staging: ks7010: fix checkpatch BLOCK_COMMENT_STYLE

Checkpatch emits block comments warnings.

Change comments blocks to be inline with kernel coding style for
networking code.

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/ks7010/ks_wlan_net.c b/drivers/staging/ks7010/ks_wlan_net.c
index 75e42a7f0ca916b800be2e702f3f82e39469fd63..1ff19480ae51782524014cc005b42935f2e11692 100644 (file)
--- a/drivers/staging/ks7010/ks_wlan_net.c
+++ b/drivers/staging/ks7010/ks_wlan_net.c
@@ -230,7 +230,8 @@ static int ks_wlan_set_freq(struct net_device *dev,
        } else {
                int channel = fwrq->m;
                /* We should do a better check than that,
-                * based on the card capability !!! */
+                * based on the card capability !!!
+                */
                if ((channel < 1) || (channel > 14)) {
                        netdev_dbg(dev,
                                   "%s: New channel value of %d is invalid!\n",
@@ -343,7 +344,8 @@ static int ks_wlan_get_essid(struct net_device *dev,
 
        /* for SLEEP MODE */
        /* Note : if dwrq->flags != 0, we should
-        * get the relevant SSID from the SSID list... */
+        * get the relevant SSID from the SSID list...
+        */
        if (priv->reg.ssid.size) {
                /* Get the current SSID */
                memcpy(extra, priv->reg.ssid.body, priv->reg.ssid.size);
@@ -1139,7 +1141,8 @@ static int ks_wlan_get_range(struct net_device *dev,
        range->max_nwid = 0x0000;
        range->num_channels = 14;
        /* Should be based on cap_rid.country to give only
-        * what the current card support */
+        * what the current card support
+        */
        k = 0;
        for (i = 0; i < 13; i++) {      /* channel 1 -- 13 */
                range->freq[k].i = i + 1;       /* List index */
@@ -1191,7 +1194,8 @@ static int ks_wlan_get_range(struct net_device *dev,
 
        /* Set an indication of the max TCP throughput
         * in bit/s that we can expect using this interface.
-        * May be use for QoS stuff... Jean II */
+        * May be use for QoS stuff... Jean II
+        */
        if (i > 2)
                range->throughput = 5000 * 1000;
        else
@@ -1225,9 +1229,11 @@ static int ks_wlan_get_range(struct net_device *dev,
        range->retry_flags = IW_RETRY_ON;
        range->r_time_flags = IW_RETRY_ON;
 
-       /* Experimental measurements - boundary 11/5.5 Mb/s */
-       /* Note : with or without the (local->rssi), results
-        * are somewhat different. - Jean II */
+       /* Experimental measurements - boundary 11/5.5 Mb/s
+        *
+        * Note : with or without the (local->rssi), results
+        * are somewhat different. - Jean II
+        */
        range->avg_qual.qual = 50;
        range->avg_qual.level = 186;    /* -70 dBm */
        range->avg_qual.noise = 0;
@@ -1500,7 +1506,8 @@ static inline char *ks_wlan_translate_scan(struct net_device *dev,
                                 ap->ssid.body);
 
        /* Rate : stuffing multiple values in a single event require a bit
-        * more of magic - Jean II */
+        * more of magic - Jean II
+        */
        current_val = current_ev + IW_EV_LCP_LEN;
 
        iwe.cmd = SIOCGIWRATE;
@@ -1572,7 +1579,8 @@ static inline char *ks_wlan_translate_scan(struct net_device *dev,
        }
 
        /* The other data in the scan result are not really
-        * interesting, so for now drop it - Jean II */
+        * interesting, so for now drop it - Jean II
+        */
        return current_ev;
 }
 
@@ -1599,7 +1607,8 @@ static int ks_wlan_get_scan(struct net_device *dev,
 
        if (priv->aplist.size == 0) {
                /* Client error, no scan results...
-                * The caller need to restart the scan. */
+                * The caller need to restart the scan.
+                */
                DPRINTK(2, "aplist 0\n");
                return -ENODATA;
        }
@@ -1974,12 +1983,13 @@ static int ks_wlan_get_encode_ext(struct net_device *dev,
                return -EPERM;
 
        /* for SLEEP MODE */
-       /*  WPA (not used ?? wpa_supplicant)
-          struct ks_wlan_private *priv = (struct ks_wlan_private *)dev->priv;
-          struct iw_encode_ext *enc;
-          enc = (struct iw_encode_ext *)extra;
-          int index = dwrq->flags & IW_ENCODE_INDEX;
-          WPA (not used ?? wpa_supplicant) */
+       /* WPA (not used ?? wpa_supplicant)
+        * struct ks_wlan_private *priv = (struct ks_wlan_private *)dev->priv;
+        * struct iw_encode_ext *enc;
+        * enc = (struct iw_encode_ext *)extra;
+        * int index = dwrq->flags & IW_ENCODE_INDEX;
+        * WPA (not used ?? wpa_supplicant)
+        */
        return 0;
 }
 
@@ -2109,7 +2119,8 @@ static struct iw_statistics *ks_get_wireless_stats(struct net_device *dev)
        }
 
        /* Packets discarded in the wireless adapter due to wireless
-        * specific problems */
+        * specific problems
+        */
        wstats->discard.nwid = 0;       /* Rx invalid nwid      */
        wstats->discard.code = 0;       /* Rx invalid crypt     */
        wstats->discard.fragment = 0;   /* Rx invalid frag      */
@@ -3362,8 +3373,10 @@ void send_packet_complete(void *arg1, void *arg2)
        }
 }
 
-/* Set or clear the multicast filter for this adaptor.
-   This routine is not state sensitive and need not be SMP locked. */
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * This routine is not state sensitive and need not be SMP locked.
+ */
 static
 void ks_wlan_set_multicast_list(struct net_device *dev)
 {