[media] tvp5150: Add video format registers configuration values

The tvp5150 video decoder has two operation modes to configure the video
standard used.

If auto-switch mode is enable, the device can sense the signal and detect which
video standard the device is operating. Also the device can be forced to use a
user defined video standard.

Each operation mode uses a different register and the bitmask values to
represent each standard is different.

So we add video standard constants for both autoswitch and no-autoswitch mode.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/tvp5150_reg.h b/drivers/media/video/tvp5150_reg.h
index 4240043c0b2a5ea445c2bd2247a3037722cc9e43..25a994944918703f064eee85a6017ca7010dca4b 100644 (file)
--- a/drivers/media/video/tvp5150_reg.h
+++ b/drivers/media/video/tvp5150_reg.h
@@ -45,7 +45,22 @@
 
 /* Reserved 1Fh-27h */
 
-#define TVP5150_VIDEO_STD           0x28 /* Video standard */
+#define VIDEO_STD_MASK                  (0x07 >> 1)
+#define TVP5150_VIDEO_STD                0x28 /* Video standard */
+#define VIDEO_STD_AUTO_SWITCH_BIT       0x00
+#define VIDEO_STD_NTSC_MJ_BIT           0x02
+#define VIDEO_STD_PAL_BDGHIN_BIT        0x04
+#define VIDEO_STD_PAL_M_BIT             0x06
+#define VIDEO_STD_PAL_COMBINATION_N_BIT         0x08
+#define VIDEO_STD_NTSC_4_43_BIT                 0x0a
+#define VIDEO_STD_SECAM_BIT             0x0c
+
+#define VIDEO_STD_NTSC_MJ_BIT_AS                 0x01
+#define VIDEO_STD_PAL_BDGHIN_BIT_AS              0x03
+#define VIDEO_STD_PAL_M_BIT_AS                  0x05
+#define VIDEO_STD_PAL_COMBINATION_N_BIT_AS      0x07
+#define VIDEO_STD_NTSC_4_43_BIT_AS              0x09
+#define VIDEO_STD_SECAM_BIT_AS                  0x0b
 
 /* Reserved 29h-2bh */