6
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/bcm63xx_board.h
+@@ -0,0 +1,12 @@
++#ifndef BCM63XX_BOARD_H_
++#define BCM63XX_BOARD_H_
++
++const char *board_get_name(void);
++
++void board_prom_init(void);
++
++void board_setup(void);
++
++int board_register_devices(void);
++
++#endif /* ! BCM63XX_BOARD_H_ */
+diff --git a/include/asm-mips/mach-bcm63xx/board_bcm963xx.h b/include/asm-mips/mach-bcm63xx/board_bcm963xx.h
+new file mode 100644
+index 0000000..17e4e7e
+--- /dev/null
++++ b/include/asm-mips/mach-bcm63xx/board_bcm963xx.h
+@@ -0,0 +1,50 @@
++#ifndef BOARD_BCM963XX_H_
++#define BOARD_BCM963XX_H_
++
++#include <linux/types.h>
++#include <bcm63xx_dev_enet.h>
++
++/*
++ * flash mapping
++ */
++#define BCM963XX_CFE_VERSION_OFFSET 0x570
++#define BCM963XX_NVRAM_OFFSET 0x580
++
++/*
++ * nvram structure
++ */
++struct bcm963xx_nvram {
++ u32 version;
++ u8 reserved1[256];
++ u8 name[16];
++ u32 main_tp_number;
++ u32 psi_size;
++ u32 mac_addr_count;
++ u8 mac_addr_base[6];
++ u8 reserved2[2];
++ u32 checksum_old;
++ u8 reserved3[720];
++ u32 checksum_high;
++};
++
++/*
++ * board definition
++ */
++struct board_info {
++ u8 name[16];
++ unsigned int expected_cpu_id;
++
++ /* enabled feature/device */
++ unsigned int has_enet0:1;
++ unsigned int has_enet1:1;
++ unsigned int has_pci:1;
++ unsigned int has_pccard:1;
++ unsigned int has_ohci0:1;
++ unsigned int has_ehci0:1;
++
++ /* ethernet config */
++ struct bcm63xx_enet_platform_data enet0;
++ struct bcm63xx_enet_platform_data enet1;
++};
++
++#endif /* ! BOARD_BCM963XX_H_ */
+--
+1.5.4.3
+
--- /dev/null
+From 81ee4742b6f77589aa3b3d03b1878de1b9bf0855 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Mon, 22 Sep 2008 10:41:15 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add defconfig.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/configs/bcm63xx_defconfig | 868 +++++++++++++++++++++++++++++++++++
+ 1 files changed, 868 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/configs/bcm63xx_defconfig
+
+diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
+new file mode 100644
+index 0000000..65cacae
+--- /dev/null
++++ b/arch/mips/configs/bcm63xx_defconfig
+@@ -0,0 +1,868 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.27
++# Fri Oct 17 06:51:37 2008
++#
++CONFIG_MIPS=y
++
++#
++# Machine selection
++#
++# CONFIG_MACH_ALCHEMY is not set
++# CONFIG_BASLER_EXCITE is not set
++# CONFIG_BCM47XX is not set
++CONFIG_BCM63XX=y
++# CONFIG_MIPS_COBALT is not set
++# CONFIG_MACH_DECSTATION is not set
++# CONFIG_MACH_JAZZ is not set
++# CONFIG_LASAT is not set
++# CONFIG_LEMOTE_FULONG is not set
++# CONFIG_MIPS_MALTA is not set
++# CONFIG_MIPS_SIM is not set
++# CONFIG_MARKEINS is not set
++# CONFIG_MACH_VR41XX is not set
++# CONFIG_PNX8550_JBS is not set
++# CONFIG_PNX8550_STB810 is not set
++# CONFIG_PMC_MSP is not set
++# CONFIG_PMC_YOSEMITE is not set
++# CONFIG_SGI_IP22 is not set
++# CONFIG_SGI_IP27 is not set
++# CONFIG_SGI_IP28 is not set
++# CONFIG_SGI_IP32 is not set
++# CONFIG_SIBYTE_CRHINE is not set
++# CONFIG_SIBYTE_CARMEL is not set
++# CONFIG_SIBYTE_CRHONE is not set
++# CONFIG_SIBYTE_RHONE is not set
++# CONFIG_SIBYTE_SWARM is not set
++# CONFIG_SIBYTE_LITTLESUR is not set
++# CONFIG_SIBYTE_SENTOSA is not set
++# CONFIG_SIBYTE_BIGSUR is not set
++# CONFIG_SNI_RM is not set
++# CONFIG_MACH_TX39XX is not set
++# CONFIG_MACH_TX49XX is not set
++# CONFIG_MIKROTIK_RB532 is not set
++# CONFIG_WR_PPMC is not set
++
++#
++# CPU support
++#
++CONFIG_BCM63XX_CPU_6348=y
++CONFIG_BCM63XX_CPU_6358=y
++CONFIG_BOARD_BCM963XX=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
++CONFIG_CEVT_R4K=y
++CONFIG_CSRC_R4K=y
++CONFIG_DMA_NONCOHERENT=y
++CONFIG_DMA_NEED_PCI_MAP_STATE=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_SYS_HAS_EARLY_PRINTK=y
++# CONFIG_HOTPLUG_CPU is not set
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_GPIO=y
++CONFIG_CPU_BIG_ENDIAN=y
++# CONFIG_CPU_LITTLE_ENDIAN is not set
++CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
++CONFIG_IRQ_CPU=y
++CONFIG_SWAP_IO_SPACE=y
++CONFIG_MIPS_L1_CACHE_SHIFT=5
++
++#
++# CPU selection
++#
++# CONFIG_CPU_LOONGSON2 is not set
++CONFIG_CPU_MIPS32_R1=y
++# CONFIG_CPU_MIPS32_R2 is not set
++# CONFIG_CPU_MIPS64_R1 is not set
++# CONFIG_CPU_MIPS64_R2 is not set
++# CONFIG_CPU_R3000 is not set
++# CONFIG_CPU_TX39XX is not set
++# CONFIG_CPU_VR41XX is not set
++# CONFIG_CPU_R4300 is not set
++# CONFIG_CPU_R4X00 is not set
++# CONFIG_CPU_TX49XX is not set
++# CONFIG_CPU_R5000 is not set
++# CONFIG_CPU_R5432 is not set
++# CONFIG_CPU_R6000 is not set
++# CONFIG_CPU_NEVADA is not set
++# CONFIG_CPU_R8000 is not set
++# CONFIG_CPU_R10000 is not set
++# CONFIG_CPU_RM7000 is not set
++# CONFIG_CPU_RM9000 is not set
++# CONFIG_CPU_SB1 is not set
++CONFIG_SYS_HAS_CPU_MIPS32_R1=y
++CONFIG_CPU_MIPS32=y
++CONFIG_CPU_MIPSR1=y
++CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
++CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
++
++#
++# Kernel type
++#
++CONFIG_32BIT=y
++# CONFIG_64BIT is not set
++CONFIG_PAGE_SIZE_4KB=y
++# CONFIG_PAGE_SIZE_8KB is not set
++# CONFIG_PAGE_SIZE_16KB is not set
++# CONFIG_PAGE_SIZE_64KB is not set
++CONFIG_CPU_HAS_PREFETCH=y
++CONFIG_MIPS_MT_DISABLED=y
++# CONFIG_MIPS_MT_SMP is not set
++# CONFIG_MIPS_MT_SMTC is not set
++CONFIG_CPU_HAS_LLSC=y
++CONFIG_CPU_HAS_SYNC=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_CPU_SUPPORTS_HIGHMEM=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_48 is not set
++# CONFIG_HZ_100 is not set
++# CONFIG_HZ_128 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_256 is not set
++# CONFIG_HZ_1000 is not set
++# CONFIG_HZ_1024 is not set
++CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
++CONFIG_HZ=250
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_KEXEC is not set
++# CONFIG_SECCOMP is not set
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++# CONFIG_SYSVIPC is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=17
++# CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++# CONFIG_BLK_DEV_INITRD is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_PCSPKR_PLATFORM is not set
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++# CONFIG_FUTEX is not set
++# CONFIG_EPOLL is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
++# CONFIG_EVENTFD is not set
++# CONFIG_SHMEM is not set
++# CONFIG_VM_EVENT_COUNTERS is not set
++# CONFIG_SLUB_DEBUG is not set
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
++# CONFIG_HAVE_IOREMAP_PROT is not set
++# CONFIG_HAVE_KPROBES is not set
++# CONFIG_HAVE_KRETPROBES is not set
++# CONFIG_HAVE_ARCH_TRACEHOOK is not set
++# CONFIG_HAVE_DMA_ATTRS is not set
++# CONFIG_USE_GENERIC_SMP_HELPERS is not set
++# CONFIG_HAVE_CLK is not set
++CONFIG_PROC_PAGE_MONITOR=y
++# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++CONFIG_TINY_SHMEM=y
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Bus options (PCI, PCMCIA, EISA, ISA, TC)
++#
++CONFIG_HW_HAS_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCI_LEGACY is not set
++CONFIG_MMU=y
++CONFIG_PCCARD=y
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=y
++CONFIG_PCMCIA_LOAD_CIS=y
++CONFIG_PCMCIA_IOCTL=y
++CONFIG_CARDBUS=y
++
++#
++# PC-card bridges
++#
++# CONFIG_YENTA is not set
++# CONFIG_PD6729 is not set
++# CONFIG_I82092 is not set
++CONFIG_PCMCIA_BCM63XX=y
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_TRAD_SIGNALS=y
++
++#
++# Power management options
++#
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++# CONFIG_PM is not set
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_PACKET is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_STANDALONE is not set
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++# CONFIG_MTD_CHAR is not set
++# CONFIG_MTD_BLKDEVS is not set
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++# CONFIG_BLK_DEV is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++
++#
++# Enable only one of the two stacks, unless you know what you are doing
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++CONFIG_BCM63XX_PHY=y
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_AX88796 is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_DM9000 is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_BCM63XX_ENET=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_NET_PCMCIA is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_DEVKMEM is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_BCM63XX=y
++CONFIG_SERIAL_BCM63XX_CONSOLE=y
++# CONFIG_UNIX98_PTYS is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++
++#
++# PCMCIA character devices
++#
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
++# CONFIG_IPWIRELESS is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++# CONFIG_SPI is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++CONFIG_DISPLAY_SUPPORT=y
++
++#
++# Display hardware drivers
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++# CONFIG_USB_DEVICEFS is not set
++# CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MON is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
++CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_UHCI_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_ACCESSIBILITY is not set
++# CONFIG_INFINIBAND is not set
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++# CONFIG_EXT2_FS is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++CONFIG_SYSCTL_SYSCALL_CHECK=y
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++CONFIG_CMDLINE="console=ttyS0,115200"
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_GENERIC_FIND_FIRST_BIT is not set
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+--
+1.5.4.3
+
projects / openwrt / staging / hauke.git / commitdiff