drm/radeon/kms: add support for thermal chips on combios asics

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 8caf546c8e92f189d6576939081b7afa1a7a33c2..089ab92ad084f2eeeb4e10cee5a6e3af5fb4ed29 100644 (file)
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -2504,6 +2504,12 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev)
        return true;
 }
 
+static const char *thermal_controller_names[] = {
+       "NONE",
+       "lm63",
+       "adm1032",
+};
+
 void radeon_combios_get_power_modes(struct radeon_device *rdev)
 {
        struct drm_device *dev = rdev->ddev;
@@ -2524,6 +2530,54 @@ void radeon_combios_get_power_modes(struct radeon_device *rdev)
                return;
        }
 
+       /* check for a thermal chip */
+       offset = combios_get_table_offset(dev, COMBIOS_OVERDRIVE_INFO_TABLE);
+       if (offset) {
+               u8 thermal_controller = 0, gpio = 0, i2c_addr = 0, clk_bit = 0, data_bit = 0;
+               struct radeon_i2c_bus_rec i2c_bus;
+
+               rev = RBIOS8(offset);
+
+               if (rev == 0) {
+                       thermal_controller = RBIOS8(offset + 3);
+                       gpio = RBIOS8(offset + 4) & 0x3f;
+                       i2c_addr = RBIOS8(offset + 5);
+               } else if (rev == 1) {
+                       thermal_controller = RBIOS8(offset + 4);
+                       gpio = RBIOS8(offset + 5) & 0x3f;
+                       i2c_addr = RBIOS8(offset + 6);
+               } else if (rev == 2) {
+                       thermal_controller = RBIOS8(offset + 4);
+                       gpio = RBIOS8(offset + 5) & 0x3f;
+                       i2c_addr = RBIOS8(offset + 6);
+                       clk_bit = RBIOS8(offset + 0xa);
+                       data_bit = RBIOS8(offset + 0xb);
+               }
+               if ((thermal_controller > 0) && (thermal_controller < 3)) {
+                       DRM_INFO("Possible %s thermal controller at 0x%02x\n",
+                                thermal_controller_names[thermal_controller],
+                                i2c_addr >> 1);
+                       if (gpio == DDC_LCD) {
+                               /* MM i2c */
+                               i2c_bus.valid = true;
+                               i2c_bus.hw_capable = true;
+                               i2c_bus.mm_i2c = true;
+                               i2c_bus.i2c_id = 0xa0;
+                       } else if (gpio == DDC_GPIO)
+                               i2c_bus = combios_setup_i2c_bus(rdev, gpio, 1 << clk_bit, 1 << data_bit);
+                       else
+                               i2c_bus = combios_setup_i2c_bus(rdev, gpio, 0, 0);
+                       rdev->pm.i2c_bus = radeon_i2c_lookup(rdev, &i2c_bus);
+                       if (rdev->pm.i2c_bus) {
+                               struct i2c_board_info info = { };
+                               const char *name = thermal_controller_names[thermal_controller];
+                               info.addr = i2c_addr >> 1;
+                               strlcpy(info.type, name, sizeof(info.type));
+                               i2c_new_device(&rdev->pm.i2c_bus->adapter, &info);
+                       }
+               }
+       }
+
        if (rdev->flags & RADEON_IS_MOBILITY) {
                offset = combios_get_table_offset(dev, COMBIOS_POWERPLAY_INFO_TABLE);
                if (offset) {