Revert "ramips: improve interrupt mapping"

This reverts commit 5f7396ebef09b224edf08b0bda113613a42f0928.

Signed-off-by: John Crispin <john@phrozen.org>

diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi
index 87399a113ef5fd71a7c24fbb89d76e03b0e9aa18..daca857f605c650a1f506e7d18db19896fc3fe34 100644 (file)
--- a/target/linux/ramips/dts/mt7621.dtsi
+++ b/target/linux/ramips/dts/mt7621.dtsi
@@ -440,11 +440,10 @@
                        0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
                >;
 
-               #interrupt-cells = <1>;
-               interrupt-map-mask = <0xF0000 0 0 1>;
-               interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
-                               <0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
-                               <0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-parent = <&gic>;
+               interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH
+                               GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
+                               GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
 
                status = "disabled";
 

diff --git a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c
index 80f9cc208054952da1cd2e39a27a00ea71e30eaf..4209e2330f7ac0c2b0b32a81de3291af5477b032 100644 (file)
--- a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c
+++ b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c
@@ -74,6 +74,9 @@ extern void chk_phy_pll(void);
 
 #define RALINK_PCI_CONFIG_ADDR                         0x20
 #define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG     0x24
+#define RALINK_INT_PCIE0         pcie_irq[0]
+#define RALINK_INT_PCIE1         pcie_irq[1]
+#define RALINK_INT_PCIE2         pcie_irq[2]
 #define RALINK_PCI_MEMBASE              *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
 #define RALINK_PCI_IOBASE               *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
 #define RALINK_PCIE0_RST                (1<<24)
@@ -364,12 +367,68 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
        u16 cmd;
        u32 val;
-       int irq;
-
-       if (dev->bus->number == 0) {
-               write_config(0, slot, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-               read_config(0, slot, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-               printk("BAR0 at slot %d = %x\n", slot, val);
+       int irq = 0;
+
+       if ((dev->bus->number == 0) && (slot == 0)) {
+               write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+               read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
+               printk("BAR0 at slot 0 = %x\n", val);
+               printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+       } else if((dev->bus->number == 0) && (slot == 0x1)) {
+               write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+               read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
+               printk("BAR0 at slot 1 = %x\n", val);
+               printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+       } else if((dev->bus->number == 0) && (slot == 0x2)) {
+               write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+               read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
+               printk("BAR0 at slot 2 = %x\n", val);
+               printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+       } else if ((dev->bus->number == 1) && (slot == 0x0)) {
+               switch (pcie_link_status) {
+               case 2:
+               case 6:
+                       irq = RALINK_INT_PCIE1;
+                       break;
+               case 4:
+                       irq = RALINK_INT_PCIE2;
+                       break;
+               default:
+                       irq = RALINK_INT_PCIE0;
+               }
+               printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+       } else if ((dev->bus->number == 2) && (slot == 0x0)) {
+               switch (pcie_link_status) {
+               case 5:
+               case 6:
+                       irq = RALINK_INT_PCIE2;
+                       break;
+               default:
+                       irq = RALINK_INT_PCIE1;
+               }
+               printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+       } else if ((dev->bus->number == 2) && (slot == 0x1)) {
+               switch (pcie_link_status) {
+               case 5:
+               case 6:
+                       irq = RALINK_INT_PCIE2;
+                       break;
+               default:
+                       irq = RALINK_INT_PCIE1;
+               }
+               printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+       } else if ((dev->bus->number ==3) && (slot == 0x0)) {
+               irq = RALINK_INT_PCIE2;
+               printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+       } else if ((dev->bus->number ==3) && (slot == 0x1)) {
+               irq = RALINK_INT_PCIE2;
+               printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+       } else if ((dev->bus->number ==3) && (slot == 0x2)) {
+               irq = RALINK_INT_PCIE2;
+               printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+       } else {
+               printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+               return 0;
        }
 
        pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);  //configure cache line size 0x14
@@ -377,9 +436,6 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
        pci_read_config_word(dev, PCI_COMMAND, &cmd);
        cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
        pci_write_config_word(dev, PCI_COMMAND, cmd);
-
-       irq = of_irq_parse_and_map_pci(dev, slot, pin);
-
        pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
        return irq;
 }