#include <linux/pci.h>
#include <linux/ath9k_platform.h>
#include <linux/delay.h>
+#include <linux/rtl8366_smi.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#define WNDR3700_GPIO_BTN_RESET 8
#define WNDR3700_GPIO_BTN_WIFI 11
+#define WNDR3700_GPIO_RTL8366_SDA 5
+#define WNDR3700_GPIO_RTL8366_SCK 7
+
#define WNDR3700_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
}
};
+static struct rtl8366_smi_platform_data wndr3700_rtl8366_smi_data = {
+ .gpio_sda = WNDR3700_GPIO_RTL8366_SDA,
+ .gpio_sck = WNDR3700_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wndr3700_rtl8366_smi_device = {
+ .name = "rtl8366-smi",
+ .id = -1,
+ .dev = {
+ .platform_data = &wndr3700_rtl8366_smi_data,
+ }
+};
+
static void __init wndr3700_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
ar71xx_set_mac_base(mac);
- ar71xx_add_device_mdio(0x0);
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+ ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
+ ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
ARRAY_SIZE(wndr3700_gpio_buttons),
wndr3700_gpio_buttons);
+ platform_device_register(&wndr3700_rtl8366_smi_device);
wndr3700_pci_init();
}